OneTouch 4.6
May 2013
05-0796-100
Xerox® DocuMate® 3115
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Safety Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operational Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Warning - Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Electrical Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disconnect Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Emergency Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Product Safety Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Environmental Health and Safety Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
The Xerox DocuMate 3115 Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connect the Scanner Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connect the Scanner Power to the Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connect the Scanner Power to the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Install the Software and Connect the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the Scanner Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Connect the USB Cable and Turn on the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installing Visioneer OneTouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installing Additional Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Register Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Scan from the OneTouch Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Xerox® DocuMate® 3115
User’s Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan from the Input Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Scan from the Front Feed Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Scan Using AutoLaunch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Turn AutoLaunch Off/On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Default OneTouch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Scan from the OneTouch Button Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Changing the Button Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Selecting Options for OneTouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Scan Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Page Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Redaction Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
File Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Create Single Image Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Image Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Text Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configure Before Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
To Scan Using Configure Before Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Open Scanned Document(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Transfer to Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Setting the Folder from Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Scanning to Multiple Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Burn to CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Printer or Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
PaperPort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
SharePoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
SMTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Email Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Email Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Xerox® DocuMate® 3115
User’s Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Adding Text Editor Applications to OneTouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Creating an HTML Web Page from Your Scanned Documents . . . . . . . . . . . . . . . . . . . . . . . 106
Still Image Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Image Editors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Adding Image Editor Applications to OneTouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Send to Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Scanning to Multiple Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Scanning with Job Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Scanning with Optical Character Recognition (OCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Text Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Selecting OneTouch OmniPage OCR Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
The OCR Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Editing User Dictionaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
The Format Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
The Acuity Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Hardware Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Accessing the Scanner Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Locked Scanning Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Using the Preview Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Scan Regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Reordering Regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Document Source Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Exporting Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Xerox® DocuMate® 3115
User’s Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabled Options in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Main Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Advanced Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Disabled Options in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Main Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Color Processing Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Advanced Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Driver Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Disabled Options in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Scanner Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Application Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Cleaning the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Replace the ADF Pad Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Replacing the Roller Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Error Light Troubleshooting Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Uninstalling Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
The Xerox DocuMate 3115 Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
The Xerox DocuMate 3115 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Basic Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Other Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Copy Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Xerox® DocuMate® 3115
User’s Guide
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Product Recycling & Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
USA & Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Energy Star for the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Xerox® DocuMate® 3115
User’s Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Xerox® DocuMate® 3115
User’s Guide
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as
needed to ensure the continued safe operation of your machine.
Your Xerox product and supplies have been designed and tested to meet strict safety requirements.
These include safety agency evaluation and certification, and compliance with electromagnetic
regulations and established environmental standards.
WARNING:
The safety and environment testing and performance of this product have been verified using Xerox materials
only. Unauthorized alterations, which may include the addition of new functions or connection of external
devices, may impact the product certification. Please contact your Xerox representative for more information.
Xerox® DocuMate® 3115
User’s Guide
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times:
Do These
•
•
Always follow all warnings and instructions that are marked on or supplied with the equipment.
Always use materials specifically designated for this product, the use of other materials may result
in poor performance and create a hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
•
•
Always exercise care when moving or relocating equipment.
Always locate the machine on a solid support surface that has adequate strength to support the
weight of the machine.
•
•
Always locate the machine in an area that has adequate ventilation and room for servicing.
Always unplug this equipment from the electrical outlet before cleaning.
NOTE: Your Xerox machine is equipped with an energy saving device to conserve power when the
machine is not in use. The machine may be left on continuously.
Do Not Do These
•
Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground
connection terminal.
•
•
Never attempt any maintenance function that is not specifically described in this documentation.
Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
•
•
•
Never locate the machine near a radiator or any other heat source.
Never override or “cheat” any of the electrical or mechanical interlock devices.
Never place this equipment where people might step on or trip on the power cord.
Caution: This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of
view.
Xerox® DocuMate® 3115
User’s Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Information
Warning - Electrical Safety Information
1. The power receptacle for the machine must meet the requirements stated on the data plate on
the rear of the machine. If you are not sure that your electrical supply meets the requirements,
please consult your local power company or an electrician for advice.
2. The socket outlet shall be installed near the equipment and shall be easily accessible.
3. Use the power cable that is supplied with your machine. Do not use an extension cord or remove
or modify the power cord plug.
4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure
whether or not an outlet is correctly grounded, consult an electrician.
5. Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground
connection terminal.
6. Do not place this equipment where people might step or trip on the power cable.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock devices.
9. Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
•
This product shall be operated from the type of electrical supply indicted on the product’s data
plate label. If you are not sure that your electrical supply meets the requirements, please consult
your local power company for advice.
•
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace
the outlet.
Xerox® DocuMate® 3115
User’s Guide
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine
as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable
from the electrical outlet.
Xerox® DocuMate® 3115
User’s Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the power
cable(s) from the electrical outlet(s).
•
•
•
•
•
•
The equipment emits unusual odors or makes unusual noises.
The power cable is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the machine.
The machine is exposed to water.
Any part of the machine is damaged.
Xerox® DocuMate® 3115
User’s Guide
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Information
1. Any operator product maintenance procedures will be described in the user documentation
supplied with the product.
2. Do not carry out any maintenance on this product which is not described in the customer
documentation.
3. Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could cause a dangerous condition.
4. Use supplies and cleaning materials only as directed in this manual.
5. Do not remove covers or guards that are fastened with screws. There are no parts behind these
covers that you can maintain or service.
6. Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the user manuals.
Xerox® DocuMate® 3115
User’s Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental Health and Safety Contacts
Contact Information
For more information on Environment, Health, and Safety in relation to this Xerox product and supplies,
please contact the following customer help lines:
USA & Canada:
Europe:
1-800-828-6571
+44 1707 353 434
Xerox® DocuMate® 3115
User’s Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Xerox® DocuMate® 3115
User’s Guide
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
2
This chapter includes:
•
•
•
•
Congratulations on purchasing your Xerox DocuMate 3115. With this scanner you can quickly scan
stacks of single-sided or double-sided pages and place their electronic images on your computer.
Xerox® DocuMate® 3115
User’s Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the Box
Before starting the software installation, please check the contents of the box to make sure that all
parts are included. If any items are missing or damaged, contact the dealer where you purchased the
scanner.
Replacement
ADF Pad
DocuMate 3115 Scanner
Docking Station
(Optional)
Power Cord
Power Supply
USB Cable
USB Power Cord
Installation Discs
Quick Install Guide
Technical
Support Card
Xerox® DocuMate® 3115
User’s Guide
20
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
Pentium 4 PC or AMD equivalent with:
•
•
A DVD-ROM drive
An available Universal Serial Bus (USB) port
•
Microsoft® Windows® operating system:
•
•
•
•
32-bit Windows XP (Service Pack 1 and 2)
32-bit or 64-bit Windows Vista (Service Pack 1)
32-bit or 64-bit Windows 7
32-bit or 64-bit Windows 8
The scanner is compatible with Service Pack 3 for Windows XP, Service Pack 2 for Windows Vista,
and Service Pack 1 for Windows 7.
•
•
Minimum of 2 gigabyte (GB) of internal memory (RAM)
350 MB minimum of free hard disk space
A VGA or SVGA Monitor:
•
The recommended settings for your monitor are:
•
•
Color quality of 16-bit or 32-bit
Resolution set to at least 800 x 600 pixels
Refer to your Windows documentation for instructions on setting the color quality and resolution for
the monitor.
Xerox® DocuMate® 3115
User’s Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Documentation
The following printed documentation is provided in the box:
•
•
Installation guide—abbreviated scanner setup and installation instructions.
Technical support card—contact information for technical support and customer service, and a
brief overview of our standard product warranty.
•
Warranty card—the warranty card is provided for users in Russia and should be filled in as
described on the card. For all other users, please dispose of this card in paper recycling.
The following soft-copy documentation is available on the installation disc:
•
•
•
Scanner user’s guide—contains detailed installation, configuration, scanning, and maintenance
instructions.
Nuance PaperPort user’s guide—contains detailed information using the application and managing
your scanned documents.
Nuance OmniPage user’s guide—contains detailed instructions on using the software, including
information on using Optical Character Recognition to create editable text files from the scanned
documents.
•
Nuance PDF Converter user’s guide—contains detailed information on using the application to
create and modify PDF files.
Xerox® DocuMate® 3115
User’s Guide
22
Download from Www.Somanuals.com. All Manuals Search And Download.
The Xerox DocuMate 3115 Scanner
1
2
3
6
5
4
7
8
1
2
3
4
Input Tray
Paper Guides
Front Feed Tray
Output Tray
5
6
7
8
Control Panel
Cover Release
USB Port
Power Jack
Input Tray—Holds a stack of documents in the scanner. Unfolds to support various paper lengths.
Paper guides—Adjust to support various document widths.
Front Feed tray—Open to feed items through the front of the scanner.
Output tray—Holds documents after being scanned.
Control panel—OneTouch scanning controls.
Power Switch & Scan Settings Dial—Turn the dial to the right to turn on the scanner power.
Numbers 1-6 represent the 6 OneTouch scan settings.
Status Light—Shows the scanner’s current status.
OneTouch Scanner Buttons—Press the Simplex or Duplex button to initiate scanning using the
scan settings for the current dial number.
Cover release—Opens the scanner cover.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Power jack—Connects the power cord to the scanner.
Xerox® DocuMate® 3115
User’s Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Xerox® DocuMate® 3115
User’s Guide
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpack and Assemble the Scanner
1. Remove the scanner from its protective foam and plastic bag.
2. Remove the tape and protective foam strips from the scanner body and input tray.
3. Lift the paper guide up from the scanner body. Push the tray back until it clicks in place.
If the tray isn’t fully seated in position, paper feeding from the input tray may jam in the scanner.
4. Pull the scanner cover release to open the scanner. Remove the foam strip from the inside of the
scanner. Close the cover when you are done.
5. Detach the scanner body from the docking station and remove the foam strip from the docking
station.
1. Press and hold the release button on the side of the docking station.
2. Tilt the scanner body towards the front and lift the scanner out of the Docking Station.
3. Remove the tape and foam strip from the docking station.
Xerox® DocuMate® 3115
User’s Guide
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Place the scanner body back on the docking station.
6. Unfold the Input Tray and Extension from the paper guide.
7. Pull the output tray away from the bottom of the Docking Station, then flip open the output tray
extension.
Xerox® DocuMate® 3115
User’s Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the Scanner Power Cord
You can power the scanner through the standard power cord to a wall outlet, or use the USB power cord
to power the scanner through a USB port on the computer.
Connect the Scanner Power to the Wall
1. Plug the power supply into the power port on the scanner.
NOTE: Only use the power supply (either HEG42-240100-7L made by HiTron or DA-24C24 made by
ADP) included with your scanner. Connecting any other type of power supply may damage your
scanner, and will void its warranty.
2. Plug the power cord into the power supply and into a wall outlet.
Xerox® DocuMate® 3115
User’s Guide
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the Scanner Power to the Computer
1. Plug the round end of the USB power cord into the power jack on the scanner.
2. Plug the flat end of the USB power cord into an available USB port on the back of the computer.
We do not recommend using a USB hub to power the scanner.
NOTE: Only use the USB power cable included with your scanner. Connecting any other type of USB
power cable may damage your scanner, and will void its warranty. If you do not have your USB power
cable, you can order a new one by contacting our Customer Service department. Please refer to the
Technical Support Card, included with your scanner, for our company contact information, or visit the
Parts & Accessories page for your scanner at www.xeroxscanners.com.
Xerox® DocuMate® 3115
User’s Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Detach or Attach the Xerox DocuMate 3115
The Xerox DocuMate 3115 scanner body can be removed from the Docking Station to be used as a
mobile scanner.
Detach the Scanner Body from the Docking Station
1. Press and hold the release button on the side of the Docking Station.
2. Tilt the scanner body towards the front of the Docking Station to release the scanner from the
arms in the Docking Station.
You can release the button on the Docking Station.
3. Set the scanner body on the desk.
Xerox® DocuMate® 3115
User’s Guide
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach the Scanner Body to the Docking Station
1. Place the front of the scanner body in the front of the Docking Station.
2. Tilt the scanner body into the Docking Station and press on the back of the scanner to lock it into
the Docking Station.
Xerox® DocuMate® 3115
User’s Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Xerox® DocuMate® 3115
User’s Guide
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Please make sure of the following before you begin installation:
•
The information in this guide may cover software not provided with the scanner you purchased.
Please disregard any information about the software not applicable to your scanner.
•
If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or
messages during installation asking you to allow the installation to proceed. Although the
messages will differ based on the software your computer is running, in each case you should
allow the installation to proceed if that option is available. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner, but if you do, make sure to turn
it back on again when installation is finished.
•
•
If you already have a scanner connected to your computer, it is recommended that you remove
that scanner’s driver program prior to installing your Xerox scanner. You can remove these
programs from the Windows Control Panel. Please refer to the user manual provided with your
other scanner hardware for instructions about removing the driver and software for that unit.
If your computer is running Windows Vista or later, you may see the Windows User Account
Control screen asking you to confirm system changes. Click the Yes button to allow the installation
to proceed.
Xerox® DocuMate® 3115
User’s Guide
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Software and Connect the Scanner
1. Start Microsoft Windows and make sure that no other applications are running.
2. Insert the installation disc into your computer’s DVD-ROM drive.
The disc automatically starts.
3. The Select Language window opens. Click the drop-down menu arrow and select the language to
use. Click OK.
The disc’s Main menu window opens.
Note: If the disc does not start, check the following:
•
•
Make sure the disc drive’s door is completely shut.
Make sure the disc was inserted in the drive in the proper direction (label side up).
To launch the disc manually:
•
•
•
Open the Windows options for your computer’s disc drives.
Double-click the icon for your DVD-ROM drive.
The Installation menu for the disc should now open.
If the menu does not open:
From the list of files on the disc, double-click the file named setup.exe.
•
Xerox® DocuMate® 3115
User’s Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. On the Main menu, select Install software.
5. Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any other
applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the
window.
6. Click Install now.
Installing the Scanner Driver
The scanner driver installation will start first.
Xerox® DocuMate® 3115
User’s Guide
36
Download from Www.Somanuals.com. All Manuals Search And Download.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
2. On the Xerox License Agreement window, read the license agreement. If you accept the terms,
select I Agree then click Next.
If you choose not to accept the license agreement, click Cancel. Click Close on the Installation
Interrupted window.
3. The software will now be installed.
4. Stop when you see the “Complete the installation by connecting your hardware” window. Do not
click OK yet. Leave the window open and proceed to the next section.
NOTE: If you do not see this on-screen diagram for connecting the scanner, stop and follow the
instructions below.
Xerox® DocuMate® 3115
User’s Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the USB Cable and Turn on the Power
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Check
your computer’s manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the
plug into either connection.
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and automatically
loads the appropriate software to run the scanner.
Xerox® DocuMate® 3115
User’s Guide
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When you’re certain that the software has completely loaded, return to the “Complete the
installation by connecting your hardware” window.
5. Click OK to complete the installation process.
6. Click Close on the Installation Complete window to close and exit the driver installer.
Installing Visioneer OneTouch
The Visioneer OneTouch software installation will start automatically after you click Close on the driver
Installation Complete window.
Xerox® DocuMate® 3115
User’s Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click Next on the Welcome to the OneTouch Setup Wizard.
2. On the Visioneer License Agreement window, read the license agreement. If you accept the terms,
select I Agree then click Next.
If you choose not to accept the license agreement, the installation will terminate and OneTouch
will not be installed.
3. Click Close on the Installation Complete window to close and exit the software installer.
NOTE: If you selected other software to install from the DVD the installation for that software will
automatically start after you click Close on the Installation Complete window. Follow the instructions
on-screen to install each application you selected.
Xerox® DocuMate® 3115
User’s Guide
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Additional Applications
Your scanner includes free, additional applications as described in the table below.
1. Return to the disc’s Main menu and click Install software.
2. Select the additional applications you want to install, then click Install now.
3. Follow the instructions on the screen to install each of the additional applications.
Software
About the Software
®
PaperPort is a document management software application. The PaperPort
scanning features allow you to insert new pages into an existing file and name your
file immediately after scanning. From within the PaperPort desktop you can sort
your documents and move them between folders as you would through the
Windows My Documents folder. You can reorder the pages in a PDF file, and unstack
a document so all the pages are resaved as individual files. PaperPort also has some
basic image editing options in the PaperPort PageView, such as; adding notes to
image files, modifying image colors, and touch up the image using the erase and/or
auto-correct options.
Nuance PaperPort
®
OmniPage Pro provides precision OCR analysis, advanced layout detection, and
Logical Form Recognition™ (LFR) technology. Advanced security features quickly
turn office documents and forms into over 30 different PC applications for editing,
searching and sharing. Custom workflows handle large volumes of documents, and
you can use its tools to print to PDF.
Nuance OmniPage
Xerox® DocuMate® 3115
User’s Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Software
About the Software
Nuance PDF Converter
PDF Converter Professional 7 features 100% industry-standard PDF creation and
®
editing plus the world’s most accurate PDF conversion to editable Microsoft
®
Office formats available. It also offers one-click scanning to PDF, the most
advanced PDF search capabilities, excellent graphics management, document
flattening and auto-removal of sensitive information. Combining unparalleled
functionality, built-in intelligence and ease of use, PDF Converter Professional 7
enables users to create, convert, edit, assemble and securely share PDF files like
never before for enhanced professionalism, productivity and collaboration.
Xerox® DocuMate® 3115
User’s Guide
42
Download from Www.Somanuals.com. All Manuals Search And Download.
View the User Guides
1. Return to the disc’s Main menu and click on View user guides.
2. Click on View scanner documentation to access the scanner user guide.
Click on View software documentation to access the user guides for the software applications
provided with the scanner.
3. Click the links of the guides you want to view.
4. When you’re finished, click Main menu to return to the Main menu window and click Exit.
5. Remove the installation disc and store it in a safe place.
That’s it! Installation is finished and your Xerox scanner is ready to scan.
Xerox® DocuMate® 3115
User’s Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Register Your Scanner
Registering your scanner is important as it provides you with access to our free telephone support
service. Registration also gives you free access to software updates for your scanner.
To register your scanner:
You will need an active internet connection to register your scanner. If you do not have internet access
you can contact our customer service department to register the scanner. Please refer to the Technical
Support Card, that you received with the scanner, for our customer service contact information.
1. Open an Internet Explorer window, or any other internet browser you have installed on your
computer.
2. In the web address field type www.xeroxscanners.com.
3. Press Enter on your computer’s keyboard or click the option on screen to go to the web address.
4. When the Xerox scanners web page loads click on Register Your Product.
5. Fill in the registration form, all required fields have an asterisk (*).
A valid email address is required for registration.
You will be asked to enter the serial number for the scanner, it is located on the back or underside
of the scanner.
6. After filling in the form, click on Submit Your Registration to complete the registration.
Xerox® DocuMate® 3115
User’s Guide
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents to
Scan
5
This chapter includes:
•
•
•
This chapter illustrates scanning with the buttons on the scanner. After loading documents in the
scanner, as described below, you can also scan using the OneTouch Button Panel on screen, or using a
scanning application.
NOTE: Always remove any staples or paper clips from documents before inserting them into the
scanner. Staples and paper clips can jam the feed mechanism and scratch the internal
components. Also remove any labels, stickers, or Post-It™ notes that may come off during the
scanning process and get stuck in the scanner. Misuse as described here will void your scanner’s
warranty.
Xerox® DocuMate® 3115
User’s Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan from the OneTouch Buttons
Turn the control dial to the setting you want to use to scan, align the number to the registration mark
on the scanner.
Registration mark
Scan from the Input Tray
First, if the front feed tray is open, close it before scanning from the input tray. The paper will jam in the
scanner if the front feed tray is open while scanning from the input tray.
1. Adjust the paper guide for the width of paper, and make sure the input and output trays are fully
extended.
Xerox® DocuMate® 3115
User’s Guide
46
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Load the documents into the scanner face down with the tops of the page inserted into the
scanner.
3. For one-sided scanning press the Simplex button.
For two-sided scanning press the Duplex button.
Scan from the Front Feed Tray
Scan from the Front Feed tray when the scanner body is not attached to the Docking Station. When the
scanner is attached to the Docking Station, you can still scan using the front feed tray for single items
such as thick paper, embossed plastic cards, plastic identification cards, business cards, and other
items.
NOTE: Do not attempt to load documents into the Docking Station input tray while you have an item in
the scanner fed in from the front. You can only load items into the scanner from either the Front Feed
tray or the input tray at each scan time. The scanner will jam if you load paper into the input tray after
an item has already been fed into the front.
Xerox® DocuMate® 3115
User’s Guide
47
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Place an item face up, on the front feed tray, aligned to the registration marks on the tray and
insert it into the front of the scanner.
2. For one-sided scanning press the Simplex button.
For two-sided scanning press the Duplex button.
Xerox® DocuMate® 3115
User’s Guide
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan Using AutoLaunch
This option is in the Application Settings for your scanner’s hardware properties.
When you insert an item into the front feed tray, it is automatically scanned and the image is sent to a
destination location or application on your computer, or to a network drive.
If you want to scan from OneTouch button panel on screen, or to be able to place a page in the scanner
and wait until you are ready to initiate the scan, you can turn the AutoLaunch feature off.
Turn AutoLaunch Off/On
1. Click on the OneTouch icon in the Windows notification area on the right side of the screen.
The OneTouch Icon
2. Click on the scanner icon to the right of the green buttons, in the title bar of the OneTouch button
panel.
The Scanner Icon
3. Click on the Properties button in the hardware properties window.
Xerox® DocuMate® 3115
User’s Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
4. In the Application Settings tab, click on Turn on AutoLaunch for Front Feed Scanning to select/
deselect this option.
5. Click on OK to save the changes and close the window. Click on OK to close the Hardware
Properties window.
•
Function—select the OneTouch function number that you want to use for automatic front-
feed scanning. Select Current to always use the current function number shown on the
scanner display.
6. Flip open the front feed tray from the scanner body.
Xerox® DocuMate® 3115
User’s Guide
50
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Turn the control dial to the setting you want to use to scan, align the number to the registration
mark on the scanner.
Registration mark
8. Place an item face up, on the front feed tray, aligned to the registration marks on the tray and
insert it into the front of the scanner.
9. The scanner pulls in the item, scans and ejects it out of the front.
10. A scan progress window opens and the image(s) are sent to the selected application in the
OneTouch software for the currently selected control dial number.
Xerox® DocuMate® 3115
User’s Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Interfaces
If you selected the recommended installation options, then you have several different options to scan
with your Xerox DocuMate 3115 scanner. Each method scans equally well, so use the one with
appropriate options for the item you are scanning.
•
OneTouch—When you press either the Simplex or Duplex button, documents are
scanned using the scan settings assigned to the selected number on the dial. The
scanned images are then sent to a destination on your computer or network drive.
•
•
OneTouch Button Panel—Use this scan option when you want to scan
from the computer screen. Scanning from the on-screen OneTouch
Button Panel is the same as selecting a scanning option on the scanner,
except you click an icon that represents the function number. See Scan
TWAIN and WIA Interface—This option uses your scanner’s
TWAIN interface to scan. Select scanning options before
scanning, put the document in the scanner, then click the
Scan button in the TWAIN interface window. See Scanning
Xerox® DocuMate® 3115
User’s Guide
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Based on the recommended full installation of the scanner driver and the Visioneer OneTouch
software, OneTouch is your main scanning interface for using the scanner.
The OneTouch Button Panel, that you see on the computer screen, shows the pre-set function for each
button (such as Email) and the icon of the destination (called the Destination Application) where the
images will be sent when scanning is finished.
The OneTouch button panel shows which application
the button is configured to send images to.
Xerox® DocuMate® 3115
User’s Guide
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Default OneTouch Settings
When you installed the scanner, the software configured each OneTouch button with appropriate
settings consisting of: a Destination Application, a Scan Configuration, and a File Format. The button
names, such as Email or Copy, indicate the original factory settings for a button. You can change any of
For example, the Email button is set up to scan documents then immediately attach them to a new
email message in your default email program. The email application will default to the email program
specified in the internet options of Internet Explorer.
A folder icon for a button means that the button is set up to archive the scanned item. The scanner
sends the scanned image directly to a folder without opening the image first in a software application.
A question mark for a button means your computer does not have the appropriate software or
hardware for the initial factory settings.
If the OneTouch OmniPage Module is not installed, then the options for sending to word processing
applications such as Microsoft Word will not be available. The OneTouch OmniPage module is installed
automatically when you install Visioneer OneTouch from the installation disc.
NOTE: The default page size in each configuration is based on your computer’s Windows Measurement
system selection of U.S. (United States) or Metric units.
•
If U.S. is the selected measurement, the default page size in each profile will be based on the
United States standard paper sizes such as 8.5 x 11 inches.
•
If Metric is the selected measurement, the default page size in each profile is based on the ISO
216 standard and the majority of the profiles will default to A4.
Xerox® DocuMate® 3115
User’s Guide
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan from the OneTouch Button Panel
Scanning from the button panel on your computer’s screen works like pressing a button on the scanner.
The scanner scans the item, then sends the image to the Destination Application indicated by the
button’s icon.
To scan from the OneTouch Button panel:
1. Load the documents into the scanner.
2. Click on the OneTouch icon in the Windows notification area (at the lower right corner of the
screen.)
OneTouch Icon
3. The OneTouch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the OneTouch
button you are using to scan.
Features of the OneTouch Button Panel
The OneTouch panel is your on-screen set of controls for the scanner. From the panel you can access
the hardware settings for your scanner and configure the Scan button.
Xerox® DocuMate® 3115
User’s Guide
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Click on the OneTouch icon to open the panel.
The Button View
The Detail View
The Hardware View
The Title Bar
•
•
•
Green arrows—click to cycle through the panel’s 3 views.
Scanner icon—click to open the scanner’s hardware properties.
Red “X”—click to close the OneTouch panel.
The Button View
•
•
•
Left-click on a Destination Application icon to start scanning.
Right-click on a Destination Application icon to open the OneTouch Properties.
Left-click on the arrow buttons, on the right side of the panel, to view the rest of the OneTouch
buttons.
The Detail View
•
•
•
Left-click on a Destination Application icon to start scanning.
Right-click on a Destination Application icon to open the OneTouch Properties.
Single-click on the detailed information to open the OneTouch Properties.
The Hardware View
•
•
Left-click on the scanner icon to return to the Button view.
Right-click on the scanner icon to open the scanner’s hardware properties.
Xerox® DocuMate® 3115
User’s Guide
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Button Settings
1. Click on the OneTouch icon.
2. Right-click a button on the OneTouch Button Panel.
3. The OneTouch Properties window opens.
The OneTouch Properties window will also open when you press, hold down for 3 seconds, and
release a scanner button.
Scanner button
configuration tab
Select a file
format for your
scanned images.
Select the Destination
Application that will
open when you are
finishedscanning. You
use the destination
application to view
and work with your
scanned images.
Select a
configuration for
scanning the item.
Some of the options on the OneTouch Properties Window are “grayed out” and are not available,
these options are not appropriate for your scanner model.
4. If your scanner has multiple scanner buttons, or an LED function selector on the scanner, select
the button in OneTouch that you want to change.
LED Number—Click the up or down arrow to cycle through the OneTouch buttons.
Button Tabs—Click on one of the tabs, across the top of the OneTouch properties window, to
configure that scanner button. There is one tab for each button on the scanner as well as the
Options tab to change button specific features.
5. Select the destination you want OneTouch to send the scanned image to in the Select destination
list.
If you select a word processing program such as Microsoft WordPad or Microsoft Word that can be
used for OCR (such as TXT or RTF), the text in scanned images is automatically converted to word
processing text.
Xerox® DocuMate® 3115
User’s Guide
58
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select a file format in the Select format panel.
The formats are based on the type of Destination Application you select. The icon names indicate
7. Select a scanning configuration in the Select configuration list.
The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness
(Br), and contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon
8. Click on OK to save the changes.
9. Place an item in the scanner and click the OneTouch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and scan
configuration you specified.
Properties button—displays a window for selecting properties for a destination. This button is disabled if
the selected destination application does not have global configuration properties.
Refresh button—updates the links between all your computer’s Destination Applications and OneTouch.
If you install new software that can be used as a Destination Application, click the Refresh button to link
the new software to OneTouch.
New/Copy/Edit/Delete buttons—click New or Copy to add new scan configurations to the list. Click Edit or
Delete to change or remove them.
OK/Cancel/Apply buttons—OK accepts any changes and closes the window. Apply accepts any changes
but leaves the window open so you can continue making additional changes. Cancel closes the window
without accepting any changes.
Xerox® DocuMate® 3115
User’s Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Options for OneTouch
Use the Options tab to configure how OneTouch works with the selected button, such as which
destinations are available, or what the file name should be.
Select Button—click the down arrow and select the button for which you want to modify the settings
from the list. The options you choose in this window only apply to the button you select in this list.
Show all destinations—this option selects all of the Destination Application categories. The list of
Destination Applications available for the selected button will include all the applications on your
computer that fall into these categories.
Select destinations—select this option to individually choose the types of applications to include in the
list of Destination Applications. Check the boxes for the type of application to include.
Destination Categories:
•
Document management includes Nuance PaperPort and other applications for processing and
keeping track of your scanned documents. This category includes the Send to Application and
Open Scanned Document(s) destinations.
•
•
Image editors include Microsoft Paint and other drawing and graphics applications.
Text editors include Microsoft Word and WordPad, Microsoft Excel, and other word processing and
spreadsheet applications. Select this option if you want OCR processing to convert your scanned
documents to text that you can edit.
•
•
PDF applications are for viewing and/or editing Adobe PDF files.
Email includes Microsoft Outlook and other email applications, as well as the SMTP destination
which allows you to scan directly to the SMTP server without opening an email client application.
•
Storage and CD-R/W is for scanning directly to a folder on the computer, server, FTP server,
SharePoint site, or to the Windows CD temp directory for burning the files to a CD.
Xerox® DocuMate® 3115
User’s Guide
60
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Fax and Print is for sending your scanned documents directly to your printer or fax software.
STI event forwarding is for using another application’s interface for scanning. The OneTouch Event
Forwarding dialog box opens so you can select which application to use to continue scanning.
Enable scanning to multiple destinations—select this option to allow for multiple destinations to be
selected, in the destination list, on the OneTouch configuration tab. This feature allows you to scan one
time while distributing the file to multiple destinations. Please refer to Scanning to Multiple
Instant delivery—enables image transfer to the destination while scanning is in progress, provided that
Create Single Image Files is also selected. If Create single image files is not selected, image transfer
occurs after all pages have been scanned.
Show progress window—select this option to display the progress window of the document(s) during
scanning.
Use job separator when scanning multiple pages—select this option to have the scanner separate
multiple page scan jobs into separate files when scanning is complete.
•
When a blank page is detected—select this option to have a new file created each time a blank
page is detected in the stack of pages being scanned. Note that when scanning duplex, both sides
of the page must be blank.
•
When the number of images reaches—select this option, and input a number in the box, to have a
new file created each time the number of images scanned reaches the number you input in this
field. Note that when scanning duplex, the number of images detected is twice the number of
pages scanned. For example, if you input “5” in the field, and scan 10 pages, 20 images are
captured, and you will get 4 separate files with 5 images in each file.
with job separation, and how it works with other options in OneTouch.
Use custom file naming—select this option to enable the input field so that you can specify the file
name for your scanned document(s). You can specify a different file name for each OneTouch button.
When this option is not select, the file name is automatically generated by OneTouch for all scans.
•
The preview area, to the right of the Use custom file naming text, shows an example of the
filename as you type into the input field and/or select token options from the list.
•
Type the file name you want into the input field. Note that you cannot input these characters in a
file name: \ / : * ? “ < > |
When inputting a file name, the file name must be unique, otherwise every scan created would
overwrite the previous scan. The menu to the right of the input field contains a list of tokens you
can select to create unique file names. These tokens include counting numbers, date and time
values, number of pages scanned, and so on. If the button name is not unique, you will see an on-
screen notification that a {BatchID} and {#b} will be inserted into the name.
•
Click the down arrow and selected a token value from the list, then click the arrow button to add
that value to the file name field. The token values are:
•
•
•
•
{FN}—inserts the scanner name.
{#b}—inserts the image number without adding zero (1).
{#03b}—inserts a 3-digit image number in the scan batch (001).
{D}—inserts the numeric day of the month without a zero added to single-digit days (4).
Xerox® DocuMate® 3115
User’s Guide
61
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
{DD}—inserts the numeric day of the month with a zero added to single-digit days (04).
{DDD}—inserts the abbreviated 3-letter day (Mon).
{DDDD}—inserts the full name of the day (Monday).
{M}—inserts the numeric month without a zero added to single-digit months (8).
{MM}—inserts the numeric month with a zero added to single-digit months (08).
{MMM}—inserts the abbreviated 3-letter month (Aug).
{MMMM}—inserts the full name of the month (August).
{YY}—inserts the two-digit year (97).
{YYYY}—inserts the four-digit year (1997).
{h}—inserts the 12-hour clock hour without a zero added to single-digit time values (2).
{hh}—inserts the 12-hour clock hour with a zero added to single-digit time values (02).
{H}—inserts the 24-hour clock hour without a zero added to single-digit time values (2).
{HH}—inserts the 24-hour clock hour with a zero added to single-digit time values (02).
{m}—inserts the minute without a zero added to single-digit time values (7).
{mm}—inserts the minute with a zero added to single-digit time values (07).
{s}—inserts the second without zero added to single-digit time values (9).
{ss}—inserts the second with zero added to single-digit time values (09).
{User}—inserts the user name.
{Mach}—inserts the computer name.
{Dest}—inserts the destination application name.
{Bttn}—inserts the button name.
{Mode}—inserts the scan color mode.
{Size}—inserts the page size.
{BatchID}—inserts a unique batch identification number.
Technical Note
Some destination application links, such as the NewSoft Presto! BizCard software, require a specific
filename format for the images that have been sent to the link to open correctly in the application. For
example, when scanning duplex, if the image token {#03b} is not included in the filename, then each
image sent will be regarded as a separate scan, and instead of one file with 2 pages you will have 2
files. As each destination application link is different, there is no standard filename type you can create
to use for all destinations. If you scan and the images are not grouped in the file(s) as needed, try
deselecting Use custom file naming and then scan again.
Xerox® DocuMate® 3115
User’s Guide
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan Configurations
The scan configurations are where you select the scanning resolution, brightness, mode (color, black &
white, or grayscale), and a number of other settings. To see a selected scan configuration’s settings,
click its icon. Click the icon again to close the detailed information.
Click the icon of a selected
configuration to view its
settings.
Select the scan configuration
to edit or delete. It must be
unlocked, as indicated by not
having a lock displayed here.
NOTE: Use Configure Before Scan if you want to set the options manually before scanning. See
Create a new configuration:
•
Click the New button to create a new configuration starting with the OneTouch default
configuration settings.
•
Select a configuration in the list, then click on the Copy button to create a new configuration
starting with the settings of the currently selected configuration.
Edit or delete a configuration:
Select the scan configuration you want to edit or delete.
•
•
To delete the configuration, click the Delete button.
To edit the configuration, click the Edit button.
Edit the settings and click OK.
NOTE: Your scanner comes with a number of configurations pre-set at the factory. To ensure that your
scanner will always have a set of correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they are not inadvertently deleted.
That way, you will always have the factory-settings available. If you do delete or edit them, and want
to get the factory pre-sets back again, you will need to uninstall then re-install your scanner.
Xerox® DocuMate® 3115
User’s Guide
63
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Scan Configuration Properties window, the Scan Settings, Page Settings, Advanced Settings, and
Redaction Settings tabs are always available. When the Visioneer Acuity module is installed, the Acuity
Settings tab will also be available for all destinations.
Based on the selected destination, additional settings tabs may also be available. If you see one of
these additional settings tabs please refer to the appropriate section, as listed below, for instructions
on configuring these destination specific options.
•
Use the Storage Options tab to choose the storage folder for scans sent to the Transfer to Storage
•
•
Use the PaperPort tab to choose the destination folder, in the Nuance PaperPort application, as
described on page 89.
•
•
•
Use the SharePoint tab to specify a SharePoint site, user credentials, and destination folder, as
described on page 92.
Use the FTP Transfer tab to specify an FTP site, user credentials, and destination folder, as
described on page 95.
Use the SMTP Configuration tab to specify an SMTP server, user credentials, and destination email
address, as described on page 98.
Scan Settings Tab
On the Scan Configuration Properties dialog box, type a name.
Type a new name for the
configuration.
If the configuration is
locked, click the lock to
unlock it. The icon
becomes a key.
Select the scan mode and
drag the slider to set the
resolution.
Drag the sliders to set the
Brightness and Contrast.
Mode—select a scanning mode:
•
Black&White to scan in black and white. For example, letters and memos are usually scanned in
black and white.
•
•
Grayscale to scan items such as documents containing drawings or black and white photographs.
Color to scan color photographs and other color items. Color scans have the largest file size.
Resolution—drag the slider to the right or left to adjust the dots per inch (dpi) of the resolution. The
higher the dpi setting, the sharper and clearer the scanned image. However, higher dpi settings take
longer to scan and produce larger files for the scanned images.
Xerox® DocuMate® 3115
User’s Guide
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness—sometimes an image is scanned with the brightness and contrast set too light or too dark.
For example, a note written with a light pencil may need to be scanned darker to improve legibility.
Increasing or decreasing the brightness makes the scanned image lighter or darker.
Contrast—the difference between the lighter and darker portions of the image. Increasing the contrast
emphasizes the difference between the lighter and darker portions, decreasing the contrast de-
emphasizes that difference.
Key and Lock icon—if you want to lock the configuration, click the key icon to change it from a Key to a
Lock.
Page Settings Tab
The options on the Page Settings tab will be available based on either the selected color mode (Black &
White, Grayscale, or Color), or based on whether or not the scanner hardware supports the feature.
Click the name to
toggle between
inches and
millimeters.
Standard—click the menu arrow and choose a page size from the list.
Custom—enter the horizontal and vertical page dimensions in the boxes. Click the name of the units,
inches or millimeters, to toggle between them.
Improvements and Settings—it is indicated in the feature description if there is a software or hardware
dependency for the option to be available.
•
Duplex—scan both sides of the page. This option is only available if the scanner supports this feature.
The Simplex and Duplex buttons on the scanner take precedence over the One Touch settings. In
other words, if the LED number on the scanner is configured to scan as Duplex, but you press the
Simplex button, the scanner scans in Simplex, and vice versa.
Xerox® DocuMate® 3115
User’s Guide
65
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Reduce Moiré patterns—moiré patterns are wavy, rippled lines that sometimes appear on the
scanned images of photographs or illustrations, particularly newspaper and magazine
illustrations. Selecting Reduce moiré patterns will limit or eliminate moiré patterns in the scanned
image. This option is only available when scanning in Color or Grayscale at lower resolutions, and
when the scanner supports this feature.
If you are scanning using an Automatic Document Feeder, and the page is fed through at too
great of an angle, the image may not straighten correctly. In that case, re-scan the page using the
paper guides to feed the paper in straight.
Invert image—only available for Black&White Mode, this option reverses the black and whites of
an image.
Original Image
Inverted Image
•
Skip blank originals—select this option to have the scanner detect if a blank page has been fed
through the scanner, and remove it from the final file. Typically you might use this option when
scanning a stack of two-sided pages which have a number of blank sides.
Sensitivity—you can adjust the sensitivity level of the blank image detection.
Note that when the Options tab feature Use job separator in multi-page batch is enabled, and the
option selected is When a blank page is detected, the sensitivity level for Skip Blank Originals is the
sensitivity level that will be used when both features are enabled.
Note that when the feature Use job separator in multi-page batch is enabled, and the option
selected is When the number of images reaches, the blank originals are discarded before the images
are counted. For example, if you scan 3 pages in duplex mode, each side of the page is counted as
an image and the total number of images is 6. When Skip Blank Originals is enabled, and 2 of the
3 pages in the stack are blank on one side, the total number of images counted is 4 not 6.
Xerox® DocuMate® 3115
User’s Guide
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Settings Tab
Use the Advanced Settings tab to set color correction options for Color or Grayscale scanning. Drag the sliders
to the left and right to change the color settings. As you do, the image changes to show the effects of
the new settings.
•
•
•
Color saturation—the strength or purity of a color. This option is only available when the selected
scan mode is Color.
Color hue—the color your eyes see as reflected from the image. This option is only available when
the selected scan mode is Color.
Gamma—is the tone curve and the starting point for image enhancement. As you raise or lower
the Gamma value, the values at which saturation, hue, brightness and contrast affect the image
are changed. It is recommended that you keep the default Gamma value or adjust this setting
before adjusting the other options. This option is available for both Color and Grayscale scanning.
Redaction Settings Tab
Use the options on the Redaction Settings tab to remove a specified area in the scanned image.
Xerox® DocuMate® 3115
User’s Guide
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Please refer to the technical note, at the end of this section, for information about how this setting
works with other options in the OneTouch Scan Configuration you are modifying.
Enable redaction—select this option to enable redaction when scanning. You might use this option if
you want to remove a logo or image that appears on each page that you are scanning. You can choose
what color to fill in the redacted area in the scanned image, and set multiple areas. If you are scanning
in Duplex mode, you can specify the area separately for the front and back side of the pages.
Click Add to add a line item to the area list in this window. You can redact multiple areas from the
scanned image, click the Add button again to continue adding line items to the list. Select an item in
the list then click the Remove button to remove the specified redaction area from the list.
Side—click once on the word Front to show the Side option list. If you are using a simplex (one-sided)
scanner, only the Front option will be available. If your scanner supports duplex (two-sided) scanning,
the options Front, Back, and Both will be available in the list.
•
•
•
Front—this is the Simplex side of the page. The area(s) specified for the Front will only apply to
the Simplex side of the page when scanning in Duplex. Therefore, if you scan 4 double-sided
pages, the resulting image file(s) will have redacted areas on pages 1, 3, 5, and 7.
Back—this is the Duplex side of the page. The area(s) specified for the Back will only apply to the
Duplex side of the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the
resulting image file(s) will have redacted areas on pages 2, 4, 6, and 8.
Both—select this option if you want to specify an area that appears in the same place on both
sides of the page, such as a company logo, so you don’t have to specify the same area separately
for both the front and back.
Xerox® DocuMate® 3115
User’s Guide
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the
start position and redaction area size. The units of measurement is displayed on the lower-right corner
next to the Paper size field.
•
•
•
•
From left—input the upper-left corner start position measured from the left-side of the page.
From top—input the upper-left corner start position measured from the top of the page.
Width—input the width of the area to be removed.
Height—input the height of the area to be removed.
Color—this color field shows the selected fill color for the redacted area(s). When the software removes
the area you specify, it fills the area with the color you have selected here. To change the color, click the
artist palette button to open the Windows color palette. Select the color you want then click on OK. The
color you selected will now display in the Color field on the Redaction Settings tab.
Xerox® DocuMate® 3115
User’s Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Preview—this color field shows the actual color that will fill the redaction area in the final scanned
image. When scanning in color, the Preview field will match the Color field. When scanning in
Grayscale, the preview field will show the gray version of the color you selected, and that color will be in
the final scanned image. When scanning in Black&White, the preview field will display black or white
depending on the darkness of the color you selected, and the final image will have the redacted area(s)
be black or white.
Color
scanning
Grayscale
scanning
Black&White
scanning
Technical Note
The options on the Page Settings tab will affect the redaction options as described below:
•
On the Page Settings tab, click the name inches or mm to toggle between the two units of
measurement. When you click back on the Redaction Settings tab, the lower-right corner displays
the Paper size in the units of measurement you selected.
•
•
Make sure the page size selected on the Page Settings tab is correct for the documents you are
scanning, otherwise the redaction may not occur in the correct area.
If Color dropout is selected, redaction occurs after the color specified is removed from the image.
For example, if you selected Red as the color dropout, but then specify red for the redaction
region, the final image will have the redacted region filled with gray when scanning Grayscale, or
black or white when scanning in Black&White.
Click the name to
toggle between inches
and millimeters.
Xerox® DocuMate® 3115
User’s Guide
70
Download from Www.Somanuals.com. All Manuals Search And Download.
File Formats
The available file formats, in the Select format panel, are based on the selected destination for
scanning. For example, if scanning to the destination Transfer to Storage, all file formats are available
as the files are saved directly to a folder without opening any application. If the destination is an
application, such as Microsoft’s Paint, only the file types the application supports will be available in
the Select format panel.
Most of the format icons have a right-click menu to select file format specific options, or choose
additional formats that are not represented in the panel by default.
The format names in the Select format panel indicates the file type extension for the scanned file.
Text Formats; TEXT is
only one of several text
formats available.
Image Formats. The BMP, JPG, and PDF
image formats have right-click menu
options.
Create Single Image Files
The TIFF and PDF formats, as well as the text file formats, support multiple page documents in a single
file. If you are scanning as a TIFF or PDF format, or as one of the text formats, and want one file
created for each image scanned, select Create single image files. Note that this option is automatically
selected and disabled if you have selected a format that only supports single pages, such as BMP, PNG,
GIF, JPG, or JP2.
Xerox® DocuMate® 3115
User’s Guide
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Formats
Select an image file format for photos, artwork or other documents that you want to save as images.
BMP and TIFF are standard image file formats generally used if you want to do additional image
processing, such as photo touch-up or color correction.
Right-click on the BMP icon to access the GIF and PNG image formats. When you select either of these
formats, the format panel will change the BMP icon to the selected image format icon.
BMP—the *.bmp (bitmap) format is generally used when you want to do additional
image processing, such as photo touch-up or color correction, as very little image
compression is used when creating the file. When scanning in color or grayscale, BMP
scans result in the largest file size of the image formats.
GIF—the *.gif (graphics interchange format) format is generally used when putting
images on a website or server, as image compression can reduce the file size by
approximately 95% when compared to a BMP file of the same image. Company logos
and small pictures on a webpage are often GIF images. The GIF compression, and
limited color range, can result in the medium and large images looking grainy or
pixilated.
PNG—the *.png (portable network graphics) format is another common image format
for website graphics. Like GIF, the PNG compression greatly reduces the file size when
compared to a BMP file of the same image. However, the PNG compression is different
from GIF compression in that PNG images look better when scaled. Therefore, PNG is
often used in place of GIF for company logos with a lot of detail, clickable buttons,
medium sized pictures, and so on.
TIFF—the *.tif (tagged image file format) format is another image type that is often
used for photo editing. When scanning in color, it produces a file of similar quality and
size to a BMP file. However, when scanning in Black & White, the TIF compression
produces the smallest file size of all the image types without losing image quality. TIFF
also supports multi-page image files.
Xerox® DocuMate® 3115
User’s Guide
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Right-click on the JPG icon to access the JP2 image format. When you select JP2, the format panel will
change the JPG icon to the JP2 format icon.
JPG—the *.jpg (joint photographic experts group) format is a common image format
for transferring pictures electronically, such as posting to a website or sending via email,
as JPG image files are smaller than BMP and TIFF files. You can change the level of
compression for the picture file to have better quality or a smaller file size.
JP2—the *.jpg2 (joint photographic experts group 2000) format is the new JPEG
standard. This new JPG file type has improved compression for better image quality at
smaller file sizes. Please refer to the official JPEG website at www.jpeg.org for more
information about this file format, and a list of applications that can view and/or open
this file type.
To select a JPEG file size:
1. Select JPG as the page format.
2. Right-click on the JPG icon.
A menu opens.
3. Choose the file size/image quality option for your scanned images.
Minimize Size—smallest file size, lowest image quality.
Normal—medium file size, some loss of image quality.
Maximize Quality—largest file size, minimal loss of image quality.
Your selection pertains only to the button currently selected on the OneTouch Properties window.
Other buttons that have JPG selected as the file format are not affected, so you can set the JPG
file size/image quality independently for each button.
4. Click OK or Apply on the OneTouch Properties window.
Xerox® DocuMate® 3115
User’s Guide
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Right-click on the PDF format icon to change the image quality or select the option to make the
scanned PDF file PDF-A compliant.
PDF—the *.pdf (portable document format) image format is often used to create
images of text pages. The image compression of PDF files creates relatively small file
sizes when scanning multiple page files in color. While the TIFF image format also
supports multiple page files, when scanning in color the TIFF files are often too large to
be transferred electronically. The PDF file format is often used for posting multiple
page files to websites, sending via email, and permanent storage. As with the JPG file
format, you can change the PDF quality to reduce the file size or improve the image
quality.
®
®
Adobe Reader , or other PDF viewer software, must be installed on your computer for
you to to view PDF files.
Using PDF-A when scanning as PDF, means the files are compliant with the ISO-19005-
1 standard for permanent archival of electronic documents. More information about
this standard can be found at www.pdfa.org.
To select a PDF file size:
1. Select PDF as the page format.
2. Right-click on the PDF icon.
A menu opens.
3. Choose the file size/image quality option for your scanned images.
Minimize Size—smallest file size, lowest image quality.
Normal—medium file size, some loss of image quality.
Maximize Quality—largest file size, minimal loss of image quality.
Your selection pertains only to the button currently selected on the OneTouch Properties window.
Other buttons that have PDF selected as the file format are not affected, so you can set the PDF
file size/image quality independently for each button.
4. Click OK or Apply on the OneTouch Properties window.
Text Formats
Selecting the text format option also selects OCR processing as an automatic step for scanning.
Therefore, when you scan a document with the text format selected, the text portions of the document
are automatically converted to editable text.
Xerox® DocuMate® 3115
User’s Guide
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a text format for documents with text or numbers, such as a business letter, report, or
spreadsheet. The text format icon has several file formats available, depending on the Destination
Application you select.
Detailed information about these text file formats, and instructions for setting up the OCR options, are
To select a file type for the text format:
1. Select the Destination Application.
2. Right-click on the text format icon.
The menu options depend on the type of Destination Application you select.
Example menu for the Text format when
the selected application is Microsoft’s
Word and the OneTouch OmniPage
Module is installed.
Example menu for the Text format when
the selected application is Transfer to
Storage and the OneTouch OmniPage
Module is installed.
3. Choose the file type that you want for the text format.
4. Click OK or Apply on the OneTouch Properties window.
Xerox® DocuMate® 3115
User’s Guide
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure Before Scan
You can set up the scanner so that, when you press a button or click it on the Button Panel, a different
scanning interface opens before the scanning starts. You can then use the interface to change the
Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the
file type and to the same Destination Application already selected in the OneTouch Properties window
for that button.
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Click OK or Apply on the OneTouch Properties window.
To Scan Using Configure Before Scan
1. Click the button you set up to use Configure Before Scan.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White,
Resolution in DPI, and Page Size.
4. Click the Scan button on the TWAIN Interface.
5. The item is scanned. When finished, click the Done button and the image will be sent to the
Destination Application specified in the OneTouch Properties window.
Xerox® DocuMate® 3115
User’s Guide
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a Configure Before Scan
1. Click Cancel in the scanning progress window.
2. The following window will open asking if you want to cancel the entire job.
•
•
Yes—scanning stops and all pages scanned in this batch, up to this point, will be deleted. The
TWAIN interface will close and you can restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for your current scanning batch.
For instance, the Picture Type is Black & White but you want to scan your documents in color.
Choose Yes to delete any scanned pages, then start over but select the correct picture type
before scanning.
No—scanning stops, but all pages scanned in this batch, up to this point, are not deleted and
the TWAIN interface remains open. You can place a new page in the scanner, adjust the
TWAIN settings for it, then click the Scan button in the TWAIN interface to continue
scanning. At the end of the scanning batch, all pages from the first portion of the scan and
second will be sent to the Destination Application.
Choose this option if, for instance, you have been scanning a Black & White document but
you want to insert a color page into it. Instead of having to re-scan the entire batch, you can
stop the current scan, change the picture type from Black & White to Color, then restart the
scanning without losing the pages already scanned.
Xerox® DocuMate® 3115
User’s Guide
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Scanned Document(s)
Select the destination Open Scanned Document(s) to have the scanned document open automatically
when scanning is complete.
Supported file types—all file formats are available when scanning to the Open Scanned Document(s)
destination. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats on page 74 to see a list of text file formats that are available when OCR is
installed.
Destination type—the Open Scanned Document(s) destination is classified as a “Document
Management Link”. To make it available in the destination list, you must select Document management
on the Options tab in the OneTouch Properties window.
Technical Note
•
If there is no application installed for the file format you selected, the OneTouch Link Log Viewer
will open when scanning is finished showing the failure. You can double-click on the log failure to
open the detail view of the failed transfer.
For example, if you select PDF as the file type a PDF viewer application must be installed to open
the file.
Either install an application for that file type, or associate an application in the Windows Explorer
folders option, please refer to your Windows documentation for instructions on associating file
types.
•
When scanning to multiple destinations, the scanned file is still sent to the other selected
destination application(s) in OneTouch.
Xerox® DocuMate® 3115
User’s Guide
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer to Storage
With Transfer to Storage, you can scan documents and save them in a folder in one step.
Supported file types—since the files are saved directly to a folder on the computer or server, all file
formats in OneTouch are available. Note that text file formats are only available if an OCR module or
application is installed. Please refer to Text Formats on page 74 to see a list of text file formats that are
available when OCR is installed.
Destination type—the Transfer to Storage destination is classified as a “Storage Link”. To make it
available in the destination list, you must select Storage and CD-R/W on the Options tab in the
OneTouch Properties window.
Setting the Folder and Options from OneTouch
In the OneTouch Properties window, select Transfer to Storage as the Destination Application for
scanning.
•
Click the Properties button to open the OneTouch Link Properties for Transfer to Storage. From this
window, you can change the global default storage location and options.
On initial installation of OneTouch, all scan configurations use these settings. When you create
new configurations, the default settings will also match what you have selected here. If you
modify the storage options in an individual configuration, changing the options in this Link
Properties window will no longer update to the configurations you modified.
Xerox® DocuMate® 3115
User’s Guide
79
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click on the
Storage Options tab and use this window to set a configuration to scan to a different folder than
the one selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or modifying.
All other configurations will retain their settings for this destination.
Transfer to Storage OneTouch Link
Properties window
Scan Configuration Properties window -
Storage Options tab
Storage layout
•
All documents are in the root—the scanned documents are saved in the root of the folder specified
in the Storage location.
•
Documents are put into folders by month, week, or type—folders are created based on your selection
(month, week, or file type) and the scanned documents are saved in those folders. New folders are
created for each month and week so you can keep track of when you scanned the documents.
Storage location
This is the location on the computer or network where the file will be saved. Click on the Browse
•
button to change the location by browsing through your Windows folder list, or type a location
directly into the input field. You can select a local folder, or a folder on a server or mapped drive.
Open storage folder when scan is complete
•
Select this option to have the folder, specified in the Storage location, open when scanning is
complete and the image has been transferred to that location. If you have selected a month, week,
or type grouping option, the folder that opens will be the grouping option you selected.
Setting the Folder from Windows
When OneTouch was installed, a storage option was added to the right-click menu of your Windows
folders. This menu option allows you to set the Transfer to Storage folder location without opening
OneTouch first.
Xerox® DocuMate® 3115
User’s Guide
80
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Right-click on the folder you want set as the scan destination.
2. Hover the mouse cursor over the Set as scan destination option and the sub-menu will open to the
right. Click on the setting you want the Storage location to be updated with.
•
•
•
For all configurations—select this option to have the storage location, in all scan
configurations Storage Options tabs, updated to use this location. Note that the storage Link
Properties location will also update to use this location.
For new and default configurations—select this option to have the OneTouch Link Properties
storage location updated. Any scan configurations that you have not previously updated,
with custom storage locations, will also use this location.
For configuration used by a button—when you select this option, another sub-menu will open
to the right. The sub-menu will contain a list scanner buttons that are currently set to scan to
the Transfer to Storage destination. Select the button you want updated to use this location.
This option modifies only the scan configuration that is assigned to the button you select. If
you have multiple OneTouch 4.6 scanners installed, the first sub-menu will show a list of the
currently connected scanners for you to select which scanner to update.
Note that this option is disabled if there is no scanner plugged in and turned on.
Scanning to Multiple Folders
When archiving documents with Transfer to Storage option, you can scan the documents to different
folders. For example, one folder might be for “Business Receipts,” a second folder might be for “Personal
Receipts,” and a third folder might be for “Annual Receipts.”
To scan to multiple folders, you create multiple configurations, each with a different storage location
for the scanned documents. Scan one set of documents using the scan configuration with the
appropriate storage location for that set. Then switch to another scan configuration and scan the next
set of documents to store them in their folder.
Setting Up Multiple Folders for Transfer to Storage
1. Using Microsoft Windows, create the folders that you want to use for storing scanned items.
Xerox® DocuMate® 3115
User’s Guide
81
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Open the OneTouch Properties window.
3. Select Transfer to Storage as the Destination Application.
4. Click the New button.
The Scan Configuration Properties dialog box opens.
5. To help you remember which folder it is, give the new configuration a name that indicates the
folder name, such as “Business Receipts.”
6. Click the Scan Settings, Page Settings, and Advanced Settings tabs, and select the settings you want.
7. Click the Storage Options tab.
8. Click the Browse button.
Xerox® DocuMate® 3115
User’s Guide
82
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Select the folder you created for storing the scanned documents.
10. Click OK. The selected folder will now be set as the Storage location, such as “Business Receipts.”
11. Click OK. The new configuration is now listed as a Transfer to Storage configuration.
12. Repeat the process to create additional new configurations, such as one named “Personal
Receipts.”
Note: Make sure to designate separate folders as the Storage Locations for each new configuration.
Xerox® DocuMate® 3115
User’s Guide
83
Download from Www.Somanuals.com. All Manuals Search And Download.
13. You will now have multiple configurations set up for the Transfer to Storage destination, and each
configuration scans documents to separate folders.
The new configurations apply
to the Transfer to Storage
Destination Application.
14. Now select a scanner button for each new configuration. Click Apply to set that button for that
configuration.
Scan to multiple storage folders:
1. Insert the document you want to scan to storage.
2. Start scanning with the first button that you set to scan documents and transfer to storage.
3. When scanning is complete, insert the next set of documents in the scanner, then press the second
button you set to scan documents and transfer them to storage.
4. When scanning is finished, the documents are stored in the two separate folders.
Xerox® DocuMate® 3115
User’s Guide
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Burn to CD-ROM
If you have a CD burner attached to your computer, you can scan directly from your scanner onto a CD.
This feature is available only on computers running Windows version XP or later.
Supported file types—since the files are going to be burned to a CD, all file formats in OneTouch are
available. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats on page 74 to see a list of text file formats that are available when OCR is
installed.
Destination type—the Burn to CD-ROM destination is classified as a “Storage Link”. To make it available
in the destination list, you must select Storage and CD-R/W on the Options tab in the OneTouch
Properties window.
1. Open the OneTouch Properties window.
2. Select Burn to CD as the Destination Application.
3. Choose a File Format and a Scan Configuration.
4. Click OK.
5. Now start scanning using the scanning button you set to scan and burn to a CD.
The scanner will start scanning. When finished the file will be saved to the Windows temporary
location for CD files. An information bubble will appear in the Windows notification area telling
you that there are files waiting to be burned to CD.
Xerox® DocuMate® 3115
User’s Guide
85
Download from Www.Somanuals.com. All Manuals Search And Download.
6. When you are ready to burn the files to a CD, open the OneTouch Properties window, select Burn
to CD and then click the Properties button.
7. Make sure a blank CD is in the CD burner.
8. Click the Burn to CD button. The CD burner begins and your scanned documents are written to the
CD.
If other files are also waiting in this location, they will get written with the OneTouch files on the
CD.
Xerox® DocuMate® 3115
User’s Guide
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer or Fax
The availability of printers and/or faxes in the OneTouch destination list depends on whether or not
you have printers or faxes configured in Windows. Please refer to the Windows documentation, or your
printer or fax documentation, for setting up printers and faxes.
Supported file types—only the BMP file format is available, when scanning to a printer or fax, as only
uncompressed data can be send to these devices.
Destination type—printers and Faxes are classified as “Device Links”. To make them available in the
destination list, you must select Fax and Print on the Options tab in the OneTouch Properties window.
The Properties button will be disabled in OneTouch as there are no global properties for this type of
destination.
Select a printer or fax device, in the Select destination list, then open a Scan Configuration to modify
the settings for the device you selected.
Xerox® DocuMate® 3115
User’s Guide
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Click on the Device Settings tab and use the options on this tab to select settings for the device.
•
•
•
•
•
•
•
Fit to page, reduce image if necessary—if the scanned image is too big to be printed or faxed on a
single page, the image will automatically be reduced to fit the page.
Actual size, crop image if necessary—if the scanned image is too big to be printed or faxed on a
single page, the image will automatically be cropped around its edges to fit on the page.
Center image on page—the image will be printed in the center of the page instead of at the top
left corner.
Maintain aspect ratio—the aspect ratio is the length-to-width relationship of the image’s
dimensions. Select this option so the image’s relative proportions remain constant.
AutoRotate image for best fit—if the image is a Landscape format and the device is printing in the
Portrait mode, or vice versa, rotate the image to fit on the page.
Collate copies—if you are printing more than one page, collate the copies. Enter the number of
copies in the Copies box.
Advanced—click to see additional settings for the device. The dialog box that opens is specific to
the device. For example, if the device is your printer, the dialog box is your printer’s setup settings.
NOTE: When scanning to multiple printers and/or faxes, select the specific device, you want to
configure the Advanced features for, from the list before clicking on the Advanced... button.
Xerox® DocuMate® 3115
User’s Guide
88
Download from Www.Somanuals.com. All Manuals Search And Download.
PaperPort
In the OneTouch Properties window, select PaperPort as the Destination Application for scanning.
Supported file types—all image file formats are available when scanning to PaperPort. The sPDF and
nPDF text file formats are only available when the OmniPage software or OneTouch OmniPage module
Destination type—the PaperPort destination is classified as a “Document Management Link”. To make
it available in the destination list, you must select Document management on the Options tab in the
OneTouch Properties window.
•
Click the Properties button to open the OneTouch Link Properties for PaperPort. From this window,
you can change the default folder location and options.
On initial installation of OneTouch, all scan configurations send the scanned document to the
folder selected in this window. When you create new configurations, the default settings will also
match what you have selected here. If you modify the options in an individual configuration,
changing the options in this Link Properties window will no longer update to the configurations
you modified.
Xerox® DocuMate® 3115
User’s Guide
89
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click on the
PaperPort tab and use this window to set a configuration to scan to a different folder than the one
selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or modifying.
All other configurations will retain their settings for this destination.
PaperPort OneTouch Link Properties
window
Scan Configuration Properties window -
PaperPort tab
Select the destination folder for Scanned Documents
•
Select a folder to send the scanned document(s) to when scanning to the PaperPort destination.
The list of folders in this window are from the PaperPort Folder Manager. Use the PaperPort Folder
Manager to add or delete folders, add other drives and network locations to this list. You cannot
add new folders from the OneTouch PaperPort configuration windows.
Xerox® DocuMate® 3115
User’s Guide
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan to the current PaperPort folder
•
Select this option to have the scanned document(s) sent to the currently selected folder in the
PaperPort application.
The PaperPort software must be open, before scanning, for the scans to be sent to the selected
folder in the PaperPort folder pane. If PaperPort is not open, this option is ignored and the scanned
file is sent to the folder selected in either the OneTouch Link Properties or Scan Configuration
window for PaperPort.
Click the folder icon to open or close the folder
list in PaperPort.
These are the folders that are available in the
OneTouch PaperPort configuration windows.
Press F1 on your keyboard to open the
PaperPort help file for instructions on
managing this folder list.
The selected folder in this list is where the
scanned file will be saved when PaperPort is
open and the OneTouch option Scan to the
current PaperPort folder is selected.
Xerox® DocuMate® 3115
User’s Guide
91
Download from Www.Somanuals.com. All Manuals Search And Download.
SharePoint
The SharePoint destination link allows scans to be sent directly to a SharePoint site from OneTouch.
Please contact your SharePoint site administrator for the server information you need to configure this
link. Alternatively, have your site administrator or IT professional configure this link for you. Setup and
configuration of the SharePoint sites and user accounts are outside the scope of this document.
Supported file types—all image and text file formats, except HTML, are available when scanning to the
SharePoint site. Note that text file formats are only available if an OCR module or application is
installed. Please refer to Text Formats on page 74 to see a list of text file formats that are available
when OCR is installed.
Destination type—the SharePoint destination is classified as a “Storage Link”. To make it available in
the destination list, you must select Storage and CD-R/W on the Options tab in the OneTouch
Properties window.
All configuration of the SharePoint server is done using the SharePoint settings tab in the Scan
Configuration Properties window.
1. Select SharePoint as the destination application.
2. Open the Scan Configuration you want to modify for scanning to a SharePoint site, or create a
new Scan Configuration.
Select an existing configuration in which you have already specified your SharePoint site
information, and then click on the Copy button to create a new configuration using the settings of
the current configuration.
Xerox® DocuMate® 3115
User’s Guide
92
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the SharePoint tab and fill in the fields with the information for your SharePoint site.
•
•
Protocol—select which protocol you want to use to transfer the scan to the server.
SharePoint URL—input the full URL path of the SharePoint site without the http(s):// designation
and actual page. This path should include everything except the destination folder.
For example, if the web browser URL displays http://sharepoint.site.com/IT/common/shared
documents/default.aspx, then you would configure the SharePoint server path as follows:
•
•
•
Select HTTP as the protocol
The SharePoint URL would be sharepoint.site.com/IT/common
The Destination folder would be shared documents
•
User account—input the user account name that has privileges to save files to the specified
SharePoint site and Destination folder.
•
•
Password—input the password for the user account name you specified.
Use Windows Integrated Authentication—select this option to use the Windows current user’s login
name and password to access the SharePoint site.
•
•
Destination folder—this is the folder where the final scanned document(s) are transferred to when
scanning is complete.
Filename format—select a file naming format, for the scanned document, from the list. Select “Use
custom file naming” to use the file you set on the Options tab in the OneTouch Properties window.
Count—this field will enable when the selected Filename format contains {seq}. Input the number
you want the sequential count to start from.
Filename prefix—this field will enable when the selected Filename format contains {prefix}. Input
the name or value you want as the prefix in the final file name.
Because the destination configuration is done through the scan configuration, you can set each
configuration to scan to different SharePoint site, folder, filename format, using different user
credentials, and so on. This is the same process used as when scanning to different folders using the
Transfer to Storage destination, as described in detail starting on page 81.
Click on the Help button, in this configuration tab, to launch the SharePoint help file. The help file
contains detailed information about the settings in this window and technical implementation notes.
Xerox® DocuMate® 3115
User’s Guide
93
Download from Www.Somanuals.com. All Manuals Search And Download.
SharePoint Link Log Viewer
The OneTouch Link Log Viewer opens automatically when scanning is complete. Click on the menu
arrow next to View logs for and select SharePoint Link from the list to display the transfer history for the
SharePoint link only.
Double-click on any of the line items to open the selected log file in the Log File Detail View. If you
open a failed transfer, the log file may contain the information you need to determine why the transfer
failed. After you address the failure indicated in this log file, you can click the Retry button to resend the
document to the server.
Click on the Properties button to open the Log Viewer from the SharePoint OneTouch Link Properties
window. There are no global configuration properties for the SharePoint destination application, all
configuration is done using the Scan Configuration Properties window as described in the previous
section.
Xerox® DocuMate® 3115
User’s Guide
94
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP Transfer
The FTP Transfer destination link allows scans to be sent directly to an FTP server from OneTouch.
Please contact your server administrator for the server information you need to configure this link.
Alternatively, have your site administrator or IT professional configure this link for you. Setup and
configuration of the FTP server and user accounts are outside the scope of this document.
Supported file types—all image and text file formats, except HTML, are available when scanning to an
FTP server. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats on page 74 to see a list of text file formats that are available when OCR is
installed.
Destination type—the FTP Transfer destination is classified as a “Storage Link”. To make it available in
the destination list, you must select Storage and CD-R/W on the Options tab in the OneTouch
Properties window.
All configuration of the FTP server is done using the FTP Transfer tab in the Scan Configuration
Properties window.
1. Select FTP Transfer as the destination application.
2. Open the Scan Configuration you want to modify for scanning to an FTP server, or create a new
Scan Configuration.
Select an existing configuration in which you have already specified your FTP server information,
and then click on the Copy button to create a new configuration using the settings of the current
configuration.
Xerox® DocuMate® 3115
User’s Guide
95
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the FTP Transfer tab and fill in the fields with the information for you FTP server.
•
•
Protocol—select which protocol you want to use to transfer the scan to the server.
Host—input the internet or intranet path of the server where you want to send the scanned
documents. you do not need ftp:// at the beginning. For example, ftp.company.com
•
•
Port—input which port to use with the selected protocol. Changing the selected protocol will reset
this value to the appropriate default for the protocol.
User account—input the user account name that has privileges to save files to the specified host
destination folder.
•
•
Password—input the password for the user account name you specified.
Destination folder—input the folder path, on the remote FTP server, where you want the scanned
documents sent. This path would appear in your web browser after the host name. For example,
marketing/shared documents/data sheets.
Because the destination configuration is done through the scan configuration, you can set each
configuration to scan to a different FTP server, destination folder, and so on. This is the same process
used as when scanning to different folders using the Transfer to Storage destination, as described in
detail starting on page 81.
FTP Link Log Viewer
The OneTouch Link Log Viewer opens automatically when scanning is complete. Click on the menu
arrow next to View logs for and select FTP Link Agent from the list to display the transfer history for the
FTP link only.
Xerox® DocuMate® 3115
User’s Guide
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Double-click on any of the line items to open the selected log file in the Log File Detail View. If you
open a failed transfer, the log file may contain the information you need to determine why the transfer
failed. After you address the failure indicated in this log file, you can click the Retry button to resend the
document to the server.
Click on the Properties button to open the Log Viewer from the FTP OneTouch Link Properties window.
There are no global configuration properties for the FTP destination application, all configuration is
done using the Scan Configuration Properties window as described in the previous section.
Xerox® DocuMate® 3115
User’s Guide
97
Download from Www.Somanuals.com. All Manuals Search And Download.
SMTP
The SMTP destination link allows scans to be sent directly to an email address, through an SMTP server,
from OneTouch. Please contact your server administrator for the server information you need to
configure this link. Alternatively, have your site administrator or IT professional configure this link for
you. Configuration of the SMTP server settings and user accounts is outside the scope of this
document.
Supported file types—all image and text file formats, except HTML, are available when scanning to an
SMTP server. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats on page 74 to see a list of text file formats that are available when OCR is
installed.
Destination type—the SMTP destination is classified as a “Email Link”. To make it available in the
destination list, you must select Email on the Options tab in the OneTouch Properties window.
All configuration of the SMTP server is done using the SMTP Settings tab in the Scan Configuration
Properties window.
1. Select SMTP as the destination application.
2. Open the Scan Configuration you want to modify for scanning to an SMTP server, or create a new
Scan Configuration.
Select an existing configuration in which you have already specified your SMTP server
information, and then click on the Copy button to create a new configuration using the settings of
the current configuration.
Xerox® DocuMate® 3115
User’s Guide
98
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the SMTP Settings tab and fill in the fields with the information for you SMTP server.
•
•
Protocol—select which protocol you want to use to transfer the scan to the server.
Host—input the internet or intranet path of the server where you want to send the scanned
documents. For example, smtp.company.com
•
•
Port—input which port to use with the selected protocol. Changing the selected protocol will reset
this value to the appropriate default for the protocol.
User account—input the user account name that has privileges to send email messages through
the SMTP server.
•
•
Password—input the password for the user account name you specified.
Use Windows Integrated Authentication—Select this option to use the Windows current user’s login
name and password to send the message through the SMTP server.
•
Email to—input a valid recipient email address to receive the scanned document. If it is not a valid
address the transfer will fail.
•
•
Email from—input the email address you want to appear in the email message “from” field.
Limit (MB)—input the maximum message size limit set on the SMTP server. This number should be
lower than or match the SMTP server maximum. You cannot send messages that exceed the
maximum message size of the SMTP server.
Because the destination configuration is done through the scan configuration, you can set each
configuration to scan to a different SMTP server, send messages to different email addresses, using
different user credentials, and so on. This is the same process used as when scanning to different
folders using the Transfer to Storage destination, as described in detail starting on page 81.
Click on the Help button, in this configuration tab, to launch the SMTP help file. The help file contains
detailed information about the settings in this window and technical implementation notes.
Xerox® DocuMate® 3115
User’s Guide
99
Download from Www.Somanuals.com. All Manuals Search And Download.
SMTP Link Log Viewer
The OneTouch Link Log Viewer opens automatically when scanning is complete. Click on the menu
arrow next to View logs for and select SMTP Link Agent from the list to display the transfer history for
the SMTP link only.
Double-click on any of the line items to open the selected log file in the Log File Detail View. If you
open a failed transfer, the log file may contain the information you need to determine why the transfer
failed. After you address the failure indicated in this log file, you can click the Retry button to resend
the document to the server.
Click on the Properties button to open the Log Viewer from the SMTP OneTouch Link Properties
window. There are no global configuration properties for the SMTP destination application, all
configuration is done using the Scan Configuration Properties window as described in the previous
section.
Xerox® DocuMate® 3115
User’s Guide
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Email Applications
Scanning to an email application, such as Outlook or Windows Mail, attaches the scanned image to a
blank email message. You then fill in the recipient email address(es) and send the message. You need
to have configured an email application before you can scan to it using OneTouch. If you do not have
your email application set up prior to scanning, the default Windows email application will open and
ask you to configure your user information. Please contact your IT department, server administrator, or
other group that provided you the email information for setup instructions. Configuring an email
application and user account is outside the scope of this document.
Supported file types—all image and text file formats, except HTML, are available when scanning to an
email application. Note that text file formats are only available if an OCR module or application is
installed. Please refer to Text Formats on page 74 to see a list of text file formats that are available
when OCR is installed.
Destination types—the email destination is classified as an “Email Link”. To make it available in the
destination list, you must select Email on the Options tab in the OneTouch Properties window.
The email application in the OneTouch destination list is the default email program selected in the
Internet Options of Internet Explorer. Click on the email application that is in the list, then click on the
Properties button to launch the Email OneTouch Link Properties window to change the email
application.
Xerox® DocuMate® 3115
User’s Guide
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Email Properties
Use the Email Link Properties window to select a folder for storing a permanent copy of the scanned
image, setting the color document options, and changing the email application that is in the OneTouch
destination list.
•
•
Folder for storing attachments—click the Browse button to change the location using the Windows
file browser, or type a location directly in the field.
Internet options—if you need to change your email client, or any other internet options, click the
Internet Options button.
The Windows Internet Options Control Panel opens. Click the Programs tab and choose a new
email client from the program list. These are the standard Windows Internet Explorer options.
Please see your Windows documentation for more information about the Internet Explorer
options.
Color document handling—click in the Color document handling settings boxes for the options you
want.
•
Convert Bitmaps using Screen Resolution—use this option to ensure that an image will fit on the
computer’s screen.
•
Convert Bitmaps to JPEG—JPEG files can be compressed to produce smaller files sizes and,
therefore, shorter transmission times when you email the file or upload it to the internet.
If you changed the email application Internet Explorer, and it does not immediately appear in the
Select destination list, click the Refresh button to update the destination list in OneTouch.
Xerox® DocuMate® 3115
User’s Guide
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Editors
Scanning to a text editing application, such as Microsoft’s Notepad or WordPad, automatically
converts the text in the scanned image into editable text using Optical Character Recognition (OCR).
Supported file types—the text file formats and destination applications are only available if an OCR
module or application is installed. Please refer to Text Formats on page 74 to see a list of text file
formats that are available when OCR is installed. Additionally, the available file formats are application
specific, for example Microsoft’s WordPad can open *.txt and *.rtf files, so only those two file types will
be available when scanning to WordPad.
Note that when there is no OCR module or application installed, the format panel will not contain a
text icon and there will be no text editor applications in the Select destination list.
Destination type—this destination type is classified as a “Text Based Link”. To make it available in the
destination list, you must select Text editing applications on the Options tab in the OneTouch
Properties window. If the text editing application you are using does not appear in the Select
destination list, you can add the application using the Text Documents OneTouch Link Properties
window.
1. In the OneTouch Properties window select one of the default text editors such as WordPad.
2. Click on the Properties button to open the Text Document OneTouch Link Properties window. From
this window you can select what OneTouch should do when text is not detected or recognition
fails, and add other applications to OneTouch.
Note that if you recently installed an application, click the Refresh button to see if OneTouch will
automatically configure the link before you try adding it manually.
Xerox® DocuMate® 3115
User’s Guide
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Documents Properties
These properties apply to Microsoft Word, Microsoft Excel®, and any other text editing applications
indicated by their icons in the list.
•
•
Add application—click this button to open the Add Text Based Link dialogue so you can add other
text editing applications to OneTouch.
Delete application—select an application in the list then click this button to remove the application
from the OneTouch destination list. You can only delete an application that you have added, the
destinations that are linked when OneTouch is installed cannot be deleted.
General OCR settings—click in the OCR settings boxes for the options you want. The options will apply
to all the applications in the group.
•
Always send a file, even when no text was found—the scanned file is sent to the application even if
the image does not appear to contain text. This could occur if you scanned a photograph with a
scanner button set for text applications.
•
Show message if text recognition failed—a message will open on the screen if the OCR reader does
not detect text in the image.
Xerox® DocuMate® 3115
User’s Guide
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Text Editor Applications to OneTouch
1. To add another application to the list, click the Add application button. The Add Text Based Link
dialog box opens.
2. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, Steps 1 and 2 on the dialog box are
automatically filled in, and the application icon appears in Step 3.
3. Select the icon in Step 3 of the dialog box. That is the icon that will appear in the OneTouch
Destination List.
4. In Step 4 of the dialog box, select the file formats that the application will accept.
•
HTML Formatted file—select this option when you want to scan to your web browser for
posting HTML pages to a website. Even though word processing applications, such as
Notepad and Word can open *.htm files, you cannot scan as *.htm to word processing text
editors. Scanning as HTML creates a directory with the *.htm file and linked images for
website use. Word processing applications cannot accept a directory structure for image and
text transfer.
•
•
•
Rich Text Format—select this option if your application can open *.rtf files, which are plain
text documents that contain formatting. Microsoft’s WordPad application is a compatible
application for the *.rtf file formation.
Standard ASCII text file—select this option if you want to have plain text, without formatting,
sent to your text editing application. Most text editing applications will accept plain text
(*.txt) files.
Adobe PDF format—select this option if you are adding a PDF viewing or editing application
to the list. This PDF format is an image format only, it will not recognize the document using
OCR, and you will not be able to search or edit the text in the final file. The application you
are adding must be able to open *.pdf files.
Xerox® DocuMate® 3115
User’s Guide
105
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Adobe searchable PDF—this is the PDF image format with a hidden searchable text layer. You
will not be able to edit the text the file. The application you are adding must be able to open
*.pdf files.
The options you select at Step 4 determine the page format icons in the OneTouch Properties
window for that group of applications. Refer to the documentation you received with the
application to see which text formats the application accepts.
5. When you are done making changes in this window, click the Add button to accept the changes
and close the window.
6. Click OK on the Link Properties window.
7. Click Refresh on the OneTouch Properties window and the new application should now be
available.
Creating an HTML Web Page from Your Scanned Documents
1. Open the OneTouch Properties window.
2. Select your web browser as the Destination Application and choose HTML as the Format.
Choose
HTML
3. Choose a Scan Configuration that has the settings for how you want any images, on the pages
you are scanning, to be displayed. For example, choose a color or grayscale scan configuration if
your documents contain images that you want posted to your website with the HTML text.
4. Click OK.
5. Start scanning using the button you selected for scanning with the HTML format.
When scanning is finished, the document is first converted to editable text using the OCR process,
then converted into an HTML format. Any images detected by the OCR engine are isolated and
linked as *.gif files.
6. Microsoft Internet Explorer, or other web browser you scanned to, then opens showing your
converted page. The application’s URL field shows the location where OneTouch saved the HTML
files for you to locate and post to your website.
Xerox® DocuMate® 3115
User’s Guide
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Image Client
If you want to specify an application to use for scanning at the start of the process, you can use event
forwarding.
Supported file formats—you cannot select a file format when scanning to the Still Image Client as the
destination application is not selected until after you start scanning.
Destination type—the Still Image Client destination is classified as an “Event Forward Link”. To make it
available in the destination list, you must select STI event forwarding on the Options tab in the
OneTouch Properties Window.
Please note that if you have turned on the option to scan to multiple destinations, the Still Image
Client destination cannot be selected. Please click on the Options tab and deselect Enable scanning to
multiple destinations to proceed with scanning to this destination.
1. Open the OneTouch Properties window, and select Still Image Client as the Destination
Application.
2. Choose a Scan Configuration and click OK.
3. Start scanning using the button you selected for event forwarding.
Xerox® DocuMate® 3115
User’s Guide
107
Download from Www.Somanuals.com. All Manuals Search And Download.
4. A dialog box opens for you to select the application to use for scanning. Select the application you
want in the box and click OK.
Now the application you selected opens and you can continue scanning using that application’s
interface.
Technical Note
If the scanner scans and sends an image to an application without prompting you to choose an
application to run, the control panel options for your scanner’s events are automatically set to run a
specific program when an event is initiated. Follow these steps to change the events setting for your
scanner.
1. Open the Windows Control Panel.
2. Open the Scanners and Cameras group.
When the Control Panel is in Classic View, the Scanners and Cameras group will be in the list.
When the Control Panel is in Category View (Windows XP), or Home View (Windows Vista, 7 and
8), the Scanners and Cameras group will be located under either of the following main groups:
•
•
Windows XP—Printers and Other Hardware
Windows Vista, 7 and 8—Hardware and Sound
3. Open the scanner properties window.
•
Windows XP—click on the scanner icon and then click on the View device properties link on
the left side of the window.
•
Windows Vista, 7 and 8—click on the scanner icon and then click on the Properties button.
4. Click on the Events tab.
5. Select the option Prompt for which program to run to be prompted when scanning to Still Image
Client. Alternatively, select Start this program then choose an application from the list to have that
application start each time you scan to Still Image Client.
6. Click on OK when you are done making changes to this window.
7. Now when you scan with Event Forwarding you will either be prompted to choose an application,
or the default application you selected will open.
Xerox® DocuMate® 3115
User’s Guide
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Editors
Image editors include Microsoft Paint and other drawing and graphics applications.
Supported file formats—the available file formats are based on the selected destination application. For
example, you can scan to Microsoft’s Paint application as a BMP, GIF, PNG, or JPG, but not as TIFF or
information on which image formats OneTouch supports.
Destination type—this destination type is classified as a “Simple Image Link”. To make it available in
the destination list, you must select Image editors (i.e. Paint) on the Options tab in the OneTouch
Properties window. If the image editing application you are using does not appear in the Select
destination list, you can add the application using the Image Documents OneTouch Link Properties
window.
1. In the OneTouch Properties window select one of the default image editors such as Microsoft
Paint.
2. Click on the Properties button to open the Image Documents OneTouch Link Properties window.
From this window you can add an application and set additional document handling options.
Note that if you recently installed an application, click the Refresh button to see if OneTouch will
automatically configure the link before you try adding it manually.
Xerox® DocuMate® 3115
User’s Guide
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Documents Properties
These properties apply to Microsoft Paint and other image processing applications.
•
•
Add application—click this button to open the Add Simple Image Link dialogue so you can add
other image editing applications to OneTouch.
Delete application—select an application in the list then click this button to remove the application
from the OneTouch destination list. You can only delete an application that you have added, the
destinations that are linked when OneTouch is installed cannot be deleted.
Color document handling—click in the Color document handling settings boxes for the options you
want. These options will apply to all the applications in the group.
•
Convert Bitmaps using Screen Resolution—use this option to ensure that an image will fit on the
computer’s screen. When a computer screen is set to a lower resolution, bitmap images with a
higher resolution may be too big to fit on the screen. Converting the bitmap image to match the
screen resolution ensures that the image fits on the screen.
•
Convert Bitmaps to JPEG—JPEG files can be compressed to produce smaller file sizes and,
therefore, shorter transmission times. Use this option to provide that compression capability to
image files.
Xerox® DocuMate® 3115
User’s Guide
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Image Editor Applications to OneTouch
1. To add another application to the list, click the Add application button. The Add Simple Image Link
dialog box opens.
2. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, Steps 1 and 2 on the dialog box are
automatically filled in, and the application icon appears in Step 3.
3. Select the icon in Step 3 of the dialog box. That is the icon that will appear in the OneTouch
Destination List.
4. In Step 4 of the dialog box, select the file formats that the application will accept.
•
Windows Bitmap File—select this option if you want to scan to your image application as a
BMP file. This format creates the largest file size as the final scanned image has not been
compressed.
•
•
•
Tagged Information File—select this option if your application supports TIF image files. The
TIF file format supports multiple pages in a single file.
JPEG Compressed File—this is a compressed image format that is often used when sharing
photographs and scanned images electronically as the file size is smaller than a BMP.
Compugraphics File—select this option if your application supports GIF images. This file
format is often used for icons and small images on a web page.
The options you select at Step 4 determine the page format icons in the OneTouch Properties
window for that group of applications. Refer to the documentation you received with the
application to see which text formats the application accepts.
5. When you are done making changes in this window, click the Add button to accept the changes
and close the window.
6. Click OK on the Link Properties window.
7. Click Refresh on the OneTouch Properties window and the new application should now be
available.
Xerox® DocuMate® 3115
User’s Guide
111
Download from Www.Somanuals.com. All Manuals Search And Download.
PDF Applications
PDF destinations are applications that can open and/or edit the Adobe PDF file format.
Supported file types—applications in the PDF destination group support the *.pdf file format. When the
OmniPage module or software is installed, OneTouch includes an option to scan as sPDF or nPDF.
Selecting either of these two formats still creates a *.pdf file, but the “s” and “n” letters indicate that
OCR will process the image before sending the file to the PDF application.
•
sPDF—this format creates a *.pdf file that contains the original image of the scanned page, with a
hidden text layer that allows you to search for text in the file.
•
nPDF—this format creates a *.pdf file that can be edited in a PDF application. Any pictures in the
scanned image are isolated from the text, the text on the page is recognized and turned into
editable text, and the pictures are placed back into the document in the same flow as the original
document.
Destination type—this destination type is classified as “PDF Link”. To make it available in the
destination list, you must select PDF applications on the Options tab in the OneTouch Properties
window.
If the PDF application you are using does not appear in the Select destination list, you can add the
application using the Text Documents OneTouch Link Properties window.
1. Click on the Options tab in the OneTouch Properties window.
2. Make sure PDF applications and Text editing applications are selected then click back on the
button tab.
Please note that any PDF application you add manually to OneTouch will be classified as a “Text
Based Link.” These applications will only show in the destination list when Text editing
applications are enabled.
Xerox® DocuMate® 3115
User’s Guide
112
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on one of the default text editors such as WordPad.
4. Click on the Properties button.
5. To add another application to the list, click the Add application button. The Add Text Based Link
dialog box opens.
6. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, Steps 1 and 2 on the dialog box are
automatically filled in, and the application icon appears in Step 3.
7. Select the icon in Step 3 of the dialog box. That is the icon that will appear in the OneTouch
Destination List.
Xerox® DocuMate® 3115
User’s Guide
113
Download from Www.Somanuals.com. All Manuals Search And Download.
8. In Step 4 of the dialog box, select Adobe PDF format and Adobe searchable PDF.
Adobe PDF format—select this option if you are adding a PDF viewing or editing application to the
list. This PDF format is an image format only, it will not recognize the document using OCR, and
you will not be able to search or edit the text in the final file. The application you are adding must
be able to open *.pdf files.
Adobe searchable PDF—this is the PDF image format with a hidden searchable text layer. You will
not be able to edit the text the file. The application you are adding must be able to open *.pdf
files.
The options you select at Step 4 determine the page format icons in the OneTouch Properties
window for that group of applications. Refer to the documentation you received with the
application to see which text formats the application accepts.
9. When you are done making changes in this window, click the Add button to accept the changes
and close the window.
10. Click OK on the Link Properties window.
11. Click Refresh on the OneTouch Properties window and the new application should now be
available.
Xerox® DocuMate® 3115
User’s Guide
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Send to Application
The Send to Application link allows you to select any application on your computer as the scan
destination.
Supported file types—all file formats in OneTouch are available when scanning to this destination. After
you configure the link, as described below, make sure you select a file format that the application can
open. Please refer to Text Formats on page 74 to see a list of text file formats that are available when
OCR is installed.
Destination type—this destination type is classified as “Document Management Link”. To make it
available in the destination list, you must select Document Management on the Options tab in the
OneTouch Properties window.
You must configure this destination before attempting to scan to it the first time. If you scan without
configuring the link first, the OneTouch log viewer will open and show that sending the image to the
Send to Application link failed.
•
•
Click the Properties button to open the OneTouch Link Properties for the Send to Application link.
From this window, you can configure the default application for this link.
After configuring the link properties, all of the default scan configurations will immediately update
to send to the application you specify in this window. When you create new configurations, the
default settings will also match what you have selected here. If you modify the options in an
individual configuration, changing the options in this Link Properties window will no longer update
to the configurations you modified.
Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click on the
Send to Application tab and use this window to set a configuration to scan to a different
application than the one selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or modifying.
All other configurations will retain their settings for this destination.
Xerox® DocuMate® 3115
User’s Guide
115
Download from Www.Somanuals.com. All Manuals Search And Download.
To configure a destination application for the Send to Application link:
Send to Application OneTouch Link
Properties window
Send to Application Scan Configuration
Properties window
1. Click Browse to open the Windows file browser and navigate to the location of the application’s
executable (*.exe) file.
In most cases, the application’s directory is located in the programs directory on the C:\ drive.
Because you can select any executable file, make sure you select an application that can receive
image or text files.
2. Select the application’s *.exe file then click on Open.
The application’s *.exe file path will now show in the Application path field.
3. Click on OK to close the window.
For basic scanning, you do not need to adjust any of the other settings in this window. The default
settings will work with most applications. The advanced settings are described below.
4. Select a file format and scan configuration in the OneTouch Properties window.
If you select a text file format, the scanned image is converted into editable text before being sent
to your selected application.
5. Click on OK to close OneTouch.
6. Put the document(s) in the scanner and start scanning with the button you set to use the Send to
Application destination.
7. The scanner starts scanning and, when finished, sends the scanned file to the application you
selected.
Technical note
•
After configuring this link, you may need to click Refresh in the OneTouch Properties window to
show the correct application icon in the Select destination list.
Xerox® DocuMate® 3115
User’s Guide
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure advanced features—select this option to change the default settings for this link. Only
advanced users and application developers should modify these settings.
Send to Application OneTouch Link
Properties window
Send to Application Scan Configuration
Properties window
•
Launch application for every image—when this option is selected, the application will open one
time for each image scanned. You should deselect this option only if the application you are
scanning to will accept multiple page files.
For example, Microsoft’s Paint application can only accept 1 image at a time, so when scanning
multiple images, Paint would open each time an image is transferred when this option is selected.
On the other hand, Microsoft’s WordPad will open a multiple page file, so when scanning multiple
images WordPad would need to launch only one time when this option is not selected. If you scan
to WordPad and this option is still selected, then WordPad will open 1 time for each image
transferred.
•
Command line arguments—input the options that are to be used when the application is launched.
These values are application specific and you should only input values that were provided to you
by the application developer. Command line arguments are not required for you to use this link,
the field can be left blank and you can change the other settings in this section as needed.
•
•
Append scan filename(s) to arguments—this option adds the name of every image file to the end of
the list of arguments specified above. This is the default selection as most applications do not
require, and may not work with, a job file containing the image names.
Append job file to arguments—this option adds the name of a job file to the end of the list of
arguments specified above. This unique file is created at scan time and contains a list of every
image in the scan job. Only select this option if you are sure that the application you are scanning
to can use the job file to accept image transfer.
Xerox® DocuMate® 3115
User’s Guide
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning to Multiple Destinations
Scanning to multiple destinations works the same as when scanning to a single destination, OneTouch
simply distributes the final scan to several destinations. This option is enabled separately for each
OneTouch button.
1. Open the OneTouch Properties window and click on the Options tab.
2. Select Enable scanning to multiple destinations, then click back on the configuration tab.
3. Click each destination where you want to send the scanned image in the Selected destinations (#)
list. Click again to deselect a destination.
As you click on each destination, the Selected destinations number will count so you know how
many applications are selected to receive the image.
Xerox® DocuMate® 3115
User’s Guide
118
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If any of the destinations you select have global configuration properties, the Properties button at
the bottom of the Selected destinations list will be enabled for you to configure the destination
options. Click on the Properties button to open the OneTouch Link Properties window to configure
the destinations.
Each destination that has global properties will be represented by its configuration tab in the
OneTouch Link Properties window. Please refer to the destination instructions, as described in the
previous section(s), for configuring destination specific options.
Click on OK when you are done making changes in this window.
5. Select the file format you want for the scanned image in the Select format panel.
You can only scan as one file format at a time, so all selected destinations must have a common
file type. As you select destinations, destinations that do not have a file type in common with the
one you selected, will automatically disable.
For example, if you scan to a printer and to email, only the BMP file format will be available as
printers can only receive an uncompressed image format. All other image formats and all text
formats will be disabled until you deselect the printer.
Xerox® DocuMate® 3115
User’s Guide
119
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the scan configuration you want to use for scanning in the Select configuration list.
Click on the Edit button to open the Scan Configuration Properties window to configure any
destination specific scanning options.
Each destination that has per-scan configuration properties will be represented by its
configuration tab in the OneTouch Scan Configuration Properties window. Please refer to the
destination instructions, as described in the previous section(s), for configuring destination
specific options.
Click on OK when you are done making changes in this window.
7. Click on OK on the OneTouch Properties window.
8. Load the document(s) in the scanner and start scanning with the button you set to scan to
multiple destinations.
The scanner starts scanning and when finished, the image is sent to each destination you selected in
the OneTouch Properties window.
Technical Note
•
The Still Image Client destination cannot be used with multiple destination scanning. This
destination will be disabled when the Enable scanning to multiple destinations is selected.
Xerox® DocuMate® 3115
User’s Guide
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning with Job Separation
Use job separation to have OneTouch create a new file each time a separator is detected when
scanning a multiple page batch. For example, if you want to scan financial statements from several
different banks, you can place a stack of statements in the scanner and OneTouch will separate each
statement into a different file based on your selected job separator.
1. Open the OneTouch Properties window.
2. Select the Destination Application, File Format, and Scan Configuration applicable to your
scanning batch.
Make sure the option Create single image files is not selected. If this option is selected, the job
separation features on the Options tab will be disabled.
3. Click on the Options tab in the OneTouch Properties window.
4. Click on the down arrow next to the Select Button list to select the button you want to modify.
Note that the options in this window are specific to each OneTouch button.
Xerox® DocuMate® 3115
User’s Guide
121
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click on the option Use job separator when scanning multiple pages.
6. Select one of the two job separation options:
When a blank page is detected—a new file will be created after a blank page is fed through the
scanner. The blank page is discarded from the scanned image and the new file starts with the next
page in the document stack. Place a blank page, in the document you are scanning, at each place
where you want a new file created when scanning is complete.
When you are scanning in Duplex mode, both sides of the page must be blank for this job
separation option to work.
•
Sensitivity—you can adjust the sensitivity level of the blank page detection. For instance,
depending on the paper weight, color mode, or image processing options selected, you might
get varying results. Changing the sensitivity level allows you to fine-tune the accuracy of the
blank page detection.
When the number of images reaches—input the maximum number of images you want in the
scanned file. The scanner will create a new file each time that number is reached.
When you are scanning in Duplex mode, the number of images captured is double the number of
pages in the scanner. For example, if you are scanning 12 double-sided pages it is counted as 24
images. If you want the stack split in half, the number of images reached would be 12.
7. When you are done making changes, click on OK to save the changes and close the window.
8. Place your documents in the scanner and start scanning.
When scanning is finished, each file will be sent to the destination location or application you have
selected on the button tab.
Technical Note
•
When Instant delivery is also selected on the Options tab, each file will be sent as it is created.
Xerox® DocuMate® 3115
User’s Guide
122
Download from Www.Somanuals.com. All Manuals Search And Download.
The options on the Page Settings tab, in the Scan Configuration Properties window will affect the job
separation options as described below:
Skip blank originals
•
The Sensitivity you set for this feature is the one that is used when scanning. The sensitivity level
you set in the Options tab will be ignored.
•
When you are scanning in Simplex mode and the selected job separator is When a blank page is
detected, the job separation occurs first and a new file will be created each time a blank page is
detected. If you want a single file created with the blank page discarded, deselect the job
separation feature on the Options tab.
Note that when scanning Duplex, both sides of the page must be blank for the job separation to
occur. If both sides of a scanned page are blank, the job separation occurs first and a new file will
be created each time a blank page is detected. If you want a single file created with the blank
page discarded, deselect the job separation feature on the Options tab or remove the blank page
from your scanning batch.
•
If you select When the number of images reaches, and input a number in the control box, any blank
pages will be discarded first, and then the number of images scanned will be counted. For
example, if you scan 12 pages and 3 are blank, the total number of images counted for the job
separation will be 9 not 12.
Xerox® DocuMate® 3115
User’s Guide
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning with Optical Character Recognition
(OCR)
Optical Character Recognition (OCR) converts text and numbers on a scanned page into editable text
and numbers. You can then work with the text and numbers to edit, spell check, change font or type
size, sort, calculate, and so forth.
NOTE: Xerox recommends that all OCR processing use the original factory settings for
OCR scanning that came with your scanner. When scanning with other settings, use
at least 300 dpi for the resolution. If the original documents are of poor quality or
have a small type font, 400 dpi can be used as the maximum resolution.
The OneTouch OmniPage Module must be installed on your computer in order to use the OCR options
with the OneTouch software and your Xerox scanner. The OneTouch OmniPage Module was
automatically installed when you installed your driver from the installation disc.
NOTE: Some of the illustrations in this section may not look exactly as they appear on
your computer’s screen. The differences are minor and do not affect the steps to use
the new features.
To scan with OCR:
1. Open the OneTouch Properties window.
2. Select a text editing program in the Select Destination list, then select a text file format in the
Select format panel.
For example, if you want to edit your document in Microsoft’s WordPad, select that application
then choose a file format such as TEXT or RTF.
3. Click on OK to save the changes and close the OneTouch Properties window.
Xerox® DocuMate® 3115
User’s Guide
124
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press or click the OneTouch button you set to scan with OCR.
Your scanned pages appear in the Destination Application with the text ready for editing and
other text processing.
Text Formats
You select the text format option by clicking on the text icon on the OneTouch Properties window.
This is the text format icon.
This example of the text
format icon is sPDF.
Selecting the text format option also selects OCR processing as an automatic step for scanning.
Therefore, when you scan a document with the text format selected, the text portions of the document
are automatically converted to editable text.
As you select Destination Applications that are text applications, the text format icon changes to
match the file type of the application. In some cases, the Destination Application supports several file
types, and you can right-click on the icon to choose the particular file type for that application.
The specific file format is the file name extension on the text format icon.
The specific text format; this
example is for Rich Text Format
(.rtf).
To select a file type for the text format:
1. Select the Destination Application.
Xerox® DocuMate® 3115
User’s Guide
125
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Right-click on the text format icon.
Example menu for the text format when
the Destination Application is Microsoft
Word.
Example menu for the text format when
the Destination Application is a Storage
location.
3. Choose the file type that you want for the text format.
Your selection of a file type pertains only to the Destination Application currently selected on the
OneTouch Properties window. Other Destination Applications that have a text option selected as
the Page Format are not affected.
Simple Text—the .txt file format. Text with no formatting; used by the standard
Microsoft Notepad application.
Rich Text Format—the .rtf file format. Text that retains formatting when
converted. Available with Microsoft WordPad and Word.
Word Document—the .doc file format used by Microsoft Word.
Comma Delimited—the .csv file format; used for database or spreadsheet data
with fields, when the document is converted into editable text the fields are
maintained.
Excel Spreadsheet—the .xls file format used by Microsoft Excel.
HTML Document—the .htm file format used to create web pages.
Searchable PDF—the .pdf file format used by Adobe Acrobat. This format
converts scanned text into PDF with an invisible text layer for searching.
Xerox® DocuMate® 3115
User’s Guide
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal PDF—the.pdf file format used by Adobe Acrobat. This format converts
scanned text into a PDF with the text ready for editing in a PDF editing program.
Additional options are available on the menu for the sPDF and nPDF text formats. The three image
quality settings are:
•
•
•
Minimize Size—smallest file size, lowest image quality.
Normal—medium file size, some loss of image quality.
Maximize Quality—largest file size, no loss of image quality.
NOTE: Documents scanned with nPDF and sPDF automatically include OCR
processing. If the processing does not recognize a large number of the text characters
in the document, change the image quality setting and re-scan the document. For
example, change from Minimize Size to Normal to see if the text recognition improves.
The Use MRC option is a special processing procedure for documents scanned with the PDF format.
•
Use MRC—MRC stands for Mixed Raster Content. MRC is an advanced technique for optimizing
the image quality of scanned documents. Without MRC, the scanned image is produced using a
single process to capture and display the image on the computer screen, even if the document
contains both text and graphics. With MRC, the image is produced using separate processes for
text, graphics, and other elements on the document page. The result is clearer graphics and
sharper text characters. Scans with Use MRC selected may take slightly longer to complete the
processing. Select Use MRC for documents with harder-to-read text or lower-quality graphics to get
the best possible scan output image. The Use MRC option is available for sPDF and PDF.
Xerox® DocuMate® 3115
User’s Guide
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting OneTouch OmniPage OCR Options
The software you installed for your scanner includes a set of advanced OCR options integrated with
OneTouch.
NOTE: the OCR options apply globally to all the OneTouch Destination Applications
that perform OCR. For example, if you select the OCR options for Adobe Acrobat, they
also apply to WordPad.
To select OCR options available from OneTouch:
1. Open the OneTouch Properties window.
2. Select a Destination Application that has one of the text format file types as the page format,
such as Microsoft Word or WordPad.
3. Right-click on the page format icon to see the menu.
4. Choose OCR Options from the menu.
The OCR Properties window opens with the OCR tab selected.
Xerox® DocuMate® 3115
User’s Guide
128
Download from Www.Somanuals.com. All Manuals Search And Download.
The OCR Tab
The options shown on the OCR tab window are for spellchecking scanned text, replacing missing or
unrecognized characters, and setting the speed and quality levels of the OCR processing.
1. Choose the options you want from the OCR window.
•
Languages in Document—click on the language(s) in list that correspond to the languages in
the documents to be scanned. You can click on multiple languages. These are the languages
that will be recognized during the OCR process. For faster and more reliable language
recognition, select only the languages in the documents.
The languages are in alphabetical order. Type the first letter of a language’s name to jump to
its section in the list.
•
Use languages and dictionaries to improve accuracy—select this option to automatically check
the validity of the recognized words. An OCR engine looks at each letter or symbol on the
page individually, then “guesses” what the letter or symbol is based on the shape. Therefore,
the OCR engine may have more than one guess for a particular letter or symbol, a “best
guess”, a “second-best guess”, and so on. This option tells the OCR engine to look through the
dictionary to validate its best guess for the letters in that word; if its best guess is not in the
dictionary, it checks for the second-best guess, and so on.
For example, if the word “house” appears in the original document but the OCR engine is
75% sure that the “o” is actually an “a”, the finished document would have the word “hause”.
Turning this option on tells the OCR engine to look at the other letters in the word, check to
see which version of the word is in the dictionary, and output the correct word “house” in the
final document.
The OCR engine does not automatically correct misspelled words that were present in the
original document.
When dictionaries are selected, the terms in those dictionaries are used to check the spelling.
If this is option is not selected, User Dictionaries and Professional Dictionaries cannot be
selected.
Xerox® DocuMate® 3115
User’s Guide
129
Download from Www.Somanuals.com. All Manuals Search And Download.
•
User Dictionary—a user dictionary is your personal dictionary with words that you want the
OCR engine to reference for better accuracy when converting the document into editable
text. For example, if you scan documents with highly technical terms or acronyms not found
in typical dictionaries, you can add them to your personal dictionary. You can also add names
that you expect to be in the documents too. This way, as the OCR process recognizes each
letter or symbol, there is a higher chance that the technical term or name will be correctly
spelled in the final document. You can create multiple user dictionaries. See the section
Click the menu arrow and select a user dictionary from the list.
If you select [none] as the user dictionary, the text will be validated using the terms in the
dictionaries for the selected languages, as well as any professional dictionaries if they are
selected.
The label [current] is next to the currently-select user dictionary.
•
•
Professional Dictionaries—these are legal and medical dictionaries containing highly
specialized words and phrases. The options are: Dutch Legal, Dutch Medical, English
Financial, English Legal, English Medical, French Legal, French Medical, German Legal, and
German Medical. Select the appropriate dictionary for the OCR engine to use to validate the
scanned text.
Reject Character—this is the character that the OCR process inserts for an unrecognizable text
character. For example, if the OCR process cannot recognize the J in REJECT, and ~ is the
reject character, the word would appear as RE~ECT in your document. The ~ is the default
reject character.
Type the character you want to use in the Reject Character box. Try to choose a character that
will not appear in your documents.
•
•
Missing Character—this is the character that the OCR process inserts for a missing text
character. A missing text character is one that the OCR process recognizes, but cannot
represent because that character is not available for the selected language. For example, if
the document contains the text symbol “Ç” but the OCR process cannot represent that
character, then every place “Ç” appears, the OCR process substitutes the missing character
symbol. The caret (^) is the default symbol for the missing character.
Type the character you want to use in the Missing Character box. Try to choose a character
that will not appear in your documents.
Recognition Quality—drag the slider to the left or right to set the degree of accuracy for the
OCR process. The higher the accuracy, the longer the OCR process requires to complete. For
clean, highly-legible documents, you can set the recognition quality to a lower level to
produce results more quickly.
2. Click OK or Apply.
These options will now apply to the OCR processing when you select any text format as the page
format.
Creating Your Own Dictionaries
You can create multiple dictionaries for your personal use. For example, you might have different
dictionaries for separate work projects, especially if each project uses different acronyms and
terminology.
Xerox® DocuMate® 3115
User’s Guide
130
Download from Www.Somanuals.com. All Manuals Search And Download.
To create a personal dictionary:
1. Open any word processing program, such as Microsoft Word, WordPad, or Notepad.
2. Create a new document in the word processing program.
3. Type each word you want in your new dictionary, followed by a carriage return. Make sure to spell
the words correctly as they will be used for spellchecking.
Here is an example of what the text file might look like:
•
•
•
•
•
•
•
•
Xerox
OneTouch
OmniPage
wysiwyg
jpeg
bmp
sPDF
nPDF
The file does not have to include every word you want in the dictionary. You will be able to edit the
list later. In fact, the file does not have to contain any text at all, and you could add the words
using the editing options. However, if the list of words is long, it’s usually faster to type them in the
word processing program. Note also that the words do not need to be alphabetized.
4. Save the document in the .txt format and give the file the name that you want for the dictionary.
For example, give it the name USERDIC1.
5. Now open the OCR Options window.
6. On the OCR Options window, click the button next to the menu arrow.
7. The User Dictionary Files window opens and shows the available dictionaries.
MyDictionary is an example of a user dictionary.
Xerox® DocuMate® 3115
User’s Guide
131
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click Add New.
The Add New User Dictionary window opens.
9. Click the drop-down arrow for Files of type and choose Text Files (.txt).
10. Select the file you just created for your user dictionary and click Open.
In the example above, the file is named USERDIC1.
11. The text file now appears on the list of user dictionaries that you can use for spellchecking.
12. Select a dictionary and click Set As Current to set it as the current dictionary for spellchecking. The
label [current] is added to the name.
If you don’t want to use any user dictionaries for spellchecking, click [none] at the top of the list.
To remove a dictionary from the list, select it and click Remove. This only removes the dictionary
from the list. It does not affect the original text file you created with the list of words.
Editing User Dictionaries
Once a dictionary has been added to the list of user dictionaries, its list of words can be edited.
Xerox® DocuMate® 3115
User’s Guide
132
Download from Www.Somanuals.com. All Manuals Search And Download.
To edit a user dictionary:
1. On the Add New window, select the dictionary to edit and click Edit.
The Edit User Dictionary window opens. It lists the words currently in the dictionary. The following
example shows the words OmniPage and OneTouch are in the user dictionary named
MyDictionary.
2. To add a new word to the list, type it in the box for User Word and click Add. If the word includes
any spaces before or after it, those spaces are removed and the word is added to the list.
To delete a word from the list, select it and click Delete.
If a word in the list is misspelled, delete it, then re-type the word correctly in the User Word box and
click Add.
3. To import a list of words from another text file, click Import.
The Import Contents of User Dictionary window opens.
4. Select the file that has the words you want to add to your user dictionary.
Importing will add the entire list of words in a file to the user dictionary.
5. Click Import. The file’s words will be added to your user dictionary list.
Xerox® DocuMate® 3115
User’s Guide
133
Download from Www.Somanuals.com. All Manuals Search And Download.
6. To export a user dictionary so it can be used by another program, select the dictionary on the User
Dictionary Files list and click Export.
The Export User Dictionary window opens.
7. Select the dictionary file to export and click Save.
The file is exported as a formatted dictionary with the .ud filename extension so it can be opened
by other programs.
The Format Tab
The options on the Format tab window are for setting the input and output formats for the scanned
documents.
Xerox® DocuMate® 3115
User’s Guide
134
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Click the Format tab and choose the options you want for both the input and output formats.
Input Format Options
•
Automatic—choose this option to let the OCR process determine the format of the pages.
Typically you select this option when the document has different or unknown types of
layouts, pages with multiple columns and a table, or pages containing more than one table.
The OCR process will then determine if text is in columns, an item is a graphic or text, and
tables are present.
•
Single column no table—choose this option if the document contains only one column of text
and no tables. Business letters are normally in this form. You can also use this option for
documents with words or numbers in columns if you do not want them placed in a table or
decolumnized or treated as separate columns.
•
•
•
Multiple columns, no table—choose this option if some document pages contain text in
columns and you want it kept in separate columns, similar to the original layout. If table-like
data is encountered, it is placed in columns, not in a gridded table.
Single column with table—choose this option if your document contains only one column of
text and a table. The table will be placed in a grid in the Destination Application you have
selected. You can later specify whether to export it in a grid or as tab-separated text columns.
Spreadsheet—choose this option if the entire document consists of a table that you want to
export to a spreadsheet program, or have treated as a table. No flowing text or graphics will
be detected.
Output Format Options
•
Automatic—the document will be formatted as close to its original as possible. The OneTouch
software will adjust its settings to the most appropriate for the document being scanned in
order to match your selected output format. The output quality will be maximized and the
processing time minimized.
•
No formatting—the document will be plain text, one column, left-aligned in a single font and
font size. You can then export the plain text to nearly all file types and target applications.
Xerox® DocuMate® 3115
User’s Guide
135
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Retain fonts and paragraphs—this output format retains the font and paragraph styling,
including graphics and tables without columnized text, but does not retain layout formatting.
If the document is being scanned as an Excel spreadsheet, each detected table or
spreadsheet becomes a separate worksheet, while other content is placed on the last
worksheet.
•
•
•
Flowing page—this format preserves the original layout of the pages, including columns. This
is done wherever possible with column and indent settings, but not with text boxes or frames.
Text will then flow from one column to the other, which does not happen when text boxes are
present.
True page—this output format uses absolute positioning on the page to keep the original
layout of the pages, including columns. This is done with text, picture and table boxes and
frames. True Page is the only choice for documents scanned with the PDF format. It is not
available for the TXT, RTF, CSV, or XLS formats.
Spreadsheet—this output format produces results in a tabular form with each page becoming
a separate worksheet. The worksheets can then be opened in a spreadsheet application. The
Spreadsheet output option is only available for documents scanned with the XLS format.
2. Click OK or Apply.
These options will now apply to the OCR processing when you select any text format as the page
format.
Xerox® DocuMate® 3115
User’s Guide
136
Download from Www.Somanuals.com. All Manuals Search And Download.
OneTouch with Visioneer Acuity Technology
The OneTouch software you received with your Xerox scanner now includes the Visioneer Acuity
technology. This application has a set of features for improving and enhancing the quality of scanned
documents, especially documents that would usually produce poorer quality images. Scan
configurations with Acuity options work with OneTouch scan settings to produce the best quality
images.
This section explains how to use the Visioneer Acuity features when choosing new scan settings for
your scanner.
The Acuity options appear on the Scan Configuration Properties window that you use to create a new
scan configuration for your scanner.
Click the Acuity Settings tab to see the new options
available for your scanner.
The Acuity Settings
You select the Visioneer Acuity settings when creating or editing a scan configuration on the OneTouch
Properties window.
Xerox® DocuMate® 3115
User’s Guide
137
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Open the OneTouch Properties window.
2. Click the New button to create a new configuration, or select one of your custom configurations
you created earlier and click the Edit button.
3. Click the Acuity Settings tab to see the new Acuity settings.
4. Choose the Visioneer Acuity options for the scan configuration.
5. Click the drop-down arrow to choose the type of Acuity settings to use for the new scan
configuration. The options are:
•
•
Do not use Acuity image processing—scanning will not use the Acuity processing.
Default settings—automatically selects the options your scanner can use with any scan mode
(Black&White, Grayscale, and Color).
6. Select the options for scanning.
•
AutoCrop to original—Select this option to let the software automatically determine the size
of the item being scanned.
•
Straighten image—Select this option to have the software automatically determine if a page
is skewed, then straighten its image. If the page is scanned at too great an angle, the image
may not straighten correctly. In that case, re-scan the page.
Xerox® DocuMate® 3115
User’s Guide
138
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Auto detect color—Determines if a document contains color or not and produces the
appropriate scanned image. Typically, Auto Color Detect is used when you have a stack of
pages to scan, some color and others not. Instead of you having to change the scan settings
from Color to Black&White and back again, the scanner can choose the correct settings
automatically.
Skip blank originals—Recognizes when a page is blank and removes its image. For instance, if
you are scanning a stack of pages that includes a blank page, its image will not be included
with the other images from the stack.
•
•
Rotate image—Select an option in this list to have the final image rotated when scanning is
complete.
Perform edge cleanup—Select this option to have the software remove any thin lines that may
be around the edges in the scanned image. Edge Cleanup only applies if AutoCrop and
AutoDeskew are selected so the software can determine where the edges are located.
Therefore, selecting Edge Cleanup will also select AutoCrop and AutoDeskew. This option is
only available when scanning in Black&White.
•
•
Despeckle—Speckles are small spots on an image that the scanner interpreted as a valid part
of the document. The Despeckle option identifies these spots and removes them. This option
is only available when scanning in Black&White.
Color dropout—color dropout is the ability of your scanner to automatically remove a color
from a scanned image. For example, if you are scanning a letter with a red watermark, you
can choose to filter out the red so the scanned letter just shows the text and not the red
watermark. Color dropout applies to Black & White or Grayscale scanning modes.
•
Bit depth reduction—Click the drop down menu and select an option from the list. The Bit
depth reduction options are only available when scanning in black and white.
Error diffusion, Bayer, and Halftone patterns are the intentional application of noise
(dithering) in the image to help alleviate banding when scanning in binary (black and white)
mode. For example, if you scan a color photo in black and white, the image file will have large
blocks of black and white and the image barely recognizable. Dithering the image creates a
black and white image that is recognizable.
Dynamic threshold attempts to evaluate the scanned page and automatically adjust the
brightness and contrast levels to produce the best quality image when scanning in black and
white.
Xerox® DocuMate® 3115
User’s Guide
139
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click OK or Apply to add the Acuity options to your scan configuration.
The Acuity icon on the top of the OneTouch
Panel and on the scan configuration remind
you that the scan will use the Acuity
settings.
The summary of the scan settings also
indicates Acuity settings.
Xerox® DocuMate® 3115
User’s Guide
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Properties
1. Right-click on the OneTouch icon and choose Show Hardware from the pop-up menu.
2. The Hardware Properties dialog box opens and shows information about your Xerox scanner.
3. Click the Properties button.
Xerox® DocuMate® 3115
User’s Guide
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing the Scanner Interface
Every scanning application will access the scanner using a different method. Below is a brief list of
common applications and how to initiate a scan from within that application, including some of the
applications which may have been provided with your scanner. Please refer to the application’s user
guide for instructions on using the application and accessing the scanner.
•
Visioneer OneTouch: Open the Visioneer OneTouch properties window and under the configuration
list select Configure Before Scan. Click on OK to save the changes and close Visioneer OneTouch.
The next time you scan using that button, the scanner interface will open for you to set the scan
options and start scanning.
•
Nuance PaperPort: On the toolbar click on the scanner icon to open the scan pane on the left side
of the PaperPort desktop. Click on the Select... button to open the scanner selection window. Select
either the TWAIN or WIA driver for your scanner model and then click OK. If you get a message
that the scanner is not in the PaperPort database, follow the instruction on-screen to run the
Scanner Setup Wizard.
•
Nuance OmniPage: Go to Tools, then select Options.... Click on the Scanner tab, then click on Setup.
Follow the instructions on-screen to setup OmniPage to work with the scanner.
Choosing TWAIN or WIA
A note about your scanner and the TWAIN standard:
TWAIN is a widely recognized standard that computers use to receive images from scanners and
digital cameras. The TWAIN scanning interface can be accessed from any TWAIN scanning application
you have installed on the computer. The driver interface described herein is the TWAIN driver that has
been developed for your scanner. However, there are some applications that have their own TWAIN
interface. If you are scanning from a software application, and see the interface shown in this section,
you can use these instructions to scan with the TWAIN interface. If you do not see this TWAIN
interface, please refer to your scanning application’s user guide for instructions.
A note about your scanner and Microsoft WIA (Windows Image Acquisition):
The WIA platform has been developed to enable image transfer from devices using standard Windows
applications, such as Paint or Windows Fax and Scan, without the need to install additional scanning
software. Microsoft has developed its own interface for using the scanner with the Windows
applications, as well as any other WIA compatible applications you may have installed. However, when
using a WIA 2.0 compatible application, the default behavior will display the TWAIN interface as
described in this document. You can change the driver behavior to show the Windows interface instead
of the custom interface described herein. Please refer to Driver Settings for the Hardware Properties
Please refer to your Windows documentation for WIA scanning instructions if you do not see the
interface described below, or if you have any questions regarding Windows scanning applications.
Xerox® DocuMate® 3115
User’s Guide
144
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
Some features described herein may not be available for the current scanner. Please disregard any
information about features that you do not see in the interface for your scanner.
NOTE: Visioneer Acuity must be installed for the image processing options, described in this document,
to be available in the interface for your scanner. Only features that are appropriate for your scanner will
be enabled after Visioneer Acuity is installed. Visioneer Acuity is automatically installed when you
install the scanner driver from the installation disc. If you downloaded the scanner driver from our
website, make sure you also download and install Visioneer Acuity.
1. Load the document(s) in the scanner.
2. Adjust the settings in the interface for the item you are scanning.
3. Click on the Scan button.
4. When scanning is complete, click Done to close the interface.
5. The scanned images are now in the scanning application.
Locked Scanning Interface
If you see this locked version of the scanner’s interface you will be able to select a predefined scanning
profile from the Presets list, and then click the Scan button to start scanning.
Xerox® DocuMate® 3115
User’s Guide
145
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also click on the Preview button to open the preview dialogue for you to scan a preview image
and set custom scan regions.
NOTE: You can lock or unlock the scanner’s interface from the driver configuration options for your
scanner. The instructions for changing this setting are in the Driver Settings section of this guide. If you
are unable to change this setting the option may have been set by your system administrator. Please
contact your system administrator for more information.
Xerox® DocuMate® 3115
User’s Guide
146
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Preview Window
Clicking the Preview button will display the preview window for the scanner interface. Use the preview
option if you want to scan and display a sample image that reflects the current settings in the main
interface. After the preview is displayed, you can then adjust the settings in the main interface until
you are happy with how the sample image looks. The preview window is also where you can define
regions.
To use the preview window:
1. Select the initial scan settings you want to use for the preview image and scanning.
If you want to modify the settings for a particular preset, make sure you select that preset before
continuing.
2. Click the Preview button to open the preview window.
If there is a page in the scanner, the scanner will scan and display a sample image in the preview
window. If you do not have a page in the scanner when you click Preview, the preview window will
open and display an empty scan area. You will need to place a page in the scanner and click Get
preview to scan and display a sample image.
3. The preview window displays the scan area and the current scan region. This scan region reflects
the paper size currently selected in the main interface. When you pass the mouse cursor over the
scan region it will highlight for you to move or resize it. If you move, resize, or add scan regions the
instructions on creating, resizing and deleting regions.
Click the zoom in or zoom out button to zoom in or out on the preview image in 15% steps. Click
the up or down arrows for the Zoom level box to zoom in or out on the preview image in 5% steps.
Click the zoom to fit button to fit the entire preview area within the preview window.
Xerox® DocuMate® 3115
User’s Guide
147
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click Show main UI to bring the main scanner interface in front of the preview window for you to
adjust the scan settings.
There are some settings in the main interface, such as brightness and contrast, which will
immediately update the preview image after you adjust the setting. Other settings, such as
changing from color scanning to black and white scanning, will not automatically update the
sample image.
If you select any of the document image adjustment options, such as an option to automatically
crop, straighten or rotate an image, it will not show in the sample image preview. The preview
window displays an unaltered view of the item size and position in the scanner. Any document
image adjustment options will be used while scanning and saving images.
5. After you adjust the scan settings, click Refresh preview to get a new sample image that reflects
the most current settings in the main interface.
6. When you are happy with the sample image, you can click Scan in the preview window or in the
main interface to scan and save the image with the current scan settings.
Xerox® DocuMate® 3115
User’s Guide
148
Download from Www.Somanuals.com. All Manuals Search And Download.
When you scan, any settings you adjusted are automatically saved to the Last used settings preset.
These settings are not retained in a preset until you click Save in the main interface to save the settings
to the current preset, or save them to a new preset using the Save as dialogue. If you select a different
preset from the Presets list before scanning, the changes you made will be discarded.
Scan Regions
You can use the preview window to create custom scan regions for the scanner to use for scanning. For
example, if you want to scan only a specific area of the image, you can move and resize a scan region
to focus only on the area you want to scan. The final image will be only the size of the region you set.
Important: do not change the page size for the scanned image after you create custom regions. When
you have set a custom region in the preview window, the page size field will display “user defined”
indicating you have specified one or more custom regions for scanning. Changing the page size after
you create a custom region discards the custom regions and sets a single scan region to the size you
selected in the page size list.
Creating custom scan regions:
1. Select the preset you want to use for scanning.
2. In the main interface click Preview to open the preview window.
If no previous custom scan regions have been created for the preset you selected, the preview
window will have a single scan region that is the page size for the current preset. This region will be
labeled number 1 and be displayed as an outline in the preview area.
3. Place an item in the scanner and then click Get preview.
4. The scanner scans and displays a sample image.
Xerox® DocuMate® 3115
User’s Guide
149
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Move or resize region 1 until the sample image area you want is within the scan region.
Resize the region by clicking on one edge of the region outline and dragging the mouse. Move the
region by clicking in the region then dragging the mouse. Please refer to Move, Resize, or Delete
Regions for detailed instructions.
6. Create additional scan regions as needed by clicking anywhere in the sample image, hold your
mouse button down, and then drag your mouse to create a scan region. Release the mouse button
when the area you want is within the rectangle.
If you want to create a region that overlaps another region, hold the Ctrl (control) key on the
keyboard while you click and drag the mouse to create the region. You can release the Ctrl key
after you start creating the overlapping region. You only need to hold down the Ctrl key if the
starting point of the overlapping region is over another region. If you do not hold down the Ctrl
key, when you click on the area that has already been set as a region you will move the existing
region.
7. Click Close when you are done creating scan regions.
Xerox® DocuMate® 3115
User’s Guide
150
Download from Www.Somanuals.com. All Manuals Search And Download.
8. In the main scanner interface click Save to save the regions to the current preset, or save them to a
new preset using the Save as dialogue.
The Summary area in the main interface will indicate when custom regions have been defined in
the preview window. Click on View or modify custom regions in the summary area to display the
preview window.
9. Click Scan in the main interface to scan using the custom regions.
10. When scanning is finished, one image is created for each region set in the preview window.
The number of scan regions you can create is limited by the scanner model and installed modules. For
instance, most scanners have only one region. When you select a paper size in the Page size list, or
input the dimensions in the custom page size fields, you are setting a scan region.
When Visioneer Acuity is installed, you can create multiple scan regions for each image scanned. The
maximum number of scan regions you can create when Visioneer Acuity is installed may vary between
scanner models. When creating scan regions and you reach the maximum number of allowable scan
regions, you will not be able to continue creating scan regions until you remove a region you have
already created.
Xerox® DocuMate® 3115
User’s Guide
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Move, Resize, or Delete Regions
Moving regions – to move a region, place your mouse cursor over the region you want to move. The
region will highlight indicating that it is the active region under the mouse cursor. Click on the region
and drag the mouse to move the region.
Resizing regions – to resize a region, place your mouse cursor over the edge of the region outline. The
cursor will change to a dual directional arrow. Click on the line and drag the mouse to resize the region.
If you click on the top or bottom edge, you can only resize the region up or down. If you click on the left
or right edge, you can only resize the region left or right. Click on a corner edge and then drag the
mouse to resize the region in all directions.
Note that you can only resize the scan regions to be within the scanner’s minimum and maximum
supported paper sizes. Please refer to the scanner specification table, in the maintenance section of the
user guide, for the supported paper sizes for your scanner.
Xerox® DocuMate® 3115
User’s Guide
152
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting regions – to delete a region, place your mouse cursor over the region you want to delete. The
region will highlight indicating it is the active region under the mouse cursor. Right-click on the region
and select the delete option from the menu.
Move, Resize, or Delete a Blocked Region
If there is a region you cannot move or resize because another region is in the way, you can temporarily
move that region behind the other regions. Right-click on the region that is in the way and select
Temporarily send this region to the back to move that region behind the one that you want to move or
resize. This is a temporary change in the region ordering and cannot be undone. That region will
automatically move back into its position when you click to move or resize a region.
Reordering Regions
If you have created multiple scan regions, you can reorder the region priority from the right-click menu
for the regions. The priority determines which region gets processed first while scanning. For example,
region 1 will be processed first and appear in the scanning application as the first image. Right-click on
the region and select an option from the menu.
Xerox® DocuMate® 3115
User’s Guide
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Make this the first region – select this option to set the region number to 1. This option is not available if
the region you right-clicked on is already at position 1. After selecting this option, all other regions will
have their number update automatically as appropriate.
Make this region a lower number – select this option to move the region number up one in the
processing order. This option is not available if the region you right-clicked on is already at position 1.
After selecting this option, all other regions will have their number update automatically as
appropriate.
Make this region a higher number – select this option to move the region number down one in the
processing order. This option is not available if the region you right-clicked on is already the last region
in the processing order. After selecting this option, all other regions will have their number update
automatically as appropriate.
Make this the last region – select this option to set the region number to the last number in the
processing order. This option is not available if the region you right-clicked on is already at the last
position in the processing order. After selecting this option, all other regions will have their number
update automatically as appropriate.
Clear All Regions
Right-click anywhere in the preview window where there are no regions, and then click on Clear all
regions to remove all of the regions in the preview area. This will leave only the region labeled as
number 1. There must always be at least one region for scanning.
Xerox® DocuMate® 3115
User’s Guide
154
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Source Configuration
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either
not appropriate for the current scanner, the software needed to enable the feature is not installed, or
the feature is dependent on another setting in the scanner's interface. Hover the mouse cursor over a
grayed out feature to see information about why the feature is unavailable.
Select Basic or Advanced from the list to show the basic or advanced document source configuration
options as described below.
Basic Options
•
•
Auto source—when scanning in basic mode, this option is always enabled and cannot be changed.
Duplex—select this option to scan both sides of the item in the scanner.
Click the drop down menu to select the color mode you want to use.
•
•
Color scans the document in color, creating a full color copy of an original document or
photograph. Color scans have the largest file size.
Gray scans the document using varying shades of gray to reproduce the document. The grayscale
scan mode is often used when scanning documents or graphics where the original color does not
need to be retained, but the graphics need to be legible. Grayscale scanning preserves the graphic
quality while keeping the file size less than that of a full color scan.
•
Black and White scans the document in bitonal where everything on the page is either black or
white. This setting is often used when scanning typed or written documents. When there are not a
lot of graphics, or if the graphics are not needed, this setting is ideal for archiving documents to a
server or on a disc, send through email, or posting to a web page, as the file size is smaller than the
other scanning modes.
Advanced Options
•
Auto source—select this option to have the scanner automatically determine where the paper is in
the scanner. This option is only available if your scanner has more than one paper source option,
such an ADF with a front feed tray scanner, or an ADF with a flatbed combination scanner. When
this option is not selected, you can select which source you want to use in the scan mode list.
Xerox® DocuMate® 3115
User’s Guide
155
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Multi-stream—select this option to have the scanner create an image of each item scanned in
each color mode selected in the source list.
Duplex—select this option to scan both sides of the item in the scanner. Note that if you deselect
the Back side options in the source configuration list, this option will automatically deselect.
Click the drop down menu to select the scanning options you want to use.
The available color modes are:
•
•
Automatic determines the color of the document as it is being scanned.
Color scans the document in color, creating a full color copy of an original document or
photograph. Color scans have the largest file size.
•
Gray scans the document using varying shades of gray to reproduce the document. The grayscale
scan mode is often used when scanning documents or graphics where the original color does not
need to be retained, but the graphics need to be legible. Grayscale scanning preserves the graphic
quality while keeping the file size less than that of a full color scan.
•
Black and White scans the document in bitonal where everything on the page is either black or
white. This setting is often used when scanning typed or written documents. When there are not a
lot of graphics, or if the graphics are not needed, this setting is ideal for archiving documents to a
server or on a disc, send through email, or posting to a web page, as the file size is smaller than the
other scanning modes.
Sources identical
If the scanner has multiple paper source options, select this option to have the settings you choose in
the interface apply to all paper sources in the scanner. For instance, if you select color scanning when
scanning from the input tray, then the flatbed or front feed tray scans will also be in color.
(Example: Sources are identical)
(Example: Sources are different)
Xerox® DocuMate® 3115
User’s Guide
156
Download from Www.Somanuals.com. All Manuals Search And Download.
While the option to enable or disable Sources identical is in the source configuration list, the color mode
is not the only option that can be individually configured for each source. Other options in the scanner
interface, such as resolution, brightness, contrast, etc... will also be individually set for each source. After
you deselect Sources identical, any changes you make in the scanner interface will only be applied to
the option that appears at the top of the list (for example, “Input tray (Front side) Black and White”).
To set the scanner options individually for each source:
1. Click the drop down menu and deselect Sources identical.
2. Select the color mode you want for the first source.
3. Click the top of the menu to collapse the list. Select the options in the scanner interface that you
want to use for the first source.
4. When you are done making changes for the first source, click in the source configuration list and
select the color mode for the second source.
That source selection will now be displayed in the top of the source configuration list.
5. Click the top of the menu to collapse the list. Select the options in the scanner interface that you
want to use for the second source.
Tip: Save the changes to a Preset when you are done selecting options for each source. Please refer to
Presets for more information.
Sides identical
If the scanner supports two-sided (duplex) scanning, you can individually set the color mode and other
options in the scanner interface for each side of the page. This option is always selected and grayed
out if the scanner hardware does not support the feature.
(Example: Sides are identical)
(Example: Sides are different)
While the option to enable or disable Sides identical is in the source configuration list, the color mode is
not the only option that can be individually configured for each side. Other options in the scanner
interface, such as resolution, brightness, contrast, etc... will also be individually set for each source. After
you deselect Sides identical, any changes you make in the scanner interface will only be applied to the
option that appears at the top of the list (for example, “Input tray (Front side) Color”).
To set the scanner options individually for each side:
1. Click the drop down menu and deselect Sides identical.
2. Select the color mode you want for the first side.
Xerox® DocuMate® 3115
User’s Guide
157
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click the top of the menu to collapse the list. Select the options in the scanner interface that you
want to use for the first side.
4. When you are done making changes for the first side, click in the source configuration list and
select the color mode for the second side.
That side selection will now be displayed in the top of the source configuration list (for example,
“Input tray (Back side) Gray”).
5. Click the top of the menu to collapse the list. Select the options in the scanner interface that you
want to use for the second side.
Tip: Save the changes to a Preset when you are done selecting options for each source. Please refer to
Presets for more information.
Xerox® DocuMate® 3115
User’s Guide
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Presets
A preset contains all features in the scanner interface, including color mode, resolution, paper size, and
so on. You can create, import, export, and delete presets. After presets have been added to the
interface, click the drop down menu and select an option from the list.
•
If you select the Last used settings preset, then adjust the settings in the scanner interface, when
you scan those changes will immediately save to the preset.
•
•
Click the Save button if you want to save changes to the Last used settings preset without scanning.
Click the Cancel button to close the scanner interface without saving any changes.
To save a new preset:
1. Adjust the options in the scanner interface as needed.
2. Click on the right arrow and select Save as... from the list.
3. After clicking on the save option, a dialogue opens for you to type in a name. Type in the name
you want then click OK.
To modify an existing preset:
1. Select the preset you want to modify in the preset list.
2. Adjust the options in the scanner interface as needed.
3. Click Save.
To rename a preset:
1. Select the preset you want to rename in the preset list.
2. Click the right pointing arrow button and select Rename....
Xerox® DocuMate® 3115
User’s Guide
160
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Type an new name for the preset in the name field and then click on OK in the dialogue.
To delete a preset:
1. Click the drop menu under Presets and select the preset you want to delete.
2. Click the right pointing arrow button and select Delete.
3. Click Yes when prompted to confirm that you want to delete the currently selected preset.
Exporting Presets
1. Click on the right pointing arrow and select Export... from the list.
Xerox® DocuMate® 3115
User’s Guide
161
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click on the browse button
next to the Destination folder field to open a file browsing window.
3. Browse to a location and select the folder where you want the preset file to be saved. Click on
Choose.
Make sure to choose a location where you will be able to easily find the file.
4. Select the preset you want to export in the dialogue for exporting a preset. If you want to export
multiple presets, click on each preset name. You may need to hold down the Ctrl (Control) key on
your keyboard, while clicking on each preset name, to select multiple presets.
Xerox® DocuMate® 3115
User’s Guide
162
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click on Export.
If you selected multiple presets to be exported, a file will be created for each preset you selected.
NOTE: the software will look for duplicate preset names. If you see a notification indicating that a
preset with the same name already exists, select one of the options on-screen to continue.
•
•
Overwrite—select this option to replace the current preset with the one you selected from the list.
Keep both—select this option to keep both presets. The preset you selected will have a counting
number added to the end of the preset name; for example, “Custom preset name (2)”. The original
preset name will remain unchanged.
•
Skip—select this option to skip the preset with the duplicate name.
Select the option Do this for all conflicts to have the action you select in this dialogue be used for all
conflicts found.
Importing a Preset
If you have previously exported presets, or another user has given you their presets files, select the
import option to add those presets to your current list.
Note that if you import presets that were created when using a scanner that does not have the same
hardware features as your current scanner, the settings for the presets you import will automatically be
updated to reflect the supported settings for the current scanner. For example, if you are using a
flatbed scanner and you import a preset that was created using an ADF scanner, all settings that are
specific to ADF scanning will be modified.
1. Click on the right pointing arrow next to the presets list and select Import....
Xerox® DocuMate® 3115
User’s Guide
163
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Browse to the location where the preset file is saved. If you want to import multiple presets, click
on each preset name. You may need to hold down the Ctrl (Control) key on your keyboard, while
clicking on each preset name, to select multiple presets.
3. Click on Open.
4. The preset will now be in the list of presets available in the scanner's interface.
NOTE: the software will look for duplicate preset names. If you see a notification indicating that a
preset with the same name already exists, select one of the options on-screen to continue.
•
•
Overwrite—select this option to replace the current preset with the one you selected from the list.
Keep both—select this option to keep both presets. The preset you selected will have a counting
number added to the end of the preset name; for example, “Custom preset name (2)”. The original
preset name will remain unchanged.
•
Skip—select this option to skip the preset with the duplicate name.
Select the option Do this for all conflicts to have the action you select in this dialogue be used for all
conflicts found.
Xerox® DocuMate® 3115
User’s Guide
164
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Settings
•
Main panel—this panel contains the most commonly used scan settings. When the Basic source
configuration mode is selected, this is the only panel available. Change to the Advanced source
configuration mode to enable the other panels which are also described in this section.
The Document settings section when the Basic document source configuration mode is selected.
The Document settings section when the Advanced document source configuration mode is selected.
•
Advanced panel—this panel contains advanced document handling options. If you select an
option in this panel that also appears on the Main panel, when you return to the Main panel that
option will be selected.
Xerox® DocuMate® 3115
User’s Guide
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabled Options in this Section
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either
not appropriate for the current scanner, the software needed to enable the feature is not installed, or
the feature is dependent on another setting in the scanner's interface. Hover the mouse cursor over a
grayed out feature to see information about why the feature is unavailable.
When you are using a scanner that has multiple sources, such as an ADF with Flatbed combination
scanner, some options may be disabled based on the current source displayed in the source list. For
example when the flatbed source is selected, the manual feed option will be disabled.
If an option is unavailable, check to see which source is displayed at the top of the source list when in
the Advanced interface view.
When Flatbed is displayed here, only the
options that can be used for the flatbed will
be available in the scanner interface.
Click on one of the color modes under the
source you want to configure. That source will
now be displayed at the top of the list, and
the options for that source will be available in
the scanner interface.
Note that even when Sources identical is selected, any options that are only available for a specific
source will be discarded if the scanner scans from the source that does not have those options.
Xerox® DocuMate® 3115
User’s Guide
166
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Panel Options
Some of the options in this panel may have advanced adjustment options on a different panel in this
section. When the Advanced configuration mode is selected, an icon will appear next to those features
which have adjustment options on another tab. Click on one of the icons to go to the area of the
interface where the adjustment options are located.
Click on a link below to go to the appropriate page in this section for instructions on adjusting the
option that is displayed on the Main tab.
•
•
•
Automatic cropping options
Skip blank originals
Cleanup edges
Resolution
The resolution determines the amount of detail you can see in the scanned image. Resolution is the
clarity of the image measured in dots-per-inch (dpi).
Move the slider left or right to change the resolution for the scanned image. The higher the resolution,
the clearer the image. However, high resolution scans also produce larger file sizes. The available range
displayed in the slider area are within the minimum and maximum range supported by your scanner.
The resolution slider will always display the correct range for the current scanner.
Choosing resolution values
Typically, when making copies of black and white documents, 100–150 dpi will create an image of
similar quality to the original. When making copies of color documents or photographs, 150–200 dpi
will create an image of similar quality to the original.
Higher resolution settings are generally used for creating an image that can be enlarged without losing
image quality, but take longer to scan.
Some resolution settings for typically scanned items are:
•
•
Text document letters, forms, or other typed black and white documents – 100 dpi to 150 dpi
Text document letters or forms with hand printed text – 150 dpi
Xerox® DocuMate® 3115
User’s Guide
167
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
•
•
Text document (for OCR) forms, letters, memos, or spreadsheets – 300 dpi
Business cards or other items with small print – 300 dpi
Color page with graphics or color photographs – 150 dpi
Color photographs of poor quality for image enhancement – 300 dpi
Color photographs for printing – 200 dpi
Color photographs for email – 100 to 150 dpi
Magazine page with graphics, line art, or color photographs – 200 dpi
Document Size
Standard document sizes
Click the drop down menu and select a pre-defined document size from the list. The available
document sizes are within the scanner's range of minimum and maximum item size.
Custom document sizes
Select the measurement units you want to use from the Units list.
If the Document size list does not include the document size for your scanning batch, click in one of the
fields below the document size list. Input the width of the document in the first field, then input the
height in the second field.
You can input a maximum of 14 or 17 inches in the height field. Please refer to Long Document if your
scanner supports page lengths greater than 14 or 17 inches and you want to scan long pages.
You can only specify values within the scanner's minimum and maximum supported item size. Please
refer to the maintenance section of the scanner user's guide for this information.
Long Document
Select Long document to enable support of paper sizes up to the scanner maximum. After you select
this option make sure you input the page length for your document in the custom input field, located
below the Document size selection list.
Xerox® DocuMate® 3115
User’s Guide
168
Download from Www.Somanuals.com. All Manuals Search And Download.
Note that some of the options in the scanner interface cannot be used when the page length will be
greater than 14 or 17 inches. When you select this option, incompatible options will either be
automatically disabled or the setting will simply be discarded while scanning.
Straighten Image
Select this option to let the scanner automatically determine if a page is skewed, then straighten its
image. This option is only available if the scanner supports this feature.
If you are scanning using an automatic document feeder, and the page is fed through at too great of
an angle, the image may not straighten correctly. In that case, re-scan the page making sure the paper
guides are adjusted to the width of the pages in the input tray so that the pages are pulled straight
through the scanner.
Rotate Image
Select an option in this list to have the final image rotated when scanning is complete.
Flip Back Side
Select this option if you are scanning duplex pages that are calendar style orientation. This option will
rotate the back side image 180 degrees from the front side. When scanning in duplex mode without
this option selected, the back side image of calendar orientation pages will appear upside down in the
final scan. This option does not automatically determine book page orientation versus calendar page
orientation. If you have this option selected when scanning book orientation pages, the image for the
back side of the page will appear upside down in the final scan. If you are scanning a batch of
documents that contain both types of orientation, we recommend that you select Automatic in the
Rotate image list.
This option is available only if the current scanner supports duplex scanning and the Duplex option is
selected in the scanning interface.
Merge Two Sides
When scanning in duplex mode, you can enable this option to have both sides of a scanned item
appear on one page in the final image file. The options in the list allow you to select where you want
the front side image to appear in relation to the back side image in the final file.
Xerox® DocuMate® 3115
User’s Guide
169
Download from Www.Somanuals.com. All Manuals Search And Download.
The following image shows a cheque scanned in duplex mode without Merge two sides enabled, and
the same cheque scanned with Merge two sides enabled. When Merge two sides is not enabled, side 1
and side 2 of the cheque are saved in two separate files (IMG_0001 and IMG_0002 respectively).
With Merge two sides enabled, both sides of the cheque are in a single file (IMG_0003). If you are
scanning a stack of items using a multipage file format, such as a PDF file, then each page in the final
file will have both the front and back images of the scanned items.
Height threshold
Input the maximum height of images to be merged. The sides will not be merged if the height of
either the front or rear image exceeds this value. For example, if you are scanning a batch of mixed
documents such as cheques and statements, you may want both sides of the cheques merged into one
image but not the statements. The Height threshold needs to be lower than the length of the
documents you do not want merged into a single file.
Select one of the options in the Merge two sides list to enable this field. Note that you will also need to
enable Long document if you want to have the maximum height threshold be longer than 17 inches
(431 mm).
Advanced Panel Options
The options in this panel may also appear in the Main panel, but with additional settings for you to
fine-tune the feature you've selected. Select the Advanced source configuration mode to show this
panel.
Xerox® DocuMate® 3115
User’s Guide
170
Download from Www.Somanuals.com. All Manuals Search And Download.
Skip Blank Originals
Select this option to have the scanner detect if a blank page has been fed through the scanner, and
remove it from the final file. Typically you might use this option when scanning a stack of two-sided
pages which have a number of blank sides.
•
Blank threshold—you can use the Threshold slider to fine tune the sensitivity of the blank image
detection. The results will depend on the scan settings and the types of documents being scanned.
In general leave the threshold level at the default setting if you are scanning good-quality
documents printed on standard 20lb printer paper. Try lowering the sensitivity level if your
documents contain light colored text or drawings so those pages are not detected as blank. Raise
the sensitivity level if you are scanning double-sided light-weight paper where images from the
opposite side of the page may appear in the image of the blank side.
Clean Up Edges
Select this option to remove any thin lines from around the edges of the final scan. This option will fill
the margins of the image with the detected edge color. When you select this option, the Width input
field will automatically enable for you to input the size of the area you want to have filled with the
background color. You can specify a fill size between approximately 0.04 to 0.39 inches (1 mm to 10
mm).
Automatic Image Cropping
Depending on the scanner model and installed software, there may be more than one auto cropping
option in the interface.
•
Crop to original—select this option to let the scanner automatically determine the size of the item
being scanned. This option is only available if the scanner supports this feature. This option may
occasionally be grayed out as not all scanning applications support this feature.
Always properly adjust the paper guides to the width of the paper in the input tray so that the
pages feed into the scanner as straight as possible. Skewed pages may not crop properly.
•
Crop to length—this option tells the scanner to crop the final image to the bottom of the page
being scanned. This option is only available if the scanner supports this feature. This option may
occasionally be grayed out as not all scanning applications support this feature.
Always properly adjust the paper guides to the width of the paper in the input tray so that the
pages feed into the scanner as straight as possible. Skewed pages may not crop properly.
Skew detection
This option detects when a page has been fed through at an angle. Select an option from the drop
menu to turn on this feature. When scanning, always make sure the paper guides have been properly
adjusted to the width of the documents in the input tray. This helps to prevent the pages from being
pulled through at an angle.
Xerox® DocuMate® 3115
User’s Guide
171
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Enhancements
Click on the Image Enhancements icon to select options applicable to what type of image processing
you want applied for the items being scanned.
•
Main panel—this panel contains the most commonly used scan settings. Some of the options in
this panel may have adjustment options on the other panels in this section. When the Basic source
configuration mode is selected, this is the only panel available. Change to the Advanced source
configuration mode to enable the other panels which are also described in this section.
The Image enhancements section when the Basic document source configuration mode is selected.
The Image enhancements section when the Advanced document source configuration mode is selected.
•
•
Color processing panel—this panel contains advanced options for processing colors in the final
scans.
Advanced panel—this panel contains advanced image enhancement options for improving the
clarity of the scanned image.
Xerox® DocuMate® 3115
User’s Guide
172
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabled Options in this Section
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either
not appropriate for the current scanner, the software needed to enable the feature is not installed, or
the feature is dependent on another setting in the scanner's interface. Hover the mouse cursor over a
grayed out feature to see information about why the feature is unavailable.
When you are using a scanner that has multiple sources, such as an ADF with Flatbed combination
scanner, some options may be disabled based on the current source displayed in the source list. For
example when the flatbed source is selected, the manual feed option will be disabled.
If an option is unavailable, check to see which source is displayed at the top of the source list when in
the Advanced interface view.
When Flatbed is displayed here, only the
options that can be used for the flatbed will
be available in the scanner interface.
Click on one of the color modes under the
source you want to configure. That source will
now be displayed at the top of the list, and
the options for that source will be available in
the scanner interface.
Note that even when Sources identical is selected, any options that are only available for a specific
source will be discarded if the scanner scans from the source that does not have those options.
Xerox® DocuMate® 3115
User’s Guide
173
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Panel Options
Some of the options in this panel may have advanced adjustment options on a different panel in this
section. When the Advanced configuration mode is selected, an icon will appear next to those features
which have adjustment options on another tab. Click on one of the icons to go to the area of the
interface where the adjustment options are located.
Click on a link below to go to the appropriate page in this section for instructions on adjusting the
option that is displayed on the Main tab.
•
Despeckle
Brightness
Brightness is the overall lightness of the image. Move the slider left or right to darken or lighten the
image. Adjusting the brightness level adjusts the tone of the pixels, without changing the true color of
the pixels; such as when adjusting hue.
Choosing brightness values
Adjusting the brightness level is based on how you want the image to appear and there is no standard
to adhere to. Below are some recommended options for brightness image correction based on the
original document quality.
•
•
•
•
Original documents of good quality - 50%
Pencil written letters, forms, or drawings - 25% to 40%
Faded pictures or old documents with faded text - 35% to 45%
Light colored carbon copy paper, such as yellow or pale pink or pale green, with light text - 45% to
55%
•
•
•
Newspaper or magazine pages - 55% to 70%
Book pages - 55% to 80%
Pictures taken inside or in the shade - 60% to 85%
Xerox® DocuMate® 3115
User’s Guide
174
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness works in conjunction with Contrast for image enhancement. When you are adjusting the
brightness level to improve the scanned image quality, try adjusting the contrast level as well. The
contrast level is the range between the lightest and darkest parts of the image. For example, if you
scanned a document with notes written in pencil, you may have to decrease the brightness level to get
the handwritten notes to appear in the scanned image. However, when decreasing the brightness,
white starts to appear gray in the image. In that case, raise the contrast level to make the differences
between the lightest and darkest part of the image more defined.
Color image brightness examples
The examples below show the original image at the default setting of 50% brightness level, 25%
brightness and 75% brightness. Adjusting the brightness level does not make the image completely
black nor completely white.
Brightness: 25%
Technical note:
Brightness: 50%
Brightness: 75%
Most monitors have a brightness setting that is user adjustable. When viewing scanned images on-
screen, versus printing the image, the brightness setting of the monitor may affect how light or dark
the scanned image looks when compared to the original. If the scanned image is too different from the
original image, or if adjusting the scanned brightness level does not modify the image how you want,
try adjusting the monitor's brightness level. Refer to the monitor's user guide for adjusting the
brightness level and see if the manufacturer has any recommended settings.
Black background scanners:
Some scanners have a black background plate. A black background results in more precise cropping
results and skew detection. However, when scanning thin paper, such as multipart color forms or ruled
writing paper, which are less than 18lb paper weight, the background may “bleed” through into the
final image and make the image darker than it should be. In that case, try adjusting the brightness
level between 60% and 80%.
Contrast
Contrast refers to the differences between the light and dark portions in the image. Move the slider left
or right to decrease or increase the contrast levels. Increasing the contrast level emphasizes the
difference between the lighter and darker portions of the image, decreasing the contrast de-
emphasizes that difference.
Xerox® DocuMate® 3115
User’s Guide
175
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing contrast values
While Brightness adds the same amount of gray or white to all pixels in the image, Contrast adjusts the
pixels based on the pixel color level. For instance, increasing the contrast level will add white to light
colored pixels and gray to dark pixels to make the difference between color levels in the image crisper.
Decreasing the contrast level will have the opposite affect, where light colored pixels are modified with
gray and dark pixels are modified with white to make the transition of colors in the image appear
smoother.
Adjusting the contrast level is based on how you want the image to appear and there is no standard to
adhere to. Contrast works in conjunction with brightness for image enhancement, when decreasing the
brightness level, the overall image becomes darker, in which case you may want to increase the
contrast level so that the differences between the lighter and darker portions of the image are clearer.
Below are some recommended options for contrast image correction based on the original document
quality.
•
•
•
•
Original documents of good quality - 50%
Pencil written letters, forms, or drawings - 55% to 65%
Faded pictures or old documents with faded text - 60% to 70%
Light colored carbon copy paper, such as yellow or pale pink or pale green, with light text - 45% to
55%
•
•
•
Newspaper or magazine pages - 55% to 70%
Book pages - 60% to 75%
Pictures taken inside or in the shade - 40% to 60%
Color image contrast examples
The examples below show the original image at the default setting of 50% contrast level, 25%
contrast and 75% contrast.
Contrast: 25%
Technical note:
Contrast: 50%
Contrast: 75%
Most monitors have a contrast setting that is user adjustable. When viewing scanned images on-
screen, versus printing the image, the contrast setting of the monitor may affect how clear a scanned
image looks when compared to the original. If the scanned image is too different from the original
image, or if adjusting the scanned contrast level does not modify the image how you want, try
adjusting the monitor's contrast level. Refer to the monitor's user guide for adjusting the contrast level
and see if the manufacturer has any recommended settings.
Xerox® DocuMate® 3115
User’s Guide
176
Download from Www.Somanuals.com. All Manuals Search And Download.
Black background scanners:
Some scanners have a black background plate. A black background results in more precise cropping
results and skew detection. However, when scanning thin paper, such as carbon copy paper or ruled
writing paper, which are less than 18lb paper weight, the background may “bleed” through into the
final image and make the image darker than it should be. In that case, try adjusting the brightness
level between 40% and 60%, then adjust the contrast level between 60% and 80%.
Gamma
Gamma is the tone curve and starting point for image enhancement. Move the slider left or right to
darken or lighten the image. As you raise or lower the Gamma value, the values at which Brightness and
Contrast affect the image are changed. It is recommended that you keep the default gamma value, or
adjust this setting before adjusting the other options.
Choosing gamma values
As the gamma value is adjusted lower, the tone curve begins to straighten and the shadows of the
image are expanded, darkening the shadows without overall darkening the image with gray as seen
with lowering the brightness level. This way, the highlights and shadows in the image are maintained
by saturating the pixels with darker levels of the same color rather than adding gray to all colors.
As the gamma value is adjusted higher, the tone curve bends and the highlights of the image are
expanded, lightening the highlights without overall lightening the image with white as seen with
raising the brightness level. This way, the highlights and shadows in the image are maintained by
saturating the pixels with lighter levels of the same color rather than just adding white.
Adjusting the gamma level is based on how you want the image to appear and there is no standard to
adhere to.
Color image gamma examples
The examples below show the original image at the default setting of 1.8 gamma level, then 1.0
gamma and 2.6 gamma. Adjusting the gamma level does not make the image completely black nor
completely white.
Gamma: 1.0
Gamma: 1.8
Gamma: 2.6
Xerox® DocuMate® 3115
User’s Guide
177
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical note:
Most monitors have a gamma setting that is user adjustable. When viewing scanned images on-screen,
versus printing the image, the gamma setting of the monitor may affect how light or dark the scanned
image looks when compared to the original. If the scanned image is too different from the original
image, or if adjusting the scanned gamma level does not modify the image how you want, try
adjusting the monitor's gamma level. Refer to the monitor's user guide for adjusting the gamma level
and see if the manufacturer has any recommended settings.
Invert Image
The Invert image option reverses the color of each pixel in the scanned image.
When scanning in black and white, each pixel is reversed from black to white and white to black. When
scanning in grayscale each pixel is reversed to the opposite level of gray. When scanning in color each
pixel is reversed to the opposite color in the color wheel.
For example, you might choose this option if you are scanning pages that have been printed from
newspaper microfilm. Newspaper microfilm reverses black and white so that when viewed on a
monitor, the text is white and the paper is black.
The following example shows the original grayscale image and the inverted image.
The following example shows the original color image and the inverted image.
Xerox® DocuMate® 3115
User’s Guide
178
Download from Www.Somanuals.com. All Manuals Search And Download.
Mirror Image
The Mirror image option flips the image left-to-right.
Bit Depth Reduction
The Bit depth reduction options are only available when scanning in black and white. Click the drop
down menu and select an option from the list.
Threshold and Dynamic threshold
Threshold enables you to set what level of light or dark to look for on a page. When scanning in black
and white, everything on the page is set to either white pixels or black pixels in the final image. If the
text on the page is a light color, then the text may be gone in the final image as the scanner will
change those light colors to white pixels. The threshold slider lets you set the level of darkness or
lightness of the text on the page. Dynamic threshold attempts to evaluate the image and dynamically
adjust the threshold level. These options work best for documents that contain only text such as
business letters, spreadsheets, reports, etc...
•
Threshold—move the slider to the left or right to set the level of lightness or darkness for the
scanner to leverage from.
For example, if you are scanning a document with gray text, such as hand written pencil notes,
move the slider to the right. This tells the scanner that the level to look for is light, and gray pixels
are converted to black pixels instead of white. If the overall tone of the original document is dark,
such as a colored background that may interfere with detecting black, move the slider left. This
tells the scanner that the level to look for is dark, only very dark areas such as text are converted to
black pixels.
If you are scanning documents that are in good condition, with black text on a white background,
the default threshold option will properly scan the item. This level only needs to be adjusted if the
scanned image does not have image clarity similar to the original.
•
Sensitivity—move the slider left or right to adjust the sensitivity level for dynamic thresholding.
This slider is only enabled when Dynamic threshold is selected in the list.
Xerox® DocuMate® 3115
User’s Guide
179
Download from Www.Somanuals.com. All Manuals Search And Download.
Error diffusion, Bayer, and Halftone pattern
Error diffusion, Bayer, and Halftone patterns are the intentional application of noise (dithering) in the
image to help alleviate banding when scanning in binary (black and white) mode. For example, if you
scan a color photo in black and white, the image file will have large blocks of black and white and the
image barely recognizable. Dithering the image creates a black and white image that is recognizable.
Below is an example of a color scan, a black and white scan without dithering, and a black and white
scan with dithering. When the image is scaled down, it may look like a grayscale scan. When the image
is at normal size or enlarged you will be able to clearly see the dithering pattern, as shown in the close-
up image.
Black and White scan
Bayer dither scan
Color scan
Bayer dither scan - Close up
Color Processing Panel Options
The options in this panel are for setting how the scanner should process colors in specific color modes.
Xerox® DocuMate® 3115
User’s Guide
180
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Dropout
Color dropout tells the scanner and software to remove a specific color from the image. You can choose
either Red, Green, or Blue, or define a custom color, to be dropped out of an image.
To input a custom color using its RGB value, select Custom in this list and then input the values for R, G,
and B in their appropriate boxes, where R, G, and B are numbers from 0 to 255.
Tolerance—use the slider to adjust the precision of the color dropout.
•
More precise—this option removes a range of colors closest to the pure color selected or defined in
the custom fields. For example, pure red has an R/G/B value of 255/0/0. Selecting Red indicates
that the scanner should look for a range of RGB reds close to pure red and remove them from the
image.
•
More approximate—this option removes a wider range of colors based on the pure color selected in
the list or defined in the custom fields.
This option is only available when scanning in grayscale or black and white. The example below shows
the original text with a red watermark and the resulting image with the color removed.
Perform Color Correction
Apply color correction to the image so the displayed colors approximate the original item colors. Select
this option to use the scanner’s default Gamma table which has been calibrated to produce the best
quality color results for your scanner. When this option is not selected, the resulting scans will be dark
and the brightness, contrast, and gamma options will require a greater amount of adjustment to affect
the overall lightness of the image.
Xerox® DocuMate® 3115
User’s Guide
181
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Panel Options
The options in this panel may also appear in the Main panel, but with additional settings for you to
fine-tune the feature you've selected. Select the Advanced source configuration mode to show this
panel.
Despeckle
This option removes speckles from the background. Speckles are small spots on an image that the
scanner interpreted as a valid part of the document. For example, an irregularity in the paper, a small
wrinkle, or holes where a staple was removed may show up as speckles in the scanned image. The
Despeckle option identifies these spots and removes them. This option is only available when scanning
in black and white.
Radius—this is the size of the area that is evaluated for stray dots.
Number—this is the maximum number of dots within the radius that should be considered a speckle. If
this number of dots are in the circle, the dots will not be considered a speckle and remain in the image.
If there are less than this number of dots in the circle, the dots are considered a speckle and removed
from the image.
For example, if the radius is 3 and the number is 5, then the document is evaluated in sections of 3x3
pixels and if there are more than 5 stray dots within a 3x3 area, they are not considered a speckle.
Filter
Use the Filter option to increase or decrease the sharpness in the scanned image. Click the drop down
menu and select an option from the list. Use the Mask slider to adjust the tolerance level of the filter.
Xerox® DocuMate® 3115
User’s Guide
182
Download from Www.Somanuals.com. All Manuals Search And Download.
Moiré Reduction
Moiré patterns are wavy or rippled lines that may appear in the scanned images of newspapers and
magazines, and sometimes scanned images of photos, line drawings, and color scans of textured
paper. Select the Moiré reduction option to have the driver attempt to find and remove moiré patterns
from the image. Please note that when Moiré reduction is enabled the scanner may scan slower as the
image is checked for moiré patterns. This option is only available when scanning in Color or Gray.
Image with moiré patterns Image with moiré patterns
removed
Moiré radius—you can set the size of the area to be evaluated in the Moiré radius field. Adjusting the
radius will produce different results for the various types of items that can be scanned. With this
feature, you may have to test scan a few times, adjusting the Moiré radius as needed, until you obtain
the best results for the type of paper in your scan job. Note that the higher the number is in the Moiré
radius field, the longer it will take the driver to evaluate the image.
White Level
With this option you can set what the scanner should interpret as “white” in the final image, even
though the page being scanned may have a shaded or off-white background. You may want to adjust
this option to have the image automatically corrected when you are scanning irregular paper, such as
thick or thin paper, that may cause the white page in the final image to appear shaded with a pale
grey. This option is only available when scanning in Color or Gray.
For the best automatic results you can simply select the type of paper you are scanning from the list.
Alternatively, you can input a number in the Custom value field. The value you set in this field can be
from 128 to 255. If you set the custom value to 128 you are telling the scanner that all pixels that are
grey level 128 or higher (lighter) should be changed to white in the final image. If you set the custom
value to 255, you are telling the scanner that only pure white is white and anything lower than 255
should remain unchanged in the final image.
Black Level
With this option you can set what the scanner should interpret as “black” in the final image. If you are
scanning items that have notes written with a pencil, you may want to raise the black level to have the
pencil notes appear black in the image. You can set a value for black from 0 to 127. If you set this
value to 127, you are telling the scanner that all pixels that are grey level 127 or lower (darker) should
appear as black in the final image. This option is only available when scanning in Color or Gray.
Xerox® DocuMate® 3115
User’s Guide
183
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver Configuration
Use the Driver configuration section to configure the add-on modules, select interface options, and view
the scanner hardware properties. When the Advanced configuration mode is selected, a scanner panel
option will be available for you to change any hardware settings that may be available for your
scanner.
Disabled Options in this Section
Some options in the interface may be grayed out and cannot be selected. Grayed out options are either
not appropriate for the current scanner, the software needed to enable the feature is not installed, or
the feature is dependent on another setting in the scanner's interface. Hover the mouse cursor over a
grayed out feature to see information about why the feature is unavailable.
Module Configuration
When image processing modules are installed they will appear in the list on the Configure tab. Use this
tab to enable the modules you want to use when scanning.
There are some features in the scanner interface that are disabled until a module is installed that
contains those options. When the module is installed, the features will enable in the scanner interface
for you to use them.
Reordering the Modules
Select a module in the list and click the up or down arrow to change the order of the module in the list.
Changing the order of the modules changes the order in which the image processing options are used.
For example, if there are two modules installed and both modules include an automatic image rotation
option, the first module's rotate option is used and the rotate setting in the second module is ignored
so that the image is not rotated twice.
Xerox® DocuMate® 3115
User’s Guide
184
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanner Configuration
The scanner configuration tab shows the hardware information for your scanner.
Power adjustments:
•
Power off—input the number of minutes you want the scanner to wait before it turns itself off.
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
•
Reset device—click this button to revert the scanner hardware back to the scanner’s firmware
defaults. As this option resets the scanner hardware, you will not see a change in the interface
unless the power save time has been changed. Clicking this button includes returning the power
save time-out to the default setting.
•
•
•
Enable the detection of excessive document skew—when selected, scanning will stop if the scanner
detects that an item is being fed through at too great of an angle.
Exit front-fed paper through the back—when selected, front-fed pages will exit from the back of the
scanner. When this option is not selected, front-fed paper will exit from the front of the scanner.
Calibrate—click the Calibrate button to start the scanner calibration wizard. The scanner self-
calibrates when you click the Calibrate button. The calibration window on-screen will close
automatically when calibration is finished. If it doesn’t close automatically, click the Finish button.
Scanner maintenance:
•
Counters—click the reset button next to the counter you want to set back to 0.
You can use this option to monitor the number of scans completed since the last time a part has
been replaced.
Xerox® DocuMate® 3115
User’s Guide
185
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Properties and Interface Behavior
You can use the scanner’s properties page to keep track of scanner maintenance, change some of the
hardware options, configure the scanner interface behavior, and adjust application options that may
be available for your scanner.
To open the scanner hardware properties page:
•
Windows 7 and 8—from the Windows Control Panel, open Hardware and Sound and then Devices
and Printers.
Right-click on the scanner and then select Scan properties from the list. Click Yes if you are
prompted by the Windows User Account Control to confirm that you want make changes to the
system settings.
•
•
Windows Vista—from the Windows Control Panel, open Hardware and Sound and then Scanners
and Cameras.
Click on the scanner icon then click on the Properties button. Click Yes if you are prompted by the
Windows User Account Control to confirm that you want make changes to the system settings.
Windows XP—from the Windows Control Panel when in category view, open Printers and Other
Hardware and then Scanners and Cameras.
Right-click on the scanner and then select Properties from the list.
Device Settings
Scanner Details
•
Firmware version—this is the current hardware processor chip version number.
Xerox® DocuMate® 3115
User’s Guide
186
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Serial number—the scanner’s unique identification number.
LLD version—the scanner’s base driver version. This is not the OneTouch software revision, TWAIN
or WIA driver versions.
•
Driver version—this is the version of the scanner’s TWAIN driver.
Power Settings
•
Power off—input the number of minutes you want the scanner to wait before it turns itself off.
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
•
Reset device—click this button to revert the scanner hardware back to the scanner’s firmware
defaults. As this option resets the scanner hardware, you will not see a change in the interface
unless the power save time has been changed. Clicking this button includes returning the power
save time-out to the default setting.
Counters
•
Counters—click the reset button next to the counter you want to set back to 0.
You can use this option to monitor the number of scans completed since the last time a part has
been replaced.
Driver Settings
The options in this panel are for configuring how the scanner interface will behave in some scenarios.
Only advanced users should modify any of the options in this section. Options that are not available for
your scanner will be grayed out and disabled.
Xerox® DocuMate® 3115
User’s Guide
187
Download from Www.Somanuals.com. All Manuals Search And Download.
General
•
Lock settings—this option prevents the user from making changes to the options in the scanner
interface. When the interface opens, only the scanning Presets will be available for a user to select
and use for scanning.
•
Default preset—select the preset you want to have be the default displayed options in the scanner
interface each time it opens.
TWAIN Driver
•
•
•
Auto transfer—scanning and transfer starts when the scanner detects paper.
Auto close on transfer—the interface closes automatically when scanning is complete.
Force UI-less—select this option to prevent this scanner interface from opening when you initiate a
scan in the scanning application. This option will only work if your scanning application supports
UI-less scanning. You may also need to select Auto close on transfer complete for this option to
work.
•
Profile overrides capabilities—some scanning applications have the option to adjust the scan
settings and scan without opening this scanner interface. The next time this interface opens, the
last used settings will match the application settings that were used to scan. Select this option to
have the settings reset to the last ones used when this interface was open.
•
•
Enable user compression—this option is enabled only if the scanner and the software allow manual
adjustment of the image compression.
Remember compression—when a compression option is available for user adjustment, it cannot be
saved as part of a preset. Select this option to have the compression setting saved.
WIA Driver
•
•
Use default WIA UI—select this option to display the Microsoft WIA interface instead of the
TWAIN interface in WIA 2.0 applications.
Emulate WIA 1.0—select this option to display the TWAIN interface for WIA 1.0 compatible
applications. When this option is selected, WIA 2.0 applications will use the Microsoft WIA
interface.
Xerox® DocuMate® 3115
User’s Guide
188
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Settings
OneTouch Settings
•
•
Turn on AutoLaunch™ for front-feed scanning—select this option to have the scanner automatically
start scanning when an item is inserted in the front of the scanner.
Function—select the One Touch function number that you want to use for automatic front-feed
scanning. Select Current to always use the current function number shown on the scanner display.
Xerox® DocuMate® 3115
User’s Guide
189
Download from Www.Somanuals.com. All Manuals Search And Download.
Xerox® DocuMate® 3115
User’s Guide
190
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
When servicing the scanner you should take the following precautions to ensure your safety and
prevent damage to the scanner.
Do These
•
Wear protective gloves when cleaning the scanner with Isopropyl rubbing alcohol. Rubbing alcohol
may irritate sensitive skin.
•
•
Only perform scanner maintenance as described in this chapter.
Keep the scanner and cleaning supplies away from any open flame or heat source as any form of
alcohol is flammable.
•
Always read the instructions in each section carefully, the instructions are specific to the part you
are installing or servicing.
•
•
Move the scanner to an area that has adequate room for opening the scanner.
If your scanner has a power cord and/or power switch, always turn off the scanner and unplug the
power cord before performing maintenance, unless the maintenance instructions below
specifically state to leave the scanner plugged in and powered on.
•
Always unplug the USB cable from the scanner before performing maintenance, unless the
maintenance instructions below specifically state to leave the scanner plugged in.
•
•
Wear an anti-static strap to prevent electrostatic discharge when touching metal components.
Keep all cleaning supplies, scanner parts and accessories out of the reach of children.
Do Not Do These
•
•
•
Never attempt installation of any part not described in this manual.
Never service the scanner near a radiator or any other heat source.
Never use aerosol sprays or compressed air, or attempt to lubricate parts with an oil or silicon
spray.
•
•
Never service the scanner in an area where there are open liquid containers.
Never pour or spill liquid on the scanner or any of its components.
Xerox® DocuMate® 3115
User’s Guide
192
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
If your scanner stops scanning due to a paper jam in the Automatic Document Feeder, a warning
dialog box opens after a few moments.
1. Pull the ADF cover release on the top of the scanner body to open the Automatic Document
Feeder cover.
2. Remove the jammed paper and close the cover.
To reduce the number of paper jams, smooth and straighten the paper before scanning and adjust the
guides to the paper size, and insert the paper evenly into the ADF.
Xerox® DocuMate® 3115
User’s Guide
193
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Scanner
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance. You
should clean the inside of the scanner at least once a week or after 5,000 pages have been scanned. If
you are getting frequent paper jams, multiple pages feeding at the same time, or if you’re seeing lines
in the scanned image, it is time to clean the scanner.
Cleaning the Scanner Body
1. Wet a soft cloth with some isopropyl rubbing alcohol (95%).
2. Pull the ADF cover release on the top of the scanner body to open the Automatic Document
Feeder cover.
3. Wipe the scanner glass and plastic surfaces on the inside of the scanner. Make sure you clean the
glass located in the scanner body and on the underside of the scanner lid.
Be careful not to snag the cloth on any of the surfaces inside the scanner.
Scanner glass (underneath
scanner lid)
Scanner glass (scanner
body)
Xerox® DocuMate® 3115
User’s Guide
194
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Wipe clean all of the rollers in the scanner. Be careful not to snag the cloth on the paper sensor.
Paper Sensor
Rollers (located in both
the body of the scanner
and under the scanner
lid).
5. Close the cover when you’re finished.
Cleaning the Docking Station
Cleaning the Input Tray:
1. Wet a soft cloth with some isopropyl rubbing alcohol (95%).
2. Wipe down the input tray with the cloth.
Cleaning the Roller and Pad Assembly:
1. Wet a soft cloth with some isopropyl rubbing alcohol (95%).
2. From the back of the scanner, lower the input tray.
Xerox® DocuMate® 3115
User’s Guide
195
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press down on the two latches on the back of the docking station and lower the rear cover.
4. Wipe the feed roller from side to side. Rotate the roller to clean its entire surface.
5. Wipe the ADF pad from top to bottom. Be careful not to snag the cloth on the springs on either
side of the pad.
6. Wipe clean all plastic surfaces, then close the rear cover.
Xerox® DocuMate® 3115
User’s Guide
196
Download from Www.Somanuals.com. All Manuals Search And Download.
Replace the ADF Pad Assembly
The ADF pad will wear out and is designed to be a user-replaceable part. Problems with documents
feeding into the ADF is an indication that the pad is wearing thin.
You received a replacement pad in the original scanner box, and you can also order a new one. See the
1. From the back of the scanner, lower the input tray.
2. Press down on the two latches on the back of the docking station and lower the rear cover.
The ADF pad is located behind the input tray.
3. Squeeze the plastic clamps that hold the pad assembly in place and lift the pad up and out.
Xerox® DocuMate® 3115
User’s Guide
197
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Reverse the procedure to replace the new pad into its slots.
5. Close the rear cover when you’re finished.
Xerox® DocuMate® 3115
User’s Guide
198
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Roller Assembly
After extended use, the roller may wear out and may need to be replaced. It is a user-
replaceable part and can be reordered.
Frequent paper jams are a symptom of a worn roller assembly. A worn roller can cause
documents to feed in skewed at an angle, or multiple pages to feed at the same time. A
worn roller should be replaced to avoid damage to the scanner’s internal parts. Before replacing the
roller you should clean it as excessive dust on the roller will make it appear worn and smooth. You
cannot properly diagnose a worn roller until you have cleaned it.
1. From the back of the scanner, lower the input tray.
2. Press down on the two latches on the back of the docking station and lower the rear cover.
3. The roller is held in place with a lock tab that rotates to lock and unlock it. To unlock the tab, rotate
it upward until the small lock flange is completely free.
4. When the roller is unlocked, it can be removed from its mounting sockets.
Xerox® DocuMate® 3115
User’s Guide
199
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Discard the worn roller. It cannot be repaired.
6. Before installing the new roller, clean any dust that may have gotten on it during shipping.
7. Insert the right end of the roller into its housing socket in the scanner.
8. Align the lock tab, on the orange lock flange, with the slot in the scanner.
9. Rotate the lock tab into the slot on the scanner.
10. Press down on the lever to lock the roller in place.
The lock will “click” into place when it is secure. However, if it does not rotate easily into the
housing, make sure the flange is properly seating in its latch.
11. Close the rear cover when you’re finished.
Xerox® DocuMate® 3115
User’s Guide
200
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
In addition to the troubleshooting information contained in this section, please see the Readme file on
your installation disc. The Readme file contains additional information that may help you diagnose
problems with the scanner.
If you try the troubleshooting procedures described in this section and in the Readme file, and the
scanner still has problems, visit our web site at www.xeroxscanners.com for additional technical
information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible causes:
•
•
•
•
Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure the cables
are plugged in securely.
Is the scanner’s status light on? Turn on the scanner’s power. If the status light doesn’t come on,
plug the power supply into another electrical outlet.
Did you restart the computer after installing the software? If you didn’t restart the computer, it may
not have loaded all of the software files. Try restarting your computer.
Did you plug the scanner into a USB hub? If you’re using a USB hub to connect the scanner, the hub
must have its own power supply. If the hub does not have its own power supply, plug the scanner
into a USB port on the computer.
•
Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices with
your computer, you may have selected another source for images. Start the PaperPort software
and click the Scan icon, then make sure DocuMate 3115 is selected as the scanner.
Problem: The installation will not complete successfully. If installation finishes, the scanner’s
OneTouch 4.0 options do not seem to work properly.
A likely cause is that some driver programs are already installed on your computer for another scanner.
Or you previously had another Visioneer scanner and that driver program is still on your computer.
They are interfering with the installation and OneTouch options, and you need to remove those other
drivers and re-install your DocuMate 3115 scanner. Please see the documentation that you received
with the other scanner for the steps to remove its driver programs.
Problem: My computer keeps giving me out of hard drive space error messages.
The minimum requirement of 350MB free hard drive space is for the installation of the software and
basic, low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size.
Free up some space on your hard drive for the software to be able to save the scanned images.
Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines.
The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must
be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight.
Xerox® DocuMate® 3115
User’s Guide
201
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem: The paper jams the ADF.
To reduce the number of paper jams, smooth and straighten the paper before scanning, and adjust the
guides to the paper size. Paper fed into the ADF at an angle can cause the feed mechanism to jam. If
paper jams are occurring more frequently, try cleaning the roller with a soft cloth dampened with
Isopropyl rubbing alcohol. Excessive dust on the roller can make it appear worn and will cause issues
Problem: The ADF won’t feed pages properly.
A dirty or worn ADF pad assembly or dirt on the roller can cause documents to feed in skewed at an
angle, or multiple pages to feed at the same time. Try cleaning the roller first. See Cleaning the Scanner
on page 194. If that doesn’t solve the problem, the pad assembly may need to be replaced. It is user-
Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when the
USB cable is plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
1. Unplug the power cable from the scanner.
2. Restart your computer.
3. After the restart is complete, plug the power cable back in.
Problem: Paper jams when it begins scanning from the input tray.
Make sure the front feed tray is closed, and that an item isn’t already in the scanner fed in from the
front.
Problem: The scans from the input tray are always crooked.
Make sure to align the paper guides to the edges of the paper. If you are scanning small items that are
smaller than the paper guides’ minimum adjustment, scan these items from the front feed tray instead.
Xerox® DocuMate® 3115
User’s Guide
202
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Light Troubleshooting Codes
The status light indicates the current state of the scanner. Descriptions of the most common patterns
are listed below. Contact Xerox Technical Support if you experience a different blinking pattern.
Normal Operation
•
•
Steady green: indicates the scanner is ready to scan.
Steady red: the scanner is busy or it is not connected to the computer. If a calibration has been
initiated, the scanner is busy calibrating.
•
Blinking red: the scanner is reporting an error.
Error Codes
If your scanner experiences hardware problems, the status light turns red and will blink a specific
number of times, then pause for 2 to 3 seconds, then repeat the same number of blinks. The number of
blinks between pauses indicates the type of error code.
In all cases, you should turn off the scanner and check the scanner setup. Make sure the USB cable is
plugged into the scanner and computer. Make sure the power cord is plugged into the scanner and into
a wall outlet or USB port.
Error
Code Problem Description
Solution
Red Scanner is not connected to the
computer. (The LED does not
A cable may be loose. Check that the scanner’s cables are correctly
attached to the computer. If the scanner still does not connect, re-
flash and the status light remains boot the computer.
red.)
4
5
Paper jam
Open the ADF and remove the jammed page.
Multi-feed error
More than one page is in the scanner. Make sure that an item
hasn’t been inserted in the front of the scanner when trying to
scan from the input tray.
6
Cover open
The top of the scanner is not fully closed. Close the scanner lid.
All
An internal part in the scanner
Turn off the scanner, re-boot your computer, then turn the scanner
back on. If the problem persists, contact Xerox Technical Support.
Other may have malfunctioned.
Codes
Xerox® DocuMate® 3115
User’s Guide
203
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling Your Scanner
Use the options in the Windows Control Panel to remove the scanner driver and modules, and any
other software provided with the scanner.
Please leave the scanner’s USB cable plugged into the computer while uninstalling the scanner driver.
Unplug the USB cable when directed to do so in the instructions below.
Open the list of installed programs in the Windows Control panel.
•
•
Windows XP: Open Add/Remove Programs
Windows Vista and later: Open Programs and Features
Uninstalling the scanner driver:
1. In the list of installed programs click on Xerox DocuMate 3115 driver.
2. Click the Change/Remove or Uninstall button.
3. Click Yes when asked to confirm that you want to remove the driver.
The driver will now be removed from the computer. When the driver uninstallation is complete the
progress window will automatically close.
4. Turn off the scanner and unplug the USB cable.
5. Reboot the computer if you are prompted to do so.
Follow these instructions to remove any of the other software you installed with your scanner.
Depending on the software provided with your scanner, and which applications you installed during
the scanner setup, the application list may include:
•
•
•
•
•
Visioneer OneTouch
Visioneer OneTouch OmniPage OCR module
Nuance PaperPort
Nuance OmniPage
Nuance PDF Converter
Uninstalling Visioneer Acuity™:
Visioneer Acuity is automatically installed when you install the scanner driver using the installation
disc. You can also download the Visioneer Acuity module from the support pages for your scanner at
www.xeroxscanners.com. Visioneer Acuity is a utility with advanced image processing options to
instantly improve the visual clarity of anything you scan.
1. In the list of installed programs select Visioneer Acuity Assets.
2. Click Yes when asked to confirm you want to remove the software.
Xerox® DocuMate® 3115
User’s Guide
204
Download from Www.Somanuals.com. All Manuals Search And Download.
Depending on the method of installation, and your scanner model, there may be multiple entries for
Visioneer Acuity in the installed programs list. The additional entries in this list are the image
processing libraries needed to support various scanner models. These additional items will be called
“Visioneer Acuity Assets” followed by a version number. In the scenario described here, when you want
to uninstall Visioneer Acuity make sure you select and uninstall Visioneer Acuity. If you uninstall one of
the entries labeled as an “asset” you will still need to uninstall the main Visioneer Acuity utility.
Xerox® DocuMate® 3115
User’s Guide
205
Download from Www.Somanuals.com. All Manuals Search And Download.
The Xerox DocuMate 3115 Scanner
Specifications
Optical resolution
Bit depth
Maximum item size
Minimum item size
Scan method
600 dpi
24-bit color, 8-bit grayscale, 1-bit bitonal (black & white)
8.5" x 36"
3.5" x 2"
Duplex Automatic Document Feeder (Docking Station)
Duplex Single Sheet Fed (Front Feed Tray)
Scanning specifications
Scanning Speed (Input Tray)
AC Power:
15 pages per minute / 30 images per minute @ 200 dpi
USB Power:
6 pages per minute / 12 images per minute @ 200 dpi
Scanning Speed (Front Feed)
AC Power:
4 seconds per page @ 200 dpi
USB Power:
10 seconds per page @ 200 dpi
20 pages of 20lb printer paper (75 g/m2)
16 - 28 lbs. (0.002" - 0.006") (60 - 105 g/m2)
Dual Contact Image Sensor
3-color RGB-LED
Capacity
Paper Thickness
Image Sensor
Light source
Interface
Hi-Speed USB 2.0
Scanner body dimensions
Width
Depth
11.7 inches (298 mm)
3.4 inches (86 mm)
2.8 inches (71 mm)
Height
Docking Station dimensions
Width
Depth
11.7 inches (298 mm)
18.9 inches (480 mm)
11.1 inches (282 mm)
3.5 pounds (1.6 kg)
Height
Weight (Scanner body only)
Weight (With Docking Station) 5.5 pounds (2.4 kg)
Operating temperature
Relative humidity
Power supply
50°~104° F (10°~35° C without condensation)
10%–85% (@35° C without condensation)
DC Jack, 24Vdc/1.0A (24W), 100-240Vac, (Model: HEG42-240100-7L made
by HiTron) or (Model: DA-24C24 made by ADP), ENERGY STAR and RoHS
compliant
AC Power cord
US—3P, 7A/125V, 500mm, 3C x 18AWG, RoHS
2
UK—3P, 2.5A/250V, 500mm, 3C x 0.75mm , RoHS
2
EUR—2P, 2.5A/250V, 500mm, 3C x 0.75mm , RoHS
USB Power Cord
Scanner Rating
A-Type DC Jack, 4P, 1800mm, 26AWG, 19G-0299, -20~80, RoHS
External Power: 24Vdc, 1.0A
USB Power: 5Vdc, 1.0A
Xerox® DocuMate® 3115
User’s Guide
206
Download from Www.Somanuals.com. All Manuals Search And Download.
Power consumption
USB cable
< 12 Watts (during operation)
< 5 Watts (on standby)
Mini-USB connector, 1850 mm, 28AWG, with core, RoHS compliant
Safety and agency certifications UL, C-UL, FCC Class B, CE, RoHS, ENERGY STAR
Supported Operating Systems
Microsoft Windows
- 32-bit XP (Service Pack 2 or 3)
- 32-bit or 64-bit Vista (Service Pack 1 or 2)
- 32-bit or 64-bit 7
- 32-bit or 64-bit 8
Scanner Drivers
TWAIN, WIA
Bundled Software
Visioneer OneTouch
Nuance PaperPort®
Nuance OmniPage®
Nuance PDF Converter®
Xerox® DocuMate® 3115
User’s Guide
207
Download from Www.Somanuals.com. All Manuals Search And Download.
The Xerox DocuMate 3115 Parts List
Please use the following part names and numbers when ordering replacements for your Xerox
DocuMate 3115 scanner.
Part Name
Part Number
Docking Station
85-0533-000
ADF Pad
57-0130-000
57-0113-000
Roller Assembly
USB Cable
35-0225-000
35-0229-000
USB Power Cord
AC Power Cord
35-0226-000 (US)
35-0227-000 (EUR)
35-0228-000 (UK)
Power Supply
37-0088-000
Xerox® DocuMate® 3115
User’s Guide
208
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Regulations
United States (FCC Regulations)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes and modifications to this equipment not specifically approved by Xerox may void the user’s
authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.
European Union
The CE mark applied to this product, symbolizes Xerox’s declaration of conformity with the following
applicable European Union Directives, as of the dates indicated:
December 12, 2006:
December 31, 2004:
Council Directive 2006/95/EC as amended. Approximation of the
laws of the member states related to low voltage equipment.
Council Directive 2004/108/EC as amended. Approximation of the
laws of the member states related to electromagnetic compatibility.
Xerox® DocuMate® 3115
User’s Guide
210
Download from Www.Somanuals.com. All Manuals Search And Download.
This machine is certified as Class 1 LED product. This means that this machine does not produce
hazardous laser radiation.
A full declaration of conformity, defining the relevant directives and referenced standards, can be
obtained from your Xerox Limited representative or by contacting:
Environment, Heath and Safety
The Document Company Xerox
Bessemer Road
Welwyn Garden City
Herts
AL7 1HE
England, Telephone +44 (0) 1707 353434
Other Regulations
Turkey (RoHS Regulation)
In compliance with Article 7 (d) We hereby certify “It is in compliance with the EEE Regulation”.
(“EEE yönetmeliğine uygundur“)
Xerox® DocuMate® 3115
User’s Guide
211
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy Regulations
United States
Congress, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making such
reproductions.
1. Obligations or Securities of the United States Government, such as:
Certificates of Indebtedness
Coupons from Bonds
Silver Certificates
National Bank Currency
Federal Reserve Bank Notes
Gold Certificates
United States Bonds
Federal Reserve Notes
Certificates of Deposit
Treasury Notes
Fractional Notes
Paper Money
Bonds and Obligations of certain agencies of the government, such as FHA, etc.
Bonds. (U.S. Savings Bonds may be photographed only for publicity purposes in connection with
the campaign for the sale of such bonds.)
Internal Revenue Stamps. (If it is necessary to reproduce a legal document on which there is a
canceled revenue stamp, this may be done provided the reproduction of the document is
performed for lawful purposes.)
Postage Stamps, canceled or uncanceled. (For philatelic purposes, Postage Stamps may be
photographed, provided the reproduction is in black and white and is less than 75% or more than
150% of the linear dimensions of the original.)
Postal Money Orders.
Bills, Checks, or Drafts of money drawn by or upon authorized officers of the United States.
Stamps and other representatives of value, of whatever denomination, which have been or may
be issued under any Act of Congress.
2. Adjusted Compensation Certificates for Veterans of the World Wars.
3. Obligations or Securities of any Foreign Government, Bank, or Corporation.
4. Copyrighted material, unless permission of the copyright owner has been obtained or the
reproduction falls within the “fair use” or library reproduction rights provisions of the copyright
law. Further information of these provisions may be obtained from the Copyright Office, Library of
Congress, Washington, D.C. 20559. Ask for Circular R21.
5. Certificates of Citizenship or Naturalization. (Foreign Naturalization Certificates may be
photographed.)
6. Passports. (Foreign Passports may be photographed.)
7. Immigration Papers.
8. Draft Registration Cards.
Xerox® DocuMate® 3115
User’s Guide
212
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Selective Service Induction Papers that bear any of the following Registrant’s information:
Earnings or Income
Court Record
Dependency Status
Previous military service
Physical or mental condition
Exception: U. S. Army and Navy discharge certificates may be photographed.
10. Badges, Identification Cards, Passes, or Insignia carried by military personnel, or by members of
the various Federal Departments, such as FBI, Treasury, etc. (unless photograph is ordered by the
head of such department or bureau.)
11. Reproducing the following is also prohibited in certain states: Automobile Licenses — Drivers’
Licenses — Automobile Certificates of Title.
The above list is not all inclusive, and no liability is assumed for its completeness or accuracy. In case of
doubt, consult your attorney.
Canada
Parliament, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fines or imprisonment may be imposed on those guilty of making such
copies.
1. Current bank notes or current paper money.
2. Obligations or securities of a government or bank.
3. Exchequer bill paper or revenue paper.
4. The public seal of Canada or of a province, or the seal of a public body or authority in Canada, or
of a court of law.
5. Proclamations, orders, regulations or appointments, or notices thereof (with intent to falsely cause
same to purport to have been printed by the Queen’s Printer for Canada, or the equivalent printer
for a province).
6. Marks, brands, seals, wrappers or designs used by or on behalf of the Government of Canada or of
a province, the government of a state other than Canada or a department, board, Commission or
agency established by the Government of Canada or of a province or of a government of a state
other than Canada.
7. Impressed or adhesive stamps used for the purpose of revenue by the Government of Canada or
of a province or by the government of a state other than Canada.
8. Documents, registers or records kept by public officials charged with the duty of making or issuing
certified copies thereof, where the reproduction falsely purports to be a certified copy thereof.
9. Copyrighted material or trademarks of any manner or kind without the consent of the copyright
or trademark owner.
The above list is provided for your convenience and assistance, but it is not all inclusive, and no liability
is assumed for its completeness or accuracy. In case of doubt, consult your solicitor.
Xerox® DocuMate® 3115
User’s Guide
213
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Countries
Copying certain documents may be illegal in your country. Penalties of fine or imprisonment may be
imposed on those found guilty of making such reproductions.
•
•
•
•
•
•
Currency notes
Bank notes and cheques
Bank and government bonds and securities
Passports and identification cards
Copyright material or trademarks without the consent of the owner
Postage stamps and other negotiable instruments
NOTE: this list is not inclusive and no liability is assumed for either its completeness or accuracy. In case
of doubt, contact your legal counsel.
Xerox® DocuMate® 3115
User’s Guide
214
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Recycling & Disposal
USA & Canada
If you are managing the disposal of your Xerox product, please note that the product may contain
lead, mercury, Perchlorate, and other materials whose disposal may be regulated due to environmental
considerations. The presence of these materials is fully consistent with global regulations applicable at
the time that the product was placed on the market. For recycling and disposal information, contact
your local authorities. In the United States, you may also refer to the Electronic Industries Alliance web
site: http://www.eiae.org.
Perchlorate Material - This product may contain one or more Perchlorate-containing devices, such as
batteries. Special handling may apply, please see: http://www.dtsc.ca.gov/hazardouswaste/
European Union
RoHS and WEEE Compliance
This product is compliant with RoHS Regulations of the European Parliament and Council Directive on
the Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
(2002/95/EC), and with the Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC).
Some equipment may be used in both a domestic/household and a professional/business application.
Professional/Business Environment
Application of this symbol on your equipment is confirmation that you must dispose of this equipment
in compliance with agreed national procedures. In accordance with European legislation, end of life
electrical and electronic equipment subject to disposal must be managed within agreed procedures.
Xerox® DocuMate® 3115
User’s Guide
216
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Star for the USA
Energy Program Compliance
The Xerox® DocuMate® 3115 is ENERGY STAR qualified under the ENERGY STAR Program Requirements for
Imaging Equipment.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGY STAR
Imaging Equipment Program is a team effort between U.S., European Union and Japanese
governments and the office equipment industry to promote energy-efficient copiers, printers, fax,
multifunction machine, personal computers, and monitors. Reducing product energy consumption
helps combat smog, acid rain and long-term changes to the climate by decreasing the emissions that
result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory. Your machine will be delivered with the timer for
switching to Power Save Mode from the last copy/print out, set at 15 minutes. A more detailed
description of this feature can be found in the Machine Setup Section of this guide.
Xerox® DocuMate® 3115
User’s Guide
217
Download from Www.Somanuals.com. All Manuals Search And Download.
Xerox® DocuMate® 3115
User’s Guide
218
Download from Www.Somanuals.com. All Manuals Search And Download.
M
G
H
I
N
O
J
JPG
K
One Touch
L
One Touch Button Panel
One Touch Properties window
Xerox® DocuMate® 3115
User’s Guide
220
Download from Www.Somanuals.com. All Manuals Search And Download.
scanner
P
PDF
R
S
T
Scanner
Xerox® DocuMate® 3115
User’s Guide
221
Download from Www.Somanuals.com. All Manuals Search And Download.
U
Use languages and dictionaries to improve
user dictionary
W
X
Xerox® DocuMate® 3115
User’s Guide
222
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|