Xerox Computer Monitor XR6 Series User Manual

User’s Guide  
XR6 Series  
LCD Monitor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
CE Marking Declaration Of Conformity.................................................4  
Features ........................................................................................................9  
Method 1 : Analog (D-SUB) Connection.................................................12  
Method 2 : Digital (DVI) Connection)(XR6-19Dw only) ..........................14  
Installing Your LCD Monitor.........................................................................15  
3 OSD Menu  
Authorized Service Centers.........................................................................28  
2
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recycling Place  
EUROPE  
When disposing of Xerox Branded Monitors in Europe, please contact one of the following  
three locations to make arrangements for recycling.  
Proview International (UK) Limited  
30 The Avenue, Watford, Hertfordshire  
WD17 4AE United Kingdom  
Timothy Lo  
Tel: +44 1923-248-111  
Fax: +44 1923-248-222  
PGL Europe B.V. (Proview Group Limited Rotterdam)  
Satijnbloem 37,  
3068 JP  
Rotterdam  
Hollande  
David Hsieh  
Tel: +31-10-238-1090  
Fax: +31-10-238-1091  
Xoal bvba  
Raketstraat 100-B1130  
Bruessels  
Mr. Leo Starckx  
Tel: +32-2-702-6011  
Fax: +32-2-725-2513  
ASIA  
When disposing of Xerox Branded Monitors in Asia, please contact the following location to  
make arrangements for recycling.  
Proview Technology (ShenZhen) Co., Ltd.  
North Block 21, 23# Shatoukok Free Trade Zone, ShenZhen, China.  
Mr. Dennis Chang  
Tel: +86-755-2526-1512  
Fax: +86-755-2526-1565  
AMERICA  
When disposing of Xerox Branded Monitors in America, please call the following location to  
make arrangements for recycling.  
Proview Technology, Inc. (U.S.A.)  
7373 Hunt Avenue, Garden Grove, CA 92841 U.S.A.  
Patrick Yen  
Tel:714-799-3865  
Fax:714-379-6290  
“THIS DISPLAY UNIT IS AN ELECTRIC DEVICE WHICH MAY CONTAIN HAZARDOUS MATERIALS  
AND COMPONENTS, AND WHICH MUST BE DISPOSED OF AT END OF LIFE ACCORDING TO  
THE PROPER PROCEDURE”  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
FCC/CE  
CE Marking  
Declaration Of Conformity  
This LCD monitor complies with the requirements of the EC  
Directive 89/336/EEC “EMC Directive” and 73/23/EEC “Low  
Voltage Directive” as amended by Directive 93/68/EEC.  
The electro-magnetic susceptibility has been chosen at a  
level that gives correct operation in residential areas,  
business and light industrial premises and small-scale  
enterprises, inside as well as outside of the buildings.  
All places of operation are characterized by their connection  
to the public low voltage power supply system.  
4
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC/CE  
Federal Communications  
Commission (FCC) Statement  
Thisequipmenthasbeentestedandfoundtocomplywiththelimits  
of a class B digital device, pursuant to Part 15 of the FCC Rules.  
Theselimitsaredesignedtoprovidereasonableprotectionagainst  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if  
not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
1. Reorient/Relocate the receiving antenna.  
2. Increase the separation between the equipment  
and receiver.  
3. Connect the equipment into an outlet on a circuit which is  
different from what the receiver is connected to.  
4. Consult the dealer or an experienced radio/TV technician  
for help.  
CAUTION:  
Changes or modifications not expressly approved by the  
manufacturer responsible for compliance could void the user  
authority to operate the equipment.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
Important Safety Instructions  
Important Safety Instructions  
To prevent any injuries, the following safety precautions should  
be observed in the installation, use, servicing and maintenance  
of this equipment.  
Before operating this equipment, please read this manual  
completely, and keep it nearby for future reference.  
Warnings  
Do not place the equipment on any uneven or unstable  
carts, stands, tables, shelves etc. The equipment may fall,  
causing serious injury to children or adults and serious  
damage to the equipment itself.  
Use only a cart or stand recommended by the manufacturer.  
This equipment and recommended cart or stand should be  
handled with care. Quick stops, excessive force, and uneven  
surfaces may cause the equipment and cart/stand to  
overturn.  
Do not disable the 3-wire grounding type plug. The  
grounding pin on the 3-prong plug is an important feature.  
Removing the grounding pin will increase the risk of  
damaging the equipment. If you can not fit the plug into the  
electrical outlet, contact an electrician to install a grounding  
outlet.  
Always operate this equipment from the type of power  
source indicated on the rear of the serial/model plate.  
Never overload wall outlets and extensions.  
Use and handle the power cord with care.  
Do not place any heavy objects on the AC power cord.  
Do not pull the AC power cord. Do not handle the AC power  
cord with a wet hand.  
6
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important Safety Instructions  
Do not touch the power cord and antenna cable during  
lightning.  
Remove the plug from the wall outlet if the equipment will  
not be used for a long period of time.  
Do not place, use or handle this equipment near water.  
Never expose the equipment to liquid, rain, or moisture.  
Seek qualified service if any of the above is spilled into the  
equipment.  
Do not attempt to service the equipment yourself.  
Opening and removing the covers may expose you to  
dangerous voltage or other hazards and may void your  
warranty. Refer service to qualified personnel.  
Always remove the power cord from the outlet before  
cleaning the equipment.  
Never use liquid or aerosol cleaners on the equipment.  
Clean only with a soft dry cloth.  
Do not expose the equipment to extreme temperature or to  
direct sunlight, as the equipment may heat up and suffer  
damage.  
Do not install the equipment near any heat sources such as  
radiators, heat registers, stoves, or any other apparatus that  
might produce heat.  
Do not block any ventilating openings. Leave an open space  
around the equipment.  
Never place the equipment :on a bed, sofa, rug, or any other  
similar surfaces; too close to drapes/curtains/walls, in a  
bookcase, built-in cabinet, or any other similar places that  
may cause poor ventilation.  
(continued on next page)  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Important Safety Instructions  
If any of the following conditions occur, unplug the power  
cord from the outlet and request service from qualified  
personnel.  
a. The power cord or plug is damaged.  
b. Liquid is spilled into the product .  
c. An object falls onto or into the product.  
d. The product has been dropped or damaged.  
e. The product’s display is abnormal.  
DISPOSAL OF WASTE ELECTRONIC EQUIPMENT BY PRIVATE  
HOUSEHOLDS WITHIN THE EUROPEAN UNION  
This sign indicates that this product may not be disposed of with your  
regular household waste. The recycling and separate collection of such  
products is your responsibility. Please drop off the above-mentioned  
waste at a designated place for recycling waste electrical and electronic  
equipment. If you do not know where to drop off your waste equipment  
for recycling, please contact your local city office or household waste  
collection service.  
8
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
1 Introduction  
Features  
Rapid Video Response  
Fast action media such as gaming, DVD and video  
conferencing will playback smoothly thanks to the rapid video  
response time of the LCD panel.  
High Contrast Ratio  
Colors will appear vibrant and lifelike producing superior  
image quality.  
Plug-and-Play Capability  
Easy trouble-free configuration and set-up.  
Very High Resolution  
The 19.1” wide screen has the outstanding 1440x900  
resolution. It can make the image displayed more precise.  
XR6 series is excellent to be your first wide screen monitor.  
Wall-Mounting Capability  
Compatible with the VESA industry standard for wall/arm  
mounts to save valuable desktop space.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Introduction  
Package Contents  
Make sure all of the following contents are included in the box.  
If any items are missing, please return this product to the  
original place of purchase.  
LCD Monitor  
AC  
Power Cord  
D-SUB Cable  
�  
�  
�  
�  
 
Quick  
Guide  
Warranty  
Card  
CD-ROM  
(Driver/Manual)  
CAUTION:  
Be sure to save original box and all packing material for future  
transport of monitor.  
10  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Front View and Controls  
3
4
1
2
5
MENU  
1
Press once to display the OSD (On Screen Display). And  
press again to activate the desired setting.  
2
▼▲  
In OSD mode, press the ▲/▼ buttons to select the desired  
menu.  
3
4
Turns the LCD monitor on and off.  
LED  
The LED light indicates when the LCD monitor is activated  
(blue light indicates power on and amber light indicates  
power saving).  
AUTO  
5
Press to automatically adjust the display settings to optimize  
performance based on the D-SUB signal.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Installation  
2 Installation  
Refer to the owner’s manual of the computer for connections.  
In the process of connecting external equipment, do not connect  
any AC power cords to wall outlets until all other connections  
are completed.  
Connecting Your LCD Monitor to a Computer  
Method 1 : Analog (D-SUB) Connection  
1 Turn off the computer and unplug the power cable.  
2 Connect the signal cable to the D-SUB port on the back of  
the computer.  
3 Connect the power cord to the LCD monitor and wall outlet.  
XR6-19w  
XR6-19Dw  
2
3
Connect to the D-SUB port  
Connect to power source  
12  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
4 Press the button, located on the bottom side of the main  
unit to turn the monitor on, then turn the computer on. If the  
monitor displays an image, the monitor is successfully  
installed. If no image is displayed, check all connections.  
NOTE:  
Unplug the monitor before installation to avoid electric shock or  
damage.  
NOTE:  
The button is used for switching the LCD monitor on and  
off, it does not disconnect the device from the main voltage.  
To completely disconnect the main voltage, please remove the  
power plug from the socket.  
NOTE:  
The LED indicator is blue when the monitor operates normally  
and will turn to amber when in power saving mode. When the  
monitor is off, the LED turns dark.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Installation  
Method 2: Digital (DVI) Connection (XR6-19Dw only)  
1 Turn off the computer and unplug the power cable.  
2 Connect the signal cable (DVI) to the DVI port on the back of  
the computer.  
3 Connect the power cord to the LCD monitor and wall outlet.  
4 Press the button, located on the bottom side of the main  
unit to turn the monitor on, then turn the computer on. If the  
monitor displays an image, the monitor is successfully  
installed. If no image is displayed, check all connections.  
XR6-19Dw  
2
Connect to the DVI port  
3
Connect to power source  
NOTE:  
When the DVI and VGA input ports are connected at the same  
time, press down the AUTO button after 3 seconds to switch  
between the VGA mode and DVI mode.  
14  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installing Your LCD Monitor  
Follow the instructions below to set up and install the monitor.  
1 The package contains:  
Display unit  
Stand  
2 Cover an even stable surface with a soft cloth. Place the unit  
face-down on the cloth. Fit the stand onto the bottom of the  
display unit as shown, then push until the two latches snap  
into their sockets.  
LATCH  
SOCKETS  
LATCHES  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
OSD Menu  
3 OSD Menu  
Using the OSD Menu  
To create the best picture, your XR6 series series has been  
preset at the factory with the Preset Mode Timing shown on  
page 22.  
The OSD (On Screen Display) Menu allows the user to adjust  
various settings and options by following the steps below.  
1 Press the MENU button to display the OSD. The OSD main  
menu provides an overview of the selection of controls  
available.  
auto adjust  
brightness  
contrast  
h position  
v position  
phase  
<up>to select  
picture  
advanced  
options  
utilities  
reset  
clock  
exit  
exit  
2 Press the or button to highlight the desired icon. Then,  
press the MENU button to activate the highlighted icon.  
3 Press the or button to select the desired adjustment  
icon. Then, press the MENU button.  
4 Press the or button to change the value of the selected  
item.  
5 Select the exit icon to exit the OSD.  
6 Repeat steps 1 through 4 to make further adjustments. All  
changes are stored immediately.  
16  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OSD Menu  
The OSD Options  
The main menu includes the following options:  
auto adjust  
brightness  
contrast  
h position  
v position  
phase  
<up>to select  
picture  
advanced  
options  
utilities  
reset  
clock  
exit  
exit  
picture  
Adjusts picture settings such as brightness, contrast.  
advanced  
Allows selection of the general color tint: CUSTOM COLOR,  
WARM, or COOL.  
options  
Adjusts picture settings such as H/V position, H size and  
phase.  
utilities  
Adjusts the setting of the display time of the on-screen menu.  
Allows selection of the language used on all the on-screen  
menus.  
reset  
Restores the factory settings.  
exit  
Exits the on-screen menus.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
OSD Menu  
The picture Menu  
1 The picture menu provides access to the following menus:  
auto adjust  
brightness  
contrast  
h position  
v position  
phase  
<up>to select  
picture  
advanced  
options  
utilities  
reset  
clock  
exit  
exit  
2 The picture menu includes the following options:  
ON  
DESCRIPTION  
auto adjust  
Automatically adjust the display settings to optimize  
performance based on the D-SUB signal.  
brightness  
Controls the overall brightness.  
contrast  
Controls the difference between the brightest and darkest  
regions of the picture.  
h. position  
Adjusts the position of the picture left and right in the  
window.  
v. position  
Adjusts the position of the picture up and down in the  
window.  
phase  
Adjusts signal phase, which can improve focus clarity and  
image stability.  
clock  
Adjusts the width of the picture.  
exit  
Exits the picture menu.  
18  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu  
The advanced Menu  
1 The advanced menu provides access to the following menus:  
sharpness  
color  
1 2 3 4 5  
cool natural warm user  
picture  
advanced  
options  
utilities  
reset  
user red  
user green  
user blue  
exit  
exit  
2 The advanced menu includes the following options:  
ON  
DESCRIPTION  
sharpness  
Increase this setting to see crisp edges in the picture;  
decrease for soft edges.  
color  
Allows selection of the general color tint:  
user, natural, warm, or cool.  
cool  
Inclines colors toward the blue end of the spectrum.  
Fixes the red, green and blue component levels at  
factory settings; they cannot be independently adjusted.  
natural  
Inclines colors toward the natural end of the spectrum.  
Fixes the red, green and blue component levels at  
factory settings; they cannot be independently adjusted.  
warm  
Inclines colors toward the red end of the spectrum.  
Fixes the red, green and blue component levels at  
factory settings; they cannot be independently adjusted.  
user  
Allows the user to adjust red, green and blue color  
component levels independently.  
exit  
Exits the advanced menu.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
OSD Menu  
The options Menu  
1 The options menu provides access to the following menus:  
osd h position  
osd v position  
exit  
picture  
advanced  
options  
utilities  
reset  
exit  
2 The options menu includes the following options:  
ON  
DESCRIPTION  
osd h. position  
Moves the OSD left and right in the window.  
osd v. position  
Moves the OSD up and down in the window.  
exit  
Exits the OSD menu.  
20  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu  
The utilities Menu  
1 The utilities menu provides access to the following menus:  
osd timeout  
15 seconds  
osd background opaque translucent  
picture  
advanced  
options  
utilities  
reset  
language  
exit  
exit  
2 The utilities menu includes the following options:  
ON  
DESCRIPTION  
osd timeout  
Allows selection of the display time of the on-screen menu.  
osd background  
Controls the translucence of the on-screen menu’s  
background.  
languages  
Allows selection of the languages used on all the on-screen  
menus.  
exit  
Exits the utilities menu.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Technical Information  
4 Technical Information  
Preset Mode Timing Chart  
The screen image has been optimized during manufacture for  
the display modes listed below.  
Video signal: (IBM PC/AT)  
Horizontal  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Dot X Line  
720 x 400  
640 x 480  
31.47  
70.00  
60.00  
72.80  
75.00  
56.25  
60.30  
72.20  
75.00  
60.00  
70.10  
75.00  
60  
31.47  
37.86  
37.50  
800 x 600  
35.16  
37.88  
48.08  
46.87  
1024 x 768  
48.36  
56.48  
60.02  
1280 x 1024  
1440 x 900  
63.98  
79.98  
75  
55.47  
59.90  
74.98  
70.64  
22  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Information  
DVI Connector PIN Assignment  
1
9
8
C1 C2  
C3 C4  
16  
24  
17  
PIN  
1
DESCRIPTION  
TMDS Data 2-  
PIN  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
C1  
C2  
C3  
C4  
DESCRIPTION  
GND  
2
TMDS Data 2+  
Hot Plug Detect  
TMDS Data 0-  
TMDS Data 0+  
TMDS Data 0/5 shield  
3
TMDS Data 2/4 shield  
4
5
6
DDC Clock  
DDC Data  
7
8
Analog Vertical Sync  
TMDS Data 1-  
Clock shield  
Clock +  
9
10  
11  
12  
13  
14  
TMDS Data 1+  
Clock -  
TMDS Data 1/3 shield  
Analog red  
Analog green  
Analog blue  
Analog  
+5V Power  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Technical Information  
D-SUB Connector PIN Assignment  
1
6
5
10  
11  
15  
PIN  
DESCRIPTION  
1
2
Red  
Green  
3
Blue  
4
Ground  
5
Self Test  
6
Red Ground  
Green Ground  
Blue Ground  
5 VDC  
7
8
9
10  
11  
12  
13  
14  
15  
Ground  
Ground  
SDA (FOR DDC)  
H. Sync  
V. Sync  
SCL (FOR DDC)  
24  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Information  
Plug and Play  
This monitor conforms to the VESA DDC (Display Data  
Channel) standard, which means that when it is used with a  
DDC compatible video card, the monitor is easier to set up.  
With VESA DDC 1/2B, when the monitor is turned on, it will  
automatically notify a windows 9X/2000/XP host computer of its  
scanning frequencies, capabilities and characteristics. Windows  
9X/2000/XP will automatically recognize the presence of the  
monitor and select the appropriate display resolution.  
Visual Inspection  
Permanently unlit or lit pixels  
The standard of production techniques today cannot guarantee  
an absolutely fault free LCD display. A few isolated permanently  
lit or unlit pixels may be present. The maximum permitted  
number of pixel faults is stipulated in the stringent international  
standard ISO 13406-2 (Class II).  
Example:  
A 17” flat-screen monitor with a resolution of 1280 x 1024  
has 1280 x 1024 = 1310720 pixels. Each pixel consists of  
three subpixels (red, green and blue), so there are about 4  
million dots in total.  
According to ISO 13406-2 (Class II), a maximum of 6 pixels and  
7 subpixels may be defective, i. e. a total of 25 faulted dots. This  
corresponds to approx. 0.002 % of the entire screen surface.  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Technical Information  
Troubleshooting  
Before consulting service personnel, check the following  
chart for a possible cause and solution to the trouble you are  
experiencing.  
Monitor will not turn on  
Make sure the power cord is plugged in.  
No picture  
Make sure the power cord is plugged in.  
Check the signal cable connecting the LCD monitor  
and the computer (refer to page 12-14).  
Press the button on the front panel of the monitor.  
Poor picture or abnormal picture  
Check the D-SUB cable connecting the LCD monitor  
and the computer (refer to page 12-14).  
Press the MENU button to adjust the Brightness  
Contrast option in the OSD.  
Adjust the Color Select option in the OSD.  
Press the AUTO button on the front panel of the  
monitor, to automatically adjust the display mode.  
Out of range message appears  
Press the AUTO button on the front panel of the  
monitor, to automatically adjust the display mode.  
Press the MENU button to adjust the V Position, H  
Position and H Size options in the OSD.  
If using Windows 9X/2000/XP, wait a few seconds;  
once Windows detects the problem, a dialog will  
appear allowing you to manually set up the video  
mode according to the preset mode timing chart  
(refer to page 22).  
26  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Information  
Specifications  
MODEL  
XR6-19w  
19”w TFT LCD  
300  
XR6-19Dw  
LCD Panel Panel Size  
Brightness  
19”w TFT LCD  
300  
Contrast Ratio 500:1  
500:1  
Dot Pitch  
Max. Resolution  
0.284mm x 0.284mm  
1440x900  
0.284mm x 0.284mm  
1440x900  
Input Connector  
Power Source  
Power Consumption  
Dimension  
D-SUB x 1  
D-SUB x 2/ DVI x 1  
AC100-240V, 50-60Hz  
48W  
AC100-240V, 50-60Hz  
48W  
457x371x210 mm  
457x371x210 mm  
Changes are periodically made to this specifications.  
Current specifications may also be obtained via the internet,  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Technical Information  
Authorized Service Centers  
U.S.A.  
CALIFORNIA: AUTHORIZED SERVICE CENTER  
7373 HUNT AVENUE  
GARDEN GROVE, CA 92841  
(714) 799-3899  
(800) 469-1175  
(714) 379-6290 Fax  
Hours: 8AM ~ 6PM - Pacific Standard Time  
TEXAS: AUTHORIZED SERVICE CENTER  
10849 KINGHURST SUITE # 120  
HOUSTON, TX 77099  
(281) 530-4100  
(281) 530-4104 Fax  
Hours: 8AM ~ 6PM - Central Time  
EUROPE  
AUTHORIZED SERVICE CENTER CONTACTS:  
XOAL BVBA  
RAKETSRAAT 100  
B-1130 BRUSSEL BELGIUM  
E-EMAIL: [email protected]  
Hotline: 00800 00 88 77 66  
Fax: +32-2-725-2513  
Hours: 10AM ~ 12PM and 2PM ~ 5PM  
Monday through Friday  
28  
Xerox© LCD Monitor User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weil McLain Boiler CG Series 11 User Manual
Western Telematic Yard Vacuum MPC 20V 1 MPC 8H 2 User Manual
Westinghouse Kitchen Utensil WST2008ZE User Manual
Wharfedale Speaker SH1500 User Manual
Whirlpool Clothes Dryer GEW9260PL1 User Manual
Yamaha Guitar AEX 500NS User Manual
Yamaha Outboard Motor F6A User Manual
Yamaha Stereo Receiver HTR 5440RDS User Manual
Zanussi Freezer 726323 User Manual
Zanussi Washer ZWF 14070 G1 User Manual