Wyse Technology Universal Remote wyse x class 2 and 4 gb ram upgrade option kit User Manual

Installation Guide  
®
Wyse X Class 2 and 4-GB RAM Upgrade Option Kit  
Products: X90mw, X90m7  
Issue: 122211  
PN: 883884-34L Rev. A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Contents  
This page intentionally blank.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
This guide provides step-by-step instructions to upgrade the RAM in the following Wyse X  
class thin clients:  
X90mw  
X90m7  
Kit Contents  
Kit Warranty  
The kit includes a RAM module.  
The warranty on this kit assumes the remaining months of warranty of the mobile thin  
client in which it is installed, or for 90 days, whichever is greater. Installation of this kit will  
not void the factory warranty, however the user will be responsible for damage due to  
improper installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2
Chapter 1  
Wyse Technical Support  
To access Wyse technical resources, visit http://www.wyse.com/support. If you still have  
questions, you can submit your questions using the Wyse Self-Service Center at  
http://support.wyse.com/selfservice.html or call Customer Support at 1-800-800-WYSE  
(toll free in U.S. and Canada). Hours of operation are from 6:00 A.M. to 5:00 P.M. Pacific  
Time, Monday through Friday.  
To access international support, visit http://www.wyse.com/global.  
Related Documentation and Services  
Fact Sheets containing the features of hardware products are available on the Wyse Web  
site. Go to http://www.wyse.com/products/hardware, click the link for your hardware  
product, and then click the link for the Fact Sheet.  
Administrator and other documentation for your cloud client model are available at:  
Wyse Online Community  
Wyse maintains an online community where users of our products can seek and exchange  
information on user forums. Visit the Wyse Online Community forums at:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2
Installing X Class RAM  
This chapter contains information for users of Wyse X class mobile thin clients who must  
install new RAM.  
Requirements  
Small Phillips screwdriver  
Warning  
RAM modules may be susceptible to damage by Electro-Static Discharge  
(ESD). All industry-standard cautions should be followed to avoid ESD.  
Before you remove or install a module, touch any metal part of the chassis  
and keep that contact with the chassis during the installation process.  
Procedures  
Caution  
Follow all precautions listed in the Quick-Start Guide that came with your  
mobile thin client for disconnecting and reconnecting the mobile thin client.  
1. Perform a proper shutdown of the mobile thin client by closing all files and ending your  
session, and then pressing the power button to turn off the mobile thin client.  
2. Unplug the power cord and power adapter, and then remove any other cables from the  
mobile thin client.  
3. Position the mobile thin client to access the bottom cover, and then remove the screws  
from the cover using a small Phillips Screwdriver as shown in Figure 1.  
Figure 1 Removing the bottom cover screws  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
4
Chapter 2  
4. Lift the bottom cover to remove it and expose the RAM module as shown in Figure 2.  
Figure 2 Inserting RAM module  
Warning  
RAM modules may be susceptible to damage by Electro-Static Discharge  
(ESD). All industry-standard cautions should be followed to avoid ESD.  
Before you remove or install a module, touch any metal part of the chassis  
and keep that contact with the chassis during the installation process.  
5. Insert the new RAM module into the empty RAM module connector.  
NOTE: If you are replacing the original RAM module, be sure to unlock the two locking  
clamps at either side of the original module, remove the original module, and replace  
the original module with a new RAM module.  
Caution  
If you are using two RAM modules, both modules must match in size.  
6. Carefully press down on the RAM module until the locking clamps lock it into place.  
7. Replace the bottom cover in the reverse order as described in steps 4 and 3.  
8. Connect the power cord and power adapter, and any other cables to the mobile thin  
client in the reverse order as described in step 2, and then press the power button to  
turn on the mobile thin client.  
9. After the mobile thin client reboots, you can verify that your general client information  
(for example, the Client Information or System Information dialog box information) is  
correct. After verification, the mobile thin client is ready for operation and setup by an  
administrator.  
Tip  
Administrator and other documentation for your mobile thin client model are  
available at: http://www.wyse.com/manuals.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing X Class RAM  
5
This page intentionally blank.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Guide  
®
Wyse X Class 2 and 4-GB RAM Upgrade Option Kit  
Issue: 122211  
Written and published by:  
Wyse Technology Inc., December 2011  
®
®
Created using FrameMaker and Acrobat  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Whirlpool Air Conditioner ACE244PT0 User Manual
Whirlpool Computer Monitor GR563LXS User Manual
Whistler Radar Detector XTR 130 User Manual
Winegard TV Antenna RTS 80B User Manual
Woods Equipment Compact Loader T5040 User Manual
Xerox All in One Printer 4500 PS TR User Manual
Xilinx Automobile Automotive User Manual
Yamaha Speaker System KMS 1000 User Manual
Zebra Technologies Photo Scanner 45537L 005 User Manual
Zebra Technologies Printer PR4T User Manual