Packing
Assembly & Mounting
Operating Instructions
Maintenance
Repair Parts
OWNER’S
MANUAL
MODEL NO.
HK-305
CAUTION
For Operation
Read Rules And
Instructions Carefully
STATEMENT
OF POLICY
It is the policy of Worksaver,
Inc. to improve its products
where it is possible and
practical to do so. Worksaver,
Inc. reserves the right to make
changes or improvements in
design and construction at any
time without incurring the
3 PT. HITCH ADAPTER KIT
HK-305
obligation
changes
to
on
make
these
previously
For A.C. Models
manufactured units.
WD & WD45 Tractors
CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE.
1. Select an area for assembly that is clean and free
of any debris, which might cause persons
working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical
devices.
3. Preview the assembly instructions in your
operator’s manual before proceeding further.
4. If the assembly instructions call for parts or
assemblies to be blocked up, use only blocking
material that is in good condition and is capable
of handling the weight of the assembly to be
blocked. Also insure that the blocking material is
on a clean, dry surface.
6. After completing assembly, thoroughly inspect
the machine to be sure that all nuts, bolts,
hydraulic fittings or any other fastened
assemblies have been thoroughly tightened.
7. Before operating the machine, thoroughly read
the operation section of your operator’s
manual.
8. Before operation, read the maintenance section
of your operator’s manual to be sure that any
parts requiring lubrication such as gearboxes
are full to avoid any possible damage.
9. Before operating equipment. If you have
any questions regarding the proper
assembly or operation, contact your
Worksaver dealer or representative.
5. Never put hands, or any other part of body under
blocked up assemblies if at all possible.
WORKSAVER, INC.
P.O BOX 100, LITCHFIELD, IL. 62056-100
Phone: 217-324-5973 Fax: 217-324-3356
Download from Www.Somanuals.com. All Manuals Search And Download.
This kit is designed to lift up to 1600 lbs., but, of
course, lifting capacity is dependent on the pressure
and condition of the tractors hydraulic system. You
will also find that the closer the load is kept to the
tractor, the more you will be able to lift.
Instructions
(Continued from page 1)
the stabilizer bars need to be reconnected and adjusted
so that the implement is centered behind the tractor.
Remove the two (2) U-Clamps from the top link
bracket, and then slide them over the rocker shaft of
the tractor. Place the top link bracket against the
tractor rocker shaft with the ears extending out toward
you. Slide the U-Clamps over the top link bracket and
bolt them back in place.
CAUTION! Be sure your tractor is in good
condition and properly equipped with counterweights.
Read all the safety precautions and make sure all
tractor operators are familiar with the safety rules of
tractor operation.
Slide the lug end of the top link between the ears
on the top link bracket and pin it in place with the top
link pin and linchpin provided.
CAUTION! When using a 3-pt. Hitch rear
blade in a reverse position (bulldozing), use extra care.
DO NOT RAM BLADE into dirt or packed snow
piles! Tractor lift arms and the blade are not built to
take high impact loads in this position. RAMMING
backwards can also dislodge operator from seat and/or
tractor controls, resulting in possible serious injury or
death.
Always ease the tractor into the load. It may be
necessary to reposition and take less “bite” on the
material to move it safely.
Watch for and avoid hidden obstructions, i.e.,
buried pipes, rocks, concrete piers, uneven concrete
slabs, stumps, etc., when operation. This is especially
of concern when removing snow.
NOTE:
This kit is equipped with the mounting
brackets necessary to use the existing swinging
drawbar on your tractor, and mounts in the same way.
OPERATION
Two (2) holes are provided on the lift arms to
connect to the lower ends of the leveling assemblies.
The forward holes will provide the greatest lifting
range for the ball ends of the lift arms. The rear holes
will allow heavier loads to be handled by the hitch.
The adjustable screw type leveling assemblies will
provide additional adjustment in the lifting height of
the hitch. NOTE: BE SURE THAT AT LEAST 1-
1/4” OF THREAD ON EACH END IS ENGAGED
INTO THE THREADED BARREL OF THE
LEVELING ASSEMBLIES.
MAINTENANCE
Check all bolts and nuts to be sure they are tight.
Periodically oil the following:
a. Top link (upper 3rd link) threads
b. Cylinder pins
The adjustable screw type top link can also be
shortened or lengthened to adapt different implements
and can be used to obtain various degrees of pitch on
the implements you are using.
The 2-way ball sockets on the end of the lift arms
will allow you to connect to either Category I or
Category II implements. If the drawbar or implement
you mount has Category I (7/8” dia.) pins, then make
sure the balls are turned so that the 7/8” dia., holes are
used.
c. Ball sockets
d. Leveling assembly threads
e. Stabilizer bar threads
üKeep children away from danger all day,
every day.
IMPORTANT: If the larger 1-1/8” dia., holes
are used with the smaller 7/8” dia., pins, the
ball holes will wear rapidly in an uneven
pattern and make the entire ball socket
eventually unusable.
üEquip tractors with rollover protection
(ROPS) and keep all machinery guards
in place.
The stabilizer bars should be used whenever possible, as
they provide rigidity and stability to the unit – plus added üPlease work, drive, play, and live each
strength. The stabilizer bars have threaded stubs so their
length can be adjusted so the spread of the lift arms can be
safety and that of your family and fellow
increased or decreased to accommodate the different width
day with care and concern for your
citizens.
of Category I and Category II tools.
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED PARTS VIEW OF
FOR HK-305
Obey All
Safety Warnings
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS FOR
HK-305
3-PT. Hitch Adapter Kit
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS, AVOID NEEDLESS
ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
·
·
Machinery should be operated only by those
who are responsible and are authorized to do so.
Stop the engine, lower all equipment, lock the
brakes, and remove the ignition key before
dismounting from the tractor.
Never stand between tractor and implement
while tractor is being backed to hitch.
Loose fitting clothing should not be worn, to
avoid catching on various parts.
·
A heavy load can cause instability of the
tractor. Use extreme care during road travel.
Slow down on turns and watch out for bumps.
Tractor may need front counter-weights to
counter-balance the weight of the implement.
Reduce speed on hillsides or curves so there is
no danger of tipping.
·
·
·
·
·
·
·
Avoid driving too close to the edge of ditches
or creeks.
Do not transport implement on public toads
without reflectors and slow moving vehicle
emblem in daylight and with approved
warning lights at night and other periods of
poor visibility.
Due to the width of some implements, use
extra caution on highways, farm roads, and
when approaching gates.
Detach implement in area where children
normally do not play.
When performing adjustments or maintenance
on an implement, first lower it to the ground or
block it securely at a workable height.
Only a qualified operator should be permitted
on tractor when in operation; no riders allowed.
Make certain everyone is in the clear before
starting tractor or raising or lowering
equipment.
Operate the tractor and implement only while
seated in the driver’s seat.
Reduce speed when transporting mounted
implement to avoid bouncing and momentary
·
·
·
·
Always be sure the implement is in the proper
position for transport.
Keep alert and watch the front as well as the
·
·
·
rear when working with the implement.
loss of steering control.
Please work, play, and live each day with care and
concern for your safety and that of your family and
fellow citizens.
OWNER’S
MANUAL
MODEL NO.
HK-305
3 PT. HITCH ADAPTER KIT
WHEN ORDERING
HK-305 – For A.C. Models WD & WD45 Tractors
REPAIR PARTS, ALWAYS
GIVE THE FOLLOWING
INFORMATION:
WORKSAVER LIMITED WARRANTY
Worksaver warrants its implements, parts and accessories to be free from defects in
materials and workmanship for a period of six (6) months from the date of purchase. Upon
written approval, Worksaver will repair or exchange without charge any part, which upon
examination by Worksaver or its authorized agent, shall disclose to be defective.
This does not apply to (1) parts that have worn out in normal use, (2) parts broken because
of improper assembly or operation by the customer, (3) parts accidentally damaged, (4) failure
of parts traceable to improper care, (5) parts failing through use of implement for purposes
other than those for which it was designed.
1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM
The obligations assumed by Worksaver and the limitations expressed herein are in lieu of
all other warranties expressed or implied.
MARCH 2001
WORKSAVER, INC.
P.O. BOX 100, LITCHFIELD, IL. 62056-0100
Phone: 1-217-324-5973 Fax: 1-217-324-3356
Download from Www.Somanuals.com. All Manuals Search And Download.
|