Model D4033
Shop Fox Drill Press Table
Instruction Sheet
Fence
Stop
Knob
Fence
Damage to your eyes, lungs, and ears could result
from using a drill press without protective gear,
such as safety glasses, a respirator, and hearing
protection.
Table
Figure 1. Drill press fitted with Model
D4033 drill press table.
Specifications
Size ................................. 233⁄4" W x 117⁄8" D x 3" T
Aluminum Insert T-Slots........................................2
Wooden T-Slots..................................................1
Weight ..................................................101⁄2 lbs.
Construction ...........................Melamine-Coated MDF
Color ........................................................White
Inventory (Refer to Figures 1 & 2)
Qty
Table ..............................................................1
Fence .............................................................1
Fence Stop .......................................................1
Knobs .............................................................5
Clamp Assemblies...............................................2
Clamp Assembly
Figure 2. Installed table.
Installation
1. File down any nicks or burrs in the drill press table,
clean the surface, then wipe a very light coat of
machine oil on the table to prevent rust should any
condensation occur.
2. Place the Model D4033 table onto the drill press
table, align the clamps as shown in Figure 2, then
snug them in place.
COPYRIGHT © JUNE, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#12963JB
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|