Wintec Industries Exercise Bike WBT 200 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 1 Product introduction  
Overview  
GPS LED: (Green LED)  
Green LED Solid light shows location  
fixing incomplete .Blink light shows  
location fixing completed.  
Power LED: (Red LED)  
Red light blinks if battery power is low.  
Red light solid on while charging.  
After fully charged red light will snuff out.  
Bluetooth LED:  
Light turns off when Blue tooth  
connection is off.  
Blue light solid on when Blue tooth  
connection initiates.  
Blue light blinks if Blue tooth connection  
succeeds.  
Temporarily press this to turn on/off  
Bluetooth.  
Press and hold this to turn power on/off.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 2 Features  
WBT-200 is the GSP receiver with internal antenna. u-Nav + iTrax 03  
used in its core is high-tech component and included function of auto-  
log record of journey, which are useful in navigation, security tracking  
purpose, map making and other agricultural needs. USB connector or  
Bluetooth interface ensures easy linking with other electronic  
devices .The GPS acquisition status, the last record of time and  
position can all be stored in unfailing memory. It has 12 GPS channels  
and its low power-consumption can last continuous 10 hours of  
operation. WBT-200 can boast of its smallest size ever with fullest  
features in the world.  
WBT-200 uses iTrax 03 GPS module (u-Nav base) and the high-  
performance CPU.  
Maximum 12 channels can be acquisitioned quickly.  
Internal decode ”WAAS/EGNOS” is used excluding the need for  
external hardware in receiving WAAS/EGNOS signal(depend on  
firmware).  
System supports NMEA0183 3.0 for data transfer.  
Data-logging acts like the in-flight black box and can record of  
position, date and time as long as power source is maintained.  
For down-load of log-data and programming of WBT-200, provided  
software tool “G-Tool” can simplify usage.  
The system is upgradeable with new software which is provided  
free from us.  
It is designed to be water-proof.  
Data link thru bluetooth within 10 meter range.  
Versatile design aimed for car/personal navigation, fleet  
management, AVL, tracking and mapping purpose.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 3 Safety notes  
GPS (Global Positioning System) is provided by the United States  
government. Its accuracy may varies depending on special  
conditions (area at war or if it is blocked). Any control by USA will  
affect this system and its accuracy.  
If installed on the transportation device, driver must not operate  
this while driving.  
GPS performance is affected when satellite coverage is degraded  
as near a high-rise building, in the tunnel or under a cover.  
Personal replacement of components and re-structuring of this is  
prohibited and may result in loss of legal usage.  
Operation of this device is strictly prohibited in highly explosive  
environment such mining, in-flight or other unauthorized area  
against use of this.  
Avoid exposing this at places of high temperature and humidity.  
Return to original dealer immediately if it emits strange smell or  
fume.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 4 Quick user guide  
Package :WBT-200(bluetooth GPS with logger)+USB cable+  
sticker car cigarette lighter power adapter , installation Disk,  
Quick use guide.  
WBT-200 Operation:  
Temporarily press power button to turn it on. The bluetooth and  
GPS status LED will glow to confirm it is in GPS mode.  
GPS LED glows green to show GPS acquisition is done (1 Hz).  
But if this LED is solid on, the GPS acquisition fails.  
Temporarily press on power button. Bluetooth will turn off after  
bluetooth LED goes off. Another press on power button can turn  
bluetooth on after its LED glows again.  
After power on, press and hold power button to turn the power  
off.  
If Power LED (glows red) starts to blink, the power is low and  
needs recharging. Power LED (glows red) stays solid while  
charging .It snuff out red LED after it is fully charged.  
When the USB is used as interface:  
USB driver must be installed first.  
After connection to USB port of computer, place the WBT-200 at  
suitable area where it can best receive GPS signal for  
acquisitioning.  
Power it (or switch its power on).  
WBT-200 will start acquisition.  
When the bluetooth is used as interface:  
Ahead of bluetooth connection, make sure the target device to  
pair can support bluetooth SPP master.  
After pairing with WBT-200, place it at suitable area where it  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
can best receive GPS signal for acquisitioning.  
Activate the software of paired device. WTB 200 starts to  
provide GPS data.  
Battery charging:  
Connect WBT-200 with USB cable and turn on power source.  
To charge it, power source can be supplied from USB host that  
from computer, power adapter, or car cigarette lighter adapter.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 5 Operation notes  
WBT-200 will do self-check once it is powered. Bluetooth and GPS  
start to work when both Bluetooth LED (glows blue) and GPS LED  
(glows green ) turns on. GPS automatically starts acquisition and  
auto-logs. If sky is clear overhead, it requires only 40 sec for  
acquisition. (If the data in its memory is still valid, it needs only  
8~35 sec). After acquisition, WBT-200 starts output data of  
position, speed and time in NMEA0183 format.  
For the first time if it is placed at the area well exposed to the  
satellite signal, this device requires approx 13 min (theoretically  
12.5 min) to receive or update Almanac. Refer to trouble shooting  
guide when signal is not received well.  
If WBT-200 formatting the internal data is not correct, or if satellite  
data has been deleted, it takes longer time to position. But under  
the following conditions, it can take even longer time to do cold  
start.  
If it is not in use for over 3 months (the almanac too old).  
If the recorded data is over 500 km.  
After positioning, WBT-200 transfers navigation data thru export  
interface as below:  
Latitude  
Longitude  
Altitude  
Speed  
Date  
Time(UTC time)  
Estimated error  
Satellite status  
Receiving status  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
After positioning, if auto-log function is activated, WBT-200 begins  
to auto-log the following way.  
Maximum data up to 25360 Points (or more than).  
Recording in a circular way.  
Auto-logging goes on without the need of any device.  
Log-data can be read out using the G-Tool software included.  
Data can be read out thru USB or Bluetooth.  
Data includes latitude, longitude, altitude and time in year-  
month-date-hour-min-sec.  
After successful positioning, it wills automatically auto-log GPS  
data into its internal memory chip. It recorded in a rotational  
order. The earliest (oldest) data will replaced by the latest  
(newest) one when memory space is full (when data excesses  
25360 maximum).  
Auto-log will continue even the Bluetooth is switched off.  
When auto-log function is disable. Its power will be off after 10  
minutes while the Bluetooth is switched off. It will not shut down  
while auto-log function is activated.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 6 USB driver installation guide  
1Execute installation and click “Install”.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2Installation is done when this screen displays.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3Use USB cord to connect WBT-200 to the USB port of computer.  
Computer will automatically check it and seek driver software by  
itself. If PC asks for “device manager” for adding the new USB  
device following USB device connection, take the procedure  
below. Click “next”.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4The screen will display as below. Click “continue anyway”.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5Installation completed.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6Immediately afterwards, PC will ask again to install “GPS  
Receiver Virtual Com Port” driver. Click “ next ”.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7Installation completed.  
To check the installation status, go to the “device manager” .  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8As in the illustration, the USB device (marked in red circle) is  
correctly installed to PC. The illustration also shows USB being  
transferred to Com Port assigned as COM4. In the future,  
whenever the USB device is connected to USB port on the  
computer, the COM 4 acts as the interface for data  
communication.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 7 Using with PDA  
Use of this with PDA for location check.  
It is necessary to install GTOOL(PPC) first in your PDA. Follow the  
following steps.  
Step 1Turn WBT-100 Bluetooth device Power on and then create  
Bluetooth connection with PDA.  
Step 2Supported by GTOOL(PPC), location can be viewed on PDA .  
Step 1Bluetooth connection to PDA.  
1Tap the Bluetooth icon on PDA’s taskbar to view the Bluetooth menu.  
Tap the” Turn Bluetooth ON” to enable Bluetooth.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2Tap the Bluetooth icon again and select the ”Bluetooth Manager”.  
3From Bluetooth Manager toolbar, tap ”New” to search for any other  
Bluetooth devices in its vicinity.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4Tap “Explore a Bluetooth device” to view Bluetooth devices services  
and create a shortcut to them. ClickNext” to continue.  
5Tap “BT-GPS” icon to view the device services.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6Select “SPP slave” services and tap “Next” to create a shortcut to it.  
7Tap “Finish” to complete procedure.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8From the “My Shortcuts” tab, tap the “BT-GPS: SPP slave” icon and  
select the “Connect” option to connect to it.  
9When a connection is successfully established, the shortcut icon  
turns green.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2Using GTOOL(PPC) for locating .  
The GTOOL(PPC) enables you to view your position by latitude and  
longitude, speed, heading, and altitude. Make sure that the GTOOL(PPC)  
had been installed on your PDA as described in GPS CD.  
1TapStart” and select theFile Explorer ”item from the start menu.  
OR click the “GTool” item, then jump to step 4.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2At “My Device” tab, tap the “Program Files”, then select “GTool” case.  
3In the “GTool” case, tap the GTool icon to start it.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4At “Connect Setting” tab, select Bluetooth com port on your PDA at  
“Select GPS Port” item and click Connect ,than select BT-GPS icon.  
(Connect successfully)  
5In the “GPS Data” tab, location data is displayed as below.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6Feature in other tabs :  
“Log Mode Setting ”Log mode setting.  
“Read Log”Read or clean the Log data.  
LOG File (*.tks) default path save as “...\My Documents\*.tks”.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
“NMEA Setting”Set the NMEA output.  
“Init. Mode”: Reboot, Factory Reset, Cold Start, and the firmware version.  
( NoteIf use these features, Bluetooth maybe need re-connect)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
“Satellite”View Satellite Information.  
“Sky Plot”View Satellite Distribution in the sky.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 8 Trouble shooting  
The GPS signal will become weak under the following conditions.  
If the vehicle enters the tunnel. The GPS signal transmits linearly  
down to earth and its signal is blocked out in this situation.  
GPS satellite coverage gets poor because of high-rise building or  
thick forest. Even though WBT-200 can receive reflected weak  
GSP signal, the data might be less accurate.  
The sun shade in the vehicle can partially block out GPS signal  
and effect good reception. The GPS satellite is under control of  
USA and the accuracy might vary depending on some special  
purpose (as may be required by USA).  
It is a normal situation when GPS data displayed by the receiver  
device shows a big difference from real position because of  
unstable atmospheric condition which causes GPS axis to drift  
from actual map axis occasionally.  
Some navigation software can only decode latitude/longitude from  
NMEA0183 provided by logger. No altitude information is available  
and therefore it cannot define vehicle’s position whether that is  
over or under the bridge.  
After successful positioning of WBT-200, if it is moved to another  
area of 500 km away it cannot be easily re-positioned. This is  
because the firstly recorded data (position, time and number of  
satellites acquisitioned) is different from the new area. It will need  
longer time for re-positioning.  
When the power LED flashes red, the battery is critically low and  
needs re-charging. If it is not recharged within 30 min, GPS will  
stop to work to prevent total exhaust of power.  
PIN code will be requested after Bluetooth connection initiates  
between GPS and PDA. Enter code as 0000.  
Avoid placing 2 GPS devices too close during positioning.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth connection takes 5 seconds for self-check. Each time the  
device is switched on; it needs 5 seconds before connection.  
It is normal if the Bluetooth coverage might become short  
sometimes due to environmental interferences.  
USB driver must be installed first before connecting the device to  
the USB port of computer. Make sure of the right COM PORT  
being used.  
If disconnection between PDA and GPS is done in a abnormal way,  
PDA will halt. Try to disconnect Bluetooth connection in a standard  
method.  
If the WBT-200 is found to work abnormally because of wrong  
procedure, reset it by taking off the battery. It will have factory  
default without effecting pre-set program. At the factory default,  
GPS reception begins in a quick start mode and its position may  
take longer time.  
If WBT-200 is used for navigation but found unworkable after  
connection is done. Make sure the format of NMEA0183 that the  
software is used. Then use G-Tool to set it (Refer to the G-Tool  
operation guide).  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weider Home Gym 831159991 User Manual
Westinghouse Power Supply MA7200 2003 N1 Thru MA7200 2040 N1 User Manual
Whirlpool Air Conditioner ACPS82 User Manual
Woodstock Nail Gun W1776 User Manual
Xerox All in One Printer 2121 User Manual
Zanussi Clothes Dryer TD245 User Manual
Zanussi Dishwasher 534314 User Manual
Zanussi Dishwasher ZSF 4143 User Manual
Zanussi Electric Heater EVO700 User Manual
Zanussi Washer Dryer ZWD 1270 S User Manual