DVDRX160
Download from Www.Somanuals.com. All Manuals Search And Download.
1. READ THIS MANUAL
5. HEAT
After unpacking this product read the
manual carefully and follow all the
operating instructions.
Position the unit away from heat sources
such as radiators, heat registers, stoves, or
other products (including amplifiers) that
produce
heat.
6. WATER AND MOISTURE
is product should be operated only
from the type of power source indicated
on the unit. If you are not sure of the type
of power supply to your home, consult
your product dealer or local power
company.
Do not use this product near water such
as near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement,
near a swimming pool or the like.
3. GROUNDING OR POLARIZATION
If this product is equipped with a
Unplug this product from the A/C
outlet before cleaning. Use a damp cloth
to clean the unit. Do not use liquid or
aerosol cleaners.
polarized alternating current line plug
(a plug having one blade wider than the
other), it will fit into the outlet only one
way. is is a safety feature. If you are
unable to insert the plug fully into the
outlet, try reversing the plug. If the plug
should still fail to fit, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
8. POWER CORD PROTECTION
Power supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them. Pay particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.
¡ If this product is equipped with a three-
wire grounding type plug, it will only fit
into a grounding type power outlet. is
is a safety feature. If you are Unable to
insert the plug into the outlet, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the grounding type plug.
Do not overload wall outlets or extension
cords as this can result in a risk of fire or
electric shock.
Unplug the unit from the wall outlet
during storms to prevent damage from
lightning and power surges.
4. VENTILATION
Slots and openings in the cabinet are
provided for ventilation and to ensure
operation of the product and to protect it
from overheating. Do not block or cover
these openings.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
11. OBJECTS AND LIQUIDS
18. SERVICING
Never push objects into this product as
that could result in a fire or electric shock.
Never spill liquids on the product.
Do not attempt to service this product
yourself as this may expose you to
dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
19. REPLACEMENT PARTS
Do not use attachments not
recommended by the product
manufacturer as they may cause hazards.
Be sure the service technician has
used authorized replacement parts.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
13. ACCESSORIES
Do not place this product on an unstable
platform. e product may fall, causing
serious injury or serious damage to the
product.
20. SAFETY CHECK
Upon completion of any service or
repairs, ask the service technician to
perform safety checks to determine
that the product is in proper operating
condition.
Keep your fingers clear of the disc tray
as it is closing. Neglecting to may cause
serious personal injury.
21. BATTERY USAGE
Battery leakage may result in bodily injury
or damage to the unit. In order to avoid
battery problems, please follow ese
instructions.
Do not place heavy objects on the
product. e object may fall causing
serious personal injury and serious
damage to the product.
Install all batteries correctly, with +
and - aligned as marked on the unit.
Do not mix batteries (old/new,
carbon/ alkaline, etc.)
Remove batteries when the unit is
not used for a long time.
Do not use a cracked, deformed or
repaired disc. ese discs are easily broken
and may cause serious personal injury and
product malfunction.
17. DAMAGE REQUIRING SERVICE
Unplug the unit from the A/C outlet
and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is
damaged.
b. If liquid has been spilled into or
objects have fallen into the product.
c. If the product has been exposed to
d. If the product does not operate
normally.
e. If the product has been dropped or
damaged in any way.
f. When the product exhibits a distinct
change in performance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
1
BASIC INFORMATION
FEATURES OF THE RECORDER
6
IDENTIFICATION OF CONTROLS
REMOTE CONTROL
8
9
REMOTE CONTROL INSTRUCTIONS
10
SYSTEM CONNECTION
11
13
CONNECTING THE VIDEO OUTPUT TO YOUR TV
COMPOSITE VIDEO TYPICAL CONNECTION
SVIDEO CONNECTION
COMPONENT VIDEO CONNECTION
SYSTEM CONNECTION FOR RECORDING EXTERNAL SIGNALS REAR PANEL SIGNAL INPUT
FRONT AV INPUTS VIDEO IN, SVIDEO IN
SYSTEM CONNECTION FOR RECORDING EXTERNAL DIGITAL SIGNALS FRONT PANEL
RECORDING MODE
INTRODUCTION
15
SELECTING TUNER CHANNEL
RECORDING TO DVD OR HDD
RECORDING QUALITY
ONE TOUCH RECORDING OTR
DV DIGITAL VIDEO RECORDING
TIMER RECORDING
CHAPTER EDITING
CHAPTER EDITING MODE
MENU DESCRIPTION
20
HDD EDITING
21
HDD EDIT
DISC OPERATION
INTRODUCTION
24
MENU DESCRIPTION
EDIT DISC DVD
TITLE EDITING
25
ENTER THE TITLE EDITING MODE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD PLAY MODE
ENTER THE PLAY MODE
MENU DESCRIPTION
DISPLAY OSD
25
25
25
USB PLAYBACK
HDD PLAY MODE
HDD PLAYBACK
TIME SHIFT
28
29
SYSTEM SET UP
32
33
33
33
35
35
39
OPERATION INTERFACE AND GENERAL STEPS
AUTO CHAPTER MARKER
RECORD QUALITY
APS AUTO PROGRAM SCAN
MODIFY CHANNEL
PROGRAM TABLE
SET UP MENU VIDEO
TV TYPE
SET UP MENU AUDIO
SET UP MENU LANGUAGE
SETUP MENU DATE/TIME
SETUP MENU PREFERENCES
BASIC INFORMATION
41
SETUP MENU TIME SHIFT
APPENDIX (TROUBLESHOOTING GUIDE)
DISC TYPES SUPPORTED
42
43
43
43
43
43
43
43
VIDEO PERFORMANCE
AUDIO PERFORMANCE
INPUT CONNECTIONS
PHYSICAL
SPECIFICATIONS
43
ATTACHMENT
44
SUPPORTED MEDIA DVD R
SUPPORTED MEDIA DVD RW
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Information
Features of the Recorder
e machine is capable of processing and recording various video signals into high quality DVD disc and HDD, such as the input signals
of TV, ordinary disc player and DV.
In addition, the machine can be used as a DVD player of excellent performance. It has all the functions of an ordinary DVD player.
MULTIPLE SIGNAL OUTPUT
1. Composite Video Input
2. S-Video Input
3. Analog Audio Input
4. TV Tuner Input
5. DV Input
1. Composite Video Output
2. S-Video Output
3. Component Video Output
4. 5.1ch Output
5. Optical/ Coaxial Output
6. USB Input
MULTIPLE DVD RECORDING QUALITY
e machine provides users with 6 recording qualities. e resolution and recording time will vary according to different recording
quality and you can decide to make a high quality recording or lower quality with a longer recording time.
MULTIPLE RECORDING MODES
e machine permits 3 modes of recording such as normal manual recording, timer recording and OTR (One Touch Recording).
SIMPLE MENU OPERATION
e machine employs a user friendly-friendly menu operation. Most of operations use only several key presses.
e DVDRX160 supports the following discs and file types:
DVD, DVD R/RW, VCD, SVCD, CD-DA, Mixed CD-DA, MPEG4, DIVX, MP3, JPEG multi-format discs.
Recording: Single Layer DVD R and DVD RW discs.
Terms
HDD HARD DRIVE DISC & DVD DIGITAL VERSATILE DISC
HDD and DVD disc are highly compact devices for storage. Video information is stored in MPEG-II format.
Storage capacity on your DVDRX160 is 160GB.
DVD RW
disc is also called DVD Rewritable disc. It can be recorded to and rewritten about 1000 times.
DISC
DVD R disc is also called write-once DVD disc, it can be recorded to only once. e recorded disc can be played on other DVD players
only after being finalised, then it can not be recorded to again.
Erasing the disc means removing information stored on the DVD or hard disc.
COMPATIBILITY FINALISE
Compatibility (Finalise) means to process the disc so as to make it compatible with other DVD players. Without this process, the disc can
only be played on this machine. is function is relevant to DVD R or DVD-RW discs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING QUALITY
For DVD R/RW disc with the capacity of 4.7GB and HDD disc with capacity of 160GB, there are 6 different recording qualities available
to the user with lower qualities allowing for longer recording times. e recording modes available are:
4.7GB DVD
6HRS
180HRS
120HRS
90HRS
QUALITY
LOW
SLP (Super Long Play):
EP (Extended Play):
LP (Long Play):
4HRS
MODERATE
NORMAL
GOOD
3HRS
SP+ (Standard Play Plus):
SP (Standard Play):
HQ (High Quality):
1HR
BEST
30HRS
TITLE
Each different recording is called a “Title.” Titles are assigned a number for easy access and identification.
Each title can contain one or more “Chapters.” And each chapter is numbered so that it can be found easily.
TRACKS
Music on an audio disc is split up into “Tracks.” Tracks are also numbered for ease of use.
MULTIPLE ANGLES FUNCTION
Some DVD’s allow certain scenes to be viewed from different angles. is function is available only if it is featured on the DVD you are
watching.
MULTIPLE LANGUAGES FUNCTION
Some DVD’s are recorded in several different languages. e different languages can be accessed by selecting the language menu.
SUBTITLE FUNCTION
Some DVDs contain subtitles in different languages. By pressing the SUBTITLE key on your remote while watching your DVD, you may
cycle through the different subtitles.
PROGRESSIVE AND INTERLACED
Interlaced picture mode displays only half of the resolution of progressive mode at once. Making progressive scan a better option for
compatible televisions. Make sure your television supports Progressive Scan before selecting this option.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
1
2
3
4
5
6
7
8
9
10 11 12 12
13
14
15
9. DV IN 1394 MINI FIREWIRE
10. SVIDEO INPUT
TRAY
3. OPEN/ CLOSE
4. PLAY/ PAUSE
11. COMPOSITE VIDEO INPUT
13. USB INPUT
6. HDD/DUB
14. DISPLAY
8. SOURCE
1
3
5
7
Rear Panel
2
4
6
7
8
9
1. RF IN
2. RF OUT
7. 5.1CH AUDIO OUTPUT
FL, FR, SL, SR, CEN, SW
3. STEREO AUDIO INPUTS
4. VIDEO INPUT
8. COMPONENT/ PROGRESSIVE SCAN VIDEO
OUTPUT
5. COMPOSITE VIDEO OUTPUT
6. COAXIAL DIGITAL AUDIO
OUTPUT
9. SVIDEO OUTPUT
10. OPTICAL DIGITAL AUDIO OUTPUT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1. STANDBY - Turn the unit on or set the unit to Standby mode.
2. DVD - Press to view or play optical disc content. While in DVD playback,
pressing DVD will bring up the DVD menu.
3. HDD/DUB - Press to view HDD title list or the dubbing menu.
4. FILE/USB - Press to enter File Manager
5. DV-Press to select DV IN as input source.
6. TIMER - Access the timer menu for scheduled recording setup.
7. FUNCTION
8 / 9. FWD/REV - Scan in fast reverse or forward on DVD or CD.
10. NUMBER KEYS - Enter numeric values while setting options.
11. SELECT - Select option in menus. Play a disc, chapter or track with some discs. For
other discs, press PLAY key.
12. SETUP - Access the on-screen setup Menu for settings adjustment.
13. EDIT - Access the edit menu for DVD + R/RW editing options.
14. OSD - Bring up the on-screen display showing information for the playback
21
22
24
26
29
3
5
7
15. CH(-/+) - Adjust Channels.
16. VOL(-/+) - Press to turn the volume -/+.
30
31
17. ANGLE - Select between multiple angles with DVD discs that support this feature.
18. MUTE - Temporarily cancel audio playback.
19. ZOOM - Press to magnify the screen with DVD JPG or other disc.
21. OPEN / CLOSE - Open /Close the disc tray.
32
33
22. TV / REC MODE – Switch to TV mode, change between Timeshift and Manual
recording modes.
23. SOURCE - Press to select through audio/video input sources.
24. QUALITY- Select the recording quality mode: HQ, SP, SP+, LP, EP, SLP.
25. REC - Press to begin a live recording.
26. PLAY/PAUSE- playback a disc, chapter or track. Press again during playback to
pause. Playback or Pause the disc.
27. STOP - Press once to stop playback and hold the last position in memory.
Playback can be resumed where it was left off by pressing PLAY. Press twice to
clear the last playback position.
28/29. PREV/NEXT - Advance to the next track or play previous track on DVD or other
disc.
34
35
14
16
36
37
17
20
40
30. GOTO - To Select your desired time, chapter of the disc to play.
31. ADD/CLEAR - Use to delete characters when entering words, further more, you
can use it to program your playback order.
32. MENU - Access DVD or other disc’s menu, and can turn PBC function ON/OFF
when playing VCD/SVCD.
33. (UP/DOWN/RIGHT/LEFT)- Use direction keys to highlight the item you desired.
34. RETURN - Resume playback for DVD discs or other discs.
35. SLOW/SORT - During playback, press to scan in slow forward. If in Title list .Press
to sort the HDD titles. e Sort can be based on ascending or descending record
time, or the sort can be based on title name. e switch cycles through these
options.
36. STEP - Step by step playback.
37. SUB-T
38. TITLE - Access the title screen on DVD discs, displaying a graphical representation
of the recordings and providing easy Navigation.
39. REPEAT - Select to repeat chapter, Title or Disc.
40. A-B RPT - Set the beginning and end points of a section to repeat.
41. PSCAN - Select the video out format for progressive scan mode or Interlace Scan.
42. PAL/NTSC - Set the video system to PAL, NTSC or multi system.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
■
Do not drop the remote controller or leave it in places of high humidity.
Do not leave the Infrared receiver exposed to direct sun light or bright light.
Do not use new and old batteries together. Try not to use rechargeable batteries.
30º
30º
operate from a 30º angle.
However you will always get
the best result when you direct
the remote to the IR sensor
located on the unit.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connection
Connecting the video output to your TV
In order to use the DVD Recorder, you’ll need to make a video connection to your TV. e capabilities of your TV and the cables you
have on hand will determine the connections you can use.
ere are 3 possible connection types:
Composite Video: e most widely used connection. is unit includes an A/V cable for Composite Video.
A higher quality connection that requires a special S-Video cable and an S-Video capable TV.
- Component Video: e highest quality video connection. Supported on high-end TVs and requires a special cable.
Composite Video (Typical Connection)
is unit ships with a composite video (A/V) cable for connection to TV with a standard video input as shown below . is is the most
widely used type of connection. On most TV’s, this connector is coloured yellow, and is normally accompanied by stereo audio inputs,
coloured red and white for stereo channels right and left respectively.
1. First, use the supplied A/V cable to connect to the composite video input on your TV, this is normally a yellow coloured connector
that matches the video output on the back of this unit.
If you wish to hear sound through the TV, connect the red and white stereo audio connections as well.
2. Turn on the TV and DVD recorder and select the AV mode on your television. is is usually done by pressing ‘TV/AV’ or ‘Mode’ on
your television remote. Consult your TV manual for further instructions on how to do so.
Connect the Yellow Video
Lead and the Red and White
Audio Leads to the back of
your TV, using the supplied
AV Cable.
DVDRX160
11
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video Connection
is is a higher quality connection than standard composite video, and requires a special S-Video cable (not included).
e S-Video connector is distinguishable by its 4 pins, as shown below. If your
TV has an S-Video input jack, it’s recommended that you use this type of connection for better picture quality.
SVIDEO CONNECTION
1. Use a S-Video Cable, connecting the
TELEVISION
S-Video output from your DVDRX160 to
the corresponding input on your TV
2. Turn on the unit and select ‘DVD Mode’
3. On your TV select the S-Video Input.
is is normally done by pressing ‘TV/AV’
or ‘MODE’ on the remote. Consult your
TV manual for further instructions on
how to do so.
S
DVDRX160
Component Video Connection
e highest quality connection, Component video, requires three separate cables for the video connection (red green and blue).
Component video can output in two modes: YCrCb (interlaced) and YPrPb (progressive scan). Progressive scan will yield a higher quality
image, however, some televisions will not support this mode (consult your manual before attempting to output progressive mode).
COMPONENT CONNECTION
1. First, connect a component lead (not included)
from the YCb/Pb Cr/Pr terminals on the
DVDRX160 to the component input on your
TV. If you wish to use progressive scan, ensure
that you connect to a YPbPr input.
2. Select the component input on your TV
(consult your manual for more information)
3. To switch between interlaced and progressive
scan modes, press PSCAN on the remote, then
SELECT.
DVDRX160
PROGRESSIVE SCAN: RESETTING THE VIDEO OUTPUT
If you inadvertently switch the OUTPUT FORMAT setting to PROGRESSIVE while using a
standard TV not capable of PSCAN, you will lose video. If this happens, reset the recorder to its
default video settings by pressing PSCAN and SELECT on the remote.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Output Connections
is unit features a variety of audio outputs for connection to a receiver or other audio equipment.
-
-
Use the included A/V cable to connect the stereo audio outputs for connection to a TV or stereo receiver.
Optical and Coaxial digital audio outputs send an encoded digital bitstream, suitable for receivers with Dolby decoding capability.
ese outputs require special cables not included.
AV RECEIVER WITH
DVDRX160
Antenna & TV Connections
Your DVDRX160 is available with an antenna pass through connection. Use an antenna or cable TV connection to connect the RF input
and RF out to connect to a TV.
ANTENNA OR CABLE CONNECTION
WITHOUT PASSTHROUGH CONNECTOR
TELEVISION
13
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connection for recording external signals (Rear Panel Signal Input)
Audio/ Video inputs are provided on the front and back side of your DVDRX160 for connection of outside audio/ video sources such
as VCRs, Camcorders, DVD Players etc. External sources must support Composite Video and S-Video or stereo audio to be suitable for
recording.
COMPOSITE VIDEO INPUT CONNECTION
DVD PLAYER, VCR, STB ETC.
FRONT AV Inputs (Video In, S-Video In)
S-VIDEO or
COMPOSITE
DVD PLAYER, VCR, STB ETC.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connection for recording external digital signals (Front Panel)
When connecting external signals, be sure to switch off the power source of the unit and other devices
DVDRX160
Refer to the manual of your
mini firewire or usb device for
further instructions on how
to connect
USB FLASH DRIVE
DV
IN/OUT
CAMCORDER WITH IEEE1394 OUTPUT
Recording Mode
Introduction
ere are various external signal inputs in the unit, including
■
■
■
■
■
S-Video
Composite Video
TV tuning
DV input
Stereo audio input
You can select any group of audio and video signals from these inputs for recording.
Upon inserting a new disc, the unit needs to initialise the disc.
Please wait until this is finished to start recording!
Manual Recording
Recording Source
You can select which video input the unit should record from. e following options are available
■
■
■
■
Tuner
Front CVBS (Composite)
Front S-VIDEO
DV Input
Press the SOURCE button (repeatedly) to change the video source and select one of the above.
Note: If you are recording from a rear source, make sure your audio connections are connected to the rear audio inputs.
If you are recording from a front source, make sure your audio connections are connected to the front audio inputs.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Tuner Channel
In Tuner Mode:
■
■
Press the button CH+/- on remote control to select the channel
Press the number keys and then press SELECT button to select the channel
Recording to DVD or HDD
■
■
Select recording target drive (DVD or HDD)
Press Source button once to switch to manual recording mode, and press DVD or HDD/DUB button to switch between DVD or
HDD Record.
■
■
If you have a recordable media in the tray, you can press REC and start recording (OTR) to DVD. Press Stop to finish recording.
To pause the recording, press the PLAY/PAUSE button on the remote control . Press the PLAY/PAUSE button or the REC button to
resume recording. Recording will continue until the STOP button on the remote control or the product front panel is pressed.
1. In SOURCE status for Manual Recording, the procedures for recording to common DVDs: (please refer to the illustrations for the
positions of OPTICAL DISC and HARD DISC)
When the TV displays OPTICAL DISC, press REC button to record to the optical disc;
When the TV displays Hard DISC, press DVD button, and then press REC button to record to the optical disc.
Recording Quality
You can select from up to six record quality settings to define the amount of space you want to use on the DVD/HDD.
Higher quality recordings will consume more space and low quality recordings will consume less space on the DVD/HDD.
NOTE: Use the QUALITY button to switch between different record quality options.
4.7GB DVD
6HRS
160GB HDD
180HRS
90HRS
QUALITY
LOW
SLP (Super Long Play):
EP (Extended Play)
LP (Long Play):
MODERATE
NORMAL
GOOD
3HRS
SP+ (Standard Play Plus):
75HRS
SP (Standard Play):
HQ (High Quality):
2HRS
60HRS
VERY GOOD
BEST
30HRS
One Touch Recording (OTR)
is function enables you to set up the timer during the recording process. Once the scheduled time is reached, the system will stop
recording automatically.
1. Enter the Recording Mode and start recording.
2. For desired timer recording, press the REC button once or several times.
■ e recording time will increase by 30 minutes with every press of the REC button. If the scheduled time exceeds the
recordable time of the disc, normal recording mode will restore.
■ If the timer recording is paused or stopped, the system will cancel the timer recording process.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DV (Digital Video) Recording
1. is unit can perform real-time monitoring and recording for a DV through the IEEE 1394 serial port (DV).
Connect the DV to the unit (for details, see System Connection: System Connection for Recording).
■ Switch on the power of the unit.
Press the Source button until DV Input is selected.
Switch on the Power button of the DV, set it to CAMERA mode, and start monitoring.
■ Press the REC button to start recording. (Other operations is the same as in the Recording Mode)
2. is
■ e connection method is the same as stated in the first 3 steps of step 1 above.
Switch on the Power button of the DV unit to enter Playback mode
Press the REC button to start recording
During the recording process, press the PAUSE button to suspend recording of the unit, and press again to suspend the DV unit.
To restore play of the DV unit, press the PLAY button; if you press the REC button, the play of the DV unit and the recording will
resume at the same time.
While paused the FWD, REV buttons operate the DV; if you press the STOP button, the recording of the unit will stop first, press
again to stop the play of the DV.
File Manager
File manager allows you to browse, play and copy files across the three storage devices (DVD, HDD and USB). Press FILE/USB to
enter the file manager.
To navigate the file manager, use the arrow keys to select a file or folder. Pressing select on a compatible media file will start playback.
Pressing Right on a file will call up the file submenu, with the options as follows:
■
Copy: allows you to copy a file to another destination. Selecting copy brings up the destination window, navigate to select the copy
destination. Once you have selected the drive and folder to copy to, press right and select Complete to begin the copy.
Delete: will delete the file. Note that some files may be copy protected and unable to delete.
Rename: will call up a keyboard to rename the file. Take care to preserve the extension of the file. (xxxx.mp3, xxxx.jpg, etc)
Move: similar to copy, however the file is removed from the source directory.
Create dir: will create a sub directory in the current directory, enter using the keyboard
Select all: selects all the files in the current directory. Any actions, such as copy, move or delete apply to the selected files.
Unselect all: unselects all files in directory.
■
■
■
■
■
■
Note: pressing add/clear will select/unselect individual files
ONLY USE A BLANK REWRITABLE DVD DISC,
OR A DISC PREVIOUSLY USED ONLY FOR
ARCHIVING FROM HDD.
DISC, THERE WILL BE A FLASHING ICON ON
THE UPPER LEFT CORNER OF THE SCREEN TO
INDICATE THE RECORDING PROCESS.
HDD-to-DVD Recording
1. Press the HDD/DUB button to enter into the HDD mode.
2. Press ADD/CLEAR to select the titles that you desire to
copy to DVD.
3. Press the HDD/DUB button again toto copy the
selected files to DVD.
HDD
File Manager
00:00:00 -
../
No. CH
Date
Time
Title
1
kendachi01.flac
001 F-5V
20/09/06 15:19 Title 1
00:38:52
SP PAL
002 R-COMP 20/09/06 13:42 Title 2
003 F-S 22/09/06 10:41 Title 3
2
3
4
crossley.
mandms.
Press Add/Clear key to
select program(s)
cocoa_overd.
File Size: 12MB
Modify Date:
27 /03/ 2007
Press Dub key to copy
selected program(s)
to DVD
Right
Menu
Operation menu
Return Previous menu
Select Play highlighted file
Press Sort key to sort
programs by name, date
or time
Add
Select/Unselect file
For other options Press DVD,
TV/Video, USB, SETUP or TIMER keys
kendachi.flac
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording
You can set up your DVDRX160 to schedule recordings to begin and
end at specific times. To do this:
1. Press the TIMER button to enter the timer recording menu,
as shown.
Timer Recording
You can set up to 8 different scheduled recordings at once.
2. In the timer recording menu, use the UP or DOWN buttons
to select a record, then press the SELECT button.
3. Set up the input source
No. Source Quality Date
1
Start
End
Record
2
3
4
5
6
In the Timer Recording Setup box, select “SOURCE” from
the menu and use the UP or DOWN and SELECT buttons to
select the source.
You may select hard drive or DVD (Optical Disc) as the
destination for the recording.
5. Set Recording Quality:
Press Select to review a scheduled recording or
create a new one, press Functions for other options.
Select Quality from the menu and use the UP or DOWN and
SELECT buttons to select the quality value (see Recording
Quality for more information).
6. Set up Recording Time:
Select ‘Mode’ from the menu and select one of the options in
Timer Recording Setup
Source
Record to
Quality
Mode
Date
CH029
Weekly:
Daily:
Once:
Record Daily Monday to Friday
Record for one time on the specified date and
Front S-VIDEO
CH028
CH029
Once
21/09/06
0 0 : 2 4
0 0 : 2 4
My Title
7. Set up Recording Date:
Start
For weekly recordings > move the cursor to the right control
unit in the row and press the SELECT button to pop up a week
list. Select a proper value according to your need.
End
Title
OK
Cancel
For Once only recordings > Select ONCE and press the SELECT
button. e date input editor box will appear on the right.
Highlight the box and the SELECT button, then use the number
buttons to enter the date in the form of DD/MM/YY, press the
SELECT button to confirm. If the input is invalid, the system
will prompt an input error message. At the same time, the Date
Input Editor Box will be left empty. Please enter the date again.
UP/ DOWN or 0~9 to change the value,
SELECT to confirm the value.
Timer Recording Setup
Source
CH029
HDD
SP
Record to
Quality
Mode
Date
Once
Once
Daily
Weekly
Start
End
0 0 : 2 4
My Title
Title
OK
Cancel
Record expedites only on the date set
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Set up the start time of the recording:
In the timer recording set up box, use the arrow buttons and
then press the SELECT button to highlight the Start option.
Enter a time between 0:00 and 23:59 with the number buttons
and press SELECT to confirm.
Timer Recording Setup
Set up the end time of the recording:
Set the recording end time following the instructions above
after having highlighted the End option.
Source
CH029
Record to
Quality
Mode
Date
HDD
SP
9. Set up the record title:
Use or ▼ to change letters and then press the SELECT
button to enter it.
10. After completing setup, highlight the OK button and press
SELECT.
11. Press the TIMER button to exit the timer recording setup
menu.
Once
21/09/06
0 0 : 2 4
0 0 : 2 4
My Title
Start
End
Title
OK
Cancel
12. If the system is operating five minutes before the scheduled
time for recording, an information box will pop up, prompting
you whether to start recording or not. To record, highlight OK
and press the SELECT button to confirm.
UP/ DOWN or 0~9 to change the value,
SELECT to confirm the value.
If the information box is left unattended, the unit will
automatically record and will continue according to the set
schedule.
13. If the system is in standby status, it will enter the recording
mode automatically 3 minutes in advance and start recording
to schedule.
SELECT ANY TIMER RECORDING ITEM AND
PRESS THE ADD/CLEAR BUTTON TO DELETE IT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Editing
Chapter Editing Mode
Edit Mode
In DVD mode, press ‘DVD’ to enter the DVD title menu. Select a
title and press the RIGHT button to show the Title Menu and select
‘Edit Title’ to enter the Edit Menu.
Title : 04/04
Chapter : 01/01
THE CHAPTER EDITING FUNCTION IS ONLY
AVAILABLE ON UNFINALISED DVD R/W DISCS.
Play
Menu Description
Chapter Marker
Hide Chapter
st number is the title to be edited; the 2nd is the total
number of the titles on the disc.
2. Chapter: e 1st number is the current chapter; the right is the
total number of chapters in the title.
Index Picture
Split Title
3. Play: e function is the same as the Play Mode.
4. Chapter Mark: Split or Combine Chapter function.
5. Hide Chapter: Hide or Show Chapter function.
6. Index Picture: Set current picture for displayed in disc menu.
7. Split Title: Split the title in two at current position.
8. Time: Time Selection Play.
Time : 0:00:02
Exit the Chapter Editing
Edit Mode
1. Press the STOP button to exit this mode.
When exiting, please wait while the system writes information
to the disc.
Title : --
Chapter : 01/01
Play
Chapter Marker
Hide Chapter
Index Picture
Split Title
Time : 0:00:02
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD Editing
HDD Edit
In HDD mode editing options for each title are accessed from the
Title List menu. Press the RIGHT ARROW to access the popup
menu.
Note: You can access the Edit Menu whilst recording.
While editing an icon appears next to the title in the title list.
HDD
No. CH
Date
Time
Title
Play
001 Ch034
11/30/99 00:07 Title 1
Delete
002
Ch042
Title 2
11/30/99 00:22
11/30/99 00:22
11/30/99 00:23
11/30/99 00:27
003 Ch042
004 Ch042
005 Ch059
Title 4
Split
Title 3
DELETE
Segment
Change Index Pic
Rename
Lock
Title SBCNNN
If a title is not Protected or Locked, select this option to delete it.
Be careful, once deleted, titles cannot be retrieved!
Play the program
Protect
To split a program, select SPLIT and navigate through the program (similar to Playback) and mark a location at which the program will
be cut into 2 separate programs.
Title Split
0:00:00
2:00:00
0:40:00
You can use all navigation features, (press OSD to bring up the keys on the bottom of the screen, pressing Info again will remove the help
information).
Note:
Split is irreversible. Once the program has been split, the 2 titles can not be put back together.
■
■
■
Split screen can only be accessed if the title you want to split is not Protected or Locked.
e Return Key will cancel back to HDD title list without splitting
Accuracy of Split location is within 0.5 second
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SEGMENT
Segment mode allows you to hide segments from the recording. Such as ad breaks. Segments will be skipped when played back from the
Hard Drive and will not be copied to DVD using DUB.
Segments can be re-edited.
When you enter the Segment Mode the title will automatically start playing. You can use the playback navigation keys to move to
anywhere in the title and apply a segment.
Segments are defined in Purple.
0:00:00
2:00:00
1:40:00
Keys
Function
Note
Select
OSD
Mark the Segment
Define Your Segments
Toggles between:
progress bar > help text > title info >
no info
All segments must be entered correctly
(i.e. there is a segment end for each
segment beginning). Otherwise the result
will not be saved.
Clear
Clear all Start/ End point
Navigate within the title
Back to the title list
Play, FF, FR etc.
Stop
Do not save the result
Note: Segment mode can only be accessed if the title you want to edit is not protected or locked.
Note: Accuracy of segment boundaries is within 0.5 second.
is option allows you to change the Index Picture displayed for the title in the title screen. You can navigate the program (similar to
Playback mode) and when the desired picture is display on the screen press SELECT to change the Index picture.
Change Index Picture
0:00:00
2:00:00
0:40:00
Note: is operation is available only if the title is not protected or locked
22
Download from Www.Somanuals.com. All Manuals Search And Download.
RENAME
is option brings up the on-screen keyboard,. Here, you can enter a title name. Use the ARROWs to highlight the desired key, and use
SELECT to enter that key. When you have entered the title name, select OK to finish.
Title name:
TITLE
A
L
B
C
N
Y
D
O
Z
E
P
(
F
G
R
-
H
S
:
I
T
?
J
K
V
6
0
3
1
4
8
2
5
Q
)
M
X
U
.
W
7
9
Space
Aa
Backspace
Clear
Exit
OK
Note: is operation is allowed only if the title is not protected or locked.
LOCK
Programs can be “locked” with a parental password. To do so:
Highlight the program on the HDD title list, bring up the Popup menu by pressing the Right Arrow. Make sure Lock is highlighted (use
Up and Down arrows to navigate if needed) and press Select. When you lock a program, the parental password selected in the Setup
menu will be applied (default value is 3308).
e user will then need to unlock the program before Playback or any Editing function. To unlock a program, highlight a program on the
HDD title list, bring up the Popup menu by pressing the Right Arrow. Highlight unlock (use Up and Down arrows to navigate if needed)
and press Select. You will be requested to enter the password. A locked title will have a Lock icon next to its index picture on the HDD
PROTECT
Protect is a feature to safeguard against accidental erasure or editing that allows for playback only and no editing.
To protect a title, highlight the program on the HDD title list, bring up the Popup menu by pressing the Right Arrow.
Highlight ‘Protect’ (use Up and Down arrows to navigate if needed) and press Select. When you Protect a program, the user can Play the
title or Dub it to DVD, but can not perform any edit operations (split, segment, change index picture and delete).
In order to Unprotect, highlight the program on the HDD title list and bring up the Popup menu by pressing the Right Arrow.
Highlight Unprotect (use Up and Down arrows to navigate if needed) and press Select. A Protected title will
have a Safe Box icon next to its index picture on HDD title list.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operation
Introduction
DVD disc operations include browsing disc information, finalising a disc, removing disc content, deleting the last title, setting
compatibility and write protection, etc.
Menu Description
PAL
Play
1. Play: Play the content of the current disc.
DVD
Rename Disc
2. Rename Disc: Rename the disc (default name: MY DVD).
3. Erase Optical Disc: All content in the disc will be removed completely.
e disc index will appear as blank on the screen (only for DVD R/RW).
a new title: Add a new title to record.
5. Overwrite Disc: An operation on a recorded DVD RW disc to overwrite
its previous content.
EDIT
Erase Optical Disc
Record a New Title
Overwrite Disc
Lock Disc
is function prevents the deletion of recorded content.
Edit Disc (DVD)
To enter Disc operation mode, press UP in the disc title menu. Press RIGHT
to enter edit mode (provided the disc is not finalised).
PAL
Play
PLAY
DVD
EDIT
Rename Disc
is item is selected to play the disc.
Record a New Title
Finalize Disc
Press SELECT to rename the disc.
Record new title.
FINALISE DISC DVD R/DVDRW
Remember, until a DVD R/DVD-RW disc is finalised, it can be recorded to,
played back and edited on the DVD recorder, but it will not be compatible
with any other DVD player, finalisation makes the disc compatible for
playback on standard DVD players. Once a disc is finalised, no more recordings can be added.
Remark for Finalisation: It will take some time for finalisation, please wait.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Title Editing
Enter the Title Editing Mode
In the DVD Title Display mode, press the RIGHT ARROW to pop up the following dialog box.
1
2
3
4
5
1
2
3
4
1. Play Title: Play the current title.
Title: Enter the Title Editing mode, similar to the Chapter Editing mode.
Title: e operation is the same as that for Rename Disc.
4. Erase Delete the current title.
5. Overwrite Title:
6. Overwrite Overwrite Disc Operation.
Note:
DVD Play Mode
Enter the Play Mode
Press the DVD button on the remote control to switch to DVD mode.
In the DVD Mode, the unit serves as a high quality DVD player. To enter the Play Mode, do as follows.
■
■
Turn on the TV and switch to AV input status.
If the unit is working with other inputs, press the PLAY button to enter the Play Mode.
Note: If you insert a disc, the DVDRX160 will start playback automatically.
Note: If there is no disc in the drive or an unsupported or seriously damaged disc is inserted, the PLAY button will not function.
Menu Description
Note: Press the DISPLAY button to show or hide the control bar menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Display (OSD)
While playing DVD, press OSD for menu.
e mode option adjusts the playback modes. e options are: Normal, A-B Repeat, Chapter Repeat, Title Repeat, Program
2. TRICK: e Trick option gives you your transport options: Play, Prestop, Stop, Pause, Step, Fast Forward x2, Fast Forward x4, Fast
Forward x16, Fast Forward x32, Fast Rewind x2, Fast Rewind x4, Fast Rewind x16, Fast Rewind x32, Slow Forward ½, Slow Forward ¼,
Slow Forward 1/8, Slow Rewind ½, Slow Rewind ¼, Slow Rewind 1/8.
Option to skip available titles.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Chapter: Option to skip available chapters.
5. AUDIO: Adjust to desired audio setting.
Note: For options such as Dolby Digital, a compatible audio system must be used).
6. SUBTITLE: Select desired subtitle language (supported by the disc).
7. ANGLE: Select your desired camera angle, if available on disc.
Allows you to skip to any point in the title.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
e GOTO Button
e GOTO feature allows you to jump easily to any point on the disc. With GOTO, you can make jumps of time, chapters, and titles. Just
cycle through the different steps with the GOTO button and use the number buttons to enter the plact you want to skip to.
■
e following is an example of a DVD playing. e operation of a VCD playback is similar to this case.
Note: For Audio CDs, the GOTO function will not work.
USB Playback
To play files from a USB device;
■
Insert the USB device into the USB drive and the DVDRX160
will automatically detect it and will display the “USB” symbol
while loading in the lower right corner of your TV screen.
Press the “USB” button on your remote to switch to USB
Playback mode.
e unit will automatically identify the files on the USB drive.
Your DVDRX160 is able to playback the following file formats
off of a USB drive: .MP3 audio and .JPG images.
■
■
■
■
▼ and SELECT buttons to select an item to
play.
Press the and ▼ and ADD/CLEAR buttons to select the
program play mode.
Note: In the program play mode, audio files such as .MP3 and
picture files such as .JPG cannot be programmed at the same time. at is, if the program includes audio files, the picture files can
not be programmed.
■
When playback is finished, you can safely remove the USB drive from your DVDRX160.
Note: Do not unplu your USB drive while it is playing!
HDD Play Mode
HDD Playback
Press the HDD/DUB button to switch to HDD Playback.
During HDD playback, the following remote control keys are valid:
ZOOM
e zoom feature allows you to enlarge an image that is currently displayed on the screen and pan through to specific areas on the
zoomed image. ere are two zoom levels available (150% + 200%) which will be indicated on the screen.
During pause, press the ZOOM button to zoom the image on the screen to 150%.
Use the ARROW buttons to pan (select the part of the image you want to zoom in on)
Press the ZOOM button again to zoom the image on the screen to 200%.
Press the ZOOM button again to return the image on the screen to normal.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Shift
Timeshift allows you to pause and rewind live television. e unit continuously records an hour “buffer,” which can be rewound or
paused without missing any of the program.
■
■
■
Timeshift only works in TV mode.
Timeshifting begins recording only when the unit is switched on.
If the unit is paused for 60 minutes, it will automatically resume TV viewing.
Remote Control
On-Screen Display
OSD (pressed once)
Timeshifting buffer information, Channel/ Source information,
Dubbing Indicator (if dubbing is on-going) - see above diagram
OSD (pressed twice)
Hot keys and navigation information
Removes all On-Screen Display
OSD (pressed three times)
Press PLAY/PAUSE button to pause, press PLAY/PAUSE once again to resume to play.
2. Slow Playback:
Press SLOW/SORT button for slow motion.
Slow motion is not available in LIVE TV viewing.
Reverse:
Press PREV button to skip back for 5 minutes. Press the LEFT button to fast reverse 10 seconds; Press REV button repeatedly to fast
reverse for 1X, 2X, 3X to NORMAL speed.
Note: e Fast Reverse function is only available for the programs stored in the timeshift buffer memory of the Hard Disc.
4. Fast Forward:
Press NEXT button to fast forward 5 minutes. Press the RIGHT button to fast forward 30 seconds. Press FWD button repeatedly to
fast forward for 1X, 2X, 3X to NORMAL speed.
Note: e Fast Forward function only works in the pre-recorded buffer, you cannot fast forward LIVE TV.
5. Recording:
Note: Because the programs are stored in buffer memory of the Hard Disc in TIMESHIFT, the programs can only be recorded to the
Hard Disc not DVD.
6. Quit:
Press DVD button to quit TIMESHIFT mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
When your DVDRX160 is turned on, the system will start in Tuner
mode. e timeshift buffer will start recording. If the timeshift buffer
mode is set to refresh (See System Setup) and you change channels,
the timeshift buffer will be lost. No message will be provided prior to
doing so. However if the timeshift buffer is set to “PRESERVE” the time
shifting buffer will be maintained.
Note: If you change the input source and the video standard is different
(NTSC vs PAL), the timeshifting buffer will be erased.
During timeshifting, a Timer recording (pre-programmed recording)
may come up. As you can not watch one program in Timeshifting and
record another channel, the DVDRX160 will ask you to confirm if you
want to keep the current channel or proceed with Timer recording. If
there is no response, the unit will assume Timer recording should start.
e message will appear 2 minutes before the timer recording is due.
SAVE
In order to save part or all of the timeshifting buffer, two options are available:
1. Save Option 1
While viewing a program using timeshift, press REC, this will mark the start of the segment to be recorded.
You can navigate forward and back using the “transport” keys. By pressing REC, you will increase the length of the program you are
saving by 30 minutes, up to a mmaximum of 3 hours. Press stop to indicate the end of the segment to record. e save part of the
timeshifting buffer will be tagged in RED.
2. Save Option 2
While viewing a program, press Rec and hold down for 3 seconds. is will save the entire Time shifting buffer. If Stop is pressed, the
save will terminate at that point in the buffer. Press Stop and hold for 3 seconds if you want to cancel the save operation.
Note: You cannot change the channel or source while in the process of saving (the end of the recording segment is either not
entered, or in case of a long recording, it has not been reached). Saving has to be manually stopped first (by pressing STOP ). e
segment will be Saved on HDD and then channel or source change can be performed.
Note: Only one segment in the Time shifting buffer can be identified for Saving. It is not possible to identify multiple segments.
Once the segment has been Saved and registered on the Title list, this segment will be removed from the Time shifting buffer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
While in Timeshifting mode, you can use the following keys for other operations:
Key
Function
Note
Play Disc
Recording Continues
recording continues unless you want to
record to DVD
File/USB
USB Mode
To play slideshow from USB drive or copy
from USB to DVD - Recording Continues
OSD
Display Information List
Open/ Close the disc tray
Recording Continues
Recording Continues
Recording Stops
OPEN/CLOSE
STAND-BY
SETUP
Bring up the Set Up Menu
Bring up the Timer Menu
Recording Continues
Recording Continues
PSCAN
Change the Video Output mode to Recording Stops
Interlaced/ Progressive Scan
Note: Timeshift Recording will not record from DV!
31
Download from Www.Somanuals.com. All Manuals Search And Download.
System Set Up
Operation Interface and General Steps
is section will introduce the menu interface of the System Setup and general operation.
1. Press the SETUP button to enter the System Setup mode. Now the system setup menu will appear on the top of the OSD, as shown
in the following chart.
2. Use the ▲ or ▼ buttons to select submenus in the control bar and press the SELECT button to enter. In the submenu, press the
arrow buttons and SELECT to navigate the menu.
3. Press the RETURN button to return to the upper level menu. Press the SETUP button to exit the System setup mode
Note: System setup is best used with no disc in the drive. Otherwise some settings may become unaccessible.
Auto Chapter Marker
1. In the Recording Settings menu, use the arrow buttons to select Automatic Chapter Marker, and press the SELECT button to drop
2. Use the ▲ or ▼ buttons to select a value to insert chapter markers at 5min, 10min, 20min or 30min intervals during recording and
press the SELECT button to confirm. You can also turn off chapter markers.
3. Press the RETURN button to return to the upper level menu and set up other options.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Record Quality
1. In the Recording Settings menu, use the ▲ ▼ buttons to select the Default Quality of recordings and press the SELECT button
to drop down a menu.
2. Use the ▲ or ▼ buttons to select a desired value and press the SELECT button.
3. Press the RETURN button to return to the upper level menu and set up other options.
Note: For the differences of the six quality levels; HQ, SP, SP+, LP, EP, and SLP, see RECORDING MODES for reference.
1
APS (Auto Program Scan)
Your DVDRX160 has a built-in TV tuner. You can receive TV signals directly from the unit, but first, you must conduct a channel scan
to tune in various channels automatically and determine their frequencies. e tuned channels will be saved automatically. Even if the
power is off, the saved channel information will not be lost. Press the SETUP button to enter the System Setup mode.
Use ▲ or ▼ buttons, highlight APS, select it, and the following menu will be displayed.
■
■
Select the OK button, then the tuner will start searching through various channel frequencies and add available channels to the
system memory. is procedure may take several minutes.
When the scan is complete ‘TOTAL CHANNELS FOUND’ will appear on the screen with the number of channels that have been
stored to memory. Press the SETUP button on the remote control to exit.
Modify Channel
33
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to edit the channels stored, select ‘Modify Channel then press SELECT button to confirm,. In the channel edit dailog box, use
the or ▼ button and the SELECT button to select and confirm. e options are as follow :
■
■
Program Number! Current TV program number
Name: You can edit the program name displayed on screen using the or ▼ button to change the letter and SELECT button. Press
the or ▼ button to move the cursor.
■
■
Sound Mode: Use the or ▼ and SELECT buttons to select the local sound mode. ( In Australia use PAL B/G)
Search type: You can change the scan mode used during scanning. Frequency scans all frequencies in a manual scan; Channel: scans
by preset allocated channel in a manual scan.
■
■
Frequency: 551.3 MHz. When the search type is set to Channl, this item will be shown as the channel. Press the ◄ or ► button to
scan channels manually channel by channel.
Channel: CH006. When the serach type is set to ‘Channel’, this item will be shown as the channel. Press the ◄ or ► button to scann
channels manually by channel.
■
■
Fine Tuning: Use the or ▼ and SELECT buttons to select this item and press the or ▼ button to tune the frequency lightly.
Delete: Press OK delete current program
After the channel to information is modified, select OK and press the SELECT button to confirm. en return to the Channel Scan
menu.
Program Table
If you want to sort the order of various channels: select the Sort-option
in program table and operate as follows.
• In the dialog box box, press the ▲ ▼
to be changed.
• Use ► arrow button to access the right dialog box then press SELECT to confirm.
• Press the ▲ ▼ button to move this channel to the desired location.
• Press the SELECT button to insert the channel. e original channel
• Repeat as necessary when finished.
NOTE: Be sure to connect the antenna properly before the channel scan operation. Please see the Basic Information: System Connection
for Recording External Signals for reference.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Menu - Video
TV TYPE
e unit supports two different television systems. NTSC is the
television system that is adopted in the North American region.
PAL is the television system this is adopted typically in the rest of
the world especially in Europe, and Australasia.
1
1. In the General Setting menu, select the TV Type item and
press the SELECT button to drop down menu.
2. Select
3. Press the SELECT button to confirm. Check your TV system
first otherwise you may lose picture from the unit.
TV DISPLAY
1. Users are able to adjust the TV aspect ratio.
2. Use the UP and DOWN button to select a option. e
options are: 16:WS suitable for wide screen TV. 4:3PS
(pan+scan) is suitable for a standard TV with ordinary ratio
(4:3).
When wide screen pictures are played, the left and right
margin will be cut and the picture will occupy the entire
screen.
4:3 LB (Letterbox) for ordinary TV. When a wide screen
picture is played, a black frame will appear at the top and
bottom of the TV screen.
1
3. Press the RETURN button to return to the upper level menu
and set up other items.
NOTE:
■
e playing effect depends on the recorded picture size.
Some picture might not be played under the screen format
you select.
1
■
For those discs recorded as 4:3, no matter how the screen
format is set, the screen format played is always 4:3.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO OUTPUT FORMAT
1. In the General Setting menu, use the ▲ ▼ button to
move the cursor, select the Video Output Format item and
press the SELECT button.
2. Select the Progressive or Interlace option for video scan
output mode, and press the SELECT button to confirm.
is function can do by pressing PSCAN button on the
remote controller.
Only use progressive with a compatible TV. Failure to do so
will cause loss of picture. ( If this happens, press ‘PSCAN’)
If unsure consult your TV manual.
Set Up Menu - Audio
DOWN MIX
e unit can set the analog audio inputer output at 2-CH or 5.1-CH
stereo surround.
■
Enter the play setting menu, use the ▲ or ▼ button to select
downmix, and press the SELECT button.
Use the ▲ or ▼ button to select 2-CH or 5.1-CH, and press the
SELECT button to confirm.
NOTE: Only use 5.1 ch if you hav connect to a surround amp via
analog cables.
S/PDIF OUTPUT
is unit has digital audio outputs. You can enjoy better qulity
audio through an appropriate amplifier with a digital audio
decoder. (such as DOLBY DIGITAL or DTS by connecting a digital cable. Optical or digital coax.
1. Enter the play settings menu, use the ▲ or ▼ button to select SPDIF Output item, and press the SELECT button to drop down a
menu.
2. Use the arrow buttons to select an option (RAW, LPCM), and press the SELECT button.
3. Press the RETURN button to return to the upper level menu and set up other items.
Refer to your amplifiers manual for information on what digital format your amp requires.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
LPCM OUTPUT
e unit can set LPCM96K and LPCM 48K as the audio sampling frequency.
NOTE: See your amplifier manual if unsure.
Set Up Menu - Language
SYSTEM LANGUAGE
To satisfy the needs of consumers in different countries, the unit
provides various menu language settings.
1. Enter the system setup mode.
2. In the System Setup control bar menu, use the ▲ or ▼
button to move the cursor, select the Language item, and
press the SELECT button to enter the Language Settings
menu, which contains four items, as shown in the chart.
3. In the Language Setting menu, use the ▲ or ▼ button to
select the Language option and press the SELECT button to
drop down a menu.
Note: Adjusting the system language changes the language used
in all the menus. Careful! Do not set to languages you cannot
understand.
AUDIO LANGUAGE
Use the or ▼ button to select the language you want and
press the Select button.
If you play DVD disc supporting the selected language, the system
will adopt that language as the DVD audio language.
If the disc doesn’t support the selected language, the system will
adopt the language provided by disc.
SUBTITLE LANGUAGE
Some DVD discs may contain various subtitle languages. Adjusting
this will determine the default subtitle language.
Use the or ▼ button to select the language you want and
press the SELECT button
■
■
Off means no subtitle output.
e system will give priority to this setting as the DVD subtitle language. If the DVD played does not support the selected language
the DVD default will be displayed.
■
You can change the subtitle language at any time during playback by pressing the subtitle button on the remote.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC MENU LANGUAGE
Use the ▲ ▼ button to select the language you want and
press the SELECT button.
■
e system will give priority to this setting as the DVD menu
language. If the DVD played does not support the selected
language, the setting will be invalid.
■
■
You can change the disc menu language at any time during
playing. See Play Mode for details.
Press the RETURN button to return to the upper level menu
and set up other items.
NOTE: Any selections made here will override unit settings.
Setup Menu - Date/Time
DATE TIME SETTING
e time and date have to be set before using timer record.
ere are two ways to set the product clock: AUTO setting and
MANUAL setting.
Press the SETUP button on the remote control to display the
SYSTEM SETUP MENU. Use the CURSOR buttons to highlight
Date-Time Setting bar and press the SELECT button. Use the ▲
or ▼ buttons on the remote control to move the highlighted bar
to Date-Time setting and press SELECT button to select Auto or
Manual.
Auto:
If a Public Broadcasting Station (ABC channel in Australia) is available in your area, the clock will set itself automatically by tuning to this
channel.
If the clock does not automatically set itself, the clock will need to be manual set.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM
If you select Auto in the Date-Time setting optical bar, you must
select a Public Broadcasting Station (PBS channel in USA) which
is available in your area, the clock will set itself automatically by
tuning to this channel
DATE DD/MM/YYYY
Use the CURSOR buttons of the remote control to select the
Date (dd/mm/yyyy) and press the SELECT button to confirm.
Enter the correct date in dd/mm/yyyy format (Day/month/Year)
using the 0...9 keys.
TIMEHH/MM
Use the CURSOR button of the remote control to select TIME
and press SELECT to confirm. Enter the correct time in hh:mm format (Hour: Minute) using the 0...9 Keys.
After the date and time have been entered, press the SETUP buttong on the remote control to exit.
SETUP MENU - PREFERENCES
PARENTAL LEVEL
Setting authorisation level and password of the unit renders some
discs which contain restricted content playable only after the
password has been entered. is function enables you to restrict
play of discs which are not suitable for children.
1. In the Play Setting menu, use the or ▼ button to move
the cursorm select the Parental Level item, and press the SELECT
button.
2. Using 0...9 keys enter the password and press the SELECT button.
e TV screen will display the dialog box as shown in the right
charts. e standard password is 3308.
3. Select the Parental Level list box, and press the SELECT button
to drop down a menu as shown in the right chart.
4. Use the or button to select an authorization level (Off, 8:
Adult...Safe) and press the SELECT button to confirm.
5. When finished, use arrow buttons to select OK and press the SELECT button.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGE PASSWORD
1. Tt modify a password, use arrow button to Change password.
Press the SELECT button and a dialog box will pop up as shown in
the right chart.
2. Use arrow buttons to select the ‘Enter password here’ box and
enter the password with number buttons.
3. Use arrow buttons to select the ‘Input new password’ box, input
the new password with the number buttons en input the new
password again with the number buttons in the ‘Input new again’
4. Use the arrow buttons to select the OK button. After setting the
authorisation level, each time the unit plays a disc of that level, a
password is required. If you forget the password, you can enter the
default password.
1. In the General Settings menu, use the ▲ or ▼ button to select
the Reset to Factory Default item and press the SELECT button.
e OSD will display as follows.
2. Use the ▲ or ▼ button to select OK.
3. Press the SELECT button to restore all default settings.
NOTE: If your unit suddenly doesn’t work properly, it is possibly
due to incorrect settings. Please try the Reset to Factory Default
function to see if the unit restores to its normal working status.
SCREEN SAVER
When the unit is idle (or without monitored output) for some
time, interesting pictures will appear automatically as a screen
saver.
1. In the General Settings menu, use the ▲ or ▼ button to move the cursor and select Screen Saver.
2. Press the SELECT button and the Screen Saver item will drop down a list as shown in the chart.
3. Use the ▲ or ▼ button to move the cursor, and select ON or OFF.
4. Press the RETURN button to return to the upper level menu and set up other items.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Information
SETUP MENU - Time shift
HARD DISK INFO
Shows the information on HDD size
SPACE MANAGEMENT
Automatic: When Space Management is ‘Automatic’ and the HDD
is full, the system will overwrite unprotected titles in a FIFO (First
In First Out) scheme ( the exception is when the title is selected
to be dubbed - in which case, the case, the title shall be kept until
dubbing is over)
When Space Management is set to ‘Manual’ and the HDD is full
System displays ‘ e hard disk drive is full. Please erase some
programs to perform further recording’
Erase all programs on HDD. A message will be shown: ‘All video
programs on the hard disk drive will be lost. e system must be
restarted continue?’
Erase all programs on an optical disc. A message will be shown: All
video programs on the optical disc will be lost. Continue? OK. No
(default)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix (Troubleshooting Guide)
Before contacting service personnel, please check possible causes according to the following instruction.
Symptom
No Power
Remedy
1. Connect to the power supply.
1. Power Supply disconnected;
2. e power of the socket is switched off.
2. Try again or replace the socket with a new one.
3. Switch on the wall switch
No Sound
No Picture
1. Incorrect cable connection.
2. e disc is deformed or dirty;
3. e system is in cable mute status
1. Connect the cable properly.
2. Clean or fix the disc.
3. Press the mute button.
1. Incorrect cable connection.
2. Incorrect TV mode
3. Unit video-out mode is Progressive but your TV
system accepts interlace only
1. Connect the cable properly.
2. Adjust the TV/AV mode (see TV instructions)
3. Press PSCAN to change the mode.
No Colour
1. Selection of TV system;
2. Improper colour adjustment;
3. Incorrect video output settings.
1. Change the system by pressing the System button on the remote
controller.
2. Readjust the colour. (See TV instructions)
3. Check if the video output settings are correct.
Disc can’t be played
2. Disc placed incorrectly
1. Insert a disc.
2. Put the disc on the tray properly
3. Leave the unit on for about an hour (without disc) before using it
again.
4. Press the play button to switch to play mode.
5. Replace it with a supported disc.
6. Clean the disc with a soft cloth from the centre to the edge.
3. Moisture has condensed in the unit.
4. Not in play mode.
5. Wrong disc format.
6. Disc is dirty.
Remote Controller
malfunction
1. e remote controller is not directed at the sensor; 1. Direct the remote controller at the sensor.
2. e distance to receiver is more than 8 metres;
3. Low voltage of the RC batteries;
2. Reduce the distance.
3. Replace all the batteries.
4. Remove the obstacle
Sudden malfunction 1. Bad disc quality;
2. Press other buttons by mistake;
3. Static from the outside.
1. Wait for 5-10 seconds and the playing will be restored.
2. Operate again.
3. Shut off the unit for 1-2 minutes and turn on again.
Picture dividing
1. e selected system is incompatible with the disc ; 1. Set up the correct system (interlaced vs progressive)
External signal can’t 1. Incorrect system connection.
1. Connect properly.
2. Insert a recordable disc.
3. Change a disc.
be recorded
2. No disc or non-recordable disc;
3. e disc has been finalised.
4. ere is no free space in the disc.
4. Change a disc.
No monitoring
signal
1. Input source incorrect.
1. Select the input source.
2. Switch the video output system.
3. Select a proper input source.
4. When input AV or S-video and there is sound but not picture,
please confirm PSCAN mode.
2. Wrong video output system.
3. e actual input source is not consistent with the
selected one.
Timer recording
can’t be done
1. e disc does not meet the requirements.
2. Wrong time settings (System Clock or Recording
Time;
1. Replace it with a new DVD R or DVD RW disc.
2. Set up the time again.
3. Reset the system.
Recording aborted
halfway
1. ere is no free space on the disc.
2. Bad disc quality.
1. Replace it with a blank disc
2. Replace it with a high quality disc.
Only display HELLO 1. Signal connection between the decoder board and 1. Follow warranty instructions
on VFD
HDD is loose.
2. HDD is damaged.
Some DIVX discs
can’t be read
1. Reads for a long time
is player is only compatible with standard MPEG4 discs including
those with format of SMI, SRT, SSA, SUB, TXT, etc. And is not
compatible with those discs, which are labelled as MPEG4 but
actually are in format of Real video or the other proprietary format.
( for example, rm/ ra/ ram/ wmc/ ast, etc) and such discs can only be
played on computer with special software.
2. Can be read, but can’t be played
3. Can be viewed, but with image defects or
disordered subtitle.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DISC TYPES SUPPORTED
AUDIO PERFORMANCE
DA Converter
24bit
16bit
DVD RW
SVCD
Playback, Recording
AD Converter
Playback
Recording
Playback
Playback
Playback
Playback
Playback
Playback
48 kHz Sampling
96 kHz Sampling
Audio CD
4Hz to 44kHz
4Hz to 20kHz
> 90dB
CD-Audio
CD-R/RW
MP3
Signal to Noise Ratio
Audio Dynamic Range
> 80dB
JPEG
< 0.001% (W.PEAK)
OUTPUT CONNECTIONS
RECORDING
Component Video Out
Media
DVD R, DVD RW
Y
0.7 0.14Vp -p (75 Ohm),
Negative Sync
Capacity
Pb/Pr
0.7 0.14Vp-p (75 Ohm)
Recording Time
TV Systems
Digital Compression
Recording Types
Approx. 6 hours
NTSC/ PAL
MPEG3, MPEG1
Live, Timer
S-Video Out
Mini DIN 4-Pin
(Y = 0.7 0.14 Vp-p C = 0.3
0.06 Vp-p 75 Ohm)
Composite Video Out
Coaxial Digital Out
One Pin Jack
1 0.2Vp-p (75 Ω)
Max Simultaneous
Timer Recordings
One Pin Jack
0.5V+0.1V/-0.2V (75 Ω)
Recording Features
Pause, Record, Auto-Insert Chapter,
Index Screen Navigator, Multi Record
Optical Digital Out
Analog Audio Out
Standard TOSLINK Connector
2.0+0.2/2.0-1.0 VRMS (47K Ω)
Editing Features
PLAYBACK
Erase Disc, Show Chapter, Edit Title
Name
INPUT CONNECTIONS
S-Video In
(FRONT)
Mini DIN 4-Pin (75 Ω)
MP3 & JPG Navigator
Fast Forward / Reverse to 32X
Composite Video In
(FRONT/ REAR)
Cinch, 1Vp-p (75 Ω)
1.8VRMS (47K Ω)
Slow Motion Playback
Repeat Playback ( Chapter / Disc & A-B)
Commercial Skip Function 150% or 200%
Stereo Audio In
(FRONT)
VIDEO PERFORMANCE
PHYSICAL
720x480 NTSC, 720x576
PAL in HQ Mode
Operating Conditions
Power Supply
0° C to 40° C
Video Outputs
Scanning
~110V-240V, 50/60HZ
9bit
Power Consumption
45W
Composite, S-Video, Component
Progressive Scan, Interlaced
650nm
55mmX430mmX250mm (HXWXL)
Weight
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment
Supported Media (DVD R)
MANUFACTURER ID
RICOH JPN
DVD - R
TDK
8x
RICOH JPN
Max Write
Speed: 8x
TDK
4x
RICOH JPN
DVD + R
8x
RICOH JPN
NOT RECOMMENDED
PRINCO
FUSION
4x
MANUFACTURER ID
PRINCO
YUDEN000
Op1
DVD - R
8x
Max Write
Speed: 8x
FUJIFILM
8x
R01
Supported Media (DVD RW)
RECOMMENDED
MEDIA
SPEED
MANUFACTURER ID
TDK502SAKUM3
4x
Speed: 8x
TDK
4x
W11
NOT RECOMMENDED
MANUFACTURER ID
IMATION
RISHENG
4x
Speed: 8x
2.4x
4x
OPTODISCW002
OPTODISC
DVD + R
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVDRX160
Download from Www.Somanuals.com. All Manuals Search And Download.
|