Whistler Radar Detector 1785 User Manual

1785 10/24/00 4:35 PM Page 1  
OWNER’S MANUAL  
1785  
LASER/RADAR DETECTOR  
THE WHISTLER GROUP  
CORPORATE HEADQUARTERS  
13016 N. Walton Blvd.  
Bentonville, AR 72712  
TEL (501) 273-6012 FX (501) 273-2927  
PRODUCT DEVELOPMENT CENTER  
25 Industrial Ave.  
Chelmsford, MA 01824  
TEL (978) 244-1400 FX (978) 244-1492  
CUSTOMER RETURN CENTER  
1201 N. Dixieland Rd.  
TM  
Rogers, AR 72756  
Consumer Relations Tel (800) 531-0004  
Email: info@whistlergroup.com  
P/N 1785MAN/2, © WHISTLER 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 5  
TABLE OF CONTENTS  
WHISTLER FEATURES  
2
Topic  
Page  
Whistler 1785  
Model Features Summary....................................................3 - 5  
Installation .............................................................................6 - 9  
• Mounting Guidelines  
• Dash/Visor/Windshield Mounting  
• Power Connection And Fuse Replacement  
• Compass Calibration Set-up  
10  
3
1
4
5
7
Operation.............................................................................10-17  
• Power On And Self-Test  
• Integrated Real Voice™  
• Feature Engaged Confirmation  
• Auto Level Adjustment  
8
• Compass Mode  
• Auto Quiet/Quiet Modes  
9
6
• City Mode  
• Dim/Dark Mode  
• Engaging/Disengaging VG-2 Detection  
• Stay Alert  
Whistlers ergonomic and user-friendly design provides a  
new level of operating convenience. Special features  
include:  
Option Select Mode  
Teach/Tutorial Mode  
Vehicle Battery Saver Mode  
Radar, Laser And VG-2 Alerts.............................................18-22  
1. Bracket Release Button – Provides quick and easy  
release of the mounting bracket.  
• Radar Alerts  
• Pulse Protection®  
• Safety Radar Audio/Visual Alerts  
Laser Audio/Visual Alerts  
2. Power Jack – Provides connection for the power cord.  
VG-2 Audio/Visual Alerts  
3. Speaker – Provides distinct audio and Real Voice™  
warnings for X, K, Ka band radar, safety radar, laser and  
VG-2.  
• Alert Priority  
• Reset Features  
• Care and Maintenance  
Troubleshooting Guide ............................................................23  
Are Detectors Legal? ...............................................................24  
Speed Monitoring Technologies .....................................25 - 26  
• Radar Facts  
4. Power/Dim/Dark Button – Turns unit on/off and  
engages Dim/Dark modes (press and hold for 2 seconds).  
Laser Facts  
5. Volume Up/Down Buttons – Adjust volume up or  
down. Pressing both buttons enter compass calibration  
mode.  
Other Speed Detection Systems  
• Radar Detector Detectors  
Warranty Information........................................................27 - 29  
Specifications............................................................................30  
Accessories ...............................................................................31  
Accessory Order Form.............................................................32  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 7  
WHISTLER FEATURES  
WHISTLER FEATURES  
6. High Visibility Display – Provides distinct visual confir-  
mation of signals detected, signal strength, and indicates  
engaged modes of operation.  
Accessories  
Accessories included are highly functional and easy to use.  
Power Cord - Connects to the units power jack and your  
7. Quiet/Menu Button - Pressing QUIET before a signal is  
detected engages Auto Quiet Mode which automatically  
reduces the audio level after the initial warning to a low  
audio level setting. Pressing QUIET during a radar/laser  
encounter silences audio alerts, while allowing visual alerts to  
keep you informed. Pressing and holding for 2 seconds  
allows you to enter Option Select Mode (see page 16).  
vehicles lighter socket.  
Windshield Bracket - Allows installation of unit on your  
vehicles windshield.  
Hook & Loop Fasteners - Designed to secure the unit on  
a level dashboard.  
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance  
of false alerts typically encountered in urban driving areas.  
9. Mode Button - Switches between Combo, Radar,  
Compass only modes. See page 11.  
10. Lase r Ante nna (Re ar) - An integrated optical  
waveguide provides superior detection of laser signals  
transmitted from behind.  
13  
12  
11  
11. Laser Antenna (Front) - High gain optical lens  
provides increased sensitivity and field of view for leading-  
edge laser detection.  
12. Radar Antenna - Compact, high-efficiency antenna  
receives radar signals.  
13. Mounting Bracket Location - Slot holds mounting  
bracket firmly.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 9  
INSTALLATION  
INSTALLATION  
Mounting Guidelines  
Mount the unit as low and level as possible near the center  
of the windshield. Unit must be level for compass to func-  
tion properly.  
Slide the detector onto the bracket until it locks into place.  
• If necessary, the unit may be leveled by bending the wind-  
Do not mount your unit behind wipers, ornaments, mirrored  
sunscreens, etc. These obstructions have metal surfaces which  
can affect radar and laser signals and reduce critical warning  
time. (Regular tinted glass does not affect reception.)  
Some windshields have an Instaclearor Electriclear™ type  
coating, which affect radar signals. Consult your dealer or the  
owners manual supplied with your vehicle to determine if your  
windshield has this coating.  
shield bracket. Press the bracket release button and remove  
the detector before bending.  
Avoid placing unit in direct contact with windshield.  
To reduce the possibility of theft, conceal your unit when not  
in use.  
Dash Mounting  
Make sure the mounting location you have chosen is  
relatively level and is clean and dry. Clean with isopropyl  
alcohol if necessary to remove any waxes or polishes.  
Separate the fastener strips. Peel the paper backing off  
each strip and adhere one piece to the dash and the other  
piece to the bottom of the unit, taking care not to cover  
the serial number.  
Windshield Mounting  
Install the two suction cups and rubber bumper onto the  
bracket by fitting them into their holes.  
Press the suction cups onto the windshield at the location  
you have chosen. IMPORTANT: Some newer cars have a  
plastic safety coating on the inside of the windshield. The  
suction cups may leave permanent marks on this type of  
surface. To find out if your vehicle has this type of wind-  
shield, check the owners manual or ask your dealer. We  
recommend that you do not leave the suction cup bracket  
on the window in direct sunlight. If the detector is  
removed, this may cause blistering of the dash in some  
vehicles.  
Be careful not to place the fastener strip over the units serial number. If the  
fastener strip is removed, the serial number may be pulled off the unit. Units  
without serial numbers are not covered under warranty.  
6
7
CAL MODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 11  
INSTALLATION  
INSTALLATION  
Visor Mounting (optional accessory)  
Compass Calibration Set-up  
• Slide the visor bracket into the bracket mounting slot.  
• Clip the visor bracket onto the visor making sure it is  
relatively level and has a clear view of the road.  
The unit will need to be calibrated in order for the com-  
pass to provide accurate readings. To calibrate the unit,  
perform the following procedure:  
1. Mount the unit level in the center of the vehicles wind-  
shield in which it will be used. Make sure there are no  
other magnetic sources near the detector (i.e., speaker).  
2. Select a large clear area (parking lot or field) without any  
power lines.  
Slide on view  
Insert into bracket mounting slot. Do not bend this  
section of bracket.  
Power Connection  
• Plug the small end of the power cord into the units power  
jack.  
3. While parked, press both volume buttons simultaneously  
until unit displays:  
• Plug the large end into the vehicles cigarette lighter.  
CAL MODE  
Fuse Replacement  
The lighter socket plug is equipped with a replaceable 2  
amp 3AG fuse located behind the silver tip. To replace the  
fuse, carefully unscrew the tip of the plug. (IMPORTANT:  
Unscrew slowly. The tip contains a spring which may fly out  
when disassembling.) Insert the new fuse with the spring and  
screw on the tip. With use, screw cap on plug may loosen.  
Retighten occasionally.  
4. Drive vehicle slowly in two complete circles. If  
calibration does not automatically finish press both volume  
buttons simultaneously to complete calibration. The unit  
will beep twice and display:  
CAL DONE  
°
NE 45  
Show Cardinal Points and Headings  
Note: If unit mounting is relocated in the vehicle, (i.e.,  
visor to windshield mounting or dash mounting), or if the  
unit is moved to another vehicle, you must recalibrate the  
compass.  
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp  
fuse.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 13  
OPERATION  
OPERATION  
Power On And Self-Test  
Memory/Beep Confirmation  
Each time your Whistler detector is turned on, an auto-  
matic self-test sequence confirms that the speaker and  
visual displays are functional.  
All features selected (except Stay Alert and Quiet) are  
retained in memory. Each time a button is pressed one  
beep confirms feature “on”, two beeps confirm feature  
“off”.  
• Press  
(Power) or apply Power. Display reads:  
Audio Level Adjustment  
The audio levels can be adjusted high to low, or low to  
high, in nine steps: (0) is no audio level, (8) the highest.  
WHISTLER  
X
9
9
9
• Press Volume  
up to increase audio level.  
K
• Press Volume down to decrease audio level.  
Ka  
As audio level is adjusted, beeps are provided and the  
display indicates volume level. Example:  
LASER  
SR ON  
VOL O  
VG2 OFF  
B SVR ON  
HIGHWAY  
COMBO  
No Audio Level  
8
VOL  
Highest Level 8  
Compass Mode  
The 1785 is programmed from the factory in “Combo  
Mode”. Combo mode means that the unit provides both  
compass readings as well as detecting laser/radar signals.  
Through the “Option Select Mode” (page 16) or the  
“Mode“ button, the unit can be changed to operate in  
Radar Mode (detection of all police bands and laser (no  
compass) or Compass Mode (no detection of police laser  
radar). Note: The unit must be calibrated to provide accu-  
rate compass readings. See Compass Calibration Set-up  
section on page 9.  
NE 45  
Integrated Real Voice  
When selected, Real Voice will be used to articulate the  
following:  
1. Band Identification  
2. Safety Warning System messages  
NOTE: In certain cases the voice message does not repli-  
cate the text message.  
3. Feature Selection  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 15  
OPERATION  
OPERATION  
City/City 1/City 2 Mode  
Auto Quiet Mode  
Whistlers Three Stage City Mode is designed to reduce the  
annoyance of automatic door openers, intrusion alarms and  
other devices which share frequencies with police radar.  
• Press City to engage City. Display reads:  
Auto Quiet reduces the selected audio level to level (1)  
approximately 5 seconds after a radar or safety radar sig-  
nal is detected. The alert for any new signal within 20 sec-  
onds will resume at level (1). Auto Quiet does not affect  
VG-2 or laser alerts.  
CITY  
• Press Quiet/Menu (before a signal is detected) to  
engage Auto Quiet. Display reads:  
• Pressing City a second time engages City 1. Display reads:  
CITY 1  
• Pressing City a third time engages City 2. Display reads:  
AUTO  
CITY 2  
QUIET  
• Pressing City a fourth time cancels City, City 1, and City 2.  
Display reads:  
Once the Auto Quiet mode is engaged, you may cancel  
the audio alarm by pressing Quiet.  
HIGHWAY  
• Press Quiet (when the unit is not alarming) to cancel  
Auto Quiet mode.  
In City Mode, weak speed/safety radar signals give an initial  
alarm of two beeps, and then remains quiet unless the signal  
becomes very strong. When the signal strength increases,  
two additional beeps are provided. In City 1 Mode, only the  
X band sensitivity is lowered. In City 2 Mode, X-band is not  
detected. CAUTION: When selecting this mode, some  
towns/small cities may still be using X band radar.  
Quiet Mode  
Quiet cancels audio during an alert and any new alert with-  
in 20 seconds. After 20 seconds, approximately 2 beeps  
are provided on any new alert and unit then remains quiet.  
• Press Quiet to cancel the audio.  
If Auto Quiet is engaged in City 1 or City 2 modes and the  
unit receives a strong radar signal, the unit performs the Auto  
Quiet feature. City Modes do not change the audio alert for  
laser or VG-2.  
• Press Quiet a second time during an alert to restore the  
standard audio alert pattern; or turn the unit off, then on.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 17  
OPERATION  
OPERATION  
Dim/Dark Mode  
Stay Alert Feature  
Dim/Dark Mode reduces the illumination of the display.  
The Stay Alert Feature is designed to test a drivers alert-  
ness. To engage (when unit is not alarming):  
• Press and hold  
(Power) for 2 seconds to reduce illumi-  
nation to a Dim setting. Display reads:  
• Press and hold City for approximately 2 seconds.  
Release the button during or immediately after the alert is  
given. Display reads:  
DIM  
• Pressing and holding  
engages Dark Mode. Display reads:  
for 2 seconds a second time  
RUALERT  
Within 30-60 seconds two beeps are sounded; to show alert-  
ness, the driver must press either the  
(Quiet) button within 3-5 seconds. If the button is pressed  
within 3-5 seconds, the cycle is repeated.  
(Volume), City or  
DARK  
Dim or dark can be engaged during an alert. In Dark Mode,  
the display goes dark for as long as a signal is being detect-  
ed and for 20 seconds after, then the display returns to the  
dimmer setting.  
If a button was not pressed within 3-5 seconds alarm sounds  
and the display reads:  
GETREST  
• Pressing and holding  
tion to the display.  
a third time restores full illumina-  
• Press  
(Power) to exit.  
WARNING!!! Stay Alert is NOT intended as a substitute for  
adequate rest. You should NOT operate a vehicle if you are  
drowsy. During extended periods of vehicle operation, you  
should take frequent breaks. Improper reliance on the Stay  
Alert feature may result in vehicle damage, personal injury or  
death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.  
Engaging/Disengaging VG-2  
See Option Select Mode to turn this feature on.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 19  
OPERATION  
OPERATION  
Teach/Tutorial Mode  
Provides simulated alerts for each type of signal.  
Option Select Mode  
Entering Option Select Mode allows you to customize  
options such as Tone Select, Compass Select, Abbreviated  
Power Up Sequence and VG-2 Mode. When selecting  
• Press City and  
Display reads:  
(Quiet) simultaneously and release.  
TEACH  
options, the  
,
or must be pressed within 20 seconds  
Quiet mode can also be accessed while Teach/Tutorial mode  
is engaged.  
or options mode will automatically be exited. To enter:  
Press  
:
*Display  
COMBO  
To Change,  
Reads:  
Option:  
Press  
• Press  
(Power/Play) to exit.  
(Quiet)  
For 2 seconds  
2nd time  
or  
Combo=Radar & Compass  
Radar=No Compass  
Compass=No Radar  
Vehicle Battery Saver Mode  
The Vehicle Battery Saver Mode automatically shuts off your  
detector within 3 hours if you forget to turn it off. The timer  
is reset if the detector is turned off, unplugged or any button  
is pressed before the 3 hours have expired. The detector will  
alert you with an audible and visual warning before it shuts  
off. Display reads:  
TONE 3  
= YES  
= NO  
Tone 1, 2, or 3  
(3 different X, K, Ka  
patterns)  
3rd time  
TEST YES  
VG2 OFF  
= ON  
= OFF  
X, K, Ka Audio tones  
1 beep during  
Power Up  
PWR OFF  
4th time  
5th time  
6th time  
= ON  
= OFF  
Turns VG-2 On  
Turns VG-2 Off  
During this warning you can momentarily reset the unit by  
pressing any button. This will reset the timer.  
SAFETY  
ON  
= ON  
Turns Safety Radar On  
= OFF  
= ON  
Turns Safety Radar Off  
Real Voice engaged  
If the unit has automatically turned itself off, press the  
(Power/Play) button to turn the unit back on. You can man-  
ually start the Vehicle Battery Saver Mode by pressing and  
holding the City button until one beep is heard. The Auto  
Shut Off Function will initiate after several seconds.  
VOICE  
ON  
= OFF  
Real Voice disengaged  
7th time  
B SVR  
ON  
= ON  
= OFF  
Battery Saver On  
Battery Saver Off  
Refer to “Option Select Mode” for instructions for deactivat-  
ing battery saver mode feature.  
*Factory settings.  
Press  
anytime to exit.  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 21  
RADAR ALERTS  
SAFETY RADAR ALERTS  
Speed Radar Audio/Visual Alerts  
In communities where transmitters are located, the Safety  
Warning System displays over 60 text messages. When  
Safety Radar is detected the audio alert is geiger counter-  
like.  
When X, K or Ka is detected the band ID and signal  
strength is displayed. The audio alert is continuous and  
has a geiger counter-like pattern. The faster the beep the  
closer or stronger the radar source. Example:  
Ka Band  
Detected  
Safety Warning System Text  
Example: Poor Road Surface:  
Display  
CAUTION  
POOR  
Digits  
ramp  
1-9  
Ka  
9
1 = weak signal, 9 = strong signal  
Pulse Protection®  
When a pulse type signal (instant on strong signal) is  
detected an urgent 3 second audio warning is sounded  
and the display reads:  
ROAD  
SURFACE  
PULSE  
After 3 seconds standard alert pattern continues.  
Note: Not all areas have Safety Warning System transmitters.  
Visit Safety Warning Systems web page at www.safetyradar.com  
for SWS locations.  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 23  
LASER/VG-2 ALERTS  
RESET FEATURES  
Reset Features  
Laser Audio/Visual Alerts  
All user features can be reset to factory settings.  
When a laser signal is detected the word Laser” and sig-  
nal strength is displayed, the audio alert is continuous for  
a minimum of 3 seconds. Example:  
• Unplug Power Cord from unit.  
• Press and hold  
• Plug Power Cord into unit.  
• Wait for 2 beeps.  
(Power) and  
(Quiet).  
LASER  
The more |||” the closer the laser source.  
• Release  
and . Unit is now reset.  
VG-2 Audio/Visual Alerts  
Note: You must turn this feature on in option select mode before  
it will detect VG-2.  
1. Audio to level (4).  
2. Display reads Highway.  
When a VG-2 signal is detected, the detector “hides” its own  
radiated signal and becomes undetectable by the VG-2.  
3. Dim/Dark Mode to full illumination of display.  
4. Auto Quiet Mode OFF.  
5. VG-2 Detection Mode OFF.  
6. Voice ON.  
VG2 VG2  
Text message confirms detection of VG-2.  
Every 30 seconds, the detector checks for a VG-2 signal. If  
a VG-2 signal is still detected, the unit continues to hide  
and repeats the VG-2 alert. If no signal is detected, two  
beeps are provided, indicating an “all clear” condition.  
During VG-2 Alert X, K, and Ka band signals cannot be  
received. (Reference page 26 for VG-2 information.)  
7. Combo ON.  
8. Safety ON.  
9. Vehicle Battery Saver ON.  
10. Full Power Up sequence.  
11. Default TONE 3.  
12. Unit ON or OFF.  
Alert Priority  
When two or more signals are received at the same time,  
NOTE: Must recalibrate compass after resetting detector.  
the alert priority is:  
1. Laser  
2. VG-2  
3. Speed Radar  
4. Safety Radar  
Example:  
If X band is alerting, then suddenly VG-2 is detected, the  
VG-2 warning will override the X band alert.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 25  
CARE & MAINTENANCE  
TROUBLESHOOTING GUIDE  
Your Whistler detector is expertly engineered and designed to  
exacting quality standards to provide you with reliable, trouble-  
free operation. If your unit has been correctly installed follow-  
ing the guidelines in this manual, but is not operating optimal-  
ly, please refer to the troubleshooting guide below.  
Care And Maintenance  
During the summer months, avoid prolonged exposure to  
direct sunlight by removing your unit from the dash when  
your vehicle is parked for an extended period of time.  
Do not spray water, cleaners or polishes directly onto the  
unit. The spray may penetrate through the openings and  
damage the unit. Also, do not use any abrasive cleaners on  
the units exterior.  
PROBLEM: No display or audio.  
Check fuse in Whistler plug; replace if necessary with a  
2 amp 3AG type.  
Check fuse for lighter socket; replace if necessary.  
Make sure lighter socket is clean.  
PROBLEM: Unit alarms when vehicle hits bumps.  
Check for loose lighter socket; tighten and clean.  
Check connections at both ends of power cord. Substitute  
another cord to determine if cord is defective. Return  
defective cord to the factory.  
PROBLEM: Unit alarms when using vehicle equipment, electrical  
accessories (brakes, power mirrors/windows, directionals, horn,  
etc.), or when accelerating.  
Vehicles electrical system, including battery and alternator,  
may have electrical noise. Install a filter capacitor (470mfd.  
25 volt or larger capacitance value) on the back of the  
lighter socket.  
PROBLEM: Audio alerts are not loud enough.  
Cancel Auto Quiet Mode or City Mode.  
Check audio level setting (see page 10 & 11).  
PROBLEM: No X band signals.  
Cancel City 2.  
PROBLEM: Unit gives laser alert when accelerating.  
Possible bad or low quality distributor cap. Replace with high qual-  
ity cap.  
If difficulties occur which cannot be solved by information in  
this Troubleshooting Guide, please call Whistler Consumer  
Relations at 1-800-531-0004 before returning your unit for serv-  
ice.  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 27  
ARE DETECTORS LEGAL?  
SPEED MONITORING TECHNOLOGIES  
In Most States YES!  
Radar Facts  
A radar gun operates by transmitting radio waves at certain  
frequencies which reflect off objects and are then picked up  
by the radar guns receiving section. When a radar beam  
reflects off a moving target, a measurable frequency shift  
occurs. The radar unit converts this shift into miles per hour  
to determine your vehicles speed.  
Currently, the FCC (Federal Communications Commission)  
permits operation of traffic radar guns at X Band (10.500 -  
10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band  
(33.400 - 36.000 GHz).  
Laser detectors are completely legal in every state when  
used in automobiles or light trucks (under 10,000 lbs.).  
Similarly, when used in automobiles or light trucks, radar  
detectors are legal in almost every state. Exceptions are  
Virginia and Washington, D.C., which have local regulations  
restricting the use of radar receivers in any vehicle.  
Concerning trucks over 10,000 lbs., the Federal Highway  
Administration (FHwA) issued  
a
regulation, effective  
January, 1994 which prohibits radar and laser detector use  
in these types of vehicles nationally.  
Prior to the FHwA regulation, laws existed in the state of  
New York restricting the use of radar detectors in trucks  
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.  
Laser Facts  
Its well documented that many radar guns cannot reliably  
provide the speed of a targeted vehicle that is traveling in a  
group of vehicles. In contrast, a laser gun can target a spe-  
cific vehicle out of a line of traffic and determine its speed.  
The advantage of laser over radar in terms of target identifi-  
cation is the result of the laser guns narrow beam. A radar  
transmission can cover more than a four-lane highway at a  
distance of 1,000 feet, compared with a laser transmission  
which covers about 6 feet at the same distance.  
For best protection, keep these points in mind:  
Because your vehicles license plate or headlights are the laser guns  
primary targets, mounting your Whistler detector on the dashboard can  
improve laser detection at short range.  
Do not follow closely behind any vehicle you cannot see through. If you  
cant see past a vehicle ahead of you, chances are your detector wont  
either.  
The receiving range of your laser detector will not be the same as a radar  
detector. Laser guns are most often used at short range.  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 29  
SPEED MONITORING TECHNOLOGIES  
WARRANTY INFORMATION  
Other Speed Detection Systems  
Consumer Warranty  
The 1785 Whistler detector is warranted to the original  
purchaser for a period of one year from the date of original  
purchase against all defects in materials and workmanship.  
This limited warranty is void if the unit is abused, modi-  
fied, installed improperly, if the housing has been  
removed, or if the serial number is missing. There are no  
express warranties covering this product other than those set  
forth in this warranty. All express or implied warranties for this  
product are limited to one year. Whistler is not liable for  
damages arising from the use, misuse, or operation of this  
product.  
Several techniques other than radar or laser are used to meas-  
ure vehicle speeds. When these methods are being used, no  
detector can provide a warning. These techniques include:  
• Pacing - A patrol car drives behind you and matches your  
driving speed.  
Vascar/Aircraft - The time it takes a vehicle to travel a  
known distance is measured.  
Radar Detector Detectors (VG-2)  
The Interceptor VG-2, or simply VG-2, is a microwave receiver  
used by police to detect signals radiated by the local oscilla-  
tor of a radar detector. Because its purpose is to identify per-  
sons driving with radar detectors, the VG-2 is known as a  
“radar detector detector”.  
The VG-2 is the primary tool used by the police to identify  
radar detector equipped vehicles. If caught, in a state where  
detectors are illegal, (see page 26), drivers risk losing their  
radar detector and receiving a fine. In addition, instant-on  
radar is almost always used in combination with a VG-2, leav-  
ing unsuspecting motorists vulnerable to receiving two tickets  
one potentially for speeding, the other for possession of a  
detector.  
Service Under Warranty  
During the warranty period, defective units will be repaired or  
replaced (with the same or a comparable model), at Whistlers  
option, without charge to the purchaser when returned pre-  
paid, with dated proof of purchase to the address below. Units  
returned without dated proof of purchase will be handled as  
described in section “Service Out Of Warranty.” Due to the  
specialized equipment necessary for testing a radar/laser  
receiver, there are no authorized service stations for Whistler  
brand detectors other than the factory.  
When returning a unit for service under warranty, please  
follow these instructions:  
1. Ship the unit in the original carton or in a suitable sturdy  
equivalent, fully insured, with return receipt requested, and  
shipping charges prepaid to:  
Having a radar detector capable of detecting the VG-2 may  
alert you to the presence of a speed trap.  
Whistler Repair Dept.  
1201 North Dixieland Rd.  
Rogers, AR 72756  
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 31  
WARRANTY INFORMATION  
WARRANTY INFORMATION  
Service Out Of Warranty  
Units will be repaired at “out of warranty” service rates  
when:  
IMPORTANT: Whistler will not assume responsibility for loss or  
damage incurred in shipping. Therefore, please ship your unit  
insured with return receipt requested.  
• The units original warranty has expired.  
• Dated proof of purchase is not supplied.  
2. Include with your unit the following information, clearly printed:  
Your name and street address (for shipping via UPS), and  
a daytime telephone number. (No P.O. Box please.)  
• A detailed description of the problem (e.g., “Unit per  
forms self-test but does not respond to radar”).  
• A copy of your dated proof of purchase or bill of sale.  
3. Be certain your unit is returned with its serial number. For  
reference, please write your units serial number in the following  
space: s/n __________________.  
• The unit has been returned without its serial number.  
• The unit has been abused, modified, installed improper-  
ly, or had its housing removed.  
The minimum out of warranty service fee for your Whistler  
detector is $55.00 (U.S.). If you require out of warranty serv-  
ice, please return your unit as outlined in the section  
“Service Under Warranty” along with a certified check or  
money order for $55.00. Payment may also be made by  
MasterCard or VISA; personal checks are not accepted. In  
the event repairs cannot be covered by the minimum  
$55.00 service fee, you will be contacted by a Whistler  
technical service specialist who will outline options avail-  
able to you. If you elect not to have your unit  
repaired/replaced, it will be returned to you along with  
your certified check or money order.  
Units without serial numbers are not covered under warranty.  
IMPORTANT: To validate that your unit is within the warranty  
period, make sure you keep a copy of your dated proof of  
purchase and return the Warranty Validation card.  
IMPORTANT: When returning your unit for service, be cer-  
tain to include a daytime telephone number.  
Consumer Relations  
If you have questions concerning the operation of your  
Whistler detector, or require service during or after the  
warranty period, please call Consumer Relations at  
1-800-531-0004. Representatives are available to answer  
your questions Monday - Friday from 8:00 a.m. to 5:00 p.m.  
(CST).  
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 33  
SPECIFICATIONS  
ACCESSORIES  
• Dimensions: 1.6"H x 2.9"W x 4.5"L  
• Weight: 7.5 oz.  
The following accessories can be ordered directly from  
Whistler by calling 1-800-531-0004, or by mailing in the  
form on page 32.  
Order  
Code  
Description  
Price  
Laser Wavelength:  
905 ± 50 nanometers (nm)  
202138  
202140  
206294  
Visor Bracket  
$ 6.95  
$ 9.95  
$ 7.95  
Windshield Bracket Kit  
*Modular Lighter Plug  
(Requires 206550 or  
206551)  
*Modular Straight  
Power Cord (5')  
• Radar Frequencies:  
10.500 - 10.550 GHz (X Band)  
24.050 - 24.250 GHz (K Band )  
33.400 - 36.000 GHz (Ka Superwideband)  
206550  
206551  
$ 6.95  
$ 7.95  
Operating Temperature Range:  
-20˚ C to +80˚ C (-4˚ F to +176˚ F)  
(Requires 206294)  
*Modular Coiled  
Power Cord (7')  
• Power Requirements:  
Operational 12 to 15 volts DC, 250mA nominal  
Vehicle Battery Saver, 70mA nominal.  
(Requires 206294)  
Straight Power Cord (5)  
Coiled Power Cord (7)  
Hook & Loop  
Hardwire Kit (10' )  
(for wiring to fuse box)  
206552  
206553  
206879  
206880  
$ 14.95  
$ 15.95  
$ 1.95  
$ 9.95  
• Compass:  
Accuracy to 5°, Resolution to 5°.  
*Modular: interconnecting pieces cord and plug.  
Shipping and handling (per order) $5.00  
One or more U.S. patents apply: #4,315,261; #5,146,227;  
#5,379,456; #5,666,120, and #5,990,821.  
Specifications are subject to change without notice.  
Prices are subject to change without notice.  
30  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1785 10/24/00 4:35 PM Page 35  
ACCESSORY ORDER FORM  
NOTES  
PLEASE SHIP TO:  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
___________________________________________________  
Name______________________________________________  
Street______________________________________________  
City________________________State_______Zip_________  
Telephone Number (______) __________________________  
Order Code/Description Quantity Total Price  
$
Subtotal  
Sales Tax (if Applicable)  
Shipping and Handling*  
Total Enclosed  
$
$
5.00  
SEND ORDER FORM WITH CERTIFIED CHECK OR  
MONEY ORDER TO:  
Whistler CTS  
PO Box 1844  
Bentonville, AR 72712  
IF PAYING BY MASTERCARD OR VISA PLEASE PROVIDE:  
Type of Card ___MasterCard ___Visa ___American Express  
Name on Card______________________________________  
Card Number_______________________________________  
Expiration Date_____________________________________  
Cardholder Signature________________________________  
*For expedited shipping costs, contact Whistler Customer Service, 1-800-531-0004  
33  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Wells Griddle WVG 136, WVG 136RW User Manual
Weslo Treadmill WCTL39110 User Manual
Whirlpool Dishwasher DP840SWSX0 User Manual
Whirlpool Washer Dryer LA5578XS User Manual
Xantech TV Mount CSPLCD39RMP User Manual
Xantrex Technology Portable Generator AGS User Manual
Xerox Printer 3320 DNI User Manual
Yamaha Boat 60D User Manual
Yamaha Car Amplifier DSP AX763 User Manual
Yamaha Video Game Controller 5HN 28199 13 User Manual