Gas Dryer
PRODUCT MODEL NUMBERS
WGD94HEX, WGD95HEX, WGD97HEX
Front view:
Side view:
27"
(686 mm)
381/8"
(968 mm)
* Approx. measurement
3
/4"*
(18 mm)
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
Back view:
61/4"
(159 mm)
Recommended installation clearances (dryer only):
3"
(76 mm)
18" min.
(457 mm)
48 in.2 min.
(310 cm2)
297/8"*
(759 mm)
Water
53/4"*
(146 mm)
31/2"*
(89 mm)
Vent
24 in.2 min.
(155 cm2)
Gas
5"
3"
(76 mm)
(127 mm)
61/8"*
(156 mm)
3/4"*
(18 mm)
143/8"
(365 mm)
253/4"
1"
(25 mm)
1"
(25 mm)
(654 mm)
Installation spacing for recessed area
or closet installation
All dimensions show recommended and minimum spacing allowed.
■
Additional spacing should be considered for ease of
installation and servicing.
■
■
Additional clearances might be required for wall, door, floor moldings, dryer venting, and gas line.
Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■
■
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered
doors with equivalent ventilitation openings are acceptable.
Companion appliance spacing should also be considered.
Download from Www.Somanuals.com. All Manuals Search And Download.
|