Westinghouse Flat Panel Television LVM 37w3se User Manual

USER’S MANUAL  
MANUEL DE LUTILISATEUR  
MANUAL DEL USUARIO  
LVM-37w3se  
1080p Monitor  
Moniteur 1080p  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1. PRODUCT SAFETY  
SAFETY GUIDELINES ........................................................................2  
PRODUCT SAFETY INSTRUCTIONS .....................................................3  
2. INSTALLATION  
PACKAGE CONTENTS........................................................................4  
FRONT VIEW OF THE 1080PMONITOR ................................................5  
REAR VIEW OF THE 1080P MONITOR .................................................5  
SIDE VIEW OF THE 1080P MONITOR ..................................................6  
REMOTE CONTROL...........................................................................7  
INSTALLATION ..................................................................................9  
3. OSD FUNCTION  
OSD FUNCTION.............................................................................12  
PICTURE .......................................................................................13  
PC PARAMETERS...........................................................................14  
AUDIO...........................................................................................15  
PICTURE-IN-PICTURE .....................................................................17  
GENERAL SETTINGS.......................................................................17  
4. APPENDIX  
TROUBLESHOOTING .......................................................................18  
CLEANING THE 1080P MONITOR......................................................20  
SPECIFICATIONS ............................................................................20  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
PRODUCT SAFETY  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
PRODUCT SAFETY  
Safety Guidelines  
WARNING: This device must be operated with the original power supply, part number FSP273-4F01.  
CAUTION: The power supply outlet should be located near the 1080p monitor and should be easily  
accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples  
are listed below:  
USA..................UL  
Canada.............CSA  
Germany..........VDE  
Switzerland ..... SEV  
Britain ............. BASE/BS  
Japan ............... Electric Appliance Control Act  
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION  
The specific power cord for this 1080p monitor is enclosed and has been selected according to the country  
of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to  
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must  
meet IEC-60320 requirements and should look like Figure A1 below:  
Figure A1  
Figure A2  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA  
Labeled. For 1080p monitors that are placed on a desk or table, only SJT type cord sets may be used. For  
1080p monitors placed directly on the floor, type SVT or SJT cord sets may be used. The cord set must be  
selected according to the current rating for the monitor. Please consult the table below for the selection  
criteria for power cords used in the United States and Canada.  
Cord Type  
Size of Conductors in Cord Maximum Current Rating of Unit  
SJT  
18 AWG  
16 AWG  
14 AWG  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
12 Amps  
10 Amps  
12 Amps  
SVT  
FCC Compliance Statement  
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15  
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may  
cause harmful interference to radio communications if not installed and used in accordance with the  
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or video reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the 1080p monitor and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the Westinghouse Service Center or an experienced technician for assistance.  
FCC Warning  
To assure continued FCC compliance, the user must use a grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a  
shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by  
Westinghouse Digital will void the user's authority to operate this device.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
PRODUCT SAFETY  
Product Safety Instructions  
Follow and obey all warnings and instructions marked on the 1080p Monitor. For your  
safety, please read all the safety and operating instructions before you operate the 1080p  
Monitor. Keep this user’s manual for future reference.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding type plug. A  
polarized plug has two blades with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the  
apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to a void injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or  
has been dropped.  
Other Notices  
Avoid exposing the 1080p monitor to direct sunlight or high temperatures.  
Avoid exposing the monitor to moisture or high humidity  
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted  
repairs by anyone not authorized by the manufacturer  
If your 1080p monitor will not be used for a long period of time, unplug it and  
remove the batteries from the remote control  
Only use attachments/accessories specified by the manufacturer.  
Avoid touching the screen. Skin oils are difficult to remove.  
Never remove the rear cover. Your 1080p monitor contains high-voltage parts. You  
may be seriously injured if you touch them.  
Always handle your LCD display with care when moving it.  
If the monitor emits smoke, abnormal noise, or a strange odor, immediately turn it  
off and contact the Westinghouse Service Center.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
Package Contents  
Your product package includes:  
37” Westinghouse LCD 1080p Monitor  
Remote Control (with batteries)  
Power Cord  
User’s Manual  
Quick Connect Guide  
Warranty Card  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
Front View of the 1080p Monitor  
Use the buttons on the right side of the 1080p Monitor or the buttons on the remote control  
to display the On Screen Display (OSD) menu and adjust the options. The OSD controls  
are defined in “OSD Functions” on page 16.  
Power Indicator  
“IR” Receiver  
Speakers  
Rear View of the 1080p Monitor  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
Side View of the 1080p Monitor  
1. Menu  
Turn OSD Menu On or Off  
Increase/Decrease sound volume or  
adjust a highlighted control while in the  
OSD Menu.  
2. Volume + / -  
3. T/S  
Highlight a control while in the OSD  
Menu.  
( OSD Selection)  
Select active video input or choose a  
selection while in the OSD menu.  
4. Input  
5. Power Button  
Turn Power On or Off  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
1
2
SIDE CONNECTORS  
1. HDMI  
Connect to an external HDMI device such as a cable/satellite  
receiver or DVD player.  
2. DVI (HDCP) / Audio (Left / Right)  
Connect to an external DVI-HDCP device such as a DVD,  
cable/satellite receiver, or computer.  
3
4
3. S-Video  
5
6
Connect to an external video device such as a VCR.  
4. AV Video  
Connect the composite video to an external video device  
such as a VCR.  
7
8
5. S-Video & AV Audio (Left / Right)  
Connect an external audio source to this jack.  
connection supports either S-Video or AV input.  
This  
6. Audio Out (Left / Right)  
9
Connect this output to an external audio amplifier.  
7. Service Port  
For Factory Use only.  
8. VGA  
Using a 15-pin VGA cable, connect to a computer  
9. VGA Audio-In  
Using a 3.5mm mini-jack cable, connect to the Audio out  
(Green) on a computer.  
10. YPbPr1 / Audio1 (Left / Right)  
11  
10  
12  
Connect the component video to an external video device  
such as a DVD player or gaming system.  
11. YPbPr2 / Audio2 (Left / Right)  
Connect the component video to an external video device  
such as a DVD player or gaming system.  
12. AC-IN (Power)  
Connect the power cord from AC-IN to a power source.  
l
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
Use the Remote Control to adjust your Westinghouse 1080p Monitor.  
1. POWER:  
Switch the power on/off  
2. MUTE:  
Turn the sound on/off  
3. PIP:  
Switch to DVI1 source  
24. Video:  
Switch directly to Video source  
25. S-Video:  
Switch directly to S-Video source  
Display Picture-In-Picture  
4. SWAP:  
Switch PIP between main and sub-screen  
pictures  
5. BACKLIGHT:  
Shortcut to backlight adjustment  
6. SLEEP:  
Set sleep timer  
7. FAVORITE:  
For use with Westinghouse HDTVs only.  
8. OSD SUB-MENU SELECTION:  
Select OSD sub-menu option directly by  
number  
1
3
4
2
5
7
6
9. VOL - / +:  
Volume Up/Down adjustment  
10. INPUT:  
8
Scroll input source list  
11. CH/SOURCET / S:  
Source selection up/down  
12.SCALING:  
Set screen to STANDARD or FILL  
13.MENU:  
10  
11  
9
Turn OSD Menu on/off  
14.EXIT:  
Exit the OSD Menu  
15.W / X:  
OSD Menu control; adjust settings  
16.T / S:  
Navigate within OSD Menu  
17. ENTER:  
12  
13  
14  
16  
17  
19  
21  
15  
18  
20  
To choose a selection  
18. EPG:  
For use with Westinghouse HDTVs only.  
19. INFO:  
Display main/sub-screen picture source  
20. PC:  
Switch directly to PC source  
21. HDMI:  
23  
22  
24  
25  
Switch directly to HDMI source  
22. YPbPr:  
Switch to YPbPr1/YPrPsource  
23. DVI:  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
Installation  
1. Insert Remote Control Batteries  
1) Remove the battery cover.  
2) Insert the batteries corresponding to the (+) and () marks on the battery  
compartment.  
3) Re-attach the battery cover.  
CAUTION:  
Only use AAA batteries.  
Do not mix new and old batteries. This may result in cracking or leakage, which may pose a  
fire risk or lead to personal injury.  
Insert batteries according to (+) and () markings. Inserting the batteries incorrectly may  
result in cracking or leakage, which may pose a fire risk or lead to personal injury.  
Dispose of used batteries in accordance with local laws and regulations.  
Keep batteries away from children and pets.  
When the remote control will not be used for an extended period, remove the batteries.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
2. Connect the 1080p Monitor to a computer  
Connect a VGA or DVI cable and an audio cable to the back of the 1080p Monitor.  
IMPORTANT: Before you begin, make sure all devices are turned off.  
VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT  
port to the 1080p Monitor VGA IN port. Connect a stereo mini cable from the  
computer’s AUDIO OUT port to the VGA AUDIO IN port on the 1080p Monitor.  
DVI CONNECTION: Connect a Digital DVI cable from your computer to the 1080p  
Monitor DVI port. Using a 3.5mm mini cable to RCA Red/White (Left/Right) audio  
converter cable, connect the 3.5mm cable plug into the computer’s AUDIO OUT port  
and the RCA Red/White cable plug into the DVI AUDIO IN port on the 1080p Monitor.  
3. Connect the 1080p Monitor to AV Devices  
Connect one or all of the following compatible devices into the back of the 1080p  
Monitor.  
4. Connect power cable and power on the 1080p Monitor  
Connect the power cord to the back of the 1080p Monitor then to a properly grounded  
AC outlet and press the Power button to turn on the monitor.  
NOTE: The monitor will take a few seconds to power up.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
INSTALLATION  
5. Turn on your computer  
The 1080p Monitor will auto adjust to the resolution of the computer.  
For the best picture quality, set the PC timing mode to 1920 x 1080 at 60Hz, then turn  
off and reboot the computer. Refer to your computer’s graphic card user guide for  
questions on how to set this timing mode.  
6. Turn on the cable box or satellite receiver  
If using a DVI or HDMI connection, the cable box or satellite receiver will need to be  
restarted to complete HDCP authentication to view the picture.  
7. Select an input source for the 1080p Monitor using the OSD menu or  
remote control  
To display the change the input source, press the Input button on the right side of the  
1080p Monitor or the Input key on the remote control.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
On-Screen Display (OSD) Function  
To display the OSD main menu, press the Menu button on the right side of the 1080p  
Monitor or the MENU key on the remote control. Use the /arrow keys to scroll up and  
down the OSD main menu. Press the 4 arrow key to select the desired OSD sub-menu.  
Main Menu  
Using the main menu, you can adjust the Picture, PC, Audio, PIP, and General Setting  
parameters. To select a sub-menu option, use the ▲/▼arrow keys on the right side of the  
1080p monitor or on the remote control. Then use the 3/4arrow keys to adjust the  
sub-menu setting. Finally, press the Menu button on the side of the 1080p monitor or the  
Exit button on the remote control to exit the OSD menu.  
OSD Main Menu  
OSD Sub-Menu  
Help Menu  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
Picture  
Function Name  
Function  
1. Brightness  
2. Contrast  
3. Saturation  
4. Hue  
Adjust the black level of the display.  
Adjust the white level of the display.  
Adjust the intensity of the colors.  
Adjust the color towards either red or green.  
Color temperature adjustment (Warm, Normal, Cool)  
Adjust the clarity of the picture.  
5. Color Temp  
6. Sharpness  
Set display to “STANDARD” or “FILL”  
Adjusts the ratio between the width of the picture and the height  
of the picture. A 16:9 picture will be displayed in its original  
format.  
7. Aspect Ratio  
Standard – conventional format used for viewing 4:3  
programs in their normal format.  
Fill – format that horizontally stretches 4:3 pictures to the  
edge of the screen (some programs will be broadcasted  
with black or gray bars on the top and bottom or sides of  
the picture).  
Adjust the intensity of the lamp that illuminates the 1080p  
monitor.  
Reset the video settings to the factory default.  
8. Backlight  
9. Reset  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
PC Parameters (VGA Only)  
Function Name  
Function  
Automatically re-centers the image to the middle of the screen  
by synchronizing both vertical and horizontal refresh rate and  
resolution.  
1. Auto Adjust  
2. Clock  
Clock adjustment  
3. Phase  
4. Position  
Adjust the Phase control to eliminate horizontal streaking.  
Adjust the horizontal and vertical position of the screen image.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
Audio  
Function Name  
Function  
1. Volume  
2. Bass  
Volume adjustment  
Bass adjustment  
3. Treble  
4. Balance  
5. Mute  
Treble adjustment  
Balance adjustment  
Turn audio On or Off  
6. Speaker  
7. Reset  
Select internal or external speakers  
Reset audio settings  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
Picture-in-Picture  
Function Name  
Function  
Select display options:  
Off, PIP, PBP, POP  
1. Display Mode  
Select main screen source:  
VGA, HDMI, DVI, AV, S-Video, YPbPr1, YPbPr2  
Select PIP sub-screen source:  
VGA, HDMI, DVI, AV, S-Video, YPbPr1, YPbPr2  
2. Main Source  
3. PIP Source  
4. Swap  
Swap main screen and sub-screen source  
5. PIP Position  
Sub-screen display horizontal/vertical position adjustment  
Adjust sub-screen display size:  
Small, Medium, Large  
6. PIP Size  
Select main screen or sub-screen audio source:  
Main, Sub  
7. Audio Selection  
The table below shows the functional combinations for PIP and SWAP (O – PIP and Swap  
are functional).  
Sub VGA  
AV  
S-Video YPbPr1  
YPbPr2  
DVI  
HDMI  
Main  
AV  
O
X
X
X
X
O
O
O
O
O
O
O
O
O
S-Video  
YPbPr1  
YPbPr2  
VGA  
X
X
X
O
O
O
O
O
O
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
HDMI  
DVI  
O
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
OSD FUNCTION  
General Settings  
Function Name  
Function  
1. Menu Position  
OSD Menu horizontal/vertical position adjustment  
Set the amount of time before the OSD disappears.  
10 seconds  
2. Menu Timeout  
30 seconds  
60 seconds  
Select the OSD language:  
English, French, Spanish  
3. Menu Language  
Set the monitor to turn off after a specified amount of time:  
Off, 30 minutes, 60 minutes, 120 minutes  
4. Sleep Timer  
NOTE: The W4207 HD Monitor will take a few seconds to turn  
on from sleep mode.  
Autosource™ will detect a new incoming signal and  
automatically switch the input source to the connection of the  
new source’s device.  
Power saving mode. Backlight will turn off automatically after  
“No Signal” is detected for 1, 5 or 10 minutes.  
5. Autosource™  
6. DPMS  
7 System Info  
8. LED  
Displays the system information  
Turns the LED power indicator On or Off  
Resets all OSD menu settings of the W4207 HD Monitor back to  
the factory default values  
9. Factory Reset  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
APPENDIX  
Troubleshooting  
No Power  
Make sure the power cord is securely connected to the AC In jack on the back of  
the 1080p monitor.  
Make sure the AC power cord is securely connected to the AC socket.  
Plug another electrical device (such as a radio) to the power outlet to verify that the  
outlet is supplying the proper voltage.  
Power is suddenly turned off  
Check if Sleep Timer is set. If so, turn it off.  
Remote Control Does Not Work  
Press only one button at a time.  
Make sure the batteries are inserted correctly.  
Replace the batteries with new ones, if necessary.  
Remote Control Code Not Found in a “Universal” Remote  
Purchase a separate “learning” remote control.  
Go to www.westinghousedigital.com for a list of remote codes.  
No Picture  
Check the video connection for the source input.  
Make sure the video cable connected to the 1080p monitor is tightly secured to the  
video output port on the back of the computer. If the other end of the video cable  
is not attached properly to the 1080p monitor, secure it tightly.  
Adjust the brightness and contrast level.  
If you are using a Macintosh computer older than G3, you need a Macintosh  
adapter.  
No Picture or “No Input Signal” (VGA Source)  
Check the VGA cable connection.  
Lower the video resolution on the computer and try plugging in the cable again.  
Picture is cut off/with sidebar screen.  
Use Auto Adjust.  
Make sure the aspect ratio is set correctly.  
Wrong or Abnormal Colors  
If any colors (red, green, or blue) are missing, check the video cable to make sure it  
is connected securely. Loose or broken pins in the cable connector could cause an  
improper connection.  
Connect the 1080p monitor to another computer.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
APPENDIX  
Troubleshooting (cont’d)  
AUDIO Interconnection Issues  
Remember that the S-Video and Composite AV input share the same audio source.  
No Sound  
Check the audio connection.  
Press MUTE on the remote control, so that MUTE disappears from the screen.  
Press the Volume + (Up) key on the remote control.  
.
How Can I Find More Help?  
Contact Westinghouse Customer Service at (866) 287-5555 or write us at  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
APPENDIX  
Cleaning the 1080p Monitor  
MAKE SURE THE 1080p MONITOR IS TURNED OFF  
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE  
To clean the screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner  
onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1. Use a soft, dry cloth.  
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-  
abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on  
the 1080p monitor screen or case. Some chemical cleaners have been reported to damage the  
screen and or 1080p monitor case. Westinghouse Digital will not be liable for damage resulting  
from use of any ammonia or alcohol-based cleaners.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
APPENDIX  
Specifications  
Model Name  
LVM-37w3se  
37" TFT (Thin Film Transistor), Active Matrix LCD, 1920*1080 vertical  
stripe  
Panel  
Type  
Color  
Anti-glare coating  
Viewing Angles  
Input Signal  
176° (H) / 176° (V) (typ.)  
Video/Audio  
RGB Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1  
- H/V separated (TTL) for PC  
HDMI-HDCP * 1  
DVI-D * 1 (HDCP support) / RCA (L/R)  
- fh: 30-80 kHz, fv: 50-75 Hz NTSC  
Component Video * 2 / RCA (L/R) Stereo * 2LVM  
Composite * 1 / S–Video * 1 / RCA (L/R) stereo * 1 (shared)  
RCA (L/R)  
Output Signal  
Compatibility  
PC Compatible  
Audio  
480i, 480P, 720P, 1080i, 1080p  
Recommended 1920 x 1080P/I @ 60Hz  
Supported  
1280 x 1024 @ 60 Hz  
720 x 400 @ 70 Hz  
1280 x 768 @ 60Hz  
1280 x 720 @ 60 Hz  
1024 x 768 @ 60 Hz  
800 x 600 @ 60 Hz  
640 x 480 @ 60 Hz  
Speaker Output  
15W (x2 Channels)  
Power  
Voltage  
100-240VAC, 50-60Hz, 3.5A, universal.  
0 to +35° C (Hum < 90%)  
-20 to +60o C (Hum < 35%)  
Temperature  
Operating  
Storage  
Operating  
Storage  
Physical  
20 to 90% non-condensing  
Humidity (Relative)  
10 to 90% non-condensing.  
37.3” (W) x 25.9” (H) x 8.17” (D)  
Dimensions  
Weight  
Net / Gross  
49.6 lbs / 60.6 lbs  
Regulations  
Power saving  
Modes  
UL/C-UL, FCC-B  
On  
<210W Typical (Blue LED)  
<1.4W (LED Off)  
Active Off  
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in  
permanent damage to the 1080p monitor.  
Note: Product Specifications are subject to change without notice.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Westinghouse Digital Electronics  
Santa Fe Springs, CA  
SE-UM-3703-0701  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Projection Television LD 2240 User Manual
Whirlpool Air Conditioner ACG052XJ0 User Manual
Whistler Radar Detector XTR 555 User Manual
Woodstock Medical Alarms D4157 User Manual
Xantech Switch D5XH User Manual
Yamaha Computer Hardware DRCX User Manual
Yamaha MiniDisc Player MDX 595 User Manual
Yamaha Stereo Amplifier AX 596 User Manual
Zanussi Microwave Oven ZMB 30 CST User Manual
Zanussi Refrigerator ZTR 56 RL User Manual