WH-TV/DVD21NO
COMBINED 21" TV AND DVD PLAYER
OWNER'S MANUAL
TV
+
Please read this manual carefully
before using this TV set and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with petrol, paraffin or other
powerful solvents. Permanent damage
will result !
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TVsetmustonly
beusedindryin
door locations.
2. In order to prolong the life of the
product, please use in a well
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
Leave a 10cm gap
ventilated location.
around it. Do not
obstruct air flowwith
soft furnishings
the TV set.
above or beneath.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, we
recommended that the TV set be
disconnected you disconnect the TV
set from the AC power outlet and
remove the aerial plug.
3. Don't place the
TV set in direct
sunlight or near a
heatsource.
Cleaning the tube
If the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Aerial Connection
If the picture is not clear or snowy, we recommend that you use an outdoor
aerial.In different places, the suitable antenna type and position are different.
300 twin-lead cable
Antenna adapter
(Not supplied)
75 coaxial cable
COAXIAL
Aerial input
75 standard
coaxial type
OUT
IN
L
R
VIDEO
AUDIO
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
Tips for remote operation
!When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
batteries to prevent leakage.
!
!
Remove the battery cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment. ! Do not throw the batteries into fire.
Dispose of used batteries at your local
recycling centre.
!
Do not drop, dampen or disassemble
the remote control.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Buttons and External Sockets
Front panel the TV set
PROGRAME
Rear panel of the TV set
COAXIAL
COAXIAL
Antenna input socket
Audio right channeloutput terminal
Video output terminal
OUT
Video input terminal
Audio left channeloutput terminal
Audio right channelinput terminal
IN
L
R
VIDEO
AUDIO
Audio left channelinput terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons on the remote control
Stand By
DVD Open/close
Calendar
POWER CALENDAR TIME OPEN/CLOSE
Scan
SCAN
SWAP
CALL
MUTE
TV Time Menu
Mute
Former Program
Call Screen Display
Program Number
(Not available)
TV/AV Exchange
Digital Selector
TV/DVD
1
5
9
2
6
0
3
7
4
8
TV/AV
-/--
TV/DVD
P+
Volume/Channel Selection
MENU
MENU
V-
V+
Exit Screen Display
Picture Mode
EXIT
P.STD
P-
DVD STOP
STOP
REV
PAUSE/STEP
SETUP
(Not available)
DVD SETUP
FWD
PREV
NEXT
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
DVD NEXT
DVD PREVIOUS
DVD REPEAT
DVD PLAY/ENTER
DVD A-B REPEAT
DVD Cursor Move button
TITLE/PBC SEARCH
ANGLE
AUDIO PROGRAM ZOOM
D.CALL
H.LOCK
UP
SUBTITLE
10+
LEFT
RIGHT
DVD SLOW
DVD ANGLE
DVD SEARCH
DVD Audio
DOWN
DVD TITLE
DVD PROGRAM
DVD CALL
DVD SUBTITLE
Zoom
DVD 10+
Child Lock
(Not available)
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on/ off the TV set
This section explains the use of the power button and remote handset
to turn your unit on and off.
Switching the TV set on/ off
Switching the TV set on/ off
1 Press the AC power switch on the front of the
TV. The power indicator will light.
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you can't operate the TV set with a
remote control, you can turn it on by pressing
the P+/- buttons on the TV set (Child Lock must
be turned off).
4
AUTO
I
2 If you want to change to standby mode,
POWER
press down the button
on the remote
control. Press again to switch back on.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the front panel.
Auto switch off function
If transmissions are finished for the day, the
Automatic Power Off feature will put the TV to
standby automatically. The Automatic Power
Off feature will not operate in AV mode or
when the background is set to off (see page
17).
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch a TV program on a channel which has been tuned to a broadcast.
Watching TV programs
How to select TV program
Select the desired program
1 Using number buttons
Directly enter thechannel number withthe numeric keypad
on the remotecontrol.
1
5
9
2
6
0
3
7
4
8
To select channel numbersbetween 10 ~99 press [-/--]button
and enter thetwo digit channelnumber
To select channel numbersbetween 100 ~218 press [-/--]button
twice and enterthe 3 digitchannel number
2 Using the P+/- buttons
Press the P+button to increasechannel number.
Press the P-button to decreasechannel number.
P+
Select the desired sound
MENU
Press the V-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
V-
V+
P-
How to select the menu
Press the MENUbutton and
the menus willappear at the
bottom of thescreen. The
PIC icon willinitially be
flashing. Each subsequent
press of themenu button
P+
MENU
V-
V+
P-
will highlight SOU(sound),
FUN (function), TUN
(tuning) icons respectively.
Press the P-button to display
the appropriate menu.PressEXIT to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV continued
Press the SWAP button to select the channel you were watching previously.
Auto scan function scans through all programs in memory including those with
"skip" set to "off" (see "Program skip"on page 13).
Program swap and auto scan functions
Program swap
Press the SWAP button to
18
select the channel you were
AUTO
watching previously.
I
8
SWAP
AUTO
I
18
AUTO
I
Auto program scan
1 Press the SCAN button to
scan through all the memorised
TV programs. The scan will
pause for about 2 seconds on
each channel.
SCAN
1
AUTO
I
BROWSE
2
BROWSE
3
BROWSE
1
AUTO
1
BROWSE
2 If you want to stop the
function during auto tunning,
simply press the SCAN button
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
Automatic search
1 Press the MENU button. The
MAIN MENU will appear with the
PIC (picture) icon flashing. Press
the MENU button a further 3 times
until the TUN (tuning) icon is
flashing.Press P- to enter the
TUNING menu.
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
P-
2 Press the P+/- buttons to
select "AUTO SEARCH".
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the V+ button to
start automatic search function
operates. All channels that are
locally available will be preset in
the order that they are found.
Depending in which location you
are, this is generally not in the
order you expect. Please see
Page 19 (Organise).
P+
AUTO SEARCH
152.25MHz
MENU
V-
V+
P-
CALL
Display function
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
3
AUTO
I
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or the
PROGRAMME NUMBER (0-9) to
choose the desired channel
(e.g. Channel 1).
1
AUTO
I
P+
2 Press the MENU button. The MAIN MENU will appear
with the PIC (picture) icon flashing. Press the MENU button
a further 3 times until the TUN (tuning) icon is flashing.
Press P- to enter the TUNING menu.
MENU
V-
V+
P-
3 Press the P+/- buttons to
select "SEARCH".
PROG NO
ORGANISE
SEARCH
P+
FINE TUNE
AUTO SEARCH
4 Press the V- button to
search downwards or the V+
button to search upwards.
MENU
V-
V+
P-
6
SEARCH
152.25MHz
To turn off the on-screen menu
EXIT
In general, after you press the MENU button, the menu item
display (PIC, SOU,FUN,TUN) will automatically disappear
within 30 seconds. If you want to eliminate these contents
immediately, please press the EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose the desired
channel (e.g. channel 1).
1
P+
AUTO
1
MENU
V-
V+
P-
2 Press the MENU button. The MAIN MENU will appear
with the PIC (picture) icon flashing. Press the MENU
button a further 3 times until the TUN (tuning) icon is
flashing.Press P- to enter the TUNING menu.
3 Press the P+/- buttons to
select " FINE TUNE".
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
4 Use the V-/+ buttons to
5
P-
manually fine tune the station
until the best picture and sound
are obtained.
FINE TUNE
152.25MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Program skip
Program skip
Channels can be set so that they are skipped during
program selection.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose the desired
channel (e.g. channel 1).
1
P+
AUTO
I
MENU
V-
V+
P-
2 Press the MENU button. The MAIN MENU will appear
with the PIC (picture) icon flashing. Press the MENU
button a further 3 times until the TUN (tuning) icon is
flashing.Press P- to enter the TUNING menu.
P+
3 Press the P+/- buttons to
select "SKIP".
MENU
V-
V+
SKIP
4 Press the V-/+ buttons to
turn the SKIP function "ON".
PROG NO
ORGANISE
SEARCH
P-
FINE TUNE
5 Press the EXIT button to close
the menu. When you use the P+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
If you want to recover the skipped channel
P+
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat steps 1-3 above.
MENU
V-
V+
3 Press the V-/+ buttons to turn the SKIP function "OFF".
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
Press the P.STD button to select the desired
STANDARD
P.STD
RICH
picture quality. Five kinds of picture modes
(i.e., "STANDARD","RICH", "USER","LISTEN",
"SOFT" ) can be selected in turn.
USER
LISTEN
SOFT
The 5 modes are
Listen-This is a new feature that blacks out
the TV screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
How to customize your own picture status
1 Press the MENU button. The MAIN MENU will appear with
the PIC (picture) icon flashing.Press P- to enter the PICTURE
menu.
P+
MENU
V-
V+
P-
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
2 Press the P+/- buttons to select the item to adjusted, then press
the V-/+ buttons to obtain the desired effect.
I T E M
Press V-
Press V+
Strong
Weak
P+
Bright
Dark
MENU
V-
V+
Deep
Shallow
Soft
Sharp
P-
lean to green
lean to purple
Note:The "Hue" item only appears when the colour system is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Black Stretch Automatically increases the contrast range
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)
Black stretch and noise reduce
How to select BLACK STRETCH
1Press the MENU button. The
MAIN MENU will appear with the
PIC (picture) icon flashing.Press
BACKGROUND
the MENU button a further 2
ON
BLACK STRETCH
NOISE REDUCE
FADE
times until the FUN (function)
icon is flashing.Press P- to
enter the FUNCTION menu.
P+
AVL
MENU
V-
V+
P-
2 Press the P+/- button to select "BLACK STRETCH".Press the
V-/+ buttons to turn it "ON" or "OFF".
How to select NOISE REDUCE
1Press the MENU button. The MAIN
MENU will appear with the PIC
(picture) icon flashing.Press the
P+
BACKGROUND
MENU button a further 2 times until
BLACK STRETCH
the FUN (function) icon is flashing.
NOISE REDUCE
MENU
V-
V+
Press P- to enter the FUNCTION
menu.
FADE
AVL
P-
2 Press the P+/- buttons to select "NOISE REDUCE".Press the
V-/+ buttons to turn it "ON" or "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Mute and Fade
Sound mute
1 Press the MUTE button on the
remote control to turn off the
sound. MUTE will appear on the
top left of the display.
MUTE
MUTE
2 Press MUTE again to turn the
sound back on.
Fade
When FADE is turned on, the TV will protect the tube by
fading the picture in when the TV is switched on, and
fading the pictureout when theTV is switched off.
1Press the MENU button.
The MAIN MENU will
P+
FUN
appear with the PIC (picture)
BACKGROUND
icon flashing. Press the
MENU
V-
V+
BLACK STRETCH
MENU button a further 2
times until the FUN
(function) icon is flashing.
NOISE REDUCE
FADE
AVL
P-
Press P- to enter the
FUNCTION menu.
P+
2 Press the P+/- buttons to select FADE.
MENU
V-
V+
3 Press the V-/+ button to turn the FADE function "ON" or "OFF"
.
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnected from the
power supply or is turned off by the main power on
the front panel, the clock losespower and will need to
be reset when the power is reconnected.
TIME
1 Press the TIME button, and the
TIME menu appears on the
screen.
P+
TIME
CLOCK
17:18
18:00
1
--:--
0
2 Press the P+/- buttons select
"CLOCK", then press the V -/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/ +buttons to adjust the
value of minutes .
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
MENU
V-
V+
P-
--:--
1
On/off timer
On-off time setting is cleared after timer operates.
TIME
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down at a preset time.
1 Press the TIME button, and
the TIME menu display on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
2 Press the P+/- buttons to
select "ON TIME", then press
the V-/+ buttons to set the value
in hour position; press again
theP+/- buttons to select the
minute position and set the
value of the minute(take 18:00
as an example).
P+
--:--
1
MENU
V-
V+
P-
3 Press the P+/- buttons to
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
0
select "ON PROG", then press
the V-/+ or program number
buttons to select your desired
channel (take 8 as an example).
--:--
1
4 Repeat step 1-2 to set OFF
TIME(take 23:00 as an example).
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Continued
Sleep timer and program preset
Sleep timer
The sleep timer switches the set
0
to stand-by after the sleeptime
has elapsed. Sleep time can be
set in 10minute intervals upto
180 minutes, as shown in the
illustration. Setting the sleep
time to zero turns off the sleep timer.
10
20
TIME
170
180
1 Press the TIME button, and the
TIME menu appears on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
2 Press the P+/- buttons to
select "SLEEP TIMER".
P+
17:18
18:00
8
23:00
120
--:--
1
MENU
V-
V+
3 press the V-/+ buttons to set
the value of the SLEEP TIMER.
P-
REMIND PROG function
Program remind timer, that can automatically changechannel
when a program on a different channel is due to start.
TIME
1 Press the TIME button, and the
TIME menu display on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
19:00
1
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V-/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute(take 19:00 as an
example).
P+
MENU
V-
V+
3 Press the P+/- buttons to
select "REMIND PROG", then
press the V-/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
P-
17:18
18:00
8
23:00
120
19:00
18
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Screen saver and Calendar
How to start screen saver function
When the background
function is ON a bouncing
'NO SIGNAL' will be
displayed on a blue
back ground.
NO SIGNAL
1Press the MENU button. The MAIN MENU will appear
with the PIC (picture) icon flashing. Press the MENU
button a further 2 times until the FUN (function) icon is
flashing.Press P- to enter the FUNCTION menu.
P+
MENU
V-
V+
P-
2 Press the P+/- buttons to select
BACKGROUND. Then press
V+/- to turn the BACKGROUND
BACKGROUND
function ON or OFF.
BLACK STRETCH
NOISE REDUCE
FADE
AVL
Calendar function
CALENDAR
1 Press the CALENDAR
button. The calendar menu
will be displayed on the
screen.
The date on the top line is in
Year / Month /Day format.
P+
MENU
2 Press the P+/- buttons to highlight
the year, month or day number. Press
the V-/+ buttons to set or change
each number.
V-
V+
P-
Press EXIT or wait aminute for thecalendar to disappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
AVL
AVL function
Automatic Volume Level control reduces the effect of
large volume changes. For instance, when
advertisements come on.
1Press the MENU button.
The MAIN MENU will
appear with the PIC
P+
BACKGROUND
BLACK STRETCH
(picture) icon flashing.
MENU
V-
V+
NOISE REDUCE
FADE
AVL
Press the MENU button
a further 2 times until the
FUN (function) icon is
P-
flashing.Press P- to enter
the FUNCTION menu.
P+
2 Press the P+/- button to select
"AVL" .
MENU
V-
V+
P-
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
AVL
P+
3 Press V-/+ button to turn the
AVL function "ON" or "OFF"
.
MENU
V-
V+
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Organise functions
ORGANISE
ORGANISE
This feature enables TV programmes that may be on a wrong program
number to be moved to another number.
This feature is very useful when Automatic Search Tuning has been used
because programmes are stored in the order they are found, which is usually
not the desired order.
When organising, it is best to start from the lowest programme number first.
P+
1. Press the MENU button. The
MAIN MENU will appear with the
PIC icon flashing.
MENU
V-
V+
Press the MENU button a further 3
times until the TUN icon is flashing.
Press P- to enter the TUNING
menu.
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
P-
2. Press P+ or P- buttons to
select ORGANISE.
Press V+ to enter the menu.
P+
(For Example) If the Automatic Search function has placed BBC1
on programme position 6 and you would like to move this so it
appears on programme position 1.
MENU
V-
V+
3. Use P+ or P- to select “FROM”.
4. Press V+ or V- to change
P-
ORGANISE
the “FORM” programme number
to 6.
FROM
TO
6
1
5. Use P+ or P- to select “TO”.
6. Press V+ or V- to change
the “TO” programme number to 1.
7.Use P+ or P- to select “MOVE
CHANNEL”.
P+
MOVE CHANNEL
MENU
V-
V+
8. Use V+ or V- to perform the
action.
P-
The diagrams below explain how the ORGANISE function
affects other channels when position 6 is moved to position 1.
Other programmes move
down to allow for space
Start Position
Move FROM 6, TO 1
P 01 Contents
P 02 Contents
P 03 Contents
P 04 Contents
P 05 Contents
P 06 Contents
P 01 Contents Contents
P 02 Contents
P 03 Contents
P 04 Contents
P 05 Contents
P 06
P 01 Contents
P 02 Contents
P 03 Contents
P 04 Contents
P 05 Contents
P 06 Contents
What was on programme position 6 is now on proramme position 1.
All the other stored channels have now moved down 1 position so that now.
What was on programme position 1 is now on proramme position 2.
What was on programme position 2 is now on proramme position 3.
What was on programme position 3 is now on proramme position 4.
What was on programme position 4 is now on proramme position 5.
What was on programme position 5 is now on proramme position 6.
Note:It needs some time to move two channels,please wait till the TV
finishes the process.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides theoption of lockingvarious parts ofthe TV to guard
against unauthorised viewing.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
H.LOCK
1 Press H.LOCK button, the
screen will showas the form
on the right.
INPUT PASSWORD ----
P+
2 Press the0 button fourtimes,
and enter the menu of LOCK
setting. Press P+/- button
and move theindicator to
CHANGE PW. , and press
V+ button to enter the
sub-menu of change
LOCK SET
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX VOLUME
UNLOCK
OFF
1
MENU
V-
V+
OFF
OFF
50
P-
password.
1
5
9
2
6
0
3
4
8
3 Press the PROGRAM
NUMBER 0-9 button and
input a four-digits
CHANGE PW.
NEW PASSWORD----
CONFIRM ----
7
password.
4 After inputting your new password, please confirm it by
keying it in again.You can now enter the lock settings using
your new password.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are TUNING LOCK,AV LOCK, and CHILD LOCK,
etc,you can set it due to your need.
H.LOCK
INPUT PASSWORD ----
1 Press the H.LOCK button,
the screen will show as the
form on the right.
1
5
9
2
3
7
4
8
2 Press the PROGRAM
NUMBER 0-9 button 0 for
four times(or input the
password you set), and enter
the LOCK menu.
LOCK SET
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX VOLUME
UNLOCK
6
0
OFF
1
OFF
OFF
50
P+
3 Press P+/-button, move
the indicator to the lock function you require and press V+
or V- button to set it ON orOFF, change setting or activate it.
MENU
V-
V+
P-
Description of eachlock function
1.When the TUNING LOCK is set ON, if you want to enter the
TUNING menu, you will have to type the password.
2.The PRESETPROG allows the TV toalways be on the same
channel when you turn it on.
3.When AV LOCK is set ON the AV channel cannotbe used, hencethe
screen will indicate thatAV hasbeen locked.
4.When the CHILD LOCK is set ON, if the buttons on the TV
are pressed, the screen will indicate that the TV set is in the
status of CHILD LOCK, and the buttons won't work.
5.The MAX VOLUME allows you to set a figure for the top limit
of volume. Volume controlstill shows 1- 100 butvolume level isscaled
down.
6.The UNLOCKallows to youto set allthe lock toOFF and set
the MAX VOLUMEto 100.
7 If youforget your passwordor a passwordis accidentally set
enter 9443 asthe password. This will enableyou to regaincontrol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Basic Playback
Preparations
Stop playback
Press the DVD/TV button on the remote control
1. Press STOP
button to go to stop mode, the TV
or the TV to turn on the DVD player.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
Basic playback
2. Press PLAY/ENTER to resume play-back from the
location where playback was stopped.
3. Press STOP twice to stop completely.
Play must thenresume from thetitle beginning.
1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player (see "Playable discs").
Previous and Next
During Playing, pressing the PREV
keywill
restart the currentchapter and skip chapters
backwards with each subsequent press until the
start of thedisc is reached.
Each press ofNEXT
skip the currentchapter and play the next one.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
key duringplaying will
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
In the caseof CD audio and photo discsthe next
track, song orphoto is selected.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP repeatedly
to single step forward frame by frame in the video.
2. Press PLAY/ENTER to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. There will be some differences for other kinds of disc.
PROGRAM
SUBTITLE
When playing discs, press "PROGRAM" to enter
program mode. Starting with program number "01"
highlighted, press the digit buttons to select the title
and chapter number that you want. When finished
move the cursor to select "START" . This will start
the program playback.
Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
SEARCH
REPEAT
Press " SEARCH " once to display Disc Go To --:--,
use numeric key to enter the desired time of Disc.
Press " SEARCH " twice to display Track Go To --:--,
use numeric keys to enter the desired time of track.
Press " SEARCH " 3 times to display Select Track
--/03, use numeric keys to enter the desired track.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press A-B to select the Start point. Press
again to select the End point. A third press
will cancel the function.
Press PLAY/ENTER to resume normal playback;
Note: This function is invalid for CD.
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function) Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole view
and exterior scene.
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display root menu,select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
For CD audio, press this button to cycle between
Mono Left, Mono Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
above 3 seconds interval.
D.CALL
Pressing this key will cycle through "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ". Each displays the appropriate
time information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
Users can recordpictures from digitalcamera or scanneronto a CD-Ror CD-RW disc using a
personal computer, CD recording driveand suitable software. Be sure touse good quality
recordable discs andtrustworthy software withgood instructions. Takecare with recording
settings: the discmust be recordedas data discISO9660 format, shortfile names (8
characters) are best, no multi-session andmust be "finalised".
JPEG disc containspictures in acompact file formatwhich can bedecoded by theDVD
player and output for viewing andenjoyment on thetelevision screen.
When a disccontaining standard JPEGpicture files isinserted into theplayer, anavigation
menu will bedisplayed automatically. Use theUP and DOWN cursor buttonsto select afile
then press PLAY/ENTER. The slide show willcommence. Press PREVIOUSor NEXT to move
between pictures. Presspause to stopon the currentpicture. Press PLAY/ENTER to resume
normal playing.
Press MENU togo back tofolder and fileview.
Press STOP to display thumbnailpicture menu thenselect "Menu" on-screenwith the cursor
buttons, press PLAY/ENTER to stepthrough help menufor JPEG viewingcontrols.
"Transition Effect"changes how onepicture changes tothe next inthe "slide show".
Program button changesbetween folder andfile list.
Some repeat functionscan be used.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video
pictures. This can be turned off on the GENERAL SETUPPAGE (see Pg. 26)
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page and Password Setup Page
will be displayed in turn.
SETUP
..General Setup Page..
.
3:Ps
.
3:Lb
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4
On
4
ENG
16
9
2.Press to select,the
or
item,then press to enter the
submenu.
On
..Preference Page..
or
3.Press to setup,then
press PLAY/ENTER to confirm.
PAL
AUTO
NTSC
PLAY/ENTER
TV Type Auto
Parental
Password
Default
4.Press SETUP button to exit
the menu.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
.
3:Ps
.
3:Lb
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4
On
4
ENG
16
9
SETUP
On
4
3/PS (PS = Pan and Scan)
Screen Saver Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4
3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
PLAY/ENTER
16
9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
..General Setup Page..
ANGLE MARK: Users can select a particular
.
camera angle when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
TV Display
Angle Mark
OSD Lang
Spdif Output
LB
On
On
Off
ENG
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
On Screen Display (OSD) Language: Users
can select on-screen display language.
ENG
English
French
On
Screen Saver Off
SPDlF OUTPUT MODE: Sets the audio outputs.
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output through the
back-paneI connections for 2-CH audio out or 5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This
..General Setup Page..
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
Spdif Off
surround sound format is output to a Dolby Digital/DTS decoder
through the coaxial connector on the back panel of the product.
On
Spdif / Raw
Spdif / Pcm
Screen Saver Off
CAPTIONS: This function allows you to display or hide the caption.
..General Setup Page..
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
On
On
Off
Screen Saver Off
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
..General Setup Page..
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
On
Screen Saver Off
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
..Preference Page..
TV TYPE: This player
supports different TV output,
including MULTI(Auto),
NTSC, and PAL systems.
Usually please set to MULTI.
PAL
AUTO
NTSC
TV Type Auto
Parental
Password
Default
SETUP
PARENTAL: The parental
control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
..Preference Page..
TV Type Auto
Parental
1 Kid Saf
2 G
3 Pg
PLAY/ENTER
Password
Default
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password
..Preference Page..
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
TV Type Auto
Parental
Password
Default
Change
Old Password
New Password
Confirm PWD
NOTE:If you forgetyour password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
SETUP
DEFAULT: Resets all settings
..Preference Page..
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
TV Type Auto
Parental
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standard discs, even if they may be labelled as above.
The performance of CD-R or CD-RW discs depends on the way the disc is prepared
- see under "Special function playback - JPEG disc playback".
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
minutes minutes minutes minutes
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV set to the other video and audio equipment
Connection of AV input /output terminal
The figure belowshows how toconnect external equipmentusing AV signals.
an additional TV
DVD, VCD or otherunits
Video output
Laser DVD with outputterminal
DVD, VCD or otherunits
There is alsoan AV input onthe side ofyour television. Usethe LeftAudio input (whiteterminal on
the TV), ifyou are connectingequipment with monosound. The MONOsound will bedelivered by
both left andright speakers.
DVD player
VCR
Video output
Audio left output
Audio right output
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Noise
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No colour
No sound
Ensure that the power supply is connected to
the TV setand turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
No sound
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically demagnetisethe screen.
In severe casesyou may needto repeat thisprocess.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
WH-TV/DVD21NO
M o d e l
Colour system
PAL, NTSC PLAYBACK
I
Sound system
Picture tube
51cm colour picture pure flat tube
2X2W 10% THD
Sound output power
Power requirements
Power consumption
Dimension mm
AC 240V~ 50Hz
80W
500 Width x480 Depth x485 Height
mm
Remote control
Owner's manual
Battery(AA)
x1
x1
x2
Accessories
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|