WIRELESS INTERCOM SYSTEM
5-CHANNEL
RADIO INTERCOM
Models: WHDBI-5C (One Console & One Doorbell)
WHI-5S (One Console)
Doorbell
Console
Installation & Operation Instructions
(760) 438-7000 • FAX (760) 438-7043
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE FEATURES
4
2
3
1
5
12
6
11
7
10
8
9
1. STATION INDICATORS
Indicators light when a station number button is pressed to show the station that will be called. Indicators light
to show who called or a call in progress. Indicators flash during conversation to show the busy stations.
2. STATION BUTTONS
Press a button to select the intercom station to be called.
3. STATION LABEL AREAS
For applying labels that identify the intercom station locations.
4. ANTENNA
Receives and sends the wireless intercom signals. Antenna pivots for Console horizontal and vertical
mounting.
5. SPEAKER
Sounds audio from the calling station. Volume is adjustable with the volume control.
6. POWER INDICATOR
Lights to show that Console power is switched on.
7. VOLUME CONTROL - POWER SWITCH
Switches Console power ON & OFF. Adjusts the volume of the Console’s speaker.
8. MICROPHONE
High-gain microphone monitors audio from the calling station while the Console’s TALK button is
pressed.
9. TALK BUTTON
Press and hold to talk to the selected station.
10. ALL CALL BUTTON
Press and hold to talk to all stations.
11. MUTE SWITCH
When ON, the Console will not sound Doorbell Intercom chime tones or respond to All Call signals.
12. FREQUENCY SWITCH
Selects frequency A or B. All intercoms used in the same system must be set to the same frequency.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
DOORBELL FEATURES
2
8
5
1
6
3
7
4
11
10
9
12
1. MICROPHONE
High-gain microphone monitors audio while the Doorbell’s TALK button is pressed.
2. SPEAKER
Sounds audio from the intercom Console. Volume is adjustable with the volume control (see Item #6).
3. POWER INDICATOR
Lights to show that Doorbell power is on. Doorbell power automatically switches ON when TALK button is
pressed. The power automatically switches OFF 25 seconds after the last intercom communication.
4. DOORBELL-TALK BUTTON
Press to turn ON the Doorbell power and sound the chime at all of the intercom Consoles (Consoles with
their MUTE switch ON will not sound the Doorbell chime). During intercom conversation, press and hold
the DOORBELL-TALK button while speaking.
5. BATTERY CLIPS
For connection to two 9-volt alkaline batteries.
6. VOLUME CONTROL
Sets the volume level of the Doorbell’s speaker.
7. BATTERY DOOR
Slides off rear case to expose the battery compartment, FREQUENCY switch, and STATION switch.
8. MOUNTING PLATE
Mounts the Doorbell to a wall or single-gang outlet box.
9. PROGRAM BUTTON
Press to cause the Doorbell to enter program mode.
10. FREQUENCY SWITCH
Sets the Doorbell to frequency “A” or “B”. All intercoms used in the same system must be set to the same
frequency.
11. STATION SWITCH
Sets the Doorbell to station 4 or 5. When set for station 5, the Doorbell will sound a “ding-dong” chime at
the Console. When set for station 4, the Doorbell will sound a “dong” chime at the Console.
12. CASE LOCKING SCREW
Secures the Doorbell to the mounting plate.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
PREPARE CONSOLE & ANTENNA
PREPARE THE ANTENNA
1
SWING ANTENNA
ALL THE WAY UP
SWING ANTENNA
OUT FROM BOTTOM
OF CASE
FOR TABLE OR SHELF MOUNTING...
POINT ANTENNA
STRAIGHT UP
FROM CASE
FOR WALL MOUNTING...
2
PREPARE CONSOLE AND DOORBELL
LABELS ARE SUPPLIED
TO IDENTIFY STATION
LOCATIONS
FACTORY SETTING:
CONSOLE STATION #1
DOORBELL STATION #5
CONSOLE
DOORBELL
PLUG IN
CONSOLE(S)
TRANSFORMER
CONNECT
DOORBELL(S)
BATTERIES
Download from Www.Somanuals.com. All Manuals Search And Download.
3
WALL MOUNTING THE DOORBELL
NOTE: DO NOT MOUNT THE DOORBELL
UNIT WHERE IT WILL BE EXPOSED
TO EXCESSIVE MOISTURE, DUST,
OR IN DIRECT SUNLIGHT
1
USE MOUNTING
PLATE AND PENCIL
TO MARK SCREW
LOCATIONS
2
ATTACH MOUNTING
PLATE USING THE
SCREWS PROVIDED
3
TILT DOORBELL
INTO MOUNTING
PLATE
4
SECURE DOORBELL TO
MOUNTING PLATE WITH
THE CASE LOCKING SCREW
NOTE: WAIT UNTIL AFTER
ADJUSTING THE DOORBELL
AUDIO VOLUME BEFORE
FULLY TIGHTENING THE
LOCKING SCREW
Download from Www.Somanuals.com. All Manuals Search And Download.
4
WALL MOUNTING THE CONSOLE
NOTE: DO NOT MOUNT THE CONSOLE
OUTDOORS, OR WHERE IT WILL BE
EXPOSED TO EXCESSIVE MOISTURE,
DUST, OR IN DIRECT SUNLIGHT
LEFT SCREW
ROUTE TRANSFORMER
WIRE INTO WIRING SLOT
MARK SCREW
LOCATIONS AND
DRIVE IN SCREWS
LEAVING HEADS
ABOUT 1/4" OUT
MOUNT CONSOLE
ON WALL SCREWS
RIGHT SCREW
Download from Www.Somanuals.com. All Manuals Search And Download.
5
OPERATING THE DOORBELL & CONSOLE
CALLING A CONSOLE FROM A DOORBELL
EXAMPLE: FRONT DOOR IS CALLING KITCHEN
THE VISITOR MAKES THE CALL
1
GREEN POWER
INDICATOR LIGHTS
WHILE DOORBELL
POWER IS ON
THE VISITOR PRESSES THE
DOORBELL-TALK BUTTON
DOORBELL
CALLS
KITCHEN
NOTE: THE CONSOLE
POWER MUST BE ON, AND
THE VOLUME MUST BE
SET ABOVE MINIMUM
FRONT DOOR
DOORBELL
CONSOLE ANNOUNCES THE VISITOR
2
EACH CONSOLE WILL CHIME
A "DING-DONG" (FOR STATION 5, FRONT DOOR)
OR A "DONG" (FOR STATION 4, BACK DOOR)
NOTE: IF A CONSOLE'S MUTE
SWITCH IS "ON", THE DOORBELL
CHIME WILL NOT SOUND
KITCHEN
HEARS
DOORBELL
KITCHEN
CALL
CONSOLE
SEE THE VISITOR'S LOCATION
3
THE CONSOLE WILL INDICATE
THE DOORBELL STATION THAT
CALLED
STATION INDICATOR LIGHTS
TO SHOW WHICH STATION
CALLED
NOTE: A CONSOLE MUST
RESPOND WITHIN 60 SECONDS,
OR THE DOORBELL UNIT WILL
AUTOMATICALLY SHUT OFF
KITCHEN CONSOLE
SHOWS DOORBELL CALL
KITCHEN
CONSOLE
HAVE THE CONVERSATION
4
STATION INDICATOR LIGHTS
WHILE TALKING & LISTENING
RESPOND TO THE VISITOR
BY PRESSING & HOLDING
THE TALK BUTTON WHILE
SPEAKING, RELEASE THE
KITCHEN
TALKS TO
DOORBELL
TALK BUTTON AFTER SPEAKING
(WAIT FOR THE BEEP BEFORE SPEAKING)
THE CONVERSATION GOES BACK AND
FORTH, WITH EACH PERSON PRESSING
THEIR OWN TALK BUTTON
KITCHEN
CONSOLE
NOTE: DOORBELLS WILL GO ON STANDBY
AFTER 60 SECONDS OF SILENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
6
OPERATING MULTIPLE CONSOLES
CALLING ONE CONSOLE FROM ANOTHER CONSOLE
EXAMPLE: GARAGE IS CALLING KITCHEN
STATION
INDICATOR
LIGHTS
CHOOSE WHOM TO CALL
1
WITH CONSOLE POWER ON,
PRESS THE BUTTON FOR THE
CONSOLE THAT YOU WANT TO CALL
(DOORBELLS CAN NOT BE CALLED)
GARAGE
SELECTS
KITCHEN
GARAGE
CONSOLE
STATION
INDICATOR
STAYS LIT
MAKE THE CALL
2
GARAGE
CALLS
KITCHEN
PRESS AND HOLD THE TALK BUTTON,
WAIT FOR THE BEEP, THEN
SPEAK TOWARDS THE CONSOLE
RELEASE THE TALK BUTTON
WHEN YOU ARE FINISHED TALKING
GARAGE
CONSOLE
WAIT FOR RESPONSE
3
STATION INDICATOR
LIGHTS TO SHOW WHICH
STATION CALLED
THE CONSOLE CALLED
WILL SOUND THE MESSAGE
THE CALLER THEN WAITS
FOR THE PERSON TO RESPOND
KITCHEN
HEARS
GARAGE
KITCHEN
CONSOLE
HAVE THE CONVERSATION
4
STATION INDICATOR LIGHTS
WHILE TALKING & LISTENING
RESPOND TO THE CALLER
BY PRESSING & HOLDING
THE TALK BUTTON WHILE
SPEAKING, RELEASE THE
TALK BUTTON AFTER SPEAKING
KITCHEN
TALKS TO
GARAGE
(WAIT FOR THE BEEP BEFORE SPEAKING)
THE CONVERSATION GOES BACK AND
FORTH, WITH EACH PERSON PRESSING
THEIR OWN TALK BUTTON
KITCHEN
CONSOLE
NOTE: CONSOLES WILL GO ON STANDBY
AFTER 60 SECONDS OF SILENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CALLING MULTIPLE CONSOLES
CALLING ALL CONSOLES
EXAMPLE: KITCHEN IS CALLING EVERYONE
CHOOSE STATION ALL-CALL
1
ALL STATION
INDICATORS
LIGHT
HOLD THE ALL CALL BUTTON,
WAIT FOR THE BEEP. SPEAK
TOWARDS THE CONSOLE
RELEASE THE ALL CALL BUTTON
WHEN YOU ARE FINISHED TALKING
NOTE: ANY CONSOLE WITH ITS MUTE
SWITCH ON AND ANY DOORBELL UNITS
THAT HAVE NOT BEEN USED IN THE PRIOR
KITCHEN
CONSOLE
60 SECONDS WILL NOT RECEIVE THE
KITCHEN
ALL-CALL MESSAGE
CALLS ALL
STATIONS
WAIT FOR RESPONSE
2
STATION INDICATOR
LIGHTS TO SHOW WHICH
STATION CALLED
ALL CONSOLES THAT RECEIVED THE
ALL-CALL MESSAGE WILL SOUND THE
MESSAGE
THE CALLER THEN WAITS
FOR A PERSON TO RESPOND
NOTE: THE CONSOLES CALLED HAVE
60 SECONDS TO RESPOND, OR THE
CALL WILL BE CANCELED
GARAGE HEARS
KITCHEN CALL
GARAGE
CONSOLE
3
HAVE THE CONVERSATION
STATION INDICATOR LIGHTS
WHILE TALKING AND LISTENING
RESPOND TO THE CALLER
BY PRESSING & HOLDING
THE ALL CALL BUTTON WHILE
SPEAKING, RELEASE THE ALL
CALL BUTTON AFTER SPEAKING
(WAIT FOR BEEP BEFORE TALKING)
THE CONVERSATION GOES BACK AND
FORTH, WITH EACH PERSON PRESSING
THEIR OWN ALL CALL BUTTON
CONSOLES WILL GO ON STANDBY
AFTER 60 SECONDS OF NO TALKING
GARAGE
CONSOLE
GARAGE TALKS
TO KITCHEN
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ADJUSTING THE DOORBELL’S VOLUME
THE DOORBELL'S VOLUME
CAN BE ADJUSTED TO
SUIT THE INSTALLATION
HAVE SOMEONE TALK TO
THE DOORBELL FROM THE
CONSOLE WHILE ADJUSTING
THE DOORBELL'S VOLUME
USE A SMALL SCREWDRIVER
TO ADJUST THE VOLUME
CONTROL
DOORBELL
VOLUME
LOW
HIGH
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CHANGING A CONSOLE’S SETTINGS
TO CHANGE A CONSOLE OR
ADD A NEW CONSOLE,
PREPARE THE CONSOLE
FOR PROGRAMMING
NOTE: UNITS ARE PRE-SET AT THE FACTORY
WITH THE SAME HOUSE CODE, CHANGING
THE HOUSE CODE IS ONLY NECESSARY
WHEN ADDING ADDITIONAL UNITS OR TO
AVOID OVERLAP WITH OTHER SYSTEMS
1
THE FACTORY SETTING FOR THE FREQUENCY
SWITCH IS "A", SET THE FREQUENCY SWITCHES
TO MATCH ON ALL CONSOLES (ALL EITHER "A" OR "B")
1. START WITH THE POWER OFF (VOLUME KNOB OFF)
2. PRESS & HOLD DOWN "ALL CALL" & "TALK" BUTTONS
3. TURN POWER ON (TURN VOLUME KNOB ON HALFWAY)
4. WHEN ALL STATION LIGHTS FLASH, RELEASE THE BUTTONS
SET THE MUTE SWITCH TO
OFF WHILE PROGRAMMING
SET THE CONSOLE'S STATION NUMBER
2
SETTING THE
CONSOLE'S
STATION
NUMBER
1. PRESS A NUMBER BUTTON TO SET THE CONSOLE'S
STATION NUMBER (SELECT A DIFFERENT STATION
NUMBER FOR EACH CONSOLE)
2. THE SELECTED STATION NUMBER INDICATOR
WILL FLASH
NOTE: TO EXIT PROGRAMMING WITHOUT
CHANGING THE HOUSE CODE NUMBER,
PRESS THE TALK BUTTON TWICE
SET THE CONSOLE'S NEW HOUSE CODE NUMBER
3
NOTE: ALL UNITS MUST BE SET TO
THE SAME HOUSE CODE NUMBER
TALK BUTTON MAKES
THE CONSOLE SOUND
THE EXISTING HOUSE
CODE NUMBER
ALL CALL BUTTON
ENTERS THE NEW
HOUSE CODE
NUMBER
FACTORY SETTING:
HOUSE CODE = 10
1. PRESS THE ALL CALL BUTTON 1 TO 15 TIMES
TO SET THE NEW HOUSE CODE NUMBER
1. PRESS AND RELEASE THE TALK BUTTON
2. THE CONSOLE WILL BEEP, COUNTING THE NEW
HOUSE CODE NUMBER
2. THE CONSOLE WILL BEEP, COUNTING THE
EXISTING HOUSE CODE NUMBER
3. PRESS THE TALK BUTTON TO EXIT PROGRAM MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
10
CHANGING A DOORBELL’S SETTINGS
NOTE: UNITS ARE PRE-SET AT THE FACTORY
WITH THE SAME HOUSE CODE, CHANGING
THE HOUSE CODE IS ONLY NECESSARY
WHEN ADDING ADDITIONAL UNITS OR TO
AVOID OVERLAP WITH OTHER SYSTEMS
TO CHANGE A DOORBELL
OR ADD A NEW DOORBELL
1
THE FACTORY SETTING FOR THE FREQUENCY
SWITCH IS "A", SET THE FREQUENCY SWITCH
TO MATCH THE CONSOLE (EITHER "A" OR "B")
THE FACTORY SETTING FOR THE STATION SWITCH
IS "5", SET THE STATION SWITCH TO EITHER "4" OR "5"
A
CHIME SOUND:
5 = "DING-DONG"
4 = "DONG"
B
4
5
PLACE THE DOORBELL INTO PROGRAM MODE
AND COUNT THE EXISTING HOUSE CODE NUMBER BEEPS
2
PROGRAM
BUTTON
INSIDE HOLE
1. BE SURE THE GREEN POWER LIGHT
IS OFF (IF THE LIGHT IS ON, WAIT ABOUT
2 MINUTES)
2. USE AN OBJECT TO PRESS AND HOLD
THE PROGRAM BUTTON UNTIL A BEEP
SOUNDS
3. RELEASE THE PROGRAM BUTTON
(BE READY TO COUNT BEEPS)
4. THE DOORBELL WILL BEEP, COUNTING
THE EXISTING HOUSE CODE NUMBER
DOORBELL BEEPS THE
EXISTING HOUSE CODE
NUMBER
FACTORY SETTING:
HOUSE CODE = 10
SET THE DOORBELL'S NEW HOUSE CODE NUMBER
3
NOTE: ALL UNITS MUST BE SET TO
THE SAME HOUSE CODE NUMBER
1. PRESS THE TALK BUTTON
1 TO 15 TIMES TO SET THE
NEW HOUSE CODE NUMBER
3. PRESS THE PROGRAM
BUTTON TO EXIT
PROGRAM MODE
2. THE DOORBELL WILL BEEP,
COUNTING THE NEW HOUSE
CODE NUMBER
DOORBELL BEEPS THE
NEW HOUSE CODE
NUMBER
Download from Www.Somanuals.com. All Manuals Search And Download.
11
TROUBLESHOOTING
SYMPTOM
REMEDY
BE SURE THE CONSOLE
TRANSFORMER IS PLUGGED INTO AN
UN-SWITCHED OUTLET
POWER INDICATOR WILL NOT LIGHT
BE SURE THE DOORBELL UNIT HAS
FRESH 9-VOLT ALKALINE BATTERIES
KEEP CONSOLE AWAY FROM
FLUORESCENT LIGHTS
EXCESSIVE HUM FROM THE SPEAKER
SYSTEM FAILS TO WORK AT DISTANCE
MOVE DOORBELL UNIT IF IT IS NEAR
AN AC LINE
BE SURE THE CONSOLE ANTENNA IS
POINTED UP
MOVE UNITS AROUND TO DETERMINE
BETTER RECEPTION LOCATIONS
CHANGE THE FREQUENCY SWITCHES
ON EACH UNIT (ALL UNITS MUST BE
ON THE SAME FREQUENCY)
SYSTEM RECEIVES VOICE SIGNALS
FROM NON-RELATED EQUIPMENT
CHANGE THE HOUSE CODE
MOVE UNITS AWAY FROM
COMPUTERS, ELECTRIC MOTORS,
LIGHT DIMMER SWITCHES, ETC.
SYSTEM RECEIVES ELECTRICAL
NOISE
PERFORM THE SYSTEM
PROGRAMMING AGAIN
SYSTEM FAILS TO FUNCTION
MOVE UNITS AWAY FROM METAL
OBJECTS
BE SURE THAT THERE IS AT LEAST 6
FEET SPACING BETWEEN UNITS
SYSTEM FUNCTIONS ERRATICALLY
Download from Www.Somanuals.com. All Manuals Search And Download.
12
IMPORTANT FCC NOTICE
Radio controls provide a reliable communications link and fill an important need
in portable wireless signaling. However, there are some limitations which must be
observed.
• For U.S. installations only: The radios are required to comply with FCC Rules
and Regulations as Part 15 and FRS Part 95 devices. As such, they have limited
transmitter power and therefore limited range.
• A receiver cannot respond to more than one transmitted signal at a time
and may be blocked by radio signals that occur on or near their operating
frequencies, regardless of code settings.
• Changes or modifications to the device may void FCC compliance.
• Infrequently used radio links should be tested regularly to protect against
undetected interference or fault.
• A general knowledge of radio and its vagaries should be gained prior to acting
as a wholesale distributor or dealer, and these facts should be communicated
to the ultimate users.
• This device complies with FCC Part 15 and FRS Part 95 Rules and Regulations.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Copyright © 2003 Linear Corporation
214601 C
Download from Www.Somanuals.com. All Manuals Search And Download.
|