USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
LTV-19w6
Widescreen LCD TV
TV LCD à Écran Géant
TV LCD Pantalla Grande
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Read carefully and follow all warnings and instructions in this User's Manual and those
marked on the product before you operate your television. Failure to follow warnings can
result in personal injury or damage to product. Keep this User’s Manual in a convenient
location for future reference.
Proper Positioning of Television
Always handle your LCD television with care. Avoid touching the LCD screen. Skin oils are
difficult to remove.
Always position your LCD television on a stable and level surface. Unstable surfaces can
cause your LCD to topple and fall, resulting in possible damage or injury.
Avoid exposing the LCD display to direct sunlight or high temperatures, which can damage or
shorten its useful life. Do not place near heat sources such as radiators, heat registers, or
other appliances that generate heat.
Avoid exposing the LCD display to rain, water, moisture or high humidity. Do not place your
LCD near basins or sinks where it may come in contact with water.
Orient your LCD display away from direct sunlight to reduce glare.
Never place heavy or sharp objects on the LCD display, video cable, or power cord.
Overloading Outlets
Do not overload electrical power sources when installing television. Overloading wall outlets,
circuits, or extension cords can result in overheating, fire, or electric shock. Use only
grounded or polarized outlets.
Power Cord Protection
Minimize wear on power supply cords. Power supply cords should be routed away from foot
traffic and contact with other objects. Do not route power cord under rugs or carpeting.
The cord should never be severely bent, pinched, or twisted. Periodically inspect power
cords for wear or damage, particularly near plug and the point where it exits from the product.
Unplug cord and discontinue use if damage is discovered.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the product and to protect it from overheating, these openings must not be
blocked or covered. Keep the LCD TV a minimum of four (4) inches away from any wall to
assure sufficient airflow and ventilation. Increased temperatures may cause fire or device
failure.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa,
rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an
enclosed rack, unless proper ventilation is provided.
Other Notices and Precautions
Caution: Never remove the rear cover. There are no user serviceable parts inside. Your
LCD TV contains high-voltage parts. You may be seriously injured if you touch them.
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by
anyone not authorized by Westinghouse Digital. Refer all servicing and repairs to qualified
service personnel.
If smoke, abnormal noise, or strange odor is present, immediately unplug the power cord.
Contact a qualified service technician
If your LCD TV will not be used for extended periods of time, unplug the power cord and
remove the batteries from the remote control.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Safety
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable
system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
Lightning
For added protection for the LCD TV during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges. Do not disconnect the
antenna or the power cord during a heavy storm – lightning may strike while you are holding the cable
cord, causing serious injury. Turn off your LCD display and wait for the weather to improve.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them may be fatal.
Cleaning the LCD TV
ʳ
x
x
MAKE SURE THE LCD TV IS TURNED OFF
NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner
onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the
LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or
LCD display case. Westinghouse Digital will not be liable for damage resulting from use of any
ammonia or alcohol-based cleaners.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Guidelines
Warning: This device must be operated with the original power supply.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for
the individual country. Some examples are listed below:
USA...............…UL
Canada.............CSA
Germany……….VDE
Switzerland……SEV
Britain ...........…BASE/BS
Japan ...............Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination
and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original
cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
For units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the
floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your
unit. Please consult the table below for the selection criteria for power cords used in the United States and
Canada.
Cord Type
Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
SVT
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and may cause harmful interference to radio
communications if not installed and used in accordance with the instructions. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
x Reorient or relocate the receiving antenna.
x Increase the separation between the equipment and receiver.
x Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
x Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded
BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital
will void the user's authority to operate this device.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and
practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb
WSXGA+ computer monitor —making it a practical solution for tight spaces in the office,
bedroom, or kitchen. Watch television, play video games, e-mail, or surf the Internet.
Package Contents
Your LCD TV package includes:
x
x
x
x
x
x
x
19” widescreen LCD TV
Detachable Base Stand
Remote Control (2 AAA batteries are included)
AC Power Cord
D-Sub (VGA) Cable
3.5mm Mini-Jack Audio Cable
Literature
o
o
o
Quick Connect Guide
User’s Manual
Warranty Card
Important
Save the original box and all packing material for future shipping needs.
1. Insert Remote Control Batteries
x Remove the battery cover.
x Insert two “AAA” batteries.
x Re-attach the battery cover.
CAUTION
x
x
Only use AAA batteries as specified.
Do not mix new and old batteries. This may result in
cracking or leakage, which may pose a fire risk or lead
to personal injury.
x
Insert batteries according to (+) and (í) markings.
Inserting the batteries incorrectly may result in
cracking or leakage, which may pose a fire risk or lead
to personal injury.
Dispose of the battery in accordance with local laws
and regulations.
x
x
x
Keep the battery away from children and pets.
When the remote control will not be used for an
extended period, remove the batteries.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach Base Stand to LCD TV
Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap
the base stand into place.
Detachable Base Stand
To detach the base stand, just press on the locking tabs on the bottom of the base stand and
remove the base stand from the stand neck.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA
Cables
Connect video and audio cables from compatible devices to the back panel of the LCD TV.
Video Inputs
PC Inputs
Video Inputs
PC Inputs
S- Video
Audio-R
Audio-L
Video
DVI
YPbPr
Antenna
D-Sub (VGA)
Audio-In
Audio-Out
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and
Video source input connectors.
Connecting a computer to the LCD TV:
IMPORTANT: Before you begin, make sure the computer and TV are turned off.
Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV.
D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port
to the D-Sub input connection. Connect a 3.5mm stereo mini-cable from the computer’s
AUDIO OUT port to the AUDIO IN port on the LCD TV.
DVI-D CONNECTION: Connect a Digital DVI cable from your computer to the DVI-D input
connection. Connect a 3.5mm stereo mini-cable from the computer’s AUDIO OUT port to the
AUDIO IN port on the LCD TV.
After you turn on the computer, the TV will automatically adjust to the resolution of the
computer. Set the computer timing mode to 1440 x 900 at 60Hz, then turn off and reboot the
computer. Refer to your computer’s graphic card user guide for questions on how to set this
timing mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect Power Cable
Connect the power cord to the back of the LCD TV and then into a properly grounded AC
outlet.
5. Turn Power On
Press the power button on the right side of the LCD TV or on the remote control to turn on the
TV.
Power Button
Remote Power Button
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Programming TV Channels
1. Select TV as the source input using the Source button on the remote control.
2. Press the Menu button to display the OSD Display Menu.
3. Use the CHŸ/źarrow keys to highlight the TV Menu.
4. Using the Vol Ź arrow keys select the TV sub-menu. Use the ź to highlight the CH
Auto Scan function. Press Vol Ź arrow key and Channel Auto Scan will be performed.
5. Once the CH Auto Scan is complete, switch channels by using the CH Ÿ/ź arrow keys
on the remote.
6. To Add/Erase channels use the ź to highlight the CH Edit function. Use the Ź, or Ż
to add or erase the selected channel.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Connections
This section describes the keypad panel controls, and remote control in more detail.
Front View of the Product
Use the buttons on the right side keypad control to display and adjust the On Screen Display
(OSD). The OSD controls are explained at the next page and are defined in the “OSD
Functions” section.
IR Receiver
Keypad Controls
Speakers
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Side Keypad Controls
1
3
5
Button
1
Mode
CH+
TV Source
Channel up
OSD Menu
Navigate up
2
3
Channel down
Volume down
Navigate down
Decrease value
CH-
Vol-
Vol+
4
Volume up
Increase value
Press and hold for 2 seconds to
5
6
Menu/Source access the OSD menu. Press
and release to change source.
Enter/Exit Menu
TV ON or OFF
Power
TV ON or OFF
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1. Mute
Turn audio on and off.
2. MTS (Multi-channel TV Sound)
Stereo, Mono and SAP sound selection
3. Power
1
2
5
3
4
Switch the power on and off.
4. Sleep
Automatically turn off the TV after a set
time.
6
7
5. Display
9
Display the channel information.
6. PIP
Available in D-Sub/DVI Modes; to turn PIP
picture on & off and select PIP picture size.
7. PIP Menu
8
10
11
Used to navigate through the PIP OSD
menu and control audio swap.
8. Return
12
13
14
Recall the previous channel.
9. CHANNEL NUMBER KEY 0-9, 100
Direct channel selection by number
10.V-Chip
15
16
Set Parental and Movie Rating to Block or
Un-Block. Navigate through OSD menus.
Pin Code is also set here.
11.CHŸ/ź
17
Channel Up/Down adjustment; also
available on key controls and OSD menu.
12.Source
Push to select input source.
13.MENU
Press to enter the OSD Menu.
14.VolŻ/Ź
Volume Up/Down adjustment; also
available on key controls and OSD menu
control. If the OSD menu is displayed, scroll
down in OSD Menus.
15.CC
Set Closed Caption and Text modes toggle
through OFF, CC1, CC2, CC3 etc.
16.Scaling
Push to change picture aspect ratio to
Normal, Zoom, or Full.
17.Exit
Exit the OSD menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Functions
This section describes each on-screen display (OSD) command. There are different OSD
menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI)
mode.
All the function settings for your LCD TV are controlled either via the remote control or using
the control keys located on the right side of the LCD TV. To display the OSD main menu,
press and hold the Menu button on the control keys or the MENU key on the remote control.
Use the Ÿ/ź arrow keys to navigate within the menu. The Ż/Ź arrow keys are used to
change the values of the functions that are selected in the OSD menu. The EXIT key on the
remote control or Menu button on the control keys allows you to exit out of the OSD menus
and functions.
Enter OSD Menus by
pressing MENU key
TV OSD Menu
Image Menu
In the Image Menu use the VolŹ button to select image the
sub-menu. Use the CHŸ/ź buttons to highlight the function.
Then use the VolŻ/Ź arrow keys to change the values of the
function in the OSD menu.
Function Name
Explanation
Brightness
Brightness adjustment
Contrast adjustment
Video Sharpness adjustment
Color Levels adjustment
Video Hue adjustment
Contrast
Sharpness
Color
Hue
DLC
Back Light
Turn Dynamic Luminance Control On or Off
Backlight from 0-100 adjustment
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Menu
In the Audio Menu use the VolŹ button to select the Audio sub-menu. Use the CHŸ/ź
buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the values of
the function in the OSD menu.
Function Name
Explanation
Volume
Volume adjustment
Turn Audio Off and On
Treble adjustment
Bass adjustment
Left to Right Audio adjustment
Mute
Treble
Bass
Balance
MTS
Multi-channel Television Sound, select SAP, MONO, or STEREO
Color Menu
In the Color Menu use the VolŹ button to select the Color sub-menu. Use the CHŸ/ź
buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the values of
the function in the OSD menu.
Function Name
Explanation
Color Temp.
Color temperature adjustment
Red level adjustment
Green level adjustment
Blue level adjustment
Red
Green
Blue
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
In the TV Menu, use the VolŹ button to select the TV sub-menu. Use the CHŸ/ź buttons to
highlight the function. Then use the VolŻ/Ź arrow keys to change the values of the function
in the OSD menu.
Function Name
Explanation
Tuner System
Select between STD, HRC, IRC, Air (Depending on your local area)
Start to scan channel after pressing right or left key, and stop scan if any key is
pressed.
CH. Auto Scan
CH. Fine Tune
Blue Screen
CH. No
CH. Edit
C.C.
Tune channel from 0-100
Toggle between video blanking to blue between channel changes – default is No
Current channel
Select the channel to Edit using Ż/Ź arrow keys
Closed Caption Display
Miscellaneous Menu
In the Miscellaneous Menu, use the VolŹ button to select the “Misc” sub-menu. Use the
CHŸ/ź buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the
values of the function in the OSD menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Name
Explanation
Language
English, Chinese, French, Spanish
OSD Transparency
OSD Time-out
OSD Position
Reset
Sleep
Aspect Ratio
Set OSD transparency level
Set the time to turn off the OSD automatically
OSD horizontal/vertical position adjustment
Restore factory default settings
Set the Sleep timer for 30, 45, 60, 90, or 120 minutes
Set the display to Full, Normal, or Zoom (Can only change with an active signal)
V-Chip and Parental Control Menu
To access the PARENTAL CONTROL menu press the V-Chip button located on the remote
control. Enter the Pin Code (default is 0000).
To change the Pin Code, enter new Password and confirm new Password is set.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating Menus
Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the
PIN code. Use the ź button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the Ź
button to select the sub-menu. Use the Ÿ/ź buttons to highlight the Movie/TV Rating to be
blocked or un-blocked. Press the MENU button to lock and unlock the highlighted rating.
Press EXIT to exit the V-chip menu.
Function Name
Explanation
MOVIE RATING G:
PG:
General audience
Parental Guidance suggested
PG 13: Parents strongly cautioned
R:
Restricted
NC 17: No one 17 and under admitted
X:
Adult audience only
<<< AGE >>>
TV RATING
Y:
All Children
Y7:
G:
Directed to Older Children
General Audience
PG:
14:
MA:
Parental Guidance Suggested
Parents Strongly Cautioned
Mature Audience Only
Video OSD Menu
The Video (Video/S-Video/YPbPr) OSD Menu has the same OSD features as the TV OSD
except for the TV sub-menu functions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PC OSD Menu
Image Menu
In the Image Menu use the VolŹ button to select image sub-menu. Use the CHŸ/ź buttons
to highlight function. Then use the VolŻ/Ź arrow keys to change the values of the function
in the OSD menu.
Function Name
Explanation
Brightness
Contrast
Brightness adjustment. Default value is 100.
Contrast adjustment. Default value is 50.
Adjust picture sharpness from 1 – 5. Default value is 2.
Adjust the Clock timing. Default value is 50.
Adjust the Video Hue level. Default value is 55.
Adjust OSD on horizontal position. Default value is 50.
Adjust OSD on vertical position. Default value is 50.
Adjust automatically the picture and synch the LCD TV
monitor
Sharpness
Clock
Phase
H-POSITION
V-POSITION
Auto-Config
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Menu
In the Audio Menu use the VolŹ button to select the Audio sub-menu. Use the CHŸ/ź
buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the values of
the function in the OSD menu.
Function Name
Explanation
Volume
Volume adjustment
Turn Audio Off and On
Treble adjustment
Bass adjustment
Left to Right Audio adjustment
Mute
Treble
Bass
Balance
Color Temp Menu
In the Color Temperature Menu, use the VolŹ button to select Color Temp sub-menu. Use
the CHŸ/ź buttons to highlight function. Then use the VolŻ/Ź arrow keys to change the
values of the function in the OSD menu
Function Name
Explanation
Color Temp.
Color temperature adjustment
Red Temp adjustment
Green Temp adjustment
Blue Temp adjustment
Red
Green
Blue
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous Menu
In the Miscellaneous Menu, use the VolŹ button to select the “Misc” sub-menu. Use the
CHŸ/ź buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the
values of the function in the OSD menu.
Function Name
Explanation
Language
English, Chinese, French, Spanish
OSD Transparency
OSD Time-out
OSD Position
Reset
Auto Setting
PIP Menu
Set OSD transparency level
Set the time to turn off the OSD automatically
OSD horizontal/vertical position adjustment
Restore factory default settings
Automatically configure TV with PC
Access PIP Menu
INFO Menu
Display system information.
PC DVI OSD Menu
PC OSD Menu for DVI Source has the same features as PC D-Sub except, only Brightness,
Contrast, and Sharpness can be adjusted in the Image sub-Menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP Function Menu
Picture In Picture (PIP) is available in D-Sub, DVI, modes only. Use the VolŹ button to select
the PIP Function sub-menu. Use either the Ÿ/ź arrow keys to navigate within the menu.
Then use the VolŻ/Ź arrow keys to change the values of the function in the OSD menu.
The Exit button on the remote control will allow you to back out of the OSD menu.
Function Name
Explanation
Turn PIP Sub-screen off or change to Small, Medium or Large
Select from S-Video, Video, or TV
Select audio source Main or Sub. If you set the audio source to Sub and turn off
PIP, you can still listen to the Sub Audio.
Mode
Source
Audio
Position (PIP Sub-Screen) PIP Sub-screen horizontal/vertical position adjustment
Auto Adjustment
Pressing the EXIT button on the remote control while in analog PC (D-sub) mode will
automatically adjust the picture and synch the LCD TV monitor.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Source not found or Out of Range
If there is no source connected to the Input selected (TV, Video, S-Video, YPbPr, DVI, or
D-Sub), the following will be displayed:
If the signal source is DVI or D-Sub mode and the Display settings are not compatible with, or
are out of range of the LCD TV, the following will be displayed:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Preliminary Product Specification
19” wide screen Color TFT LCD. Anti-static and hard coated.
Panel Size/Type
Native/Optimum Resolution
Aspect Ratio
1440 x 900
16:10
Viewing Angle
Horizontal: 150q
Vertical: 130q (typical)
Display Colors
16.2 million colors
Active Display Area
PC Compatibility
16.07” (H) x 10.05” (V); 19-inch wide diagonal
VGA, SVGA, XGA, SXGA, WSXGA+
1440 x 900, 60Hz (preferred timing)
Video Compatibility (Video, S-Video, NTSC, PAL, 480p, 576p, 720p ,1080i
YPbPr)
Tuner Compatibility
Video Features
NTSC, Air, CATV (STD/HRC/IRC)
Progressive scan
Motion adaptive 3D de-interlacing
3D noise reduction
Inverse 3:2 pull down
Aspect Ratio Adjustment (Normal/Full/Zoom)
Dynamic Luminance Control (DLC) Function
Video Enhancement (Brightness/Contrast/Sharpness/Saturation/Hue)
Picture-in-Picture in D-Sub/DVI mode
Audio Features
Built-in audio amplifier and speakers; 1.5 watts (max.) output x 2 channels
Mute
Multi-channel television sound (MTS)
Closed Caption, V-Chip, Sleep timer
Other Features
Input Connectors
Input 1: 1 S-Video
Input 2: 1 Video
Input 3: 1 YPbPr
Rear:
Input 4: 1 Audio-L*, Audio-R* (RCA, Left and right stereo audio)
Input 5: 1 Tuner antenna
Input 6: 1 DVI-D
Input 7: 1 D-Sub
Input 8: 1 3.5mm Mini-Jack for Stereo audio line in
Output Connectors
Remote Control Unit
Accessory/Cables
Rear:
1 3.5mm Mini-Jack for Stereo audio line out
Infrared Remote Control
Infrared Remote Control
Power Cord
D-Sub (VGA) Cable
3.5mm Mini-Jack Audio Cable
: 18.85” x 16.1” x 5.23”
Dimensions (w x h x d) inches
Weight
Unit with base
Unit without base
Carton Dimensions
: 18.85” x 14.76” x 3.24 ”
: 21.65” x 18.5” x 6.69”
: 11.7 lbs.
Unit Weight
Gross Shipping Weight
: 14.6 lbs
AC Power Input Range
Regulatory Approvals
Lamp Life Time
100~240VAC, 50/60Hz, 1.5 amps, universal
FCC-B, UL, CSA (CUL)
40,000 hours
Environmental Conditions
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Storage Altitude
:
:
:
:
:
:
5qC to 35qC
-20qC to 55qC
20 to 80% (no condensation)
20 to 85% (no condensation)
3,000 m
12,000 m
* Note: The audio input is shared between YPbPr, Video, and S-Video.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
x Make sure AC cord is plugged into the back of the LCD TV.
x Make sure AC power cord is securely connected to the AC socket.
x Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Power is ON but no screen image
x Adjust brightness and contrast.
x Check Source settings.
Wrong or abnormal colors
x If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an
improper connection.
x The red connector for right audio is easily confused with the red Pr connector in YPbPr
component video input. Double check that they are correctly attached.
x Remove distribution amplifiers from the signal path.
Snow appears on screen
x Check your antenna connection.
x Remove unnecessary signal splitters to improve signal quality.
x Replace poor or worn cables to properly match 75 ohm impedance.
x Check TV / CATV selection.
No sound
x Check your audio connection.
x Press MUTE on the remote control again, so that MUTE disappears from the screen.
x Check your audio settings; your TV audio may be set to SAP.
x Press the VolŹ key on your remote control.
x Make sure that headphones are not connected.
Remote control does not work
x Make sure the batteries are inserted correctly.
x Replace old or worn batteries.
Remote control code not found in “universal” remote
x Purchase a separate “learning” remote control.
How do I find more help?
x Contact customer service at (866) 287-5555 or [email protected].
ʳ
© 2006 Westinghouse Digital Electronics, LLC. All rights reserved. Specifications subject to change without notice.
Westinghouse and You can be sure... if it’s Westinghouse are trademarks of Westinghouse Electric Corporation and are used
under license.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Westinghouse Digital Electronics
Santa Fe Springs, CA
SE-UM-1907-0601
Download from Www.Somanuals.com. All Manuals Search And Download.
Westinghouse Digital Electronics
Comienzo Aquí
Démarre Entière
Start Here
LTV-19w6 LCD TV
ANT/YPbPr/S-Video/
Video Inputs
D-Sub/DVI-D Inputs
Keypad: Power &
Menu Controls
DID YOU KNOW THAT
SAVIEZ-VOUS QUE
¿SABÍA USTED QUE SU TELEVISOR CON
PANTALLA DE CRISTAL LÍQUIDO TAMBIÉN TIENE:
• Fácil acceso lateral a los conectores a través del innovador
diseño espinal
YOUR LCD TV ALSO HAS:
VOTRE TV LCD EST AUSSI MUNIE:
• Easy side access to connectors through innovative
SpineDesign®
• Conception innovante pour faciliter l’accès latéral aux connecteurs
CHECK OUT
CONSULTEZ
CONSULTE
• Complete line of TV’s and desktop monitors
• Ligne complète d’écrans TV et d’ordinateurs
•Línea completa de pantallas de televisiones y de computadoras
Quick Install Guide
CONGRATULATIONS on purchasing a Westinghouse LCD TV! This Quick Connect Guide will help you get
started in 3 easy steps. For complete installation, usage instructions, and safety precautions please refer to the User’s Manual.
PLUG IN THE TV
VIDEO SOURCE SETUP
COMPUTER SETUP
Plug in the TV to a properly
grounded power outlet. Insert
batteries into the remote control.
Connect either cable or TV
antenna wire to the cable-ready
NTSC tuner input labeled “ANT”
on the connection panel.
Connect a computer to the D-Sub or
DVI-D input and the corresponding
Audio-In input.
GO!
3
1
2
You are now ready to enjoy your
new Westinghouse LCD TV. Press
the power button on the keypad or
remote control to turn the TV on.
MAXIMIZE YOUR LCD TV EXPERIENCE You can attach your LCD TV to a variety of electronic devices
including a cable or satellite set top box, a game console, a VCR, or a computer. The chart shows our
recommendations for the best quality picture for these commonly used devices.
S-Video Input
Audio-R
Audio-L
Video
VIDEO INPUTS
PC INPUTS
DVI-D
ANT
Video S-Video
YPbPr
D-Sub
(VGA)
DVI
Cable/
Satellite Receiver
Good
Good Better
Good Better
Better
Best
Monitor
Good
Better
DVD Player
Game Console
VCR
YPbPr
Best
Good Better
Best
•
Remember to adjust the resolution of your
computer to 1440 x 900 for best performance.
Note: The audio input is shared between YPbPr, Video and S-Video
D-Sub (VGA)
Antenna
Audio In
Audio Out
TYPICAL SETUP
• DVD player with YPbPr input
• Game console action using S-Video input
• VCR viewing and editing with Video input
Use the input button on the remote control or keypad to
navigate between the TV, D-Sub, DVI, YPbPr, S-Video or
Video inputs.
© 2006 Westinghouse Digital Electronics, LLC. All rights reserved. Specifications subject to change without
notice. ¼, Westinghouse and You can be sure... if it's Westinghouse are trademarks of Westinghouse Electric
Corporation and are used under license. MA-PS-0120-0601
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide de Connexion Rapide
FELICITATIONS pour votre achat d’une LCD HDTV! Ce Guide de Connexion Rapide vous aidera à démarrer en
trois étapes simples. Pour une installation complète, des instructions d’utilisation, et des précautions de sûreté
veuillez vous rapporter au Guide de l’Utilisateur.
BRANCHEZ LA TV
Branchez la TV à une prise cor-
INSTALLATION VIDEO
SOURCE
INSTALLATION DE
L’ORDINATEUR
Connectez un ordinateur à
l’entrée D-Sub ou DVI-D et
l’entrée Audio-In correspondante.
COMMENCEZ!
Vous êtes maintenant prêt pour
apprécier votre nouvelle TV LCD
Westinghouse. Appuyez sur la tou-
che power [marche] sur le clavier à
touches ou sur la télécommande pour
mettre en marche la TV .
1 2 3
rectement mise à terre. Insérez
les piles de la télécommande.
Connectez le câble ou le fil
d’antenne de la TV à l’entrée du
syntoniseur NTSC étiquetée «ANT»
sur le panneau de branchement.
OPTIMISEZ VOTRE EXPERIENCE TV LCD Vous pouvez raccorder votre téléviseur LCD à une
multitude d’appareils électroniques, y compris un boîtier décodeur pour câblodistribution ou satellite, une
console de jeu, un magnétoscope, ou un ordinateur. Le tableau montre nos recommandations pour une
image de qualité supérieure avec ces appareils d’utilisation commune.
Entrée S-Video
Audio-R
ENTRÉES VIDÉO
ENTRÉES PC
Audio-L
DVI-D
ANT
Vidéo S-Vidéo YPbPr
D-Sub
(VGA)
DVI
Video
Décodeur de
câblodistribution
/satellite
Bien
Mieux
Moniteur
Bien
Mieux
Lecteur de DVD
Console de jeu
Magnétoscope
Bien
Bien
Mieux Meilleur
Mieux Meilleur
YPbPr
•
Réglez la résolution de l’ordinateur à 1440 x 900
Bien Mieux Meilleur
Remarque : L’entrée audio est partagée entre YPbPr, Vidéo et S-Vidéo
D-Sub (VGA)
Antenne
Utilisez la touche d’entrée sur la télécommande ou le
clavier pour naviguer entre les entrées TV, D-Sub, DVI,
YPbPr, Vidéo ou S-Vidéo.
MISE EN PLACE TYPIQUE
• Lecteur DVD avec entrée YPbPr
• Console de jeux raccordée à une entrée S-Video
• Magnétoscope raccordé à l’entrée vidéo pour lecture
et montage vidéo
Entrée Audio
Sortie Audio
© 2006 Westinghouse Digital Electronics, L.L.C. Tous droits réservés. Spécifications assujetties à des changements
sans préavis. ¼, Westinghouse et Vous pouvez rester tranquilles…si c’est Westinghouse sont des marques de
Westinghouse Electric Corporation et sont utilisées sous licence. MA-PS-0120-0601
Guía De Conexión Rápida
¡FELICITACIONES por comprar un televisor con pantalla de cristal líquido! Esta Guía de Conexión Rápida le va a ayudar a
conectarlo en tres sencillos pasos. Para ver las instrucciones completas de instalación y de uso, así como las precauciones de
seguridad, por favor consulte el Manual del Usuario.
CONECTE EL TELEVISOR
CONECTAR DE LA
FUENTE DE VIDÉO
Conecte el cordón ya sea del
cable o de la antena del televisor
en la entrada sintonizador NTC
para conectar el cable, que tiene
la etiqueta “ANT” en el panel de
conexión.
CONECTAR LA
COMPUTADOR
Conecte una computadora en la
entrada D-Sub o DVI-D en la entra-
da de audio correspondiente.
¡LISTO!
Conecte el televisor en una
salida de corriente debidamente
aterrizada. Inserte las baterías en
el control remoto.
3
1
2
Ya está listo ahora para disfrutar su
nuevo televisor de pantalla de cristal
líquido Westinghouse. Presione el
botón de encendido en el tablero o
en el control remoto para accionar el
televisor.
DISFRUTE AL MÁXIMO SU TELEVISOR DE PANTALLA DE CRISTAL LÍQUIDO Usted podrá conectar su
televisor de pantalla de cristal líquido a una variedad de dispositivos electrónicos, incluyendo un decodificador de cable o de
televisión por satélite, una consola de juegos de video, una videograbadora, o una computadora. En la tabla le presentamos
nuestras recomendaciones para obtener la máxima calidad de imagen al usar estos dispositivos de uso general.
Entrada de S-Video
Audio-R
Audio-L
DVI-D
ENTRADAS DE VIDEO
ANT
Video
S-Video
YPbPr
ENTRADAS DE PC
Video
D-Sub
(VGA)
DVI
Cable/Receptor de satélite
Reproductor de DVD's
Buena
Mejor
Mejor
Buena
Buena
Excelente
YPbPr
Consola de
juegos de video
Monitor
Bueno
Mejor
Mejor
Excelente
VCR
Buena
Mejor Excelente
•
Fije la resolución de la computadora a 1440 x 900
D-Sub (VGA)
Antena
Nota: La entrada de audio se comparte entre el YPbPr, Video y el S-Video
Use el botón de entrada del control remoto o el teclado para
navegar entre las entradas de TV, D-Sub, DVI, YPbPr, Video,
o S-Video.
Entrada de Audio
Salida de Audio
AJUSTE TÍPICO
• Player Tocador de DVD con entrada para YPbPr
• Acción de consola de juegos que usa S-Video
• Visualización y editado de VCR con entrada de Video
© 2006 Westinghouse Digital Electronics, LLC. Todos los derechos reservados. Especificaciones sujetas a cambio
sin previo aviso. El símbolo de la ¼, Westinghouse, y Puede Estar Seguro... si es Westinghouse son marcas comer-
ciales propiedad de Westinghouse Electric Corporation y se usan bajo licencia. MA-PS-0120-0601
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|