Westinghouse Computer Monitor LCM 19v1 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRODUCT SAFETY  
INSTRUCTIONS  
Read carefully and follow all warnings and instructions in this User's Manual and those  
marked on the product before you use the monitor. Failing to follow these warnings can result  
in personal injury or damage to the monitor. Keep this User’s Manual in a convenient  
location for future reference. Important: Save the original box and all packing material for  
future shipping needs.  
Proper Handling of the Monitor  
Always handle your LCD monitor with care. Avoid touching the LCD screen. Skin oils are  
difficult to remove.  
Always position the LCD monitor on a stable and level surface. Unstable surfaces can cause  
the monitor to topple and fall, resulting in possible damage or injury.  
Avoid exposing the monitor to direct sunlight or high temperatures, which can damage or  
shorten its useful life. Do not place near heat sources such as radiators, heat registers, or  
other appliances that generate heat. Orient the monitor away from direct sunlight to reduce  
glare.  
Avoid exposing the monitor to rain, water, moisture or high humidity. Do not place it near  
basins or sinks where it may come in contact with water.  
Never place heavy or sharp objects on the LCD monitor, video cable, or power cord.  
Overloading Outlets  
Do not overload electrical power sources when installing the LCD monitor. Overloading wall  
outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only  
grounded or polarized outlets.  
Power Cord Protection  
Minimize wear on the power supply cord. The power supply cord should be routed away from  
foot traffic and contact with other objects. Do not route the power cord under rugs or carpeting.  
The cord should never be severely bent, pinched, or twisted. Periodically inspect the power  
cord and each end of the cord for wear or damage. Unplug and replace the cord if it is  
damaged.  
Ventilation  
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable  
operation of the product and to protect it from overheating, these openings must not be  
blocked or covered. Keep the LCD monitor a minimum of four (4) inches away from any wall to  
assure sufficient airflow and ventilation. Increased temperatures may cause fire or device  
failure.  
2
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To assure proper ventilation, do not block the openings by placing the product on a bed, sofa,  
rug or other similar surface. Do not place the product in a built-in installation, such as a  
bookcase or enclosed rack, unless proper ventilation is provided.  
Other Notices and Precautions  
Caution: Never remove the rear cover. There are no user serviceable parts inside. The LCD  
monitor contains high voltage parts. You may be seriously injured if you touch them.  
Do not attempt repairs yourself. The warranty does not cover repairs or attempted repairs by  
anyone not authorized by Westinghouse Digital. Refer all servicing and repairs to qualified  
service personnel.  
If the monitor begins to emit smoke, an abnormal noise, or a strange odor, immediately turn it  
off and unplug the power cord. Contact the Westinghouse Service Center.  
If the LCD monitor will not be used for an extended period of time, unplug the power cord.  
3
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the LCD Monitor  
MAKE SURE THE LCD MONITOR IS TURNED OFF  
NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE  
To Clean the Screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on  
a clean, soft, lint-free cloth, and wipe the screen.  
To Clean the Case:  
1. Use a soft, dry cloth.  
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild  
non-abrasive detergent on a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the  
LCD screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD  
display case. Westinghouse Digital will not be liable for damage resulting from use of any ammonia or  
alcohol-based cleaners.  
4
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Guidelines  
Warning: This device must be operated with the original power supply, part number ADP-60CF A.  
CAUTION: The power supply outlet should be located near the equipment and should be easily accessible. Use  
a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual  
country. Some examples are listed below:  
USA.................UL  
Canada.............CSA  
Germany..........VDE  
Switzerland ..... SEV  
Britain ............. BASE/BS  
Japan ............... Electric Appliance Control Act  
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION  
The power cord set for this unit is enclosed and has been selected according to the country of destination and  
must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord,  
or it is not enclosed.  
The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below:  
Figure A1  
Figure A2  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.  
For units that are mounted on a desk or table, type SVT or SJT power cords may be used. If the monitor is  
placed on the floor, only SJT type cord may be used. The power cord must be selected according to the current  
rating for your unit. Please consult the table below for the selection criteria for power cords used in the United  
States and Canada.  
Cord Type  
Size of Conductors in Cord Maximum Current Rating of Unit  
SJT  
18 AWG  
16 AWG  
14 AWG  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
12 Amps  
10 Amps  
12 Amps  
SVT  
FCC Compliance Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy, and may cause harmful interference to radio  
communications if not installed and used in accordance with the instructions. However, there  
is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced technician for help.  
FCC Warning:  
To assure continued FCC compliance, the user must use grounded power supply cord and the provided  
shielded cables. Any unauthorized changes or modifications not expressly approved by Westinghouse  
Digital for compliance could void the user's authority to operate this device.  
5
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and practical,  
this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized  
for 1280 x 1024 display resolution.  
Package Contents  
LCD Monitor (19”)  
Detachable Base Stand  
Cables  
o
o
o
o
DC Power Supply Adapter  
AC Power Adapter Cord  
VGA (HD15) Male – Male Cable  
3.5 mm Male – Male Stereo Audio Cable  
Literature  
o
o
User’s Manual  
Warranty Card  
1. Attaching the Base Stand to the LCD Monitor  
Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and  
snap into place. To remove the base stand, press the tabs on the bottom of the stand neck  
and remove the base.  
2. Connect the VGA and Audio Cables  
Connect a VGA cable (to the connector labeled “D-SUB”) and an audio cable (to the connector  
labeled “AUDIO-IN”) from the back panel of the LCD monitor to your PC.  
3. Connect Power Cables  
Connect the DC power adapter cord to the LCD Monitor (to the connector labeled “DC-IN”)  
and then connect the female AC power cord to the adapter. Plug the AC power cord into a  
properly grounded AC outlet.  
4. Turn the Power On  
Press the power button on the front of the LCD monitor. The LED light will turn green if a  
signal input is detected or it will be orange if no input is detected.  
Auto Adjust  
Although a computer can detect the new monitor with the built-in VESA Plug & Play feature,  
the Auto Adjust function can be used to enhance the display. To perform the Auto Adjust:  
6
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu Functions  
All the function settings for the LCD monitor are controlled via the control keys located on the  
bottom part of the front panel. To display the OSD main menu, press the “Menu” keypad  
button on the control keys. (Note: The OSD menu display will disappear automatically after  
approximately 10 seconds, if no action is taken.)  
The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the  
monitor settings can be made using the OSD menu.  
Press the “Menu” keypad button to display the OSD menu.  
Press the “+” or “-“ keypad button to select the function to be adjusted.  
Press the “Menu” keypad button to enter the OSD sub-menu to be adjusted.  
Press the “+” or “-“ keypad button to change the setting of the function.  
To exit the OSD menu or go back to the previous action, press the “Auto/Exit” keypad button.  
It automatically will save any changes that have been made.  
Language Selection  
Settings  
Color Temp. Selection  
Volume Adjustment  
Image Adjustment  
Input Source Selection  
(optional)  
Audio Current Status  
Color Temp. Status  
Source Resolution & Frequency  
Input Source Status (Optional)  
Repeat above steps for changing the setting of other functions. The following is a list of the  
OSD sub-menus for the LCD monitor.  
7
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu  
Sub-Menu  
Brightness  
Contrast  
Clock  
Description and Function  
Adjust the brightness of the screen  
Image  
Adjust the contrast of the image  
Adjust the clock pulse of the image  
Adjust the focus of the image  
Phase  
Move the image left and right on the screen  
Move the image up and down on the screen  
Adjust the picture sharpness of lower resolutions  
H. Position  
V. Position  
Sharpness  
Volume  
Audio  
Color  
Adjust the audio volume  
Mute  
Turn on or off the audio muting  
Set the color temperature to 9300K white color  
Set the color temperature to 7500K white color  
Set the color temperature to 6500K white color  
Adjust red gain  
9300K  
7500K  
6500K  
User/Red  
User/Green  
User/Blue  
English  
Adjust green gain  
Adjust blue gain  
Language  
Select the OSD language  
Français  
Italiano  
Deutsch  
Español  
日本語  
繁體中文  
Settings  
OSD Timeout  
OSD Position  
Adjust the OSD display time setting  
Move the OSD display position to any one of the following 5 positions  
within the overall screen  
1
2
3
4
5
Auto Setting  
Recall  
Adjust clock, phase and positions automatically  
Restore factory settings  
Input Source Analog  
Select Analog input source:  
8
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Backlight Control  
Display Modes  
The monitor backlighting can be controlled by using the Turbo button on the control keypad.  
There are 3 modes: Economy, Text and Picture. To toggle between these modes, press the  
Turbo key until the mode you desire is selected. These modes automatically change the  
backlighting levels between bright, brighter and brightest.  
9
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image Problem  
No Signal Input  
If there is no source connected to the monitor, the following error message will be displayed:  
Out of Range  
If the monitor settings are not compatible with the PC or out of range of the LCD monitor, the  
following error message will be displayed:  
10  
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
19” Color TFT Active Matrix LCD. Anti-static and hard coated.  
Panel Size  
Type  
Optimum Resolution  
Response Time  
1280 x 1024  
21 ms  
Contrast Ratio  
600:1  
Maximum Brightness  
Viewing Angles  
300 Nits  
170° (H) / 170° (V)  
72% TBD  
Color Saturation  
Directly wall mountable  
100 mm VESA®  
Wall/Arm Mount  
Input Signal  
Physical  
Video  
Audio  
HD-15 pin mini D-Sub (VGA connector)  
3.5mm Mini-Stereo jack male-male  
Speaker Output  
Power  
Built-in audio amplifier and speakers, 2.5 watts * 2 channels  
100-240 VAC, 50/60 Hz (auto switch), 1.5A  
32° F to +95° F (0° C to +35° C)  
20% to 90% (no condensation)  
Up to 3,000 meters  
Voltage  
Operating Conditions Temperature  
Humidity  
Altitude  
Storage Conditions  
Dimensions  
Temperature  
Humidity  
Altitude  
Unit  
-4° F to +140° F (-20° C to +60° C)  
10% to 90% (no condensation)  
Up to 12,000 meters  
16.4 (w) x 17.1 (h) x 9.2 (d) in  
Carton  
Unit  
18.2 (w) x 18.4 (h) x 6 (d) in  
Weight  
10.4 lb (3.8 kg)  
Regulations  
FCC-B, UL, CSA (CUL), Energy Star®, Plug & Play  
Power consumption DC On  
<73W  
<3W  
(Blue LED)  
(LED OFF)  
DC Off  
Lamp Life  
40,000 hours  
11  
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
No Power  
Make sure the DC cord is plugged into the back of the LCD monitor.  
Make sure the AC power cord is securely connected to the AC socket.  
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is  
supplying the proper voltage.  
No Image  
Make sure the power button is ON.  
Check whether the LCD monitor and computer power cords are plugged in and check  
the power supply.  
Power is ON but No Screen Image  
Adjust the brightness and contrast levels.  
Make sure the VGA cable is securely connected to both the computer and monitor.  
“Out Of Range”  
Check the computer image output resolution and frequency and compare the value with  
the preset values of the computer’s graphics card.  
Fuzzy Image  
Adjust the Phase setting on the monitor.  
Image Too Bright or Too Dark  
Adjust the brightness and contrast levels using the OSD.  
Make sure that the computer is not displaying an irregular image.  
Check the VGA connection between the computer and LCD monitor.  
Perform Auto Adjust.  
Distorted Image  
Reset the LCD monitor by performing the “Recall” function using the OSD.  
Remove extra accessories (such as a VGA extension cord).  
Image is Not Centered (size is not scaled correctly)  
Perform Auto Adjust  
Adjust the horizontal and/or vertical position using the OSD.  
Check image size setting.  
Colors are Not Correct  
Adjust the color setting using the OSD.  
No Sound  
Check the audio connection.  
12  
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting the LCD Monitor on a Wall  
Check the Westinghouse Digital website for wall mounting solutions.  
Use the 100 mm VESA hole pattern to secure a mounting plate to the LCD monitor.  
Use professional installation to reduce the risk of injury and damage.  
Additional Questions  
Contact Westinghouse Digital Customer Service at (866) 287-5555 or write us at  
13  
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SE-UM-1901-0502  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weil McLain Burner CF1400 W User Manual
Westinghouse Blender 1097958 User Manual
Wharfedale Speaker 35T User Manual
Whirlpool Air Conditioner ACE184PT0 User Manual
Whirlpool Microwave Oven AKZ 562 User Manual
Whirlpool Washer Dryer LA638OXS User Manual
Wolfgang Puck Oven BRON0118 User Manual
Zanussi Cooktop ZKT631DX User Manual
Zanussi Oven ZCM 8021 User Manual
Zanussi Range ZCM 650 User Manual