Model No. WLEX14910
Serial No.
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
we will guarantee
complete satisfaction
through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
Patent Pending
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the new WESLO®
PURSUIT 525 CS exercise cycle. Cycling is one of
the most effective exercises for increasing cardiovas-
cular fitness, building endurance, and toning the entire
body. The PURSUIT 525 CS offers an impressive
array of features to let you enjoy this healthful exer-
cise in the convenience and privacy of your home.
Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
WLEX14910. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual).
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading the manual, please call our Customer
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Pedal
Resistance Knob
Seat
Backrest
Handlebar
Seat Knob
Seat Carriage
RIGHT SIDE
REAR
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver
and Phillips screw-
.
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 10. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in
the parts bag, check to see if it has been pre-attached.
M6 Nylon
M10 Black Nylon Locknut (50)–2
M8 Split
M10 Black Split
Washer (45)–2
M10 Zinc
Washer (62)–2
Locknut (53)–4 M10 Zinc Nylon Locknut (61)–2 Washer (56)–3
M6 x 34mm Button
Screw (52)–4
M8 x 37mm Button
M6 x 16mm Button
Screw (57)–8
Screw (55)–2
M10 x 75mm Button Bolt (51)–2
M8 x 45mm Button Screw (54)–1
M10 x 56mm Carriage Bolt (49)–2
M10 x 85mm Carriage Bolt (48)–2
1. Identify the Front Stabilizer (2). Turn the Front
1
Stabilizer so that the warning decal is in the position
shown. While another person lifts the front of the
Frame (1) slightly, attach the Front Stabilizer to the
Frame with two M10 x 85mm Carriage Bolts (48) and
two M10 Black Nylon Locknuts (50).
Decal
48
2
1
50
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach the indicated end of the Seat Frame (3) to the
Rear Stabilizer (9) with two M10 x 56mm Carriage
Bolts (49), two M10 Zinc Washers (62), and two M10
Zinc Nylon Locknuts (61).
2
49
3
9
62
61
62
3. Slide the Seat Carriage (4) onto the other end of the
Seat Frame (3). Make sure that the Seat Carriage is
oriented as shown. Insert the end of the Seat Frame
into the Frame (1), and attach it with two M10 x 75mm
Button Bolts (51) and two M10 Black Split Washers (45).
3
4
1
28
Insert the Seat Knob (28) into the welded nut (not
shown) on the right side of the Seat Carriage (4) and
into one of the adjustment holes in the right side of the
Seat Frame (3). Tighten the Seat Knob into the welded
nut.
45
3
45
51
4. Slide a Handlebar (7) onto one side of the Seat
Carriage (4). Attach the Handlebar with two M6 x
34mm Button Screws (52) and two M6 Nylon Locknuts
(53).
4
7
4
Attach the other Handlebar (7) to the Seat Carriage (4)
in the same way.
53
52
7
5. Attach the Backrest Frame (5) to the Seat Carriage (4)
with an M8 x 45mm Button Screw (54) and an M8 Split
Washer (56) from the top, and two M8 x 37mm Button
Screws (55) and two M8 Split Washers (56) from the
bottom.
5
10
5
Next, attach the Backrest (10) to the Backrest Frame
(5) with four M6 x 16mm Button Screws (57).
54
56
57
4
56
55
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Attach the Seat (12) to the Seat Carriage (4) with four
M6 x 16mm Button Screws (57).
6
12
57
57
4
57
16
7. The Console (16) requires two AA batteries (not includ-
ed). Alkaline batteries are recommended. Refer to the
inset drawing. Remove the battery cover from the back
of the Console, and insert two AA batteries into the
Console. Make sure that the negative ends of the
batteries (marked “–”) are touching the springs in
the Console. Reattach the battery cover.
7
43
1
14
Next, plug the Reed Switch Wire (43) into the back of
the Console (16). Carefully slide the Console onto the
indicated tab on the Frame (1). Note: The Console is
held by friction; it does not snap into place.
13
16
Battery
Cover
Press the Resistance Knob (14) onto the Resistance
Control (13).
Batteries
8. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the left arm of the
Crank (27). Tighten the Right Pedal (not shown) clock-
wise into the right arm of the Crank. Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten the
Pedals. For best performance, the Pedals must be
kept tightened.
8
65
24
27
Adjust the Left Pedal Strap (65) to the desired position
and press the end of the Strap onto the tab on the Left
Pedal (24). Adjust the Right Pedal Strap (not shown) in
the same way.
Tab
9. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra hardware may be left over. Place a mat beneath the exercise cycle to protect the floor.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT
BATTERY INSTALLATION
The seat can be
adjusted to the
position that is the
most comfortable
for you. To adjust
the seat, first
Before the console can be operated, two AA batteries
must be installed. Refer to step 7 on page 6 for instal-
lation instructions.
DESCRIPTION OF THE CONSOLE
remove the seat
knob. Slide the seat
to the desired posi-
tion, and then insert
the seat knob into
Speed
Bar
Display
Seat
Knob
the welded nut on
the right side of the
seat carriage and
into one of the
Seat
Frame
adjustment holes in the right side of the seat frame.
Tighten the seat knob into the welded nut.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
The console features five modes that provide instant
exercise feedback during your workouts:
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired positions,
and then press the
ends of the straps
back onto the tabs.
Strap
Tab
• Scan—This mode displays the time, speed, distance,
and calories modes, for five seconds each, in a
repeating cycle.
• Time—This mode displays the elapsed time. Note: If
you stop pedaling for five seconds, the time mode
will pause and a stop symbol will appear.
HOW TO ADJUST THE RESISTANCE
• Speed—This mode displays your pedaling speed, in
miles per hour.
To increase the
resistance of the
pedals, turn the
resistance knob
clockwise; to
decrease the resis-
tance, turn the
Resistance
Knob
• Distance—This mode displays the total distance that
you have pedaled, in miles.
• Calories—This mode displays the approximate num-
ber of calories you have burned.
knob counterclock-
wise. Important:
Stop turning the
knob when turning becomes difficult, or damage
may result.
The console also features a speed bar. As you
increase your pedaling speed, additional indicators will
appear in the bar.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE CONSOLE
Time, speed,
distance, or
Note: If there is a thin sheet of clear plastic on the
face of the console, remove it.
calories
mode—To
select one of
1. To turn on the power, press the mode button or
begin pedaling. The entire display will appear for
two seconds; the console will then be ready for
use.
these modes
for continuous
display, press
the mode but-
ton repeatedly. The mode indicators will show
which mode is selected. Make sure that the scan
mode is not selected.
2. Select one of the five modes:
Scan mode—
When the
power is turned
on, the scan
mode will auto-
matically be
selected. One
mode indicator
will show that
the scan mode
3. To reset the display, press the mode button for two
seconds. After the display is reset, the scan mode
will be selected.
4. To turn off the power, simply wait for about four
minutes. The console has an “auto-off” feature.
If the pedals are not moved and the mode but-
ton is not pressed for four minutes, the power
will turn off automatically to conserve the bat-
teries.
Mode Indicators
is selected, and a second mode indicator will show
which mode is currently displayed. Note: If a differ-
ent mode is selected, you can select the scan
mode by repeatedly pressing the mode button.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle reg-
ularly. Replace any worn parts immediately.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. Refer to step 7 on page 6 for
replacement instructions. In addition, make sure that
the reed switch wire is plugged fully into the console.
Note: The console requires two AA batteries; alkaline
batteries are recommended.
To clean the exercise cycle, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
Aerobic Exercise
WARNING:
Before beginning
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
HOW TO MEASURE YOUR HEART RATE
EXERCISE INTENSITY
To measure your
heart rate, first exer-
cise for at least four
minutes. Then, stop
exercising and place
two fingers on your
wrist as shown. Take
a six-second heart-
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
beat count, and multi-
ply the result by 10 to find your heart rate. For exam-
ple, if your six-second heartbeat count is 14, your
heart rate is 140 beats per minute. (A six-second
count is used because your heart rate will drop rapidly
when you stop exercising.)
WORKOUT GUIDELINES
Each workout should include the following three parts:
To find the proper heart rate for you, first find your age
at the bottom line of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers are your “training
zone.” The lowest number is the recommended heart
rate for fat burning, the middle number is the recom-
mended heart rate for maximum fat burning, and the
highest number is the recommended heart rate for
aerobic exercise.
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
Burning Fat
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near one of the lower
two numbers in your training zone as you exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember, the key to success is make exer-
cise a regular and enjoyable part of your everyday life.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. WLEX14910
R1101A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
2
2
2
2
1
Frame
Front Stabilizer
Seat Frame
Seat Carriage
Backrest Frame
Crank Pin
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
#
1
2
1
1
1
2
1
2
1
2
2
2
2
2
2
2
2
4
4
1
2
3
8
4
9
2
2
2
1
1
1
1
1
1
Backrest Frame Endcap
Seat Frame Endcap
Flywheel
Magnet
Flywheel Axle
Flywheel Bearing
Cable Clamp
M6 Eyebolt
Reed Switch/Wire
Adjustment Bracket
M10 Black Split Washer
M6 Nut
M8 Nylon Locknut
M10 x 85mm Carriage Bolt
M10 x 56mm Carriage Bolt
M10 Black Nylon Locknut
M10 x 75mm Button Bolt
M6 x 34mm Button Screw
M6 Nylon Locknut
M8 x 45mm Button Screw
M8 x 37mm Button Screw
M8 Split Washer
M6 x 16mm Button Screw
M5 x 7mm Screw
M4 x 16mm Screw
M4 x 25mm Screw
M10 Zinc Nylon Locknut
M10 Zinc Washer
Handlebar
Flywheel Spacer
Rear Stabilizer
Backrest
Foam Handgrip
Seat
Resistance Control/Cable
Resistance Knob
Drive Belt
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Console
Left Side Shield
Right Side Shield
Resistance Strap
Seat Carriage Bushing
Spring
Strap Clamp
Handlebar Endcap
Left Pedal
Return Spring
Right Pedal
Crank/Pulley
Seat Knob
Reed Switch Clamp
Crank Flange Bushing
Front Endcap
Rear Endcap
Split Bushing Set
Crank Washer
M4 x 16mm Flat Head Screw
Seat Frame Endcap
Left Pedal Strap
Right Pedal Strap
User’s Manual
#
Allen Wrench
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. WLEX14910
R1101A
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
• The MODEL NUMBER of the product (WLEX14910)
• The NAME of the product (WESLO® PURSUIT 525 CS exercise cycle)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 10 of this manual).
WESLO is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 179914 R1101A
Printed in China © 2001 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|