Model No. WESY85070
Serial No.
Write the serial number in the space
above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER¨ 8507
Training System. The WEIDER 8507 offers an impres-
sive array of weight stations designed to develop
every major muscle group of the body. Whether your
goal is to tone your body, build dramatic muscle size
and strength, or improve your cardiovascular system,
our Customer Service Department toll-free at 1-800-
999-3756, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time (excluding holidays). To help us assist
you, please note the product model number and serial
number before calling. The model number is
WESY85070. The serial number can be found on a
the WEIDER 8507 will help you to achieve the specific decal attached to the WEIDER 8507 (see the front
results you want. cover of this manual).
For your safety and benefit, read this manual care- Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
fully before using the WEIDER¨ 8507 Training
System. If you have additional questions, please call
ASSEMBLED
DIMENSIONS:
Height: 77 in.
Width: 39 in.
Length: 48 in.
High Pulley Station
Lat Bar
Arms
Backrest
Leg Lever
Weight Stack
Weight Pin
Low Pulley Station
Foot Plate
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Due to the size
and weight of the home gym system, assemble it in
the location where it will be used.
¥ Tighten all parts as you attach them, unless
instructed to do otherwise.
THE FOLLOWING TOOLS (NOT INCLUDED) ARE
REQUIRED FOR ASSEMBLY:
¥ Place all parts of the home gym system in a
cleared area and remove the packing materials;
do not dispose of the packing materials until
assembly is completed.
¥ Two (2) adjustable wrenches
¥ One (1) phillips screwdriver
¥ One (1) rubber mallet
¥ Before beginning, read each assembly step and
look at each drawing carefully.
¥ For help identifying small parts used in assembly,
refer to the PART IDENTIFICATION CHART
attached to the center of this manual.
¥ Lubricant, such as grease or petroleum jelly,
and soapy water are also required.
To simplify assembly, the following tools are recom-
mended: A socket set, open or closed wrenches, or
ratchet wrenches.
¥ During assembly, be sure that all parts are orient-
ed as shown in the drawings.
1. Before you begin, make sure that you have
carefully read the instructions at the top of
this page.
1
88
3
Press a 2Ó Square Outer Cap (88) onto each end
of the Stabilizer (71). Press a 2Ó Square Outer
Cap onto each side of the Base (4). Press a 2Ó
Square Inner Cap (27) into the end of the Base.
71
88
4
Insert two 5/16Ó x 2 1/2Ó Carriage Bolts (1) up
through the Stabilizer (71). Insert two 5/16Ó x
2 1/2Ó Carriage Bolts up through the Base (4).
1
88
1
27
Slide the indicated end of the Base (4) onto the
5/16Ó x 2 1/2Ó Carriage Bolts (1) in the Stabilizer
(71). Tighten a 5/16Ó Nylon Locknut (3) onto each
Carriage Bolt.
2
72
2. Set two Weight Bumpers (19) onto the Base (4)
as shown.
19
Slide the Weight Guides (72) into the Base (4).
Attach each Weight Guide to the Base with a
5/16Ó x 2 3/4Ó Bolt (11), two 5/16Ó Washers (8),
two 1/2Ó x 1/2Ó Spacers (65), and a 5/16Ó Nylon
Locknut (3).
3
65
11
8
8
8
4
65
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Slide six Weights (25) on the Weight Guides (72).
Be sure that all of the Weights are turned so the pin
grooves are on the indicated side.
3
72
25
Pin Grooves
4. Press the 1 1/4Ó Square Inner Cap (57) into the
Front Upright (42).
4
64
63
24
57
3
Attach the 1Ó Plastic Stop (64) to the center hole in
the Stop Bracket (63) with a 5/16Ó x 1 1/2Ó Bolt (24)
and 5/16Ó Nylon Locknut (3).
8
Attach the Stop Bracket (63) to the Front Upright
(42) with a 5/16Ó x 2Ó Bolt (61), 5/16Ó Flat Washer
(8), and 5/16Ó Nylon Locknut (3).
61
Slide the Front Upright (42) onto the two 5/16Ó x
2 1/2Ó Carriage Bolts (1) in the Base (4). Thread
two 5/16Ó Nylon Locknuts (3) onto the Carriage
Bolts. Do not tighten the Nylon Locknuts yet.
42
3
1
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the Weight Tube Bumper (79) into the end of
the Weight Tube (80). Slide the Top Weight (77)
onto the Weight Tube. Be sure that the pins on the
Weight Tube are resting in the pin grooves under
the Top Weight.
5
Locate the Short Cable (23). Attach the Short
Cable to the Weight Tube (80) with a 5/16Ó x 1 1/2Ó
Bolt (24) and a 5/16Ó Nylon Locknut (3).
23
77
3
24
80
Pins
79
6. Lubricate the insides of the holes in the Top Weight
(77). Slide the Top Weight onto the stack of
Weights (25).
6
77
Lubricate
25
7. Press two 2Ó Square Inner Caps (27) into the Top
Frame (67).
7
11
11
6
Attach the Top Frame (67) to the Front Upright (42)
with two 5/16Ó x 2 3/4Ó Bolts (11), the Support Plate
(6), and two 5/16Ó Nylon Locknuts (3). Do not tight-
en the Nylon Locknuts yet.
67
8
27
27
Attach the Top Frame (67) to the Stop Bracket (63)
with a 5/16Ó x 2 3/4Ó Bolt (11), 5/16Ó Flat Washer
(8), and 5/16Ó Nylon Locknut (3). Do not tighten
the Nylon Locknut yet.
3
63
3
42
6
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Attach the upper ends of the Weight Guides (72) to
the Top Frame (67) with the 5/16Ó x 6Ó Bolt (74), two
1/2Ó x 3/4Ó Spacers (73), and a 5/16Ó Nylon Locknut
(3).
8
73
85
3
67
Tighten all Nylon Locknuts used in steps 4
through 8.
74
72
9. Press two 1 3/4Ó Square Inner Caps (44), two 1 1/2Ó
Square Inner Caps (32), and two 1Ó Round Inner
Caps (49) into the Arm Frame (52).
9
32
52
49
44
10. Lubricate the upper axle on the Arm Frame (52).
Hold the axle between the two Arm Frame
Bushings (68). Set the Arm Frame Bushings and
the Arm Frame on the welded plate on the Top
Frame (67). Place the Arm Frame Bracket (69) over
the Arm Frame Bushings. Attach the Arm Frame
Bracket to the Top Frame with four 1/4Ó x 1/2Ó
Screws (31) and 1/4Ó Nylon Jam Nuts (86). The
indicated bracket on the Arm Frame must face
forward.
10
31
Lubricate
68
67
69
52
Bracket
86
7
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Press a 1 3/4Ó Square Inner Cap (44) into each end
of an Arm (46).
11
Apply lubricant to the lower axles on the Arm Frame
(52). Slide an Arm (46) onto one of the axles. Hold
two 1Ó Retainers (54) and a 1Ó Round Cover Cap
(55) against the lower end of the axle. The teeth
on the Retainers must bend toward the Round
Cover Cap (see the inset drawing). Tap the
Retainers and Round Cover Cap onto the axle.
52
Lubricate Axle
Bracket
Assemble the other Arm (46) to the Arm Frame (52)
in the same manner.
44
54
55
44
46
Axle
55
54
12. Insert the two 4 1/2Ó ÒLÓ Pins (60) down through the
indicated holes in the Arm Frame (52) and the Arms
(46).
12
60
52
46
13. Wet both Arms (46) with soapy water. Slide a 7 3/4Ó
Pad (45) onto each Arm.
13
Press a 1Ó Round Inner Cap (49) into the indicated
end of a 7Ó Handle (47). Insert the Handle into one
of the Arms (46). Attach the Handle with a 5/16Ó x 2
1/4Ó Bolt (33), two 5/16Ó Flat Washers (8), a 1/2Ó x
3/8Ó Spacer (51) and a 5/16Ó Nylon Locknut (3).
46
47
49
3
46
8
8
49
Attach a 7Ó Handle (47) to the other Arm (46) in the
same manner.
45
51
33
45
47
8
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Attach a Large ÒUÓ Bracket (56) to one of the Arms
(46) with a 3/8Ó x 2 3/4Ó Bolt (70), 3/8Ó Flat Washer
(9), and 3/8Ó Nylon Locknut (21). Be sure that the
Swivel Bracket (58) is on the inside as shown.
Do not overtighten the 3/8Ó Nylon Locknut.
14
58
21
56
Attach a Large ÒUÓ Bracket (56) to the other Arm
(46) in the same manner.
21
46
9
70
56
9
70
46
15
15. IMPORTANT: As you assemble the Long Cable
(66) and the Short Cable (23), refer to the CABLE
DIAGRAMS on page 22 of this manual to make
sure that the Cables are properly routed.
65
81
21
9
Find the end of the Long Cable (66) that does not
have a rubber ball. Insert that end of the Long
Cable up through the indicated opening in the Top
Frame (67).
67
70
9
66
Lay the Long Cable (66) over a 4 1/2Ó Pulley (81).
Attach the Pulley inside the Top Frame (67) with a
3/8Ó x 2 3/4Ó Bolt (70), two 3/8Ó Flat Washers (9),
the two 1/2Ó x 1/2Ó Spacers (65), and a 3/8Ó Nylon
Locknut (21).
23
9
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Remove the 3/8Ó x 1 3/4Ó Bolt (48), 3/8Ó Nylon Jam
Nut (5), and 3 1/2Ó Pulley (15) from the indicated
bracket on the Top Frame (67). Insert the end of the
Long Cable (66) through the bracket and down
through the indicated hole.
16
15
5
66
67
Hole
48
Re-attach the 3 1/2Ó Pulley (15) to the bracket on
the Top Frame (67) with the 3/8Ó x 1 3/4Ó Bolt (48)
and 3/8Ó Nylon Jam Nut (5). Be sure that the Long
Cable is between the Pulley and the top of the
bracket.
17. Wrap the Long Cable (66) around the ÒVÓ Pulley
(76). Attach the Pulley and a Large Cable Trap (82)
to the welded bracket on the Top Frame (67) with a
3/8Ó x 2 1/4Ó Bolt (50) and 3/8Ó Nylon Jam Nut (5).
Be sure that the Large Cable Trap is turned to
the indicated position.
17
82
50
5
76
67
66
18. Note: The 3 1/2Ó Pulley (15) used in this step is
pre-assembled. It is shown removed for easier
part identification.
18
Route the Long Cable (66) around the 3 1/2Ó Pulley
(15) on the left Arm (46). Tighten the 3/8Ó Nylon
Jam Nut (5) and 3/8Ó x 1 3/4Ó Bolt (48). Be sure
that the Cable Trap (59) is oriented as shown.
66
48
15
5
59
46
10
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Note: The 4 1/2Ó Pulley (81) shown in this step
is pre-attached to the Adjustment ÒUÓ Bracket
(75).
19
Remove the 3/8Ó x 1 3/4Ó Bolt (48), 3/8Ó Nylon
Locknut (21), and 4 1/2Ó Pulley (81) from the
Adjustment ÒUÓ Bracket (75).
Attach the Adjustment ÒUÓ Bracket (75) to the Front
Upright (42) with the 5/16Ó x 3 1/4Ó Bolt (35), a 5/16Ó
Flat Washer (8), and a 5/16Ó Nylon Locknut (3).
Thread the Nylon Locknut onto the Bolt until the
first two threads of the Bolt are through the
Nylon Locknut.
48
75
35
81
3
8
Wrap the Long Cable (66) around the 4 1/2Ó Pulley
(81) as shown. Re-attach the Pulley to the
Adjustment ÒUÓ Bracket (75) with the 3/8Ó x 1 3/4Ó
Bolt (48) and 3/8Ó Nylon Locknut (21).
21
42
66
20. Note: The 3 1/2Ó Pulley (15) used in this step is
pre-assembled. It is shown removed for easier
part identification.
20
Route the Long Cable (66) around the 3 1/2Ó Pulley
(15) on the right Arm (46). Tighten the 3/8Ó Nylon
Jam Nut (5) and 3/8Ó x 1 3/4Ó Bolt (48). Be sure
that the Cable Trap (59) is oriented as shown.
66
5
48
59
46
15
11
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Attach the 5/16Ó x 3Ó Bolt (17), two 5/16Ó Flat
Washers (8), and a 5/16Ó Jam Nut (2) to the indicat-
ed hole in the Top Frame (67).
21
8
17
67
2
Slide the end of the Long Cable (66) onto the 5/16Ó
x 3Ó Bolt (17). Tighten another 5/16Ó Jam Nut (2)
onto the Bolt. Note: The 5/16Ó Jam Nut should not
be fully tightened against the end of the Cable.
There must be enough room between the Jam Nuts
for the end of the Cable to pivot.
66
22. Assemble the two ÒIÓ Plates (78), two 3 1/2Ó Pulleys
(15), the Long Cable (66), and the Short Cable (23)
with two 3/8Ó x 1 3/4Ó Bolts (48) and 3/8Ó Nylon Jam
Nuts (5) as shown.
22
66
15
48
78
5
78
23
12
Download from Www.Somanuals.com. All Manuals Search And Download.
23. Attach the 5/16Ó x 3 1/2Ó Bolt (87), two 5/16Ó Flat
Washers (8), the 1Ó Metal Spacer (22), and a 5/16Ó
Nylon Locknut (3) to the Front Upright as shown.
23
16
15
87
Wrap the Short Cable (23) around a 3 1/2Ó Pulley
(15). Attach the Pulley to the Front Upright (42) with
a 3/8Ó x 3 1/2Ó Bolt (16), a 3/8Ó Washer (9), and a
3/8Ó Nylon Jam Nut (5). Be sure that the Short
Cable is between the Pulley and the Metal
Spacer.
42
8
22
9
23
5
8
3
24. Attach the Backrest (41) to the Front Upright (42)
with two 1/4Ó x 2 1/2Ó Screws (43) and 1/4Ó Flat
Washers (10).
24
10
43
41
42
25. Press a 1 1/2Ó Square Inner Cap (32) into the Seat
Frame (36).
25
13
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the center
hole in the Seat Plate (37). Attach the Seat Plate to
the Seat (13) with two 1/4Ó x 3/4Ó Screws (18).
37
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the indi-
cated hole in the Seat Frame (36). Tighten a 1/4Ó
Nylon Locknut (7) with a 1/4Ó Flat Washer (10) onto
the Carriage Bolt.
38
18
32
10
7
Attach the other end of the Seat (13) to the Seat
Frame (36) with a 1/4Ó Flat Washer (10) and the
1/4Ó x 2Ó Screw (20).
36
20
13
Download from Www.Somanuals.com. All Manuals Search And Download.
26. Press a 1 1/2Ó Square Inner Cap (32) into the Leg
Lever (29).
26
Attach the 5/16Ó x 2Ó Eyebolt (62) to the Leg Lever
(29) with a 5/16Ó Flat Washer (8) and a 5/16Ó Nylon
Locknut (3).
3
36
Lubricate a 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg
Lever (29) to the Seat Frame (36) with the Bolt and
a 5/16Ó Nylon Locknut (3). Do not overtighten the
Nylon Locknut; the Leg Lever must be able to
pivot freely.
33
29
8
62
3
32
27. Set the bracket on the Seat Frame (36) onto the
indicated pin on the Front Upright (42). Attach the
Seat Frame with a 5/16Ó x 2 3/4Ó Carriage Bolt (14)
and the Seat Knob (40).
27
36
40
14
Pin
42
28. Press 3/4Ó Round Inner Caps (34) into the ends of
a Pad Tube (28). Insert the Pad Tube into the Seat
Frame (36). Slide a Pad (30) onto each end of the
Pad Tube.
28
Press 3/4Ó Round Inner Caps (34) into the ends of
the other Pad Tube (28). Insert the Pad Tube into
the Leg Lever (29). Slide a Pad (30) onto each end
of the Pad Tube.
34
36
30
28
30
34
29
14
Download from Www.Somanuals.com. All Manuals Search And Download.
29. Slide a Handgrip (12) onto each end of the Lat
Bar (85).
29
12
85
12
30. Make sure that all parts are properly tightened. The use of all remaining parts will be explained in ADJUST-
MENT, beginning on page 16 of this manual. Before using the home gym system, pull each cable a few
times to make sure that the cable moves smoothly over the pulleys. If one of the cables does not move
smoothly, locate and correct the problem before using the home gym system. IMPORTANT: If the cables
are not properly routed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS
on page 22 of this manual.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT
The instructions below describe how each part of the home gym system can be adjusted. Refer to the
EXERCISE GUIDE accompanying this manual to see how the home gym system should be set up for each
exercise. IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in
the correct starting position for the exercise to be performed. If there is any slack in the cable or chain
as an exercise is performed, the effectiveness of the exercise will be reduced.
CHANGING THE WEIGHT SETTING
To change the weight setting, insert the Weight Pin (26)
under one of the Weights (25). Make sure to insert the
Weight Pin until the bent end of the Weight Pin is touch-
ing the Weights, and turn the bent end downward. The
weight setting can be changed from 6 pounds to 81
pounds, in increments of 12.5 pounds. Note: Due to
the cables and pulleys, the actual amount of resis-
tance at each exercise station will vary from the
weight setting.
26
25
SWITCHING THE ARMS TO THE PRESS MODE OR
THE BUTTERFLY MODE
52
To perform the BENCH PRESS exercise, switch the
Arms (46) to the press mode by inserting the two 4 1/2Ó
ÒLÓ Pins (60) down through the indicated holes in the
60
Arm Frame (52) and the Arms.
To perform the BUTTERFLY exercise, switch the Arms
(46) to the butterfly mode by inserting one of the 4 1/2Ó
ÒLÓ Pins (60) down through the hole in the center of the
Arm Frame (52) and the Stop Bracket (not shown). Set
the other ÒLÓ Pin aside.
46
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING AND REMOVING THE SEAT
36
40
Set the bracket on the Seat Frame (36) on the indicated
pin on the Front Upright (42). Attach the Seat Frame to
the Front Upright with the 5/16Ó x 2 3/4Ó Carriage Bolt
(14) and Seat Knob (40).
14
Pin
42
For some exercises, the Seat (13) must be removed.
First, make sure that the chain is not attached to the leg
lever. Next, remove the Seat Knob (40) and 5/16Ó x 2
3/4Ó Carriage Bolt (14) from the Seat Frame (36). Lift
the Seat Frame off the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached to
the front upright (see ATTACHING AND REMOVING
THE SEAT on page 13). Attach the Chain (84) between
the Short Cable (23) and the 5/16Ó x 2Ó Eyebolt (35) on
the Leg Lever with two Cable Clips (83).
84
29
83
23
62
ATTACHING THE LAT BAR OR NYLON STRAP TO
THE HIGH PULLEY STATION
Attach the Lat Bar (85) to the Long Cable (66) with a
Cable Clip (83). For some exercises, the Chain (84)
should be attached between the Lat Bar and the Long
Cable with two Cable Clips. Adjust the length of the
Chain between the Lat Bar and the Long Cable so
the Lat Bar is in the correct starting position for the
exercise to be performed.
83
66
84
85
The Nylon Strap (39) can be attached in the same man-
ner.
39
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING THE LAT BAR OR NYLON STRAP TO
THE LOW PULLEY STATION
23
Attach the Lat Bar (85) to the Short Cable (23) with a
Cable Clip (83). For some exercises, the Chain (84)
should be attached between the Lat Bar and the Short
Cable with two Cable Clips. Adjust the length of the
Chain between the Lat Bar and the Short Cable so
the Lat Bar is in the correct starting position for
the exercise to be performed.
83
84
83
85
The Nylon Strap (39) can be attached in the same
manner.
39
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE-SHOOTING AND MAINTENANCE
Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The
home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.
TIGHTENING THE CABLES
15
Adjustment
Screw
Woven cable, the type of cable used on the home gym
system, can stretch slightly when it is first used. If there
is slack in the cables before resistance is felt, the
cables should be tightened. Locate the adjustment
sleeve and adjustment screw near the lower end of the
Short Cable (23). Loosen the adjustment screw. Pull
the end of the Short Cable until there is no slack. Slide
the adjustment sleeve and the ball against the indicat-
ed 3 1/2Ó Pulley (15). Retighten the adjustment screw.
Make sure that the cables are not too tight, or the top
weight will be lifted off the weight stack.
Ball
Adjustment
Sleeve
23
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑModel No. WESY85070
R0498A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
4
2
21
1
7
1
1
16
5
4
5
2
1
1
5
1
1
2
2
1
4
1
1
2
6
1
3
2
1
4
4
4
5
4
1
1
1
1
1
1
1
1
2
6
2
5/16Ó x 2 1/2Ó Carriage Bolt
5/16Ó Nylon Jam Nut
5/16Ó Nylon Locknut
Base
3/8Ó Nylon Jam Nut
Support Plate
1/4Ó Nylon Locknut
5/16Ó Flat Washer
3/8Ó Flat Washer
1/4Ó Flat Washer
5/16Ó x 2 3/4Ó Bolt
Handgrip
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
#
2
2
6
6
1
2
1
2
4
2
2
1
2
2
2
1
1
1
1
6
1
1
2
1
3
1
2
2
1
1
1
1
2
1
1
2
1
2
1
1
4
1
4
1
Arm
7Ó Handle
3/8Ó x 1 3/4Ó Bolt
1Ó Round Inner Cap
3/8Ó x 2 1/4Ó Bolt
1/2Ó x 3/8Ó Spacer
Arm Frame
Plastic Bushing
1Ó Retainer
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
1Ó Round Cover Cap
Large ÒUÓ Bracket
1 1/4Ó Square Inner Cap
Narrow Swivel Bracket
Cable Trap
Seat
5/16Ó x 2 3/4Ó Carriage Bolt
3 1/2Ó Pulley
4 1/2Ó ÒLÓ Pin
3/8Ó x 3 1/2Ó Bolt
5/16Ó x 3Ó Bolt
1/4Ó x 3/4Ó Screw
Weight Bumper
1/4Ó x 2Ó Screw
3/8Ó Nylon Locknut
1Ó Metal Spacer
Short Cable
5/16Ó x 1 1/2Ó Bolt
Weight
Weight Pin
2Ó Square Inner Cap
Pad Tube
Leg Lever
5/16Ó x 2Ó Bolt
5/16Ó x 2Ó Eyebolt
Stop Bracket
1Ó Plastic Stop
1/2Ó x 1/2Ó Spacer
Long Cable
Top Frame
Arm Frame Bushing
Arm Frame Bracket
3/8Ó x 2 3/4Ó Bolt
Stabilizer
Weight Guide
1/2Ó x 3/4Ó Spacer
5/16Ó x 6Ó Bolt
Adjustment ÒUÓ Bracket
ÒVÓ Pulley
Top Weight
ÒIÓ-Plate
Weight Tube Bumper
Weight Tube
4 1/2Ó Pulley
Pad
1/4Ó x 1/2Ó Screw
1 1/2Ó Square Inner Cap
5/16Ó x 2 1/4Ó Bolt
3/4Ó Round Inner Cap
5/16Ó x 3 1/4Ó Bolt
Seat Frame
Seat Plate
1/4Ó x 2Ó Carriage Bolt
Nylon Strap
Seat Knob
Backrest
Front Upright
1/4Ó x 2 1/2Ó Screw
1 3/4Ó Square Inner Cap
7 3/4Ó Pad
Large Cable Trap
Cable Clip
Chain
Lat Bar
1/4Ó Nylon Jam Nut
5/16Ó x 3 1/2Ó Bolt
2Ó Square Outer Cap
UserÕs Manual
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the userÕs manual for information about ordering replacement parts.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWINGÑModel No. WESY85070
R0498A
82
8
11
17
50
76
69
68
31
32
15
5
6
59
58
15
67
5
81
52
49
33
27
60
65
21
21
9
48
59
56
27
49
70
44
3
21
48
8
2
53
15
44
46
9
9
44
70
66
5
2
66
3
86
70
58
53
56
49
54
8
73
55
74
11
63
54
72
9
8
47
33
55
46
8
3
3
49
3
64
51
49
3
3
47
44
3
78
51
15
15
24
78
48
3
48
33
49
57
8
45
8
8
44
23
5
61
75
81
21
77
35
12
45
41
3
24
85
43
10
80
79
84
12
40
3
8
65
8
39
42
13
83
65
11
88
34
16
15
3
38
37
25
26
87
32
3
36
30
8
3
18
9
22
28
71
3
5
10
14
8
23
88
3
34
7
33
20
29
30
34
4
1
62
30
88
8
28
19
88
3
32
34
30
1
27
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE DIAGRAMS
The cable diagrams below show the proper routing of the Short Cable (23) and the Long Cable (66). Use the
diagram to make sure that the two cables are assembled correctly. The numbers show the routing of each cable.
Long Cable (66)
Short Cable (23)
2
Top Frame
8
4
2
High Pulley
1
5
6
3
7
Weight StackÑ1
Low PulleyÑ3
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3/4" Round Inner Cap (34)
1" Round Inner Cap (49)
1" Round Cover Cap (55)
5/16" x 2" Eyebolt (62)
1 1/4" Square Inner Cap (57)
1 1/2" Square Inner Cap (32)
1 3/4" Square Inner Cap (44)
2" Square Inner Cap (27)
2" Square Outer Cap (88)
Download from Www.Somanuals.com. All Manuals Search And Download.
1/4" Nylon Locknut (7)
1/4" Nylon Jam Nut (86)
5/16" Jam Nut (2)
1/4" x 1/2" Screw (31)
1/4" x 3/4" Screw (18)
1/4" x 2" Screw (20)
1/4" x 2 1/2" Screw (43)
5/16" Nylon Locknut (3)
3/8" Nylon Jam Nut (5)
5/16" x 1 1/2" Bolt (24)
5/16" x 2" Bolt (61)
3/8" Nylon Locknut (21)
5/16" x 2 1/4" Bolt (33)
1/4" Flat Washer (10)
3/8" x 1 3/4" Bolt (48)
5/16" Flat Washer (8)
3/8" x 2 1/4" Bolt (50)
3/8" Flat Washer (9)
1/4" x 2" Carriage Bolt (38)
Download from Www.Somanuals.com. All Manuals Search And Download.
5/16" x 2 1/2" Carriage Bolt (1)
5/16" x 2 3/4" Carriage Bolt (14)
5/16" x 2 3/4" Bolt (11)
1/2" x 3/8" Spacer (51)
1/2" x 1/2" Spacer (65)
1/2" x 3/4" Spacer (73)
1" Metal Spacer (22)
3/8" x 2 3/4" Bolt (70)
5/16" x 3" Bolt (17)
5/16" x 3 1/4" Bolt (35)
1" Plastic Stop (64)
5/16" x 3 1/2" Bolt (87)
1" Retainer (54)
3/8" x 3 1/2" Bolt (16)
5/16" x 6" Bolt (74)
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information:
1. The MODEL NUMBER of the product (WESY85070).
2. The NAME of the product (WEIDER¨ 8507 Training System).
3. The SERIAL NUMBER of the product (see the front cover of this manual).
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 20 of this manual).
WEIDER is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used
for commercial or rental purposes, or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other con-
sequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 145637 H00715-C R0498A
Printed in Canada © 1998 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|