Item #: WQ42BC1
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 09/2010
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware List
Wood dowel
Cam bolt
Cam lock
Door stopper
Round-headed screw
Large bolt
Door stopper plate
Small screw
Door hinge
Medium screw
Handle
Small bolt
Shelf support pin
Plastic wedge
Large screw
Wrench
Glue tube
Sticker
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert dowels (A) into slats (13,14,15). Screw cam bolts (B) into top panel (1) and slat (13). Attach
door stopper (D) to top panel (1) using round-headed screws (E).
Attach slats (14,15) to slat (13) using cam bolts as guides. Insert cam locks (C) into slats (14,15) and
tighten with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Screw cam bolts (B), and insert dowels (A) into panel (4). Attach panel (10) to panel (4) using cam
bolts and dowels as guides. Insert cam locks (C) into panel (10) and tighten with a screwdriver.
Screw cam bolts (B), and insert dowels (A) into panel (3). Attach panel (7) to panel (3) using cam
bolts and dowels as guides. Insert cam locks (C) into panel (7) and tighten with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach bottom panel (2) to the panel assemblies from Steps 3 and 4, and to panels (6,9) using large
bolts (F) and wrench (Q). Note that panels (6,9) will not be directly attached to the panel assemblies
from Steps 3 and 4.
Attach the base assembly from Step 2 to bottom panel (2) by inserting the dowels of the base assembly
into the pre-drilled holes of bottom panel (2).
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide back panel (18), back slat (17) then back panel (16) into the stand assembly.
Insert dowels (A) into the stand assembly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert cam locks (C) into the stand assembly. Attach top panel (1) to the stand assembly using cam
bolts and dowels as guides. Tighten cam locks (C) with a screwdriver to secure top panel (1).
Attach door hinges (I) to doors (11,12) using medium screws (J). Attach handles (K) to doors (11,12)
using small bolts (L). Attach door stopper plates (G) to doors (11,12) using small screws (H).
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach doors (11,12) to the stand assembly at hinges (I) using medium screws (J). For proper
alignment of doors, it may be necessary to loosen small screws (J), adjust the placement of hinges
(I) and re-tighten screws (J).
Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (5) onto
shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (5).
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (8) onto
shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8).
Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (8) onto
shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8).
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure back panels (16,18) using plastic wedges (N) and large screws (P).
Download from Www.Somanuals.com. All Manuals Search And Download.
|