VIZIO
QUICK START GUIDE
Model: SB4021E-B0
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
DO NOT INGEST BATTERY,CHEMICAL BURN HAZARD
The remote control supplied with this product contains a coin/button cell battery.If the coin/button cell battery.If the coin/button cell battery is swallowed,it can cause severe internal burns
in just two (2) hours and can lead to death.
Keep new and used batteries away from children.If the battery compartment does not close securely,stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention.
A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,fire,or the like.
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
SUB
-
MUTE
SUB
+
SRS
TVOL
SRS
TSHD
High Definition Sound Bar with Wireless Subwoofer
Remote Control with Battery
Power Adapter w/Cable
for Sound Bar
Power Cable
for Subwoofer
Stereo RCA to 3.5mm
Audio Cable
Digital Optical
Cable
This Quick Start Guide
Wall Mount Template
Wall Mount Brackets
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & CONNECTIONS
Connections are located here:
Pairing Button
(Subwoofer)
Power Port
Aux Input
Optical Input
(Stereo 3.5mm)
(Located on Side)
Service Port
For use only by service technician.
USB Port
Aux Input
(Stereo RCA)
Optical Input located on side:
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls located here:
Power Button
Input Button
Volume Up/Down Buttons
Indicator LEDs
Download from Www.Somanuals.com. All Manuals Search And Download.
FIRST-TIME SETUP
BOTTOM OF SOUND BAR
1
GOOD
BETTER
BEST
3.5MM TO RCA
CABLE
3.5MM TO RCA
CABLE
DIGITAL OPTICAL
CABLE
CHOOSE ONE CABLE:
GOOD
BETTER
BEST
AND CONNECT IT TO YOUR TV*
Download from Www.Somanuals.com. All Manuals Search And Download.
*Not all TVs have the audio outputs shown above.To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK OF SUBWOOFER
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
When
using
the
remote, point it at the
center of the Sound
Bar. The sensor is
located there.
Sound Bar is centered
below the TV.
Subwoofer can be placed
anywhere in the room within 60
feet of the Sound Bar. Placement
near a corner of the will produce
more bass in the room.
For the best surround sound experience, position the components as shown.*
The Sound Bar should be close to ear level.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Gently pull the plastic tab from
the back of the remote control.
(The plastic tab can be thrown away)
10
Power
Turn your TV on, then press the Power button on
the remote to turn the Sound Bar on.
SUB -
MUTE
SUB +
Press the Input button to cycle through the audio
inputs. For example, if you connected your TV to
Aux 1, set the Sound Bar to Aux 1.
Setup is complete.
SRS
TVOL
SRS
TSHD
Input
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
Power
Press to turn on or off.
Volume Up
Play/Pause/Mute
Press to play/pause.
Press to mute.
Press to increase volume.
Fast Forward/Next/SUB +
Press and hold to fast forward. (USB Mode)
Press to advance to next track. (USB Mode)
Press to increase subwoofer volume.
SUB -
MUTE
SUB +
Fast Rewind/Back/SUB -
Press and hold to fast rewind. (USB Mode)
Press to return to previous track. (USB Mode)
Press to decrease subwoofer volume.
Volume Down
Press to decrease volume.
SRS TruSurround HD
Press to enable/disable SRS
TruSurround HD.
SRS TruVolume
Press to enable/disable SRS TruVolume.
Input
SRS
TVOL
SRS
TSHD
Press to change input source.
When using the remote, point it at the center of the Sound Bar.The sensor is located there.
If your remote stops responding,you
may need to replace the battery.
To replace the battery, insert a
flat-head screwdriver into the slot
as shown. Gently push down on the
tab, then press and pull downward
on the battery cover to open.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICATOR LEDS
LED Indicators located here:
Indicator LEDs flash according
to input selection:
USB - Input 4*
Optical - Input 3*
AUX - Input 2
AUX - Input 1
*Rapid flash indicates incompatible source or file format. If there is no sound output, see Help & Troubleshooting page.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICATOR LEDS (CONTINUED)
LED Indicators located here:
When the four center
Indicator LEDs are brightly
lit, the selected SRS mode is
enabled.When the LEDs are
not lit, SRS mode is disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE SOUND BAR
Place the included wall mounting
template against the wall under your TV.
Mark the locations of the 4 bracket holes
using a pencil.
1
32.24’’/ 819mm
2
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls).
Screws for attachment to the wall are not included.
Choose the screw type and length appropriate
to your home’s construction. If in doubt, consult a
professional installer.
If you are unfamiliar with power tools or the layout of electrical
wiring in the walls of your home, consult a professional
installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAIRING THE SUBWOOFER
VIZIO has paired your Sound Bar and Subwoofer
at the factory, however you may need to pair the
Subwoofer to the Sound Bar if there is no sound
coming from the Subwoofer.
What does Pairing mean?
Pairing means to wirelessly connect.
1
2
First confirm that the power switch is in the ON position.
Press and hold the Pairing button on the
bottom of the Sound Bar for 5 seconds. The
green LED on the back of the Sound Bar will
blink then go solid.The Subwoofer is now linked
with the Sound Bar.
Press and hold the Pairing button on the back of the
Subwoofer for 5 seconds.The LED on the back of the
Subwoofer will begin to blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
HELP & TROUBLESHOOTING
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
There is no
power.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote to select a different input source.
• If you are using the 3.5mm output from your TV, be sure that is connected to an audio OUTPUT and not
audio INPUT. Some TVs use 3.5mm audio INPUT for devices such as computers.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
There is no
sound.
• If you are using a SPDIF/Optical connection, make sure your TV is set to PCM audio output.
• If the Indicator LEDs all flash rapidly, the selected input cannot be decoded.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the
problem may be with the original device.
• Connect your device to a different input on the Sound Bar.
• Make sure the Subwoofer is plugged in and turned on (Toggle switch on the rear of the Subwoofer).
• Press the SUB + button on the remote control to increase the bass level.
There is no bass.
• Ensure the Subwoofer is linked to the Sound Bar. See Re-Linking the Subwoofer on the previous page.
• Press the SUB - button on the remote control to decrease the bass level.
• Move the subwoofer away from the corner.
There is too
much bass.
I want to return
my Sound Bar to
factory settings.
• Press and hold the Input and Vol - buttons on the Sound Bar for 3 seconds to return it to its factory
default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this
warranty is determined to be defective within the warranty period,VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday,
is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion.Replacement parts and Products are warranted for the remaining portion
of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service.VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED
BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection.VIZIO Technical Support will provide instructions for packing and shipping
the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal
issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products
with unreadable or removed serial numbers, or requiring routine maintenance are not covered.This one year limited warranty does not cover Products sold“AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHERTHANTHOSE LISTED OR DESCRIBED ABOVE.ANY IMPLIED WARRANTIES,INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,SHALL BE LIMITED IN DURATION
TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER
SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR
LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS
Sound Bar: Two 2-3/4”High-Efficiency
Full-Range Transducers
Frequency Response 90 Hz - 19.5 KHz
(Sound Bar):
Subwoofer: 6.5”Long-Throw Driver
Inputs: 1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio Pair
1 x Optical Digital
Frequency Response 50 Hz - 90 Hz
(Subwoofer):
Voltage: 110-240 VAC, 50-60 Hz
Dimensions (Sound Bar): 40.72”W x 3.28”H x 2.50”D
Dimensions (Subwoofer): 9.57”W x 10.00”H x 10.50”D
Net Weight (Sound Bar): 5.7 lbs
1 x USB
Sound Pressure Level: 101 dB
Net Weight (Subwoofer): 9.5 lbs
Compliances: UL, FCC, cUL, NRCAN
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default settings or enabling
other features will increase power consumption that could
exceed the limits necessary to qualify for ENERGY STAR rating.
SRS is
a
trademark of SRS Labs, Inc. SRS technologies are
incorporated under license from SRS Labs, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic
components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal
and recycling options.
Other
Images(s) under license from Shutterstock.com
HELP & TROUBLESHOOTING
All VIZIO products include FREE lifetime technical support.
The VIZIO support team is highly trained and is based in the United States.
We can help with:
• Product Setup
• Technical Problems
• Warranty Questions
• And More
Hours of operation:
Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
Phone: (877) 698-4946 (TOLL-FREE)
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 VIZIO INC.ALL RIGHTS RESERVED.
130206OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|