VIZIO
USER MANUAL
Model: D39h-C0
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
THANK YOU FOR CHOOSING VIZIO
IMPORTANT SAFETY INSTRUCTIONS
Congratulations on the purchase of your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire.To prevent
your TV from being damaged, the following instructions should
be observed for the installation, use, and maintenance of your
TV. Read the following safety instructions before operating your
TV. Keep these instructions in a safe place for future reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure
there are no missing or damaged parts.
•
To reduce the risk of electric shock or component
damage, switch off the power before connecting other
components to your TV.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services
toll free at (877) 698-4946.
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
We recommend that you either:
•
•
Complete and mail the enclosed registration card
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Extended Warranties
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
For peace of mind, and to protect your investment beyond the
standard warranty,VIZIO offers on-site extended warranty service
plans. These plans provide additional coverage during the
standard warranty period. To purchase an extended warranty
•
•
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong.The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
WHEN READING THIS MANUAL
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
•
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
When you see this symbol, please read the
accompanying helpful tip.
•
•
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket,
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
or table specified by the manufacturer,or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
•
Do not apply pressure or throw objects at your TV.
This may compromise the integrity of the display.The
manufacturer’s warranty does not cover user abuse or
improper installations.
•
•
Unplug this apparatus during lightning storms or when
unused for long periods of time.
•
•
•
The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been
dropped.
When connected to a power outlet, power is always
flowing into your TV.To totally disconnect power, unplug
the power cord.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
•
•
Unplug the power cord before cleaning your TV.
When moving your TV from an area of low temperature
to an area of high temperature, condensation may form
in the housing. Wait before turning on your TV to avoid
causing fire, electric shock, or component damage.
•
•
•
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
The wall socket should be installed near your TV and
easily accessible.
•
•
A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
Only power of the marked voltage can be used for your
TV. Any other voltage than the specified voltage may
cause fire or electric shock.
•
•
•
Do not touch the power cord during lightning.To avoid
electric shock, avoid handling the power cord during
electrical storms.
Slots and openings in the back and bottom of the
cabinet are provided for ventilation.To ensure reliable
operation of your TV and to protect it from overheating,
be sure these openings are not blocked or covered. Do
not place your TV in a bookcase or cabinet unless proper
ventilation is provided.
Unplug your TV during a lightning storm or when it will not
be used for long period of time.This will protect your TV
from damage due to power surges.
Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
•
•
Never push any object into the slots and openings on
your TV cabinet. Do not place any objects on the top of
your TV. Doing so could short circuit parts causing a fire
or electric shock. Never spill liquids on your TV.
Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer
or local power company.
•
WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
your TV, unplug the power cord and contact your dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous use in this case may result in fire or electric
shock.
•
•
•
This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
•
Do not use your TV if any abnormality occurs. If any
smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to
repair your TV yourself.
The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
Avoid using dropped or damaged appliances. If your
TV is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric
shock.
CAUTION - These servicing instructions are for use by
qualified service personnel only.To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
•
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.
•
•
•
Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
h
Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
When unplugging your TV, hold the AC/DC power
adapter, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or
electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
•
•
To reduce risk of electric shock, do not touch the
connector with wet hands.
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire
or the like.
•
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lightning Protection
TELEVISION ANTENNA CONNECTION
PROTECTION
For added protection of the TV during a lightning storm or when
it is left unattended or unused for long periods of time, unplug
the TV from the wall outlet and disconnect the antenna or cable
system.
If an outside antenna/satellite dish or cable system is to be
connected to the TV,make sure that the antenna or cable system
is electrically grounded to provide some protection against
voltage surges and static charges.
Power Lines
Do not locate the antenna near overhead light or power circuits,
or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to
earth in the building installation.
Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
Electric Service Equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the TV
1
INSPECTING THE PACKAGE CONTENTS
INSTALLING THE TV
Before installing your new TV, take a moment to inspect the
package contents. Use the images below to ensure nothing is
missing or damaged.
After removing the TV from the box and inspecting the package
contents you can begin installing the TV.Your TV can be installed
in two ways:
•
•
On a flat surface, using the included stand
On a wall, using a VESA-standard wall mount (not
included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the
TV and keep it from falling over.However,the TV can still fall over if:
•
•
•
It is placed on an uneven, unstable, or non-level surface
It is pushed, pulled, or otherwise improperly moved
If an earthquake occurs and the TV is not properly
secured.
VIZIO LED HDTV
Remote control
with batteries
Quick Start Guide
TV stands
4 x T3 30mm
Power cord
Phillips screws
PACKAGE CONTENTS
TV ON STANDS
Download from Www.Somanuals.com. All Manuals Search And Download.
1
INSTALLING THE STAND
It is recommended that two people take part in the stand installation.
Remove any plastic wrapping from the TV and the stand.
Place the TV screen-down on a clean, flat surface.To prevent scratches or damage to the screen, place the TV on a soft surface such as a
blanket and avoid any sharp edges.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
INSTALLING THE STAND
Insert the left and right stands into the base of the TV.
Insert two (2) T3 30 mm Phillips screws (included) into the back of the TV
and tighten them using a Phillips screwdriver, to secure each stand to the TV.
When you are finished, place the TV on a stable, level surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting.To prevent
injury or damage to the TV, ask someone to help you.
D39h-C0
Screw Size:
M4
Hole Pattern:
100 mm (V) x 100 mm (H)
Weight w/o
Stand:
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
WALL MOUNT SCREW LOCATIONS
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV.
For some wall mounts, you may want to use cables
with right-angle connectors.This allows the TV to rest
closer to the wall.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Connections
2
USB - Connect USB thumb drive to play photo, music, or video.
HDMI - Connect HDMI device.
Optical Audio Out - Connect optical/SPDIF audio device, such as
home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as sound bar.
Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Component/Composite - Connect component or composite device.
HDMI - Connect HDMI device.
AC POWER - Connect AC power cord.
BACK PANEL
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Controls and Connections
2
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
Power - Press once to turn on the TV.
Press and hold to turn off the TV
Input - Press once to access the INPUT menu.
SIDE PANEL
Download from Www.Somanuals.com. All Manuals Search And Download.
8
2
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.
To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or
FRONT PANEL
Download from Www.Somanuals.com. All Manuals Search And Download.
9
2
USING THE REMOTE
INPUT
POWER
Turn the TV on or off.
Change the currently-displayed input.
A/V CONTROLS
INFO
Control USB media player.
Display the info window.
CLOSED CAPTIONS
Open the closed caption menu.
MENU
Display the on-screen menu.
EXIT
ARROW
Navigate the on-screen menu.
Close the on-screen menu.
OK
GUIDE
Display the info window.
Select the highlighted menu option.
BACK
V BUTTON
Go to the previous on-screen menu.
Open the USB media player.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
CHANNEL UP/DOWN
Change the channel.
MUTE
LAST
Turn the audio off or on.
Return to the channel last viewed.
NUMBER PAD
Manually enter a channel.
DASH
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
WIDE
Switch the display mode.
REMOTE CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
10
2
Replacing the Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and
(-) symbols inside the battery compartment.
3. Replace the battery cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Connecting Your Devices
3
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc.).
Cable/Satellite Box
DVD/Blu-ray Player
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on. Set the TV’s input to match
the connection you used (HDMI-1, HDMI-2, etc.).
Game Console
HDMI CABLE
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
BEST
COMPONENT CABLE
• ANALOG
• HD VIDEO (1080p)*
• STEREO AUDIO
BETTER
COAXIAL CABLE
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
AV CABLE
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
GOOD
* Maximum resolution
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
AV cables (or composite cables) are the traditional
way of connecting your devices to your TV. Video
signals are sent over the yellow connector while audio
is sent over the red and white connectors.
Coaxial cables are the traditional way of connecting
antennas and cable television signals to your TV.
Coaxial cables carry both audio and video signals
through a single connector.
• Video Resolutions up to 480i
• Analog Connection
• HD Video Resolutions up to 1080i
• Analog Connection
• Audio and Video Signals
• Audio and Video Signals
Y/V
L
R
Coaxial
GOOD
BETTER
Download from Www.Somanuals.com. All Manuals Search And Download.
13
3
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry high
definition video signals along with additional
audio connections. Colors are delivered with color
information split up three different ways over three
connectors for video (separated into red, blue and
green signals) and the left and right audio connectors
(red and white).
HDMI is the intelligent, all-digital interface that delivers
bothdazzlingqualityandunmatchedeaseofuse.HDMI
technology transmits crystal-clear digital video along
with multi-channel surround audio. HDMI-connected
devices have the ability to automatically adjust
themselves for optimal viewing.
• HD Video Resolutions up to 1080p
• Analog Connection
• HD Video Resolutions up to 1080p
• HD Audio
• Audio and Video Signals
• Digital Connection
• Audio and Video Signals
R
L
Pr/Cr Pb/Cb Y/V
HDMI
BETTER
BEST
Download from Www.Somanuals.com. All Manuals Search And Download.
14
3
CONNECTING AN AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver
or sound bar.
1. Verify that your device has an audio port that matches an
available port on the TV (optical, RCA, etc.).
Home Audio Receiver
VIZIO Sound Bar
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on.
• CEC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM,DTS,DOLBY DIGITAL
HDMI CABLE
BEST
OPTICAL/SPDIF CABLE
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
BETTER
RCA CABLE
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
GOOD
Download from Www.Somanuals.com. All Manuals Search And Download.
15
3
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
OPTICAL/SPDIF CABLE
HDMI CABLE
AV cables (or composite cables) are the
traditional way of connecting your devices to
your audio device. Audio signals are sent over
the red and white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI technology transmits crystal-clear digital
multi-channel surround audio through a single
HDMI cable. Audio Return Channel-enabled
(ARC) TVs allow audio to be sent over an already
connected HDMI cable, eliminating the need
for a separate audio cable. See Connecting an
• Quality Stereo Connection
• 2.0 Channel
• PCM Stream (Lossless)
• Dolby Digital 5.1 Channel
• Digital Connection
• CEC 2-way Communication
(Auto setup)
• PCM, DTS, Dolby Digital
• Analog Connection
• Audio Signal Only
• 2.0-5.1 Scaleable Lossless
Digital Audio Connection
• Audio Signal Only
• Audio and Video Signals
L
R
Optical/SPDIF
HDMI
GOOD
BETTER
BEST
Download from Www.Somanuals.com. All Manuals Search And Download.
16
3
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
Built-in Tuner
Built-in Tuner
Your TV
Your TV
With an HDMI ARC setup,the
audio connection between
your TV and home audio
receiver can be removed.
The HDMI cable will transmit
audio signal to and from
your TV with an all-digital
audio/video connection.
Without an HDMI ARC setup,
your TV will transmit audio
signals from the built-in
tuner and VIA apps to
your home audio receiver
through a separate audio
connection.
RCA (Audio)
HDMI
HDMI
Your Home Audio Receiver
Your Home Audio Receiver
HDMI
HDMI
Your Blu-ray Player
Your Blu-ray Player
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Completing the First-Time Setup
4
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
4. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
Before you begin the first-time setup:
•
Your TV should be installed and the power cord should
be connected to an electrical outlet.
•
•
Your devices should be connected.
If you have a wireless network, have the wireless
password ready.
5. If you have cable TV, select
whether you have a cable box
or if you connect the TV directly
to a cable from the wall.
•
If you are connecting to your network with an Ethernet
cable, connect it to the Ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote.The TV
powers on and the Setup App
starts.
Use the Arrow and OK buttons
on the remote to select the input
your TV source is connected to.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
Choose your mode.
Sel
e
c
t
S
t
o
r
e
D
o
r
-
s
t
ore display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
6. When you are finished, the message “Your VIZIO TV is set up”
will appear.
Store Demo
Home Use
The First-Time Setup is complete.
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Using the On-Screen Menu
5
Your TV features an easy-to-use on-screen menu.
NAVIGATING THE ON-SCREEN MENU
To open the on-screen menu, press the MENU button on the
remote.
To open the on-screen menu, press
the MENU button on the remote.
From this menu, you can:
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
•
•
•
•
•
•
•
•
Adjust the Picture settings
Adjust the Audio settings
Set the Sleep Timer
VIZIO
TV SETTINGS
Picture
Adjust the Channel settings
Set up Closed Captioning
Select input devices
Audio
While navigating the on-screen menu, you can press
the BACK button at any time to return to the previous
menu screen.The EXIT button will close the
on-screen menu.
Timers
Channels
Closed Captions
Devices
CC
Adjust TV settings
Access the Guided Setup
System
Guided Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
19
5
CHANGING THE INPUT SOURCE
CHANGING THE SCREEN ASPECT RATIO
External devices such as DVD players, Blu-ray Players, and
video game consoles can be connected to your TV.To use one
of these devices with your TV, you must first change the input
source using the Input menu.
TheTV can display images in five different modes:Normal,Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the screen aspect ratio:
To change the input source:
1. Press the WIDE button on the
1. Press the INPUT button on
the remote.The Input menu is
displayed.
remote.
Normal
Normal
Stretch
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
Panoramic
TV
2. Use the Up/Down Arrow
buttons or the INPUT button
Wide
Wide
• Normal preserves the content’s
original aspect ratio. Since the
4:3 aspect ratio is not large
on the remote to highlight the
input you wish to view and
press OK.The selected input is
displayed.
HDMI-1
HDMI-2
COMP
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
Input Name
• Stretch expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 720p/1080i source.
You can change the input names that appear on the
Input menu to make your devices easy to recognize.
39 for more information.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 480i/480p source.
• Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the
display image may appear distorted. If the program
is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and
bottom of the display image.
• Zoom expands images with black bars to fit the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
5
VIEWING VIDEO WITH THE MENU OPEN
VIZIO
When the on-screen menu opens, it covers the left-hand portion
of the picture. The picture can be displayed in three different
ways:
PICTURE
Picture Mode
Standard
+
Auto Brightness Control
-
Backlight
85
+
+
+
+
+
-
Brightness
50
50
59
0
• Full-sized and centered on the screen - The left-hand
-
Contrast
-
Color
portion of the picture covered by the menu.
-
Tint
-
Sharpness
9
More Picture
• Resized to fit - The entire picture is visible in the space to
Picture Mode Edit - PicModename
Color Calibration
the right of the menu.
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.To reduce video delay
(lag) when gaming, use Game mode.
• Full-sized and aligned to the right edge of the menu -
The picture extends off of the right side of the screen.
FULL-SIZED AND CENTERED
To change the position of the picture while the on-screen menu
is displayed:
VIZIO
1. Use the Arrow buttons on the
PICTURE
VIZIO
Picture Mode
Standard
+
remote to highlight
Video.
Resize
Auto Brightness Control
PICTURE
Picture Mode
Backlight
-
Backlight
85
+
+
+
+
+
-
Brightness
50
50
59
0
-
Standard
Contrast
-
Color
-
Tint
+
+
+
+
+
+
85
50
50
59
0
-
-
-
-
-
-
2. Press OK to cycle through the
-
Sharpness
9
More Picture
Brightness
Contrast
three display methods.
Picture Mode Edit - PicModeName
Color Calibration
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.To reduce video delay
(lag) when gaming, use Game mode.
3. Press the Up Arrow button on
Color
the remote to the menu.
Tint
Sharpness
More Picture
Picture Mode Edit
Color Calibration
9
RE-SIZED TO FIT
VIZIO
PICTURE
Picture Mode
Standard
+
Auto Brightness Control
-
Backlight
85
+
+
+
+
+
-
Brightness
50
50
59
0
-
Contrast
-
Color
-
Tint
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.To reduce video delay
(lag) when gaming, use Game mode.
-
Sharpness
9
More Picture
Picture Mode Edit - PicModeName
Color Calibration
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.To reduce video delay
(lag) when gaming, use Game mode.
FULL-SIZED AND ALIGNED
TO RIGHT OF MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
21
5
brighter, more vivid picture.
ADJUSTING THE PICTURE SETTINGS
• Game reduces throughput delays and optimizes the
Your TV display can be adjusted to suit your preferences and
viewing conditions.
picture settings for displaying game console output.
• Computer optimizes the picture settings for displaying
computer output.
When changes are made while a preset picture
mode is selected, an asterisk appears after the name
of the picture mode.These settings can be saved as
a new custom picture mode and the preset mode
can be reset to its default settings.
4. To manually change each of the picture settings, use the
Up/Down Arrow buttons on the remote to highlight that
picture setting, then use the Left/Right Arrow buttons to
adjust the setting:
• Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted
when starting from some picture modes.
To adjust the picture settings:
1. Press the MENU button on the
remote.The on-screen menu is
displayed.
• Brightness - Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to
distinguish details. When this setting is too high, the
picture may appear faded or washed out.
VIZIO
PICTURE
Picture Mode
Backlight
Standard
+
+
+
+
+
+
85
50
50
59
0
2. Use the Arrow buttons on the
remote to highlight Picture and
press OK.The PICTURE menu is
displayed.
-
-
-
-
-
-
Brightness
Contrast
• Contrast - Adjusts the white level of the picture. When
this setting is too low, the picture may appear dark. When
this setting is too high, the picture may appear faded
or washed out. If the setting is too high or too low, detail
may be difficult to distinguish in dark or bright areas of
the picture.
Color
Tint
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
Sharpness
More Picture
Picture Mode Edit
Color Calibration
9
• Color - Adjusts the intensity of the picture colors.
• Tint - Adjusts the hue of the picture.This setting is useful
in adjusting the flesh tones in the picture. If flesh appears
too orange, reduce the level of color before adjusting tint.
• Standard sets the various
picture settings to values
that meet
• Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high
definition) content; however, it will not produce detail that
does not otherwise exist.
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.To reduce video delay
(lag) when gaming, use Game mode.
ENERGY STAR® requirements.
• Calibrated sets the picture
settings to values perfect for
watching TV in a brightly-lit
room.
5. When you have finished adjusting the picture settings, press
BACK to adjust additional settings or EXIT.
• Calibrated Dark sets the picture settings to values
perfect for watching TV in a dark room.
• Vivid sets the picture settings to values that produce a
Download from Www.Somanuals.com. All Manuals Search And Download.
22
5
Adjusting the More Picture Settings
for mpeg files. Select Off, Low, Medium, or High.
To adjust the More Picture settings:
• Game Low Latency - Reduces video delay (lag) when
gaming. Select Off, or On.This option is not available for
devices connected using a coaxial cable.
1. From the PICTURE menu, use
the Arrow buttons to highlight
More Picture, and then press
OK.The MORE PICTURE menu is
displayed.
VIZIO
MORE PICTURE
• Picture Size & Position - Picture Size increases or
decreases the vertical and horizontal size of the
displayed picture. Picture Position adjusts the vertical
and horizontal positions of the picture to ensure the
image is centered and completely fills the screen. Use the
Left/Right Arrow buttons to adjust the horizontal position
of the displayed picture. Use the Up/Down Arrow buttons
to adjust the vertical position of the displayed picture.
Press the OK button when you are finished.
Color Temperature
Black Detail
Cool
Medium
Backlight Control
Reduce Signal Noise
Reduce Block Noise
Game Low Latency
Picture Size & Position
Film Mode
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
Low
Low
Auto
• Film Mode - Optimizes the picture for watching film.
• Color Temperature -
Adjusts the 'warmness' and
'coolness' of the white areas
of the picture. Select Cool,
Normal, or Computer.
Gamma
Select Auto or Off.
• Gamma - Sets the shape of the gamma curve. Use lower
values for bright room conditions and higher values
when it is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
• Cool produces a
3. When you have finished adjusting the More Picture settings,
blue-hued picture.
press BACK to adjust additional settings or EXIT.
• Normal is optimized for
television viewing.
• Computer optimizes the
picture for use as a
PC monitor.
• Black Detail - Adjusts the average brightness of the
picture to compensate for large areas of brightness.
Select Off, Low, Medium, or High.
• Backlight Control - Dynamically improves the contrast
ration of the picture by adusting the backlight. Select Off
or On.
• Reduce Signal Noise - Reduces background picture noise
when viewing analog sources.The function helps to correct
"speckle" noise with a slight reduction in sharpness.Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
Download from Www.Somanuals.com. All Manuals Search And Download.
23
5
Adjusting the Picture Mode Edit Settings
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use
the Arrow buttons to highlight
More Picture > Picture Mode
VIZIO
PICTURE MODE EDIT
Save Picture Mode
Lock Picture Mode
Reset Picture Mode
Edit, and then press the OK
button.The PICTURE MODE EDIT
menu is displayed.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
• Save Picture Mode - Saves
the settings for a custom
picture mode.
• Lock Picture Mode - Prevent/
allow changes to the
currently selected custom
picture mode. Select On or
Off.
• Reset Picture Mode - Resets
the picture mode settings to
factory default values.
3. When you have finished adjusting the Picture Mode Edit
settings, press BACK to adjust additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
5
Adjusting the Color Calibration Settings
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the Hue, Saturation,
and Brightness (HSB) color and 11 point white balance,turn color
channels off for testing, and display color bar, flat, and ramp test
patterns.
Color Calibration Settings allow you to make precise adjustments
to the picture and to create picture modes to save groups of
picture settings.
The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the
TV. Calibration requires specialized training, an input
with precisely set colors, and a specialized light meter.
To adjust the HSB color settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button.The COLOR
CALIBRATION menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and press the
To adjust the color calibra picture settings:
OK button.The Color Tuner menu is displayed.
1. From the PICTURE menu,
VIZIO
Color Tuner
use the Arrow buttons to
highlight Color Calibration
COLOR CALIBRATION
Red
0
Green
Blue
0
Cyan
Magenta
Yellow
Picture Mode*
Hue
0
5
0
0
0
0
0
0
25
-2
0
-14
0
and press the OK button.The
Color Temperature*
Saturation
Brightness
Offset
-1
-4
COLOR CALIBRATION menu is
Color Tuner
-24
0
-22
0
0
displayed.
Reset Color Temperature
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the OK
button to change the setting:
Gain
0
0
3. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, (these 3 adjust the color) Offset, or
Gain (these two adjust the color temperature) of the color
you wish to adjust. Press the OK button.
• Picture Mode - Not directly
selectable (reference only).
Changes to Hue,
4. Use the Left/Right Arrow buttons to adjust the value. When
Saturation, and Brightness are
saved here and indicated with
an asterisk (*).
you are finished press the OK button to save the setting.
5. When you have finished adjusting the Color Tuner settings,
press the BACK button to adjust additional settings or EXIT.
• Color Temperature - Not directly
selectable (reference only). Changes to Offset and Gain
are saved here and indicated with an asterisk (*).
Changes to Hue, Saturation, and Brightness are indicated with
an asterisk (*) on the Picture Mode setting.
• Color Tuner - Adjust the HSB color, RGB offsets, and
11-point white balance, and display calibration test
patterns.
Changes to Offset and Gain are indicated with an asterisk (*).
on the Color Temperature setting.
• Reset Color Tuner/Temperature - Prevent/allow changes
to the currently selected custom picture mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
5
To turn color channels off and on:
To adjust the 11 Point White Balance settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button.The COLOR
CALIBRATION menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
11 Point White Balance
2. Use the Arrow buttons to highlight Color Tuner, and then
Gain
5%
Red
0
Green
0
Blue
0
press the OK button.The Color Tuner menu is displayed ..
Color Tuner
Red
0
Green
Blue
0
Cyan
Magenta
Yellow
Hue
0
5
0
0
0
0
0
0
25
-2
0
-14
0
Saturation
Brightness
Offset
-1
-4
-24
0
-22
0
0
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button
and use the Left/Right Arrow buttons to adjust the value.
When you are finished press the OK button to save the
setting.
Gain
0
0
3. Use the Arrow buttons on the remote to highlight Red,
Green, or Blue.
4. Press the OK button to turn the color channel off or on. An X
3. When you are finished, press the BACK button to adjust
appears over a color channel that has been turned off.
additional settings or EXIT.
5. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at
the same time.
All changes here are saved to Color Temperature.
6. When you are finished with the color channels, press the
BACK button to adjust additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
5
To show or hide the Color Bar Test Pattern:
To show or hide the Flat Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTE Test Pattern menu is displayed.
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
SMPTE Test Pattern
Flat Test Pattern
Off
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to show the Color
Bar.
2. Use the Arrow buttons on the remote to highlight Off. Use
the Left/Right Arrow buttons to select the percentage
brightness for the flat test pattern. Selecting a percentage
immediately shows the flat pattern at that brightness.
—or—
To hide the Color Bar Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow
3. When you are finished, press the BACK button to adjust
buttons to highlight Off.
additional settings or EXIT.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
5
To show or hide the Ramp Test Pattern:
Creating a Custom Picture Mode
Custom picture modes allow you to save a group of custom
settings for various viewing conditions and video sources.
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
When changes are made while a preset picture mode is selected,
an asterisk appears after the name of the picture mode. These
settings can be saved as a new custom picture mode and the
preset mode can be reset to its default settings.
Ramp Test Pattern
Off
A custom picture mode only applies to the input
(HDMI-1, HDMI-2, COMP, AV, etc.) in use when it was
created. Each input can have up to six custom
picture modes.
2. Use the Arrow buttons on the remote to highlight Off. Use
the Left/Right Arrow buttons to select the color for the ramp
test pattern. Selecting a color immediately shows that color
ramp.
To create a custom picture mode:
1. Set the Picture Mode to an
VIZIO
existing custom setting. See
SAVE PICTURE MODE
—or—
<type custom name>
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
2. From the PICTURE menu, use
a
j
s
b c d e
f
g h i
the Arrow buttons to highlight
Picture Mode Edit and press
OK.The PICTURE MODE EDIT
menu is displayed.
3. When you are finished, press the BACK button to adjust
k
t
l
m n o p q r
additional settings or EXIT.
u v w x
y
7
z
8
0
9
1
2
3
4
5
6
.@#
.com Space
3. On the PICTURE MODE EDIT
menu, select Save Picture
Mode. The
Done
SAVE PICTURE MODE menu is
displayed.
4. Use the Arrow buttons to enter
a custom name using the
on-screen keyboard.
5. Highlight Done and press OK.
6. Press the EXIT button to exit the
menu screens.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
5
Locking and Unlocking the Custom Picture Modes
Deleting a Custom Picture Mode
Custom picture modes can be locked with a unique PIN to
prevent accidental changes to their settings.
Custom picture modes that are no longer needed can be
deleted.
To lock all custom picture modes:
Inputs assigned to a deleted custom picture mode
become assigned to the Calibrated picture mode.
VIZIO
1. From the PICTURE menu, use
LOCK PICTURE MODE
the Arrow buttons to highlight
Picture Mode Edit and
Create a picture control PIN to
prevent change to all custom
picture modes.
To delete a custom picture mode:
1. From the PICTURE menu, use
select Lock or Unlock Picture
Mode, then press OK. The
To delete the user created Custom 1 picture mode,
LOCK PICTURE MODE menu is
displayed.
the Arrow buttons to highlight
Picture Mode Edit and select
select the Delete button.
Delete
Cancel
Lock or Unlock Picture Mode,
then press OK.The DELETE
PICTURE MODE window is
displayed.
2. Use the Number Pad on your
remote to enter a unique
4-digit PIN.
Save
3. Highlight Save and then press
2. Use the Left/Right Arrow buttons to highlight Delete and
the OK button.
press OK.
Create a 4 digit passcode using the num-
ber keys on the remote.
4. Press the EXIT button to exit the
3. Press the BACK button to adjust additional settings or EXIT.
menu screens.
To unlock all custom picture modes:
5. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and
select Lock or Unlock Picture
Mode, then press OK. The
LOCK PICTURE MODE menu is
displayed.
6. Use the Number Pad on your remote to enter your 4-digit PIN.
7. Make any desired changes to the picture modes.
8. To relock picture modes, you must create a new 4-digit PIN.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
5
• Analog Audio Out - Sets the volume control properties
ADJUSTING THE AUDIO SETTINGS
for the 3.5mm (headphone jack) connector when
connected to a home theater audio system. Select
Variable to control the headphones’ volume from
the TV’s volume controls, or select Fixed to control
the headphones’ volume from your home theater
system controls. (Some external speakers can also be
connected to the 3.5mm connector.)
To adjust the audio settings:
1. Press the MENU button on the
VIZIO
remote.The on-screen menu
is displayed.
AUDIO
TV Speakers
On
On
0
Surround Sound
Balance
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK.The AUDIO menu
is displayed.
+
+
• Equalizer - Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
-
-
Lip Sync
0
Digital Audio Out
Analog Audio Out
Equalizer
PCM
Fixed
• Delete Audio Mode - Deletes a custom audio mode
created using the Equalizer Settings. See Deleting the
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
Delete Audio Mode
This option is cannot be selected if no custom audio
mode has been created.
• TV Speakers - Turns the
built-in speakers on or off.
4. When you have finished adjusting the audio settings, press
the BACK button to adjust additional settings or EXIT.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
• Surround Sound - Surround sound uses DTS TruSurround™
to deliver an immersive surround sound experience
from the TV’s internal speakers.TruSurround completes
the entertainment experience by providing deep, rich
bass and by delivering crisp details and clear, intelligible
dialog. Select On or Off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
You must select Bitstream for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Download from Www.Somanuals.com. All Manuals Search And Download.
30
5
Changing the Equalizer Settings
Deleting the Custom Audio Mode
The graphic equalizer has several pre-set modes and allows you
to create one custom mode.
To delete the custom audio mode that has been created:
1. Press the MENU button on the remote.The on-screen menu is
To select a pre-set audio mode:
displayed.
1. Press the MENU button on the remote.The on-screen menu is
2. Use the Arrow buttons on the remote to highlight Audio and
displayed.
press OK.The AUDIO menu is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
3. Use the Arrow buttons to highlight Delete Audio Mode and
press OK.The TV displays,“To delete the user created custom
audio mode, select the Delete button.”
press OK.The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Highlight Delete and press OK.
4. Use the Left and Right Arrow buttons to select an audio
mode (Flat, Dynamic, Center, Bass Boost, or Bright).The
equalizer bars change to reflect the mode.
5. Press the BACK button to adjust additional settings or EXIT.
5. Press the BACK button to adjust additional settings or EXIT.
To create, modify, or replace the single custom equalizer setting:
1. Press the MENU button on the remote.The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK.The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select any audio
mode as a starting point.
5. Use the Arrow buttons to highlight a frequency and then
press OK.
6. Use the Up and Down Arrow buttons to adjust the boost
(up) and attenuation (down) for the frequency.
7. Use the Left and Right Arrow buttons to select another
frequency, if desired, and adjust it.
8. Press the BACK button to adjust additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
5
Setting the Auto Power Off Feature
SETTING TIMERS
To help save energy, your TV is set by default to turn off after 10
minutes without a video or audio signal. This feature can be
deactivated.
This TV has several timers to save energy and to turn off when you
go to sleep.
To set the Auto Power Off feature:
Setting the Sleep Timer
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Auto Power Off.
1. Press the MENU button on the
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn
off when there is no signal, change the setting to Off or 10
minutes.
VIZIO
TIMERS
remote.The on-screen menu is
displayed.
Sleep Timer
Off
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK.The TIMERS menu is
displayed.
Auto Power Off
10 minutes
3. When you have finished setting the auto power off time,
press the BACK button to adjust additional settings or EXIT.
3. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time
after which you want the TV to
go to sleep: 30, 60, 90, 120, or
180 minutes. If you don’t want
the sleep timer to activate,
change the setting to Off.
4. When you have finished setting
the sleep timer, press the BACK
button to adjust additional
settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
5
Selecting a Channel Source
SETTING UP CHANNELS
1. On the remote control, press Input and use the Arrow button
You can use the TV’s Channels menu to:
to highlight TV (antenna icon), then press OK.
•
•
•
•
•
•
Select a Channel Source
Find channels
2. Press the MENU button, select Channels and press OK. The
VIZIO
CHANNELS
CHANNELS menu is displayed.
Perform a partial channel scan
Manually add channels
Select channels to skip
Channel Source
Find Channels
Antenna
3. On the CHANNELS menu, highlight Channel Source and
using the left/right Arrow buttons to select either Antenna or
Cable.
Partial Channel Search
Add Analog Channel
Skip Channel
Select language for analog
and digital channels
Finding Channels
Analog Audio
Stereo
The TV may need to scan for channels before it can display
programs and their associated information. A channel scan is
required for free over-the-air channels (using an antenna) and
cable channels from an out-of-the-wall connection (without a
cable box). Moving the TV to an area with different channels
requires the TV to scan for channels again.
Digital Language
English
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
VIZIO
highlight Find Channels and
FIND CHANNELS
press OK.The auto channel
Channels Found
scan begins.
Digital:
Analog: 19
18% Complete
Cancel
0
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
Cancel the channel scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
5
Adding New Channels
To add a single new analog channel:
Occasionally, you may need to add a new range of channels or
add a new analog channel.You can do this by using the Partial
Channel Scan and Add Analog Channel options.This is quicker
than scanning all possible channels.
1. From the CHANNELS menu,
highlight Add Analog Channel
and press OK.The ADD
ANALOG CHANNEL menu is
displayed.
VIZIO
ADD ANALOG CHANNEL
Enter Channel #
To add a range of new channels:
Add Channel
2. Highlight Enter Channel # and
use the Number Pad on the
remote to type the number of
the channel to be added.
1. From the CHANNELS menu, highlight Partial Channel
Search, and press OK.The PARTIAL CHANNEL SEARCH menu
is displayed.
2. Highlight Scan Mode and select the type of channel you
3. Highlight Add Channel and
press OK.The TV scans for the
channel.
are adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and type the channel where
you want to begin the scan. (Use the left Arrow button to
backspace. Use the Number Pad on the remote to type the
channel.)
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the left Arrow button to backspace.
Use the Number Pad on the remote to enter the channel.)
5. Highlight Start and press OK.The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
5
Skipping Channels
After a channel scan is completed, you may find that some
channels are too weak to watch comfortably.There may also be
some channels you do not want to view. You can remove these
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use
the parental controls. See Locking and Unlocking
To remove a channel:
1. From the CHANNELS menu,
VIZIO
highlight Skip Channel, and
press OK.The SKIP CHANNEL
menu is displayed.
SKIP CHANNEL
Test 0
Test 1
Test 2
Test 3
Test 4
Test 5
1
1
P
P
2. For each channel you wish
to remove, use the Up/Down
Arrow buttons on the remote
to highlight the channel and
press OK. A P appears to the
right of each channel you
select.
1-2
2
2-2
2-3
P
3. When you have selected all
of the channels you wish to
remove, press BACK to adjust
additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
5
Changing the Digital Audio Language
LISTENING TO ALTERNATE AUDIO
Some digital over-the-air (free), cable, and satellite channels
broadcast programs in more than one language.The TV’s Digital
Audio feature allows you to listen to audio in alternate languages.
Changing the Analog Audio Language
Some analog over-the-air (free) and cable channels broadcast
programs in more than one language. The TV’s Analog Audio
feature allows you to listen to audio in an alternate language
using Secondary Audio Programming (SAP).
Not all programs are broadcast in alternate
languages.The Digital Audio Language feature only
works when the program being viewed is being
broadcast in the language you select.
Not all programs are broadcast in SAP. The Analog
Audio Language feature only works when the
program being viewed is being broadcast with
Secondary Audio Programming.
1. From the CHANNELS menu,
VIZIO
highlight Digital Language
and press OK. The DIGITAL
LANGUAGE menu is displayed.
DIGITAL LANGUAGE
English
To use the Analog Audio feature:
Español
2. Select your preferred language:
Français
1. From the CHANNELS menu,
VIZIO
ANALOG AUDIO
English, Français, or Español
and press OK.
highlight Analog Audio and
press OK.The ANALOG AUDIO
Stereo
menu is displayed.
3. Press BACK to adjust additional
SAP
settings or EXIT.
Mono
2. Select Stereo, SAP (secondary
audio programming), or Mono.
Press OK.
3. Press BACK to adjust additional
settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
5
Changing the Appearance of Digital Closed Captions
SETTING UP CLOSED CAPTIONING
Digital closed captions can be displayed according to your
preference.See the diagram on the next page for an explanation
of the parts of the closed caption area.
Your TV can display closed captions for programs that include
them. Closed captions display a transcription of a program’s
dialogue.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
1. From the CLOSED CAPTIONS
VIZIO
DIGITAL STYLE
menu, use the Arrow buttons
to highlight Digital Style and
press OK.
Caption Style
Text Style
Custom
As Broadcast
Large
The Closed Captions menu does not appear when
an HDMI input is selected.
2. Use the Left/Right Arrow
buttons on the remote to
select Custom and press OK.
The DIGITAL STYLE menu is
displayed.
Text Size
Text Color
Green
Text Opacity
Text Edges
As Broadcast
As Broadcast
As Broadcast
Black
To activate or deactivate closed captions:
Text Edges Color
Background Color
Background Opacity
Window Color
Window Opacity
1. Press the MENU button on the
VIZIO
3. Use the Up/Down Arrow
buttons on the remote to
highlight the setting you wish
to change, then use the Left/
Right Arrow buttons to change
the setting:
remote.The on-screen menu is
As Broadcast
Red
CLOSED CAPTIONS
displayed.
Closed Captions
Off
CC1
CS1
As Broadcast
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSED CAPTIONS menu is
displayed.
Analog Closed Captions
Digital Closed Captions
Digital Style
• Caption Style - Choose
As Broadcast to keep
default settings or Custom
to manually change each
setting.
Select As Braodcase to display digital captions
as sent by the caption provider.The color and
size for the caption text and background can
still be customized.
3. Use the Arrow buttons on the
remote to highlight Closed
Captions and then use the
Left/Right Arrow buttons to
select On or Off.
• Text Style - Change the
font used for the closed
captioning text.
4. Use the Arrow buttons on
the remote to highlight either
Analog or Digital Closed
Captions.
• Text Size - Make the text larger or smaller.
• Text Color - Change the color of the text.
• Text Opacity - Change the transparency of the text.
5. Use the Left/Right Arrow buttons
on the remote to select the
• Text Edges - Change the effects at the edges of the text,
caption channel you wish to
display, then press BACK to
such as raising the edges or adding drop shadows.
adjust additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
5
• Text Edges Color - Change the color of the text edge
Typical choices include:
effects.
•
Opaque background, transparent window—Only a strip
of background appears behind the text, expanding as
• Background Color - Change the color of the
background directly behind the text.
the text appears.This is the typical "As Broadcast" mode.
• Background Opacity - Change the transparency of the
•
Opaque background and window in the same color—
When text appears, the entire line fills with color at once.
background directly behind the text.
• Window Color - Change the color of the closed
In the example below, the closed caption text is green, the
background is black, and the window is red.
captioning box.
• Window Opacity - Change the transparency of the
closed captioning box.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
Text
Background
CLOSED CAPTION TEXT SAMPLE
Window
CLOSED CAPTIONS SCREEN LAYOUT
Download from Www.Somanuals.com. All Manuals Search And Download.
38
5
RENAMING DEVICES ON THE INPUT MENU
Inputs can be renamed to make them easier to recognize on the
example, if you have a DVD player connected to the Component
input, you can rename that input to display “DVD Player.”
Input Port
To change the name of an input:
VIZIO
NAME INPUT
1. Press the MENU button on the remote.The on-screen menu is
HDMI-1
DVD_
DVD
Input Name
displayed.
2. Use the Arrow buttons on the remote to highlight Devices
Custom Name
and press the OK button.The DEVICES menu is displayed.
3. Highlight the input port that you want to name and press OK.
4. To use a preset input name:
a
j
s
b c d e
f
g h i
k
t
l
m n o p q r
u v w x
y
z
0
a. Highlight the Input Port row and press OK.
1
2
3
4
5
6
7
8
9
.@#
.com Space
b. Highlight the input name you want to use (HDMI-1,
Blu-ray, Cable Box, Computer, DVD, DVR, Game, or
Satellite) and press OK.
OK
Cancel
—or—
Select the input name from a list of
common device names (Blu-ray, Cable
Box, DVD, etc).
To enter a custom name:
a. Enter your custom name using the on-screen keyboard.
b. Highlight OK and press OK.
c. The Input Name changes to show the custom name that
you created.
5. When you have finished naming your input, press the BACK
button to adjust additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
5
Viewing System Information
CHANGING THE TV SETTINGS
To view a summary of the TV settings:
Using the System menu, you can:
1. Press the MENU button on the remote.The on-screen menu is
VIZIO
SYSTEM
•
•
View system information
displayed.
Change the on-screen
menu language
System Information
Menu Language
Time & Local Settings
Parental Controls
View Mode
2. Use the Arrow buttons on the remote to highlight System
English
and press OK.The SYSTEM menu is displayed.
•
Set the time zone and local
settings
3. Highlight System Information and press OK.
•
•
•
•
Set up parental controls
Select a view mode
4. Use the Up/Down Arrow buttons to scroll through the system
Wide
information.
CEC
Change the Wide settings
Power Indicator
Reset & Admin
Off
System information is used verify settings and the
firmware version.
Adjust the California Energy
Commission (CEC) settings
•
•
Adjust when the power
indicator is illuminated
5. When you are finished reviewing the system information,
press the BACK button to view or change additional settings
or EXIT.
Reset the TV settings and set
up administrative controls
View status information for the TV, remote,
current input and your network.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
5
Changing the On-Screen Menu Language
Setting the Time and Local Settings
Your TV can display the on-screen menu in different languages.
To ensure the correct time is displayed when you press the INFO
button, set the TV’s time zone:
To change the on-screen menu language:
1. Press the MENU button on the
1. Press the MENU button on the
VIZIO
TIME ZONE
remote.The on-screen menu is
displayed.
VIZIO
MENU LANGUAGE
remote.The on-screen menu is
displayed.
Alaska
2. Use the Arrow buttons on the
remote to highlight System and
press OK.The SYSTEM menu is
displayed.
English
Español
Français
Hawaii
Pacific
2. Use the Arrow buttons on the
remote to highlight System and
press OK.The SYSTEM menu is
displayed.
Mountain
Central
Eastern
Atlantic
3. Use the Arrow buttons on the
remote to highlight Time &
3. Use the Arrow buttons on the
remote to highlight Menu
Language and press OK. The
MENU LANGUAGE menu is
displayed.
Local Settings and press OK.
The menu headed by the local
date and time is displayed.
Newfoundland
Indiana
Arizona
4. Highlight Time Zone and press
OK.The TIME ZONE menu is
displayed.
4. Highlight your preferred
language (English, Español,
or Français) and press OK. All
screens will now be displayed
in the selected language.
5. Highlight your time zone and press OK.
6. Highlight Daylight Saving Time and press OK.The DAYLIGHT
SAVING TIME menu is displayed. Choose On if your locale
observes daylight savings time, Off if it does not, or Auto to
have your TV detect daylight savings automatically.
5. Press the BACK button to change
additional settings or EXIT.
7. Press the BACK button to change additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
5
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
The Parental Controls menu only appears when:
To enable or disable the Program Rating feature:
•
You are using the tuner to receive your TV signals, such as
when you are using an antenna for Over-the-Air signals
or when connected to cable TV directly from the wall (no
cable box).
From the PARENTAL CONTROLS menu, highlight Locks and
use the left/right Arrow buttons to select On (enable) or Off
(disable).
Locking and Unlocking Channels
•
You have a device connected using a composite video
cable or a coaxial cable, such as a VCR, satellite or
cable box, or DVR.
When a channel is locked, it will be inaccessible. Locking
a channel is a good way to prevent children from viewing
inappropriate material.
Accessing the Parental Controls Menu
To lock or unlock a channel:
To access the Parental Controls menu:
1. From the PARENTAL CONTROLS menu, highlight Channel
1. Press the MENU button on the remote.The on-screen menu is
Locks and press OK.The CHANNEL LOCKS menu is displayed.
displayed.
2. Highlight the channel you want to lock or unlock and press
2. Use the Arrow buttons on the remote to highlight System
OK.
and press OK.The SYSTEM menu is displayed.
3. When a channel is locked, the Lock icon appears locked.
The channel is not accessible unless the parental passcode
is entered.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
4. Enter your parental passcode. If you have not set a
passcode, enter the default, 0000.The PARENTAL CONTROLS
menu is displayed.
4. When a channel is unlocked, the Lock icon appears
unlocked.The channel is accessible.
To set a custom parental passcode, see Changing
Download from Www.Somanuals.com. All Manuals Search And Download.
42
5
Blocking and Unblocking Content by Rating
Changing the Parental Control Passcode
A channel may sometimes broadcast programs that are meant
for children, and at other times broadcast programs that are
meant for mature audiences. You may not want to block the
channel completely using a channel lock, but you may wish to
block certain programs from being viewed.
If you use the parental controls,you should change the passcode
to prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
When this is the case, you can use the TV’s Rating Block feature
to block content based on its rating.
and press OK.The CHANGE PIN menu is displayed.
2. In the New PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
For a list of content ratings and their definitions, visit
3. In the Confirm PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
To block or unblock content by its rating:
4. Write down your new parental control passcode and save it
in a secure location.
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
5. Press the EXIT button on the remote.
USA TV - USA television program broadcasts.
Resetting the Content Locks
USA MOVIE - USA movie broadcasts.
Canadian English - Canadian English television program
To reset the content locks to the factory-default settings:
broadcasts.
1. From the PARENTAL CONTROLS menu, highlight Reset Locks
and press OK.The TV displays,“Select Reset to restore
Parental Controls to the factory defaults.”
Canadian French - Canadian French television program
broadcasts.
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
2. Highlight Reset and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating and all higher ratings
cannot be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can
be viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
5
Setting up View Mode
Changing the Wide Setting
Your TV can display the screens in different modes.
To change the aspect ration:
To change the on-screen menu language:
1. Press the MENU button on the remote.The on-screen menu is
displayed.
1. Press the MENU button on the
VIZIO
remote.The on-screen menu is
2. Use the Arrow buttons on the remote to highlight System
VIEW MODE
displayed.
and press OK.The SYSTEM menu is displayed.
Viewport
2. Use the Arrow buttons on the
remote to highlight System and
press OK.The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the remote to highlight Wide and
Overlay
press OK.The aspect ratio options are displayed.
Centered Overlay
Ratio on page 20 for more information.
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK.The VIEW MODE
menu is displayed.
4. Highlight your preferred view
mode (Viewport, Overlay,
or Centered Overlay) and
press OK. All screens will now
be displayed in the selected
mode.
5. Press the BACK button to change
additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
5
Adjusting the CEC Settings
Turning the Power Indicator On or Off
The California Energy Commission (CEC) function on your
TV enables you to control HDMI-connected devices with the
included remote without any additional programming.
The Power Indicator on the front of your TV normally does not
glow when the TV is on.You can change this setting if you prefer
the light to be on.
To turn the Power Indicator Light on or off:
Not all HDMI devices support CEC. See your device’s
user manual for details.
1. Press the MENU button on the remote.The on-screen menu is
displayed.
To enable, disable, or adjust CEC settings:
2. Use the Arrow buttons on the remote to highlight System
and press OK.The SYSTEM menu is displayed.
1. Press the MENU button on the remote.The on-screen menu is
displayed.
3. Highlight Power Indicator and press OK.The POWER
INDICATOR menu is displayed.
2. Use the Arrow buttons on the remote to highlight System
4. Use the Up/Down Arrow buttons to select On or Off, then
and press OK.The SYSTEM menu is displayed.
press OK.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK.The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - To use CEC, you must select On.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the BACK button to change additional settings or EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
5
USING THE RESET & ADMIN MENU
USING THE GUIDED SETUP MENU
The TV’s Setup App can be used to easily set up the TV tuner.
To use guided setup:
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory
default settings.
1. Press the MENU button on the
VIZIO
remote.The on-screen menu is
displayed.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
GUIDED SETUP
Tuner Setup
2. Highlight Guided Setup and
press OK.
To restore the TV to its factory default settings:
3. Highlight the guided setup you
1. Press the MENU button on the remote.The on-screen menu is
want to use and press OK:
displayed.
• Tuner Setup - Set up the TV
2. Use the Arrow buttons on the remote to highlight System
tuner.
and press OK.The SYSTEM menu is displayed.
4. Follow the on-screen
instructions. When finished,
press the BACK button to
change additional settings or
EXIT.
3. Highlight Reset & Admin and press OK.The RESET & ADMIN
menu is displayed.
4. Highlight Reset TV to Factory Defaults and press OK.
5. If you have changed the default parental control passcode,
type it now.
The TV displays,“Select Reset to restore all TV settings to
factory defaults and clear all account information.”
6. Highlight Reset and press OK.
7. Wait for the TV to turn off.The TV will turn back on shortly
afterward and the Setup App will begin.
8. To view a demonstration of TV functions on start-up, select
Store Demo > On.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
5
USING THE INFO WINDOW
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
•
•
Press the INFO or GUIDE button one time to display
channel, input, and display information.
Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the
start and end times of the program.
Channel/Input Information
Display Information
28-1
KCET-HD
1080p
6:15pm
Normal
Dolby Digital+ Stereo
11:00AM - 12:00PM
Oliver’s Holiday Surprise
TV-PG-V
Oliver wakes up one morning only to discover that his pals are missing. In this
hour-long holiday special, Oliver goes on a journey in search of his pals. Who
knows what he’ll encounter on the way?
Program Description
Program Title/Rating Information
DIGITAL EPISODE GUIDE & INFO WINDOW
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Using the USB Media Player
6
Playing USB Media
To play your USB media:
USING THE USB MEDIA PLAYER
The USB Media Player allows you to connect a USB thumb drive to
your TV and play music, video, or photos.
1. Connect your USB thumb drive to the USB port on the side of
the TV.
USB PORT
2. Press the V button on the remote
.
3. Use the Arrow buttons to highlight the Multimedia app in
the V.I.A. Plus Dock and press OK. (The highlighted App is in
the center of the dock.)
4. Use the Arrow buttons to highlight the type of media to
display (Music, Video, or Photo) and press OK.
5. Use the Arrow buttons to highlight the file you want to
display. Press OK. Music or video files play, photos display.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
Removing the USB Drive from the TV
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
Preparing Your USB drive to Play USB Media
To play USB media, you must first save your files on a USB thumb
drive:
To safely remove your USB drive from the TV:
1. Turn off the TV.
•
•
The USB thumb drive must be formatted as FAT32.
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
Files on the USB thumb drive must end in a supported file
extension (.mp3, .jpg, etc.).
•
The player is not designed to play media from
smartphones.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
6
Folder Contents
This area displays the
Back Button
Back Button
contents of the currently
selected folder.You can
browse files and folders
using the Arrow and OK
buttons on the remote.
Highlight this button
and press OK to return
to the previous screen.
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
Connected
Sources
VIZIO
Photo
USB1:
Displays
VIZIO_2GB\Photo\root
connected USB
devices.
Current Folder
root
A.jpg
D.jpg
B.jpg
E.jpg
C.jpg
F.jpg
Start Fullscreen
Slideshow
Start Slideshow
Sort by Name or Date
View Thumbnails/Folders
Adjust Slideshow Settings
View Music Files
Sort:
Name A-Z
Thumbnails
Settings
View:
Browse Music
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
H.jpg
I.jpg
G.jpg
Page 1 of 1
Photo Information
Displays the name,
resolution, and file
size of the currently
selected photo.
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information
is displayed here.
PHOTO VIEWER
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Troubleshooting & Technical Support
A
Do you have questions? Find answers here:
SUPPORT.VIZIO.COM
Find help with:
•New product setup
•Connecting your devices
•Technical problems
•Product updates and more.
Live chat
support available
You can also contact our
award-winning support team:
Phone:
Email:
(877) 698-4946 (toll-free)
techsupport@VIZIO.com
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CSt)
Saturday - Sunday: 9 am to 6 pm (CSt)
Download from Www.Somanuals.com. All Manuals Search And Download.
A
The TV displays “No Signal.”
There is no sound.
•
Press the INPUT button on the remote control to select a
•
•
Press VOLUME UP on the remote control.
different input source.
Press the MUTE button on the remote to ensure mute is
off.
•
If you are using an antenna or cable TV connected
•
Check the audio settings. See Adjusting the Audio
•
•
•
Ensure the speakers are set to On.
There is no power.
Ensure no headphones are connected to the TV.
•
•
•
Ensure the TV is plugged into a working electrical outlet.
Check the audio connections of external devices
(Blu-ray player, game console, cable/satellite box) that
are connected to the TV.
Ensure the power cable is securely attached to the TV.
Press the POWER button on the remote or on the side of
the TV to turn the TV on.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The power is on, but there is no image on the screen.
•
•
Ensure all cables are securely attached to the TV.
Ensure all devices are connected correctly. Devices
differ; see your device’s user manual for details.
The sound is flat or dialog is not audible.
•
•
Adjust Brightness, Contrast, or Backlight. See Adjusting
•
Turn off Sound Leveling. See Adjusting the Audio
Press the INPUT button on the remote to select a
different input source.
The colors on the TV don’t look right.
•
Adjust the Color and Tint settings in the Picture menu.
•
Check all cables to ensure they are securely attached.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
A
The buttons on the remote aren’t working.
The TV has pixels (dots) that are always dark or always lit.
•
The Red and Yellow hot key buttons below the V button
•
Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly.These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
do not operate with this model.
•
•
Ensure you are only pressing one button at a time.
Point the remote directly at the TV when pressing a
button.
•
Replace the remote batteries with new ones. See
I see “noise” or static on the screen.
•
When your TV’s digital capabilities exceed a
digital broadcast signal, the signal is up-converted
(improved) to match your TV’s display capabilities.This
up-converting can sometimes cause irregularities in the
image.
The image quality is not good.
•
For the best image quality, view high-definition
programs using digital sources. Connect your devices
with HDMI cables.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the display image changes size.
The picture is distorted.
•
The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
•
Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
fluorescent lights.
•
•
Ensure all cables are securely attached.
The display image does not cover the entire screen.
•
If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Specifications
B
D39h-C0
39" Class
38.50"
Screen Size:
Viewable Area:
Dimensions w/ Stand:
w/o Stand:
34.75" x 22.68" x 8.27"
34.75" x 20.51" x 2.91"
Weight w/ Stand:
w/o Stand:
14.11 lbs
13.45 lbs
TV Type:
Refresh Rate:
Full Array LED
60 Hz (Effective Refresh Rate)
1366 x 768 (720p)
Maximum Resolution:
Pixel Pitch:
0.62475 mm (H) x 0.62475 mm (V)
200,000: 1
Dynamic Contrast Ratio:
Response Time:
6.5 ms
Viewing Angle:
178°/ 178°
HDMI Inputs:
Component Video Inputs:
Composite Inputs:
2
1
1
1
1
RF Antenna Input:
USB 2.0 Ports:
RCA Stereo,
Optical Digital
Audio Outputs:
OSD Language:
English, Spanish, French
Download from Www.Somanuals.com. All Manuals Search And Download.
53
B
D39h-C0
Remote Control Model:
Certifications:
XRT010
CSA-US, BETS-7/ICES-003, FCC Class B,
HDMI (CEC, ARC), Dolby Digital
Energy Star 6.1
COUNEE
Compliance:
NRCan
Voltage Range:
Power-On Consumption:
120V @ 60 Hz
36 W
Standby Power Consumption:
0.2 W
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Limited Warranty
C
ON PARTS AND LABOR
otherthanbyaVIZIOauthorizedservicecenter.Productswithunreadable
or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold
“AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized reseller.
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1)
year of non-commercial usage and ninety (90) days of commercial
use. If a Product covered by this warranty is determined to be defective
within the warranty period,VIZIO will either repair or replace the Product
at its sole option and discretion.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDINGVIZIO’S
NEGLIGENCE,ALLEGED DAMAGE, OR DEFECTIVE GOODS,WHETHER SUCH
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.VIZIO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946)
from 7:00AM to 11:00PM Monday through Friday and 9:00AM to 6:00PM
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that a Product is within the
warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are
warranted for the remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement, whichever is greater.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
Type of Service
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If this
occurs, your product will be restored to you configured as originally
purchased.You will be responsible for restoring all applicable data and
passwords.Recovery and reinstallation of user data is not covered under
this Limited Warranty.In order to protect your personal information,VIZIO
recommends that you always clear all personal information from the
unit before it is serviced, regardless of the servicer.
Defective Products must be sent to a VIZIO service center to obtain
warranty service.VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer. PRE-
AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO
SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection.VIZIOTechnical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
Zero Bright Pixel Defect Guarantee
This policy covers“zero bright pixel”defects for the duration of the limited
“ONE YEAR WARRANTY” on select new product purchases.To determine
if this guarantee applies to your product, refer to the “DETAILS” tab of
“zero bright pixel” guarantee on the box.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage
supply or power surges, signal issues, damages from shipping, acts of
God,any type of customer misuse,modifications or adjustments,as well
as installation and set-up issues or any repairs attempted by anyone
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Legal & Compliance
D
FCC Class B Radio Interference Statement
NOTE:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used
in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such
interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Other
Image(s) used under license from Shutterstock.com
Download from Www.Somanuals.com. All Manuals Search And Download.
56
© 2015 VIZIO INC.ALL RIGHTS RESERVED.
150417MH-US-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Taurus Group Cooktop Galexia User Manual
Taylor Scale 7340EXP User Manual
Toshiba Cordless Telephone SG 1801 User Manual
Toshiba CRT Television 27A35C User Manual
Toshiba Fax Machine GD 1220 User Manual
Ultra Products Computer Drive ULT31830 User Manual
Ultratec Telephone Miniprint 425 User Manual
Uniden Cordless Telephone UH041 User Manual
Verona Car Stereo System CR 43 User Manual
Vicks Fan HFS 641PC User Manual