VIZIO
QUICK START GUIDE
Model: E400-B2 & E480-B2
Download from Www.Somanuals.com. All Manuals Search And Download.
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly
trained and is based in the
United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Hours of operation:
Monday - Friday: 5 am TO 8 pm (pST)
Saturday - Sunday: 7 am TO 4 pm (pST)
Download from Www.Somanuals.com. All Manuals Search And Download.
We speak English • Se habla Español • Nous parlons Français
PACKAGE CONTENTS
VIZIO LED HDTV with Stand
Remote Control
with Batteries
This Quick Start Guide
Power Cord
7 x M4 14mm
Phillips Screws
(For E400-B2)
7 x M4 10mm
Phillips Screws
(For E480-B2)
Download from Www.Somanuals.com. All Manuals Search And Download.
DOWNLOAD THE FULL USER MANUAL
1
2
Page shown is for illustrative purposes only. Actual page content will vary.
Help VIZIO reduce paper waste.
You can download the Full User Manual under the
Product Downloads section of the Support tab.
Download the Full User Manual for your TV.
Using a computer, navigate to:
Enter the model number of the TV in the
space above.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE BASE
1
It is recommended that two people take part in the base installation.
Place the TV screen-down on a clean, flat surface.To prevent scratches or damage to
the screen, place the TV on a soft surface such as a blanket.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Align the neck with the base and snap it
into place.
Align the neck piece with the slot in the bottom of
the TV and slide it into place as shown.
Using a Phillips screwdriver, insert
Using a Phillips screwdriver, insert the remaining
four (4) screws into the holes on the back of the TV
and tighten them to secure the neck to the TV.
three (3) screws into holes on the bottom of
the base and tighten them to secure it to
the neck.
When you are finished, place the TV on a stable,
Download from Www.Somanuals.com. All Manuals Search And Downlloeavd.el surface.
FIRST-TIME SETUP
Connect all of your devices first.
Choose ONE connection type for each device.
1
Match colored connectors
to colored ports.
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK OF TV
HDMI CABLE
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
Commonly-Connected
Devices:
BEST
COMPONENT CABLE
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
Cable or Satellite Boxes
Blu-ray™ or DVD Players
Match colored connectors to colored ports.
COAXIAL CABLE*
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
AV CABLE
• ANALOG
• VIDEO (480i)*
GOOD
• STEREO AUDIO
Game Consoles
Match colored connectors to colored ports.
Download from Www.Somanuals.com. All Manuals Search And Download.
* Maximum Resolution
3
2
Remove the battery cover by pressing gently on
the VIZIO logo and sliding away from the remote.
Connect the power cord to the back of the TV.
The flat edge of the connector goes toward the
outside of the TV.
Insert the included batteries.
Plug the power cord into an electrical outlet.
Gently slide the battery cover back into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Turn the TV on by pressing the Power button on
The Setup App is displayed.
the remote.
Follow the on-screen instructions to complete
the first-time setup.
Use the Arrow buttons on the remote to highlight
Home Use and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
INPUT
POWER
Turn the TV on or off.
Change the currently-displayed input.
A/V CONTROLS
INFO
Control USB media player.
Display the info window.
CLOSED CAPTIONS
Open the closed caption menu.
MENU
Display the on-screen menu.
EXIT
ARROW
Navigate the on-screen menu.
Close the on-screen menu.
OK
GUIDE
Display the info window.
Select the highlighted menu option.
BACK
V BUTTON
Open the USB media player.
Go to the previous on-screen menu.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
CHANNEL UP/DOWN
Change the channel.
LAST
MUTE
Return to the channel last viewed.
Turn the audio off or on.
DASH
NUMBER PAD
Use with the number pad
to manually enter a digital
sub-channel.
Manually enter a channel.
WIDE
(For example, 18-4 or 18-5.)
Switch the display mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO RECOMMENDS
VIZIO CO-STAR STREAM PLAYER WITH 1080P FULL HD
The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience, turning
any HDTV into the ultimate smart TV*. Using the latest version of Google TV™, Co-Star decks out your existing
HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And with 1080p Full
HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment upgrade for any
high-definition television.
* Internet connection required and sold separately.
This Product Sold Separately
Download fromAWvwawi.lSaombalenuaalst.cwomw. Awll M.VanIZuaIOls .Sceaorcmh And Download.
HELP TOPICS
•
•
The on-screen menu has guided setup. Press MENU > Guided Setup. Select the type
of setup you need and press OK.The Setup App begins.
To reset the TV to factory defaults, press MENU > System > Reset & Admin > Reset TV
to Factory Defaults. Enter the Parental Control Passcode (the default code is 0000).
Select Reset. Remember that all of your settings will be lost.
How do I return to the
Setup App?
•
•
•
Press the VOLUME UP button on the remote.
Press the MUTE button on the remote to ensure that mute is off.
Press MENU, then select Audio. Be sure TV Speakers is set to On.
There is a picture, but
there is no sound.
•
•
Be sure your connected devices are turned on.
Press the INPUT button on the remote and select the input to which your device is
connected (TV, HDMI-1, COMP, etc.).
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
•
•
Note that some television channels add black bars to the picture.
Set the TV image mode so that the picture fills the screen. Press the WIDE button on
the remote until the screen is filled, and then press OK.
•
Adjust the video settings of your external device.
•
Be sure the power cord is securely connected to the AC socket on the TV and to a
working electrical outlet.
There is no power.
•
•
Press the POWER button on the remote.
If the above steps do not work, try plugging the power cord into a different outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
LEGAL
/
COMPLIANCE
FCC Class B Radio Interference Statement
Notice
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Caution
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for
each area.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
USA: UL
Germany:VDE
UK: BASE/BS
Japan: Electric Appliance Control Act
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canada: CSA
Image(s) under license from Shutterstock.com.
LIMITED WARRANTY
ON PARTS AND LABOR
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES,SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOYOU.THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,AND YOU MAY ALSO HAVE OTHER RIGHTS,WHICH VARY FROM STATE TO
STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship
for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use.If a Product covered
by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the
Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: [email protected] or via phone at
877 MY VIZIO (877.698.4946) from 5:00AM to 8:00PM Monday through Friday and 7:00AM to 4:00PM Saturday and
Sunday,PacificTime,or visit www.VIZIO.com.PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show
that a Product is within the warranty period.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
Parts and Labor
If your VIZIO product is capable of storing personal data and other information,ALL CONTENTS AND INFORMATION
WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product
will be restored to you configured as originally purchased.You will be responsible for restoring all applicable data
and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to
protect your personal information,VIZIO recommends that you always clear all personal information from the unit
before it is serviced, regardless of the servicer.
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new
or recertified atVIZIO’s option and sole discretion.Replacement parts and Products are warranted for the remaining
portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for
transportation costs to the service center,but VIZIO will cover return shipping to the customer.PRE-AUTHORIZATION IS
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new
product purchases.To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or
packaging that affords an equal degree of protection.VIZIO Technical Support will provide instructions for packing
and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.This warranty does not cover,for
example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges,
signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as
well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service
center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered.
This one year limited warranty does not cover Products sold “AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized
reseller.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 VIZIO INC.ALL RIGHTS RESERVED.
131205OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|