Toshiba CRT Television 32 154W User Manual

Contents  
SETTING UP  
Safety precautions Some do’s and don’ts for you to be aware of  
Installation and important information  
The remote control – an at-a-glance guide  
Connecting external equipment – a guide to connecting external equipment to the back of the television  
Connecting a computer – connecting a computer to the back of the television  
Controls and input connections – switching on the television, standby, using the controls on the television,  
headphone socket, connecting equipment to the side input sockets  
4
5
6
7
8
9
TUNING THE TELEVISION  
DIGITAL – tuning the television for the first time  
DIGITAL – auto tuning  
DIGITAL – programme sorting, manual tuning  
ANALOGUE – tuning analogue mode for the first time, language, country  
ANALOGUE – manual tune, broadcast system  
ANALOGUE – auto tune  
10  
11  
12  
13  
14  
15  
16  
ANALOGUE – programme skip, sorting programme positions  
CONTROLS AND FEATURES  
General controls – changing programme position  
Stereo and bilingual transmissions – stereo/mono or dual language broadcasts  
Time display (analogue only)  
17  
17  
17  
17  
18  
18  
19  
21  
Sound controls – volume, sound mute, bass/treble/balance  
Sound controls – bass boost, super woofer, dual (analogue only), stable sound®  
SRS WOW™ sound effects – SRS 3D, FOCUS and TruBass  
Widescreen viewing  
Picture controls – picture position (analogue only), back light  
Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,  
MPEG noise reduction (MPEG NR), digital noise reduction (DNR)  
Picture controls – colour temperature, 3D colour management, base colour adjustment  
22  
23  
Picture controls – active backlight control, cinema mode, antenna amplifier, automatic format (widescreen) 24  
Picture controls – 4:3 stretch, blue screen, side panel adjustment, picture still  
Panel lock – disabling the buttons on the television  
DIGITAL – programme timer  
25  
25  
26  
26  
27  
28  
29  
30  
31  
32  
Sleep timer  
DIGITAL – on-screen information and programme guide  
DIGITAL settings – parental controls (setting the PIN, mode)  
DIGITAL settings – favourite programmes, locked programmes, encrypted programmes  
DIGITAL settings – audio languages, audio output, subtitles, reset TV, common interface  
DIGITAL settings – software upgrade (version, automatic upgrade, searching for new software)  
PC settings – picture position, clock phase, sampling clock, reset  
Input selection and AV connections – input and output sockets for connected equipment,  
analogue switch off  
33  
TEXT SERVICES  
ANALOGUE text – setting up, general information, Auto. and LIST modes  
ANALOGUE text – control buttons  
DIGITAL interactive services – general information  
35  
36  
36  
PROBLEM SOLVING  
Questions and Answers – answers to some of the more common queries including  
manual fine tuning and colour system  
37  
INFORMATION  
Notes – for your own records  
Information – signal information  
Specifications and Accessories – technical information about the television, supplied accessories  
40  
41  
42  
Download from Www.Somanuals.co3m. All Manuals Search And Download.  
Installation and important information  
Where to install  
Locate the television away from direct sunlight and strong  
lights, soft, indirect lighting is recommended for comfortable  
viewing. Use curtains or blinds to prevent direct sunlight  
falling on the screen.  
Sturdy tie  
(as short as possible)  
Place on a sturdy platform, the mounting surface should be  
flat and steady. It must be secured to the wall with a  
sturdy tie using the clip on the back of the stand, or  
secured to the platform using the fixing strap located  
underneath the table top stand, this will prevent it  
from falling over.  
Clip  
Clip  
Clip  
The LCD display panels are manufactured using an  
extremely high level of precision technology, however  
sometimes some parts of the screen may be missing picture  
elements or have luminous spots. This is not a sign of a  
malfunction.  
Side View  
Top View  
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or  
damage the screen, and that small items cannot be inserted into slots or openings in the case.  
Please take note  
EXCLUSION CLAUSE  
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:  
i) fire;  
ii) earthquake;  
iii) accidental damage;  
iv) intentional misuse of the product;  
v) use of the product in improper conditions;  
vi) loss and/or damage caused to the product whilst in the possession of a third party;  
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s  
manual;  
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with  
associated equipment;  
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited  
to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or  
misuse of the product.  
NOTE: A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand is used the  
product’s BEAB approval will become void and the equipment is then used at the consumers own risk.  
If stationary images generated by text services, channel identification logos, computer displays, video games, on screen menus, etc.  
are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the  
brightness and contrast settings.  
Download from Www.Somanuals.co5m. All Manuals Search And Download.  
The remote controlUP  
Simple at-a-glance reference of your remote control.  
To select mode  
For On/Standby mode  
Number buttons  
To return to the previous programme  
To select input from external sources  
To switch between ATV (analogue  
television) and DTV (digital television)  
To change programme positions and  
text pages  
To alter the volume  
On-screen Menus  
To mute the sound  
To exit Menus  
When using menus the arrows move the  
cursor on the screen up, down, left or  
right. OK to confirm your selection  
To display the digital on-screen  
To switch between TV, Radio and Favourite  
programmes when in digital mode  
Programme Guide  
Text and interactive service control buttons  
Selectable picture preferences  
Widescreen viewing  
To display digital on-screen information  
To call up text services in analogue mode  
and interactive services in digital mode  
When in TV mode:  
When using a TOSHIBA VCR or DVD:  
u
Still picture  
press  
/
to PAUSE/STEP  
ll  
r
m
OI/II Stereo/bilingual transmissions  
press to PLAY  
r
SUBTITLE  
Digital Subtitles  
Time display  
press  
press  
press  
to REWIND  
q
/
8 9  
to FAST FORWARD  
When using the Programme Guide:  
s
to EJECT  
– 24 hours  
+ 24 hours  
– 1 page  
l
q
w
l
press to STOP  
s
p
q
s
press  
press  
to SKIP-REWIND  
l
q
+ 1 page  
to SKIP-FORWARD  
l
s
Inserting batteries and effective range of the remote  
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the  
right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.  
Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries  
immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated  
disposal area. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.  
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle  
of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may  
need replacing.  
Download from Www.Somanuals.co6m. All Manuals Search And Download.  
Connecting external equipment  
Before connecting any external equipment, turn off all main power switches. If there is no switch  
remove the mains plug from the wall socket.  
COMPONENT VIDEO (EXT3)  
SCART 2 (EXT2)  
SCART 1 (EXT1)  
CABLE HOLDER  
FIXING STRAP  
MEDIA REC.  
HDMI™ INPUT  
SOCKETS  
decoder*  
TV  
DIGITAL AUDIO  
OUTPUT  
(DTV MODE ONLY)  
COMMON INTERFACE  
media recorder  
The Common Interface is for a  
Conditional Access Module (CAM).  
Contact a service provider.  
IN/OUT SAT  
It is designed for best performance with 1080i and 1080p  
high-definition video signals but will also accept and display  
480i, 480p, 576i, 576p and 720p signals. NOTE: For  
1080p it is recommended that approved HDMI cable up to  
5m long is used. If the unit has DVI output a special  
conversion cable from DVI to HDMI will be required.  
Aerial cables:  
Connect the aerial to the socket on the rear of the television.  
If you use a decoder* and/or a media recorder it is essential  
that the aerial cable is connected through the decoder  
and/or through the media recorder to the television.  
SCART leads:  
PLEASE NOTE: Although this television is able to connect  
to HDMI equipment it is possible that some equipment may  
not operate correctly.  
Connect the video recorder IN/OUT socket to the television.  
Connect the decoder TV socket to the television. Connect  
the media recorder SAT socket to the decoder MEDIA REC.  
socket.  
A wide variety of external equipment can be  
connected to the back of the television, therefore the  
relevant owners manuals for all additional  
equipment must be referred to.  
Before running Auto tuning put your decoder and media  
recorder to Standby.  
We recommend SCART 1 for a decoder and SCART 2 for a  
media recorder. If connecting S-VIDEO equipment, set the  
INPUT for EXT2. See page 33.  
The phono sockets alongside the COMPONENT VIDEO  
INPUT sockets will accept L and R audio signals.  
The Digital Audio Output socket enables the connection of a  
suitable surround sound system. NOTE: this output is  
always active.  
If the television automatically switches over to monitor  
external equipment, return to normal television by pressing  
the desired programme position button. To recall external  
In addition there is a fixed external audio ouput which  
enables the connection of a suitable Hi-Fi unit. Make sure  
the Speaker option in the Sound menu is set to Off.  
equipment, press  
EXT3C, HDMI1, HDMI2, PC or ATV.  
to select between DTV, EXT1, EXT2,  
B
HDMI™ (High-Definition Multimedia Interface) is for use with  
a DVD, decoder or electrical equipment with digital audio  
and video output.  
HDMI, the HDMI logo, and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing, LLC.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a computer  
Before connecting any external equipment, turn off all main power switches. If there is no switch  
remove the mains plug from the wall socket.  
the back of your television  
Audio cable for PC to  
television connection  
(not supplied)  
Computer  
Mini D-sub  
15 pin connector  
RGB PC cable  
(not supplied)  
Conversion adaptor if required (not supplied)  
Connect the PC cable from the computer to the PC  
terminal on the back of the television.  
The following signals can be displayed:  
VGA: 640 x 480/60 Hz (VESA)  
VGA: 640 x 480/75 Hz (VESA)  
SVGA: 800 x 600/60 Hz (VESA)  
SVGA: 800 x 600/75 Hz (VESA)  
XGA: 1024 x 768/60 Hz (VESA)  
XGA: 1024 x 768/70 Hz (VESA)  
XGA: 1024 x 768/75 Hz (VESA)  
WXGA: 1280 x 768/60 Hz (VESA)  
WXGA: 1280 x 768/60 Hz (VESA) – Reduced Blanking  
WXGA: 1280 x 768/75 Hz (VESA)  
WXGA: 1360 x 768/60Hz (VESA)  
SXGA: 1280 x 1024/60 Hz  
Connect the audio cable to the PC/HDMI1 Audio  
socket on the back of the television. Select PC from the  
PC/HDMI1 audio options in the AV connection  
menu located in the SET UP menu.  
Press the  
to select PC mode.  
B
PLEASE NOTE:  
Some PC models cannot be connected to this  
television.  
An adaptor is not needed for computers with a DOS/V  
compatible mini D-sub 15 pin terminal.  
SXGA: 1280 x 1024/75 Hz  
IMPORTANT NOTE: SXGA will display but it will  
not be to VESA standards.  
A band may appear at the edges of the screen or parts  
of the picture may be obscured. This is due to scaling  
of the picture by the set, it is not a malfunction.  
When connecting a PC using HDMI the following  
signals can be accepted:  
When PC input mode is selected some of the  
television’s features will be unavailable e.g. Manual  
setting in the SET UP menu, Colour, Tint, DNR and  
Black Stretch in the Picture settings menu.  
1080i 50/60Hz  
1080p 50/60Hz  
720p 50/60Hz  
Download from Www.Somanuals.co8m. All Manuals Search And Download.  
Controls and input connections  
A wide variety of external equipment can be connected to the input sockets on the side of the television.  
Whilst all the necessary adjustments and controls for the television are made using the remote control, the  
buttons on the television may be used for some functions.  
RED LED – Standby  
GREEN LED – Power on  
Standby  
GREEN LED – Active standby (digital only)  
GREEN LED – Timer (analogue only)  
INPUT 3  
(EXT3)  
To use the options press the  
remote control to move up and down through them and  
OK, or to select the required choice. Follow the on  
screen instructions. The functions of each menu are  
described in detail throughout the manual.  
f
and  
e
button on the  
Switching on  
z x  
If the RED LED is unlit check that the mains plug is  
connected to the power supply. If the picture does not  
appear press  
moments.  
on the remote control, it may take a few  
i
Using the controls and connections  
To put the television into Standby press  
control, the GREEN active standby LED will appear  
(see ‘Software Upgrade’ section) next to the RED for a few  
moments then disappear. To view the television press  
on the remote  
i
To alter the volume press —  
To alter the programme position press  
Press MENU and , Q or P to control the sound  
j
+.  
e
f
F
.
i
again. The picture may take a few seconds to appear.  
,
S R  
and picture options.  
Using the remote control  
Press MENU twice to finish.  
When connecting sound equipment to EXT3, connect  
the audio output of the equipmentto thephono sockets  
on the television.  
Press the MENU button on the remote control to see  
the menus.  
In digital mode the menu bar at the top of the screens  
will show three different topics shown in symbols. As each  
To select the Input, press  
EXT3 as described on page 33. The television will  
automatically sense the type of signal.  
until the display shows  
B
symbol is selected by pressing the or  
remote control, its respective options will appear below.  
button on the  
z x  
Please always refer to the owner’s manual of the  
equipment to be connected for full details.  
In analogue mode the menu appears as a list of five  
topics. As each symbol is selected by pressing the or  
z x  
Please note: Inserting the headphone plug will mute the  
sound from all speakers.  
button on the remote control, its respective options will  
appear below.  
Download from Www.Somanuals.co9m. All Manuals Search And Download.  
Tuning Digital television for the first time  
Before switching on the television put your decoder and media recorder to Standby if they are connected  
and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed  
on page 6.  
Press the  
button, the LOCAL OPTIONS screen  
When the search is complete the television will  
automatically select programme one.  
i
1
will appear. This screen will appear the first time  
that the television is switched on and each time  
the television is reset.  
The AUTO TUNING screen will display the total  
number of services found.  
AUTO TUNING  
LOCAL OPTIONS  
94 programmes found  
Country  
UK  
58 TV  
Press OK to watch programme  
Prog. Name Type UHF Quality  
27 Radio  
9
Text  
Language  
ENGLISH  
ENGLISH  
Audio Language  
Audio Output  
Subtitles  
PCM  
OFF  
1
2
BBC ONE  
BBC TWO  
34  
34  
GOOD  
GOOD  
Local Time Settings  
Continue  
0
3
4
5
6
ITV1  
31  
31  
48  
31  
GOOD  
POOR  
GOOD  
POOR  
Channel 4  
Five  
ITV2  
Press  
e
to highlight Country and or to  
z x  
Change  
Page Up  
Watch  
2
select. The television will now tune the stations for  
your country.  
Page Down  
Sort  
Using  
select.  
e
highlight Language, then or to  
z x  
Use  
e
or  
f
to move through the list to select a  
3
4
5
programme then press OK to view.  
Press OK to start tuning.  
NOTE: The time will be set automatically by  
transmission but can be advanced or decreased  
by up to 2 hours using Local Time Settings.  
The AUTO TUNING screen will appear and the  
television will start to search for available stations.  
The progress bar will move along the line.  
You must allow the television to complete  
the search.  
AUTO TUNING  
Progress  
Prog. Name  
Type UHF Quality  
70  
87  
CBBC Channel  
Community  
34  
21  
GOOD  
POOR  
EXIT Cancel  
Download from Www.Somanuals.c1om0. All Manuals Search And Download.  
Digital auto tuning  
NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.  
You must allow the television to complete  
the search.  
Auto tuning  
When the search is complete the Auto tuning  
screen will display the total number of services  
found.  
Auto tuning will completely re-tune the television and  
can be used to up date the channel list.  
It is recommended that Auto tuning is run  
periodically to ensure that all new services are  
added. All current programmes and settings, i.e.  
favourites and locked programmes, will be lost.  
AUTO TUNING  
94 programmes found  
58 TV  
Press OK to watch programme  
Prog. Name Type UHF Quality  
27 Radio  
9
Text  
Press MENU, the SETUP MENU will appear.  
Use eto highlight Auto tuning. Press OK.  
1
1
2
BBC ONE  
BBC TWO  
34  
34  
GOOD  
GOOD  
A screen will appear warning that previous  
digital programmes and settings will be deleted.  
Press OK to continue with the Auto tuning.  
2
3
4
5
6
ITV1  
31  
31  
48  
31  
GOOD  
POOR  
GOOD  
POOR  
Channel 4  
Five  
ITV2  
WARNING  
Change  
Page Up  
Watch  
MENU Back  
!
All previous digital programmes and  
settings will be deleted.  
Continue?  
Page Down  
Sort  
YES  
Use  
e
or  
f
to move through the list to select a  
3
programme then press OK to view.  
Select MENU Cancel  
The television will start to search for all available  
stations.  
AUTO TUNING  
Progress  
Prog. Name  
Type UHF Quality  
70  
87  
CBBC Channel  
Community  
34  
21  
GOOD  
POOR  
EXIT Cancel  
Download from Www.Somanuals.c1om1. All Manuals Search And Download.  
Digital programme sorting,  
manual tuning  
NOTE: When the television is switched off the mode being viewed at the time will automatically be selected  
when the television is switched back on.  
Use  
e
or  
f
to move through the list to your  
4
5
Programme sorting  
preferred position. As you do so the other  
stations will move to make room.  
The station order may be changed to suit  
personal preference. Press MENU, the SETUP  
MENU will appear on screen.  
Press to store your move. Repeat as  
necessary, then press EXIT.  
z
1
2
Use  
e
to move down through the list and  
highlight Programmes. Press OK.  
Manual tuning  
This feature is available for service engineers or can be  
used for direct channel entry if the multiplex channel  
is known.  
SETUP MENU  
TV Setup  
OK  
OK  
OK  
Select Manual tuning from the SETUP MENU  
1
Local Options  
and press OK.  
Auto tuning  
Enter the multiplex number using the number  
buttons and then press OK. The television will  
automatically search for that multiplex.  
Manual tuning  
Programmes  
OK  
OK  
2
MENU Back EXIT Watch TV  
When the multiplex is found any channels not  
currently on the programme list will be added  
and the programme information at the top of  
the screen will be updated.  
With the list of stations now showing use  
to highlight the station you want to move and  
e
or  
3
f
press  
.
x
Repeat as necessary. Press EXIT to finish.  
3
The selected station will be moved to the right of  
the screen.  
PROGRAMMES  
Prog.  
1
Name  
BBC ONE  
2
3
4
5
6
BBC TWO  
ITV1  
Channel 4  
Five  
ITV2  
Sort  
Page Up  
Store MENU Back EXIT Watch TV  
Page Down  
Download from Www.Somanuals.c1om2. All Manuals Search And Download.  
Tuning Analogue mode for the first time  
The Quick Setup feature will tune all analogue channels currently available in the area. To put the  
television into ATV mode press the A/D button.  
Select ATV mode. The Quick Setup screen will  
appear.  
Manual tuning  
1
Prog.  
1
Channel  
Station  
C22  
C28  
C25  
C32  
BBC1  
2
3
4
BBC2  
ITV  
Quick Setup  
Select your language.  
CH4  
5
6
C68  
C69  
Language  
English  
Next  
OK  
Select  
Back  
Sort  
EXIT  
MENU  
EXIT  
OK  
Watch TV  
Watch TV  
Using or select your language, then press  
OK.  
Use  
e
or  
f
to move through the list to select a  
z x  
6
2
programme then press EXIT to view.  
Then press or to select your country.  
The station order may be changed using the  
Manual tuning screen (see the analogue  
‘Sorting programme positions’ section).  
z x  
3
4
To start Auto tuning press OK.  
Auto tuning  
Searching  
Channel  
EXIT  
:
C22  
Station : BBC1  
Stop  
The search will begin for all available stations.  
The slide bar will move along the line as the  
search progresses.  
5
You must allow the television to complete  
the search.  
When the search is complete the television will  
automatically select programme position 1 and  
the Manual tuning screen will appear.  
Download from Www.Somanuals.c1om3. All Manuals Search And Download.  
Analogue manual tune  
The television can be tuned-in manually using Manual tuning. For example: if the television cannot be  
connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.  
Use and to move across the screen and select any of these Manual Tune options.  
z x  
Programme  
skip  
Programme  
System  
Colour  
system  
Channel Search Manual fine  
tuning  
Station  
Programme: The number to be pressed on the remote control.  
System: Specific to certain areas.  
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from  
external source.  
Programme skip:  
means nothing has been stored or the facility to skip the channel is ON. See page 16.  
Channel: The channel number on which a station is being broadcast.  
Search: Search up and down for a signal.  
Manual fine tuning: Only used if interference/weak signal is experienced. See page 37.  
Station: Station identification. Use the  
f
or  
e
and or buttons to enter up to seven characters.  
z x  
To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,  
insert a pre-recorded film in the media recorder and press PLAY, then manually tune.  
Press MENU and using or select the SET UP  
Press OK to select. If the programme is skipped,  
Programme skip must be removed before  
storing.  
z x  
1
3
menu, with  
e
highlight Manual tuning, press  
OK to select.  
Manual tuning  
System  
0
I
A
C
60  
0
SET UP  
1/2  
OK  
Store  
Back  
Language  
English  
MENU  
EXIT  
Watch TV  
Country  
UK  
OK  
OK  
On  
Auto tuning  
Press to select System and use  
change if required.  
f
or  
e
to  
x
4
Manual tuning  
Antenna Amplifier  
AV connection  
Then press to select Search.  
x
5
6
OK  
MENU  
Back  
EXIT  
Watch TV  
Press  
f
or  
e
to begin the search. The search  
symbol will flash.  
Use  
f
or  
e
to highlight the programme position  
2
required e.g. we suggest Prog. 0 for a media  
Manual tuning  
Search: Up  
recorder.  
0
I
A
C
60  
0
Manual tuning  
OK  
Store  
Back  
MENU  
EXIT  
Watch TV  
Prog.  
0
Channel  
Station  
C60  
Each signal will show on the televeision, if it is not  
again to  
1
2
3
C22  
C28  
C25  
BBC1  
BBC2  
ITV  
7
your media recorder, press  
restart the search.  
f
or  
4
5
C32  
C69  
CH4  
OK  
Select  
Sort  
MENU  
EXIT  
Back  
Watch TV  
Download from Www.Somanuals.c1om4. All Manuals Search And Download.  
Analogue manual tune  
Auto tune  
continued,  
When your media recorder signal is found, press  
to move along to Station. With and  
8
Using Auto tuning  
f,  
e,  
x
z
put in the required characters, e.g. VCR.  
x
To set up the television using Auto tuning, press  
1
MENU and use or to select the SET UP  
z x  
Manual tuning  
Station  
menu.  
0
I
A
C
60  
0
V
C
R
OK  
Store  
Back  
MENU  
EXIT  
Watch TV  
SET UP  
1/2  
Press OK to store.  
Language  
English  
9
Country  
UK  
OK  
OK  
On  
Repeat for each programme position you want  
to tune or, press MENU to return to the list of  
channels and select the next number to tune.  
10  
Auto tuning  
Manual tuning  
Antenna Amplifier  
AV connection  
Press EXIT when you have finished.  
OK  
11  
12  
MENU  
Back  
EXIT  
Watch TV  
To name external equipment, e.g. DVD on EXT2,  
press  
to select  
2, then select Manual  
B
B
setting from the SET UP menu.  
Press  
select.  
e
to highlight Language and or to  
z x  
2
3
Press to select Label then using  
f
,
e
,
and  
x
z
13  
put in the required characters. Press OK.  
x
Using  
e
highlight Country, then or to select.  
z x  
The television will now tune the stations for your  
country.  
Manual setting  
Label  
Press  
e
to highlight Auto tuning, then press OK.  
4
EXT2  
Store  
A
D
V
D
OK  
MENU  
Auto tuning  
EXIT  
Back  
Watch TV  
!
Previous settings will be lost  
Press EXIT for no change.  
Press OK to start Auto tune.  
!
This television has direct channel entry  
if the channel numbers are known.  
Select the Manual tuning screen in Step 3. Enter the  
Programme number, the System, then C for  
standard (terrestrial) channels or S for cable channels  
and the Channel number. Press OK to store.  
PLEASE NOTE  
MENU  
EXIT  
Back  
Watch TV  
To start Auto tuning press OK.  
5
You must allow the television to complete the search.  
When the search is complete the television will  
automatically select programme position 1. This may not  
be a clear picture, so the station order can be changed  
(see 'Sorting programme positions' section).  
Download from Www.Somanuals.c1om5. All Manuals Search And Download.  
Analogue programme skip,  
sorting programme positions  
Sorting programme positions  
Programme skip  
To prevent certain programmes from being viewed, the  
programme position can be skipped. The remote control  
must be removed as the channels will still be available using  
the number buttons. Programmes can then be watched as  
normal using the controls on the television, but the television  
will not show the skipped programme position.  
Channels may be moved and stored on the programme  
position of your choice.  
Select Manual tuning from the SET UP menu.  
1
2
With the list of stations now showing use  
to highlight the station you want to move and  
press  
e
or  
f
Select Manual tuning from the SET UP menu.  
1
.
x
Manual tuning  
The selected station will be moved to the right of  
the screen.  
Prog.  
1
Channel  
Station  
C22  
BBC1  
2
3
4
C28  
C25  
C32  
BBC2  
ITV  
Manual tuning  
Prog.  
1
Channel  
Station  
CH4  
C22  
BBC1  
5
6
C68  
C69  
2
3
4
C28  
C25  
C32  
BBC2  
ITV  
OK  
Select  
MENU  
Sort  
EXIT  
CH4  
Back  
Watch TV  
5
6
C68  
C69  
Use  
f
or  
e
to highlight the programme position  
2
Store  
MENU  
to be skipped and press OK to select.  
EXIT  
Back  
Watch TV  
Press to select Programme skip.  
x
3
4
Use  
e
or  
f
to move through the list to your  
3
4
preferred position. As you do so the other stations  
will move to make room.  
Use  
Press OK.  
f
or  
e
to turn Programme skip on.  
Press to store your move.  
z
on the screen indicates a skipped  
programme position.  
Repeat as necessary, then press EXIT.  
Manual tuning  
Programme skip : On  
1
I
A
C
22  
0
B
B
C
1
OK  
Store  
Back  
MENU  
EXIT  
Watch TV  
Press MENU and repeat from Step 2 or press  
EXIT.  
5
Each programme position has to be individually  
selected. To turn Programme skip off, repeat the  
procedure for each position.  
Skipped programme positions cannot be selected  
by PP and P Q or by the controls on the  
television, but can still be accessed by the number  
buttons on the remote control.  
Download from Www.Somanuals.c1om6. All Manuals Search And Download.  
General controls, stereo/bilingual  
transmissions, time display, sound controls  
Selecting programme positions  
Bass, Treble and Balance  
To select a programme position use the numbered  
buttons on the remote control.  
The sound controls are accessible in digital and  
analogue modes, as are most of the televisions features.  
Programme positions can also be selected using PP and  
P Q.  
In digital mode, press MENU and using  
highlight TV setup then press OK.  
e
1
To revert to the previous programme position press  
.
^
Use or to select SOUND.  
z x  
2
3
To display on-screen information i.e. programme position,  
In analogue mode, press MENU and or to  
select SOUND.  
z x  
+
i
channels or stereo/mono signal, press  
to cancel.  
. Press again  
Stereo and Bilingual transmissions  
SOUND  
1/2  
Dual  
Dual 1  
If stereo or dual language broadcasts are transmitted the  
word Stereo or Dual will appear on the screen each time  
programme positions are changed, disappearing after a  
few seconds. If the broadcast is not in stereo the word  
Mono will appear.  
Bass  
0
0
0
Treble  
Balance  
WOW  
OK  
Off  
Stable sound  
Stereo… Press OI/II to select Stereo or Mono.  
MENU  
Back  
EXIT  
Watch TV  
Bilingual… Bilingual transmissions are rare. If they are  
transmitted the word Dual will display. Choose the  
required programme number and if the word Dual  
appears press OI/II to select Dual 1, Dual 2 or Mono.  
Press  
e
to highlight Bass, Treble or Balance  
4
5
and or to change the setting.  
z x  
option to Off. Press  
When connecting toea Hi-fi unit, set the Speaker  
to highlight Speaker and  
or to select Off.  
z x  
The Time Display – analogue only  
The time display facility allows the current (text service)  
time to be seen on the television screen.  
SOUND  
2/2  
Speaker  
Off  
On  
70  
/
Press  
whilst watching a normal television  
8 9  
Bass boost  
Bass boost level  
broadcast to see a time display from the broadcaster. It  
will remain on screen for about 5 seconds.  
Sound controls  
MENU  
EXIT  
Back  
Watch TV  
Volume  
Press  
j
or  
j
+ to adjust the volume.  
Sound Mute  
Press once to turn the sound off and again to cancel.  
k
Download from Www.Somanuals.c1om7. All Manuals Search And Download.  
Sound controls  
continued,  
SRS WOW™ sound  
effects, dual, stable sound®  
WOW  
Bass boost  
SRS 3D  
On  
FOCUS  
TruBass  
Off  
Off  
Bass boost enhances the depth of the sound on the TV  
speakers. The difference will only be noticeable on sound  
with a strong bass.  
MENU  
EXIT  
Back  
Watch TV  
In the SOUND menu press  
e
to highlight Bass  
1
2
boost. Use or to select On.  
z x  
Press  
e
to highlight SRS 3D and using  
3
4
5
or select between On or Off.  
z x  
Then press  
or to select between On or Off.  
z x  
Highlight TruBass and use or to select Off,  
Low or High to suit your preference.  
Then press  
e
to highlight Bass boost level and  
using or adjust to suit your preference.  
z x  
e
to highlight FOCUS and press  
z x  
SOUND  
2/2  
Speaker  
On  
On  
70  
NOTE: This feature is not available through  
headphones.  
Bass boost  
Bass boost level  
Dual – analogue only  
If a programme or film is being broadcast with a  
MENU  
Back  
EXIT  
Watch TV  
soundtrack in more than one language, the DUAL feature  
allows selection between them.  
When an active Super Woofer is connected to the Woofer  
Out connection on the back of the television, select AV  
Select the SOUND menu.  
connection in the SET UP menu, press  
e
to highlight  
1
Woofer and using or select External. (See 'Input  
z x  
Use  
e
to highlight Dual then press or to  
z x  
Selection and AV Connections' section).  
2
choose between Dual 1 or Dual 2.  
SRS WOWsound effects  
Stable sound®  
SRS WOW™ is a suite of audio effects which use the  
stereo signals being broadcast to produce enhanced sound  
from the television’s speakers. If mono sound is broadcast  
only TruBass will be available.  
The Stable Sound feature limits high volume levels on the  
TV speakers, preventing the extreme changes in volume  
that can occur when channels are changed or a  
programme switches to a commercial.  
SRS 3D gives a rich sound experience, FOCUS  
concentrates the sound and gives the effect of it coming  
from the centre of the television, TruBass enhances the  
lower bass frequencies.  
Select the SOUND menu.  
1
Use  
e
to highlight Stable sound then press  
2
or to select On or Off.  
z x  
Press MENU and select the SOUND menu.  
1
Use  
f
or  
e
to highlight WOW then press OK.  
2
]
WOW, SRS and ]  
symbol are trademarks of SRS Labs, Inc.  
WOW technology is incorporated under license from SRS Labs, Inc.  
Download from Www.Somanuals.c1om8. All Manuals Search And Download.  
Widescreen viewing  
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.  
Press the  
button repeatedly to select between PC, Exact scan, Wide, Super Live 2, Cinema 2, 4:3,  
{
Super Live 1, Cinema 1, Subtitle and 14:9.  
SUPER LIVE 1  
This setting will enlarge a 4:3 image to  
fit the screen by stretching the image  
horizontally and vertically, holding  
better proportions at the centre of the  
image. Some distortion may occur.  
SUPER LIVE 2  
CINEMA 1  
If a ‘side panel format’ signal is being  
received this setting will enlarge the  
image to fit the screen by stretching  
the image horizontally and vertically,  
holding better proportions at the  
centre of the image. Some distortion  
may occur.  
When watching ‘letterbox format’  
films/video tapes, this setting will  
eliminate or reduce the black bars at  
the top and bottom of the screen by  
zooming in and selecting the image  
without distortion.  
CINEMA 2  
When watching ‘all sides panel format’  
films/video tapes, this setting will  
eliminate or reduce the black bars at all  
sides of the screen by zooming in and  
selecting the image without distortion.  
When subtitles are included on a  
letterbox format broadcast, this setting  
will raise the picture to ensure that all  
the text is displayed.  
SUBTITLE  
SUBTITLE  
Download from Www.Somanuals.c1om9. All Manuals Search And Download.  
Widescreen viewing  
continued  
Use this setting when watching a 14:9  
broadcast.  
14:9  
WIDE  
4:3  
Use this setting when watching a  
widescreen DVD, widescreen video  
tape or a 16:9 broadcast  
(when available). Due to the range of  
widescreen formats (16:9, 14:9,  
20:9 etc.) black bars may be visible  
on the top and bottom of the screen.  
Use this setting to view a true 4:3  
broadcast.  
FULL HD MODELS  
Use this setting when watching a  
1080 source, it will display the image  
as transmitted without scaling or  
cropping the picture.  
EXACT SCAN  
When using a PC connected via  
HDMI this setting will show the picture  
without over scan, i.e. WYSIWYG.  
PC  
Press the  
button and a list of all the widescreen formats will appear on screen.  
{
PC  
Use  
f
and  
e
to highlight the required format and OK to select.  
Exact Scan  
Wide  
When a PC is connected via HDMI it will be selectable in the widescreen format list.  
Super Live 2  
Cinema 2  
4:3  
Super Live 1  
Cinema 1  
Subtitle  
14:9  
Using the special functions to change the size of the displayed image (i.e. changing the  
height/width ratio) for the purposes of public display or commercial gain may infringe on  
copyright laws.  
Download from Www.Somanuals.c2om0. All Manuals Search And Download.  
Picture controls  
Most of the picture controls and functions are available in both digital and analogue modes. To access the  
required menus when in digital mode: press MENU and using  
select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the  
e
select TV setup, press OK then or to  
z x  
required menus when in analogue mode: press MENU and use or to select the desired menu.  
z x  
Picture position – analogue only  
Backlight  
The picture position may be adjusted to suit personal  
preference and can be particularly useful for  
external inputs.  
Adjusting the Backlight can improve the clarity of the  
screen when viewing.  
In the PICTURE menu press  
Picture settings, then press OK.  
e
to select  
1
In the SET UP menu press  
Picture position is highlighted.  
e
until  
1
PICTURE  
Picture settings  
SET UP  
Picture position  
2/2  
OK  
Off  
OK  
OK  
3D Colour management  
Base colour adjustment  
Active Backlight Control  
Cinema mode  
Quick Setup  
On  
On  
MENU  
EXIT  
Back  
Watch TV  
MENU  
EXIT  
Back  
Watch TV  
In the Picture settings menu press  
Backlight.  
e
to select  
2
3
Press OK to view the options available for the  
picture format that has been selected.  
2
3
Press  
or to adjust.  
z x  
Press  
f
and  
e
to select an option, then  
or  
z x  
to adjust the settings.  
Picture settings  
1/2  
The options alter depending on the widescreen  
format chosen and when viewing connected  
equipment.  
Backlight  
Contrast  
100  
100  
50  
50  
0
Brightness  
Colour  
In Cinema 2:  
Tint  
Picture position  
Sharpness  
0
Horizontal position  
Vertical position  
Reset  
0
0
MENU  
Back  
EXIT  
Watch TV  
OK  
MENU  
Back  
EXIT  
Watch TV  
To return to the original factory settings select Reset  
in the Picture position menu and press OK.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture controls  
continued  
Picture preferences  
MPEG NR – Noise Reduction  
This television offers the choice of personalising the picture  
style. Press to view the different styles available:  
When watching a DVD the compression may cause some  
words or picture elements to become distorted or pixelated.  
Using the MPEG NR feature reduces this effect by  
smoothing out the edges.  
m
Picture mode-1 to 3 are preset options and effect many  
features/settings within the television, Picture mode-M  
stores your own settings as detailed below:  
Select MPEG NR from the Picture settings  
menu.  
1
Select Picture settings from the PICTURE menu.  
1
Picture settings  
2/2  
Picture settings  
1/2  
Black stretch  
On  
Backlight  
100  
MPEG NR  
Low  
Auto.  
Cool  
Contrast  
Brightness  
Colour  
100  
50  
50  
0
DNR  
Colour Temperature  
Tint  
Sharpness  
0
MENU  
Back  
EXIT  
Watch TV  
MENU  
Back  
EXIT  
Watch TV  
Use or  
preference.  
to select a setting to suit your  
z x  
2
Use or  
Colour, Tint and Sharpness.  
to adjust the Contrast, Brightness,  
z x  
2
DNR – Digital Noise Reduction  
Black stretch  
DNR enables you to ‘soften’ thescreen representation of a  
weak signal to reduce the noise effect.  
Black Stretch increases the strength of dark areas of the  
picture which improves the definition.  
Select DNR from the Picture settings menu.  
1
In the Picture settings menu press  
e
until Black  
1
Picture settings  
2/2  
Stretch is highlighted.  
Black stretch  
On  
Picture settings  
Black stretch  
2/2  
MPEG NR  
Low  
Auto.  
Cool  
DNR  
On  
Colour Temperature  
MPEG NR  
Low  
Auto.  
Cool  
DNR  
Colour Temperature  
MENU  
Back  
EXIT  
Watch TV  
Use or  
to adjust. The differences may not  
z x  
MENU  
EXIT  
Back  
Watch TV  
2
always be noticeable (for the best result use lower  
settings as picture quality can be lost if the setting  
is too high).  
Press or  
to select between Onand Off. The  
z x  
2
effect depends on the broadcast and is most  
noticeable on dark colours.  
Download from Www.Somanuals.c2om2. All Manuals Search And Download.  
Picture controls  
continued  
Colour temperature  
Base colour adjustment  
The Base colour adjustment feature allows the  
adjustment of individual colours to suit personal  
preference. This can be useful when using an  
external source.  
Colour Temperature increases the ‘warmth’ or ‘coolness’  
of a picture by increasing the red or blue tint.  
In the Picture settings menu press  
Colour Temperature is highlighted.  
e
until  
1
In the PICTURE menu press  
e
to select  
1
Base colour adjustment, then press OK.  
Picture settings  
Black stretch  
2/2  
On  
MPEG NR  
Low  
Auto.  
Cool  
DNR  
PICTURE  
Colour Temperature  
Picture settings  
OK  
On  
OK  
On  
On  
3D Colour management  
Base colour adjustment  
Active Backlight Control  
Cinema mode  
MENU  
EXIT  
Back  
Watch TV  
Press or  
and Cool to suit your preference.  
to select between Normal, Warm  
z x  
2
MENU  
EXIT  
Back  
Watch TV  
3D Colour management  
Press  
adjust the settings.  
f
and  
e
to select an option, then to  
x
2
When 3D Colour management is selected it allows the  
‘Base colour adjustment’ feature to become available.  
Base colour adjustment  
Hue  
+2  
Saturation  
+6  
Brightness  
+4  
Red  
In the PICTURE menu press  
management.  
e
to select 3D Colour  
1
Green  
0
0
0
Blue  
0
0
0
0
0
0
Yellow  
Magenta  
Cyan  
0
0
0
0
0
0
PICTURE  
Reset  
OK  
Picture settings  
OK  
On  
OK  
On  
On  
MENU  
EXIT  
Back  
Watch TV  
3D Colour management  
Base colour adjustment  
Active Backlight Control  
Cinema mode  
To return to the original factory settings select  
Reset and press OK.  
MENU  
EXIT  
Back  
Watch TV  
Press or  
to select On or Off.  
z x  
2
Download from Www.Somanuals.c2om3. All Manuals Search And Download.  
Picture controls  
continued  
Active Backlight Control  
Antenna amplifier  
When Active Backlight Control is activated it will  
automatically optimise the backlighting levels for  
dark scenes.  
If the signal being received by the television is too strong,  
this may result in picture interference and/or a buzzing  
sound. Setting Antenna Amplifier to Off reduces the  
signal strength, and can help to remove the interference.  
In the PICTURE menu press  
e
to select Active  
1
Backlight Control.  
In the SET UP menu press  
e
until Antenna  
1
2
Amplifier is highlighted.  
With or select either On or Off.  
z x  
PICTURE  
Picture settings  
OK  
Off  
3D Colour management  
Base colour adjustment  
Active Backlight Control  
Cinema mode  
SET UP  
1/2  
Language  
English  
On  
On  
Country  
UK  
OK  
OK  
On  
Auto tuning  
Manual tuning  
Antenna Amplifier  
AV connection  
MENU  
EXIT  
Back  
Watch TV  
OK  
Press or  
to select On or Off.  
z x  
2
MENU  
Back  
EXIT  
Watch TV  
Cinema mode  
Automatic format (Widescreen)  
If there are lines or jagged edges in the film or programme  
being viewed, selecting Cinema mode can help correct  
this by smoothing out the picture.  
When this television receives a true Widescreen picture and  
Auto format is On, it will automatically be displayed in  
Widescreen format, irrespective of the  
television’s previous setting.  
In the PICTURE menu press  
mode.  
e
to select Cinema  
1
Press MENU and or  
to select the  
z x  
1
FUNCTION menu.  
PICTURE  
Picture settings  
OK  
Off  
FUNCTION  
3D Colour management  
Base colour adjustment  
Active Backlight Control  
Cinema mode  
Teletext  
Auto.  
Panel lock  
Auto format  
4:3 stretch  
Off  
On  
Off  
On  
On  
Blue screen  
Side panel  
On  
1
MENU  
EXIT  
Back  
Watch TV  
MENU  
EXIT  
Back  
Watch TV  
Press or  
to select On or Off.  
z x  
2
Press  
to select On or Off.  
e
to highlight Auto format, then or  
z x  
2
NOTE: When a DVD with subtitles is being played  
this mode may not work correctly.  
Download from Www.Somanuals.c2om4. All Manuals Search And Download.  
Picture controls  
panel lock  
continued,  
Side panel adjustment  
4:3 stretch  
When 4:3 stretch is activated the size switching system  
The Side panel feature lightens or darkens the band each  
side of the screen when in 4:3 or 14:9 format. This helps  
prevent image retention of the band and can also make  
viewing in bright or dark conditions more comfortable.  
changes 4:3 programs into a full screen picture.  
In the FUNCTION menu press  
4:3 stretch.  
e
to highlight  
1
In the FUNCTION menu press  
panel is highlighted.  
e
until Side  
1
2
Press or to adjust.  
z x  
FUNCTION  
Teletext  
Auto.  
Panel lock  
Auto format  
4:3 stretch  
Off  
On  
On  
Picture still  
This feature is used to hold a still image on the screen.  
Blue screen  
Side panel  
On  
1
Press  
u
to hold an image on the screen, press  
again to cancel.  
u
1
MENU  
EXIT  
Back  
Watch TV  
Press or to select On or Off.  
z x  
2
Panel lock  
Blue screen  
Panel lock disables the buttons on the television. All  
buttons on the remote control can still be used.  
When Blue screen is selected the screen will turn blue and  
From the FUNCTION menu select Panel lock  
the sound will be muted when no signal is received.  
1
and choose On or Off using or  
.
z x  
In the FUNCTION menu press  
Blue screen.  
e
to highlight  
1
FUNCTION  
Teletext  
Auto.  
FUNCTION  
Teletext  
Panel lock  
Auto format  
4:3 stretch  
On  
On  
Off  
Auto.  
Panel lock  
Auto format  
4:3 stretch  
Off  
On  
Off  
Blue screen  
Side panel  
On  
1
Blue screen  
Side panel  
On  
1
MENU  
Back  
EXIT  
Watch TV  
MENU  
EXIT  
Back  
Watch TV  
When Panel lock is On, a reminder will appear when  
the buttons on the television are pressed. If the standby  
button is pressed the television will switch off and  
can only be brought out of standby by using the  
remote control.  
Press or to select On or Off.  
z x  
2
Download from Www.Somanuals.c2om5. All Manuals Search And Download.  
The timers  
When all the details have been entered press OK  
to save the timer.  
5
Programme timer – digital only  
Auto-start VCR: If your Toshiba media recorder is AV link  
compatible setting this feature to YES will auto start/stop  
a recording.  
This feature will set the television to go to a specific  
channel at a certain time. It can be used to view a  
particular programme, or by setting the mode to daily or  
weekly, can be used to view a series of programmes.  
PLEASE NOTE: When a timed programme is about to  
start, an information screen will appear offering the option  
of watching or cancelling the programme. The menus and  
other channels will not be available during the timed  
programme unless the programme timer is cancelled.  
Press MENU and or to select the TIMER  
z x  
1
MENU.  
Sleep timer  
TIMER MENU  
Programme Timers  
OK  
The television can be set to turn itself off after a  
certain time.  
Press MENU and or to select the TIMER  
menu.  
z x  
1
MENU Back EXIT Watch TV  
Press  
press OK to select.  
e
to select Programme Timers, then  
2
3
TIMER  
Sleep timer  
01:30  
Press  
e
to select the first programme to be  
timed, then press OK. The SET TIMER menu will  
now appear on screen.  
Press  
f
and  
e
to go through the list adding the  
4
details of the programme to be timed by using  
MENU  
EXIT  
Back  
Watch TV  
the number buttons and and to make  
selections.  
z x  
Press  
e
to select the Sleep timer. Use the  
2
3
number buttons to set the required time. For  
example, to switch the television off in one and a  
half hours enter 01:30, or press or to  
increase/decrease in steps of 10 minutes.  
11:36 Mon, 11 Dec  
SET TIMER  
z x  
Programme  
Date  
Channel 4  
1
Mon, 11 Dec 2006  
11/12  
12:00  
12.30  
Press EXIT to finish.  
Start Time  
End Time  
Repeat  
ONCE  
Auto-start VCR  
Subtitles  
NO  
NONE  
Audio Language  
ENGLISH  
0
- 9 Enter Number  
Save Timer MENU Cancel  
Download from Www.Somanuals.c2om6. All Manuals Search And Download.  
Digital on-screen information and  
Programme Guide  
When viewing in digital mode, the on-screen information and programme guide give access to programme  
details for all available channels.  
Information  
Guide  
+
Select information by pressing  
, the  
Select the on-screen guide by pressing GUIDE, the  
guide screen will appear highlighting details of the  
channel and programme currently being viewed.  
This may take a few moments to appear.  
i
1
1
information screen will appear giving details of the  
channel and programme currently being viewed.  
ALL PROGS  
Channel 4  
11:36 Mon, 11 Dec  
12:00 News at Noon  
11:36 Mon, 11 Dec  
To Buy or Not to Buy  
ALL PROGS  
11:30 King of the Hill  
24 minutes left  
x
Monday  
12:00  
My Life For Sale  
I/II  
ENTERTAINMENT  
Five  
z11:00  
11:30  
12:30  
Bargain Hunt  
x
That’s What She Said: Hank in uncomfortable with his  
new colleague’s innuendo, and Dale tries to give up  
smoking. [S]  
ITV2  
BBC THREE  
BBC FOUR  
To Buy or Not  
BBC ONE  
BBC TWO  
ITV1  
Schools:  
This Morning  
ER  
Schools: Tes Sch The Daily Po Working L  
Vanessa’s  
Channel 4  
Five  
King of The H News at Noo Headland  
Showing also  
ITV Playalong: Izi starting in 4 minutes on ITV Play…  
Trisha Godd  
Five News  
Home and A Brainteas  
The Montel Will  
This is BBC THREE  
This is BBC FOUR  
Judge Jud Coronation S Emmerda  
This is BBC THREE  
Tune  
Page Up  
EXIT Watch TV  
Page Down  
TV/FAV Change progs  
Showing Also  
ITV2  
BBC THREE  
BBC FOUR  
ITV3  
Languages  
This is BBC FOUR  
Faith  
Where the Heart is  
Rumpole of th  
SKY THREE  
UKTV History  
More 4  
Tunisia, Egypt  
The Re-Inventors  
Animal Airpo Pop Years 2  
Seven Wonders of the In  
To see details offany of the other channels currently  
and  
e
to scroll up and down the  
2
available, press  
channel list. As the channel is selected details of the  
programme currently being broadcast will appear.  
H
Deal or No Deal  
Countdown  
War of  
+
i
Watch  
Page Up  
More info  
Page Down  
EXIT Watch TV  
Timers  
TV/FAV Change progs  
Pressing the YELLOW button will activate Showing  
also, giving details of programmes which have  
started on other channels.  
3
4
Press or for information of other  
programmes scheduled for the channel selected.  
z x  
2
3
To record the following programme, with the  
press  
f
and  
For details of eother channels currently available,  
to scroll up and down the  
information guide showing, press . The Tune  
x
option in the bottom section of the screen will  
change to Record, press OK. The SET TIMER  
screen will appear.  
channel list. As the channel is selected details of  
the programme currently being broadcast will  
appear, then press or  
.
z x  
11:36 Mon, 11 Dec  
News at Noon  
For information on a highlighted programme  
press . To set the timer for that programme  
4
5
+
i
press the BLUE button to bring up the  
004  
Channel 4  
12:00-12:30 Mon, 11 Dec  
SET TIMER  
Programme timers menu.  
NOTE: Recording can be set from both the  
information screen and guide. In order for the  
recording operation to work the media recorder  
must be AV link compatible.  
Start Time  
End Time  
12:00  
12:30  
Repeat  
ONCE  
Auto-start VCR  
Subtitles  
NO  
Press ly  
hours, press  
towmove the Guide forward by 24  
w
l to go back. Pressing  
y
or  
NONE  
Audio Language  
ENGLISH  
will move the Guide forwards or backwards a  
page at a time.  
0 - 9 Enter Number  
Save Timer MENU Cancel  
The details of the programme will have been  
added to the screen. Press OK to save.  
5
Download from Www.Somanuals.c2om7. All Manuals Search And Download.  
Digital settings – parental control  
In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. These  
can then only be accessed with a security code PIN when in digital mode.  
Setting the PIN  
Mode  
This feature locks various menus to prevent the television  
being retuned or the settings being overridden.  
Press MENU and to select the FEATURE MENU.  
x
1
In the PARENTAL CONTROL menu press  
select Mode.  
e
to  
1
2
FEATURE MENU  
PARENTAL CONTROL  
Parental Control  
OK  
OK  
Mode  
ON  
Favourite and Locked Programmes  
Favourites  
Change Pin  
OK  
ALL PROGS  
NO MODULE  
OK  
Common Interface Slots  
Software Upgrade  
MENU Back EXIT Watch TV  
MENU Back EXIT Watch TV  
Use or to choose between ON, LOCK  
z x  
MENU, LOCK INSTALL and OFF.  
Use  
e
e
to select Parental Control then press OK.  
When menus that have been locked are now  
selected they will only become available when the  
PIN is entered.  
2
3
Press  
to highlight Change Pin then press OK.  
PARENTAL CONTROL  
ON  
Mode  
Change PIN  
OK  
MENU Back EXIT Watch TV  
Using the number buttons enter a four digit  
4
number, when these have been entered the screen  
will ask you to confirm them by entering them  
again.  
DEFINE PIN NUMBER  
New PIN  
*
*
*
*
Confirm PIN  
0 - 9 Enter PIN EXIT Exit  
The PIN number is now set. To activate put the  
television into standby.  
Download from Www.Somanuals.c2om8. All Manuals Search And Download.  
Digital settings – favourite programmes,  
locked programmes, encrypted programmes  
Locking programmes  
Selecting favourite programmes  
Locked Programmes stops the viewing of digital  
channels, they can only be accessed by entering the PIN.  
Favourite Programmes creates a list of the digital  
channels that are watched most. Four lists can be created,  
these can be a mixture of television, text and radio channels.  
From the FEATURE MENU press  
Favourite and Locked Programmes.  
e
to select  
1
2
3
From the FEATURE MENU press  
Favourite and Locked Programmes.  
e
to select  
1
Press repeatedly to select the Locked  
x
Programme list.  
FAVOURITE AND LOCKED PROGRAMMES  
Prog. Type Name  
Fav-1 -2 -3 -4  
Use  
f
and  
e
to go through the list of channels  
1
2
3
4
5
6
BBC ONE  
BBC TWO  
ITV1  
pressing OK to select the ones required, a  
padlock will appear in the box.  
Channel 4  
Five  
FAVOURITE AND LOCKED PROGRAMMES  
Prog. Type Name  
Fav-1 -2 -3 -4  
ITV2  
1
2
3
4
5
6
BBC ONE  
BBC TWO  
ITV1  
Select  
MENU Back  
Page Down  
Page Up  
Select all  
Deselect all  
Channel 4  
Five  
ITV2  
Use fand  
e
to go through the list of channels  
2
3
pressing OK to select the ones required, a tick will  
appear in the box.  
Select  
MENU Back  
Page Down  
Page Up  
Lock all  
Unlock all  
Press to select List 2. Follow the same  
x
procedure to make the selection. When all  
favourites have been selected press MENU to  
return to the FEATURE menu.  
Press EXIT and put the television into standby.  
4
5
When the television is switched back on and any  
of the channels in the Locked Programme list  
are selected the PIN must be entered before they  
can be accessed.  
Use  
e
to highlight Favourites and or to  
z x  
4
select between ALL, TV, RADIO, FAV-1 and  
FAV-2. The number of favourites available  
depends on how many lists have been created.  
Encrypted programmes  
Selecting Encrypted Programmes allows all encrypted  
programmes to be shown in the programme list even if  
they are not available to select.  
FEATURE MENU  
Parental Control  
OK  
OK  
Favourite and Locked Programmes  
Favourites  
In the FEATURE MENU press  
f
or  
e
to select  
1
2
Encrypted Programmes.  
FAV-1  
NO MODULE  
OK  
Common Interface Slots  
Software Upgrade  
Use or to select ON or OFF.  
z x  
NOTE: CAMs (Conditional Access Modules) are  
available from service providers (see 'Common  
Interface' section)  
MENU Back EXIT Watch TV  
Press EXIT.  
5  
Using the P P Q buttons will now only access  
those channels in Favourite List 1 when FAV-1 is  
selected.  
Download from Www.Somanuals.c2om9. All Manuals Search And Download.  
Digital settings  
audio output, subtitles, reset tv,  
common interface  
continued  
– audio languages,  
Audio languages  
Subtitles  
This feature allows a programme or film to be viewed with  
a choice of soundtrack language, provided they are  
currently being broadcast.  
This feature will show subtitles on the bottom of the  
screen in the selected language provided they are being  
broadcast.  
In the LOCAL OPTIONS menu press  
Subtitles.  
e
to select  
In the SETUP MENU press  
Options.  
e
e
to select Local  
1
2
1
2
Use or to select an option.  
Press OK, then press  
Language.  
f
or  
to highlight Audio  
z x  
Reset TV  
LOCAL OPTIONS  
Country  
UK  
ENGLISH  
ENGLISH  
PCM  
Selecting Reset TV will delete all stored digital channels  
and settings. The television will return to factory settings  
and then auto tune.  
Local Options  
Audio Language  
Audio Output  
Subtitles  
In the SETUP MENU press  
highlighted.  
e
until Reset TV is  
OFF  
1
2
Local Time Settings  
11:19  
MENU Back EXIT Watch TV  
Press OK to select. A screen will appear warning  
that all digital settings will be lost, press OK to  
continue.  
Use or to select an option.  
z x  
3
The Welcome screen will appear, press OK to  
continue, the television will then auto tune.  
NOTE: If more than one soundtrack is available,  
use OI/II to select between them.  
Common interface  
Audio output  
The Common Interface Slot, situated on the back of the  
television, enables the insertion of a CAM (Conditional  
Access Module) and card. These are purchased from a  
service provider and allow additional subscription  
broadcasts to be viewed. For information see a  
service provider.  
When connecting a surround sound amplifier to the digital  
audio output (Sony/Philips Digital Interface Format  
[S/PDIF]), the following options can be selected.  
PCM: this mode outputs PCM format to the digital  
audio output socket.  
BITSTREAM: this mode outputs audio format (eg. Dolby  
Digital) to the digital audio output socket providing it is  
being broadcast. It will automatically mute the speakers.  
Insert the CAM and card into the Common  
1
Interface Slot, following the instructions provided  
with the CAM. A box will appear on screen to  
confirm that the CAM is loaded.  
In the LOCAL OPTIONS menu press  
Audio output.  
e
to select  
1
2
In the FEATURE MENU press  
Common Interface Slots.  
f
or  
e
to select  
2
3
Use or to select PCM or Bitstream.  
z x  
Details of the CAM should now be available. Use  
OK to select it. If two CAMs are inserted use  
or to select between the two.  
z x  
Download from Www.Somanuals.c3om0. All Manuals Search And Download.  
Digital settings  
continued  
– software upgrade  
Searching for new software  
Version  
If preferred, software upgrades can be searched for  
manually using Search for New Software.  
This feature can be used to check the version of software  
currently installed.  
In the SOFTWARE UPGRADE menu press  
f
or  
From the FEATURE MENU press  
Software upgrade. Press OK.  
f
or  
e
to select  
1
2
1
e
to select Search for New Software.  
SOFTWARE UPGRADE  
Version  
0.5  
OFF  
Auto upgrade  
FEATURE MENU  
Favourite and Locked Programmes  
Favourites  
Search for New Software  
OK  
OK  
ALL PROGS  
NO MODULE  
OK  
MENU Back  
EXIT Watch TV  
Common Interface Slots  
Software Upgrade  
Press OK. The television will automatically start  
searching for a software upgrade, the progress bar  
will move along the line.  
Encrypted Programmes  
OFF  
MENU Back EXIT Watch TV  
SEARCHING FOR NEW SOFTWARE  
Press  
f
or  
e
to select Version. Use or to  
z x  
2
Searching for a new software upgrade for  
this TV.  
select. When the software has been updated there  
will be a choice of two versions available.  
Searching  
EXIT Stop  
SOFTWARE UPGRADE  
Version  
0.5  
Auto upgrade  
ON  
If an upgrade is found the television will  
automatically start downloading, if not a screen  
will appear stating that an upgrade is unavailable.  
Search for New Software  
OK  
MENU Back  
EXIT Watch TV  
NO UPGRADE AVAILABLE  
!
There is no upgrade available at  
this time.  
Auto Upgrade  
Continue  
If Auto upgrade is selected the software will  
automatically update as each version becomes available,  
provided the television is on or in standby. If the television  
is on, a screen prompt will appear showing the software  
download taking place.  
In the SOFTWARE UPGRADE menu press  
to select Auto upgrade.  
f
or  
1
2
e
Use or to select ON or OFF.  
z x  
Download from Www.Somanuals.c3om1. All Manuals Search And Download.  
PC settings – picture position, clock phase,  
sampling clock, reset  
Picture position  
Sampling clock  
Connect the PC (as shown in the ‘Connecting a PC’  
section) and ensure that a picture is showing on the  
television screen. The picture position may now be  
adjusted to suit personal preference.  
Adjusting the Sampling clock alters the number of pulses  
per scan, this will clear vertical lines on the screen.  
In the SET UP menu press  
highlighted.  
e
until PC Setting is  
1
2
Press  
to select PC, then select PC Setting  
B
1
from the SET UP menu.  
Press OK to select, then  
clock.  
e
to highlight Sampling  
PC Settings  
1/2  
Horizontal position  
Horizontal width  
Vertical position  
Vertical height  
Clock phase  
0
–5  
0
SET UP  
Language  
English  
Country  
UK  
OK  
OK  
–5  
0
AV connection  
PC Setting  
Sampling clock  
0
MENU  
EXIT  
Back  
Watch TV  
MENU  
Back  
EXIT  
Watch TV  
Use or  
to adjust until the picture clears.  
z x  
3
1
Press OK. Press  
f
and  
e
to select an option,  
2
then or to adjust the settings.  
z x  
Reset  
PC Settings  
1/2  
To return to the original factory settings.  
Horizontal position  
Horizontal width  
Vertical position  
Vertical height  
Clock phase  
0
–5  
0
In the SET UP menu press  
highlighted.  
e
until PC Setting is  
–5  
0
Press OK to select, then  
e
to highlight Reset.  
2
3
Sampling clock  
0
Press OK.  
MENU  
EXIT  
Back  
Watch TV  
NOTE: When a PC is connected using HDMI none of  
these functions will be available.  
Clock phase  
The Clock phase matches the PC signal with the LCD  
display. Adjusting this can clear horizontal stripes and  
picture blur.  
In the SET UP menu press  
highlighted.  
e
until PC Setting is  
1
2
3
Press OK to select, then  
phase.  
e
to highlight Clock  
Use or  
to adjust until the picture clears.  
z x  
Download from Www.Somanuals.c3om2. All Manuals Search And Download.  
Input selection and  
AV connections  
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7  
for a clear view of the back connection recommendations.  
Most media recorders and decoders send a signal  
through the SCART lead to switch the television to the  
INPUT signal selection  
correct Input socket.  
This specifies the type of signal going into SCART 2 (EXT2)  
on the back of the television. Please refer to the  
manufacturers instructions for the connected equipment.  
Alternatively press the external source selection button  
until the picture from connected equipment is shown.  
B
This button must be used to view equipment connected  
In the SET UP menu press  
AV connection is highlighted, then press OK.  
e
until  
using the COMPONENT VIDEO INPUT (EXT3C).  
1
An S in the display e.g. 2S (EXT 2S), indicates the  
B
input is set for an S-Video signal.  
SET UP  
1/2  
Input selection  
Language  
English  
Country  
UK  
OK  
OK  
On  
At any time by pressing  
screen showing modes and all stored external  
a list will appear on  
B
Auto tuning  
1
Manual tuning  
Antenna Amplifier  
AV connection  
equipment. Use  
select.  
e
and  
f
to highlight and OK to  
OK  
MENU  
Back  
EXIT  
Watch TV  
ATV  
ATV  
PC  
HDMI2  
HDMI1  
PC  
HDMI2  
HDMI1  
With or select either AV or S-VIDEO as the  
required input for EXT2.  
z x  
2
3C  
2
1
DTV  
3C  
2
1
DTV  
B
B
B
B
AV connection  
B
B
PC/HDMI1 audio  
PC  
HDMI1 audio  
EXT1 output  
EXT2 input  
EXT2 output  
Woofer  
Digital  
DTV  
AV  
NOTE: When in digital mode ATV cannot be  
selected, in analogue mode DTV cannot be  
selected. To switch between DTV and ATV press  
the A/D button.  
DTV  
Internal  
MENU  
Back  
EXIT  
Watch TV  
HDMI™ displays equipment connected to Input  
HDMI on the back of the television. It is designed  
for best performance with 1080i high definition  
signals.  
If the colour is missing try the alternative setting.  
PC displays a computer connected to Input  
RGB/PC on the back of the television.  
Download from Www.Somanuals.c3om3. All Manuals Search And Download.  
Input selection and  
AV connections  
continued  
PC audio  
HDMI1 audio  
If the connected HDMI source does not support digital  
audio, plug the audio cable into PC/HDMI1 audio on the  
back of the television (as shown in the ‘Connecting a  
computer’ section), then use the HDMI1 audio settings.  
In order to receive sound from a connected PC, plug the  
audio cable into the back of the television (as shown in  
Connecting a computer’ section), then use the  
PC/HDMI1 audio settings.  
In the SET UP menu press  
AV connection is highlighted, then press OK.  
e
until  
In the AV connection menu press  
e
to highlight  
1
1
2
PC/HDMI1 audio and using select HDMI1.  
x
Then highlight HDMI1 audio and using or  
select Auto., Digital or Analogue.  
z x  
SET UP  
1/2  
AV connection  
Language  
English  
PC/HDMI1 audio  
HDMI1  
Country  
UK  
OK  
OK  
On  
HDMI1 audio  
EXT1 output  
EXT2 input  
EXT2 output  
Woofer  
Auto.  
DTV  
Auto tuning  
*
Manual tuning  
Antenna Amplifier  
AV connection  
AV  
DTV  
OK  
Internal  
MENU  
Back  
EXIT  
Watch TV  
MENU  
Back  
EXIT  
Watch TV  
Highlight PC/HDMI1 audio then use to select  
the PC option.  
x
2
If the sound is missing select an alternative  
setting.  
AV connection  
NOTE: HDMI1 supports digital and analogue  
PC/HDMI1 audio  
PC  
sound, HDMI2 is digital sound only.  
HDMI1 audio  
EXT1 output  
EXT2 input  
EXT2 output  
Woofer  
Digital  
DTV  
Certain formats of DVD disk may not output from  
this TV (32/44.1/48kHz and 16/20/24 bits are  
acceptable).  
AV  
DTV  
Internal  
MENU  
Back  
EXIT  
Watch TV  
Analogue switch-off  
NOTE: Selecting the PC option will force HDMI  
into digital audio.  
This is a digital television which is integrated to allow the  
use of both digital and analogue services. However,  
during the lifetime of this set it is very likely that  
analogue services will be switched off to allow for more  
new digital services.  
This ‘switch-off’ will happen in a number of phases,  
which will be advertised in your area well in advance.  
It is recommended that at each phase the television is  
re-tuned to ensure that existing and new digital  
services can be viewed without disruption  
HDMI, the HDMI logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing, LLC.  
(see the 'Auto tuning' section).  
Download from Www.Somanuals.c3om4. All Manuals Search And Download.  
Analogue text services – setting up,  
general information, Auto and LIST modes  
This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of  
viewing text – Auto will display Fastext, if available. LIST will store your four favourite pages.  
The sub-page you are viewing will be highlighted and, as  
the television loads any additional sub-pages the colour  
of the numbers will change, indicating that these pages  
Selecting modes  
have been loaded.  
The text character set will be automatically chosen by the  
language setting in the SET UP menu.  
These sub-pages will remain available to view until  
another page is chosen or, in normal TV mode, the  
channel is changed.  
Select Teletext from the FUNCTION menu.  
1
2
With or choose Auto. or LIST then press EXIT.  
z x  
Navigating pages using Auto.  
If Fastext is available four coloured titles will appear at  
the base of the screen.  
FUNCTION  
Teletext  
Auto.  
To access one of the four given subjects, press the  
relevant coloured button on the remote control.  
Panel lock  
Auto format  
4:3 stretch  
Off  
On  
Off  
For further information on your particular text system(s),  
see the broadcast text index page or, consult your local  
Toshiba dealer.  
Blue screen  
Side panel  
On  
1
MENU  
Back  
EXIT  
Watch TV  
Navigating pages using LIST  
Text information  
The four coloured choices at the bottom of the screen are  
numbers – 100, 200, 300 and 400, which have been  
programmed into the television’s memory. To view these  
pages press the relevant coloured buttons.  
/
/
The  
button:  
6 7  
/
/
To view text services press  
. Press again to  
6 7  
superimpose the text over a normal broadcast picture and  
again to return to normal viewing. Programmes cannot  
be changed until text is cancelled.  
To change these stored pages press the relevant coloured  
button and enter the 3 digit number. This number will  
change in the top left of the screen and in the coloured  
highlight.  
The first text page shown will be the initial page.  
Press OK to store. The bars at the bottom of the screen  
will flash white. Whenever OK is pressed all four  
page numbers showing at the bottom will be stored  
and the previous ones will be lost.  
Any text page can be accessed by entering the 3 digit  
page number using the numbered buttons, pressing the  
coloured buttons or pressing PP to advance to the next  
page and P Q to go back to the previous page.  
If OK is not pressed the selection will be forgotten when  
text is cancelled.  
Sub-pages  
If there are sub-pages they will automatically load into  
memory without changing the page on screen.  
Other pages may be viewed by entering the 3 digit page  
number – but DO NOT press OK or these pages will be  
stored.  
To access the sub-pages press  
to view them. A bar with numbers will appear on the side  
of the screen.  
then use PP and P Q  
X
Download from Www.Somanuals.c3om5. All Manuals Search And Download.  
Analogue text services – control buttons,  
Digital interactive services  
Below is a guide to the functions of the remote control text buttons.  
To select a page whilst viewing a  
To display the index/initial page:  
/
T
89 normal picture:  
Press  
to access the index/initial page. The one  
displayed is dependant on the broadcaster.  
T
/
Enter the page number then press  
, a normal  
8 9  
picture will be displayed. The television will indicate when  
the page is present by displaying the page number at the  
/
/
top of the screen. Press  
to view the page.  
6 7  
To display a page of text:  
/
/
6 7  
To display news flashes:  
Select the news flash page for the chosen text service  
/
/
/
Press  
to display text. Press again to  
superimpose text over a normal normal broadcast picture.  
Press again to return to normal television viewing.  
(see the index page of text service). Press  
. The  
8 9  
6 7  
news flashes will be displayed as and when they are  
/
broadcast. Press  
again to cancel the display.  
8 9  
Programmes cannot be changed until this has been done.  
The news flash page must be cancelled before  
changing programmes.  
To access sub-pages:  
X
For use with PP and P Q to view sub-pages when  
available.  
To reveal concealed text:  
r
Digital interactive services  
To discover the solutions on quiz and joke pages press the  
button.  
r
The digital interactive services are the up-to-  
date way of viewing service information, using  
computer-style formats, incorporating pictures  
and interactive views.  
To hold a wanted page:  
q
At times it is convenient to hold a page of text. Press  
q
and  
will appear in the top left of the screen. The  
page will be held on screen until the button is pressed  
again.  
q
They offer high quality on-screen images with multi-  
colour photographic still images, advanced text and  
graphics and are user-friendly. These services are free to  
anyone with a digital television, however, they are not  
available for all digital stations and are dependant on the  
broadcaster.  
To enlarge the text display size:  
s
Ensure that digital mode has been selected.  
Press TEXT, it may take a few moments to load.  
1
Press  
once to enlarge the top half of the page, press  
again to enlarge the bottom half of the page. Press again  
to revert to normal size.  
s
To navigate the pages and use the pull-down  
2
menus, use the coloured buttons and  
f,  
e,  
and as directed.  
z x  
Press TEXT again at any time to cancel.  
3
Download from Www.Somanuals.c3om6. All Manuals Search And Download.  
Questions and Answers  
Below are the answers to some of the most common queries.  
For more information go to www.toshiba.co.uk  
Why is the VCR/DVD picture in black and  
white?  
Why is there no sound or picture?  
Q
A
Q
A
Q
Check the television is not in standby mode. Check  
the mains plug and all mains connections.  
Check the correct input has been chosen,  
S-VIDEO or AV. See AV connections page 33.  
Why is there picture and sound interference on  
all digital and analogue channels?  
There is a picture, but why is there little or no  
colour?  
Q
A
The signal strength may be too strong. Set the  
Antenna Amplifier option in the SET UP menu  
When using an external source, for instance, a  
poor quality video tape, if there is little or no  
colour, improvements may sometimes be achieved. The  
colour is factory set to Auto. to automatically display the  
best colour system.  
A
to Off.  
What else can cause a poor analogue picture?  
Q
To check that you have the best colour:  
Interference or a weak signal. Try a different  
A
television station. Manual fine tuning may help.  
With the external source playing, select Manual  
1
setting from the SET UP menu.  
Select the Manual tuning menu. Highlight the  
1
station and press OK, then press to select  
x
Manual setting  
Manual fine tuning  
.
Colour system: Auto.  
Using for  
e
adjust to get the best picture and  
sound. Press OK and then EXIT.  
EXT2  
Store  
A
V
C
R
2
OK  
MENU  
EXIT  
Back  
Watch TV  
Manual tuning  
Manual fine tuning  
With for  
e
choose between Auto., PAL,  
1
I
A
C
22  
+2  
B
B
C
1
2
SECAM, NTSC 4. 43 or 3. 58.  
OK  
Store  
Back  
MENU  
EXIT  
Watch TV  
Why doesn’t the video/DVD being played show  
on screen?  
Q
A
Why don’t the controls on the front of the  
television work?  
Q
A
Q
A
Make sure the VCR or DVD player is connected to  
the television as shown on page 7, then select the  
Check that Panel lock is not ON.  
correct input by pressing  
.
B
Why doesn’t the remote control work?  
Why is there a good video picture but no sound?  
Q
A
Check the side switch on the remote control is in  
TV mode.  
Check the batteries aren’t dead or inserted incorrectly.  
Check all lead connections.  
Why is there a message permanently on the  
screen?  
Why is there a picture but no sound?  
Q
A
Q
A
Remove it by pressing  
+
i
.
Check the volume has not been turned down or  
that sound mute has not been selected.  
Download from Www.Somanuals.c3om7. All Manuals Search And Download.  
Questions and Answers  
continued  
What can be done if the PIN number has been  
forgotten?  
Why is the DTV main menu unavailable?  
Q
A
Q
A
Q
A
Another mode is selected. Press A/D to select DTV.  
Use the Master PIN code of 1276, then change to  
a number of your choice. Ensure that no-one else  
can use the Master PIN by removing the Owner’s Manual.  
Why are some of the menus locked?  
Why are there vertical stripes on the screen  
when in PC mode?  
Lock Menu has been enabled (see 'Parental  
Controls' page).  
Q
A
The Sampling clock may need adjustment. Select  
PC Setting from the SET UP menu, highlight  
Sampling clock and adjust until the lines clear.  
Why is the digital channel locked?  
Q
A
The channel has been selected in Locked  
Programmes (see 'Digital Settings' section).  
Why are there horizontal stripes and/or blurred  
images on the screen when in PC mode?  
Q
A
The Clock phase may need adjustment. Select  
PC Setting from the SET UP menu, highlight  
Clock phase and adjust until the picture clears.  
Why can only certain digital channels be  
viewed?  
Q
A Favourite list has been selected (see 'Favourite  
A
Programmes' section), set the feature to ALL  
PROGS or change channels by using the number buttons.  
Why when digital subtitles have been selected  
are they not showing on screen?  
Q
Subtitles are not currently being transmitted by the  
A
broadcaster.  
Why are some of the digital subscription  
channels unavailable?  
Q
A
Your subscription needs upgrading. Contact your  
service provider.  
Why is there no digital text service?  
Q
The digital programme being viewed is not  
broadcasting digital text. Try another digital  
A
Why is the soundtrack in English when a  
different audio language has been selected?  
programme.  
Q
A
The programme is currently being broadcast with  
an English soundtrack only.  
Why are there problems with analogue text?  
Q
A
Good performance of text depends on a good  
strong broadcast signal. This normally requires a  
Why is there incorrect or no sound when in  
DTV mode?  
Q
A
roof or loft aerial. If the text is unreadable or garbled,  
check the aerial. Go to the main index page of the text  
service and look for the User Guide. This will explain the  
basic operation of text in some detail. If further  
information is needed on how to use text see the  
text section.  
Press OI/II to check if the hard of hearing option  
has been selected.  
Why is there no sound from my connected  
sound equipment?  
Q
Check the Speaker option in the Sound menu is  
A
set to Off.  
Download from Www.Somanuals.c3om8. All Manuals Search And Download.  
Questions and Answers  
continued  
Why are the colours wrong when an NTSC  
source is played?  
Why are there no analogue text sub-pages?  
Q
A
Q
A
There are none broadcast or they have not yet  
Connect the source via a SCART lead and play.  
Select Manual setting from the SET UP menu.  
loaded. Press the  
(See text section).  
button to access.  
X
Manual setting  
Colour system: Auto.  
Why are the four coloured text numbers visible  
but no text?  
EXT2  
Store  
A
V
C
R
Q
OK  
MENU  
Text has been selected whilst viewing an external  
source i.e. DVD or VCR. No text will appear on  
screen or a box may appear stating no information is  
available. Select a broadcasting channel and press  
EXIT  
Back  
Watch TV  
A
Set the Colour to Auto. and exit.  
1
2
/
/
to access.  
6 7  
Go to the Picture settings menu and adjust  
the tint.  
Why does the GREEN Active Standby LED  
sometimes take longer to go out?  
Q
A
Why is there no sound from a PC connected via  
HDMI?  
Q
A*  
When put into standby the television’s active  
standby will automatically search all available  
channels for downloads, provided Auto upgrade is On.  
AV connection  
W
PC/HDMI1 audio  
HDMI1  
The time it takes to do this may vary.  
HDMI1 audio  
EXT1 output  
EXT2 input  
EXT2 output  
Woofer  
Auto.  
DTV  
AV  
DTV  
Internal  
MENU  
Back  
EXIT  
Watch TV  
Press and hold the OK button for 5 seconds – the Lip  
Sync Latency menu will appear. Select between On  
and Off.  
Lip Sync Latency  
On  
Cleaning the screen and cabinet…  
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or  
solvents on the screen or cabinet as this may cause damage.  
Disposal…  
The following information is only for EU-member states:  
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,  
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about  
recycling of this product, please contact your local city office, your household waste disposal service or the shop where  
you purchased the product.  
Download from Www.Somanuals.c3om9. All Manuals Search And Download.  
Notes  
For your own records  
Download from Www.Somanuals.c4om0. All Manuals Search And Download.  
Information  
Before connecting any external equipment, turn off all main power switches. If there is no switch  
remove the mains plug from the wall socket.  
Connecting a computer  
Signal information for Mini D-sub 15 pin connector  
Pin No.  
Signal name  
Pin No.  
9
Signal name  
NC  
Pin assignment  
for RGB/PC  
terminal  
1
2
3
4
5
6
7
8
R
G
B
10  
Ground  
NC  
11  
NC (not connected)  
NC  
12  
NC  
13  
H-sync  
V-sync  
NC  
Ground  
Ground  
Ground  
14  
15  
Connecting a DVD/STB via HDMI  
Acceptable video signals through HDMI terminals  
H. Active  
720  
V. Active  
576  
I/P  
H. Frequency (kHz)  
31.250  
V. Frequency (Hz)  
50.000  
50.000  
50.000  
59.940  
59.940  
59.940  
59.940  
60.000  
60.000  
60.000  
60.000  
50.000  
59.940  
60.000  
Pixel Frequency (MHz)  
27.000  
Prog  
Prog  
Int  
1280  
1920  
640  
720  
37.500  
74.250  
1080  
480  
28.125  
74.250  
Prog  
Prog  
Prog  
Int  
31.469  
25.175  
720  
480  
31.469  
27.000  
1280  
1920  
640  
720  
44.955  
74.176  
1080  
480  
33.716  
74.176  
Prog  
Prog  
Prog  
Int  
31.500  
25.200  
720  
480  
31.500  
27.027  
1280  
1920  
1920  
1920  
1920  
720  
45.000  
74.250  
1080  
1080  
1080  
1080  
33.750  
74.250  
Prog  
Prog  
Prog  
56.250  
148.500  
148.352  
148.500  
67.433  
67.500  
Int = Interlace; Prog = Progressive  
Download from Www.Somanuals.c4om1. All Manuals Search And Download.  
Specifications and accessories  
Stereo  
Nicam  
DVB-T Broadcast systems/channels  
Broadcast systems/channels  
UK  
UHF 21-68  
PAL-I  
UHF UK21-UK69  
2 carrier system  
France  
VHF 05-10 (VHF 01-05)  
UHF 21-69  
PAL-B/G  
UHF E21-E69  
VHF E2-E12, S1-S41  
Visible Screen Size  
(approx.)  
Model 32  
80cm  
94cm  
107cm  
37  
42  
Germany VHF 05-12  
UHF 21-69  
SECAM-L UHF F21-F69  
VHF F1-F10, B-Q  
Display  
16:9  
Switzerland VHF 05-12  
UHF 21-69  
SECAM-D/K UHF R21-R69  
VHF R1-R12  
Sound output (at 10% distortion) Main 10W + 10W  
Power consumption  
as specified in  
EN60107-1 : 1997  
Model 32  
154W  
190W  
241W  
Italy  
VHF 05-12 (D,E,F,G,H,H1,H2)  
UHF 21-69  
37  
42  
Spain  
UHF 21-69  
Standby (approx.)  
Model 32  
<1W  
<1W  
<1W  
Video Input  
PAL, SECAM, NTSC 3.58/4.43  
37  
42  
External connections  
EXT1  
EXT2  
EXT3  
EXT3  
Input/Output  
21-pin SCART  
RGB, A/V  
Selectable output  
Dimensions  
(approx.)  
Model 32 60cm (H) 80cm (W) 29cm (D)  
37 67cm (H) 92cm (W) 29cm (D  
42 73cm (H) 103cm (W) 34cm (D)  
(Height dimension includes foot stand)  
Input/Output  
Input  
21-pin SCART  
A/V, S-video  
Selectable output  
Phono jacks  
Phono jacks  
Y, PB/CB, PR/CR  
A/V  
Weight (approx.)  
Model 32  
18kg  
37  
42  
22kg  
27.5kg  
Input (Side)  
Phono jack  
Phono jacks  
Video  
Audio L + R  
Headphone socket  
Accessories  
3.5mm stereo  
HDMI 1/2  
PC  
Input  
Input  
HDMI™ (1080p, LIP SYNC)  
Remote control  
2 batteries  
(AAA, IEC R03 1.5V)  
Mini D-sub 15-pin Analog RGB signal  
PC/HDMI1 Audio  
Phono jacks  
Optical  
Audio L + R  
Audio L + R  
Digital Audio Output (S/PDIF)  
Output to Active Super Woofer Phono jack  
Fixed Audio Output Phono jacks  
DVB is a registered trademark of the DVB Project  
Printed on recycled paper. 100% Chlorine free.  
© Toshiba Information Systems (U.K.) Limited  
All rights reserved.  
Reproduction in whole or part without written permission is strictly prohibited.  
Toshiba Information Systems (U.K.) Limited  
Consumer Products Division,  
European Service Centre,  
Admiralty Way, Camberley,  
Surrey, GU15 3DT, UK  
Specification is subject to change without notice.  
Originated by Zushi Illustration & Visualisation, Bristol, UK.  
Download from Www.Somanuals.c4om2. All Manuals Search And Download.  

Tascam Musical Toy Instrument CD GT1MKII User Manual
Toastmaster Convection Oven TC1463 User Manual
Toshiba Cash Register MA 230 User Manual
Toshiba Security Camera NVR16 X User Manual
Triarch Indoor Furnishings 31086 32 User Manual
Uniden Two Way Radio GMR1448 2CK User Manual
Vector Portable Generator SMATE200A User Manual
Viking Home Security System Access Control User Manual
Vinotemp Refrigerator VT200 User Manual
Waring Oven CO900B User Manual