A P R O U D H E R I T A G E O F E X P E R I E N C E & Q U A L I T Y
P o r t a b l e I c e M a k e r
V T - I C E M P 2 5
O W N E R ’ S
M A N U A L
W W W . V I N O T E M P . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING
• Before connecting the appliance to a power supply, let unit stand upright
overnight. This will reduce the possibility of the cooling system
malfunctioning due to improper handling during shipping.
• Clean your unit thoroughly before putting into use.
• Use the parts diagram on page 5 to insure proper positioning of internal
components.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire,
electrical shock or injury when
using your appliance, follow
these basic precautions:
• Do not operate this or any other appliance with a damaged cord.
• Connect to properly polarized outlets only. No other appliance should be
plugged into the same outlet. Be sure that the plug is fully inserted into
the receptacle.
• Do not run cord over carpeting or other heat insulators; do not cover
cord. Keep cord away from traffic areas and do not submerge in water.
• We do not recommend the use of an extension cord, as it may overheat
and become a fire risk. However, if you still elect to use an extension
cord, it is absolutely necessary that it be a UL Listed 3-wire grounding
type appliance extension cord having a 3-prong grounding plug and a 3-
slot receptacle that will plug into the appliance. The marked rating of the
extension cord should be 115 V, 15 A
• Unplug the ice maker before cleaning it or making repairs.
• Exercise caution and use reasonable supervision when appliance is used
near children.
• Do not clean your ice maker with flammable fluids. The fumes can
create a fire hazard or explosion.
• Do not tip over.
• Do not operate with side or back panels removed.
• If the ice maker is brought in from outside in wintertime, give it a few
hours to warm up to room temperature before plugging it in.
• Ice maker is intended for household use.
• For use in a controlled ambient location such that the ambient
temperature does not exceed 90°F (32°C) and is not below 60°F (16°C).
4
W W W . V I N O T E M P . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
PROCEDURES & MAINTENANCE
GETTING STARTED
1. Remove the exterior and interior packaging. Check that ice basket and
ice scoop are included. If any parts are missing, please contact the
vendor.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice
basket and clean it.
3. Find a location for your ice maker that is protected from direct sunlight
and other sources of heat (i.e., stove, furnace, radiator). Place the ice
maker on a level surface. Maker sure that there is at least 5 inches of
space between the back and sides of your ice maker and the wall.
4. Allow the refrigerant to settle overnight before plugging in ice maker.
5. The appliance must be positioned so that the plug is accessible.
Warning: Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, have it replaced by an
authorized products service center.
CONNECTING YOUR ICE MAKER
1. This unit should be properly grounded for your safety. The power cord of
this appliance is equipped with a three-prong plug which mates with
standard three prong wall outlets to minimize the possibility of electric
shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall
outlet. Do not under any circumstances cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician.
3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet
with three-prong ground.
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using your ice maker, it is recommended that you clean it
thoroughly.
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. The outside of the ice maker should be cleaned regularly with a mild
detergent solution and warm water.
4. Dry the interior and exterior with a soft cloth.
5. When the machine is not in use, open the water drain cap to completely
drain the water reservoir.
6
W W W . V I N O T E M P . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR ICE MAKER
1. Select the size of the ice cube by pressing the “HAND” button. If the
room temperature is lower than 60°F, it is best to select the small or
medium ice size, otherwise the ice cubes might stick together.
2. Open the cover, remove the ice basket and pour water into tank.
3. Keep water level below the “Fill Line.”
4. Press “START” on the control panel to begin the ice making cycle.
5. The ice making cycle lasts 7 to 15 minutes, depending on the size of
the ice cubes selected. Larger cubes will take longer to produce.
6. While the ice maker is on, verify the water level periodically. If the
water level is too low, the ice maker will stop automatically, and the
“Add Water” indicator will turn on.
7. Press the “STOP” button, fill the unit with water, and then press the
“START” button.
8. Allow the refrigerant inside the compressor at least 3 minutes to settle
before restarting.
9. The ice maker automatically stops working when the ice basket is full.
10. If you fill the unit with water, but the ice maker still does not function,
empty some water out through the drain, then recap the drain. The
machine should start automatically.
11. Change the water in the water reservoir periodically to ensure
cleanliness and hygiene.
12. It is best to use tap water or bottled drinking water in the ice maker.
Distilled water may not work. If you do use distilled water and the ice
maker will not function, try adding a little salt into the water (a small
amount of salt added to the water should be imperceptible).
13. If the ice does not taste good, or the unit develops a musty odor, try
running a few cycles of the ice maker with a mild white vinegar
solution. Then empty out all the vinegar solution and run a few cycles
with plain water to eliminate all traces of the vinegar.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS WITH YOUR ICE MAKER
You can solve many common problems easily, saving you the cost of a
possible service call. Try the suggestion below to see if you can solve the
problem before contacting Vinotemp at [email protected].
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Low water level.
SOLUTION
PROBLEM
Stop the ice maker, fill it with water, and
then restart it.
Open the drain cap on the back of the unit
and drain out a small amount of water.
Replace the drain cap and attempt to use
the unit again.
The “Add Water”
indicator is on.
There is some air in the lines.
The unit is filled with distilled
water or some other type of
water with no impurities.
Add a little bit of salt to the water or use
water from a different source (tap water or
bottled drinking water is best).
The “Ice Full”
indicator is on.
The ice basket is full.
Remove ice from the ice basket.
The “Water” and
“Ice” indicators
are both flashing.
Check if ice is blocking the ice pusher.
Otherwise, consult service.
The ice pusher cannot move.
Stop the ice maker, and restart it when the
ice blocks melt. Select the small ice button.
The ice cycle is too long.
The ice cubes stick
together.
Change the water in the inner tank. The
ideal water temperature is 45°-90°F.
The water temperature in the
inner tank is too low.
The unit is being run off the
wrong voltage or frequency.
Plug the unit into a 110/120 Volt, 60 Hertz
power source.
The compressor
makes a loud
buzzing noise.
The compressor was damaged
in shipping.
Contact the shipper/manufacturer.
The unit does
nothing.
Power is not supplied to the
unit.
Plug the unit into a 110/120 Volt, 60 Hertz
power source.
The ambient temperature or
the water temperature is too
high.
Please run the ice maker in temperatures
below 90°F and/or pour colder water into
tank.
The ice making
cycle seems
normal, but no ice
is produced.
Refrigerant leakage.
Consult a qualified technician.
Consult a qualified technician.
A pipe in the cooling system is
blocked.
8
W W W . V I N O T E M P . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Model No.
VT-ICEMP25
Ice Making Capacity
Ice Storage Capacity
Power
26 lbs / day
1.8 lbs
110V~120V/60Hz
3.5 A
Rated Current
Power Input
150W
Refrigerant
R134a/3 oz
12" x 15" x 15"
Size (W x D x H)
CIRCUIT DIAGRAM
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS OF SALE AND WARRANTY
Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”)
hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the
Purchaser whether freight prepaid or freight collect. Seller assumes no responsibility for the goods sold to the
Purchaser once the goods have left the Seller’s premises, including, but not limited to, late delivery by the
moving carrier, or for events caused by any difficulty carrier incurs in attempting to fit the goods into the
Purchaser’s place of business or residence due to the size of the goods or otherwise. Purchaser assumes all
responsibility for delivery, payment of freight, access, measurement, installation, hook-up, wiring, moving and
storage of the goods. The transportation of all goods is subject to the terms and conditions which the moving
carrier imposes on Purchaser including, but not limited to, additional charges imposed per flight of stairs, and/or
additional charges resulting from the carrier’s inability to safely and/or adequately use the building elevator to lift
the goods to an upper floor. Any claim for damages incurred during shipment by the carrier of the goods are
insured and handled directly with the carrier. Any damages due to manufacture defects will be handled directly
with Vinotemp International, subject to the limited warranty.
All sales are final, and unless authorized in writing by the Seller, Purchaser may not return the goods, under any
circumstance. If Purchaser refuses to accept the goods, under any circumstance, the Purchaser is liable for the
return and cost of freight both ways, and if Seller does take back the goods, there will be a restocking charge
that is 35% of the purchase price of the goods. Purchaser must notify Seller of non-conforming goods within four
days of delivery, after which time all goods are deemed accepted.
If Purchaser tenders payment with a check that has insufficient funds (NSF), or stops payment on a check or
credit card for any reason, Purchaser agrees to pay for all costs associated with the Seller’s connection or
litigation of such a claim, including without limitation extra damages, court costs and attorneys’ fees. Finance
charges begin the date of invoice. Collection fees plus NSF fee of $50 will be added to your invoice, which you
agree to promptly pay. Title to the goods does not pass until payment is received in full by Seller and Seller
retains a security interest in the goods until they are paid for in full.
LIMITED WARRANTY: Seller warrants that the goods will be free of defects in materials and workmanship as
follows: Metal cabinets and similar compressor-based systems including wine, beverage, refrigerator and freezer
units: parts and labor for cooling system and cabinetry for a period of 12 (twelve) months from date of sale,
removal and re-installation of unit is not included in warranty. For a scratch and dent or refurbished unit,
warranty is 3 months from your dated invoice (parts for function only, not cosmetic). There is no warranty on
parts purchased separately. Purchaser’s exclusive remedy is limited, at Seller’s option; to repair or replace
defective part[s] with either new or factory reconditioned part[s]. Purchaser is responsible for shipping the unit
pre-paid to designated facility and Seller will pay return shipping charges in the continental United States for
items repaired under warranty within 12 months from date of sale. Improper placement of the unit will void the
warranty. This limited warranty does not cover damage due to such things as accident, misuse, abuse,
mishandling, neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot or labor trouble,
strikes, lockouts, delay of carrier, unauthorized repair, or any other cause beyond the control of the Seller,
whether similar or dissimilar to the foregoing. Seller is not responsible for any damages caused to Seller’s
property resulting from the good. This limited warranty applies only inside the Continental US. (Alaska, Puerto
Rico and Hawaii are not warranted).
Purchaser understands and acknowledges that the goods sold here are wine cellars and/or other similar units
which house wine. Purchaser assumes all risk of using these units, including risk of spoilage, humidity variations,
temperature variations, leaks, fire, water damage, mold, mildew, dryness and similar and any other perils that
might occur.
Seller is not responsible for incidental or consequential damages, and there are no warranties, expressed or
implied, which extend beyond the Limited Warranty described above. The implied warranties of merchantability
and of fitness for a particular purpose are hereby expressly disclaimed. Some states do not allow the exclusion of
incidental or consequential damages, or a waiver of the implied warranties of fitness and/or merchantability, so
the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions
or to the goods sold generally, Purchaser must first file a written claim with Seller within ten days of the
occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal
action. The sale and all terms are subject to California law. Any legal proceeding arising out of or relating to
these terms and conditions or to the goods sold generally shall be brought solely and exclusively in the County of
Los Angeles. In no event may Purchaser initiate any legal proceeding more than six months after the occurrence
of the event giving rise to the dispute.
The above terms and conditions are the only ones governing this transaction and Seller makes no oral
representations of any kind. These Terms and Conditions can only be modified in writing, signed by both
Purchaser and Seller. 07/08
10
W W W . V I N O T E M P . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE & IMPORTANT NOTICE
Upon receipt and inspection of unit, the supply cord must be replaced if it is
damaged. Contact our customer service at 1-800-777-8466 or
The manufacturer has a policy of continuous improvement on its products
and reserves the right to change materials and specifications without notice.
WARNING:
Please do not place the unit within reach of children.
For adult use only.
17631 S. Susana Road
Rancho Dominguez, CA 90221
Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to
change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability
for errors, omissions, or future changes.
© 2008 Vinotemp International. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|