Toshiba DVD Player SD 3900 User Manual

DVD PLAYER

OWNER’S MANUAL

MODEL : SD-3900

Before connecting, operating or adjusting this product,

please read this instruction booklet carefully and completely.

1-2

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

15. Attachments

Only use attachments/accessories specified by the manufacturer.

16. Accessories

Use only with the cart, stand, tripod, bracket, or

This set has been designed and manufactured to assure personal safety.

Improper use can result in electric shock or fire hazard. The safeguards

incorporated in this unit will protect you if you observe the following proce-

dures for installation, use, and servicing.

This unit does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE

EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

table specified by the manufacturer or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

PORTABLE CART

WARNING

17. Disc Tray

Keep your fingers well clear of the disc tray as it is closing. It can

cause personal injury.

18. Burden

Do not place a heavy object on or step on the product. The object

may fall, causing serious personal injury and serious damage to the

product.

1. Read These Instructions

All safety and operating instructions should be read before the

product is operated.

19. Connecting

2. Follow All Instructions

All operating and use instructions should be followed.

3. Keep These Instructions

The safety and operating instructions should be retained for future

reference.

4. Heed All Warnings

When you connect the product to other equipment, turn off the

power and unplug all of the equipment from the wall outlet. Failure

to do so may cause an electric shock and serious personal injury.

Read the owner’s manual of the other equipment carefully and fol-

low the instructions when making any connections.

20. Sound Volume

All warnings on the product and in the operating instructions should

be adhered to.

5. Power Sources

Reduce the volume to the minimum level before you turn on the

product. Otherwise, sudden high volume sound may cause hearing

or speaker damage.

This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power supply in your home, consult your product dealer or

local power company. For products intended to operate from bat-

tery power, or other sources, refer to the operating instructions.

6. Grounding or Polarization

21. Sound Distortion

Do not allow the product to output distorted sound for a longtime. It

may cause speaker overheating and fire.

22. Earphone

When you use the earphone, keep the volume at a moderate level.

If you use the earphone continuously with high volume sound, it

may cause hearing damage.

Do not defeat the safety purpose of the polarized plug has two

blades with one wider than the other. A grounding-type plug has

two blades and a third grounding prong. The wide blade or the

prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obso-

lete outlet.

23. Laser Beam

Do not look into the opening of the disc tray or ventilation opening

of the product to see the source of the laser beam. It may cause

sight damage.

24. Disc

7. Ventilation

Do not use a cracked, deformed, or repaired disc. These discs are

easily broken and may cause serious personal injury and product

malfunction.

Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from over-

heating. These openings must not be blocked or covered. The open-

ings should never be blocked by placing the product on a bed, sofa,

rug or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventila-

tion is provided or the manufacturer’s instructions have been adhered

to.

25. Damage Requiring Service

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normal, or has been

dropped.

8. Heat

Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce

heat.

26. Servicing

Do not attempt to service this product yourself as opening or

removing the cover may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

27. Replacement parts

When replacement parts are required, be sure the service techni-

cian has used replacement parts specified by the manufacturer or

have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

28. Safety Check

9. Water and Moisture

Do not use this apparatus near water. For example: near a bath

tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or

near a swimming pool.

10. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Clean only with dry cloth.

11. Power-Cord Protection

Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the

product is in proper operating condition.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit

from the apparatus.

12. Overloading

Do not overload wall outlets, extension cords, or integral conve-

nience receptacles, this can result in a risk of fire or electric shock.

13. Lightning

Unplug this apparatus apparatus during lightning storms or when

unused for long periods of time. This will prevent damage to the

product due to lightning and power-line surges.

14. Object and Liquid Entry

Never push objects of any kind into this product through openings

as they may touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of any kind

on the product.

1-4

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Operation with Audio CD and MP3/WMA Disc . . 19

Playing an Audio CD and MP3/WMA Disc . . . . . 19

Notes on MP3/WMA Recordings . . . . . . . . . . . . 19

z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Moving to another Track . . . . . . . . . . . . . . . 20

z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 20

z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Selecting the sound enhancement . . . . . . . 20

z Changing the Audio Channel . . . . . . . . . . . . 20

Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 21

Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 21

z Moving to another File . . . . . . . . . . . . . . . . . 21

z Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 21

z To flip the picture . . . . . . . . . . . . . . . . . . . . . 21

z To rotate picture. . . . . . . . . . . . . . . . . . . . . . 21

z Notes on JPEG Recordings . . . . . . . . . . . . . 21

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 22

Programmed Playback with Audio CD and

MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 22

Programmed Playback with Video CD . . . . . . . . 22

z Repeat Programmed Tracks . . . . . . . . . . . . 22

z Erasing a Track from Program List. . . . . . . . 22

z Erasing the Complete Program List . . . . . . . 22

Additional Information . . . . . . . . . . . . . . . . . . . . . 23

Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Dimmer Function . . . . . . . . . . . . . . . . . . . . . . . . 23

Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 23

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel and Display Window . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to Optional Equipment . . . . . . . . . . . 11

Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-15

General Explanation. . . . . . . . . . . . . . . . . . . . . . 12

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15

z Initial Settings General Operation. . . . . . . . . 13

z Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13

z Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

z Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

z Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

z Parental Control. . . . . . . . . . . . . . . . . . . . . . 15

Operation

Reference

Operation with DVD and Video CD . . . . . . . . . 16-18

Playing a DVD and Video CD. . . . . . . . . . . . . . . 16

General Features. . . . . . . . . . . . . . . . . . . . . . . . 16

z Moving to another TITLE . . . . . . . . . . . . . . . 16

z Moving to another CHAPTER/TRACK . . . . . 16

z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

z Still Picture and Frame-by-Frame Playback . 16

z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17

z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

z Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 17

z Time Search . . . . . . . . . . . . . . . . . . . . . . . . 17

z Selecting the sound enhancement . . . . . . . . 17

z Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

z Marker Search. . . . . . . . . . . . . . . . . . . . . . . 18

Special DVD Features . . . . . . . . . . . . . . . . . . . . 18

z Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18

z Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18

z Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 18

z Changing the Audio Language. . . . . . . . . . . 18

z Changing the Audio Channel . . . . . . . . . . . . 18

z Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 25

Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Others

LIMITED WARRANTY DVD VIDEO PLAYER. . . 28-29

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

1-5

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD only)

Playable Discs

The main film content or accompanying feature content

or additional feature content, or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Audio CD

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number,

enabling you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

(8 cm / 12 cm disc)

In addition, this unit can play a DVD-R, and CD-R or

CD-RW that contains audio titles, MP3, WMA or JPEG

files.

Track (Video CD and audio CD only)

Notes

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW

discs cannot be played on the unit.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

–

Do not use irregularly shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

–

Because of problems and errors that can occur during

the creation of DVD software and/or the manufacture

of DVD discs, Toshiba America Consumer Products,

Inc., Toshiba Hawaii, Inc. and Toshiba of Canada, Ltd.

cannot guarantee that this player will play every fea-

ture of every DVD bearing the DVD logo. As one of the

creators of DVD technology, Toshiba DVD players are

manufactured to the highest standards of quality and,

as a result, such incompatibilities are very rare. If you

happen to experience and difficulty playing a DVD on a

Toshiba DVD player, please feel free to call our

Contact listed in “How to Obtain Warranty Services” on

page 28.

A scene is composed of one or several tracks.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

Notes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs

may be intentionally fixed by software manufacturers.

As this unit plays DVDs and Video CDs according to

disc content designed by the software manufacturer,

some playback features of the unit may not be available

or other functions may be added.

Refer also to the instructions supplied with the DVDs

and Video CDs. Some DVDs made for business pur-

poses may not be played on the unit.

Regional code of the DVD player and DVDs

This DVD player is designed and manufactured

for playback of region “1” encoded DVD soft-

ware. The region code on the labels of some DVD discs

indicates which type of player can play those discs. This

unit can play only DVD discs labeled “1” or “ALL”. If you

try to play any other discs, the message “Check Regional

Code” will appear on the TV screen. Some DVD discs

may not have a region code label even though their play-

back is prohibited by area limits.

1-6

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Storing discs

After playing, store the disc in its case.

Handling the unit

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packed at the factory.

Cleaning discs

When setting up the unit

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

To keep the exterior surfaces clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

Cleaning the unit

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

About Symbols

About the

symbol display

To obtain a clear picture

The DVD player is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

“

” may appear on the TV screen during operation.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is

applicable only to the disc represented by the symbol.

For details, please contact your nearest dealer.

DVD DVD

VCD2.0

Notes on Discs

Video CDs with the PBC (playback control)

function.

Handling discs

VCD1.1

Video CDs without the PBC (playback control)

function.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

Audio CDs.

MP3 MP3 disc.

WMA WMA disc.

JPEG JPEG disc.

Do not stick paper or tape on the disc.

1-7

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel and Display Window

PLAY (

)

Starts playback.

STOP (

)

Stops playback.

PAUSE (

)

Pause playback temporarily/ press repeatedly

for frame-by-frame playback.

Power indicator

Lights green when the

Forward SKIP (

)

DVD player is turned on.

Go to NEXT chapter/track.

Press and hold for two seconds for

a fast forward search.

ON/STANDBY ( /

Switches the player ON

and OFF.

)

Reverse SKIP (

)

Go to the beginning of the current chapter/

track or to PREVIOUS chapter/track.

Press and hold for two seconds for a fast

reverse search.

Disc Tray

Insert a disc here.

OPEN/CLOSE (

)

Opens or closes the disc tray.

Display window

Shows the current status of the player.

Remote Sensor

Point the DVD Player remote control here.

TITLE Indicates current title number

CHP/TRK Indicates current chapter or track number

ANGLE active

DVD

DVD inserted

Indicates total playing time/elapsed time

CD Audio CD inserted

VCD Video CD inserted

PROG. Programmed playback active

MP3 MP3 or WMA disc

inserted

RANDOM RANDOM playback

active

Indicates current player

function:

Playback, Pause, etc.

Indicates repeat

mode

MP3 VCD

CD DVD

TITLE

CHP/TRK

PROG.

RANDOM ALL

1-8

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

SETUP

ON/STANDBY

Accesses or removes setup menu.

Switches DVD Player ON and OFF.

OPEN/CLOSE

E.A.M.

Opens and closes the disc tray.

Selects sound mode during disc

playback.

0-9 number buttons

Selects numbered items in a menu.

PROGRAM

Enters to the program edit mode or

exits from that.

FL DIM

Controls the Display Window’s light.

CLEAR

TOP MENU •

Displays the discs Title menu, if

available.

Removes a track number on the

program list or a mark on the

MARKER SEARCH menu.

MENU •

Accesses menu on a DVD disc.

MARKER

Marks any point during playback.

RETURN •

- Removes the setup menu.

- Displays the menu of a video CD

with PBC.

DISPLAY

Accesses On-Screen display.

• ANGLE

Selects a DVD camera angle if

available

ZOOM •

Enlarges video image.

• SUBTITLE

Selects a subtitle language.

PLAY (

Starts playback.

) •

• AUDIO

REV (Reverse) (

) •

Selects an audio language (DVD) or

an audio channel (CD).

Search backward.

FWD (Forward) (

) •

• RANDOM

Plays tracks in random order.

Search forward.

Reverse SLOW (

Reverse slow playback.

) •

• PAUSE/STEP (

)

Pauses playback temporarily/ press

repeatedly for frame-by-frame

playback.

Forward SLOW (

Forward slow playback.

) •

• SEARCH

Displays MARKER SEARCH menu.

STOP ( ) •

Stops playback.

• A-B RPT

Repeat sequence.

Forward SKIP (

Advances to next chapter or track.

) •

• REPEAT

Repeat chapter, track, title, all.

Reverse SKIP ( ) •

Returns to beginning of current

chapter or track or go to previous

chapter or track.

• ENTER

Confirms menu selection.

•

(left/right/up/down)

Selects an item in the menu.

Remote control battery installation

Remote Control Operation Range

Detach the battery cover on the rear of

the remote control, and insert two R03

Point the remote control at the remote sensor and

press the buttons.

^zDistance: About 23 ft (7 m) from the front of the

remote sensor.

^zAngle: About 30° in each direction of the front of the

remote sensor.

AAA

(size AAA) batteries with

aligned correctly.

and

A A A

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

1-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

AUDIO OUT (Left/Right)

Connect to an amplifier, receiver, or stereo system.

VIDEO OUT

Connect to a TV with video inputs.

AC Power Cord

Plug into the power source.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)

Connect to a TV with Y Pb Pr inputs.

S-VIDEO OUT

Connect to a TV with S-Video inputs.

OPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

1-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Progressive Scan (ColorStream Pro) connection

Tips

^zIf your television is a high-definition or “digital ready”

television, you may take advantage of the DVD

Player’s progressive scan output for the highest

video resolution possible.

^zIf your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

Progressive Scan on the DVD Player.

^zDepending on your TV and other equipment you wish

to connect, there are various ways you could connect

the player. Use only one of the connections

described below.

^zPlease refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the

best connections.

^zFor better sound reproduction, connect the player’s

AUDIO OUT jacks to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment.

See “Connecting to Optional Equipment” on page 11.

Connect the COMPONENT VIDEO OUT/

PROGRESSIVE SCAN jacks on the DVD Player to

the corresponding in jacks on the TV using the

Y Pb Pr cable (C).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD Player to the audio left/right in jacks on the}

TV (A) using the audio cables.

Caution

–

Make sure the DVD Player is connected directly to the

TV. Tune the TV to the correct video input channel.

– Do not connect the DVD Player’s AUDIO OUT jack to

the phono in jack (record deck) of your audio system.

– Do not connect your DVD Player via your VCR. The

DVD image could be distorted by the copy protection

system.

Notes

– Set the Progressive to “On” on the setup menu for

progressive signal, see page 13.

– Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack) or S-VIDEO

connection.

Connecting to a TV

^zMake one of the following connections, depending on

the capabilities of your existing equipment.

Rear of TV

S-VIDEO

INPUT

VIDEO

INPUT

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

AUDIO INPUT

Video connection (Good)

Connect the VIDEO OUT jack on the DVD Player to

the video in jack on the TV using the video cable (V).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD Player to the audio left/right in jacks on the}

TV (A) using the audio cables.

S-Video connection (Better)

Connect the S-VIDEO OUT jack on the DVD Player

to the S-Video in jack on the TV using the S-Video

cable (S).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD Player to the audio left/right in jacks on the}

TV (A) using the audio cables.

Component Video (ColorStream ) connection (Best)

Connect the COMPONENT VIDEO OUT/

PROGRESSIVE SCAN jacks on the DVD Player to

the corresponding in jacks on the TV using the

Y Pb Pr cable (C).

Rear of

DVD player

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD Player to the audio left/right in jacks on the}

TV (A) using the audio cables.

Note

If the TV has an S-video input, connect the DVD player

with the S-video cable. When using an S-video cable,

do not connect the yellow video cable.

1-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Connecting to Optional Equipment

Rear of DVD player

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic ll/

Pro Logic

Connect the Left and Right AUDIO OUT jacks on the

DVD Player to the audio left and right in jacks on your

amplifier, receiver, or stereo system, using the audio

cables (A).

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital™, MPEG 2, or DTS)

Connect one of the DVD Player’s DIGITAL AUDIO

OUT jacks (OPTICAL O or COAXIAL X) to the cor-

responding in jack on your amplifier. Use an option-

al digital (optical O or coaxial X) audio cable.

OPTICAL

COAXIAL

DIGITAL INPUT

AUDIO INPUT

You will need to activate the player’s digital output.

Amplifier (Receiver)

2 _{(See “Digital Audio Output” on page 14).}

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD Player (MPEG 2,

Dolby Digital™ and DTS). Check the receiver manual

and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

– Repeated pressing of the AUDIO button may allow

you to select between various audio formats available

on the disc.

Note

This player does not perform internal (2 channel)

decoding of a DTS sound track. To enjoy DTS

multi channel surround, you must connect this player to

a DTS compatible receiver via one of this player’s

digital audio outputs.

1-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation

Temporary Feedback Field Icons

General Explanation

This manual gives basic instructions for operating the

DVD Player. Some DVDs require specific operation or

allow only limited operation during playback. When this

TITLE

Repeat Title

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs only)

occurs, the symbol

appears on the TV screen, indi-

ALL

Repeat All Tracks (non-PBC Video CDs only)

cating that the operation is not permitted by the DVD

Player or is not available on the disc.

Repeat A-B

OFF

Repeat Off

On-Screen Display

General playback status can be displayed on the TV

Resume play from this point

Action prohibited or not available

screen. Some items can be changed on the menu.

On-screen display operation

Notes

z Some discs may not provide all of the features on the

on-screen display example shown below.

z If no button is pressed for 10 seconds, the on-screen

display disappears.

Press DISPLAY during playback.

Press

to select an item.

2 _{The selected item will be highlighted.}

Press

to change the setting of an item.

3 _{The number buttons can be also be used for setting}

numbers (e.g., title number). For some functions,

press ENTER to execute the setting.

DVD

Items

Function (Press

to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

, or

1 /3

1 /12

titles, and skips to the desired title number.

Numbers, ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numbers, ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

0:20:09

Numbers, ENTER

Audio language

and Digital Audio

Output mode

1 ENG

5.1 CH

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

, or

AUDIO

Subtitle language

Shows the current subtitles language, and

, or

OFF

1 /1

changes the setting.

SUBTITLE

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

, or

ANGLE

Sound

Shows the current sound mode, and

changes the setting.

, or

NORM.

E.A.M.

VCD1.1

VCD2.0

Items

Function (Press

to select desired item)

Selection Method

Track Number

Shows the current track number, total number of tracks

and PBC On mode, and skip to the desired track number.

, or

1 /4

Numbers, ENTER

Time

Shows the elapsed playing time (Display only)

0:20:09

–

Audio Channel

Shows the audio channel, and

changes the audio channel.

, or

STER.

AUDIO

Sound

Shows the current sound mode, and

changes the setting.

, or

NORM.

E.A.M.

1-13

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Initial Settings

Picture

You can set your own Personal Preferences on the

player.

TV Aspect DVD

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a conventional TV set is

connected. The video material formatted in the Pan &

Scan style is played back in that style (Both sides of the

picture are cut off).

Initial Settings General Operation

Press SETUP.

The setup menu appears.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

16:9 Wide: Select when a 16:9 wide TV is connected.

French

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Spanish

Italian

Rating

Area Code

TV Aspect

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Area Code

Hungarian

Other — — — —

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Press

to select the desired item.

2 _{The screen will show the current setting for the}

selected item, as well as alternate setting(s).

Progressive Scan DVD

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the COMPONENT VIDEO OUT/

PROGRESSIVE SCAN jacks, but are connecting the

DVD Player to a standard (analog) television, set

Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

While the desired item is selected, press , then

to select the desired setting.

Press ENTER to confirm your selection.

4 _{Some items require additional steps.}

Press SETUP, RETURN, or PLAY to exit the

5 _{setup menu.}

Language

Disc Language DVD

Off

Disc Audio

Disc Subtitle

Disc Menu

Rating

Select a language for the disc’s Menu, Audio, and Subtitle.

Original : The original language set for the disc is selected.

Other : To select another language, press number buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 25. If you enter the wrong language

code, press CLEAR.

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Original

English

Disc Audio

Disc Subtitle

Disc Menu

French

German

Spanish

Italian

Rating

Area Code

Caution

TV Aspect

Once the setting for progressive scan output is entered,

an image will only be visible on a progressive scan

compatible TV or monitor. If you set Progressive Scan

to On in error, you must reset the unit. Press STOP to

stop any disc that is playing. Next, press STOP again

and hold it for five seconds before releasing it. The

video output will be restored to the standard setting,

and a picture will once again be visible on a convention-

al analog TV or monitor.

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Hungarian

Other — — — —

Menu Language

Select a language for the setup menu. This is the menu

you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

1-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Sound

Others

Digital Audio Output

The DRC, Vocal, PBC and Auto Play settings can be

changed.

Each DVD disc has a variety of audio output options.

Set the player’s Digital Audio Output according to the

type of audio system you use.

z Press

to select the desired item and press

ENTER. The setting of the selected item is changed

between On and Off.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”

if you connected the DVD Player’s DIGITAL OUT jack to

a Dolby Digital decoder (or an amplifier or other equip-

ment with a Dolby Digital decoder).

Disc Audio

Disc Subtitle

Disc Menu

Rating

DRC

Off

Vocal

PBC

Auto Play

Area Code

TV Aspect

Stream/PCM: Select “Stream/PCM” if you connected

the DVD Player’s DIGITAL OUT jack to an amplifier or

other equipment with a DTS decoder, Dolby Digital

decoder or MPEG decoder.

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

PCM: Select when connected to a 2-channel digital

stereo amplifier. The DVD player outputs sounds in the

PCM 2ch format when you play a DVD video disc

recorded on the Dolby Digital, MPEG1, or MPEG2

recording system.

Dynamic Range Control (DRC) DVD

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

DOLBY

Disc Audio

Disc Subtitle

Disc Menu

Rating

_DIGITAL/PCM

Stream/PCM

PCM

Area Code

Sample Freq.

48 KHz

TV Aspect

Menu Language

96KHz

Vocal DVD

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Sample Frequency

VCD2.0

VCD1.1

PBC

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

Auto Play DVD

You can set up the DVD Player so a DVD disc automat-

ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will

search a title where playback time is longest and then

play back the title automatically.

On: Auto Play function is activated.

Off: Auto Play function is not activated.

Note

The Auto Play function may not work for some DVDs.

1-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Parental Control

DVD

Area Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Area Code List”, page 26.).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country-dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Disc Audio

Code Set

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Disc Audio

Disc Subtitle

Disc Menu

Select Area Code using the

setup menu.

buttons on the

Rating

Area Code

TV Aspect

While Area Code is selected, press

Follow step 3 of “Rating” on left.

Select the first character using the

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Unlock

Change

buttons.

Select “Rating” on the Setup menu using the

buttons.

Shift the cursor using button and select the

5 _{second character using}

buttons.

While “Rating” is selected, press

Press ENTER to confirm your area code selec-

6 _{tion, then press SETUP to exit the menu.}

When you have not entered a password yet.

3 _{Enter a 4-digit password using the numbered but-}

tons to create a personal 4-digit security password.

then press ENTER. Enter the 4-digit password

again and press ENTER to verify.

Note

Confirmation of the 4-digit password is necessary when

the code is changed (see “Changing the 4-digit code”

below.).

When you have already entered a password;

Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass-

word, then press ENTER.

Changing the 4-digit code

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old code, then press ENTER.

If you make a mistake before pressing ENTER, press

CLEAR and enter 4-digit security password again.

3 Select Change using

buttons then press

ENTER.

Select a rating from 1 to 8 using the

but-

4 Enter the new 4-digit code, then press ENTER.

5 Enter exactly the same code a second time and veri-

fy by pressing ENTER.

4 _tons.

Level 1: DVD software for adults cannot be

played back.

6 Press SETUP to exit the menu.

Level 8: All DVD software can be played back.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

If you forget your 4-digit code

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the play-

er, all disc scenes with the same rating or lower will

be played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

If you forget your password, to clear the current pass-

word, follow the procedure below.

1 Press SETUP to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

The 4-digit password is cleared. “P CLr” appears on the

display for a moment.

Enter a new code as shown above to the left (Rating).

Press ENTER to confirm your rating selection,

5 _{then press SETUP to exit the menu.}

1-16

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Playing a DVD and Video CD

General Features

VCD2.0

VCD1.1

Playback Setup DVD

Note

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

z Turn on the TV and select the video input source con-

nected to the DVD player.

z Audio system: Turn on the audio system and select

the input source connected to the DVD player.

Moving to another TITLE DVD

Press OPEN/CLOSE to open the disc tray.

1 /3

When a disc has more than one title, you can move to

another title as follows:

^zPress DISPLAY, then press the appropriate num-

bered button (0-9) to select a title number.

Load your chosen disc in the tray, with the

2 _{playback side down.}

Press OPEN/CLOSE to close the tray.

3 _{READING appears on the TV screen, and playback}

starts automatically. If playback does not start,

press PLAY.

Moving to another CHAPTER/TRACK

In some cases, the disc menu might appear

instead.

1 /12

VCD1.1

VCD2.0

DVD

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which offer a menu.

z Press SKIP

briefly during

playback to select the next chapter/track or to return

to the beginning of the current chapter/track.

DVD

Use the

buttons to select the title/chapter you

^zPress SKIP

twice in quick successions to step

want to view, then press ENTER to start playback.

Press TOP MENU or MENU to return to the menu

screen.

back to the previous chapter/track.

^zTo go directly to any chapter during DVD playback,

press DISPLAY. Then, press

to select the

chapter/track icon. Then, enter the chapter/track

number using the numbered buttons (0-9).

VCD2.0

^zUse the number buttons to select the track you want

to view.

Note

Press RETURN to return to the menu screen.

^zMenu setting and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page

14.

For two-digit numbers, press the numbered buttons

(0-9) in rapid succession.

VCD2.0

VCD1.1

Search DVD

1 Press REV

or FWD

during playback.

The player will now go into SEARCH mode.

2 Press REV

required speed:

(backward) or

(forward).

or FWD

X2,

repeatedly to select the

X4, X16, X100

Notes

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 15).

With a Video CD, the Search speed changes:

X2,

X8,

X4,

X8, (backward) or

X2,

X4,

– DVDs may have a region code.

(forward).

3 To exit SEARCH mode, press PLAY.

Your player will not play discs that have a region code

different from your player. The region code for this

player is 1 (one).

Still Picture and Frame-by-frame playback

VCD2.0

VCD1.1

DVD

1 Press PAUSE/STEP during playback.

The player will now go into PAUSE mode.

2 You can advance the picture frame-by-frame by

pressing PAUSE/STEP repeatedly on the remote con-

trol.

1-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

VCD2.0

VCD1.1

Repeat A-B DVD

OFF

VCD2.0

VCD1.1

Slow Motion DVD

1 Press SLOW

The player will enter SLOW mode.

2 Use the SLOW or to select the required speed:

1/4 or

during playback.

To repeat a sequence in a title:

1 Press A-B RPT at your desired starting point.

“ A * ” appears briefly on the TV screen.

1/16,

1/8,

1/2 (backward), or

1/2 (forward).

2 Press A-B RPT again at your desired end point.

“A B” appears briefly on the TV screen, and the repeat

3 To exit slow motion mode, press PLAY.

sequence begins (“A

sB” appears the display window).

3 To cancel the sequence, press A-B RPT.

Note

Slow motion playback in reverse is not applicable for

Video CD.

0:20:09

-:--:--

Time Search DVD

The Time Search function allows you to start playing at

any desired time on the disc.

VCD2.0

VCD1.1

Random Karaoke DVD

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the display window.

1 Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 To return to normal playback, press RANDOM until

“RANDOM” disappears on the display window.

2 Within 10 seconds, press

to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

Tip

By pressing SKIP

during Random playback, the

3 Within 10 seconds, use the number buttons to enter

unit selects another title (track) and resumes Random

the required start time. Enter hours, minutes, and sec-

playback.

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

Note

4 Within 10 seconds, press ENTER to confirm the start

time.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

z This function only works with DVD Karaoke discs and

video CD without PBC.

z On a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Random function. See

page 14.

Selecting the sound enhancement

VCD2.0

VCD1.1

Repeat DVD

NORM.

3D SUR

DIALOGUE

VCD2.0

VCD1.1

DVD

TITLE

TRACK

CHAPT

ALL

OFF

Press E.A.M. to select the sound enhancement during

playback.

DVD Video Discs - Repeat Chapter/Title/Off

NORM. : Normal sound

To repeat the currently playing chapter, press REPEAT.

The Repeat Chapter icon appears on the TV screen.

3D SUR: This player can produce a 3D Surround effect, which

simulates multi-channel audio playback from two conventional

stereo speakers, instead of the five or more speakers normally

required to listen to multi-channel audio from a home theater

system.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

Video CDs - Repeat Track/All/Off

DIALOGUE: Enhances critical center channel information to

make dialogue more intelligible (only when playing a DVD

video disc recorded on the Dolby Digital recording system).

• To use this enhancement on audio output from the

DIGITAL AUDIO OUT jack, be sure to set “Digital Audio

Output” to “PCM”. See page 14.

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat All icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Repeat function. See page 14.

1-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

Special DVD Features

DVD

VCD2.0

VCD1.1

Zoom

DVD

Checking the contents of DVD Video

discs: Menus

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVDs may offer menus that allow you to access special

features. To use the disc menu, press MENU. Then,

press the appropriate number button to select an option.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

Or, use the

then press ENTER.

buttons to highlight your selection,

2 Use the

buttons to move through the zoomed

picture.

DVD

Title Menu

3 Press CLEAR to resume normal playback or return to

the paused image.

1 Press TOP MENU.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

Note

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

z The zoom function may not work for some DVDs.

3 To remove the title menu, press TOP MENU again.

VCD2.0

VCD1.1

DVD

Marker Search

MARKER SEARCH

1/9

DVD

Disc Menu

1 Press MENU.

The disc menu is displayed.

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

2 To remove the disc menu, press MENU again.

1 During disc playback, press MARKER when

playback reaches the spot that you want to

memorize.

1 /1

DVD

Camera Angle

The Marker icon will appear on the TV screen briefly.

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

^zPress ANGLE repeatedly during playback to select a

desired angle.

To Recall a Marked Scene

The number of the current angle appears on the display.

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

Changing the Audio Language

2 Within 10 seconds, press

to select a Marker

1 ENG

5.1 CH

number that you want to recall.

DVD

3 Press ENTER.

Press AUDIO repeatedly during playback to hear a dif-

ferent audio language or audio track.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

Changing the Audio Channel

To clear a Marked Scene

STER.

LEFT

RIGHT

VCD2.0

VCD1.1

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STER., LEFT or RIGHT).

2 Press

to select the Marker number that you

want to erase.

3 Press CLEAR.

1 ENG

DVD

Subtitles

The Marker number will be erased from the list.

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.

Note

appears, the feature is not available on the disc.

1-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc

Notes on MP3/WMA Recordings

Playing an Audio CD and MP3/WMA Disc

About MP3

MP3

WMA

^zAn MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^zThe player can not read an MP3 file that has a file

extension other than “.mp3”.

The DVD Player can play MP3/WMA formatted record-

ings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3/WMA recordings, read the notes on

MP3/WMA Recordings on right.

Insert a disc and close the tray.

Audio CD; Audio CD menu appears on the TV

screen go to step 3.

MP3/WMA disc; The MP3/WMA-JPEG choice

menu appears on the TV screen. Go to step 2

About WMA(Window Media Audio)

^zAn WMA file is a Microsoft audio compression

technology.

^zWMA(Windows Media Audio) offers double the audio

compression of the MP3 format.

MP3 WMA

JPEG

MP3/WMA Disc compatibility with this player is

limited as follows:

1. Sampling Frequency / only at 44.1kHz (MP3),

22.05 - 44.1kHz (WMA)

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

Press

2 _ENTER.

to select the MP3/WMA then press

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy

CD Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

Program

MP3 WMA

TRACK 1.mp3

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Clear All

OFF

00:00

Press

to select a folder, and ENTER.

3 _{A list of files in the folder appears.}

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

Press

to select a track then press PLAY or

4 _ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 or WMA files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Program

MP3 WMA

Program

TRACK01

TRACK 1.mp3

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Clear All

OFF

Clear All

NORM.

00:00

0: 56: 18

STER.

Customers should also note that permission is

required in order to download MP3/WMA files and

music from the Internet. Our company has no right

to grant such permission. Permission should

always be sought from the copyright owner.

Audio CD menu

MP3/WMA menu

Tips

If you are in a file list and want to return to the Folder

list, use the to highlight and press ENTER to

Microsoft, Windows Media, and the

Windows Logo are trademarks or

registered trademarks of Microsoft

Corporation in both the United States

and other countries

return to the previous menu screen.

To stop playback at any other time, press STOP.

1-20

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc (Continued)

MP3

WMA

Pause

Repeat A-B

1 Press PAUSE/STEP during playback.

To repeat a sequence.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

1 During disc playback, press A-B RPT at your desired

starting point.

The Repeat icon and “ * ” appears on the menu screen.

2 Press A-B RPT again at your desired end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

MP3

Moving to another Track

WMA

3 To exit the sequence and return to normal play, press

A-B RPT again.

The Repeat icon and “OFF” appears on the menu screen.

^zPress SKIP

playback to go to the next track or to return to the

beginning of the current track.

briefly during

^zPress SKIP

vious track.

twice briefly to step back to the pre-

Selecting the sound enhancement

^zIn case of audio CD, to go directly to any track, enter

the track number using the numbered buttons (0-9)

during playback.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

MP3

WMA

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu

screen.

1 Press E.A.M. to select “3D SUR” during playback.

2 To turn off the 3D Surround effect, press E.A.M. again

to select “NORM.”.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appears on the menu screen.

Changing the Audio Channel

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

MP3

WMA

during playback.

1 Press REV

or FWD

The player will now go into SEARCH mode.

2 Press REV

required speed:

or FWD

X2,

repeatedly to select the

X4, X8 (backward) or

X2,

X4,

X8 (forward).

Search speed and direction are indicated on the menu

screen.

3 To exit SEARCH mode, press PLAY.

MP3

WMA

Random

1 Press RANDOM during playback or when playback is

stopped.

The unit automatically begins Random Playback and

RANDOM or “RAND.” appears on the display window

and menu screen.

2 To return to normal playback, press RANDOM repeat-

edly until RANDOM or “RAND.” disappears on the

display window and menu screen.

1-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with JPEG Disc

JPEG

Moving to another File

Viewing a JPEG disc

Press SKIP

once during viewing a picture

This DVD Player can play discs with JPEG files. Before

playing JPEG recordings, read the notes on JPEG

Recordings on right.

to advance to the next file or to the previous file.

Still Picture

1 Press PAUSE/STEP during slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press PLAY or press

PAUSE/STEP again.

Insert a disc and close the tray.

The MP3/WMA-JPEG choice menu appears on the

TV screen.

MP3 WMA

JPEG

To flip the picture

Press

during showing a picture to flip the

picture horizontally or a vertically.

Press

to select the JPEG then press

2 _ENTER.

To rotate picture

The JPEG menu appears on the TV screen.

Press

during showing a picture to rotate the

JPEG

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

picture clockwise or counter clockwise.

Notes on JPEG Recordings

Off

Slide Speed

^zDepending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.

Press

to select a folder, and ENTER.

3 _{A list of files in the folder appears.}

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

^zTotal number of files and folders on the disc should

be less than 650.

Tip

If you are in a file list and want to return to the Folder

list, use the

^zSome disc may be incompatible due to different

recording format or condition of disc.

buttons on the remote to highlight

“

and press ENTER to return to the previous menu

”

z When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

screen.

If you want to view a particular file, press

4 _{highlight a file and press ENTER or PLAY.}

z If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

Viewing the file proceeding starts.

During viewing a file, press RETURN to move to

the previous menu (JPEG menu).

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

z File names without “.jpg” extension will not be able to

be read by this DVD player. Even though the files are

shown as JPEG image files in windows explorer.

Folder1

JPEG

Picture1.jpg

Picture2.jpg

Picture3.jpg

Picture4.jpg

Picture5.jpg

Picture6.jpg

Picture7.jpg

Off

5/32

1024X768

Slide Speed

5/32

1024X768 Picture5.jpg

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Press to highlight the Slide

Speed then press to select the option you want to

use, and press ENTER.

To stop viewing at any other time, press STOP.

5 _{The JPEG menu appears.}

1-22

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

WMA

Programmed Playback

Programmed Playback with Audio CD

and MP3/WMA Disc

The Program function enables you to store your favorite

tracks from any disc in the player memory.

Programmed Playback with Video CD

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 14.

Program can contain 30 tracks.

Insert Video CD and close the tray.

Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

The

mark will appear to the right of the word Program

on the right side of the menu screen.

Program

VCD

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Note

Press PROGRAM to exit the Program Edit mode;

the

mark will disappear.

Clear All

Select a track, then press ENTER to place the

2 _{selected track on the Program list.}

Note

Repeat step 2 to place additional tracks on the

Press RETURN or PROGRAM to exit the Program menu.

3 _{Program list.}

Follow steps 2-6 of “Programmed Playback with

Program

TRACK 8.mp3

MP3 WMA

Program

3 _{Audio CD and MP3/WMA disc” on left.}

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 1.mp3

TRACK 2.mp3

TRACK 4.mp3

TRACK 3.mp3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

To resume normal playback from

programmed playback, press PROGRAM.

“PROG.” indicator disappears in the display window.

Clear All

OFF

Clear All

NORM.

00:00

0: 56: 18

STER.

Repeat Programmed Tracks

Audio CD menu

Press

The programmed track you selected last is highlighted on

the program list.

MP3/WMA menu

^zTo repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu

screen.

^zTo repeat all tracks on the program list, press

REPEAT a second time.

Press

to select the track you want to start

The Repeat icon and “ALL” appears on the menu screen.

^zTo cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

5 _playing.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

Press PLAY to start.

Erasing a Track from Program List

1 Press PROGRAM during playback (Audio CD and

MP3/WMA disc only) or in the stop mode to enter the

Program Edit mode.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

The

mark will appear.

To resume normal playback from pro-

grammed playback, select a track of CD (or

MP3/WMA) list and then press ENTER.

“PROG.” indicator disappears on the menu screen.

2 Press to move to the Program list.

3 Use to select the track that you wish to erase

from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2 Use

to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

1-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

VCD2.0

VCD1.1

Screen Saver

DVD

Video Mode Setting

The screen saver picture appears when you leave the

DVD Player in stop mode for about five minutes.

After the Screen Saver has been engaged for about five

minutes, the DVD Player will automatically turn itself off.

With certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

Dimmer Function

^zTo change the video mode, press and hold

DISPLAY about 3 seconds during disc playback. The

new video mode number selected is displayed on the

TV screen. Check whether the video quality has

improved. If not, repeat the above procedure until pic-

ture quality is improved.

You can adjust the Display Window’s brightness in

3 steps. Each press of the FL DIM button modifies the

Display Window’s brightness in the following order:

Normal → Dim → Display Off → Normal

^zVideo mode sequence:

Auto

→ Film → Video → Auto

^zIf you turn off the power, the video mode will return to

initial default state (Auto).

Detailed Description of each Video Mode

Auto : The source material of the DVD video (film material or

video material) is determined from disc information.

Film : Suitable for playing film based content or video based

material recorded by the progressive scan method.

Video : Suitable for playing video based content with

comparatively little motion.

Note

The video mode setting only works when the

Progressive Scan mode is set to “On” on the setup

menu.

1-24

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

z The power cord is disconnected.

z Plug the power cord into the wall outlet

securely.

z No disc is inserted.

z Insert a disc. (Check that the DVD or,

audio CD indicator in the display

window is lit.)

The power is on, but

the DVD player does

not work.

z The TV is not set to receive DVD signal z Select the appropriate video input mode

No picture.

output.

on the TV so the picture from the DVD

player appears on the TV screen.

z The video cable is not connected

z Connect the video cable securely.

securely.

z The connected TV power is turned off.

z Turn on the TV.

No sound.

z The equipment connected with the

audio cable is not set to receive DVD

signal output.

z Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD player.

z The audio cables are not connected

z Connect the audio cable securely.

securely.

z The power of the equipment connected

with the audio cable is turned off.

z Turn on the equipment connected with

the audio cable.

z The Digital Audio Output is set to the

wrong position.

z Set the Digital Audio Output to the

correct position, then turn on the DVD

player again by pressing ON/STANDBY.

The playback picture is z The disc is dirty.

z Clean the disc.

poor.

z No disc is inserted.

z Insert a disc. (Check that the DVD, or

audio CD indicator in the DVD display is

lit.)

The DVD player does

not start playback.

z An unplayable disc is inserted.

z Insert a playable disc. (Check the disc

type, color system, and Regional code.)

z The disc is placed upside down.

z The disc is not placed within the guide.

z Place the disc with the playback side

down.

z Place the disc on the disc tray correctly

inside the guide.

z The disc is dirty.

z Clean the disc.

z The Rating level is set.

z Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

z The remote control is not pointed at the

remote sensor of the DVD player.

z Point the remote control at the remote

sensor of the DVD player.

z The remote control is too far from the

DVD player.

z Operate the remote control within 23 ft

(7 m).

z There is an obstacle in the path of the

z Remove the obstacle.

remote control and the DVD player.

z The batteries in the remote control are

z Replace the batteries with new ones.

exhausted.

1-25

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 13).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

1-26

Download from Www.Somanuals.com. All Manuals Search And Download.

Area Code List

Enter the appropriate code number for the initial setting “Area Code” (See page 15).

Code Area

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Australia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

1-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

AC 120V, 60 Hz

14W

430 X 60 X 242 mm (16.9 x 2.4 x 9.5 inches) (w x h x d)

2.4 kg (5.3 lbs)

Operating temperature

Operating humidity

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

System

Laser

Semiconductor laser, wavelength 650 nm

NTSC

Signal system

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT connectors only)

Less than 0.008%

More than 100 dB (DVD)

More than 95 dB (CD)

Outputs

VIDEO OUT

S-VIDEO OUT

1 Vp-p 75 Ω, sync negative, RCA jack x 1

(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

0.5 V (p-p), 75 Ω, RCA jack x 1

5 V (p-p), 75 Ω, Optical connector x 1

2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1

Accessory

Video cable . . . . . . . . . . . . . . . . . . . . . . .1

Audio cable . . . . . . . . . . . . . . . . . . . . . . .1

Remote control . . . . . . . . . . . . . . . . . . . .1

Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2

^zDesign and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

1-28

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY DVD VIDEO PLAYER

Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii, Inc. (“THI”) make the following limited warranties to origi-

nal consumers for DVD Players purchased and used in the United States. THESE LIMITED WARRANTIES EXTEND TO THE

ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL

CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.

PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.

Limited One (1) Year Warranty*

Your Responsibility

TACP/THI warrants this DVD Player against defects in

materials or workmanship for a period of one (1) year after the

date of the original retail purchase. DURING THIS PERIOD

TACP/THI WILL, AT TACP/THI’S OPTION, REPAIR OR

EXCHANGE A DEFECTIVE DVD PLAYER WITH A NEW OR

REFURBISHED DVD PLAYER, AT TACP/THI’s OPTION.

DURING THE INITIAL NINETY (90) DAYS, THIS REPAIR OR

EXCHANGE WILL BE WITHOUT CHARGE TO YOU, EXCEPT

YOU MUST PAY FOR ALL TRANSPORTATION AND

INSURANCE CHARGES FOR THE DVD PLAYER TO BE

SHIPPED TO THE DESIGNATED TACP/THI FACILITY. AFTER

THE INITIAL NINETY (90) DAYS AND FOR THE REMAINDER

OF THE WARRANTY PERIOD, AN ADDITIONAL HANDLING

FEE WILL APPLY. YOU MUST DELIVER THE ENTIRE DVD

PLAYER AND ALL ACCESSORIES (SUCH AS POWER

CORDS, CABLES, AND THE UNIT’S REMOTE CONTROL

DEVICE) TO THE DESIGNATED TACP/THI FACILITY, AS

INSTRUCTED BY TACP/THI. TACP/THI IS NOT

THE ABOVE LIMITED WARRANTIES ARE SUBJECT TO THE

FOLLOWING CONDITIONS:

(1) You must provide your bill of sale or other proof of

purchase. For rental firms, proof of first rental is also

required.

(2) The limited warranties from TACP and THI are effective

only if the DVD Player is purchased and operated in the

U.S.A. or Puerto Rico.

(3) Labor service charges for installation, set up, and

adjustment of customer controls are not covered by these

limited warranties.

(4) These limited warranties extend only to defects in materials

or workmanship as limited above and do not extend to any

DVD Player or accessories which have been lost or

discarded by you, or to damage to any DVD Player or

accessories caused by misuse, accident, Acts of God

(such as lightning), or to fluctuations in electric power,

improper installation, improper maintenance or use in

violation of instructions furnished by TACP/THI; or to units

which have been modified or which have had the serial

number removed, altered, defaced or rendered illegible.

RESPONSIBLE IF YOUR DVD PLAYER IS LOST OR

DAMAGED DURING SHIPMENT.

*Commercial Units

DVD Players sold and used for commercial purposes have a

limited ninety (90) day warranty.

(5) Physically damaged DVD Players are not acceptable for

repair or exchange whether in or out of warranty and will

be returned as received.

Rental Units

How to Obtain Warranty Services

The warranty period for rental units begins with the first rental

or thirty (30) days from the date of shipment to the rental firm,

whichever comes first.

If, after following all of the operating instructions in this manual

and checking the “Troubleshooting” section, you find that

service is needed, call one of the following Customer Solutions

Centers to obtain further instructions. Have your proof of

purchase and your model and serial numbers available when

you call.

Owner’s Manual and Demographic Card

You should read this owner’s manual thoroughly before

operating this DVD Player. You should complete and mail the

enclosed Demographic Card within ten days after you, or the

person who has given you this product as a gift, purchased this

DVD Player. This is one way to enable TACP/THI to provide

you with better customer service and improved products.

Failure to return the Demographic Card will not affect your

rights under this warranty.

For DVD Players purchased in the United States,

except Hawaii, call TACP, toll free at 1-866-583-7353.

For DVD Players purchased in Hawaii, call THI. at

808-591-9281.

For additional updates, visit TACP’s web site:

www.toshiba.com/tacp.

1-29

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY DVD VIDEO PLAYER (Continued)

LIMITATION OF IMPLIED WARRANTIES

Time for Taking Action

ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE

OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION

OF THE LIMITED WARRANTIES SET FORTH ABOVE.

The time within which action must be commenced to enforce

any obligation of TACP or THI arising under this limited

warranty or under any law of the United States or of any state

thereof is hereby limited to 90 days from the date you

discovered, or should have discovered, the defect. This

limitation does not apply to implied warranties arising under

the law of any state of the U.S.A.

LIMITATION OF WARRANTY

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY

THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY

LIMITED, THE FOREGOING LIMITED WARRANTY IS

EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,

GUARANTEES, AGREEMENTS AND SIMILAR OBLIGATIONS

OF TACP OR THI WITH RESPECT TO YOUR DVD PLAYER.

HOW STATE LAW RELATES TO WARRANTY

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY

VARY FROM STATE TO STATE IN THE U.S.A.

SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITA-

TIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,

WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLU-

SION OR LIMITATION OF INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLU-

SIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUM-

STANCES.

EXCLUSION OF DAMAGES

IN NO EVENT SHALL TACP OR THI BE LIABLE FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES.

No Change, Modification, or Extension

No person, agent, distributor, dealer or company is authorized

to change, modify or extend the terms of these limited war-

ranties in any manner whatsoever.

ATTENTION CANADIAN CONSUMERS:

Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this

completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be

purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by

these warranties.

Contact: Toshiba of Canada Limited

Consumer Electronics Group

191 McNabb Street

Markham, Ontario L3R 8H2

(905)-470-5400

Consumer Electronics Group

22171 Fraserwood Way

Richmond, B.C. V6W 1J5

(604)-303-2500

Consumer Electronics Group

1643 North Service Road

Droval, QC H9P 1J1

(514)-856-4100

IMPORTANT: PACKING AND SHIPPING INSTRUCTION

When you send the product to a Service Station, you must use the original carton box and packing material, then insert the origi-

nal carton box containing the unit into another carton using more packing material.

1-30

Download from Www.Somanuals.com. All Manuals Search And Download.

P/NO: 3834RS0054M

Printed in China

1-31

Download from Www.Somanuals.com. All Manuals Search And Download.

PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS

CAUTION : DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY,

NEVER PERFORM CUSTOMIZED INSTALLATIONS WITHOUT MANUFAC-

TURER’S APPROVAL. UNAUTHORIZED MODIFICATIONS WILL NOT ONLY

VOID THE WARRANTY, BUT MAY LEAD TO YOUR BEING LIABLE FOR ANY

RESULTING PROPERTY DAMAGE OR USER INJURY.

SUBJECT : X-RADIATION

1. BE SURE PROCEDURES AND INSTRUCTIONS TO ALL SERVICE PER-

SONNEL COVER THE SUBJECT OF X-RADIATION. THE ONLY POTEN-

TIAL SOURCE OF X-RAYS IN CURRENT T.V. RECEIVERS IS THE PIC-

TURE TUBE. HOWEVER, THIS TUBE DOES NOT EMIT X-RAYS WHEN

THE HIGH VOLTAGE IS AT THE FACTORY SPECIFIED LEVEL. THE

PROPER VALUE IS GIVEN IN THE APPLICABLE SCHEMATIC. OPERA-

TION AT HIGHER VOLTAGES MAY CAUSE A FAILURE OF THE PIC-

TURE TUBE OR HIGH VOLTAGE SUPPLY AND, UNDER CERTAIN CIR-

CUMSTANCES, MAY PRODUCE RADIATION IN EXCESS OF DESIR-

ABLE LEVELS.

SERVICE WORK SHOULD BE PERFORMED ONLY AFTER YOU ARE

THOROUGHLY FAMILIAR WITH ALL OF THE FOLLOWING SAFETY

CHECKS AND SERVICING GUIDELINES. TO DO OTHERWISE,

INCREASES THE RISK OF POTENTIAL HAZARDS AND INJURY TO THE

USER.

WHILE SERVICING, USE AN ISOLATION TRANSFORMER FOR PROTEC-

TION FROM A.C. LINE SHOCK.

2. ONLY FACTORY SPECIFIED C.R.T. ANODE CONNECTORS MUST BE

USED. DEGAUSSING SHIELDS ALSO SERVE AS X-RAY SHIELD IN

COLOR SETS, ALWAYS RE-INSTALL THEM.

SAFETY CHECKS

AFTER THE ORIGINAL SERVICE PROBLEM HAS BEEN CORRCTED. A

CHECK SHOULD BE MADE OF THE FOLLOWING.

3. IT IS ESSNTIAL THAT SERVICE PERSONNEL HAVE AVAILABLE AN

ACCURATE AND RELIABLE HIGH VOLTAGE METER. THE CALIBRA

TION OF THE METER SHOULD BE CHECKED PERIODICALLY

AGAINST A REFERENCE STANDARD, SUCH AS THE ONE AVAILABLE

AT YOUR DISTRIBUTOR.

SUBJECT : FIRE & SHOCK HAZARD

1. BE SURE THAT ALL COMPONENTS ARE POSITIONED IN SUCH A WAY

AS TO AVOID POSSIBILITY OF ADJACENT COMPONENT SHORTS.

THIS IS ESPECIALLY IMPORTANT ON THOSE MODULES WHICH ARE

TRANSPORTED TO AND FROM THE REPAIR SHOP.

4. WHEN THE HIGH VOLTAGE CIRCUITRY IS OPERATING PROPERLY

THERE IS NO POSSIBILITY OF AN X-RADIATION PROBLEM. EVERY

TIME A COLOR CHASSIS IS SERVICED. THE BRIGHTNESS SHOULD

BE RUN UP AND DOWN WHILE MONITORING THE HIGH VOLTAGE

WITH A METER TO BE CERTAIN THAT THE HIGH VOLTAGE DOES

NOT EXCEED THE SPECIFIED VALUE AND THAT IT IS REGULATING

CORRECTLY, WE SUGGEST THAT YOU AND YOUR SERVICE ORGA-

NIZATION REVIEW TEST PROCEDURES SO THAT VOLTAGE REGU-

LATION IS ALWAYS CHECKED AS A STANDARD SERVICING PROCE-

DURE. AND THAT THE HIGH VOLTAGE READING BE RECORDER ON

EACH CUSTOMER’S INVOICE.

2. NEVER RELEASE A REPAIR UNLESS ALL PROTECTIVE DEVICES

SUCH AS INSULATORS, BARRIERS, COVERS, SHIELDS, STRAIN

RELIEFS, POWER SUPPLY CORDS, AND OTHER HARDWARE HAVE

BEEN REINSTALLED PER ORIGINAL DESIGN. BE SURE THAT THE

SAFETY PURPOSE OF THE POLARIZED LINE PLUG HAS NOT BEEN

DEFEATED.

3. SOLDERING MUST BE INSPECTED TO DISCOVER POSSIBLE COLD

SOLDER JOINTS, SOLDER SPLASHES OR SHARP SOLDER POINTS.

BE CERTAIN TO REMOVE ALL LOOSE FOREIGN PARTICLES.

5. WHEN TROUBLESHOOTING AND MAKING TEST MEASUREMENTS IN

A PRODUCT WITH A PROBLEM OF EXCESSIVE HIGH VOLTAGE,

AVOID BEING UNNECESSARILY CLOSE TO THE PICTURE TUBE AND

THE HIGH VOLTAGE SUPPLY. DO NOT OPERATE THE PRODUCT

LONGER THAN IS NECESSARY TO LOCATE THE CAUSE OF EXCES

SIVE VOLTAGE.

4. CHECK FOR PHYSICAL EVIDENCE OF DAMAGE OR DETERIORATION

TO PARTS AND COMPONENTS. FOR FRAYED LEADS, DAMAGED

INSULATION (INCLUDING A.C. CORD). AND REPLACE IF NECESSARY

FOLLOW ORIGINAL LAYOUT, LEAD LENGTH AND DRESS.

5. NO LEAD OR COMPONENT SHOULD TOUCH A RECIVING TUBE OR

A RESISTOR RATED AT 1 WATT OR MORE. LEAD TENSION AROUND

PROTRUNING METAL SURFACES MUST BE AVOIDED.

6. REFER TO HV. B+ AND SHUTDOWN ADJUSTMENT PROCEDURES

DESCRIBED IN THE APPROPRIATE SCHEMATIC AND DIAGRAMS

(WHERE USED).

6. ALL CRITICAL COMPONENTS SUCH AS FUSES, FLAMEPROOF

RESISTORS, CAPACITORS, ETC. MUST BE REPLACED WITH EXACT

FACTORY TYPES, DO NOT USE REPLACEMENT COMPONENTS

OTHER THAN THOSE SPECIFIED OR MAKE UNRECOMMENDED CIR-

CUIT MODIFICATIONS.

SUBJECT: IMPLOSION

1. ALL DIRECT VIEWED PICTURE TUBES ARE EQUIPPED WITH AN INTE

GRAL IMPLOSION PROTECTION SYSTEM, BUT CARE SHOULD BE

TAKEN TO AVOID DAMAGE DURING INSTALLATION, AVOID

SCRATCHING THE TUBE. IF SCRATCHED REPLACE IT.

7. AFTER RE-ASSEMBLY OF THE SET ALWAYS PERFORM AN A.C.

LEAKAGE TEST ON ALL EXPOSED METALLIC PARTS OF THE CABI-

NET, (THE CHANNEL SELECTOR KNOB, ANTENNA TERMINALS. HAN-

DLE AND SCREWS) TO BE SURE THE SET IS SAFE TO OPERATE

WITHOUT DANGER OF ELECTRICAL SHOCK. DO NOT USE A LINE

ISOLATION TRANSFORMER DURING THIS TEST USE AN A.C. VOLT-

METER, HAVING 5000 OHMS PER VOLT OR MORE SENSITIVITY, IN

THE FOLLOWING MANNER; CONNECT A 1500 OHM 10 WATT RESIS-

TOR, PARALLELED BY A .15 MFD. 150.V A.C TYPE CAPACITOR

BETWEEN A KNOWN GOOD EARTH GROUND (WATER PIPE, CON-

DUIT, ETC.) AND THE EXPOSED METALLIC PARTS, ONE AT A TIME.

MEASURE THE A.C. VOLTAGE ACROSS THE COMBINATION OF 1500

OHM RESISTOR AND .15 MFD CAPACITOR. REVERSE THE A.C. PLUG

AND REPEAT A.C. VOLTAGE MEASUREMENTS FOR EACH EXPOSED

METALLIC PART. VOLTAGE MEASURED MUST NOT EXCEED 75

VOLTS R.M.S. THIS CORRESPONDS TO 0.5 MILLIAMP A.C ANY

VALUE EXCEEDING THIS LIMIT CONSTITUTES A POTENTIAL SHOCK

HAZARD AND MUST BE CORRECTED IMMEDIATELY.

2. USE ONLY RECOMMENDED FACTORY REPLACEMENT TUBES.

SUBJECT : TIPS ON PROPER INSTALLATION

1. NEVER INSTALL ANY PRODUCT IN A CLOSED-IN RECESS, CUBBY-

HOLE OR CLOSELY FITTING SHELF SPACE. OVER OR CLOSE TO

HEAT DUCT, OR IN THE PATH OF HEATED AIR FLOW.

2. AVOID CONDITIONS OF HIGH HUMIDITY SUCH AS: OUTDOOR PATIO

INSTALLATIONS WHERE DEW IS A FACTOR, NEAR STEAM RADIA-

TORS WHERE STEAM LEAKAGE IS A FACTOR, ETC.

3. AVOID PALCEMENT WHERE DRAPERIES MAY OBSTRUCT REAR

VENTING. THE CUSTOMER SHOULD ALSO AVOID THE USE OF DEC-

ORATIVE SCARVES OR OTHER COVERINGS WHICH MIGHT

OBSTRUCT VENTILATION.

4. WALL AND SHELF MOUNTED INSTALLATIONS USING A COMMER-

CIAL MOUNTING KIT. MUST FOLLOW THE FACTORY APPROVED

MOUNTING INSTRUCTIONS A PRODUCT MOUNTED TO A SHELF OR

PLATFORM MUST RETAIN ITS ORIGINAL FEET (OR THE EQUIVALENT

THICKNESS IN SPACERS) TO PROVIDE ADEQUATE AIR FLOW

ACROSS THE BOTTOM, BOLTS OR SCREWS USED FOR FASTENERS

MUST NOT TOUCH ANY PARTS OR WIRING. PERFORM LEAKAGE

TEST ON CUSTOMIZED INSTALLATIONS.

A.C. VOLTMETER

5. CAUTION CUSTOMERS AGAINST THE MOUNTING OF A PRODUCT ON

SLOPING SHELF OR A TILTED POSITION, UNLESS THE PRODUCT IS

PROPERLY SECURED.

6. A PRODUCT ON A ROLL-ABOUT CART SHOULD BE STABLE ON ITS

MOUNTING TO THE CART. CAUTION THE CUSTOMER ON THE HAZ-

ARDS OF TRYING TO ROLL A CART WITH SMALL CASTERS ACROSS

THRESHOLDS OR DEEP PILE CARPETS.

GOOD EARTH GROUND

SUCH AS THE WATER

PIPE. CONDUIT. ETC

PLACE THIS PROBE

ON EACH EXPOSED

METAL PART

7. CAUTION CUSTOMERS AGAINST THE USE OF A CART OR STAND

WHICH HAS NOT BEEN LISTED BY UNDERWRITERS LABORATORIES,

INC. FOR USE WITH THEIR SPECIFIC MODEL OF TELEVISION

RECEIVER OR GENERICALLY APPROVED FOR USE WITH T.V.’S OF

THE SAME OR LARGER SCREEN SIZE.

SUBJECT: GRAPHIC SYMBOLS

THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN

AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE

SERVICE PERSONNEL TO THE PRESENCE OF UNINSULATED

“DANGEROUS VOLTAGE” THAT MAY BE OF SUFFICIENT MAG-

NITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK.

8. CAUTION CUSTOMERS AGAINST THE USE OF EXTENSION CORDS,

EXPLAIN THAT A FOREST OF EXTENSIONS SPROUTING FROM A SIN-

GLE OUTLET CAN LEAD TO DISASTROUS CONSEQUENCES TO

HOME AND FAMILY.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIAN-

GLE IS INTENDED TO ALERT THE SERVICE PERSONNEL TO

THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN

SERVICE LITERATURE.

1-32

Download from Www.Somanuals.com. All Manuals Search And Download.

SERVICING PRECAUTIONS

CAUTION : Before servicing the DVD covered by this service

Electrostatically Sensitive (ES) Devices

data and its supplements and addends, read and follow the

SAFETY PRECAUTIONS. NOTE : if unforeseen circum-

stances create conflict between the following servicing pre-

cautions and any of the safety precautions in this publica-

tions, always follow the safety precautions.

Some semiconductor (solid state) devices can be damaged

easily by static electricity. Such components commonly are

called Electrostatically Sensitive (ES) Devices. Examples of

typical ES devices are integrated circuits and some field

effect transistors and semiconductor chip components.

The following techniques should be used to help reduce the

incidence of component damage caused by static electricity.

Remembers Safety First:

General Servicing Precautions

1. Always unplug the DVD AC power cord from the AC

power source before:

(1) Removing or reinstalling any component, circuit board,

module, or any other assembly.

(2) Disconnection or reconnecting any internal electrical

plug or other electrical connection.

1. Immediately before handling any semiconductor compo-

nent or semiconductor-equipped assembly, drain off any

electrostatic charge on your body by touching a known

earth ground. Alternatively, obtain and wear a commer-

cially available discharging wrist strap device, which

should be removed for potential shock reasons prior to

applying power to the unit under test.

(3) Connecting a test substitute in parallel with an elec-

trolytic capacitor.

Caution : A wrong part substitution or incorrect

polarity installation of electrolytic capacitors may result

in an explosion hazard.

2. After removing an electrical assembly equipped with ES

devices, place the assembly on a conductive surface such

as aluminum foil, to prevent electrostatic charge buildup or

exposure of the assembly.

2. Do not spray chemicals on or near this DVD or any of

its assemblies.

3. Use only a grouned-tip soldering iron to solder or unsolder

ES devices.

3. Unless specified otherwise in this service data, clean

electrical contacts by applying an appropriate contact

cleaning solution to the contacts with a pipe cleaner,

cotton-tipped swab, or comparable soft applicator.

Unless specified otherwise in this service data, lubrication

of contacts is not required.

4. Use only an anti-static solder removal device. Some

solder removal devices not classified a “anti-static” can

generate electrical charges sufficient to damage ES

devices.

5. Do not use freon-propelled chemicals. These can

generate electrical charge sufficient to damage ES

devices.

4. Do not defeat any plug/socket B+ voltage interlocks with

whitch instruments covered by this service manual might

be equipped.

6. Do not remove a replacement ES device from its protec

tive package until immediately before you are ready to

install it. (Most replacement ES devices are packaged with

leads electrically shorted together by conductive foam,

aluminum foil, or comparable conductive material).

5. Do not apply AC power to this DVD and/or any of its

electrical assemblies unless all solid-state device heat

sinks are cerrectly installed.

6. Always connect test instrument ground lead to the

appropriate ground before connection the test instrument

positive lead. Always remove the test instrument ground

lead last.

7. Immediately before removing the protective material from

the leads of a replacement ES device, touch the protective

material to the chassis or circuit assembly into which the

device will be installed.

Insulation Checking Procedure

Disconnect the attachment plug from the AC outlet and turn

the power on. Connect an insulation resistance meter(500V)

to the blades of the attachment plug. The insulation resis-

tance between each blade of the attachment plug and acces-

sible conductive parts (Note 1) should be more than 1M-

ohm.

Caution : Be sure no power is applied to the chassis or

circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged

replacement ES devices. (Normally harmless motion such

as the brushing together of your clothes fabric or the lifting

of your foot from a carpeted floor can generate static elec-

tricity sufficient to damage an ES device.)

Note 1 : Accessible Conductive Parts including Metal pan-

els, Input terminals, Earphone jacks, etc.

1-33

Download from Www.Somanuals.com. All Manuals Search And Download.

Taylor Frozen Dessert Maker C004 C007 User Manual
Telex Stereo System 870 20 User Manual
Toshiba Barcode Reader B EV4D SERIES User Manual
Toshiba DVD VCR Combo DVR670 User Manual
Troy Bilt Trimmer TB70SS User Manual
U Line Freezer 75F User Manual
Visual Land Tablet ME 107 L 8GB BLK User Manual
Vita Mix Blender BarBos MP User Manual
Vivotek Security Camera IP8337H C User Manual
Walker Indoor Furnishings WQ44CMPTB User Manual