Viking Cooktop 033111 User Manual

Viking Use & Care Manual

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Designer DGVU

Built-In Gas Cooktops

F20679C EN

09VK3140 ed. 11-10

(033111)

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT–^{Please Read and Follow}

Warning and Important Safety Instructions appearing in this manual

are not meant to cover all possible conditions and situations that

may occur. Common sense, caution, and care must be exercised

when installing, maintaining, or operating this appliance.

To Prevent Fire or Smoke Damage

•

Be sure all packing materials are removed from the appliance before

operating it.

Keep area around appliance clear and free from combustible materials,

gasoline, and other flammable vapors and materials.

If appliance is installed near a window, proper precautions should be

taken to prevent curtains from blowing over burners.

NEVER leave any items on the cooktop. The hot air from the vent may

ignite flammable items and may increase pressure in closed containers

which may cause them to burst.

ALWAYS contact the manufacturer about problems or conditions you

do not understand.

Recognize Safety Symbols, Words, Labels

•

Many aerosol-type spray cans are EXPLOSIVE when exposed to heat and

may be highly flammable. Avoid their use or storage near an appliance.

Many plastics are vulnerable to heat. Keep plastics away from parts of

the appliance that may become warm or hot. DO NOT leave plastic

items on the cooktop as they may melt or soften if left too close to the

vent or a lighted surface burner.

DANGER

Hazards or unsafe practices which WILL result in

severe personal injury or death

WARNING

•

Combustible items (paper, plastic, etc.) may ignite and metallic items may

become hot and cause burns. DO NOT pour spirits over hot foods.

Hazards or unsafe practices which COULD result in

death or severe personal injury

In Case of Fire

Turn off appliance and ventilating hood to avoid spreading the flame.

Extinguish flame, then turn on hood to remove smoke and odor.

•

Smother fire or flame in a pan with a lid or cookie sheet.

NEVER pick up or move a flaming pan.

DO NOT use water on grease fires. Use baking soda, a dry chemical or

foam-type extinguisher to extinguish fire or flame. Let fat cool before

attempting to handle it.

CAUTION

Hazards or unsafe practices which COULD result in

minor personal injury or property damage.

All safety messages will identify the hazard, tell you

how to reduce the chance of injury, and tell you what can happen

if the instructions are not followed.

Child Safety

•

NEVER leave children alone or unsupervised near the appliance when it

is in use or is still hot.

NEVER allow children to sit or stand on any part of the appliance as

they could be injured or burned.

DO NOT store items of interest to children over the unit. Children

climbing to reach items could be seriously injured.

Children must be taught that the appliance and utensils in it can be hot.

Let hot utensils cool in a safe place, out of reach of small children.

Children should be taught that an appliance is not a toy. Children

should not be allowed to play with controls of other parts of the

appliance.

Read and follow all instructions before using this appliance

to prevent the potential risk of fire, electric shock, personal injury or

damage to the appliance as a result of improper usage of the

appliance. Use appliance only for its intended purpose as described

in this manual.

To ensure proper and safe operation: Appliance must be properly

installed and grounded by a qualified technician. DO NOT attempt to

adjust, repair, service, or replace any part of your appliance unless it

is specifically recommended in this manual. All other servicing should

be referred to a qualified servicer. Have the installer show you the

location of the gas shutoff valve and how to shut it off in an

emergency. A certified technician is required for any adjustments or

conversions to Natural or LP gas.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT–^{Please Read and Follow}

Cooking Safety

•

Once the unit has been installed as outlined in the Installation

Instructions, it is important that the fresh air supply is not obstructed.

The use of a gas cooking appliance results in the production of heat

and moisture in the room in which it is installed. Ensure that the kitchen

is well-ventilated. Keep natural venting holes open or install a

mechanical ventilation device. Prolonged or intensive use of the

appliance may call for additional (such as opening a window) or more

effective ventilation (such as increasing the level of a mechanical

ventilation if present).

•

To eliminate the hazard of reaching over hot surface burners, cabinet

storage should not be provided directly above a unit. If storage is

provided, it should be limited to items which are used infrequently and

which are safely stored in an area subjected to heat from an appliance.

Temperatures may be unsafe for some items, such as volatile liquids,

cleaners or aerosol sprays.

•

ALWAYS place a pan on a surface burner before turning it on. Be sure

you know which knob controls which surface burner. Make sure the

correct burner is turned on and that the burner has ignited. When

cooking is completed, turn burner off before removing pan to prevent

exposure to burner flame.

Cookware Safety

•

Use pans with flat bottoms and handles that are easily grasped and stay

cool. Avoid using unstable, warped, easily tipped or loose-handled

pans. Also avoid using pans, especially small pans, with heavy handles

as they could be unstable and easily tip. Pans that are heavy to move

when filled with food may also be hazardous.

Be sure cookware is large enough to properly contain food and avoid

boil overs. Pan size is particularly important in deep fat frying. Be sure

pan will accommodate the volume of food that is to be added as well

as the bubble action of fat.

•

ALWAYS adjust surface burner flame so that it does not extend beyond

the bottom edge of the pan. An excessive flame is hazardous, wastes

energy and may damage the appliance, pan or cabinets above the

appliance. This is based on safety considerations.

NEVER leave a surface cooking operation unattended especially when

using a high heat setting or when deep fat frying. Boil overs cause

smoking and greasy spillovers may ignite. Clean up greasy spills as soon

as possible. DO NOT use high heat for extended cooking operations.

DO NOT heat unopened food containers, build up of pressure may

cause the container to explode and result in injury.

•

Cookware Safety (cont.)

•

To minimize burns, ignition of flammable materials and spillage due to

unintentional contact with the utensil, DO NOT extend handles over

adjacent surface burners. ALWAYS turn pan handles toward the side or

back of the appliance, not out into the room where they are easily hit or

reached by small children.

Cooking Safety (cont.)

•

Use dry, sturdy pot-holders. Damp pot-holders may cause burns from

steam. Dishtowels or other substitutes should NEVER be used as

potholders because they can trail across hot surface burners and ignite

or get caught on appliance parts.

•

NEVER let a pan boil dry as this could damage the utensil and the

appliance.

•

ALWAYS let quantities of hot fat used for deep fat frying cool before

attempting to move or handle.

DO NOT let cooking grease or other flammable materials accumulate in

or near the appliance, hood or vent fan. Clean hood frequently to

prevent grease from accumulating on hood or filter. When flaming

foods under the hood, turn the fan off.

•

Follow the manufacturer's directions when using oven cooking bags.

Only certain types of glass, glass/ceramic, ceramic or glazed cookware

are suitable for cooktop surface without breaking due to the sudden

change in temperature. Follow manufacturer's instructions when

using glass.

•

NEVER wear garments made of flammable material or loose fitting or

long-sleeved apparel while cooking. Clothing may ignite or catch utensil

handles. DO NOT drape towels or materials on oven door handles.

These items could ignite and cause burns.

PREPARED FOOD WARNING: Follow food manufacturer's instructions.

If a plastic frozen food container and/or its cover distorts, warps, or is

otherwise damaged during cooking, immediately discard the food and

its container. The food could be contaminated.

•

This appliance has been tested for safe performance using conventional

cookware. DO NOT use any devices or accessories that are not

specifically recommended in this guide. DO NOT use eyelid covers for

the surface units, stovetop grills, or add-on oven convection systems.

The use of devices or accessories that are not expressly recommended

in this manual can create serious safety hazards, result in performance

problems, and reduce the life of the components of the appliance.

The flame of the burner should be adjusted to just cover the bottom of

the pan or pot. Excessive burner setting may cause scorching of

adjacent counter-top surfaces, as well as the outside of the cookware.

This is based on safety considerations.

If you are “flaming” liquor or other spirits under an exhaust, TURN THE

FAN OFF. The draft could cause the flames to spread out of control.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT–^{Please Read and Follow}

Glass Ceramic Cooking Surfaces

•

NEVER touch the glass surface areas directly on or adjacent to the

burners when the cooktop is in use.

CAUTION

BURN HAZARD

•

During and after use, DO NOT touch or let clothing or other flammable

material contact surface of cooktop or areas near burners, until they

have had sufficient time to cool.

To avoid risk of injury, DO NOT touch the glass. The cooktop

will get hot during usage.

•

DO NOT COOK ON BROKEN COOKING SURFACE. If cooking surface

should break, cleaning solutions and spillovers may penetrate the

broken cooking surface and create a risk of electric shock. Contact a

qualified technician immediately.

CAUTION

DO NOT store items of interest to children over the unit. Children

climbing to reach items could be seriously injured.

Cleaning Safety

•

Turn off all controls and wait for appliance parts to cool before touching

or cleaning them. DO NOT touch the burners or surrounding areas until

they have had sufficient time to cool.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

•

Clean appliance with caution. Use care to avoid steam burns if a wet

sponge or cloth is used to wipe spills on a hot surface. Some cleaners

can produce noxious fumes if applied to a hot surface.

Important notice regarding pet birds:

NEVER keep pet birds in the kitchen or in rooms where the fumes from the

kitchen could reach. Birds have a very sensitive respiratory system. Fumes

released due to overheated cooking oil, fat, margarine and overheated

non-stick cookware may be equally harmful.

About Your Appliance

WARNING

NEVER use appliance as a space heater to heat or warm a room to prevent

potential hazard to the user and damage to the appliance. Also, DO NOT

use the cooktop as a storage area for food or cooking utensils

Power Failure

If power failure occurs, the electric igniters will not work. No attempt

should be made to operate the appliance during a power failure.

Momentary power failure can occur unnoticed. The cooktop is affected

only when the power is interrupted. When it comes back on, the cooktop

will function properly without any adjustments.

WARNING

BURN OR ELECTRICAL SHOCK

HAZARD

To avoid risk of injury or death, make sure all

controls are OFF and COOL before cleaning.

Failure to do so can result in burns or electrical shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Using Cooktop

Cooktop Features

All products are wiped clean with solvents at the factory to remove

any visible signs of dirt, oil, and grease which may have remained from the

manufacturing process. Clean your gas glass top before the first time

you use it. A thorough cleaning with a glass top cleaner is recommended.

Before cooking, clean the cooktop thoroughly with a hot, soapy damp

cloth.

30”W. Four Burner

1. 4,000 Nat./LP (BTU) burner

2. 12,000 Nat./LP (BTU) burner

3. 15,000 Nat./LP (BTU) burner

4. 9,000 Nat./LP (BTU) burner

5. Left rear burner control knob

6. Left front burner control knob

7. Right rear burner control knob

8. Right front burner control knob

All models include:

• Automatically electric spark ignition/re-ignition burners light at any

position on the knob and re-light if extinguished.

• Removable knobs, grates, burner ports/caps.

• Permanently sealed burners—spills cannot enter burner box.

Cookware

Each cook has his or her own preference for the particular cooking

vessels that are most appropriate for the type of

cooking being done. Any and all cookware,

including Viking cookware, is suitable for use.

This is a matter of personal choice. As with any

cookware, yours should be in good condition

and free from excessive dents on the bottom to

provide maximum performance and convenience.

36”W. Six Burner

Note: The flame of the burner should be adjusted to just cover the bottom

of the pan or pot. Excessive burner setting may cause scorching of

adjacent counter-top surfaces, as well as the outside of the cookware. This

is based on safety considerations.

1. 4,000 Nat./LP (BTU) burner

2. 9,000 Nat./LP (BTU) burner

3. 12,000 Nat./LP (BTU) burner

4. 15,000 Nat./LP (BTU) burner

5. 12,000 Nat./LP (BTU) burner

6. Left rear burner control knob

7. Left front burner control knob

8. Center rear burner control knob

9. Right front burner control knob

10.Right rear burner control knob

Download from Www.Somanuals.com. All Manuals Search And Download.

Surface Operation

Lighting Burners

All burners are ignited by electric ignition.

There are no open-flame, “standing” pilots.

Surface Cooking Tips

•

The simmer line on the control panel is the minimum variable setting

and produces a low flame for simmering delicate items.

•

Use low or medium flame heights when cooking in cookware that are

poor conductors of heat, such as glass, ceramic, and cast iron. Reduce

the flame height until it covers approximately 1/3 of the cookware

diameter. This will ensure more even heating within the cookware and

reduce the likelihood of burning or scorching the food.

Surface Burners-Automatic Reignition

To light the surface burners, push and turn the

appropriate control knob counterclockwise to

any position. This control is both a gas valve

and an electric switch. Burners will ignite at any “ON” position with the

automatic re-ignition system. If the flame goes out for any reason, the

burners will automatically reignite if the gas is still flowing. When gas is

permitted to flow to the burners, the electric igniters start sparking. On all

surface igniters you should hear a “clicking” sound. If you do not, turn off

the control and check that the unit is plugged in and that the fuse or circuit

breaker is not blown or tripped.

•

Reduce the flame if it is extended beyond the bottom of the cookware.

A flame that extends along the sides of the cookware is potentially

dangerous, heats the cookware handle and kitchen instead of the food,

and wastes energy.

Reduce the flame height to the minimum level necessary to perform the

desired cooking process. Remember that food cooks just as quickly at a

gentle boil as it does at a rolling boil. Maintaining a higher boil than is

necessary causes a loss in food flavor and nutrients.

Rear and Front Burners

•

Use pans that are 9" or less in diameter on the FRONT burners. Using

pans larger than 9" could cause damage to the cooktop.

For pans larger than 9" in diameter, use the right rear burner. This

burner is designed to bring pans to a boil quickly.

Push in and turn the control knob counter-clockwise to the desired setting.

The control knobs can be turned to any desired setting as the knobs do

not have fixed positions between “hi” and “simmer”.

Surface Heat Settings*

Within a few moments, enough gas will have traveled to the burner to

light. When the burner lights, turn the burner control to any position to

adjust the flame size. Setting the proper flame height for the desired

cooking process and selecting the correct cooking vessel will result in

superior cooking performance, while also saving time and energy.

Heat Setting

Simmer

Use

Melting small quantities

Steaming rice

Simmering sauces

Melting large quantities

Low

Note: The igniters may click a number of times before the burner ignites.

This is normal. All igniters will spark regardless of which burner is being

operated.

Low-temperature frying (eggs, etc.)

Simmering large quantities

Heating milk, cream sauces, gravies,

and puddings

Med Low

Sautéing and browning, braising, and pan-frying

Maintaining slow boil on large quantities

Med

High-temperature frying

Pan broiling

Med High

Maintaining fast boil on large quantities

Boiling water quickly

High

Deep-fat frying in large cookware

*Note: The above information is given as a guide only. You may need to

vary the heat settings to suit your personal requirements.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Maintenance

Cooking Substitutes Charts

In many cases, a recipe requires an ingredient which is not readily available

or calls for a unit of measure that is not easily recognized. The following

charts have been provided as useful guides in these situations.

Any piece of equipment works better and lasts longer when maintained

properly and kept clean. Cooking equipment is no exception. Your

cooktop must be kept clean and maintained properly. Before cleaning,

make sure all controls are in the “off” position.

Ingredient Substitutes

Surface Burners

Recipe calls for:

Substitute with:

1 tbsp. cornstarch

2 tbsp. flour (thickening)

Burner grate

1 whole egg

2 egg yolks plus 1 tbsp. water

1 c. skim milk plus 2 tbsp. margarine or

1/2 c. evaporated milk plus 1/2 c. water

1 c. whole milk

1 oz. unsweetened chocolate 3 tbsp. cocoa powder plus 1 tbsp. margarine

Burner

cap

1 tbsp. baking powder

1/2 tsp. cream of tartar plus 1/4 tsp. baking

soda

Igniter

Burner

1/2 c. butter

7 tbsp. margarine or shortening

head

1 c. dairy sour cream

1 tbsp. lemon juice plus 1 c. evaporated milk

Burner

base*

Canned Food Sizes

Can Size

8 oz.

Contents

Can Size

No. 303

No. 2

Contents

2 c.

1 c.

*Note: When replacing burner head, carefully align the tab underneath the

cap with the slot in the burner base.

Picnic

1-3/4 c.

2 c.

2-1/2 c.

4 c.

No. 300

No. 1 tall

No. 3

Wipe up spill-overs as soon as possible after they occur and before they

get a chance to burn in and cook solid. In the event of a spill-over, follow

these steps:

No. 10

12 c.

Kitchen Equivalent and Metrics

• Allow the burner and grate to cool to a safe temperature level.

• Lift off the burner grate. Wash in warm soapy water.

• Remove the burner cap and burner head and clean.

Measure

1 tbsp.

2 tbsp.

1 jig.

Equivalent

3 tsp

Metric*

15 mL

30 mL

45 mL

60 mL

1 oz

Burner Caps

1-1/2 oz

4 tbsp.

The surface burner caps should be routinely removed and cleaned.

ALWAYS clean the burner caps after a spill-over. Keeping the burner caps

clean will prevent improper ignition and uneven flames. To clean, pull

burner cap straight up from the burner base. Wipe off surface burner caps

with warm, soapy water and a soft cloth after each use. Use a non-abrasive

cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad for

cooked-on foods. Dry thoroughly after cleaning. For best cleaning and to

avoid possible rusting, DO NOT clean in dishwasher or self-cleaning oven.

1/4 c.

1/3 c.

1/2 c.

1 c.

5 tbsp. plus 1 tsp.

8 tbsp.

80 mL

125 mL

250 mL

30 g

16 tbsp.

2 c.

1 pt.

1 lb.

16 oz

454 g

2.21 lb.

35.3 oz

1 kg

*Note: Rounded for easier measuring.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Maintenance

Burner Head

Stainless Steel Parts

If ports on burner head are clogged, clean with a straight pin. DO NOT

enlarge or distort the ports. DO NOT use a toothpick to clean the ports.

When replacing burner head, carefully align the 2 tabs underneath the

burner head with the outside edge of burner base. Make sure the tabs are

not aligned with the igniter and the burner cap is level.

Some stainless steel parts may have a protective wrap, which must be peeled

off. All stainless steel body parts should be wiped regularly with hot, soapy

water at the end of each cooling period and with liquid cleaner designed for

this material when soapy water will not do the job. If build-up occurs, DO NOT

use steel wool, or abrasive cloths, cleaners, or powders. If it is necessary to

scrape stainless steel surface to remove encrusted material, soak area with hot,

wet towels to loosen the material, then use a wooden or nylon spatula or

scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape

stainless steel surfaces. Scratches are almost impossible to remove. DO NOT

permit citrus or tomato juice to remain on stainless steel surface, as citric acid

will permanently discolor stainless steel. Wipe up any spills immediately

Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™

and a soft brush or soft Scotch Brite™ pad.

Cleaning Tip: For difficult to clean burner caps and heads, place parts in a

zip seal bag with ammonia.

Burner Base

The base should be wiped regularly with hot soapy water at the end of

each cooling period. DO NOT use steel wool, abrasive cloths, cleanser, or

powders. To remove encrusted materials, soak the area with a hot towel to

loosen the material, then use a wooden nylon spatula. DO NOT use a

metal knife, spatula, or any other metal tool to scrape the aluminum base.

• Wipe up any spills which remain on the sealed top surface.

• Replace burner cap, burner head, and grates after drying thoroughly.

CAUTION

All special ordered brass parts are coated with an epoxy coating.

DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON

ANY BRASS PARTS. All brass body parts should be wiped regularly

with hot soapy water. When hot soapy water will not do the job, use

every day household cleaners that are not abrasive.

Cooktop Surfaces

Brass Parts

Several different finishes have been used in your cooktop. Cleaning

instructions for each surface are given below. NEVER USE AMMONIA,

STEEL WOOL PADS OR ANY ABRASIVE CLOTHS AND MATERIALS SUCH

AS CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN

PERMANENTLY DAMAGE YOUR COOKTOP.

All special ordered brass parts are coated with epoxy.

Burner Flames

Turn each burner on. Flames should be blue in color with no trace of

yellow. The burner flames should not flutter or blow away from the burner.

The inner cone of the flame should be between 1/2” and 3/4” long.

Control Panel

DO NOT use any cleaners containing ammonia, abrasives, or stainless

steel cleaners on any surface that contains graphics. They could remove

the graphics from the control panel. Use hot, soapy water and a soft clean

cloth. DO NOT spray liquids directly onto control panel.

COOKTOP

BURNER

-1/2” to 3/4”

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE “OFF”

POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in

detergent and warm water. Dry completely and replace by pushing firmly

onto stem. DO NOT use any cleaners containing ammonia or abrasives.

Burner flames

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Service Information

If service is required, call your dealer or authorized service agency.

The name of the authorized service agency can be obtained from the

dealer or distributor in your area.

Problem

Possible Cause and/or Remedy

Igniters will not work.

Circuit is tripped.

Fuse is blown.

Cooktop is not connected to power.

Have the following information readily available:

Igniters sparking but no

flame ignition.

Gas supply valve is in “OFF” position.

Gas supply is interrupted.

•

Model number

Serial number

Date purchased

Name of dealer from whom purchased

Igniters sparking

continuously after flame

ignition.

Power supply is not grounded.

Power supply polarity is reversed.

Igniters are wet or dirty.

Burner ignites but flame is

large, distorted, or yellow.

Burner ports are clogged.

Unit is being operated on wrong type of gas.

Air shutters not properly adjusted.

Clearly describe the problem that you are having. If you are unable to

obtain the name of an authorized service agency, or if you continue

to have service problems, contact Viking Range Corporation at

1-888-VIKING1 (845-4641), or write to:

VIKING RANGE CORPORATION

PREFERRED SERVICE

1803 Hwy 82W

Greenwood, Mississippi 38930 USA

Record the information indicated below. You will need it if service is ever

required. The model and serial number for your cooktop can be found by

looking under the unit.

Model no. _________________________________________________________________________

Serial no. __________________________________________________________________________

Date of purchase ________________________________________________________________

Date installed ____________________________________________________________________

Dealer’s name ____________________________________________________________________

Address ___________________________________________________________________________

_____________________________________________________________________________________

If service requires installation of parts, use only authorized parts to insure

protection under the warranty.

Keep this manual for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

Notes

DESIGNER SERIES

GAS COOKTOPS WARRANTY

_____________________________________________________________________________________________________

ONE YEAR FULL WARRANTY

Gas cooktops and all of their component parts, except as detailed below*, are warranted to be free from

defective materials or workmanship in normal household use for a period of twelve (12) months from the date

of original retail purchase. Viking Range Corporation, warrantor, agrees to repair or replace, at its option, any

part which fails or is found to be defective during the warranty period.

*Glass (including light bulbs), painted and decorative items are warranted to be free from defective materials

or workmanship for a period of ninety (90) days from the date of original retail purchase. ANY DEFECTS MUST

BE REPORTED TO THE SELLING DEALER WITHIN NINETY (90) DAYS FROM DATE OF ORIGINAL RETAIL

PURCHASE.

Viking Range Corporation uses the most up-to-date processes and best materials available to produce all color finishes.

However, slight color variation may be noticed because of the inherent differences in painted parts and porcelain parts

as well as differences in kitchen lighting, product locations, and other factors.

FIVE YEAR LIMITED WARRANTY

Any surface burner which fails due to defective materials or workmanship in normal household use during the

second through fifth year from the date of original retail purchase will be repaired or replaced, free of charge

for the part itself, with the owner paying all other costs, including labor.

NINETY (90) DAY RESIDENTIAL PLUS WARRANTY

This warranty applies to applications where use of the product extends beyond normal residential use. Examples are,

but not limited to, bed and breakfasts, fire stations, private clubs, churches, etc. This warranty excludes all commercial

locations such as restaurants, food service locations and institutional food service locations.

This warranty extends to the original purchaser of the product warranted hereunder and to each transferee

owner of the product during the term of the warranty.

This warranty shall apply to products purchased and located in the United States and Canada. Products must

be purchased in the country where service is requested. Warranty labor shall be performed by an authorized

Viking Range Corporation service agency or representative. Warranty shall not apply to damage resulting from

abuse, accident, natural disaster, loss of electrical power to the product for any reason, alteration, outdoor use,

improper installation, improper operation, or repair or service of the product by anyone other than an

authorized Viking Range Corporation service agency or representative. This warranty does not apply to

commercial usage. Warrantor is not responsible for consequential or incidental damage whether arising out of

breach of warranty, breach of contract, or otherwise. Some jurisdictions DO NOT allow the exclusion or

limitation of incidental of consequential damages, so the above limitation or exclusion may not apply to you.

Owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of

purchase upon request, and making the appliance reasonably accessible for service. If the product or one of its

component parts contains a defect or malfunction during the warranty period, after a reasonable number of

attempts by the warrantor to remedy the defects or malfunctions, the owner is entitled to either a refund or

replacement of the product or its component part or parts. Warrantor’s liability on any claim of any kind, with

respect to the goods or services covered hereunder, shall in no case exceed the price of the goods or service

or part thereof which gives rise to the claim.

WARRANTY SERVICE

Under the terms of this warranty, service must be performed by a factory authorized Viking Range Corporation

service agent or representative. Service will be provided during normal business hours, and labor performed at

overtime or premium rates shall not be covered by this warranty. To obtain warranty service, contact the dealer

from whom the product was purchased, an authorized Viking Range Corporation service agent, or Viking

Range Corporation. Provide model and serial number and date of original purchase. For the name of your

nearest authorized Viking Range Corporation service agency, call the dealer from whom the product was

purchased or Viking Range Corporation. IMPORTANT: Retain proof of original purchase to establish warranty

period.

The return of the Owner Registration Card is not a condition of warranty coverage. You should, however,

return the Owner Registration Card so that Viking Range Corporation can contact you should any question of

safety arise which could affect you.

Any implied warranties of merchantability and fitness applicable to the above described surface burner, griddle

burner, grill burner, oven burner, porcelain oven, or porcelain inner door panel are limited in duration to the

period of coverage of the applicable express written limited warranties set forth above. Some jurisdictions DO

NOT allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which may vary from

jurisdiction to jurisdiction.

Specifications subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

_____________________________________________________________________________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

Thermaltake Power Supply 575W User Manual
TMC Telephone ET4300 User Manual
Top Innovations Iron SF 717 User Manual
Toro Utility Trailer 3040 User Manual
Toshiba DVD Player HD A2KC User Manual
Uniden Scanner BCT15 User Manual
Vanguard Managed Solutions Network Card 340E 342 User Manual
Vision Fitness Home Gym ST750 User Manual
Vita Spa Hot Tub LD 15 Series User Manual
Vizio Flat Panel Television XVT3D500CM User Manual