®
ViewSonic
VT1900LED
LED TV
- User Guide
- Guide de líutilisateur
- GuÌa del usuario
IMPORTANT: Please read this User Guide to obtain important infor-
mation on installing and using your product in a safe manner, as well
as registering your product for future service. Warranty information
contained in this User Guide will describe your limited coverage from
ViewSonic Corporation, which is also found on our web site at http://
Regional selection box in the upper right corner of our website.
“Before operating the equipment, read the
instructions in this manual carefully.”
Model No.: VS13231-1M
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV. Compumantenimietnos Garantizados, S.A. de C.V.
Calle Juarez 284 local 2
AV. GREGORIO MENDEZ #1504
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
E-Mail: [email protected]
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
Puebla, Pue. (Matriz):
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail: [email protected]
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
Oaxaca, Oax.:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
FOR USA SUPPORT:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
ViewSonic
ii
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Wall Mount
vice team: United States 1-800-688-6688, Canada 1-866-463-4775.
Safety Instructions
The symbol is intended to alert the user to presence of un-insulated “Hazardous
Voltage” within the product’s enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
This symbol is intended to alert the user that improper use of the product may result in
product malfunction. The user should pay attention to avoid accidents or unnecessary
problems.
Wet Location
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Outdoor Use
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Disconnect Device - The Mains Plug or An Appliance
Coupler
The mains plug or an appliance coupler is used as the disconnect device for disconnection from
the mains, the disconnect device shall remain readily operable.
ViewSonic
iii
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Product Registration .........................................................................................i
Product disposal at the end of product life ......................................................................... i
Customer Support .............................................................................................i
Safety Instructions ..........................................................................................iii
Wet Location ....................................................................................................iii
Important Safety
ANTENNAS ....................................................................................................................... 4
CLEANING ........................................................................................................................ 4
INSTALLATION ................................................................................................................. 6
VOLUME ADJUSTMENT .................................................................................................. 7
LCD SCREEN ................................................................................................................... 7
Declaration of RoHS Compliance ....................................................................9
Disconnecting the stand .................................................................................................. 11
Mounting ViewSonic LED TV to the wall ......................................................................... 12
Wall Mount Kit Specifications (VESA) ............................................................................. 13
Front View .......................................................................................................14
Rear View .......................................................................................................15
Cable System and VHF/UHF Antenna System ............................................................... 17
Inserting Remote Control Batteries ................................................................................. 21
Remote Control and TV Controls .................................................................................... 22
Turning the TV On and Off .............................................................................................. 24
ViewSonic
iv
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the View Mode Settings............................................................................... 28
Cleaning the LED TV ......................................................................................40
Disclaimer ........................................................................................................................ 40
Limited Warranty ............................................................................................44
Mexico Limited Warranty ...............................................................................45
ViewSonic
v
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
ViewSonic
1
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
NOTIFICATION
Installation
Do not expose this TV to rain or mois-
ture. It may increase the risk to fire or
electronic shock.
This device has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of
the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in a
residential installation. This device
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that
interference will not occur in a particu-
lar installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:
• The TV should be installed near an
easily accessible power outlet.
• To prevent internal heat buildup, do
not block the ventilation openings.
• Do not install the TV in a hot or
humid place, or in a place subject to
excessive dust or mechanical
vibration.
• Avoid operating the TV at
temperatures below 41ºF (5ºC).
• When the TV is transported directly
from a cold to a warm location, or if
the room temperature changes sud-
denly, the picture may be blurred or
show poor color due to moisture
condensation. In this case, please
wait a few hours before turning on
the TV, in order to let the moisture
evaporate first.
• To ensure best picture quality, do not
expose the screen to direct illumina-
tion or sunlight. We recommend you
use spot lighting directed down from
the ceiling or to cover the windows
that face the screen with opaque cur-
tains. It is better that TV is installed
where the floor and walls are not of a
reflective material.
Dangerous Voltage:
The lightning flash with
arrowhead
symbol,
within an equilateral tri-
angle, is intended to alert
the user to the presence
of dangerous voltage
within the inside of the
product that may be suf-
ficient level to constitute
a risk of electric shock to
persons.
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
device and receiver.
• Connect the device into an outlet on
a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Instruction: The
exclamation point within
an equilateral triangle is
intended to alert the user
to the presence of impor-
tant operating and servic-
ing instructions in the
literature accompanying
the appliance.
To Customers
To install the specified TV, sufficient
expertise is required. Make sure you
subcontract the installation to ViewS-
onic dealer or licensed contractors and
pay adequate attention to safety during
the installation.
Pursuant to FCC regulations, be
cautioned that any changes or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.
The TV shall not be exposed to drip-
ping or splashing. Do not put objects
filled with liquids, such as vases, on the
TV.
Note
Safety
This television includes
a
QAM
CAUTION
• Operate the TV on 120V and
240 V AC only.
demodulator, which should allow you
to receive unscrambled digital cable
television programming via subscrip-
tion service to a cable service provider.
The type of programming and signal
provided by your cable service pro-
vider will affect the availability of digi-
tal cable television programming in
your area.
To prevent electric shock, do not use
this polarized AC plug with an exten-
sion cord, receptacle or other outlet
unless the blades can be fully inserted
to prevent blade exposure.
• Use the AC power cord specified by
ViewSonic and suitable for the volt-
age where you use it.
• The plug is designed, for safety pur-
poses, to fit into the wall outlet only
one way.
• If you are unable to insert the plug
fully into the outlet, contact your
dealer.
• If any liquid or solid object should
fall inside the cabinet, stop operat-
ing, unplug the TV immediately and
have it checked by qualified service
technician.
• If you will not be using the TV for a
long time, disconnect the power by
pulling the plug itself. Do not pull on
the cord.
• For details concerning safety precau-
tions, refer to Important Safety
instructions on page 4.
Declaration of Conformity
Trade Name: ViewSonic Model:
N1630w Responsible Party: ViewS-
onic Corporation Address: 381 Brea
Canyon Road, Walnut, CA. 91789
USA Telephone Number: 1-800-688-
6688 This device complies with part 15
of the FCC rules. Operation is subject
to the following two conditions: 1)
This device may not cause harmful
interference, and 2)
Trademark
Information
Macintosh is a trademark of Apple
Inc., registered in the U.S. and other
countries. HDMI, the HDMI logo and
High-Definition Multimedia Interface
are trademarks or registered trade-
marks of Dolby Laboratories.
Blu-ray Disc is a trademark. Adobe is a
registered trademark or a trademark of
Adobe Systems Incorporated in United
States and/or other countries.
this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
ViewSonic
2
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
USE
Important Safety
Instructions
AC power Cord
Keep the following guidelines to protect the AC
power cord from being damaged. If the AV power
cord is damaged, it may result in a fire or an elec-
tric shock. Stop using it and ask your dealer or
ViewSonic service center to exchange it.
• Do not place the TV where the power cord is
subject to wear or abuse.
• Do not pinch, bend, or twist the cord exces-
sively.
• The core lines may be bared and cut, causing a
short-circuit, and resulting in a fire or an electric
shock.
1. Read these instructions completely before
using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install
the equipment in accordance with the manu-
facturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
• Do not convert or damage the
registers, stoves, or other devices
power cord.
(including amplifiers) that pro-
duce heat.
• Avoid power cord being rolled
over or rested upon.
9. Do not attempt to circumvent the safety pro-
visions of the polarized or grounding-type
plug. A polarized plug has two blades with
one wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade and the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an elec-
trician for replacement of the outlet.
10. Prevent the power cord from being tread upon
or pinched, particularly at the plug, conve-
nience receptacles, and the point where they
exit from the device. Be sure that the power
outlet is located near the equipment so that it
is easily accessible.
• When the power cord is plugged in, do not
move the TV.
• Keep the power cord away from heat sources.
• When you disconnect the AC power cord, dis-
connect it from the wall outlet first.
• When disconnecting the power cord, grasp the
plug instead of pulling the power cord.
• Use only an original ViewSonic AC power
cord, not other brands.
• Do not use the supplied AC power cord on any
other equipment.
Wall outlet
The TV set with a three-wire ground-
ing type AC power cord plug must be
connected to an AC power socket
outlet with a protective grounding
connection.
Do not use an unfitting outlet. Insert
the plug fully into the outlet. If it is
loose, do not use it. Doing so may cause arcing
and result in a fire. Contact your electrician to
change the outlet.
11. Only use attachments/ accessories specified
by the manufacturer.
12. Use only with the cart, stand, tri-
pod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus when it will be unused
for a long period of time.
Wiring
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause
damage to the TV set.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, or the unit does not operate
normally, or has been dropped.
Electric shock
Do not touch the AC power cord or
the TV with a wet hand. If you plug/
unplug the AC power cord from the
TV with a wet hand, it may cause
electric shock.
ViewSonic
3
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Lightning storms
grounding conductors, location of antenna dis-
charge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
During a lightning storm, unplug the TV from the
wall outlet and disconnect the antenna to prevent
damage to the TV.
Antenna grounding according to the
National Electrical Code, ANS/NFPA 70
Antenna
When not in use
If you will not be using the TV set for long peri-
ods of time, the TV set should be disconnected
from the AC power outlet to prevent power line
surges. The TV set is not disconnected from the
AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from
the AC power outlet.
Ground clamp
Antenna discharge
Electric service
unit
equipment
Ground clamps
Grounding conductors
Power service grounding
electrode system
Overloading
This TV set is designed to operate on
a 120 - 240 V AC supply only. If
there are too many appliances con-
nected to the same AC power outlet,
it could result in a fire or an electric
shock.
BATTERIES
• Do not cast away batteries in a fire.
• Do not disassembled, overheat, or short-circuit the
batteries.
• If the battery is replaced in the wrong way, it may cause
danger of explosion. Replace only with the same or equiv-
alent type.
Optional equipment
If optional equipment is to be installed, leave
some space between optional equipment and the
TV set. Picture distortion and/or noisy sound may
occur if the TV set is positioned in close proxim-
ity to any equipment emitting electromagnetic
radiation.
Dispose used batteries
To preserve our environment, dispose of used
batteries according to your local laws or
regulations.
CLEANING
Small accessories
Keep small accessories in a safe place where chil-
dren are unable to reach.
Cleaning the AC power plug
Unplug the AC power plug and
clean it regularly. If the plug is cov-
ered with dust and gathers moisture,
its insulation may deteriorate and
result in a fire.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the pre-
cautions below.
Cleaning the screen surface/
Do not install the outdoor antenna system near of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits.
cabinet of the TV set
When cleaning this TV, unplug the
AC power cord. If not, it may
result in electric shock. Use a dry
soft cloth to clean the cabinet of
the TV. To remove dust near the
WHEN INSTALLING AN OUTDOOR
ANTENNA SYSTEM, EXTREME CARE
SHOULD BE TAKEN TO KEEP FROM CON-
TACTING SUCH POWER LINES OR CIR-
CUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
screen, wipe it gently with a soft cloth. Stubborn
stains may be removed with a cloth slightly
dampened with a solution of mild soap and warm
water. Never use strong solvents such as thinner
or benzine for cleaning. If using a chemically pre-
treated cloth, please follow the instruction pro-
vided on the package. The ventilation holes can
accumulate dust over time.
To ensure proper ventilation, we recommend you
to remove the dust periodically (once a month)
using a vacuum cleaner, while the LED TV is
powered off.
Be sure the antenna system is grounded so that it
can provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. and Section 54 of the Cana-
dian Electrical Code in Canada provides informa-
tion with in regard to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
ViewSonic
4
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never install the TV face up, down or
sideways.
• Never install the TV turned over or upside
down.
• Never cover the slots and openings with a
cloth or other materials.
MAGNETIC INFLUENCE
This TV contains a strong magnet in the speaker
unit that generates a magnetic field. Keep any
items susceptible to magnetic fields away from
the speaker.
• Never block the slots and openings by
placing the TV on a bed, sofa, rug or other
similar surface.
• Never place the TV in a confined space,
such as a bookcase or built-in cabinet,
unless proper ventilation is provided.
SOUND
If you hear snapping or popping
sound comes from the TV continu-
ously or frequently while the TV is
operating, unplug the TV and consult
your dealer or service technician. It is
normal for some TVs to make occasional snap-
ping or popping sounds, particularly when being
turned on or off.
Leave some space around the TV set as shown
below. Otherwise, air-circulation may be inade-
quate and cause overheating, which may cause a
fire or damage to the TV set.
CARRYING THE TV
Carry the TV as instructed
To prevent dropping the TV and causing serious
injury, you must follow these guidelines:
• Disconnect all cables before carrying the TV.
• Carrying the large size TV requires at least two or three
people.
• When you carry the TV, place your hands as illustrated and
hold it securely. Do not put stress on the LCD panel and
the frame around the screen.
Installed on the wall
11.875 inches
(30.16 cm)
4 inches
(10 cm)
4 inches
(10 cm)
• When carrying the TV, do not subject it to shocks, vibra-
tion, or excessive force.
• When lifting or moving the TV, hold it securely from the
bottom. Place your palm directly under the panel.
4 inches
(10 cm)
Installed with stand
11.875 inches
(30.16 cm)
4 inches
(10 cm)
4 inches
(10 cm)
2.375 inches
(6.03 cm)
Leave at least this space around the set.
Do not install the TV set as follows:
VENTILATION
Air circulation is blocked.
Air circulation is blocked.
Slots and openings in TV are provided for ventila-
tion. To ensure reliable operation of the TV and to
protect it from overheating, be sure these open-
ings are not blocked or covered.
The TV may accumulate dust and get dirty if
proper ventilation is not provided. For proper ven-
tilation, follow the following guidelines:
ViewSonic
5
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not place the TV in hot, oily, humid or
excessively dusty places.
• Do not install the TV where insects may
enter.
• Do not install the TV where it may be
exposed to mechanical vibration.
• Do not install the TV in a location where it may spear up,
such as on or behind a pillar, or where you might bump
your head on it. It may cause injury.
Objects and ventilation holes
Never push any objects into the slots on the TV
cabinet as they may touch dangerous voltage
points or short out parts that could result in a fire
or an electric shock. Do not place any objects on
the TV.
MOISTURE
Moisture and flammable objects
• Keep the product away from moisture. Do not expose this
appliance to rain or
moisture. Do not place objects filled with liquids, such as
vases, on the TV.
• Do not use power-line operated V sets near water, such as
in places like a bathtub, washbowl, kitchen sink, laundry
tub, a wet basement, or near a swimming pool, etc. It may
cause fire or electric shock.
• Do not let this TV get wet. Never spill liq-
uid of any kind on the TV. If water pene-
trates into the product, unplug the power
cord and contact ViewSonic.
• Do not operate the TV when wet. It may
result in electric shock or damage to the
TV.
• To prevent fire, keep flammable objects or
open flame (e.g. candles) away from the
TV.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the
TV to a wall or stand.
Placement for watching
We suggest you to watch the TV at a distance of
3-7 times that of the screen height, and not in
excessive brightness. It is easy to cause eye
fatigue if you watch TV for too long or in a dark
room. To obtain clear picture, do not expose the
screen to direct illumination or sunlight. Use spot
lighting directed down from the ceiling if you can.
Use in outdoor
This TV is not designed for out-
doors installation. Do not expose
the TV to rain, as it may result in
a fire or an electric shock. Also,
do not expose the TV to direct
sunlight, as it may heat up and become damaged.
INSTALLATION
To do Wall mount installation, you need a Wall-
Mount Bracket. When installing or removing the
TV using the Wall-Mount Bracket, be sure to use
qualified contractors. If not properly secured dur-
ing installation or removal from the Wall-Mount
Bracket, the TV may fall and cause serious injury.
Vehicle, ships and other vessels
Do not install this TV in a vehicle.
Car accidents may cause the TV to
fall down and cause injury.
Do not install this TV in a ship or
vessel.
Optional wall mount
If the TV is exposed to seawater, it
may cause a fire or damage the TV.
• When installing the TV using a Wall-Mount Bracket, make
sure you follow the operating instructions supplied with
the Wall-Mount Bracket.
Medical institutions
• Attach the brackets supplied with the Wall-Mount Bracket.
• The TV is not designed for hanging from the ceiling. It
may fall and cause serious injury.
Do not place this TV in a place where medical
equipment is in use. It may cause the medical
equipment to malfunction.
Placement
The TV should be installed near an easily accessi-
ble AC power outlet.
Observe the following to prevent the TV from
falling from the stand or wall mount.
• Place the TV on a stable, level surface.
• Do not hang anything on the TV. Do not
allow children to climb on the TV.
• Do not install the TV in places subject to
extreme temperature, such as in direct sun-
light, near a radiator, or heating vent. If the TV is exposed
to extreme temperature, the TV may overheat and cause
deformation of the enclosure or cause malfunction.
• Do not install the TV in a place exposed to direct air condi-
tioning. If the TV is installed in such a location, moisture
may condense inside and may cause a malfunction.
ViewSonic
6
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Broken pieces
VOLUME ADJUSTMENT
Do not throw anything at the TV.
Doing so may break the screen glass
and cause serious injury.
If the surface of the TV cracks,
unplug the AC power cord before touching the
TV. Otherwise electric shock may result.
• Adjust the volume to avoid disturbing your neighbors.
Sound carries easily at night. Therefore, we suggest you
close the windows or use headphones.
• When using headphones, adjust the volume to appropriate
levels, or hearing damage may result.
LCD SCREEN
• Although the LCD screen is made with high precision
technology and has effective pixels of 99.99% or more,
black dots or bright points or light (red, blue, or green)
may appear constantly on the LCD screen. This is a struc-
tural property of the LCD panel and is not a malfunction.
• The LCD screen is made with high-precision technology.
To achieve a high level of performance and picture quality,
this TV’s backlight setting is set to maximize the bright-
ness of the TV. However, uneven brightness may be
observed when the LED TV is viewed in a dark environ-
ment without an input source or a blank screen. This is a
normal condition, not a malfunction of the TV. To improve
this condition, change the Picture mode, Backlight setting,
enable the Light Sensor, or turn on the Power manage-
ment.
• Avoid exposing the LCD screen surface to direct sunlight.
It is likely to damage the LCD panel.
• Do not push or scratch the LCD screen, or place objects on
top of the TV. The image may be uneven or the LCD panel
may be damaged.
• If the TV is used in a cold place, a smear may occur in the
picture or the picture may become dark. It is not caused by
a failure. This condition will improve as the temperature
rises.
Handling of broken glass and liquid
crystal leakage
If the LCD panel gets damaged, crystalline liquid
leakage may occur, or scattered broken glass may
result. Do not touch broken glass or crystalline
liquid which is toxic, with bare hands as cuts, poi-
soning or skin irritation may occur. Also do not
glass fragments or leaked crystalline liquid get
into your eyes or mouth. Should either contacted
your eyes or mouth, rinse the contacted area thor-
oughly with water and consult your doctor.
SERVICING
Do not attempt to repair the TV
yourself, since opening the cabinet
may expose you to dangerous volt-
age or other hazards. Ask qualified
service personnel to do the servicing for your TV.
Replacement parts
• When still pictures are displayed continuously, ghosting
may occur. It should disappear after a short period of time.
• The screen and cabinet get warm when the TV is in use.
This is a normal condition.
• Spraying insect repellent with volatile material on the
screen will cause damage.
When replacement parts are required, be sure the
service technician certifies in writing that he/she
has used replacement parts specified by the manu-
facturer that have the same characteristics as the
original parts. Unauthorized substitutions may
cause a fire, an electric shock or other hazards.
• Do not make prolonged contact with rubber or plastic
material.
Safety check
Upon completion of repairs to the TV, ask the ser-
vice technician to perform routine safety checks
(as specified by the manufacturer) to determine
that the TV is safe for operating, and to so certify.
Ask a qualified service technician to dispose of
the TV.
For Customers in the United States
There is mercury in the lamp of this product.
Disposal of these materials may be regulated due
to environmental considerations. For disposal or
recycling information, please contact your local
authorities or the Electronic Industries Alliance
(http//www.eiae.org).
ViewSonic
7
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ENERGY STAR Information:
• Keeping the TV at its factory default settings that meet ENERGY STAR criteria.
• Enabling certain features and functionality of LED TV will increase its energy
consumption, possibly beyond the limits required for ENERGY STAR qualification.
SRS Trademark Information:
• TruSurround HD, SRS and the
symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
TruSurround HD® creates a truly immersive surround sound experience with rich bass and clear dialog
from only two speakers.
ViewSonic
8
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC
of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
<0.1%
<0.1%
<0.01%
<0.1%
<0.1%
<0.1%
Lead (Pb)
0.1%
0.1%
0.1%
0.01%
0.1%
0.1%
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic
9
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
List of Features
1. Enjoy HDTV with 1366 x 768 (19’’) native image resolution.
TM
2. ClearPicture Technology for high contrast and realistic video.
3. Built-in digital tuners (HDTV, NTSC, Clear QAM-digital cable).
4. Multiple video/computer inputs: HDMI (x2), Composite, VGA.
5. Powerful 6W (3W x 2) speakers.
Package Contents
Check the contents of your package. It should contain:
FAV1
TV
FAV2
HDMI
FAV3
YPbPr
MTS
AV
CC
LAST
INFO.
MUTE
SOURCE
EXIT
ENTER
GUIDE
SLEEP
MENU
PICTURE
WIDE SOUND
LED TV
Remote Control with batteries
©
ViewSonic® LED TV The Door to High Definition
-
1
ViewSonic
Welcome to high definition entertainment. ViewSonic LED TVs bring you
whole new Full HD Experience
a
VT1900LED
LED TV
VT1900LED
LED TV
Quick Start Guide
Before you start using your new ViewSonic LED TV, please read this Quick
Start Guide. This guide will explain how to get great performance from your
new high definition TV
Step 2: Check your accessory contents in package.
Step 3: Install AAA batteries (included in package) in your remote control.
Step 4: Install your TV. If you want to mount the TV on the wall, please refer
the User Guide for detailed instructions.
2
User Guide
Guide de líutilisateur
GuÌa del usuario
For Your Convenience
Enjoy Full HD Experience:
Set up your ViewSonic LED TV by using proper connections to an HD content
source such as your HD cable or satellite box.
This TV is optimized for HDTV
Write down your product serial number.
If you need any assistance, it will help you.
Please contact ViewSonic service team directly if you have ques-
tions on the use of your television.
Please enjoy HDTV with HD programming.
Sources
Comments
&
Quality
Contact ViewSonic Service Team at:
Or call our service team:
HD Over-The-Air Antenna (ATSC)
HD Cable Subscription/Programming
HD Satellite Subscription
Aspect ratio 16:9
Best picture quality
United States 1-800-688-6688
HD/Blue-ray DVD Player
Canada
1-866-463-4775
Over-The-Air Antenna (ATSC)
Cable Subscription/Programming
Satellite Subscription
Digital Content
Aspect Ratio base on program
Good picture quality
Please Do Not Return this Product to the Store
IMPORTANT: Please read this User Guide to obtain important infor-
mation on installing and using your product in
a
safe manner, as well
DVD Player
as registering your product for future service. Warranty information
contained in this User Guide will describe your limited coverage from
ViewSonic Corporation, which is also found on our web site at http://
Regional selection box in the upper right corner of our website.
“Before operating the equipment, read the
For further information, please refer to the User Guide supplied with the TV
Please keep this Quick Start Guide for your future reference.
Over-The-Air Antenna (NTSC)
Cable Programming
Analog Content
Original TV aspect ratio 4:3
Normal picture quality
instructions in this manual carefully.”
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic Quick Start Guide
ViewSonic User Guide
Power Cord
AC Adapter
ViewSonic
10
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Installing the LED TV
Disconnecting the stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Remove the screw securing the base to the stand.
3. Remove the base.
Installing the stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Attach the base to the stand with 1 screw.
ViewSonic
11
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Mounting ViewSonic LED TV to the wall
The LED TV can be used in a free standing or wall-mounted position. Before installing the
product to the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only UL approved wall-mounting brackets to support the LED TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LED TV is already set up for free-standing operation, you need to first remove
the stand before mounting the device to the wall.
To attach the wall-mount bracket to LED TV safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the LED TV.
• Set the LED TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
• Before installing the LED TV on the wall, ensure you have recorded the product serial
number on page (i) of the User Guide, as you will need the serial number to request ser-
vice should there be a service need.
• Install the wall mount plate to the LED TV using screws NO LONGER than 10mm, as
longer screws found in universal (non-ViewSonic) wall mount kits may damage the
power supply causing the unit to fail. The wall-mount screw type is M4 x L10.
• Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your
LED TV to allow adequate cooling during operation.
• Hang the LED TV wall mount plate to the wall mount bracket, completing installation.
Enjoy your ViewSonic LED TV!
ViewSonic
12
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Wall Mount Kit Specifications (VESA)
When attaching to other building materials, please contact your nearest dealer.
A
C
B
D
Product Family
Model
VESA Spec. (A x B)
Standard Screw (C x D)
Quantity
VT1900LED
100 x 100 mm
M4 x L14
4
LED TV
• ViewSonic provides the standard dimensions for wall mount kits as shown in the table
above.
• When purchasing our wall mount kit, a detailed install manual and all parts necessary
for assembly are provided.
• Do not use the screws that are longer than the standard dimension, as they may cause
damage to the inside of the TV set.
service team: United States 1-800-688-6688, Canada 1-866-463-4775.
ViewSonic
13
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front View
2
3
4
5
6
7
1
Item
Description
Remote Control
Receiver
Receives IR signals from the remote control.
1
Lights up in blue when the TV is turned on. Lights
up in orange when the TV is in standby mode.
Power LED Indicator
2
3
MENU
INPUT
Turns OSD menu on/ff.
Selects the input source.
Confirms a selection when in OSD menu.
Increases sound volume.
Moves right to select an item when in OSD menu.
4
5
6
7
Vol +
Vol -
CH
Decreases sound volume.
Moves left to select an item when in OSD menu.
Channels up when the input source is TV.
Moves up to select an item when in OSD menu.
Channels down when source is TV.
Moves down to select an item when in OSD menu.
CH
ViewSonic
14
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Rear View
10
9
8
1
2
3
4
5
6
7
Item
Description
Plug in the supplied AC adapter and connect to the AC-input
power source.
1
2
3
DC In
TV Tuner
Video In
Connects to a cable or antenna TV service.
Connects to an external device, such as a VCR, STB, or a
DVD player.
Connect to an external device, such as a VCR, STB, or a DVD
player.
4
R/L Audio Input
VGA Audio In
5
6
7
8
Connects to Audio Out on your computer.
Connects to VGA Out on your computer.
Connect to an audio output device.
VGA Signal Input
R/L Audio Out
Service Port
For service only. Not available for users.
Connects this port to the HDMI/DVI jack of a compatible
equipment.*
9
HDMI 1 / 2
Use an optical cable to connect to a digital audio receiver
supporting the S/PDIF standard, such as a home theater
receiver.
10 SPDIF
* Note: If you use an HDMI-DVI connection, please use VGA Audio In for audio input.
ViewSonic
15
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
AV connection
Connect the composite video and audio input jacks to the corresponding output jacks of your
A/V device.
• VIDEO: Composite Video input [3]
• AUDIO: AV/ S-Video Audio input [4]
HDMI connection
HDMI (High-Definition Multimedia Interface) is a licensable audio/video connector
interface for transmitting uncompressed, encrypted digital streams between an HDMI
equipped TV and an HDMI equipped audio/video equipment.
• Be sure to use only an HDMI cable that bears the HDMI logo.
• If the equipment has a DVI jack rather than an HDMI jack, connect the DVI jack to the
HDMI Input Terminal (with DVI-to-HDMI cable or adapter), and connect the Audio
cable to the Audio In jacks.
With HDMI-HDMI cable: HDMI Input Terminal [9]
With HDMI-DVI cable:
• VIDEO: HDMI Input Terminal [9]
• AUDIO: DVI Audio Input [4]
DVI-to-HDMI cable
Audio cable
HDMI cable
DVI-to-HDMI adapter
Audio (L/R) with Mini-Pin
Audio cable (L/R)
Computer connection
Connect the VGA cable and audio cable from the VGA Signal Input and VGA Audio Input
to the corresponding ports on your A/V device.
• VIDEO: VGA Signal Input [6]
• AUDIO: VGA Audio Input [5]
ViewSonic
16
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the LED TV
Cable System or VHF/UHF Antenna System
Enjoy the high-definition and standard-definition digital programming along with standard
definition analog programming.
• This TV is capable of receiving unscrambled digital programming for both cable and
external VHF/UHF antenna.
• We strongly recommend that you connect the antenna/cable input using a 75-ohm
coaxial cable (not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear of TV VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming as shown below.
Cable
Rear of TV VHF/
UHF/CABLE
input
Antenna
ViewSonic
17
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
HD Cable Box/HD Satellite Box
You can also enjoy high-definition programming by subscribing to a high-definition cable
service or a high-definition satellite service. For the optimum picture quality, be sure to
connect this device to your TV via the HDMI on the back of your LED TV.
HDMI Connection
HD cable box/
HD satellite box
Rear of TV
COMPONENT
VIDEO OUT
LINE OUT
R
DVI-HDTV OUT
HDMI OUT
IN
Pr
Y
L
AUDIO
VIDEO
OUT
Pb
Cable TV line /
Antenna cable
HDMI cable
DVI Connection
HD cable box/
HD satellite box
Rear of TV
COMPONENT
VIDEO OUT
LINE OUT
R
DVI-HDTV OUT
IN
Pr
Y
L
AUDO
VIDEO
HDMI OUT
OUT
Pb
Cable TV line /
Antenna cable
Audio cable
DVI-to-HDMI cable
Composite Connection
Rear of TV
HD cable box/
HD satellite box
COMPONENT
VIDEO OUT
LINE OUT
R
DVI-HDTV OUT
IN
Pr
Y
L
AUDIO
VIDEO
HDMI OUT
OUT
Pb
Cable TV line /
Antenna cable
Composite AV cable
• If the equipment has a DVI jack rather than an HDMI jack, connect the DVI jack to the
HDMI jack [9] and connect the audio jack to the AUDIO In jacks of HDMI [4].
ViewSonic
18
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Personal Computer
Use the LED TV as the monitor of your computer.
The picture below shows the connection for PC. The LED TV can also be connected to PC
with DVI or HDMI output.
Connect to an HDMI
compatible PC with
the HDMI cable
Rear of TV
Audio cable
VGA 15 Pin cable
• Connect the VGA Signal In jack to the PC using a 15-pin cable.
• Connect the VGA Audio In jack to the PC using an audio cable.
• If the PC is connected to the TV and no signal has been input from PC for more than 5
seconds, the TV will enter standby mode automatically.
PC Timing Reference Chart
Compatibility Table
Standard
DOS
Resolution
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 75Hz
1360 x 768 @60Hz
Composite
SVHS
No
YPbPr
No
RGB
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
HDMI
Yes
No
No
No
No
No
No
No
No
No
VESA
VESA
VESA
VESA
MAC
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
VESA
VESA
VESA
No
No
Yes
No
No
Yes
No
No
Yes
ViewSonic
19
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Other Equipments
Home
Speakers
Theater
PC
VHF/UHF
Cable
*PC
DVD Player/
VCD Player/
Game System
Digital
Satellite Receiver
Blu-ray Disc
Player/PS3
Digital
Cable Box
PC
Audio
System
DVD
Player
*Note: For DVI connection please use DVI-to-HDMI cable/adapter.
ViewSonic
20
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery
compartment.
3. Reattach the battery cover.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose a
risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may
result in leakage, which may pose a risk of fire or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the
batteries.
ViewSonic
21
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Remote Control and TV Controls
2
3
4
5
6
7
1
Button
Description
Press to turn the power on from standby
1
POWER mode. Press again to return to the
1
standby mode.
FAV1
TV
FAV2
HDMI
FAV3
YPbPr
MTS
2
3
5
7
2
3
FAV 1-3
TV
Press to switch to favorite channels.
4
6
AV
CC
Press to switch to TV source when in
any other source.
8
9
Press to toggle among HDMI1, HDMI2,
and VGA modes.
4
HDMI
LAST
10
11
5
6
7
YPbPr
AV
Not supported.
INFO.
MUTE
Press to switch to AV mode.
Press to turn Closed Captions on/off.
SOURCE
EXIT
CC
ENTER
Press to toggle the MTS (Multichannel
Television Sound) options if available.
8
9
MTS
GUIDE
SLEEP
MENU
PICTURE
WIDE SOUND
Use to key in the channel number. See
more details.
Channel
keys
10
11
LAST
INFO
Press to return to the previous channel.
Press to display the input source or
channel information as well as the
system date and time.
ViewSonic
22
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
12
+ CH -
Press to change the channels in sequence.
Press to adjust the volume.
13
+ VOL -
Press to turn off the sound. To restore the
sound, press this button again, or press
the + VOL - button.
14
MUTE
Press to display the INPUT source list
and select the source with
buttons. To confirm the selection, press
/
15 SOURCE
ENTER.
FAV1
TV
FAV2
HDMI
FAV3
YPbPr
MTS
16
17
EXIT
Press to exit the present menu.
AV
CC
Press these buttons to navigate the OSD
menus.
/
/
is for function select, and
is for function adjustment.
Press to confirm the selection in the
OSD menu, or to enter the OSD menu
you select. Pressing ENTER after you
input channel numbers will change
channels immediately.
LAST
18
ENTER
INFO.
MUTE
12
15
13
14
16
SOURCE
EXIT
Press to display the Electronic Program
Guide (EPG). It contains the program
information for the channel you are
watching.
17
ENTER
18
20
19
20
GUIDE
MENU
GUIDE
SLEEP
MENU
19
PICTURE
WIDE SOUND
21
23
22
24
Press to turn the OSD (On-Screen
Display) menu on.
Press repeatedly to set the off timer. The
function is used to automatically shut off
the LED TV after a preset period of
time. Options are: OFF, 15 min, 30 min,
45 min, 60 min, 75 min, 90 min, 105
min, and 120 min.
21
SLEEP
22 PICTURE Press to toggle the picture mode.
23
24
WIDE
Press to toggle the aspect ratio.
Press to toggle the audio preset.
SOUND
How to Set the Favorite Channel
Three Favorite Channels can be set for quick access. This favorite channel function can
support both analog (NTSC) and digital (ATSC) TV.
1. Switch to the channel number that you want to set as a favorite channel.
2. Press FAV1, FAV2, or FAV3 on the remote control and hold for more than 3 seconds.
ViewSonic
23
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
3. A Channel Saved message appears on the screen to indicate the current channel is saved as
the favorite channel.
How to Select the Favorite Channel
Press FAV1, FAV2, or FAV3 on the remote control to switch to the pre-stored channel number.
Operation
Turning the TV On and Off
FAV1
F
FAV3
Press the POWER button on the remote control. You can also use the
Power button on the front of the panel.
Changing Channels
Using the Channel Button
INFO.
Change channels using the + CH - button, and the TV changes
channels in sequence. You will see all channels that have been
memorized. Channels erased or not memorized will not be shown.
Using the Channel Keys
Switch to the desired channel using the channel keys (0-9 and “-”).
• To select 1, 2 or 3-digit channel number, e.g. Channel 110, press 1
1
0.
• To select 4-digit channel number, e.g. Channel 23-1, press 2
3
-
1.
Adjusting the Volume
• Press + VOL - to adjust the volume.
INFO.
MUTE
• Press MUTE to turn off the volume.
• To restore the volume, press MUTE again, or press +VOL-
SO
EX
directly.
Viewing the Source Information
To display the information of the current input source:
INFO.
MUTE
Press INFO, the input source or channel information, as well as the
system date and time are displayed on the screen.
SOURCE
EXIT
ViewSonic
24
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Customizing the Picture Settings
Allows you to make adjustments to your picture settings.
1. Press MENU on the remote control to display the Main menu and use
to select Picture.
2. Press ENTER to display the Picture menu.
3. Use
4. Use
to highlight an individual Picture option, then press ENTER to confirm.
to change the setting, then press MENU to exit.
Brightness
The Picture menu includes the following options:
Brightness
Contrast
Controls the overall brightness of the picture.
Controls the difference between the brightest and darkest regions
of the picture.
Increase this setting to see crisp edges in the picture; decrease it for
soft edges.
Sharpness
Selects the picture mode. Five modes are available: Showroom,
Movie, Game, Sports, and Custom.
Picture Mode
Color
Controls the overall color of the picture.
Controls the difference between the green and red regions of the
picture.
Tint
Changes the backlight of the TV set. Three modes are available:
Dark Room, Medium Room, and Bright Room.
Backlight
Adjusts the color temperature to achieve a warm or cool effect:
Warm: Increases warm effect.
Neutral: Panel native temperature.
Color Temperature
Memory Recall
Cool: Increases cool effect.
Resets all Picture settings.
ViewSonic
26
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Customizing the Audio Settings
Allows you to make adjustments to your audio settings.
1. Press MENU on the remote control to display the Main menu and use
to select Audio.
2. Press ENTER to display the Audio menu.
3. Use
4. Use
to highlight an individual Audio option, then press ENTER to confirm.
to change the setting, then press MENU to exit.
SRS
Bass
The Audio menu includes the following options:
Bass
Controls the relative intensity of low-pitched sounds.
Treble
Controls the relative intensity of high-pitched sounds.
Adjusts the relative volume of the speakers in a multiple speaker
system.
Balance
TV Speaker
Audio Presets
SRS
Turns the TV speaker on or off.
Allows selection of an audio-enhancement technique from the
following options: Rock, POP, Classical, Flat and Custom.
Turns the SRS TruSurround HD on or off.
Turns off video and gives out audio only. Press any key to show
video.
Audio Only
Memory Recall
Resets all audio settings.
ViewSonic
27
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Customizing the View Mode Settings
Allows you to customize the view mode settings.
1. Press MENU on the remote control to display the Main menu and use
to select
View Mode.
2. Press ENTER to display the View Mode menu.
3. Use
to highlight an individual View Mode option, then press ENTER to confirm. The
view mode changes immediately.
View Mode
1 : 1
FULL
Normal
4. Press MENU to exit.
In non-VGA modes, the View Mode menu includes the following options:
Normal
Full
Keeps the source display ratio.
Enlarges the standard 4:3 source video to the 16:9 full screen video.
When the source video is 16:9 in ratio, no change will occur.
Enlarges the original picture horizontally and vertically to an equal
aspect ratio that fills the screen. The redundant part of the upper,
bottom, left and right of the image will be removed.
Overscan
No Scale
Displays the 1:1 size of the original content.
In VGA mode, the View Mode menu includes the following options:
Selects the aspect ratio of the display. Three options are available:
No Scale, Normal, and Full.
Aspect Ratio
H. Position
V. Position
Fine Tune
Auto Sync
Adjusts the horizontal position of the display.
Adjusts the vertical position of the display.
Use to fine tune the display.
Synchronizes the display automatically.
ViewSonic
28
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Customizing the TV Program Settings
Allows you to make adjustments to your TV Program settings.
NOTE: The TV Program menu is available only when the input source is set to TV. To switch
1. Press MENU on the remote control to display the Main menu and use
to select
TV Program.
2. Press ENTER to display the TV Program menu.
Skip List
3. Use
to highlight an individual TV Program option, then press ENTER to confirm.
4. Adjust the settings on the Submenu, then press MENU to exit.
The TV Program menu includes the following options:
1. Select Skip List from the TV Program menu and press
ENTER. The Channel Skip List menu appears:
Channel Skip List
Clear List
2.0
3.0
4.1
5.0
6.0
Skip List
7.0
Skip List
8.0
9.0
:Select
Enter: Confirm
Menu: Exit
2. Press
to select the desired channel and press ENTER
repeatedly to add or clear the channel from the favorite list.
ViewSonic
29
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Allows you to assign a name to a channel.
1. Select Channel Edit from the TV Program menu and press
ENTER. The Channel Name Edit menu appears.
Channel Name Edit
2.0
3.0
4.1
5.0
6.0
7.0
Channeel Edit
8.0
9.0
:Select
Enter: Confirm
Menu: Exit
Channel Edit
2. Press
to select the desired channel and press ENTER to
enter the Name Edit screen.
3. Use
to move the cursor to the symbol you want
to enter and press ENTER to confirm.
•Select Shift to toggle different symbol tables: uppercase and
lowercase letters, numerals, and special symbols.
•Select Back to backspace.
•Select Clear to delete all typed text.
4. Select Accept when finished.
5. Repeat steps 2-4 to edit more channels.
Allows you to control the audio quality or to enjoy a second audio
program.
•Mono
Allows mono output. It’s useful when stereo is noisy or
inconsistent.
MTS
•Stereo
Use separate audio tracks for left and right speakers, if
available.
•SAP
You can enjoy a second audio program from the speakers
while watching a scene in the original program.
Automatically creates a list of receivable channels for the source
you select:
•Cable
Choose this setting if you are receiving TV channels with a
CATV (cable TV).
Auto Search
•AIR
Choose this setting if you are receiving TV channels with an
antenna (over the air).
Select the TV source then press ENTER to start auto search.
ViewSonic
30
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Allows you to add channels manually.
1. Select Manual Add from the TV Program menu and press
ENTER. The Channel Add screen appears:
Channel Add
_
Enter
Manual Add
Manual Add
:Select
Enter: Confirm
Menu: Exit
2. Use the channel keys (0-9 and “-”) to enter the channel
number, select Enter on the screen to start search.
3. When the channel is found, select Add to add the channel,
or select Skip to cancel.
ViewSonic
31
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Allows the user to reset all settings and restore defaults.
1. Select Reset All from the Setup menu and press ENTER.
2. Enter the 6 digit password to use the Reset All function. The
factory default is 999999.
Enter Password
Reset All
Version
~
0
9: Key in password
Enter: Confirm
Menu: Exit
3. Press ENTER to confirm.
Press ENTER to view the LED TV’s serial number and firmware
version.
ViewSonic
35
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Customizing the Parental Control Settings
1. Press MENU on the remote control to display the Main menu, and use
to select
Settings.
2. Use
to highlight Parental Control, then press ENTER.
3. Enter the 6 digit password to access the Parental Control function. The default is 999999.
4. The Parental Control menu appears.
?
TV-Y (TV RRating)
5. Select an individual Parental Control option, and press ENTER to display the submenu.
6. Adjust the settings on the submenu.
The Parental Control menu includes the following options:
Select ON/OFF to activate/deactivate the access control of
programs according to their rating.
Rating
Block Unrated
Select ON/OFF to block/unlock all unrated programs.
Select to manage programs using the US TV Rating system.
1. Use
to select the main rating and press ENTER to
display the sub-rating screen.
2. Use
to select the desired sub-rating and press ENTER
to toggle between BLOCK and UNBLOCK.
TV Rating
Automatic Blocking:
If the user chooses to block programming according to its age
based rating level, the receiver must have the ability to
automatically block programs with a more restrictive age based
rating. For example, if all shows with an age-based rating of
TV-PG have been selected for blocking, the user should be able to
automatically block programs with the more restrictive ratings of
TV-14 and TV-MA.
ViewSonic
36
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
TV RATING
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
FV
DESCRIPTION
All children
For children age 7 and older
General Audience
Parental Guidance suggested
Parents strongly cautioned
Mature Audience only
Fantasy violence
D
Suggestive dialogue
Strong language
L
S
Sexual situations
V
Violence
ALL
All contents are blocked
Select to manage programs using the
US Movie Rating system.
MPAA (MPAA Rating)
G
Use
to select the rating
PG
PG-13
R
you want and press ENTER to toggle
between BLOCK and UNBLOCK.
MPAA Rating
NC-17
X
:Select
Enter: Confirm
Menu: Exit
MPAA RATING
G
DESCRIPTION
General Audiences. Movie is appropriate for all ages.
Parental Guidance Suggested. May contain material not suited for
younger viewers.
PG
Contains content that may not be appropriate for viewers under the
age of 13.
PG-13
R
Restricted. Contains adult content, no one under 17 admitted
without parent.
NC-17
X
No one 17 and under admitted
Adult programming
ViewSonic
37
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
Select to manage program using the
Canada English Rating system.
Use to select the rating
you want and press ENTER to
toggle between BLOCK and
UNBLOCK.
Canada English
Rating
MPAA RATING
DESCRIPTION
E
Exempt shows
C
Children ages of 2 to 7 years
Children 8 years and older
General programming
Parental Guidance
C8+
G
PG
14+
18+
Viewers 14 and older
Adult programming
Select to manage programs using
the Canada French Rating system.
Use
to select the rating
you want and press ENTER to
toggle between BLOCK and
UNBLOCK.
Canada French
Rating
MPAA RATING
DESCRIPTION
E
Exempt shows
G
General programming
8 ans+
13 ans+
16 ans+
18 ans+
Not recommended for ages under 8
Not recommended for ages under 13
Not recommended for ages under 16
Programming restricted to adults
ViewSonic
38
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Features
V2.0 (Open V-Chip) V-Chip 2.0 enabled.
Allows you to block individual channels.
1. Press to select the desired channel.
Channel Block
2. Press ENTER to toggle between BLOCK and
UNBLOCK.
Select to change the password.
1. Select Change Password from the Parental Control menu
and press ENTER.
2. The Enter Password screen appears.
Change Password
3. Use 0-9 to enter your current password and press ENTER.
4. Use 0-9 to enter the new password and press ENTER.
5. Use 0-9 to enter the new password again for confirmation
then press ENTER.
ViewSonic
39
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Cleaning the LED TV
• Make sure the LED TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other
particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
®
ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the
LED TV screen or case. Some chemical cleaners have been reported to damage the screen
and/or case of the LED TV. ViewSonic will not be liable for damage resulting from use of
any ammonia or alcohol-based cleaners.
ViewSonic
40
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
Please contact ViewSonic service team directly if you have questions, service needs, or
require technical assistance related on the use of your television.
Contact ViewSonic Service Team at:
Or call our service team:
United States 1-800-688-6688
Canada 1-866-463-4775
Problem
Possible Solution
• Make sure the AC adapter is properly
connected to the DC IN of the LED TV.
• Make sure the AC adapter is properly
connected to the wall outlet.
No power
• Make sure the DC power button is ON (Blue
LED).
• Plug another electrical device (like a radio) to
the power outlet to verify that the outlet is
supplying the proper voltage.
• The TV station may be experiencing
problems. Try another channel.
• The Cable TV signal may be scrambled or
encoded. Please contact your local cable
operator.
• Make sure that connections to other
components are correct referring to the user
guide.
No picture
• Make sure that setup has been done correctly
after connections.
• Make sure the correct input source is selected
and the input signal is compatible.
• Ensure that the video cable is securely
connected.
• The picture may appear dim in a brightly lit
room.
• Adjust brightness, contrast, saturation (color),
and tint referring to the user guide.
• Check the input signal setting.
Strange color, light color, or color
misalignment
• External influences such as lightning or static
electricity may cause improper operation. In
this case, operate the unit after first turning on
the power of the LED TV and the AVC
System, or unplug the AC adapter for 1 to 2
minutes, then plug in again.
Unit cannot be operated
ViewSonic
41
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Problem
Possible Solution
• Check your audio connections are properly
connected referring to the user guide.
• The MUTE button may have been pressed, try
pressing this button again.
• Check your audio settings, your TV audio
may be set to minimum.
No sound
• Press the Volume + (Up) button on the remote
control.
• Make sure the directions of batteries are
inserted correctly referring to the user guide.
• Batteries could be weak or dead. Replace with
new batteries.
• Is a fluorescent light illuminated near the
remote control sensor?
• The path of the remote control beam may be
blocked. Make sure the path is clear and that
the remote control is aimed at the remote
control sensor on the TV.
Remote control unit does not operate
• Press the POWER button on the remote
control to see if you can turn on the TV.
• Press MENU button on the remote control to
see if there is a MENU shown on the screen.
• Press only one button at a time and it is the
correct one for the operation you want to
perform.
• Is the image positioned correctly?
• Are screen mode adjustments such as picture
size set correctly?
• Press WIDE button repeatedly on the remote
control to see if you can get the picture you
prefer.
Picture is cut off/with sidebar screen
Power is cut off suddenly
• Is the sleep timer set in advance?
• Is there no signal in PC mode or HDMI
mode?
• The internal temperature of the unit has
increased. Remove any objects blocking the
vent or clean as necessary.
• Is the AIR/CABLE option set correctly?
Please set the AIR/CABLE option to CABLE
referring to the user guide.
No CATV reception (or no reception
above CH13)
• CATV is connected improperly or not
connected; please check all the CATV
connections.
• The cable TV service is interrupted; please
contact your cable operator.
ViewSonic
42
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Type
19” HD
Active Matrix RGB
0.3 (H) x 0.3 (V) mm pixel
LCD
RGB vertical stripe
Anti-Glare
Color Filter
Glass surface
1366 x 768
Native Resolution
RGB
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-80 kHz, fv:50-75 Hz
RF
Video
TV system Antenna/ NTSC+ATSC,
TV cable system/CATV+Digital cable
1 Composite RCA, 2 HDMI, 1 VGA
Input signal
1 mini-stereo
2 pair of RCA (L/R) stereo
Audio
PC
640 x 480 @ 60Hz/75Hz
800 x 600 @ 60Hz/75Hz
1024 x 768 @ 60Hz/75Hz
1360 x 768 @ 60Hz
Compatibility
NTSC
Recommended and supported
(AV Mode)
Resolution Table
480i/p @ 60Hz
720p @ 60 Hz
1080i @ 60Hz
Recommended and supported
(HDMI Mode)
3W x 2 @ THD=10%
1 SPIDF
Speaker output
Audio output
Power
100-240 V, 50/60 Hz
Voltage
415 mm (H) x 235 mm (V)
16.39” (H) x 9.25” (V)
Display area
Full Scan
32°F to + 104°F (0°C to + 40°C)
10% to 85% (no condensation)
To 10,000 feet (3,000m)
Temperature
Humidity
Altitude
Operating conditions
-4°F to + 140°F (-20°C to + 60°C)
5% to 90% (no condensation)
To 40,000 feet (12,000m)
Temperature
Humidity
Altitude
Storage condition
443.365mm x 351.497mm x 126.155mm
17.46" x 13.84" x 4.97"
Physical
(W) x (H) x (D)
Dimensions
Weight
2.656 kg (1.21 lb)
Net
UL/cUL, FCC-B (Doc-B), BETS-7,
Regulations
®
ENERGY STAR , CEC, HDMI
Max. 75 W (blue LED)
On
Power consumption
< 1 W at 110 Vac only (orange LED)
Standby
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent
damage to the LED TV.
Note: Product Specifications are subject to change without notice.
ViewSonic
43
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Limited Warranty
®
VIEWSONIC LED TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product
proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a
like product. Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic LED TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first cus-
tomer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an
extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your product’s serial
number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of
the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, expressed or implied, which extend beyond the description contained herein including the implied warranty of merchant-
ability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss
of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of
the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limita-
tions on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may
not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic
dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the
Maintenance Guarantee Card.
4.3: ViewSonic LED TV Warranty
LTV_LW01 Rev. 1C 10-28-08
ViewSonic
44
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Mexico Limited Warranty
®
VIEWSONIC LED TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product
proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with
a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
ViewSonic LED TVs are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the first customer pur-
chase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized attempted repair,
or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an
extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support
page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your pur-
chase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name: __________________ Model Number:______________________
Document Number: ______________ Serial Number: ______________________
Purchase Date: ___________ Extended Warranty Purchase? ____________(Y/N)
If so, what date does warranty expire? ______________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of
the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, expressed or implied, which extend beyond the description contained herein including the implied warranty of merchant-
ability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss
of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of
the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
45
VT1900LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
