®
ViewSonic
E50/E50B
CRT Monitor
- User Guide
- Guide de l’utilisateur
- Guía del usuario
- Guia do usuário
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found on
RXUꢀZHEꢀVLWHꢀDWꢀKWWSꢁꢂꢂZZZꢃYLHZVRQLFꢃFRPꢀLQꢀ(QJOLVKꢄꢀRUꢀLQꢀVSHFL¿FꢀODQJXDJHVꢀXVLQJꢀ
the Regional selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
®
ViewSonic
Model No. : VS11145
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
For Canada
•
•
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to
“Safety.”
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.
ViewSonic
E50/E50B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in
this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
GHYLFHVꢀꢁLQFOXGLQJꢀDPSOL¿HUVꢂꢀWKDWꢀSURGXFHꢀKHDWꢃ
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
SURYLGHGꢀIRUꢀ\RXUꢀVDIHW\ꢃꢀ,IꢀWKHꢀSOXJꢀGRHVꢀQRWꢀ¿WꢀLQWRꢀ\RXUꢀRXWOHWꢄꢀFRQVXOWꢀDQꢀHOHFWULFLDQꢀIRUꢀ
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. ꢀꢀ2QO\ꢀXVHꢀDWWDFKPHQWVꢅDFFHVVRULHVꢀVSHFL¿HGꢀE\ꢀWKHꢀPDQXIDFWXUHUꢃ
Use only with a cart, stand, tripod, bracket, or table specified by the
12.
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. ꢀꢀ5HIHUꢀDOOꢀVHUYLFLQJꢀWRꢀTXDOL¿HGꢀVHUYLFHꢀSHUVRQQHOꢃꢀ6HUYLFHꢀLVꢀUHTXLUHGꢀZKHQꢀWKHꢀXQLWꢀKDVꢀ
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
ViewSonic
E50/E50B
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC
of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr )
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
ꢆꢃꢀꢀ0HUFXU\ꢀLQꢀFRPSDFWꢀÀXRUHVFHQWꢀODPSVꢀQRWꢀH[FHHGLQJꢀꢇꢀPJꢀSHUꢀODPSꢀDQGꢀLQꢀRWKHUꢀODPSVꢀQRWꢀ
VSHFL¿FDOO\ꢀPHQWLRQHGꢀLQꢀWKHꢀ$QQH[ꢀRIꢀ5R+6ꢀ'LUHFWLYHꢃ
ꢈꢃꢀꢀ/HDGꢀLQꢀJODVVꢀRIꢀFDWKRGHꢀUD\ꢀWXEHVꢄꢀHOHFWURQLFꢀFRPSRQHQWVꢄꢀÀXRUHVFHQWꢀWXEHVꢄꢀDQGꢀHOHFWURQLFꢀ
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic
E50/E50B
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2007. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration
form, which you may mail or fax to ViewSonic®.
For Your Records
Product Name:
Model Number:
E50/E50B
ViewSonic 15” CRT Monitor
VS11145
Document Number: E50/E50B-8_UG_ENG Rev. 1A 06-28-07
Serial Number:
Purchase Date:
__________________________________________
__________________________________________
Product disposal at end of product life
The lamp in this produc contains mercury. Please dispose of in accordance with local, state or
federal laws.
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life.
ViewSonic
E50/E50B
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Congratulations on your purchase of a ViewSonic® color monitor.
Important! Save the original box and all packing material for future shipping needs.
Note : The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows 95, Windows NT, Windows 98, Windows 2000, Windows ME
(Millennium), and Windows XP.
Package Contents
Your package includes:
• Color monitor
• DB-15 video cable
• Power cord
• ViewSonic® CD-ROM Wizard
• Quick Start Guide
Note ꢉꢀ7KHꢀ&'ꢀLQFOXGHVꢀWKHꢀ8VHUꢀ*XLGHꢀ3')ꢀ¿OHVꢀDQGꢀ,1)ꢅ,&0ꢀGLVSOD\ꢀRSWLPL]DWLRQꢀ¿OHVꢃꢀ
7KHꢀ,1)ꢀ¿OHꢀHQVXUHVꢀFRPSDWLELOLW\ꢀZLWKꢀ:LQGRZVꢀRSHUDWLQJꢀV\VWHPVꢄꢀDQGꢀWKHꢀ,&0ꢀ¿OHꢀꢁ,PDJHꢀ
Color Matching) ensures accurate on-screen colors. ViewSonic® recommends that you install
ERWKꢀ¿OHVꢃ
Precautions
•
For best viewing conditions sit at least
18” from the monitor.
•
Place your monitor in a well ventilated
area. Do not place anything on the
monitor that prevents adequate
dissipation of heat.
•
Avoid touching the screen with your
fingers. Oils from the skin are difficult
to remove.
•
•
Ensure the area around the monitor is
clean and free of moisture.
•
•
Never remove the rear cover. The
monitor contains high voltage parts. You
may suffer serious injury if you touch
these parts.
Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
Avoid exposing the monitor to direct
sunlight or another heat source,
including an open flame. The monitor
should be facing away from direct
sunlight to reduce glare.
•
•
Do not place heavy objects on the
monitor, video cable, or power cord.
If smoke, on abnormal noise, or a
strange odor is present, immediately
switch the monitor off and call your
dealer or ViewSonic®. It is dangerous to
continue using the monitor.
•
Always handle your monitor with care
when moving it.
ViewSonic
E50/E50B
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Installation
1. Connect power cord
CD-ROM drive, see “Customer Support”
on page 14.
Connect the power cord to a properly
grounded AC outlet.
Wait for the CD-ROM to auto-start.
Note : If the CD-ROM does not auto-
start:
2. Connect video cable
• Make sure both the monitor and
computer are turned OFF.
double-click on the CD-ROM icon in
Windows Explorer, and then double-
click on viewsonic.exe.
• Connect the video cable to the
computer.
Follow the on-screen instructions.
Macintosh® users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug
the video cable into the adapter.
To order a ViewSonic® Macintosh
adapter, contact ViewSonic.
5. Windows users: Set the Timing Mode
ꢀUHVROXWLRQꢁDQGꢁUHIUHVKꢁUDWHꢂ
Example: 800 x 600 @ 85Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card’s user guide.
See “Customer Support” on page 14.
3. Turn ON monitor and computer
Installation is complete. Enjoy your
new ViewSonic® color monitor.
Turn ON the monitor, then turn ON
the computer. This sequence (monitor
before computer) is very important.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 4. (See
back of monitor.)
Note : At this point Windows users
may receive a message asking them to
LQVWDOOꢀWKHꢀ,1)ꢀ¿OHꢃ
To register your product go online to
4. Install Display Optimization files
ꢀ,1)ꢁDQGꢁ,&0ꢁ¿OHVꢂ
The ViewSonic® Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic®.
Insert the ViewSonic® Wizard CD-
ROM into your computer’s CD-ROM
drive.
Note : If your computer does not have a
Power cord
Video cable
AC wall outlet
ViewSonic
E50/E50B
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 800 x 600) and
refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the
OSD (On Screen Display) controls to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 800 x 600 @ 85 Hz.
To set the Timing Mode:
1. Set the resolution:Right-click on the Windows desktop > Properties > Settings > set the
resolution.
2. Set the refresh rate:See your graphic card’s user guide for instructions.
Note : The refresh rate should already be set if you have done the CD installation (or refer to
your graphics card documentation).
ViewSonic
E50/E50B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OSD controls. The OSD
FRQWUROVꢀDUHꢀH[SODLQHGꢀDWꢀWKHꢀWRSꢀRIꢀWKHꢀQH[WꢀSDJHꢀDQGꢀDUHꢀGH¿QHGꢀLQꢀ³0DLQꢀ0HQXꢀ&RQWUROV´ꢀRQꢀ
page 10.
MAIN MENU (1)
Main Menu
CONTRAST/BRIGHTNES
H. POSITION/SIZE
V. POSITION/SIZE
With OSD controls
PINCUSHION/PIN BALANCE
TRAPEZOID/PARALLEL
TOP/BOTTOM HOOK
ZOOM
TILT
SELECT :
/
EXIT :MENU
Front Control Panel
shown below in detail
• Scrolls through menu options.
• Also toggles between two controls on some screens.
Displays the Main Menu or exits the
control screen and saves adjustments.
• Displays the control screen for the
highlighted control.
• Adjusts the displayed control.
Power LED
Green = ON
Green=Flicking
Power
On/Off
ViewSonic
E50/E50B
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
•
OSD Lock : Press and hold the “MENU” button on the face of the monitor for 10
VHFRQGVꢃꢀ7KHꢀPHVVDJHꢀ³26'ꢀ/2&.´ꢀZLOOꢀWKHQꢀGLVSOD\ꢀEULHÀ\ꢄꢀLQGLFDWLQJꢀWKDWꢀWKHꢀ26'ꢀ
image settings are now locked.
•
OSD Unlock : Press and hold the “MENU” button again for 10 seconds. The message
³26'ꢀ81/2&.´ꢀZLOOꢀWKHQꢀGLVSOD\ꢀEULHÀ\ꢄꢀLQGLFDWLQJꢀWKDWꢀWKHꢀ26'ꢀimage settings are
now unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, and select “MENU”.
MAIN MENU (1)
MAIN MENU (2)
CONTRAST/BRIGHTNES
DEGAUSS
H. POSITION/SIZE
V. POSITION/SIZE
PINCUSHION/PIN BALANCE
TRAPEZOID/PARALLEL
TOP/BOTTOM HOOK
ZOOM
MOIRE REDUCTION
OSD POSITION
LANGUAGE
VIEWMATCH COLOR
VIEWMETER
MEMORY RECALL
TILT
SELECT :
/
SELECT :
/
EXIT :MENU
EXIT :MENU
2. To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
SUHVVꢀEXWWRQꢀŻꢅŹꢃ
Note : Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
'LVSOD\ꢀFRQWUROꢀVFUHHQꢀꢁVDPSOHꢀVKRZQꢀLQꢀVWHSꢀꢊꢀEHORZꢂꢃꢀ3UHVVꢀEXWWRQꢀźꢅŸꢀWRꢀWRJJOHꢀWRꢀ
the next control in the pair.
3. To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
CONTRAST
EXIT : MENU
BRIGHTNESS :
4. To save the adjustment and exit the menu press button “MENU” twice.
ViewSonic
E50/E50B
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
Control
Explanation
__________________________________________________________________________________
Contrast adjusts the difference between the image background
(black level) and the foreground (white level).
Brightness adjusts the background black level of the screen
image.
Zoom expands and contracts the entire screen image.
Horizontal Position moves the screen image left or right.
Horizontal Size adjusts the width of the screen image.
Vertical Position moves the screen image up or down.
Vertical Size adjusts the height of the screen image.
Pincushion curves the vertical sides of the screen image.
Pin Balance curves the vertical edges of the screen image to the
left or right.
Trapezoid adjusts the top and bottom of the screen image until
they have equal length.
Parallel slants the vertical edges of the screen image until they are
parallel.
OSD Position allows you to move the on-screen display menus
and control screens.
Tilt rotates the entire screen image.
Memory Recall returns adjustments to the original factory settings
if the display is operating in a factory preset timing mode listed in
this user guide.
Exception: This control does not affect changes made with the
User Color control.
ViewSonic
E50/E50B
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control
Explanation
__________________________________________________________________________________
DegaussꢀUHPRYHVꢀWKHꢀEXLOGꢋXSꢀRIꢀPDJQHWLFꢀ¿HOGVꢀWKDWꢀFDQꢀFDXVHꢀ
irregular colors to appear around the edges of screen images. There
are two ways to degauss the display:
automatically by turning the monitor on, or manually by selecting
the Degauss control from the menu. With Degauss selected from the
menu, press button [2] to degauss the monitor manually.
Important: Do not degauss repeatedly. Doing so can be harmful
to the display. Wait at least 20 minutes before selecting this control
again.
ViewMatch® Color provides several color options: several preset
color temperatures and User Color which allows you to adjust red
(R), green (G), and blue (B). The factory setting for this product is
9300K (9300° Kelvin).
9300K — Adds blue to the screen image for cooler white (used in
PRVWꢀRI¿FHꢀVHWWLQJVꢀZLWKꢀÀXRUHVFHQWꢀOLJKWLQJꢂꢃ
6500K — Adds red to the screen image for warmer white and
richer red.
User Color— Individual adjustments for red, green, and blue.
Language allows you to choose language in the menus and control
screens.
Moire reduces interference patterns that appear as ripples, waves,
or unwanted background color textures. Interference patterns of
this type are most noticeable when viewing images having closely
VSDFHGꢀOLQHVꢀRUꢀ¿QHO\ꢀGHWDLOHGꢀSDWWHUQVꢃ
ViewMeter displays the frequencies (horizontal and vertical)
coming from the graphics card of the computer.
Top Hook adjusts the top corners of the screen image.
Bottom Hook adjusts the bottom corners of the screen image.
ViewSonic
E50/E50B
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
6SHFL¿FDWLRQV
15” (13.8” viewable diagonal area). 90OꢀGHÀHFWLRQꢄꢀꢅꢆꢃꢇꢀPPꢀ1HFN
CRT
Type
Dot Pitch
0.24 mm horizontal, 0.14 mm vertical, and 0.28 mm diagonal dot
pitch
RGB, P 22 medium short persistence
Phosphor
Glass surface
70aꢈꢉꢊꢄꢀDQWLꢋJODUHꢄꢀDQWLꢋUHÀHFWLRQꢀDQGꢀDQWLꢋVWDWLVWLF
Input Signal
Compatibility
Resolution
Video
Sync
RGB Analog (0.7/1.0 Vp-p, 75 Ohms)
f :30-54 kHz, f :50-120 Hz
H
v
Separate Sync.
PC
Macintosh1
VGA up to 1024 x 768
Power Macintosh compatible from 640 x 480 to 832 x 624
(may require Macintosh cable adapter)
Recommended and
supported
640 x 480 @ 60, 75, 85 Hz
640 x 400 @ 70 Hz
800x 600 @ 60, 75, 85 Hz
1024 x 768 @ 60 Hz
832 x 624 @ 75 Hz (Mac)
Power
Voltage
AC 100-240 VAC
50/60 Hz
Display Area
Default
270 mm(H) x 202 mm(V)
285 mm(H) x 214 mm(V)
Full scan
32O F to 104O F (0O C to 40O C)
5% to 95% (non-condensing)
To 10,000 feet
Operating
Conditions
Temperature
Humidity
Altitude
-40O F to 140O F (-40O C to 60O C)
5% to 95% (non-condensing)
To 50,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
Dimensions
Physical
(monitor)
360 mm (W) x 379 mm (H) x 389 mm (D)
14.2” (W) x 14.9” (H) x 15.3” (D)
Weight
Net
10.4 kg / 22.9 lb (monitor only)
Regulations
FCC-B, DHHS, CSA/NRTL, CB, TUV/S, NOM, UL, MPR II
Power Consumption On
< 70 W (Green LED)
Modes
Sleep
ꢌꢀꢈꢀ:ꢀꢍ*UHHQꢀÀLFNLQJꢎ
1
.
Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter, contact
Customer Support. You will need to provide the product serial number.
Note : 7KLVꢀSURGXFWꢀZDVꢀGHVLJQHGꢀIRUꢀRSHUDWLRQꢀLQꢀWKHꢀPDJQHWLFꢀ¿HOGVꢀRIꢀWKHꢀKHPLVSKHUHꢀZKHUHꢀLWꢀZDVꢀSXUFKDVHGꢃ
ViewSonic
E50/E50B
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
•
Make sure power button (or switch) is ON.
•
Make sure A/C power cord is securely connected to the back of the monitor and to a
power outlet.
•
Plug another electrical device (like a radio) into the power outlet to verify that the outlet
is supplying proper voltage.
Power is ON but no screen image
•
Make sure the video cable supplied with the monitor is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not attached
permanently to the monitor, tightly secure it to the monitor.
•
•
Adjust brightness and contrast.
Verify whether an adapter is required for proper signal continuity between graphics card
and monitor.
Flickering
•
Not enough power supplied. Connect the monitor to a different outlet. If using a surge
protector, reduce the number of devices plugged in.
•
Check the ViewMeter from the main menu to verify the refresh rate (vertical frequency)
LVꢀꢌꢇꢀ+]ꢀRUꢀKLJKHUꢃꢀ6HHꢀ³6SHFL¿FDWLRQV´ꢀRQꢀSDJHꢀꢆꢈꢃ
‡ꢀꢀ ꢀ5HPRYHꢀDQ\ꢀGHYLFHVꢀIURPꢀWKHꢀDUHDꢀDURXQGꢀWKHꢀPRQLWRUꢀWKDWꢀHPLWꢀPDJQHWLFꢀ¿HOGVꢀVXFKꢀDVꢀ
radios, surge protectors, unshielded speakers, fluorescent lights, AC power converters,
desk fans, etc.
•
Make sure the graphics card in your computer can use non-interlaced mode at the desired
frequencies. To enable your graphics card to support higher refresh rates, try selecting
fewer colors or running lower resolutions.
Wrong or abnormal colors
•
If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection.
•
•
•
Connect the monitor to another computer.
Select Degauss from the Main Menu. Do this only once.
If you have an older graphics card, contact ViewSonic® Customer Support.
Entire screen image rolls vertically
‡ꢀꢀ ꢀ0DNHꢀVXUHꢀYLGHRꢀLQSXWꢀVLJQDOVꢀDUHꢀZLWKLQꢀWKHꢀPRQLWRU¶VꢀVSHFL¿HGꢀIUHTXHQF\ꢀUDQJHꢃ
•
Try the monitor with another power source, graphics card, or computer system.
•
Connect the video cable securely.
Control buttons do not work
Press only one button at a time.
•
ViewSonic
E50/E50B
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
Country/Region
Australia/New Zealand
Canada
Web Site
E-mail
F=Fax
AUS=1800 880 818
NZ=0800 008 822
T= 1-866-463-4775
F= 1-909-468-5814
Europe/Middle East/Baltic
countries/North Africa
Contact your reseller
T= 852 3102 2900
T= 1800 11 9999
T= 080 333 2131
Hong Kong
India
Korea
T= 0800-666-0098
F= 1-909-444-5655
Latin America (Argentina)
Latin America (Brazil)
Latin America (Chile)
Latin America (Columbia)
Latin America (Mexico)
T= 0800-891-1829
F= 1-909-444-5655
T= 800-440303
F= 1-909-444-5655
T= 01800-9-156588
F= 1-909-444-5655
T= 001-866-823-2004
F= 1-909-444-5655
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
T= 0800-53311
Latin America (Peru)
Macau
F= 1-909-444-5655
T= 853 700 303
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-1202
Puerto Rico & Virgin Islands
Singapore/Malaysia/Thailand
South Africa
T= 65 6461 6044
United Kingdom
United States
T= 1-800-688-6688
F= 1-909-468-1202
ViewSonic
E50/E50B
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Monitor
•
•
Make sure the monitor is turned off.
Never spray or pour any liquid directly onto the screen or case.
To clean the screen :
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If further cleaning is required not clean, apply a small amount of non-ammonia, non-
alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case :
1. Use a soft, dry cloth.
2. If further cleaning is required, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the
surface.
Disclaimer :
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the
monitor screen or case. Some chemical cleaners have been reported to damage the screen and/
or case of the monitor.
ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
ViewSonic
E50/E50B
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC® CRT MONITOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its
sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
ViewSonic® Monitor products are warranted for three (3) years for all parts excluding the display tube, and three (3) years for
ODERUꢀIURPꢀWKHꢀGDWHꢀRIꢀWKHꢀ¿UVWꢀFXVWRPHUꢀSXUFKDVHꢃꢀ
Who the warranty protects:
7KLVꢀZDUUDQW\ꢀLVꢀYDOLGꢀRQO\ꢀIRUꢀWKHꢀ¿UVWꢀFRQVXPHUꢀSXUFKDVHUꢃ
What the warranty does not cover:
1.ꢀꢀ ꢀ$Q\ꢀSURGXFWꢀRQꢀZKLFKꢀWKHꢀVHULDOꢀQXPEHUꢀKDVꢀEHHQꢀGHIDFHGꢄꢀPRGL¿HGꢀRUꢀUHPRYHGꢃꢀ
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e.ꢀꢀ ꢀ&DXVHVꢀH[WHUQDOꢀWRꢀWKHꢀSURGXFWꢄꢀVXFKꢀDVꢀHOHFWULFꢀSRZHUꢀÀXFWXDWLRQVꢀRUꢀIDLOXUHꢃ
f.ꢀ ꢀ8VHꢀRIꢀVXSSOLHVꢀRUꢀSDUWVꢀQRWꢀPHHWLQJꢀ9LHZ6RQLF¶VꢀVSHFL¿FDWLRQVꢃ
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer
Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
ZDUUDQW\ꢀRIꢀPHUFKDQWDELOLW\ꢀDQGꢀ¿WQHVVꢀIRUꢀDꢀSDUWLFXODUꢀSXUSRVHꢃꢀ
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
7KLVꢀZDUUDQW\ꢀJLYHVꢀ\RXꢀVSHFL¿FꢀOHJDOꢀULJKWVꢄꢀDQGꢀ\RXꢀPD\ꢀDOVRꢀKDYHꢀRWKHUꢀULJKWVꢀZKLFKꢀYDU\ꢀIURPꢀVWDWHꢀWRꢀVWDWHꢃꢀ6RPHꢀVWDWHVꢀ
do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or
your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms
and conditions of the Maintenance Guarantee Card.
Warranty Information.
4.3: ViewSonic CRT Monitor Warranty
CRT_LW01 Rev. 1C 06-25-07
ViewSonic
E50/E50B
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
VIEWSONIC® CRT MONITOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the
warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include
remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
ViewSonic LCD TVs are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date
RIꢀWKHꢀ¿UVWꢀFXVWRPHUꢀSXUFKDVHꢃꢀ
Who the warranty protects:
7KLVꢀZDUUDQW\ꢀLVꢀYDOLGꢀRQO\ꢀIRUꢀWKHꢀ¿UVWꢀFRQVXPHUꢀSXUFKDVHUꢃ
What the warranty does not cover:
ꢆꢃꢀ $Q\ꢀSURGXFWꢀRQꢀZKLFKꢀWKHꢀVHULDOꢀQXPEHUꢀKDVꢀEHHQꢀGHIDFHGꢄꢀPRGL¿HGꢀRUꢀUHPRYHGꢃ
2. Damage, deterioration or malfunction resulting from:
ꢀ
Dꢃꢀꢀ$FFLGHQWꢄꢀPLVXVHꢄꢀQHJOHFWꢄꢀ¿UHꢄꢀZDWHUꢄꢀOLJKWQLQJꢄꢀRUꢀRWKHUꢀDFWVꢀRIꢀQDWXUHꢄꢀXQDXWKRUL]HGꢀSURGXFWꢀPRGL¿FDWLRQꢄꢀ
unauthorized attempted repair, or failure to follow instructions supplied with the product.
b.Any damage of the product due to shipment.
ꢀ
ꢀ
Fꢃꢀꢀ&DXVHVꢀH[WHUQDOꢀWRꢀWKHꢀSURGXFWꢄꢀVXFKꢀDVꢀHOHFWULFDOꢀSRZHUꢀÀXFWXDWLRQVꢀRUꢀIDLOXUHꢃ
Gꢃꢀ8VHꢀRIꢀVXSSOLHVꢀRUꢀSDUWVꢀQRWꢀPHHWLQJꢀ9LHZ6RQLF¶VꢀVSHFL¿FDWLRQVꢃ
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is
displayed on the product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the
attached Customer Support page). You will need to provide your product’s serial number, so please record the product
information in the space provided below on your purchase for your future use. Please retain your receipt of proof of
purchase to support your warranty claim.
For Your Records
Product Name: _______________________________
Document Number: ___________________________
Purchase Date: _______________________________
Model Number: _______________________________
Serial Number: ________________________________
Extended Warranty Purchase? ________________(Y/N)
If so, what date does warranty expire? ______________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
ZDUUDQW\ꢀRIꢀPHUFKDQWDELOLW\ꢀDQGꢀ¿WQHVVꢀIRUꢀDꢀSDUWLFXODUꢀSXUSRVHꢃ
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
WKHꢀSURGXFWꢄꢀORVVꢀRIꢀWLPHꢄꢀORVVꢀRIꢀSUR¿WVꢄꢀORVVꢀRIꢀEXVLQHVVꢀRSSRUWXQLW\ꢄꢀORVVꢀRIꢀJRRGZLOOꢄꢀLQWHUIHUHQFHꢀZLWKꢀEXVLQHVVꢀ
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
E50/E50B
17
Download from Www.Somanuals.com. All Manuals Search And Download.
&RQWDFWꢁ,QIRUPDWLRQꢁIRUꢁ6DOHVꢁ ꢁ$XWKRUL]HGꢁ6HUYLFHꢁꢀ&HQWURꢁ$XWRUL]DGRꢁGHꢁ6HUYLFLRꢂꢁZLWKLQꢁ0H[LFRꢃ
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
E-Mail: [email protected]
Puebla, Pue. (Matriz):
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
Veracruz, Ver.:
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas
# 419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
Guadalajara, Jal.:
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
ELECTROSER
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Oaxaca, Oax.:
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
STD
FOR USA SUPPORT:
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
CRT_LW03 Rev. 1A 06-25-07
ViewSonic
E50/E50B
18
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic
Download from Www.Somanuals.com. All Manuals Search And Download.
|