VC320
Digital Video Camcorder
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
viewsonic.com in English, or in specific languages using the Regional selection box in
the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”
Model No. VS14315
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or
electric shock, do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the unit in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the unit. Be sure that
the power outlet is located near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution when
moving the cart/unit combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
unit has been damaged in any way, such as: if the power-supply cord or plug is
damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to
rain or moisture, or if the unit does not operate normally or has been dropped.
15. Caution: There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
16. Only use battery packs approved by the manufacturer or else damage may occur.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS Directive)
and is deemed to comply with the maximum concentration values issued by the
European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Lead (Pb)
Actual Concentration
Concentration
0.1%
< 0.1%
< 0.1%
< 0.01%
Mercury (Hg)
0.1%
Cadmium (Cd)
0.01%
Hexavalent Chromium
(Cr )
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.1%
6+
Polybrominated biphenyls
(PBB)
Polybrominated diphenyl
ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of
the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other
lamps not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and
electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight,
aluminium containing up to 0.4% lead by weight and as a cooper alloy containing
up to 4% lead by weight.
Download from Www.Somanuals.coimii. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this document
may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it
com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print
the registration form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
VC320
ViewSonic Digital Video Camcorder
VS14315
VC320_UG_ENG Rev. 1A 07-07-11
_______________________________
_______________________________
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green.
Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic
website to learn more.
Download from Www.Somanuals.coimv. All Manuals Search And Download.
ViewSonic
Digital Video Camcorder
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This Before Using the Camcorder
SAFETY INSTRUCTIONS
• Do not drop, puncture or disassemble the camcorder.
• Use the camcorder with care. Rough handling may damage the internal components.
• Do not expose the camcorder to high temperature. Avoid contact with water.
• Please notice that the camcorder body may become warm when operating it for an extended period.
• Test for proper operation before using the camcorder.
• Only use accessories supplied by the manufacturer.
• Use only the type of battery that came with your camcorder.
• Remove the battery if the camcorder is not going to be used for long periods.
Product Information
• Designs and specifications of the camcorder are subject to change without notice. This includes
primary product specifications, software, and this user’s manual.
• This User’s Manual is a general reference guide for the camcorder.
• The illustrations in this manual may not be the same as the actual design of your camcorder and
those you see on the LCD screen.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Read This Before Using the Camcorder .............................................. 2
Section 1 Getting to Know Your Camcorder..................................... 4
Section 2 Getting Started.................................................................... 7
Section 3 Enjoying the Record Mode................................................ 9
Section 4 Enjoying the Playback Mode........................................... 21
Section 5 Setting Your Camcorder ................................................. 26
Section 6 Viewing Photos and Videos on TV.................................. 30
Section 7 Viewing Video & Photo on PC......................................... 31
Section 8 Uploading Files to Internet.............................................. 32
Section 9 Specifications and System Requirements..................... 35
Section 10 Troubleshooting ............................................................... 37
Section 11 Using Remote Control...................................................... 38
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1
Getting to Know Your Camcorder
Overview
The camcorder equipped a 5 Mega Pixel sensor that can take H.264 format videos. The H.264 technology
allows for extanded video recording with less memory. High quality images up to 16 mega-pixels can
also be delivered smoothly. With a color LCD monitor, you can view and examine the videos and photos
easily.
The camcorder features 3” (16:9) LCD touch panel which is an ideal platform for you to operate your
camcorder. The menu options are accessible with your finger. With the touch panel, you can select the
options directly and quickly.
The camcorder also features video recording at an HD resolution of 1920x1080. You can also connect
it to an HDTV via an HDMI cable, and easily playback the recorded high-definition videos on the wide
screen HDTV.
Moreover, the camcorder has an advanced uploading feature. With the exclusive built-in Internet Direct
application, you can upload the videos captured by the camcorder to the web site more effortlessly .
ISO sensitivity and color balance can either be adjusted automatically or changed manually. A 120x
digital zoom helps you to control over the videos and photos you take.
The varied effect options, such as Time Lapse and Slow Motion, make recording more fun.
The built-in memory allows you to take photos and to record videos without a memory card. The memory
card slot allows users to increase the storage capacity.
Note
• Partial memory of the built-in memory is used for the camcorder’s Firmware code and software.
• Install the bundled software application on the CD, ArcSoft MediaImpression, for viewing the
videos correctly on a PC.
Standard Accessories
Unpack the package and make sure all standard accessories listed are included:
• Camcorder
• USB Cable
• AV Cable
• HDMI Cable
• Remote Control
• Adaptor
• Lithium-ion Rechargeable Battery
• Quick Guide
• CD-ROM (Software, User’s Manual)
• Pouch
• Lens Cover Set (Lens cover and Strap)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View
Tele/Wide Button
Photo Button
Microphone
Flash
Lens
LCD Touch Panel
Self-timer LED
Rear View
Playback LED
Indicator
Record LED
Indicator
TV Port
Video Button
HDMI Port
Mini USB 2.0 Port
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Button
Playback Button
Pause Button
Digital Light Button Stabilization Button
Speaker
Battery/SD card Cover
Tripod Socket
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2
Getting Started
Loading the Battery
Before using the camcorder, you must load the Lithium-ion
rechargeable battery come within the package.
1. Insert the battery according to the correct polarity marks ( + or -).
2. Close the battery cover firmly.
Charge your battery
You must use the supplied AC charger or the USB cable. The camcorder
must be turned OFF. The blinking light confirms the camcorder is currently
charging, and the light becomes constant after the charging is completed. In
AC charging Mode, the light will turn itself off automatically after 3~5 minutes
. The full charge time is about 4 to 5 hours. (Actual charging time may vary. It
depends on the battery conditions.)
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory that allows you to store photos and videos. You can
expand the memory capacity by using an optional SD memory card.
1. Insert the memory card into the slot. Please refer to the figure on
the right side.
2. To remove the installed SD card, press the card inward to release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved to the card rather than the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-only when it is locked. No photos or videos can
be recorded when the SD card is locked. Make sure
the lock is on the writeable position before recording
any media.
Writeable
position
Write-Protected
Position
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Camcorder On
• To turn on the camcorder:
1. Flip out the LCD panel; the camcorder will turn on automatically.
2. Or press [Power Button] for approximately one second to turn it on.
Configuring the Initial Date and Time Setup
• The time setting screen appears to allow you to setup date and time:
Operation
Display Screen
1. Touch Year, Month, Day, Hour, Minute, and AM/PM to set.
2. Adjust the numeric value by touching
/
3. Touch the [OK] icon to validate the setting.
4. Touch the Exit icon (
) to exit.
Getting Started
• To record video: Press [Video Button] to record video. To stop recording, press it again.
• To pause recording: Press [Pause Button] to pause recording. To continue the recording, press it
again.
• To take a photo during video recording: When recording video, press [Photo Button] to capture the
image. The Dual record icon (
) appears on the LCD monitor.
• To take a photo: Press [Photo Button] halfway down until the focusing frame turns from white to green.
Then, press it fully down to take photo.
Focusing Frame: White
Focusing Frame: Green
• To view stored videos and photos: Press [Playback Button] or touch
on the screen to switch to
the Playback mode.
Turning the Camcorder Off
• To turn off the camcorder: You can either press [Power Button] for one second, or you can place the
LCD panel back to its original position.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3
Enjoying the Record Mode
Button Function
Video Button:
1. Press to take video.
2. To stop recording, press it again.
Photo Button:
1. Press to take photo.
2. When recording video, press to capture the image.
Tele Button:
1. Zoom In.
Wide Button
1. Zoom out.
Power Button:
1. Press down for one second to turn on or turn off the camcorder.
Playback Button:
1. Switch between Record / Playback Mode.
2. For quick review, press it after recording.
Pause Button:
1. Press to pause the recording.
2. To continue the recording, press it again.
Digital Light Button:
Digital Light On/Off.
Stabilization Button:
Stabilization On/Off.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Monitor Information
The indicators shown below may display on LCD when videos and photos are recorded:
Video Resolution
Full HD (1080p 30 fps)
HD (720p 60 fps)
HD (720p 30 fps)
VGA (640X480)
(1)
Slow Motion (Record video at 432x240(QVGA) resolution.)
Photo Resolution
16MP
5MP
3MP
Recording time of the video that can still be taken at current
00:05:30
resolution
(2)
Number of images that can still be taken at current resolution
Self-timer enabled
(3)
Dual Record
(4)
(5)
Playback Mode On
Menu On
(6)
(7)
Information bar On
SD Card Inserted
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Auto (Photo Recording Only)
Red Eye Reduction (Photo Recording Only)
Flash Off
(8)
(9)
Digital Light On
(10)
Stabilization
Pre-Record Mode
Time Lapse
(11)
(12)
(13)
Smile Detection
Macro Focusing On
Daylight
Fluorescent
Tungsten
Scene
Skin
Night
(14)
Backlight
Black/White
Classic
Negative
(15)
(16)
Date Printing On
Battery: full power
Battery: medium power
Battery: low power
Battery: empty power
DC power mode
(17)
(18)
Motion Detection
Zoom meter:
1X~2700X (23X Optical zoom and 120X Digital zoom)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• Stabilization, Time Lapse, and Slow Motion functions can not be used simultaneously.
• Stabilization and Night Mode functions can not be used simultaneously.
• Pre-Record, Motion Detect, Slow Motion, and Time Lapse functions can not be used
simultaneously.
Video Recording
• Press [Video Button] to start recording. When a video is being recorded, a time indicator will display
on the LCD monitor (
). To stop recording, press it again.
00:00:36
• To pause recording: Press [Pause Button] to pause recording (
). To continue the recording,
press it again.
• Dual record: press [Photo Button] to capture the image.The Dual record icon(
) appears on the
LCD monitor.
• Press [Playback Button] or touch
• Four resolution settings are available:
Video Quality
on the screen to view the recorded video.
Full HD (1080p 30 fps)
HD (720p 60 fps)
HD (720p 30 fps)
VGA (640X480)
Note
• The image resolution captured during video recording is the same as the video resolution.
• The flash can not be used when capturing image during movies recording.
Photo Capturing
• Press [Photo Button] halfway down until the focusing frame turns from white to green. Then, press it
fully down to take photo.
• Press [Playback Button] or touch
• Three resolution settings are available:
Image Quality
on the screen to view the photos.
16 Mega Pixels
5 Mega Pixels
3 Mega Pixels
Using Zoom Function
• The zoom magnifies images when recording video or taking photo.
1. To zoom in/out, press the Tele/Wide Button.
2. It can be set from 1X~2700X (23X Optical zoom and 120X Digital zoom)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Digital Light Function
• The setting allows you to extend the brightness of the objects that are dark or in the shadow. It can
extend the dynamic range for backlight and high contrast sense, so that the objects will be brighter
and clearer.
• To use the Digital Light function:
1. Press [Digital Light Button] in Record Mode. The Digital Light icon(
) appears on the LCD
monitor.
2. Press [Video Button] to start recording or press [Photo button] to take photo.
Using Stabilization Function
• To record with an effect of reducing camcorder shake to result in more stable video.
• To use the Stabilization function:
1. Press [Stabilization Button] in Record Mode. The Stabilization icon(
) appears on the LCD
monitor.
2. Press [Video Button] to start recording.
Showing Information on the screen
• Touch the on-screen button to show or not to show the indicators on the LCD screen.
Operation
Screen
1. Touch
the screen.
2. Touch again to hide all indicators.
on the screen. The information bar will show on
3. Touch
to display the indicators.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Options for Record Menu
Video
Photo
Effect
Setting*
• Resolution
• Pre-record
• Motion Detect
• Slow Motion
• Time Lapse
• Resolution
• Flash
• Scene
• Sound
• WB(White Balance) • TV
• Self-Timer
• Smile Detect
• ISO
• Macro Mode
• Language
• Time Setting
• Face Tracking
• Date Printing
• Format
• Default Setting
* Please refer to Section 5 for the detailed information about [Setting].
Operations for Record Mode
Operation
Display Screen
1. Touch
on the screen in Record Mode. The menu
will show on the screen.
2. Touch the option icons on the screen lightly with your
finger. The options are Video, Photo, Effect, and Setting.
3. The option submenu will pop up on the screen.
4. Touch to select the specific option you want to adjust. (
The selected option will be highlighted.)
5. Touch the Exit icon (
) to exit.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
Operation
Display Screen
1. Touch
on the screen in Record Mode. The menu
will show on the screen.
2. Touch the [Video] icon on the screen. Submenu of Video
will pop out on the screen.
3. The Video submenu contains 5 options-- Resolution, Pre-
record, Motion Detect, Slow Motion, and Time Lapse --for
you to adjust the camcorder settings.
Video Resolution
Four resolution settings are available.
• FHD (1080p 30):Record videos at 1920x1080p 30 fps resolution.
• HD+ (720p 60):Record videos at 1280x720p 60 fps resolution.
• HD (720p 30):Record videos at 1280x720p 30 fps resolution.
• VGA (640X480): Record videos at 640x480p 30 fps resolution.
Operation
Display Screen
1. In the Video menu, touch the [Resolution] icon on the
screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Pre-record
The Pre-record function ensures that you will not miss any critical recording opportunities. The videos
are recorded 3 seconds more before the [Video Button] is pressed.
Operation
Display Screen
1. In the Video menu, touch the [Pre-record] icon on the
screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Note
• Aim the camcorder at the subject and position it securely.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection
Record videos automatically when the camcorder detects a movement.
Operation
Display Screen
1. In the Video menu, touch the [Motion Detect] icon on the
screen.
2. Touch to select [On] or [Off] (
3. Touch the Exit icon ( ) to exit.
).
4. Camcorder will start to record video automatically if it
detects a movement. Stop recording if it does not detect
a movement.
Slow Motion
Record videos with slow motion effect. When the video is played, the playback time will be longer than
the actual recording time.
Operation
Display Screen
1. In the Video menu, touch the [Slow Motion] icon on the
screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Note
• Pause function can not be used when Slow Motion function is activated.
Time Lapse
Record still images at specific intervals you can set and play them as one video file.
• Off: Disable Time Lapse.
• 1 Second.: Record one frame per second.
• 3 Seconds: Record one frame every 3 seconds.
• 5 Seconds: Record one frame every 5 seconds.
Operation
Display Screen
1. In the Video menu, touch the [Time Lapse] icon on the
screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Note
• Pause function can not be used when Time Lapse function is activated.
Photo
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Display Screen
1. Touch
on the screen in Record Mode. The
menu will show on the screen.
2. Touch the [Photo] icon on the screen. Submenu of
Photo will pop out on the screen.
3. The Photo submenu contains 5 options-- Resolution,
Flash, Self-Timer, Smile Detect, and ISO, --for you to
adjust the camcorder settings.
Photo Resolution
Three resolution settings are available.
• 16MP:Shoot photo at 4608 x 3456, 16MP quality.
• 5MP:Shoot photo at 2592 x 1944, 5MP quality.
• 3MP:Shoot photo at 2048 x 1536, 3MP quality.
Operation
Display Screen
1. In the Photo menu, touch the [Resolution] icon on the
screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Flash
This camcorder has three flash settings.
• Flash Auto: The flash fires automatically according to light conditions. Use this mode for general
photography.
• Red Eye Reduct. (Red Eye Reduction) :The pre-flash will fire to reduce the red-eye effect.
• Flash Off: The flash will not fire under any circumstances. Use this mode when taking photo in a
place where flash photography is prohibited, or when the subject is distant (beyond the range of the
flash).
Operation
Display Screen
1. In the Photo menu, touch the [Flash] icon on the screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Note
The flash will be disabled automatically when the battery power is low (
).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Timer
The self-timer allows you to take photos with a ten-second time delay. The self-timer light on the front
of the camcorder will also blink. The speed of blinking will increase just before the photo is taken.
Operation
Display Screen
1. In the Photo menu, touch the [Self-timer] icon on the
screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Smile Detection
Capture image automatically when the camcorder detects a smile.
Operation
Display Screen
1. In the Photo menu, touch the [Smile Detect] icon on the
screen.
2. Touch to select [On] or [Off] (
3. Touch the Exit icon ( ) to exit.
).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO
The camcorder adjusts the ISO sensitivity of its images automatically. Four manual ISO sensitivity
settings are available. (800/1600/3200/6400). The larger the number is, the higher the ISO sensitivity is
set to. Select a small number to shoot a smoother image. Select a large number to shoot an image in a
dark location or to shoot a subject moving at high speed.
Operation
Display Screen
1. In the Photo menu, touch the [ISO] icon on the screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Note
The image may become noisy when the ISO number is large.
Effect
Operation
Display Screen
1. Touch
on the screen in Record Mode. The menu
will show on the screen.
2. Touch the [Effect] icon on the screen. Submenu of Effect
will pop out on the screen.
3. The Effect submenu contains 4 options--Scene, White
Balance, Macro Mode, and Face Tracking --for you to
adjust the camcorder settings.
Scene
You can select the mode according to the scene condition.
• Auto: Shoot without any special effect on the image.
• Skin: Shoot with an effect that makes skin tones more natural.
• Night: Use Night Mode for night scenes or low light conditions.
• Backlight: You can take shots when the bright light is behind the subject.
• Black/White: The image is converted to black-and-white.
• Classic: The image is converted to a sepia look.
• Negative: The image is converted as the negative of the normal.
Operation
Display Screen
1. In the Effect menu, touch the [Scene] icon on the
screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Note
To avoid blurry photos, place the camcorder on a flat, steady surface, or use a tripod when taking
shots in the Night Mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
The camcorder adjusts the color balance of images automatically. Three manual white balance settings
are available:
• Auto: The camcorder automatically adjusts white balance.
• Daylight: Under outdoor condition.
• Fluorescent: Under fluorescent light condition.
• Tungsten: Under tungsten light condition.
Operation
Display Screen
1. In the Effect menu, touch the [White Balance] icon on
the screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Macro Mode
You can select the mode for recording close-up video and photo.
Operation
Display Screen
1. In the Effect menu, touch the [Macro Mode] icon on the
screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Face Tracking
The camcorder can detect human face(s) and focus on the face(s) automatically. This function can works
with video recording and photo capturing. It is wonderful for capturing beautiful portraits in backlight
situation.
Operation
Display Screen
1. In the Effect menu, touch the [Face Tracking] icon on
the screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Note
When Face Tracking is activated, aim the camcorder at the human face(s). The focus frame(s) will
show on the LCD before the [Video Button]/[Photo Button] is pressed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4
Enjoying the Playback Mode
Button Function
The Buttons have the following functions in Playback Mode.
Video Button:
1. Switch to Record Mode.
Tele Button:
1. Zoom In.
Wide Button
1. Zoom out.
Playback Button:
1. Switch between Record / Playback Mode.
2. For quick review, press it after recording.
Pause Button:
1. In Video Playback Mode, press to pause the recorded video.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Monitor Information
Indicators on the LCD screen while in Playback Mode:
Video Playback Mode
Photo Playback Mode
Video Resolution
Full HD (1080p 30 fps)
HD (720p 60 fps)
HD (720p 30 fps)
VGA (640X480)
(1)
Slow Motion (432x240(QVGA))
Photo Resolution
16MP
5MP
3MP
Dual Record (The image resolution captured during videos recording
is the same as the video resolution.)
Video playback time counter.
(2)
(3)
Current number/ Total number of photo/video.
0003/0005
Volume
Return
(4)
Video stop
(5)
(6)
Previous video/photo
Video fast rewind
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Video play
(7)
Video pause
(8)
(9)
Video fast forward
Next video/photo
(10)
Delete
Slideshow
Slideshow stop
(11)
(12)
Magnification Indicator
Operations for Playback Mode
The Playback Mode is for viewing and managing videos and photos on the built-in memory or on an SD
Card.
Operation
Display Screen
1. Press [Playback Button] or touch
switch to the Playback mode.
on the screen to
2. Touch to select the specific option.
3. Touch (
) to back to Record Mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Playback
Operation
Display Screen
1. In the Video Playback mode, touch
or pause the videos.
/
to play
2. Sweep to the right or touch
video; sweep to the left or touch
video.
to go to the previous
to go to the next
3. While playing videos, touch
forward.
/
to fast rewind/
4. Touch
to increase the volume; touch
to
reduce the volume.
5. Touch (
) to exit.
Note
• When the LCD is idle for a few seconds, the playback function icons will disappear
automatically.
Delete Videos
Operation
Display Screen
1. Touch
to go to the Delete option screen.
2. Touch [Yes] to delete the current video or [No] to cancel
the operation and to exit; touch [All (Delete All)] to
delete all videos.
3. Before all videos are about to be deleted, a confirmation
screen will appear; touch [Yes] to execute the operation
and [No] to cancel the operation.
Note
• If a memory card has been inserted, you can only delete those videos stored on the card.
• Videos on a written-protected memory card cannot be deleted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Playback
Operation
Display Screen
1. In the Photo Playback mode, sweep to the right or touch
to go to the previous photo; sweep to the left or
touch
to go to the next photo.
2. While the photo is selected, press [Tele Button] to magnify.
(The magnification Indicator appears on the screen)
3. To navigate the magnified photo, press on the screen and
move as well. (The inner Magnification Indicator turns
red)
4. Press [Wide Button] to zoom out or exit the magnification
mode.
5. Touch
/
to start or to stop the slide show.
6. Touch (
) to exit.
Note
• When the LCD is idle for a few seconds, the playback function icons will disappear
automatically.
Delete Photo
Operation
Display Screen
1. Touch
to go to the Delete option screen.
2. Touch [Yes] to delete the current photo or [No] to cancel
the operation and to exit; touch [All (Delete All)] to delete
all photos.
3. Before all photos are deleted, a confirmation screen will
appear; touch [Yes] to execute the operation and [No] to
cancel the operation.
Note
• If a memory card has been inserted, you can only delete those photos stored on the card.
• Photos on a written-protected memory card cannot be deleted.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5
Setting Your Camcorder
Setting Menu
Operation
Display Screen
1. Touch
on the screen in Record Mode. The menu
will show on the screen.
2. Touch the [Setting] icon on the screen. Submenu of
Setting will pop out on the screen.
3. The Setting submenu contains 7 options for configuring
your camcorder setup. They are Sound (operation
sound), TV, Language, Time Setting, Date Printing,
Format, and Default Setting.
Sound
Enable or disable the keypad tone and the operation sound.
Operation
Display Screen
1. In the Setting menu, touch the [Sound] icon on the
screen.
2. Touch to select [On] or [Off] (
3. Touch the Exit icon ( ) to exit.
).
TV
Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. Wrong TV
system setting may cause image flickers.
• NTSC(60Hz):USA, Canada, Japan, South Korea and Taiwan, etc.
• PAL(50Hz):UK, Europe, China, Australia, Singapore and Hong Kong, etc.
Operation
Display Screen
1. In the Setting menu, touch the [TV] icon on the screen.
2. Touch to select [PAL] or [NTSC].
3. Touch the Exit icon (
) to exit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
Use this option to select the language of the user interface.
Operation
Display Screen
1. In the Setting menu, touch the [Language] icon on the
screen.
2. Touch to select the desired option.
3. Touch the Exit icon (
) to exit.
Time Setting
Operation
Display Screen
1. In the Setting menu, touch the [Time Setting] icon on the
screen to enter the time setting screen.
2. Touch Year, Month, Day, Hour, Minute, and AM/PM to set.
3. Adjust the numeric value by touching
/
4. Touch the [OK] icon to validate the setting.
5. Touch the Exit icon (
) to exit.
Date Printing
Imprint the date and time on the video and photo.
Operation
Display Screen
1. In the Setting menu, touch the [Date Printing] icon on the
screen.
2. Touch to select [On] or [Off] (
).
3. Touch the Exit icon (
) to exit.
Note
• Date Printing function can not be used when Slow Motion function is activated.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
• Yes: Format the built-in memory ( When there is no SD card in the camcorder ) / SD Card (When
there is an SD card in the camcorder).
• No: Do not format the built-in memory ( When there is no SD card in the camcorder ) / SD Card (When
there is an SD card in the camcorder).
Operation
Display Screen
1. In the Setting menu, touch the [Format] icon on the
screen.
2. Touch to select [Yes] or [No] (
).
(Touch [Yes]
to enter the confirmation screen.)
3. Touch the [Yes
] icon to execute the operation and
the [No
] icon to cancel the operation.
Note
All the data will be erased if the SD card is formatted. Make sure all the data are copied to your
PC before formatting the SD card.
Default Setting
To restore the default factory setting, select this option.
Operation
Display Screen
1. In the Setting menu, touch the [Default Setting] icon on
the screen.
2. Touch to select [Yes] or [No] (
).
(Touch [Yes]
to enter the confirmation screen.)
3. Touch the [Yes
the [No
] icon to execute the operation and
] icon to cancel the operation.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
The following table indicates the camcorder’s default settings
Setting
Default Factory Setting
FHD (1080p 30) for Video
5MP for Photo
Resolution
Stabilization
Motion Detection
Slow Motion
Time Lapse
Self-Timer
Smile Detection
ISO
Off
Off
Off
Off
Off
Off
Auto
Scene
Auto
White Balance
Face Tracking
Flash
Auto
Off
Off
Sound
On
TV
Depends on shipping area
Language
Date Printing
Volume
Depends on shipping area
Off
Level 6
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6
Viewing Photos and Videos on TV
Connecting to a High-Definition 16:9(Wide) TV
1. Connect the HDMI cable to your camcorder’s HDMI Out port.
2. Connect the other end of the cable to a television.
3. Set the video input source of your TV to “ HDMI.”
4. The steps for viewing stored videos and photos on HDTV are exactly the same as for viewing them
on the LCD monitor.
(16:9)
Connecting to a non-high-definition 4:3 TV
1. Connect one end of the AV cable to your camcorder’s AV out port.
2. Connect the other end of the cable to a television.
3. The steps for viewing stored videos and photos on TV are exactly the same as for viewing them on
the LCD monitor.
( 4 : 3 )
R
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 7
Viewing Video & Photo on PC
Installing Bundled Software
The CD-ROM supplied with this camcorder contains 2 pieces of software.
• ArcSoft MediaImpression is a user-friendly application that helps you managing your media, burning
your video into DVD, and uploading your files to the web sites easily.
• Adobe Reader is a popular program that you need to have installed to read the User’s Manual. Many
computer users will find they already have this software installed on their computer.
To install the bundled software:
1. Insert the CD-ROM into your computer’s CD-ROM drive. The autorun screen appears.
2. Click “Install ArcSoft MediaImpression”. Follow the on-screen instructions to complete the
installation.
Note
• The detailed Instructions for the bundled software can be found within the program once
the installation is completed. Click on [Extras] on the title bar and select [Help] to open the
instruction manual.
• Install the bundled software application, ArcSoft MediaImpression, for viewing the videos
correctly on a PC.
Transferring Photos or Videos to a Computer
You can transfer photos or videos stored on your camcorder to a computer and send them in e-mails to
friends or post them on the web sites.
To do this you should:
1. Connect the computer and camcorder with the supplied mini USB 2.0 cable. .
2. The videos and photos can be found on your computer at “My Computer\Removable Disk\
DCIM\100MEDIA”. (Under the circumstances of within the SD card in the camcorder)
3. Under this folder, you can view, delete, move, or copy any video/photo you want.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 8
Uploading Files to Internet
The built-in Internet Direct application offers you an easy way to upload your files to Internet instantly.
It helps you share them with your family and friends on the web site.
To upload files to Internet:
1. Connect the camcorder to your computer by using the supplied USB cable.
2. After making a USB connection, the AutoPlay window will appear. (It may be different based on OS
recognition. If the AutoPlay window does not appear. Please click [My Computer]-->[DVAP]-->[DVAP.
exe] to execute the application.)
(In Windows XP)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The main screen appears automatically on the desktop. (To view the recorded clips on Internet Direct,
it is necessary to install ArcSoft MediaImpression first. )
Note
• The web site may be not allowed to access in certain regions.
4. On the thumbnail screen, click on the up/down icon to change the pages. Click on the file(s) you
want to upload.
5. Click on “ UPLOAD” to start uploading.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click on “ CANCEL” to stop uploading.
To playback the video file:
1. Double click on the video clip on the thumbnail screen.
2. Click on the Play/Pause icon
to play/pause. Click on the Return icon
to return to the
thumbnail preview screen.
To setup your account information for the website:
1. Click on
to go to the setup screen.
2. Fill in your account information in the blanks. Then click on “Save”.
(If you do not have a account, please sign up on the website first.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 9
Specifications and System Requirements
Specification
Image sensor
5 Mega pixel CMOS sensor
Operation modes Video record, Photo record
Lens
Auto Focus Lens (F3.5)
Focus range
Macro Mode:1cm~120cm
Normal Mode: 1 cm ~ infinite
Zoom
1X~2700X (23X Optical zoom and 120X Digital zoom)
Electronic
Shutter
LCD monitor
Storage media
3” touch LCD (16:9)
Built-in 128MB memory (partial memory is used for firmware code and software);
SD/SDHC/SDXC card slot support (up to 64GB)
Image resolution High 4608 x 3456 (16M pixels) (Interpolated)
Standard 2592x1944 (5M pixels)
Low 2048x1536 (3M pixels)
Video resolution FHD (1080p 30) 1920X1080(30fps)
HD+ (720p 60) 1280X720(60fps)
HD (720p 30) 1280X720(30fps)
VGA (640X480) 640X480(30fps)
White balance
ISO
Auto/Manual (Daylight, Fluorescent, Tungsten)
Auto/800/1600/3200/6400
Self-timer
Flash
10 seconds delay
Flash Auto/Red-Eye-Reduction/Flash Off
Photo: JPG
File format
Video: AVI
Image play
PC interface
TV out
Single image/Slideshow
Mini USB 2.0 port
NTSC/PAL selectable, HDMI
Lithium-ion rechargeable battery
126mm (L) x 57mm (H) x 60mm (W)
340g ( without battery)
Battery
Dimension
Weight
35
Download from Www.Somanuals.com. All Manuals Search And Download.
System requirements
• Microsoft Windows XP/Vista/7
• Intel Pentium 4, 2.4 GHz or above
• 512 MB RAM
• 1 GB free HDD space
• Available USB port
• CD-ROM Drive
• 16-bit Color Display
Note
The LCD screen is manufactured using extremely high-precision technology, so over 99.99% of
the pixels are operational for effective use. However, some tiny black and/or bright dots (white,
red, blue or green) may appear on the LCD screen. These dots are a normal result of the
manufacturing process, and do not affect the recording.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 10
Troubleshooting
Troubleshooting
1. The flash is not working.
The battery power is low.
The camcorder is in DC power mode.
In flash auto mode, camcorder flash fires ONLY when necessary (in dark setting as example).
2. The files on the memory card do not display smoothly when the LCD shows the “!” marking.
The “!” means the SD card is low speed or is having wrong content inside. The way to solve this
condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed Format
instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
3. Why do some of my indoor photos look blurry and dark?
The camcorder extends photo exposure time under low light/ indoor condition. Keep the camcorder
(and
the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
4. How do I charge battery?
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. The
blinking light confirms the camcorder is currently charging, and the light becomes constant after the
charging is completed. In AC charging Mode, the light will turn itself off automatically after 3~5
minutes . The full charge time is about 4 to 5 hours. (Actual charging time may vary. It depends on
the battery conditions.)
5. After connecting the USB cable to the computer, ……
1. The disk [DV] indicates the internal memory of the camcorder. (The disk label may be different
according to different model and PC OS.)
2. [Removable Disk] indicates the external memory. (Under the circumstances of within the SD/
SDHC/SDXC card in the camcorder)
3. The disk [DVAP] indicates the built-in Internet Direct application is saved at this disk. Please DO
NOT format this disk or delete the application inside; otherwise, the Internet Direct application
can not function.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 11
Using Remote Control
Remote Control
[Tele] Button
[Wide] Button
[Video] Button
[Pause] Button
[Photo] Button
[Digital Light] Button
[Return] Button
[Delete] Button
[Volume Up] Button
[Next] Button
[Previous] Button
[Playback]/[Stop]
Button
[Rewind] Button
[Forward] Button
[Volume Down] Button
Button Functions
Video Button:
1. Press to take video.
2. To stop recording, press it again.
Pause Button:
1. Press to pause the recording.
2. To continue the recording, press it again.
3. In Video Playback Mode, press to pause the recorded video.
Tele Button:
1. Zoom In.
Wide Button
1. Zoom out.
Photo Button:
1. Press to take photo.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Light Button:
1. Digital Light On/Off.
Delete Button:
1. Delete the current or all videos/photos.
Volume Up Button:
1. Volume increase.
Return Button:
1. Return to the previous screen.
Next Button:
1. Go to the next video/photo
Playback/Stop Button:
1. Switch to the Playback Mode.
2. For quick review, press it after recording.
3. In Video Playback Mode, press to stop the recorded video.
Previous Button:
1. Go to the previous video/photo
Forward Button:
1. Video fast forward
Volume Down Button:
1. Volume decrease.
Rewind Button:
1. Video fast rewind
Note
• Record menu is not accessible via the remote control.
• When the battery power of the remote control becomes weak, the remote control may not
function properly. In this case, please replace the battery.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T = Telephone
F = FAX
Country/Region Website
Email
Australia/New
AUS= 1800 880 818
NZ= 0800 008 822
Zealand
Canada
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 266 0101
Ireland (Eire)
uk/
support/call-desk/
Korea
T= 080 333 2131
Latin America
(Argentina)
T= 0800-4441185
T= 1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America
(Chile)
Latin America
(Columbia)
Latin America
(Mexico)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
Latin America
(Peru)
T= 0800-54565
Macau
T= 853 2870 0303
Middle East
ap.viewsonic.com/me/
Contact your reseller
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico &
Virgin Islands
Singapore/
Malaysia/Thailand
T= 65 6461 6044
South Africa
ap.viewsonic.com/za/
Contact your reseller
United Kingdom
uk/
support/call-desk/
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
ViewSonic® Digital Video Camcorder
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under
normal use, during the warranty period. If a product proves to be defective in material or
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace
the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Video Camcorder are warranted for 1 year for labor from the date of the
first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied
with the product.
b.
c.
d.
e.
f.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electrical power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
g.
Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results
when a static image is displayed on the product for an extended period of time.
4. Removal, installation, one way transportation, insurance, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
Support (please refer to Customer Support page). You will need to provide your
product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales
slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial
number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized
ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained
herein including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic
shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
4.3: ViewSonic Digital Video Camcorder Warranty
3DC_LW01 Rev. 1A 08-05-08
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
ViewSonic® Digital Video Camcorder
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Video Camcorder are warranted for 1 year for labor from the date of the first
customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
2.
Any product on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
a.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Any damage of the product due to shipment.
b.
c.
d.
e.
f.
Removal or installation of the product.
Causes external to the product, such as electrical power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
g.
Any other cause which does not relate to a product defect.
3.
4.
Any product exhibiting a condition commonly known as “image burn-in” which results when a
static image is displayed on the product for an extended period of time.
Removal, installation, one way transportation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please
refer to the attached Customer Support page). You will need to provide your product’s serial number,
so please record the product information in the space provided below on your purchase for your future
use. Please retain your receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name: ________________________
__________________________
Document Number: ____________________
__________________________
Purchase Date: ________________________
(Y/N)
Model Number:
Serial Number:
Extended Warranty Purchase? __________
If so, what date does warranty expire?
________
1.
To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b)
your name, (c) your address, (d) a description of the problem, and (e) the serial number of the
product.
2.
3.
Take or ship the product in the original container packaging to an authorized ViewSonic service
center.
Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not
be liable for:
1.
Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial loss,
even if advised of the possibility of such damages.
2.
3.
4.
Any other damages, whether incidental, consequential or otherwise.
Any claim against the customer by any other party.
Repair or attempted repair by anyone not authorized by ViewSonic.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
E-Mail: disc2@hmo.megared.net.mx
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: compumantenimientos@prodigy.net.mx
Puebla, Pue. (Matriz):
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: datos@puebla.megared.net.mx
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: gacosta@qplus.com.mx
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: Cefeo@soluglobales.com
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: aquevedo@compusupportcva.com
Distrito Federal:
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : gacosta@qplus.com.mx
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: mmiranda@servicrece.com
Guerrero Acapulco
Monterrey:
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: aydeem@gps1.com.mx
MERIDA:
Oaxaca, Oax.:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Fax: 01(52)95-15-13-67-00
E-Mail. gpotai2001@hotmail.com
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: rrrb@sureste.com
Tijuana:
FOR USA SUPPORT:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
3DC_LW01 Rev. 1A 08-05-08
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
TDK Stereo System VLA 2001 User Manual
Techno Source Handheld Game System 0500 User Manual
Toshiba Copier 190F User Manual
Toshiba Laptop 2410 Series User Manual
Transcend Information Computer Drive V33p User Manual
Troy Bilt Snow Blower 2690XP User Manual
Tunturi Home Gym ALPHA 15O User Manual
Univex Headphones Wireless Headset System User Manual
Victor Enterprise Welding System FP 120 User Manual
Vosonic Digital Camera VP8360 User Manual