ViewEra Computer Monitor V195MV User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
To ensure your safety and extend  
Thank you for selecting ViewEra's high performance, multi-function LCD monitor .  
product life, please read and follow the instructions before using it, and comply with the following safety cautions:  
1
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.  
2 ) Keep the manual for future use.  
3
4
5
Follow all the warnings and instructions strictly on the manual.  
It is high dangerous voltage inside the product. Do not attempt to repair the product by yourself.  
This monitor is equipped with a three-wire grounding type of power source indicated on the marking label. If the plug can't  
be inserted iinto. the outlet, please contact a technician for replacing the original outlet to keep the safeguard measure in effect.  
Do not allow water or other liquids to spill on or into the LCD monitor  
6
7
8
9
Don't use the attachments which are not recommended by the monitor manufacturer as they may cause hazards.  
Do not rest anything on the power cord.. If the power cord is damaged, do not use the monitor.  
Don't overload outlets or extend cords as it can result in fire or electric shock.  
10 If you want to disconnect the power cord from the product, be sure to grasp the plug, not the cable.  
11 Unplug the monitor when it is going to be left unused for an extended period of time.  
12 Place the monitor in a place of good ventilation, low humidity and dust environment, and avoid direct sunlight.  
13 The openings on the back cover are designed for ventilation. To prevent overheating, do not block or cover these openings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
surface .Don't place the machine near or over heat source or place in built-in installation.  
141 Unplug your monitor from the electric outlet before any service is performed. .  
15 Don't use solvents, like ethyl alcohol, acetone, ethanol and hexane to clean the surface of LCD screen.  
16 Don't place the machine near water source such as bathtub, washbowl, sink, laundry tub, swimming pool, etc.  
17 The LCD panel is made of glass, the surface of screen is easy to be frayed. Don't knock or press on the surface of  
the panel with finger or other objects, otherwise it can result in damage to the panel.  
18 Don't remove or open the cover by yourself. It may expose you to dangerous voltage or other hazards .  
19 Do not put the monitor at the place where user is subject to mal-operation.  
20 High temperatures can cause problems. Keep the monitor away from heaters, stoves, fireplaces, etc.  
21 Please keep the foam and box of package for future use. These are ideal packing material for transportation.  
22 Unplug this machine from the outlet and refer servicing to qualified service personnel under the following conditions:  
A. The power cord is frayed or damaged.  
B. The monitor has been dropped or the cabinet has been damaged.  
C. When the performance of the monitor deteriorates distinctly.  
D. If liquid has been spilled into the machine.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. INTRODUCTION  
General information  
HDMI supports 1080 p/i, 720 p, 576 p/i, 480 p/i video signal.  
Support HDCP (High-bandwith Digital Content Protection)  
Featured built-in speakers, they will give you audio enjoyment and save your space.  
With multiple connectors, you may directly connect it to your DVD player, VCR or game console, etc. The Components  
Video input connectors let you enjoy beautiful image quality. The monitor can be used as a computer monitor with  
VGA or HDMI connectors, which can display at resolution of 1680X1050.  
Fast response time will completely eliminate shadow of picture. Watching films and playing games can be  
more smooth.  
Wide viewing angle, highe brightness, highe contrast and lower power consumption  
Intelligent image mode and sound mode can offer you intelligent audio and visual effects.  
Built-in digital comb filter makes image more clear. The internal 3D De-Interlace technology  
can totally eliminate the screen dithering caused by interlace signals.  
With sleep timer, you can set time to turn off. It will be turned off in state of no signals, too.  
Convenient use with a remote cotrol  
Auto-setup function help you set the image to best performance  
Auto color balance adjustment makes your monitor to display an optimal color setting for different kinds  
of display device.  
Advanced noise reduction technology can greatly eliminate background noise and make the picture clear.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Package Contents  
Unpack the package and check if you have the following items.  
TFT-LCD monitor (19 inch for V193 series; 22 inch for V220 series)  
VGA signal cable  
Audio cable  
Power cord  
Remote control  
User manual  
If any of the items is missing, please contact with your dealer at which you purchased the monitor.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Installation  
Note: Disconnect the power plug while installing the monitor. Plug the power plug after cable connections are done.  
You can find more connectors when you take off the cover board on the left of the rear cover [Fig.2]  
Component connection [Fig.1]  
Connect Y, Pb/Cb, Pr/Cr Video Out on  
a video player to the monitor Y, Pb/Cb,  
Pr/Cr Video In, and then connect Audio  
Out left and right on a video player to  
the monitor Audio In left and right.  
AV connection [Fig.2]  
You can also watch video by connecting  
composite AV connectors. Connect one end  
of of the cable to Audio/ Video Out on a  
video player, and the other end to to the  
Audio/ Video In on the monitor.  
Power Supply  
Computer connection [Fig.2]  
You can use a VGA or HDMI Male-to-DVI  
Male cable to connect the monitor to your  
Pr/Cr Pb/Cb  
Y
R
L
computer. For PC audio, you can plug one  
end of the audio cable to PC Audio on the  
monitor, and then plug the other end into the audio  
Connect to VCR  
CATV  
Connect to DVD  
Fig.1  
input on your computer.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Cord Connection  
Plug one end of the power cord into the monitor power jack and then plug the other end into the outlet.  
Earphone connection [Fig.2]  
When you enjoy music with earphone, you can insert the plug of earphone into earphone jack on the monitor.  
Then the monitor will automatically mute the speakers.  
Base installation  
Please refer to Fig.3, Fig.4  
Note: HDMI connector can  
recognize DVI signal via a  
HDMI Male-to-DVI Male cable.  
Left Right  
OR  
S-Video  
Audio  
Video  
Audio  
HDMI  
VGA  
Connect to DVD/VCR/VCD etc  
Connect to PC  
Fig.2  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Front Panel Control Keys  
SOURCE  
CH+  
3
5
CH-  
VOL+  
VOL-  
6
MENU  
4
7
POWER  
8
1
2
1) Power Indicator  
2) IR Sensor: It is to receive signals from remote contorl.  
3) Signal Source: press this key to enter the menu of signal source and choose signal source.  
4) Menu: press this key to enter main menu  
5) CH+/CH-: Press these two keys to adjust the options you need under OSD operation.  
6) VOL+/VOL-: Press these two keys to adjust the analog value under OSD operation.  
7)  
8)  
Power On/Off  
Earphone Socket: The TV speakers will be shut off when earphone is plugged into this socket.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Remote Control  
POWER  
MUTE  
Function  
Key  
Power  
Info  
Power  
Mute  
Turn on or standby  
ABC  
DEF  
2
GHI  
3
1
Numerical key  
JKL  
MNO  
PQR  
System information display switch  
4
STU  
7
5
VWX  
8
6
YZ  
9
Mute sound; press again to restore sound  
Mute  
Program list(optional)  
Digit  
0
Timer  
Time setting button  
SMART  
S
SMART  
P
Smart image  
Smart sound  
Menu  
Numerical key Number input button  
MENU  
SOURCE  
Source  
OK  
Program list  
Digit  
Scan or set program list  
Change digit  
Cursor key  
OK  
Up or down cursor button: function seclect;  
left or right cursor button: analog add or reduce.  
Volume  
Channel  
Cursor  
OK  
Confirm actions  
INFO  
16:9  
Info  
Time  
Switch16:9/4:3(optional)  
Return  
DCDi COLOR  
P/N  
AUDIO  
Select higher or lower channel number  
Channel  
Volume  
Menu  
DCDi(optional)  
Color(optional)  
NICAM(optional)  
Color system(optional)  
Increase or decrease volume  
Press this menu button to display menu  
Press this button to display signal source  
selection menu  
Source  
Smart sound  
Return  
Intelligent sound mode selection  
Press this button to return to last  
channel  
Smart image  
Intelligent image mode selection  
Remote Control  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Basic Operations  
Power On  
Plug power cord into the outlet and press '' '' key on the front panel or press ''Power'' key on the remote  
control to turn on the monitor.  
Signal Source Selection  
Press ''SOURCE'' key either on the remote control or on the front panel. ''INPUT SOURCE''  
will be displayed on the screen. Then press ''Up/Down'' key on remote control or "CH+/CH-" key on the  
front panel to choose the signal source such as TV(optional) AV, S-VIDEO, YPBPR, PC, HDMI. Press  
''OK'' key on the remote control or "MENU" key on the front panel to switch the signal source.  
TV  
AV  
SVIDEO  
YPBPR  
PC  
HDMI  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Menu  
Press ''MENU'' key on the remote control or on the front panel. The  
monitor will display the main menu.  
1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''key  
on the front panel to select the submenu, which  
P I C T U R E M O D  
C O N T R A S T  
B R I G H T N E S S  
H U E  
E
P E R S O N A L  
includesPICTURE SOUND ADVANCE SYSTEM  
TV-CHANNEL (optional).  
6 1  
4 1  
5 0  
4 6  
4 8  
5 0  
S A T U R A T I O N  
S H A R P N E S S  
B L A C K L I G H T  
C O L O R T O N E  
2. Press ''Down''key on the remote control or ''CH-'' on the front panel  
to enter the submenu.  
W A R M  
3. Press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the  
front panel to select what is needed to adjust in submenu.  
4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-''on the  
front panel to adjust the value or setting.  
MENU  
E X I T :  
P I C T U R E  
S E L E C T :  
A D J U S T :  
5. Press ''Menu'' key to exit the main menu when the monitor displays  
Main Menu. Press ''Menu'' key to return to previous menu when the  
monitor displays the sub-menu. Press ''Source''key to display the signal source menu.  
6. During the operation, the selections which can not be adjusted at current mode will be hidden automatically and the  
color of the selections will be changed into gray.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjustment  
Select  
to enter the Picture Adjustment submenu. Press "Up/Down" key on the remote control or the key " CH+/CH-" on  
the front panel to choose what you need. Press the "Left /Right "key on the remote control or the" VOL+/VOL-" key on the  
front panel to adjust analog value or state (see below table).  
Attention  
1. The Hue function is available only for NTSC system.  
2. The value adjusted by user, such as Contrast, Brightness,  
Saturation, Hue, and Sharpness, will be saved automatically  
P I C T U R E M O D  
C O N T R A S T  
B R I G H T N E S S  
H U E  
E
P E R S O N A L  
by the machine as user's defined mode.  
3. You can adjust Brightness, Contrast, Sharpness, Black Light,  
only in personal model.  
6 1  
4 1  
5 0  
4 6  
4 8  
5 0  
S A T U R A T I O N  
S H A R P N E S S  
B L A C K L I G H T  
C O L O R T O N E  
Remote Control Shortcut Keys  
W A R M  
Smart Picture : SMART P  
Press SMART P key on the remote control. You can switch  
the function among the "STANDARD", "DYNAMIC", "SOFT",  
"PERSONAL" four states .  
MENU  
E X I T :  
P I C T U R E  
S E L E C T :  
A D J U S T :  
16:9: Press 16:9 key on the remote control, you can switch the mode among the "FULL", "ZOOM", "ZOOM2",  
"NORMAL" and "PANORAMA"  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option  
PICTURE MODE Select picture mode  
Function  
Description  
"STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four states.  
Adjust the contrast of whole  
picture  
Increasing analog value increases Contrast;  
CONTRAST  
BRIGHTNESS  
HUE  
Decreasing analog value decreases Contrast(0-100).  
Adjust brightness and blackness Increasing analog value increases brightness;  
of whole picture  
Decreasing analog value decreases brightness(0-100).  
Increasing analog value increases green;  
Adjust the hue of whole picture  
Decreasing analog value increases purple(0-100).  
Adjust the saturation of whole  
picture  
Increasing analog value increases color;  
SATURATION  
SHARPNESS  
Decreasing analog value decreases color (0-100).  
Adjust the sharpness of whole  
picture  
Increasing analog value increases definition;  
Decreasing analog value decreases definition (0-100).  
Adjust the black light of whole  
picture  
Increasing analog value increases black light;  
BLACK LIGHT  
COLOR TONE  
Decreasing analog value decreases black light (0-100).  
Select color tone mode of the  
picture  
There are three Color Temperature modes,  
"NORMAL", "WARM", "COOL ".  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment  
Select  
to enter the SOUND submenu. Press "Up/Down" key on the remote control or the key "CH+/CH-" on the front  
panel to choose what you need. Press the "Left / Right" key on the remote control or the "VOL+/VOL-" key on the front  
panel to adjust analog value or state (see below table).  
Attention  
1. Normally, the value of 50 is recommended;  
2. The treble or bass analog value which is adjusted by the users  
S O U N D M O D E  
B A S S  
P E R S O N A L  
5 0  
5 0  
2 6  
will be saved under the user-defined mode.  
3. You can adjust bass and treble only in personal mode.  
Remote Control Shortcut Keys  
Smart Sound: SMART S  
T R E B L E  
B A L A N C E  
MUTE: MUTE  
VOLUME: VOL+, VOL-  
MENU  
E X I T :  
S O U N D  
S E L E C T :  
A D J U S T :  
Press SMART S key on the remote control. You can switch the mode  
among the "PERSONAL", "STANDARD","NEWS" and "MUSIC".  
Item  
Function  
Description  
SOUND MODE  
Adjust audio effect mode  
"PERSONAL","STANDARD","NEWS","MUSIC" four states.  
Increasing analog value increases bass;  
Decreasing analog value decreases bass (0-100).  
BASS  
Adjust bass value  
Adjust treblevalue  
Increasing analog value increases treble;  
Decreasing analog value decreases treble (0-100).  
TREBLE  
BALANCE  
Increasing analog value decreasing left volume;  
Decreasing analog value decreases right volume(0-100).  
Adjust balanceof left orright sound  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advance Settings  
Select  
to enter the ADVANCE submenu. Press "Up/Down"key  
on the remote control or the key "CH+/CH-" on the front panel to  
choose what you need. Press the "Left / Right"key on the remote  
control or the " VOL+/VOL-" key on the front panel to adjust analog  
value or state (see below table).  
N R  
W E A K  
O F F  
B L U E S C R E E N  
S C A L E  
N O R M A L  
MENU  
E X I T :  
A D V A N C E  
S E L E C T :  
A D J U S T :  
Option  
Function  
Description  
NR  
Adjust model ofNR  
"WEAK","MIDDLE","STRONG","OFF".  
"ON/OFF", two states.  
BLUE SCREEN  
SCALE  
Open or closeBLUE SCREEN  
Select picture scaleof the picture.  
"FULL", "ZOOM", "ZOOM2", "NORMAL", "PANORAMA",  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Settings  
Select  
to enter the SYSTEM submenu. Press "Up/Down" key  
on the remote control or the key "CH+/CH-" on the front panel to  
choose what you need. Press the "Left / Right"key on the remote  
control or the " VOL+/VOL-" key on the front panel to adjust analog  
value or state (see below table).  
E N G L I S H  
O S D L A N G U A G E  
5 0  
5 0  
H
V
-
-
P O S I T I O N  
P O S I T I O N  
1 0 0  
8
D U R A T I O N  
H A L F T O N E  
S L E E P  
O F F  
R E S E T  
MENU  
E X I T :  
S Y S T E M  
S E L E C T :  
A D J U S T :  
Option  
Function  
Choose OSD menu display language  
Description  
OSD LANGUAGE  
There are many languages to select  
Increasing analog value, OSD menu move toward right;  
Decreasing analog value, OSD menu move toward left (0-100).  
H-POSITION  
Adjust H-position of OSD menu  
Increasing analog value, OSD menu move toward down;  
Decreasing analog value, OSD menu move toward up(0-100).  
V-POSITION  
DURATION  
HALFTONE  
Adjust V-position of OSD menu  
Adjust duration of OSD menu  
Adjust halftone of whole picture  
Increasing analog value, extend duration time of OSD menu; (0-100).  
Increasing analog value increases halftone;  
Decreasing analog value decreases halftone(0-8).  
SLEEP  
RESET  
Set sleep time of the machine  
Resume to setting of factory  
Off,15,30, 45, 60,unite:minute.  
Reset all values to setting of factory.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Telex Network Card SSA 424A User Manual
Timex Clock T025 User Manual
Toro Lawn Mower 4100 D User Manual
Toshiba CRT Television 32 154W User Manual
TROY Group Printer IRD 4200 User Manual
True Manufacturing Company Stereo Amplifier PRECISION 8i User Manual
Ultra electronic Printer Turbo User Manual
Vantec Network Card NexStar DX User Manual
Viking Range VGGT240SS User Manual
Vizio Car Video System M471i A2 User Manual