STEP 7 Set the clock
STEP 5 Connect to phone line
STEP 3 Battery installation
Plug one end of the telephone line cord into the telephone line
jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.
Telephone outlet
1. Press TIME/SET to listen to the current setting.
2. Press TIME/SET again to indicate changes needed.
3. Press CHANGE to change the day, hour, minute, or year.
4. When you hear the correct setting, press TIME/SET to
advance to the next setting.
1. Align the two holes in the plug with the socket pins,
then snap the plug into place. Place the battery in the
compartment with the wires in the upper right corner.
2. Replace cover by sliding it upwards until it clicks into
place.
Quick start guide
mi6879
STEP 1 Check package contents
NOTE:
If you have caller ID service, the time will automatically
be updated with the first incoming call after you
program the year into the system.
Make sure your phone’s packaging includes the following:
STEP 8 Record your outgoing announcement
1. Press SETUP, the system announces “Announcement.
Press PLAY or press RECORD. To continue setup, press
SETUP.”
2. Press REC/MEMO and speak toward the MIC to record an
announcement for up to 90 seconds.
Battery
Handset
Telephone base
3. Press PLAY/STOP
/
( when finished recording).
NOTE:
Telephone line cord
Belt clip
Quick start guide
User’s manual
For complete feature instructions, please refer to your
user’s manual.
Base power adaptor
Wall mount bracket
IMPORTANT!
If your product is not working properly:
1. Refer to your user’s manual.
STEP 6 Making and receiving calls
Making a call
STEP 2 Connect power to telephone base
STEP 4 Charge the battery
Plug the power adaptor into an electrical outlet not controlled
by a wall switch, and the connector into the power jack on
bottom of the telephone base.
1. Place the handset in the telephone base.
•
Press
or SPEAKER and listen for dial tone.
3. Call our customer service at 1-800-595-9511 or 1-800-267-
7377 in Canada.
AC power outlet
•
Dial the phone number.
-OR-
•
•
Dial the phone number.
Press
.
Receiving a call
Press
, SPEAKER, or any dialing key except OFF.
Hanging up
NOTE:
Press OFF or place
the handset in its
telephone base.
•
Use only the power adaptors supplied with your
VTech telephone.
96-006xxx-010-000
Download from Www.Somanuals.com. All Manuals Search And Download.
|