UNIVERSAL REMOTE CONTROL
REPLACES
REMOTES
4
TV
DVD
VCR/PVR
CBL/SAT
EASY SETUP
DIGITAL
READY*
FAVORITE
CHANNEL
MASTER
POWER KEY*
LIMITED
LIFETIME
WARRANTY
*See back for details
URC 4021
USES 2 AAA BATTERIES
Download from Www.Somanuals.com. All Manuals Search And Download.
(NOT INCLUDED)
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programming Device Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Programming A Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programming The Power Key For The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Clearing The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programming Favorite Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Locking Volume Control To One Mode
(Global Volume Lock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Unlocking Volume Control For A Single Device
(Individual Volume Unlock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Unlocking All Volume Control
(Restoring Default Setting ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Clearing Custom Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Restoring Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setup Codes For Cable Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setup Codes For Cable Box/PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setup Codes For DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setup Codes For DVD Player/VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setup Codes For PVRs (or DVRs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes For Satellite Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes For Satellite Receiver/PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes For TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes For TV/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Codes For TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Codes For TV/VCR/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setup Codes For VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The One ForAll 4 Device Universal Remote Control (URC-4021) is
designed to remotely operate up to four home entertainment devices.It
also features intuitive and easy-to-use keys for instant control of DVD and
PVR (or DVR) components.Moreover,its sophisticated technology will
allow you to consolidate your original home entertainment remote
controls into one easy-to-use product. Advanced features include:
•
Intuitive buttons to allow easy access to functions and menus on your DVD
player,PVR (or DVR),and Cable/Satellite devices
•
•
Direct code setup for easy device programming
Step-and-Set code search and CodeVerification for an alternate way to pro-
gram devices
•
•
Power Macro for master on/off control of all of your equipment with a single
keystroke
Volume Lock/Unlock feature to lock or unlock the volume control to one mode
or individual modes
•
•
•
•
Device Key Re-Assignment to remotely control a second (duplicate) device
Channel Scan and Favorite Channel Scan for easy channel surfing
Color-coded keys to quickly locate popular functions
Extensive code library for popular video devices including DVD players and
PVRs (or DVRs)
The URC-4021 remote control requires two (2) new AAA alkaline batter-
ies (not included) and some easy programming to control your devices.
For best results, please read and perform all instructions listed here.Also,
keep this guide for future reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the One ForAll 4 Device
Universal Remote Control (URC-4021) and then study the Key Charts (on
the next two pages) to learn how they function.
To find out what type of devices can be controlled by each device key after
programming,see the Device Table on page 6.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Charts
When the LED (red light) blinks,the remote control is
working and (after programming) is sending signals.
Press VCR/PVR,DVD,CBL/SAT,or TV once to select a
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on or off the selected device.
For master power control,see Programming
A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select channels
(e.g.,009 or 031).
Use TV/VID to switch the TV’s input to view TV or video
programs.
Press ENTER once after entering the channel numbers on
some TVs.
Use GUIDE to display your selected device’s program
guide or setup menu.
Press MENU once to display your selected device’s main
menu.
Use INFO to display the current channel and program or
on-screen directory.
Use EXIT to exit from your selected device’s guide or
menu.
Use the Cursor Keys to move the cursor in the program
guide and menu screens.
Use SELECT (OK) to choose options from your selected
device’s menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels,or after programming,
to scan up to 10 favorite channels.
Use CHL (or CHM) to select the next higher (or lower)
channel.
Press SUBTITLE/CC once to display (or turn off) subtitles or
closed captions,if availableonyourDVDplayeror
cable/satelliteservice.
For a PVR (or DVR),press PVR MENU once to display a
list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOLL (or VOLM) to raise (or lower) the sound vol-
ume.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Use REW,PLAY,FWD,PAUSE,or STOP to control yourVCR,
PVR (or DVR),or DVD player.
For a DVD player,use SKIP F. or SKIP R. to view the next
or previous chapter.
For aVCR,PVR (or DVR),orVOD (if available),use SCAN-
or SCAN+ to quickly scan forward or back through a video
program.Use REPLAY for an instant replay.Use QUICK
SKIP to advance the video program a preset amount (as
set on your device).
Press REC twice to record aVCR or PVR (or DVR) program.
Use SLEEP to set the sleep timer on a selected device if
equipped with this feature.
Use SET for all programming sequences.
Device Table
NOTE: Please refer to the table below when performing the instructions in“Programming
Device Control”on page 8.
After programming,the One ForAll 4 Device Universal Remote Control will
be able to control the following types of devices:
DEVICE KEY
CONTROLS THESE TYPES OF DEVICES
•
•
•
DVD Player
TV/DVD Player Combo
VCR/DVD Player Combo
•
•
•
•
•
VCR
TV/VCR Combo
TV/VCR/DVD Player Combo
VCR/DVD Player Combo
PVR (or DVR)
•
•
•
•
Cable Box (or Converter)
Cable Box/PVR (or DVR) Combo
Satellite Receiver
Satellite Reciver/PVR (or DVR) Combo
•
Television
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING BATTERIES
‚
ƒ
ƒ
„
1.
2.
On the remote control’s back,push the tab and lift off the
battery cover.
Obtain two (2) newAAA alkaline batteries.Match the +
and – marks on the batteries to the + and – marks in the
battery case,then insert the new batteries.
3.
4.
Press the battery cover back into place.The tab should
click when the cover is locked.
Test the remote control by pressing any mode key (e.g.,
TV).If the batteries are inserted correctly,the LED (red
light) will blink.
NOTE:When batteries need replacement, the remote control will stop operating. Remove
the old batteries and insert new ones within 10 minutes to ensure all of your programming
information is restored.
Battery Precautions: Do not mix old and new batteries.• Do not mix alkaline, standard
(carbon-zinc) or rechargeable (nickelcadmium)batteries.• Always remove old, weak or
worn-out batteries promptly and recycle ordispose of them in accordance with Local and
National Regulations.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING DEVICE CONTROL
The One ForAll 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player,a Motorola cable
box,and an RCAVCR.To control devices other than the default brands,per-
form the following steps;otherwise skip this section:
1.
Turn on a desired device (e.g.,VCR or DVD player) and,if
applicable, insert media (e.g.,cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2.
On the remote control,press a device key once (i.e.,VCR/PVR,
DVD,CBL/SAT,or TV).
NOTE: To program control of aVCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After program-
ming aVCR Combo device, you will be able to control channelselec-
tion, volume,andVCRfunctions.
NOTE: To program control of a DVD Player, DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After program-
ming a DVD Combo device,you will be able to control channel selec-
tion, volume,and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3.
4.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device.If performed cor-
rectly, the LED will blink twice.
NOTE:If the LED did not blink twice,repeat steps 2 through 4 and enter
the same code again.
5.
6.
Aim the remote control at the device and press POWER
once.The device should turn off.If it does not,repeat
steps 2 through 5,trying each code for your brand until
you find one that works.If it still doesn’t work,try
Searching ForYour Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Repeat steps 1 through 5 for each device you want to con-
trol. For future reference,write down each working device
code in the following boxes:
VCR/PVR Code:
Device Type:______________
DVD Code:
Device Type:______________
CBL/SAT Code:
Device Type:______________
TV Code:
Device Type:______________
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand,or if your brand is not listed at all,try searching for
your code.
NOTE:Before performing a code search for a DVD player or aVCR,turn on the device and
insert the required media.
For example,to search for a code for your TV:
1.
2.
On the remote control,press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
3.
Enter 9 - 9 - 1.The LED will blink twice.
4.
Aim the remote control at the TV and slowly alternate
between pressing POWER and TV.Stop when the TV turns
off (after pressing POWER).If the device does not have a
Power key,you can substitute another function,such as
digits 0 ~ 9 ,CHL,or PLAY).
NOTE:In the search mode,the remote control will send IR codes from
its library to the selected device,starting with the most popular code
first.
5.
6.
To lock in the code,press and release SET.The LED will blink
twice.
To search for the codes of your other devices,repeat steps
1 through 5,but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
If you have set up the remote control using the Searching ForYour Code pro-
cedure (as above),you may need to find out which four-digit code is operat-
ing your equipment.For example,to find out which code is operating your
TV:
1.
2.
On the remote control,press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
3.
Enter 9 - 9 - 0.The LED will blink twice.
4.
To view the code for the first digit,press 1 once.Wait 3
seconds,count the LED blinks (e.g.,three blinks = 3) and
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is“0”, the LED will not blink.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Repeat step 4 (on the previous page) three more times for
remaining digits.Use 2 for the second digit,3 for the third
digit,and 4 for the fourth digit.Write down the code dig-
its in the remaining TV code boxes on page 8.
To check for codes of other devices,repeat steps 1
through 5 (starting on the previous page),but substitute
the appropriate device key for each device you are check-
ing. Write down the device’s code digits in the appropri-
ate code boxes on page 8.
PROGRAMMING A MASTER POWER MACRO
In its default state,the POWER key on the One ForAll 4 Device Universal
Remote Control will individually power your home entertainment devices
on or off.However,you can also program a Master Power Macro onto the
POWER key that will sequentially turn on or off all the devices with a single
key press.
Programming The Power Key For The Master Power Macro
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 9 - 5.The LED will blink twice.Then press POWER
once.
3.
4.
For the first device you want in the power-on sequence,
press its device key (e.g.,CBL/SAT) once.
Repeat step 3 up to three more times to add desired
devices to the power-on sequence (e.g., VCR/PVR,DVD,and
TV).
5.
To save the settings and exit the program,press and hold
SET until the LED blinks twice,then release SET.
Operating The Master Power Macro
1.
After programming,point the remote control at the
devices and press POWER for at least 2 seconds to sequen-
tially turn on (or off) your devices.
NOTE:When POWER is pressed for less than 2 seconds,a power com-
mand will only be sent to the currently-selected device.This allows
you to still individually power devices on or off.
2.
Devices will turn on (or off) according to your
programmed sequence.
NOTE:The currently-selected device will always turn on or off first,
followed by the remaining programmed sequence.After the master
power sequence has been completed,the remote control will be set to
control the first powered-on device.
NOTE:If one or more devices does not have a POWER key,the power
off/on sequence may be slightly delayed when the remote control signals
the device(s).This action is normal.
continued on next page...
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING A MASTER POWER MACRO (continued)
Clearing The Master Power Macro
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 9 - 5.The LED will blink twice.Then press POWER
once.
3.
Press and hold SET until the LED blinks twice,then release
SET.The Master Power Macro is now cleared.
RE-ASSIGNING DEVICE KEYS
The One ForAll 4 Device Universal Remote Control can be set to control a
second PVR,VCR,or DVD player.For example,to control a TV,a cable box,
and two DVD players,re-assign the unused VCR/PVR key to operate the second
DVD player as follows:
1.
On the remote control,press and hold SET until the LED
(red light) blinks twice,then release SET.
2.
Enter 9 - 9 - 2.The LED will blink twice.
3.
4.
Press DVD once.
Press VCR/PVR once.The LED will blink twice.The VCR/PVR
key is now ready to be set up to control your second DVD
player.See Programming Device Control on page 8.
To re-assign a secondVCR or PVR (or DVR) to the unused DVD key,repeat
steps 1 through 4.However,in step 3 substitute VCR/PVR for DVD,and in step 4
substitute DVD for VCR/PVR.Now the DVD key will be ready to be set up as your
secondVCR or PVR (or DVR).See Programming Device Control on page 8.
NOTE: Only one device can be assigned to an unused device key at a time.
USING CHANNEL SCAN
In the CBL/SAT or TV mode,use the FAV key to start a 3-second scan of all
channels.Or,if programmed,use the FAV key to scan only your favorite
channels to view a desired channel (see Programming Favorite Channel Scan
on next page.)
1.
Press CBL/SAT or TV once.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Press FAV once.
•
If Favorite Channel Scan has been set up,scanning of
favorite channels will start with up to 100 channel changes
or until stopped by pressing any key.
•
If Favorite Channel Scan has not been set up,scanning
will start with the current channel,and continue up to
100 channel changes or until stopped by pressing any key.
3.
To stop scanning channels at any time,press any key
once.
PROGRAMMING FAVORITE CHANNEL SCAN
In the CBL/SAT or TV mode,you can store a list of up to 10 favorite channels,
in any order,that will be immediately scanned when FAV is pressed (see
Using Channel Scan on the previous page).
NOTE:Favorite channels can only be programmed for one mode.After programming,if FAV
is pressed while in another mode,the remote control will start scanning all channels instead
(if applicable to the selected device).
1.
On the remote control,press CBL/SAT or TV once.
2.
3.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 9 - 9 - 6.The LED will blink twice.
4.
5.
Use the keypad to enter a favorite channel number (e.g.,
031).Then press SET once.
NOTE: If the original remote control required pressing an Enter key
to change the channel, also press the ENTER key after the channel
number (e.g., 0 - 3 - 1 - ENTER). On some satellite receivers and cable
boxes, you may need to press the SELECT (OK) key instead of ENTER.
If desired,repeat step 4 for each channel to be stored,up
to a total of 10 channels.
NOTE: If you try entering more than 10 channels, the remote control
will automatically exit programming. To change your favorite chan-
nel list at this point, you will first need to delete the existing list by
performing the steps in“Clearing Custom Programming”on page 14.
Then, perform the instructions in this section once again.
6.
To exit programming with less than 10 favorite channels
stored,press and hold SET until the LED blinks twice.
Otherwise,the remote control will automatically exit the
program after 10 channels have been stored.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING VOLUME LOCK
The One ForAll 4 Device Universal Remote Control is set at the factory for
independent volume control of each selected device.However,you may
change theVolume Lock setting to GlobalVolume Lock so that a device’s vol-
ume will be locked to one mode (e.g.,to control TV volume in all other
modes).After that,if desired,you can perform IndividualVolume Unlock on a
selected device to set its volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 9 - 3 and then press any mode key once (e.g.,TV).
The LED will blink twice.
3.
Now,when you press VOLL,VOLM,or MUTE,the volume of
the selected device (e.g.,TV) will be controlled,regardless
of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1.
After performing GlobalVolume Lock (above),press a desired
mode key where you want volume to be unlocked (e.g.,
DVD) and controlled within its own mode.
2.
3.
Press and and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 9 - 9 - 3 and then press VOLMonce.The LED will
blink four times.
4.
5.
If desired,repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
Now,after you select a device that has volume unlocked
(e.g.,DVD),pressing VOLL,VOLM,or MUTE will control the
device’s volume only in its own mode.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode,VCR volume inVCR/PVR mode,
etc.).
1.
On the remote control,press and hold SET until the LED (red
light) blinks twice,then release SET.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Enter 9 - 9 - 3 and then press VOLLonce.The LED will
blink four times.
3.
Volume will again be independently controlled according
to its default states for all programmed devices.
CLEARING CUSTOM PROGRAMMING
The One ForAll 4 Device Universal Remote Control contains an Operational
Feature Reset program.
If desired,you can use it to clear custom programming,except your setup
codes and reassigned device keys,and reset them to original factory set-
tings. Also see Restoring Factory Default Settings as below.
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 8 - 0.The LED will blink twice.The remote control
will return to normal operation.
RESTORING FACTORY DEFAULT SETTINGS
The One ForAll 4 Device Universal Remote Control also contains a Factory
Reset program that you can use to reset all custom settings and setup codes
to original factory settings.Also see Clearing Custom Programming as above.
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels,Volume Lock, Reassigned Devices, and all
device settings.
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 8 - 1.The LED will blink twice.The remote control
will return to normal operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM:
LED (red light) does not blink when you press a key.
SOLUTION:
PROBLEM:
Replace batteries with two newAAA alkaline batteries.
LED blinks when you press a key,but home entertain-
ment device does not respond.
SOLUTION:
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet
away.
PROBLEM:
SOLUTION:
The unit does not control home entertainment devices
or commands are not working properly.
Try all listed codes for the device brands being set up.
Make sure they can be operated with an infrared remote
control.
PROBLEM:
SOLUTION:
Changing channels does not work.
If originalremoterequiredpressingENTERorSELECTto
changechannels,pressENTERorSELECTonthisremote
afterenteringthechannelnumber.
PROBLEM:
SOLUTION:
Tried Searching ForYour Code method and still could
not find a working code.
Clear the device key as follows: Press and hold SET until
the LED (red light) blinks twice,then release.Next enter
9 - 9 - 2.Then press the device key to be cleared twice.
Now repeat the Searching ForYour Code method on
page 9.
PROBLEM:
SOLUTION:
CHL and CHM do not work for your RCA TV.
Due to RCA design (1983-1987),only the original
remote control will operate these functions.
PROBLEM:
SOLUTION:
No remote control of volume.
See ChangingVolume Lock on page 13 to lock/unlock
volume.
For additional information:
•
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed
to provide a reasonable protection against harmful interference in a residential
installation.This equipment generates,uses,and can radiate radio frequency
energy and if not installed and used in accordance with the instructions,may
cause harmful interference to radio communications.However,there is no guar-
antee that interference will not occur in a particular installation.If this equip-
ment does cause harmful interference to radio or television reception,which can
be determined by turning the equipment off and on,the user is encouraged to
try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment into an outlet or a circuit different from that to which the
receiver is connected.
•
Consult dealer or experienced radio/TV technician for help.
LIMITED LIFETIME WARRANTY
Audiovox Electronics Corporation (the“Company”) warrants to you the original
retail purchaser of this product that should it,under normal use and conditions,be
proven defective in material or workmanship during its lifetime while you own it,
such defect(s) will be repaired or replaced (at the Company’s option) without charge
for parts and repair labor.To obtain repair or replacement within the terms of this
Warranty,the product is to be delivered with proof of warranty coverage (e.g.dated
bill of sale),specification of defect(s),transportation prepaid,to the Company at the
address shown below.ThisWarranty does not cover product purchased,serviced or
used outside the United States or Canada.ThisWarranty is not transferable and does
not extend to costs incurred for installation,removal or reinstallation of the product.
ThisWarranty does not apply if in the Company’s opinion,the product has been
damaged through alteration,improper installation,mishandling,misuse,neglect,
accident,or the simultaneous use of different battery types (e.g.alkaline,standard or
rechargeable).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THISWARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDEDABOVEAND,IN NO
EVENT,SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
ThisWarranty is in lieu of all other express warranties or liabilities.ANY IMPLIED
WARRANTIES,INCLUDINGANY IMPLIEDWARRANTY OF MERCHANTABILITY
OR FITNESS FORA PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THISWARRANTY.IN NO CASE SHALL THE COMPANY BE LIABLE FORANY-
CONSEQUENTIAL OR INCIDENTAL DAMAGESWHATSOEVER.No person or rep-
resentative is authorized to assume for the Company any liability other than
expressed herein in connection with the sale of this product.Some states/provinces
do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclu-
sions may not apply to you.ThisWarranty gives you specific legal rights and you may
also have other rights,which vary from state/province to state/province.U.S.A.:
Audiovox Electronics Corporation,150 Marcus Blvd.,Hauppauge,NewYork 11788
CANADA:Audiovox Return Center,c/o Genco,6685 Kennedy Road,Unit 3,Door 16,
Mississauga,Ontario L5T 3A5
URC-4021
07/08
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
ONE FORALL® is the registered trademark of Universal Electronics Inc.
AudiovoxAccessories Corporation is the Licensee of the ONE FORALL® brand
for NorthAmerica.
Copyright 2004 by Universal Electronics Inc.No part of this publication may be
reproduced,transmitted,transcribed,stored in any retrieval system,or translated
to any language,in any form or by any means,electronic,mechanical,magnetic,
optical,manual,or otherwise,without the prior written permission of Universal
Electronics Inc.
The One ForAll® 4 Device Universal Remote Control is compatible for use in
NorthAmerica,excluding Mexico.
This One ForAll® 4 Device Universal Remote Control is covered by one or more
of the following US Patents:
6,587,067
6,587,067
6,496,135
5,481,256
5,515,052
5,959,751
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
[CÓDIGOS DEL FABRICANTE]
Setup Codes for Cable Boxes
[Códigos de configuración para cajas (convertidores) de cable]
ABC
0003,0008
Pulsar
0000
Americast
Bell South
Digeo
0899
Quasar
0000
0899
Runco
0000
1187
ScientificAtlanta
Starcom
Supercable
Torx
0008,1877
0003
General Instrument 0003,0276
Jerrold
0003,0276
0000
0276
Memorex
Motorola
Pace
0003
0276,1187,1376
0008,1877
0000
Toshiba
Zenith
0000
0000,0899
Panasonic
Paragon
Pioneer
0000
0533,1877
Setup Codes for Cable Box/PVR (or DVR) Combos
[Códigos de configuración para equipo combinado de cable/PVR
(o DVR)]
Americast
0899
Pioneer
1877
1877
0276
0899
Digeo
1187
ScientificAtlanta
Supercable
Zenith
Motorola
Pace
1376,1187
1877
Setup Codes for DVD Players
[Códigos de configuración para reproductores de DVD]
Akai
0695,0899
KLH
0717,0790,1020
1127,1938
0741
Alco
0790
Lenoxx
LG
Apex Digital
0672,0717,0755,0794,0796,
0830,1020,1056,1061
Magnavox
0503,0539,0646,0675,0821,
1268
Audiovox
0790
0717
0571
0695
Blaupunkt
Blue Parade
Broksonic
Marantz
Memorex
Microsoft
Mintek
0539
0695
0522
CaliforniaAudio Labs0490
0717,1472
0521,1521
0741
Denon
0490
Mitsubishi
NAD
DiamondVision
Disney
1316,1609,1610
0675
Nesa
0717
Durabrand
DVD2000
Emerson
Funai
1127
NexxTech
Norcent
Onkyo
1830
0521
1830
0675,0821,1268
0675,1268
073
0503,0627
Panasonic
0490,0503,0703,1362,1462,
1490,1762
Gateway
GE
Philips
0503,0539,0646,0675
0522,0717
0741,0744,1044,1075
0741
Pioneer
Polaroid
PolkAudio
Presidian
Proceed
Proscan
RCA
0525,0571
1020,1061,1316
0539
GoVideo
GoldStar
Gradiente
Greenhill
Grundig
Hitachi
Hiteker
iLo
0490
0675
0717
0672
0539
0522
0573
0522,0571,0717,0790,0822,
1022,1132
0672
1348,1472
0717,1472
1830
Regent
Rotel
1938
0623
Initial
Insignia
Integra
Samsung
0490,0573,0744,0820,0899,
1044,1075
0571,0627
0558,0623,0867,1164
0790
JVC
Sansui
0695
Kawasaki
Kenwood
continued on next page...
continúa en la página siguiente...
0490
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
[CÓDIGOS DEL FABRICANTE]
Setup Codes for DVD Players
[Códigos de configuración para reproductores de DVD]
Sanyo
0695
Technics
Theta Digital
Toshiba
0490,0703
0571
Sharp
0630,0675
0533
Shinsonic
Sony
0503,0695,1045,1154
0503
0533,0864,1033,1431
0821
Urban Concepts
Venturer
Xbox
Superscan
Sylvania
Symphonic
Teac
0790
0675,0821,1268
0675,1268
0790
0522
Yamaha
0490,0539
0503,0741
Zenith
Setup Codes For DVD Player/VCR Combos
[Códigos de configuración para equipo combinado de DVD/VCRs]
Apex Digital
Broksonic
Emerson
Funai
1061
Polaroid
Presidian
RCA
1061
0695
0675
0675
0522,0822
0820,1044,1075
0695
0675
Samsung
Sansui
GoVideo
GoldStar
JVC
0741,0744,1044,1075
0741
Sharp
0630
0867,1164
0741
Sony
0864,1033,1431
0675
LG
Sylvania
Symphonic
Toshiba
Zenith
Memorex
Panasonic
Philips
0695
0675
1762
0503
0675
0741
Setup Codes for PVRs (or DVRs)
[Códigos de configuración para PVR (o DVR) (Videograbadoras
Personales Digitales en Disco Duro)]
Niveus Media
Northgate
Panasonic
Philips
1972
ABS
1972
1972
1972
1972
0739
1972
1972
1972
Alienware
CyberPower
Dell
0616
0618,0739
0880
RCA
DirecTV
Gateway
Hewlett Packard
ReplayTV
Samsung
Sonic Blue
Sony
0614,0616
0739
0614,0616
0636,1972
1972
Howard Computers 1972
HP
1972
Stack 9
Hughes Network
Systems
0739
0739
1972
1972
1972
1972
1972
1972
Systemax
Tagar Systems
Tivo
1972
Humax
1972
Hush
0618,0636,0739
1008,1972
1972
iBUYPOWER
Linksys
Toshiba
Touch
Media Center PC
Microsoft
Mind
Viewsonic
Voodoo
1972
1972
ZT Group
1972
Setup Codes for Satellite Receivers
[Códigos de configuración para receptores de satélite]
DirecTV
1377,0099,0247,0392,0566,
0639,0724,0749,0819,1076,
1108,1142,1392,1442,1609,
1639,1640,1749,1856
Echostar
Expressvu
GE
0775,1005,1505,1775
0775,1775
0392,0566
General Instrument 0869
Dish Network
0775
GOI
0775,1775
Dish Network
System
Hisense
Hitachi
1535
0819
0775,1005,1505,1775
0775,1005,1505,1775
Dishpro
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HTS
0775,1775
Proscan
Proton
0392,0566
Hughes
0749,1442,1749
1535
Hughes Network
Systems
RadioShack
RCA
0869
0749,1142,1442,1749
1535
0392,0566,0855,1392
iLo
Samsung
1108,1142,1276,1377,1442,
1609
Jerrold
0869
JVC
0775,1775
0724
Sony
0639,1639,1640
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
Star Choice
Tivo
0869
0724
1142,1442
0749
Toshiba
UltimateTV
Uniden
US Digital
USDTV
Voom
0749,0790,0819,1285,1749
0856,0869
0869
1392,1640
0724
0247,0701
0724
1535
1535
Philips
0099,0724,0749,0819,1076,
1142,1442,1749
0869
Zenith
1856
Pioneer
1442
Setup Codes for Satellite Receiver/PVR (or DVR) Combos
[Códigos de configuración para equipo combinado de receptores
de satélite/PVR (o DVR)]
DirecTV
1377,0099,0392,0639,1076,
1142,1392,1442,1640
Motorola
0869
Philips
1142,1442
0392
Dish Network System0775,1505
Proscan
RCA
Dishpro
0775,1505
0775,1505
0775
1392
Echostar
Expressvu
Samsung
Sony
1442
0639,1640
0869
Hughes Network
Systems
Star Choice
1142,1442
Setup Codes for TVs
[Códigos de configuración para TVs]
Denon
0145
Admiral
Advent
0093,0463
DiamondVision
Dumont
1996,1997
0761,0783,0815,0817,0842
0017
Aiko
0092
Durabrand
Dwin
0171,0178,0180,0463,1034
Akai
0030,0060,0672,0702,0812
0093
0000
1755
AmericaAction
Anam
0180
Electroband
Electrograph
Emerson
0180
AOC
0030
0154,0171,0178,0180,0236,
0451,0463,1944,1963
Apex Digital
Audiovox
Aventura
Bell & Howell
Bradford
Broksonic
Candle
0156,0748,0765,0767,0879
0092,0180,0451
0171
Envision
ESA
0030
0171,0812
0154
0154
Fisher
0180
Funai
0171,0180
0180
0180,0236,0463
0030
Futuretech
Gateway
GE
1755,1756
0047,0051,0178,0451
0017,0030
0030,0178
0180
Carnivale
Carver
0030
0054
Gibralter
GoldStar
Grunpy
Haier
Celebrity
Celera
0000
0765
Changhong
Citizen
0765
1034
0030,0060,0092
0180
Hallmark
Harman/Kardon
Harvard
Havermy
Hello Kitty
Hisense
Hitachi
iLo
0178
Clarion
0054
CommercialSolutions 0047
0180
Contec
0180
0180
0054
0180
0093
Craig
0451
Crosley
Crown
0748
0145
Curtis Mathes
0030,0047,0054,0060,0093,
0145,0154,0166,0451,0702
1286
CXC
0180
continued on next page...
Daewoo
0092,0451,0672,1661
continúa en la página siguiente...
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
[CÓDIGOS DEL FABRICANTE]
Setup Codes for TVs
[Códigos de configuración para TVs]
Infinity
0054
Pulsar
Quasar
RadioShack
RCA
0017
0051,0250
Insignia
Inteq
1204
0030,0047,0154,0178,0180
0047,0090,0679
0030,0154,0178,0180
0017,0030
0017
JBL
0054
Realistic
Runco
Sampo
Samsung
Sansui
Sanyo
JCB
0000
Jensen
JVC
0761,0815,0817
0053
0030,1755
0030,0060,0178,0702,0812
0463
KEC
0180
Kenwood
KLH
0030
0154
0765,0767
0030,0180
0178,1265
0047,0054,0154,0156,0178
0030,0054,1944,1963
0030,0054
0250
Scotch
Scott
0178
KTV
0178,0180,0236
LG
Sears
0047,0054,0154,0156,0171,
0178
LXI
Magnavox
Marantz
Matsushita
Maxent
Megatron
Memorex
MGA
Sharp
0093
Sheng Chia
Sony
0093
0000
1755
Soundesign
Squareview
SSS
0178,0180
0145,0178
0150,0154,0178,0463
0030,0150,0178
0017,0047,0051
0093,0150,0178,1250
0093
0171
0180
Starlite
0180
Midland
Mitsubishi
Motorola
MTC
Superscan
Supreme
SVA
0093
0000
0748
0030,0060
0180
Sylvania
Symphonic
Tandy
0030,0054,0171,1944,1963
Multitech
NAD
0171,0180
0156,0178
0030
0093
NEC
Tatung
1286,1756
NetTV
Nikko
1755
Technics
Techwood
Teknika
Telefunken
TMK
0051,0250
0030,0092,0178
0748
0051
Norcent
Norwood Micro
NTC
0054,0060,0092,0150,0180
1286
0702
0092
0178
Onwa
0180
TNCi
0017
Optimus
Optonica
Orion
0154,0166,0250
0093
Toshiba
TVS
0060,0154,0156,1265
0463
0236,0463
0051,0250
US Logic
Vector Research
Victor
1286
Panasonic
Penney
0030
0030,0047,0051,0060,0156,
0178
0053
Vidikron
Vidtech
Viewsonic
Vizio
0054
Philco
0030,0054
0178
Philips
Pilot
0054
1755
0030
1756
Pioneer
Polaroid
Portland
Prima
0166,0679
Wards
0030,0054,0178
0156
0765
Waycon
Westinghouse
0092
0000,0451
0761,0783,0815,0817
WhiteWestinghouse 0463
Prism
0051
0047
0178
Yamaha
Zenith
0030
Proscan
Proton
0017,0092,0178,0463,1265
Setup Codes For TV/DVD Player Combos
[Códigos de configuración para equipo combinado de TV/DVDs]
Akai
0695
0830
0695
DiamondVision
Emerson
iLo
1610
Apex Digital
Broksonic
0675,1268
1472
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial
1472
1268
1472
1490
1022
Samsung
Sansui
0899
Magnavox
Mintek
Panasonic
RCA
0695
Sylvania
Toshiba
0675,1268
0695
Setup Codes For TV/VCR Combos
[Códigos de configuración para equipo combinado de TV/VCRs]
Broksonic
1479
Optimus
0162,0593
Citizen
1278
Orion
1479
Colt
0072
Panasonic
Penney
Quasar
RadioShack
RCA
0162
Daewoo
Emerson
Funai
1278
0240,1237
0162
0593,1278,1479
0000
0000
GE
0240,0807
1237
0240,0807
1014
GoldStar
Harley Davidson
Hitachi
Samsung
Sansui
0000
0000,1479
0240
0000
Sanyo
Lloyd's
0000
Sears
0000,1237
0000,1232
0000,0593
0000
Magnasonic
Magnavox
Magnin
Memorex
MGA
0593,1278
0000,0593
0240
Sony
Symphonic
Thomas
Toshiba
Zenith
0162,1237
0240
0845,1145
0000,1479 0000,1479,0479
Mitsubishi
0807
Setup Codes For TV/VCR/DVD Player Combos
[Códigos de configuración para equipo combinado de
TV/VCR/DVD]
Akai
0899
RCA
1132
0630
0821
0821
1045
DiamondVision
Emerson
1609
Sharp
0821
Superscan
Sylvania
Toshiba
Magnavox
Panasonic
0821
1362,1462
Setup Codes For VCRs
[Códigos de configuración para VCRs]
DirecTV
0739
ABS
1972
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
0039
Admiral
Adventura
Aiwa
0048,0209
0000
0000
0037,0043
0037
0000,0037
Alienware
American High
Asha
1972
0032
0035
Emerson
0000,0037,0043,0121,0184,
0209,0593,1278,1479,1593
0240
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
0037
Fisher
0047,0104
0240
Fuji
0035
0104
Funai
0000,0593,1593
0121,0184,0209,1479
Garrard
0000
0037
Gateway
GE
1972
Canon
0035
0035,0060,0240,0807
Carver
0081
GoVideo
GoldStar
Gradiente
Harley Davidson
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
0240
CCE
0072
0037,1237
0000
Citizen
0037,1278
0072
Colt
0000
Craig
0037,0047,0072,0240
0035,0060,0162
0240
0081
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
0072
1972
1972
0047
0045,1278
1972
continued on next page...
continúa en la página siguiente...
Denon
0042
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
[CÓDIGOS DEL FABRICANTE]
Setup Codes For VCRs, continued
[Códigos de configuración para VCRs, continuación]
Hitachi
0000,0042
Protec
0072
Howard Computers 1972
Pulsar
0039
HP
1972
Quasar
RadioShack
Radix
0035,0162
Hughes Network
Systems
0000
0042,0739
0037
Humax
Hush
0739
Randex
RCA
0037
1972
0042,0060,0240,0807,0880
iBUYPOWER
JVC
1972
Realistic
0000,0035,0037,0047,0048,
0104
0067
KEC
0037
ReplayTV
Ricavision
Runco
0614,0616
Kenwood
KLH
0067
1972
0072
0039
Kodak
0035,0037
Samsung
Sanky
0045,0240,0739,1014
0039,0048
Linksys
Lloyd's
1972
0000
Sansui
Sanyo
0000,0067,0209,1479
0047,0104,0240
0043,0045,0121,0184
Logik
0072
LXI
0037
Scott
Magnasonic
Magnavox
Magnin
Marantz
Marta
0593,1278
Sears
0000,0035,0037,0042,0047,
0104,1237
0000,0035,0039,0081,0593
Sharp
0048,0807
0072
0240
Shintom
Shogun
Singer
0035,0081
0037
0240
0072
Matsushita
Media Center PC
MEI
0035,0162
1972
Sonic Blue
Sony
0614,0616
0000,0032,0035,0636,1232,
1972
0035
Memorex
0000,0035,0037,0039,0047,
0048,0104,0162,0209,0240,
1237
Stack 9
STS
1972
0042
MGA
0043,0240
Sylvania
0000,0035,0043,0081,0593,
1593
MGN Technology 0240
Symphonic
Systemax
Tagar Systems
Teac
0000,0593,1593
1972
Microsoft
Mind
1972
1972
1972
Minolta
Mitsubishi
Motorola
MTC
0042
0000
0043,0067,0807
0035,0048
0000,0240
0000,0072
0067,0104
0037
Technics
Teknika
Thomas
Tivo
0035,0162
0000,0035,0037
0000
Multitech
NEC
0618,0636,0739
0240
TMK
Nikko
Toshiba
0043,0045,0209,0845,1008,
1145,1972,1503
Niveus Media
Noblex
1972
0240
Totevision
Touch
0037,0240
1972
Northgate
Olympus
Optimus
1972
0035
Unitech
0240
0037,0048,0104,0162,0593,
1062
Vector
0045
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
0045
Orion
0184,0209,1479
0037
Panasonic
Penney
Pentax
0035,0162,0616,1062
0240
0035,0037,0042,0240,1237
1972
0042
0000
Philco
0035
Voodoo
1972
Philips
0035,0081,0618,0739
Wards
0000,0035,0042,0047,0048,
0060,0072,0081,0240
Pilot
0037
0067
0081
1593
0240
0060
Pioneer
PolkAudio
Presidian
Profitronic
Proscan
WhiteWestinghouse 0072,0209
XR-1000
Zenith
0000,0035,0072
0000,0039,0209,1479
1972
ZT Group
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|