m
e
u
i
n
t
OK
rdl/p
DECT
n
clr
power
charge
in use
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
1811
pqrs
tuv
wxyz
7
9
page
#
0
*
DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS
OWNER’S
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is a very condensed version of your
owners manual and does not attempt to explain
any of the advanced features of your phone.
Installation
A simple guide to setting
up your new phone.
DECT1811
TEL PWR
Start
Here!
Line in
from
Telephone
Jack
Quick Reference Guide
Australia
New
Zealand
AC
Adaptor
Plug the phone jack into the base unit, then
into the telephone connector on the wall.
Plug the power cable into the base unit, then
into the wall outlet.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
Using the Phone
To make a call
1. Press talk [
Installing the Handset Batteries
] and listen for the dial tone.
Press battery cover release.
Slide cover off.
2. Dial phone number.
OR
1. Dial phone number
2. Press the talk [
] key.
To hang up
Press talk [
] or place the handset back on
the base unit.
Install the 3 rechargeable Ni-MH
batteries.
To answer a call
Handset on the base unit: Remove handset from
the base and speak
Handset off the base unit: Pick up handset, press
-
the talk [
] key and speak
+
-
To store a number:
• in Standby Mode, enter the telephone
number you wish to store and press [OK].
Slide the battery cover back
until it snaps into place
•
NAME? will be displayed.
• enter the name of the person with this
number in the same way that you entered the
letters of your user name (page 17).
• press [OK] key.
•
ADDRESS:XX will be displayed.
• press [OK] key.
Place the handset on the base and
charge uninterrupted for 14 hours.
• the phone number is now stored in the memory.
To phone a stored number:
• press [OK] key to enter the phone book.
• press [menu] to scroll through the names in
your phone book.
• when you reach the one you wish to call, press
talk [
automatically.
] and the number will be dialled
Only use the battery pack supplied or rechargeable AAA
Ni-MH Batteries.
DO NOT USE STANDARD BATTERIES.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Handset and Base Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Step 1 - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Step 2 - Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Step 3 - Using the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Included in your Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description of Handset Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description of Displayed Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Making External Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Receiving Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Finding the Handset (Page) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Range Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Keypad Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Call Barring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Call Waiting and Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Flash (Call Waiting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
View Calls in Caller ID Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Delete one number from memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Delete all Caller ID numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Store a Caller ID number in your personal Phone Book . . . . . . . . . . . . . 12
Call a number in Caller ID Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Personalising Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ear Piece Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Handset External Ring Melody and Volume . . . . . . . . . . . . . . . . . . . . . . . 13
User Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Direct Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Handset Internal Ring Melody and Volume . . . . . . . . . . . . . . . . . . . . . . . 15
Key Click Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Base Unit External Ring Melody and Volume . . . . . . . . . . . . . . . . . . . . . . 15
Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Resetting your Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Outside Line Pause (PABX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Registering a Handset to a Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Selecting a Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Insert Zero Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Deregistering a Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Show RFPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Flash Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Handset PIN Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Resetting your Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Base Unit PIN Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on your purchase of the Uniden DECT 1811 cordless
telephone. This phone is designed for reliability, long life and outstanding
performance utilising the latest in 1.8 GHz Digital Enhanced Cordless
Telecommunication technology.
FEATURES
✃
✃
✃
1.8 GHz Digital Enhanced Cordless Telecommunications (DECT)
Last 3 Number Redial
20 Phone Number Memory
(20 digits maximum per memory)
✃
✃
✃
✃
✃
✃
✃
✃
✃
✃
✃
✃
Redial, Flash, Pause and Mute
Tone Dialling
Extendible to 5 handsets and 4 bases
Internal Calling between handsets
Internal and External Call Transfer
Call Barring
Call Timer
200 Hours Standby Battery Time
10 Hours Talk Time
Handset Earpiece and Ringer Volume Control
Base Ringer and Volume Control
Hearing Aid Compatible
AutoTalk™
✃
✃
✃
✃
✃
✃
✃
✃
✃
✃
✃
AutoStandby™
Page
Caller ID
Name Tagging
Advanced PABX features
9 Handset Ringer Tones
Keypad Lock
Gap Compatible
Low Battery Indicator
Up to 50m Indoor Range up to 300m Outdoor Range
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
power
charge
in use
m
i
n
t
e
n
u
OK
rdl/p
clr
To get the most from your
phone, please read this
owner’s manual thoroughly.
Be sure to complete and mail
the product registration form.
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
page
pqrs
tuv
wxyz
#
7
9
0
*
DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS
Handset
Base
If any of these items are
missing or damaged, contact
your place of purchase
immediately.
AAD 1811
AC Adaptor
Rechargeable Battery
Long Telephone
Cord/Plug
Long Telephone Cord
(NZ Only)
(Australia Only)
Belt Clip
2 x Memory Stickers
✃
This Owner’s Manual
Registration Card
and other printed materials
3
✃
✃
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, these basic safety precautions
should always be followed to reduced the risk of fire, electrical shock,
and injury:
1. UNIDEN DOES NOT represent this unit to be waterproof.
To reduce risk of fire, electrical shock or damage to the unit, DO NOT expose
this unit to rain or moisture. Never spill liquid of any kind on the product.
2. Do not use this product near water; for example, near a bathtub, shower,
washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
This symbol indicates
important operating and
servicing instructions.
3. Do not overload wall outlets and extension cords, as this can result in the risk
of fire or electrical shock.
4. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. If the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the operating
instructions. (Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage,
and will often require extensive repair work by a qualified technician).
E. If the product has been dropped, or the base unit has been damaged.
F. If the product exhibits a distinct change in performance.
5. Do not use the telephone to report a gas leak in the vicinity of the leak.
6. Rechargeable Nickel-Metal Hydride Battery Warning
•
The rechargeable Ni-MH battery contained in this
equipment may explode if disposed of in fire.
•
Do not charge the rechargeable Ni-MH battery used in this equipment in
any other charger.
8. Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Please do not attempt to
unplug any appliance
during an electrical storm.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION CONSIDERATIONS
✃✃ Selecting a Location
Before choosing a location for your new phone, here are some important
guidelines you should consider:
✃
The location should be close to both
a phone jack and a power outlet.
✃
Keep the base and handset away from
sources of electrical noise such as
motors and fluorescent lighting.
✃
✃
You should charge the battery in your handset for 14
hours before connecting the phone line.
Most phone equipment available now uses modular jacks. Phone cords are
fitted with a plastic connector which plugs into this type of jack. If you do not
have a modular phone jack, contact your local telephone company for
information about their installation.
During a power failure, this telephone will not operate.
Please ensure that a separate phone, not dependent on local
power, is available for emergencies.
More Than One Phone
Each telephone device that you connect draws power from the phone line. We refer
to the power drawn as the device’s Ringer Equivalence Number (REN). The REN is
shown at the bottom part of your telephone. If you are using more than one phone
or other device on the line, add up all the RENs. If the total is more than 3, your
phones might not ring.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF HANDSET KEYS
[OK]
Phone book: Short dialling phone book access in the Standby Mode and Talk Mode
Function Select Key: Select various functions
Refer to inside front cover
for handset picture and key
location.
[menu]
Menu: Enter/ confirm programming functions in the Standby Mode
Recall (Flash): Recall in the Talk Mode
[clr]
Microphone Mute Key: Press and hold in the Talk Mode
Dial Delete Key: Press in the Standby Mode
Menu Escape Key: Press and hold in the Standby Mode
Memory Clear Key: Clear the allocated memory in the Standby Mode
[rdl/p]
Redial: Last number dialled
Pause: Pause before dialling the next digit
[int]
Internal Set Up: An Internal call
Call Transfer: Transfer an external call in the Talk Mode
Talk Key: Press to begin or end a call
Menu Escape Key: Escape menu function in the Standby Mode
Power Key: Press and hold to switch phone on/off in Standby Mode
Lock Key: Press to lock keys in Standby Mode
Ear Volume Key: Adjust ear volume level in the Talk Mode
Special Keys
Asterisk Key
Asterisk: Special dial digit in the Talk Mode.
✃ Menu Scroll Up Function
Hash Key
Hash: Special dial digit in the Talk Mode.
✃ Menu Scroll Down Function
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF DISPLAYED SYMBOLS
EXT INT
1
2
3
4
5
6
Display Symbols
1 .
ANTENNA :
✃
The ANTENNA symbol shows the handset is searching for radio connection.
2 .
TALK:
✃
The TALK symbol appears when pressing the Talk (
) switch to initiate a call.
EXT
3 .
✃
EXTERNAL CALL:
The EXT symbol is used for external calls. An external call set-up is displayed on all
the subscribed handsets to indicate whether another external call might be set up.
INT
4 .
✃
INTERNAL CALL:
The INT symbol is used for internal calls between handsets. It is displayed only on
the corresponding handsets.
5 .
BATTERY :
✃
The BATTERY symbol indicates the charge status of the battery.
Battery Symbol On(Low battery) / Battery Symbol Off (Full battery state)
6 .
LOCK :
✃
The LOCK symbol is displayed in the Lock Mode.
The handset can only receive incoming calls.
All keys are inactive except for Power key.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR PHONE
MAKING EXTERNAL CALLS
There are several ways to make an external call using your DECT 1811 phone.
1. Press talk [
] key on the handset. Enter the number you require and you
will be connected automatically.
2. Enter the number you require. The number will appear on the LCD but won't
be dialled. You can edit the number by using the [clr] key. Press talk [
]
to dial the number entered.
3. Press [OK] to call a number stored in your phone book.
4. You can use the [rdl/p] key if the number you wish to dial is one of the last three
dialled numbers which are stored in the redial memory. Press [rdl/p] until you
reach the number you wish to redial. Press talk [
] to dial the number.
MAKING INTERNAL CALLS
Make an internal call to another handset by pressing the [int] key followed by the
number of the handset. Press the talk [
] key to end an internal call.
ENDING CALLS
Press talk [
] to end a call.
RECEIVING INCOMING CALLS
1. If the handset rings when it is off the base unit, press talk [
] to answer
the call.
2. If the handset rings when it is on the base unit, simply lift the handset from
the base unit and speak using the AUTO TALK feature. It is not necessary to
press the [TALK] [
] key.
CALL DURATION
The length of your call will be displayed at the left of the LCD after the call has
lasted for 10 seconds. When the call has ended, call duration will be displayed for
a further 2 seconds.
MUTE
During a call, you can mute your voice so the caller cannot hear you. To do this,
press and hold the [clr] key. To unmute, press and hold the [clr] key again.
FINDING THE HANDSET
If you misplace the handset, press the [PAGE] key on the base unit. The handset will
ring 8 times and this should help you locate it. To stop the ringing once the handset
has been found, either replace the handset on the base unit or press talk [
].
8
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER KEY
Press and hold the power [ ] key to turn the handset power on or off. In most
situations it is recommended to leave the power on the handset at all times so
calls can be received.
RANGE OUT
If RANGE OUT appears on your LCD, your handset is out of range of the base unit
and will not be functional until you move back into range.
BATTERY
A warning tone will sound and the low battery symbol will appear on the LCD if
the battery is in a low state.
KEYPAD LOCK
To lock the keypad but still receive calls, press power [ ] . The same key is used
to unlock the keypad.
CALL BARRING
Call barring makes it possible to stop individual handsets from dialling numbers
starting with a certain prefix, such as toll calls or 0900 numbers.
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] to scroll through until you
reach BARRING.
• press [OK] key to choose this option.
•
FP PIN: will be displayed.
• enter your PIN number and press [OK] key.
NO 1: EMPTY will be displayed.
•
• enter the prefix (up to five digits) you wish
to bar.
• press [OK] key.
•
HANDY will be displayed. Key in the number
of the handset which should use this call
barring function.
• press [OK] to confirm.
• press talk [ ].
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONE BOOK
You can store up to 20 frequently called numbers in your handset's phone book.
Each number can have up to 20 digits.
To store a number:
• in Standby Mode, enter the telephone
number you wish to store and press [OK].
•
NAME? will be displayed.
• enter the name of the person with this
number in the same way that you entered
the letters of your user name (page 17).
• press [OK] key.
•
ADDRESS:XX will be displayed.
• press [OK] key.
• the phone number is now stored in the memory.
To delete a stored number:
• press [menu] key once followed by the [*]
key twice to reach the PHONE BOOK
display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] to scroll through the names
in your phone book.
• delete a name by pressing the [clr] key.
•
DELETE MEM? will be displayed.
• press [OK] to confirm.
• press talk [ ].
Pause
Use the [rdl/p] key to introduce a fixed delay during dialling. This key is used to
dial a pause in situations such as storing numbers to access telebanking or voice
mail. It must not be the first character of a number because in that case it would
be interpreted as the redial key.
To phone a stored number:
• press [OK] key to enter the phone book.
• press [menu] to scroll through the names in your phone book.
• when you reach the one you wish to call, press talk [
] and the
number will be dialled automatically.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL WAITING AND CALLER ID
If you have subscribed to Call waiting and/or Caller ID through your local
telephone company, the following special features are available on your
DECT 1811 telephone.
You must subscribe to Caller
ID and Call Waiting through
your telephone company.
Flash (Call waiting)
If the call waiting tone sounds while you are on a call:
New Zealand
• press [menu] to switch between callers.
Australia
• press [menu] and number 2 to switch between callers.
Caller ID
Caller ID subscribers will see the phone number of an incoming call displayed on
the handset's LCD. This number will be stored automatically in the Caller ID
memory. The Caller ID memory can be edited in several ways.
View calls in Caller ID memory
• press [menu] key and CALLER ID will be
displayed on the LCD.
• press [OK] key to choose this menu item.
• the number of the last received phone call will be displayed.
• press [OK] again to display the time and date the call was received.
• scroll between calls in the memory using the [#] and [*] keys.
Name Tagging
If you have stored a name and number in the Phone Book. When you receive a
call from that number the name will be displayed on the LCD.
Delete one number from the memory
• press [menu] key and CALLER ID
will be displayed in the LCD.
• press [OK] key to choose this menu item.
• the number of the last received phone call
will be displayed.
• use the scrolling keys mentioned above to
select the number you wish to delete.
• press [clr] and DELETE MEM? will be displayed.
• press [OK] to delete this number.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete all Caller ID numbers from the memory
• press [menu] key and CALLER ID will be
displayed in the LCD.
• press [OK] key to choose this menu item.
If you have stored a name
and number in your phone
book, when you receive a call
from that number the name
will be displayed on your LCD.
• press [clr] and DELETE MEM? will be
displayed.
• press [menu] and DELETE ALL will be
displayed.
• press [OK] to clear the Caller ID memory.
Store a Caller ID number in your personal phone book
• press [menu] key and CALLER ID will be
displayed in the LCD.
• press [OK] key to choose this menu item.
• use the scrolling keys mentioned earlier to
select the number you wish to store in the
phone book.
• press [clr].
• press [menu] twice.
•
INSERT PB? will be displayed.
• press [OK] to display NAME?
• enter the name for that phone number and
press [OK].
•
ADDRESS:XX will be displayed.
• press [OK] key.
Call a number in your Caller ID memory
• press [menu] key once.
• press [OK] key to choose this menu item.
• use the scrolling keys mentioned earlier to select the number you wish to call.
• press talk [
] to call the number.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONALISING YOUR PHONE
EARPIECE VOLUME
1. To change the earpiece volume during a call, press the power [ ] key on the
handset.
2. To change the earpiece volume in Standby Mode
• press [menu] key until you reach the
EAR VOLUME display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the
three earpiece volume choices: VOL LOW;
VOL MIDDLE; VOL HIGH.
• press [OK] key to confirm your preferred volume.
• press [TALK] [
].
HANDSET EXTERNAL RING MELODY
Nine external ring melodies are available.
• press [menu] key until you reach the
H-EXT RING display on the LCD.
• press [OK] key to choose this menu item.
•
MELODY will be displayed.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the
melody options.
• press [OK] key to confirm your preferred melody.
• press [TALK] [
].
HANDSET EXTERNAL RING VOLUME
Nine external ring volumes are available.
• press [menu] key until you reach the
H-EXT RING display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key to choose the external
ring volume option.
•
VOLUME will be displayed.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the volume options.
• press [OK] key to confirm your preferred volume.
13
• press [TALK] [
].
Download from Www.Somanuals.com. All Manuals Search And Download.
USER NAME
You can programme your handset to display your name (up to a maximum of 10
letters). Look at this example for the user name FRED first.
• press [menu] key once and then press [*]
three times to reach the USER NAME
display on the LCD.
• press [OK] key to choose this menu item.
•
NAME? will be displayed.
• to key in the name FRED the following
keys are pressed.
• press [3] three times until [F] is displayed.
• press [7] three times until [R] is displayed.
• press [3] twice until [E] is displayed.
• press # key to make it possible to key in another letter from the same
numerical key.
• press [3] once and [D] will be displayed.
• press [OK] key to confirm the user name and escape menu.
•
FRED 1 will now appear on the LCD when power is switched on.
Follow the above example to key in your own user name and press [OK] to confirm.
DIRECT CALL
The direct call option on your handset can be used to dial a specific number which
you have saved, no matter what key is pressed. This feature provides easy one touch
any key dial access to call a relative or emergency service. Only one direct call
number can be programmed for each handset and only for external outgoing calls.
• press [menu] key until you reach the
DIRECT CALL display on the LCD.
• press [OK] key to choose this menu item.
•
PHONE NUMBER will be displayed.
• insert the direct call phone number you
have chosen.
• press [OK] key to confirm.
• to exit from this menu option, press the [clr] key twice in quick succession.
Leaving your handset in direct call mode
Leave your handset in the direct call mode when you want to have the option of
dialling the programmed direct call number using any one key on the handset.
• press [menu] key until you reach the
DIRECT CALL display on the LCD.
• press [OK] key twice.
14
• your handset is now in direct call mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET INTERNAL RING MELODY AND VOLUME
If you will be receiving internal calls from your an optional DECT1811 Handset,
you can programme a different ring melody and volume to show that the call is
an internal one. Simply press [menu] key until you reach the H-INT RING
display on the LCD and then follow the instructions as for setting up volume and
melody for external calls.
KEY CLICK OPTION
You can adjust the handset to click or not click when each key is pressed.
• press [menu] key until you reach the
H-KEY CLICK display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the
CLICK ON and CLICK OFF options.
• press [OK] key to confirm your choice.
• press talk [
].
BASE UNIT EXTERNAL RING MELODY
The base unit only rings on incoming external calls. It can be programmed to
your preferred melody.
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key until BASE MELODY
is displayed on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the melody options.
• press [OK] key to confirm your preferred melody.
• press talk [
].
BASE UNIT EXTERNAL RING VOLUME
The base unit can be programmed to your preferred volume.
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key until BASE VOLUME is
displayed on the LCD.
• press [OK] key to choose this menu item.
• press [menu] key to scroll between the volume options.
• press [OK] key to confirm your preferred volume.
15
• press talk [
].
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
RESETTING YOUR BASE UNIT
The base unit can be reset to default factory values. RESET ALL will desubscribe
all connected handsets and put the base unit into subscription mode. INITIALIZE
will reload default parameters which are:
Base unit ringer volume:
Base unit ringer melody:
Dialling mode:
level #9
melody #4
DTMF dialling
Flash time:
600ms New Zealand, 100ms Australia
Call barring:
all barred numbers and the assigned
handsets are cleared
Reset your base unit as follows:
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
RESET
• press [menu] key until BASE RESET is
displayed on the LCD.
• press [OK] to choose this option.
•
FP PIN: will be displayed.
• enter your 4 digit PIN number and press
[OK]. (Factory default is 1590).
RESET ALL
• press [menu] key to scroll between
RESET ALL and INITIALIZE options.
• press [OK] when you have chosen your
preferred reset option.
• press talk [
].
OUTSIDE LINE PAUSE (PABX)
The base can be programmed to insert a 3 second Pause after the first digit. This
is for accessing an outside line through a PABX.
• press [menu] key followed by [*] key and
PABX SETTING will be displayed on the LCD.
• press [OK] key to choose this menu item.
•
PABX SET 1 will be displayed.
• press [OK].
• key in the digit you wish to use to activate the Pause.
• press [OK] key.
16
• press talk [
].
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTERING A HANDSET TO A BASE UNIT
Each handset must be registered to a base unit in order to make and receive calls.
The DECT 1811 is automatically registered to the first base unit for you.
A handset can be registered to up to four base units.
• press and hold the [PAGE] key on your base until ringing begins (5-10 seconds).
You will then be ready to register another handset to your base unit.
• press [menu] key until you reach the
H-REGISTER display on the LCD.
• press [OK] key to choose this menu item.
H-REGISTER
•
SEARCH BS 1 will be displayed.
• press [menu] key to scroll between base units
2-4 (any available base number is OK).
• press [OK] to confirm your choice.
• the RFPI code will be displayed after a short wait.
• press [OK] to confirm.
• enter your base unit PIN number and press [OK].( Factory default is 1590).
SELECTING A BASE UNIT
If your handset is registered to several base units, the selection of the most
appropriate base unit can be done manually or automatically.
• press [menu] key until you reach the
If your handset has not been
subscribed to your chosen
SELECT BASE display on the LCD.
• press [OK] key to choose this menu item.
base unit, NOT SUB: will
be displayed. In this case, try
again by choosing another
base or subscribe the
•
BASE NO: 1 will be displayed.
• press [menu] key to scroll between base units
1-4 or AUTO.
handset to the new base first.
• press [OK] to confirm your choice.
• press [OK] to register to this new base unit.
INSERT ZERO CALLER ID
(Default: New Zealand On, Australia Off)
If you are subscribed to a telephone network that does not require a zero inserted
for Caller ID switch off as follows:
You must subscribe to Caller
ID and Call Waiting through
your telephone company.
• press [menu] key until you reach the
EAR VOLUME display on the LCD.
• press [OK] key to choose this menu item.
• press [menu] until you reach VOL MIDDLE.
• press # then number 4 key.
• press talk [
].
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DEREGISTERING A HANDSET
You can delete a handset registration from a base unit using handset 1 only.
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
Handset 1 cannot
desubscribe itself.
• press [menu] key until you reach the
HANDY DESUB option.
• press [OK] to choose this option.
• press [menu] to choose the handset you wish to deregister.
• press [OK] to deregister the handset.
• press talk [
].
SHOW RFPI
This function displayed the RFPI (radio fixed
part identity) of the base unit currently locked
to the handset.
• press [menu] until you reach the SHOW RFPI
display on the LCD.
• press [OK] key to choose this menu item.
• the code will be displayed.
• press talk [
].
FLASH PROGRAMMING
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] to choose this menu item.
• press [menu] until FLASH TIME is displayed.
• press [OK] to choose this option.
• press [menu] to change the value.
40mS - 600mS
• press [OK] at your chosen value.
• press talk [
].
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSET PIN NUMBER
Your handset will be set to the default PIN number setting of 1590. You can also
choose your own PIN number.
• press [menu] key until you reach the
H-CHANGE PIN display on the LCD.
• press [OK] key to choose this menu item.
WARNING!
Uniden does not recommend
changing the PIN number.
If you forget your PIN
number there is no way to
reset the telephone.
•
PP PIN: will be displayed.
• enter 1590 and press [OK].
NEW PIN: will be displayed.
•
• enter your new 4 digit PIN number and
press [OK].
•
RETYPE: will be displayed.
• confirm you new PIN number by entering
RETYPE:
the same 4 digits and press [OK].
• if you have entered the same new PIN
number twice, you will be returned to the menu. Press talk [
].
• if you accidentally entered a different 4 digit number, RETYPE: will appear
again.
RESETTING YOUR HANDSET
There are two options for resetting the personalised items on your handset. RESET
ALL will erase all memory entries. INITIALIZE will reload default parameters
which are:
Key Click:
ON
Ringer volume:
level #9
External ringer melody:
Internal ringer melody:
Earpiece volume:
ringing tone #4
ringing tone #7
MIDDLE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset your handset as follows:
• press [menu] key until you reach the
H-RESET display on the LCD.
• press [OK] key to choose this menu item.
H-RESET
•
PP PIN: will be displayed.
RESET ALL
• enter your 4 digit PIN number and press
[OK].
• press [menu] key to scroll between RESET
ALL and INITIALIZE options.
• press [OK] when you have chosen your
preferred reset option.
• press talk [
].
BASE UNIT PIN NUMBER
Your base unit will be set to the default PIN number setting of 1590. You can also
choose your own PIN number.
• press [menu] key until you reach the
BASE SETTING display on the LCD.
• press [OK] key to choose this menu item.
WARNING!
Uniden does not recommend
changing the PIN number.
If you forget your PIN
number there is no way to
reset the telephone.
• press [menu] key until B-CHANGE PIN
is displayed on the LCD.
• press [OK] key to choose this option.
•
FP PIN: will be displayed.
• enter the PIN number and press [OK].
Factory default if 1590.
•
NEW PIN: will be displayed.
• enter your new 4 digit PIN number and
press [OK].
•
RETYPE: will be displayed.
• confirm your new PIN number by
entering the same 4 digits and press [OK].
• if you have entered the same new PIN number twice, you will be returned
to the menu. Press talk [
].
• if you accidentally entered a different 4 digit number, RETYPE: will
appear again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
If your phone is not performing to your expectations, please try these simple steps first
before calling Uniden customer service.
PROBLEM
SUGGESTION
✃
✃
✃
Make sure the AC adaptor is plugged into the base and
wall outlet.
Make sure the handset is sitting correctly
in the base.
Make sure the charging contacts on the handset and base
are clean.
The charge light
won’t come on
when the handset
is placed on
the base.
✃
✃
✃
✃
Move the handset and/or base to a different location away
from metal objects or appliances and try again.
The handset rechargeable Ni-MH battery may need to be
charged.
You may be out of normal operating range. Move closer to
the base unit.
Move the base unit so that it is centrally located in your
residence or office and not near appliances.
The audio sounds
weak and/or
scratchy.
✃
✃
✃
Check both ends of the base telephone line cord are
firmly pushed in until they click.
Make sure the AC adaptor is plugged into the base and
wall outlet.
Disconnect the AC adaptor for a few minutes, then
reconnect it.
Can’t make or
receive calls.
✃
✃
Place the handset back on the base unit for a few seconds.
The Ni-MH battery pack may be weak. Charge the battery
for 14 hours.
✃
The handset may be too far away from the base. Place the
base away from appliances or metal objects.
The handset
doesn’t ring or
receive a page.
✃
✃
Place the handset back on the base unit for a few seconds.
You may have exceeded the Ringer Equivalence Number
(REN) limit of how many phones can be connected to the
same line. The REN total of all devices (printed on the label
on the bottom of each unit) should not exceed three (3).
Disconnect the appropriate units to lower the REN total.
✃
✃
Check the Ni-MH battery connection inside the battery
compartment on the handset.
The handset rechargeable Ni-MH battery pack may need
to be charged.
No power on
handset unit
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Operating Technology
TDMA (Time Division Multiple Access)
ADOCM (Adaptive Differential Pulse Code Modulation)
DCA (Dynamic Channel Allocation)
BASE UNIT
Frequency: 1881.792 to 1897.344 MHz (10 channels)
Power requirements: 9V DC 200mA, 9V AC 100ma
Size: 78mm (W) x 119mm (H) x 156mm (D)
Weight: Approx. 170g
HANDSET
Frequency: 1881.782 to 1897.344 MHz (10 channels)
Power requirements: Rechargeable NiMH battery
Size (without antenna): 45mm (W) x 27mm (H) x 135mm (D)
Weight: Approx. 93g (without battery)
Battery:
Capacity
550 mAH, 3.6V x 3 (AAA size)
10 hours
Talk mode
Standby mode 250 hours
Charging time 14 hours
Specifications and features are all subject to change without prior notice.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
One Year Limited Warranty
Important:
Warrantor:
Evidence of original purchase is required for warranty service.
Uniden Australia Pty Limited ACN 001 865 498
Uniden New Zealand Limited
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration
of this warranty, its DECT1811(herein after referred to as the Product), to be free from
defects in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall terminate
and be of no further effect 12 months after the date of original retail sale. This warranty will
be deemed invalid if the product is; (A) Damaged or not maintained as reasonable and
necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) Improperly installed, (D) Repaired by someone
other than an authorised Uniden Repair Agent for a defect or malfunction covered by this
warranty, (E) Used in conjunction with any equipment or parts or as part of a system not
manufactured by Uniden, (F) Warranty is only valid in original country of purchase.
PARTS COVERED: This warranty covers for one (1) year, the Base Unit and Handset only.
All accessories (AC Adaptor, Belt Clip etc)are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, the warrantor at its discretion, will
repair the defect or replace the product and return it to you without charge for parts or
service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN
ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE
CONSUMER GUARANTEE ACT.
WARRANTY CARD: If a warranty card has been included with this product then please
fill it in and return to us within 14 days of purchase. Your name and the Serial number of
the product will then be registered in our database and this will help us process your claim
with greater speed and efficiency should you require warranty service.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that
the product does not conform to this warranty, the Product should be shipped or delivered,
freight pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the
warrantor at:
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
Rockdale NSW 2216
Ph (02) 9599 3577 Fx (02) 9599 3278
Toll Free 1300 366 895
East Tamaki, Auckland
Ph (9) 273 8383 Fx (9) 274 4253
Toll Free 0800 4 UNIDEN
4 864 336
Customers in other States should ship or deliver the Product freight pre-paid to their nearest
Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2001 Uniden Australia Pty Limited
Uniden New Zealand Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|