®
Workman HD Series
f
e
a t u
r
e S
Get more work done
• Industry leading hauling and towing
capacity:
every day with confidence.
– 2,899 lb (1,318kg) total capacity – HDX
– 2,894 lb (1,313kg) total capacity – HDX-D
– 3,500 lb (1,587kg) towing – all models
®
The new Workman HD Series is designed with your toughest work challenges
in mind, from the front bumper to the rear bumper and everything in
between. Design components like an I-beam shaped DeDion rear axle,
a truss-like front space frame, integrated wheel bearings and hydraulic disk
brakes on all four wheels provide the highest total carrying capacity in the
industry and make the Workman ready for the toughest challenges.
• Electronic Fuel Injection Performance –
HDX Models
– Smooth, responsive driving
– Increased fuel economy over carbureted
engines
– Instant cold starting
– Automatic high altitude compensation
– On-board diagnostics
• Four-wheel hydraulic disk brakes for easier
stopping and fast servicing
• Proven ride comfort
– Independent, double A-frame front
suspension with dual coil springs
and shock absorbers provides
5¾” (14.6cm) front travel
– DeDion rear axle with dual leaf springs
and shock absorbers provide 3” (7.6cm)
rear travel
• Extreme durability
– DeDion rear axle with I-beam design
isolates and protects transmission,
engine and main frame from vehicle
loading
– Integrated wheel bearings provide
enhanced sealing and consistent heavy
load carrying capability
– Front bumper and front fenders
designed to withstand incidental
impacts without damage
Call your Toro distributor at 1-800-803-8676
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Workman HD/HDX Series Specifications (continued)
SPECIFICATIONS COMMON TO WORKMAN HD SERIES VEHICLES
Independent system with dual “A” frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5 3/4” travel.
DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers. Provides 3” travel.
12-volt, group 26, with 540 cold cranking amps at 0 degrees F (-18 degrees C).
FRONT SUSPENSION
REAR SUSPENSION
BATTERY
Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing
6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter.
TRANSMISSION
Interlock key switch that prevents engine from running in 3rd gear, high range.
Manual engage rear differential lock.
3RD HIGH LOCKOUT
DIFFERENTIAL LOCK
Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to
front wheel with highest traction.
4WD SYSTEM
FRAME
Steel space frame front frame and C-channel rear frame.
Hydraulic power steering with with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD
and 50 degrees on 4WD.
STEERING
2-POST ROPS
BRAKES
2-post rollover protective structure and protective back panel bolted to ROPS.
4-wheel hydraulic disk brake system. 9 1/2” disk with hydraulic service brakes using twin piston fix mount calipers. Parking brake uses mechanical cable
actuated caliper on rear wheels.
4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for dual lift cylinders or for
attachments when quick disconnects are switched. 8 quart total capacity.
HYDRAULICS
Twin halogen headlights and dual taillights actuated by switch on dash. Dual brake lights actuated by brake pedal.
LIGHTS
SEAT BELTS / SEATS
CONTROLS
Lap seat belts standard. Bucket seats with adjustable slides to allow for various seat positions. Hip restraint tubes welded to seat mounting straps.
Throttle, brake and clutch pedals. Gear shifter, differential lock, parking brake, high-low range shifter and hydraulic lift levers.
To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must
be disengaged / switched off.
INTERLOCK
7-gauge steel channel stores behind seat and fits over extended lift cylinder to prevent accidental lowering of bed.
7” (18 cm) with no load.
SAFETY SUPPORT
GROUND CLEARANCE
Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes.
Maximum tongue weight of 600 lbs (272 kg). Maximum trailer weight of 3500 lbs (1587 kg). Trailers over 1500 lbs. require trailer brakes.
REAR TOW HITCH
GROUND SPEED
Standard Tires, Gear 1/2/3
Forward Speeds:
Reverse Speeds:
High Range
Low Range
High Range
Low Range
7.6/11.5/19.8 mph (12.2/18.5/31.9 km/h)
2.9/4.5/7.7 mph (4.7/7.2/12.5 km/h)
7.1 mph (11.6 km/h)
2.8 mph (4.5 km/h)
Overall Length
Overall Width
Overall Height (Top of ROPS)
127.6 in (324 cm) w/o bed
130 in (330 cm) w/ full bed
64.7 in (164.3 cm)
75.8 in (192.5 cm)
DIMENSIONS
Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to
meet the CE Machinery Directive.
CERTIFICATIONS
WARRANTY
Two-year limited warranty. See Operator’s Manual for further details.
Specifications subject to change. Please contact your Toro distributor for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Workman HD/HDX Series accessories
WORKMAN VEHICLE ACCESSORIES
Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg).
Long bed side panels, front panel and tailgate with a fixed pivot.
FULL AREA FLAT BED
FULL FLAT BED SIDE KIT
Welded steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139 cm).
Weight: 55 lbs (25 kg)
1/3 FLAT BED
1/3 FLAT BED
STAKE SIDE KIT
Formed 14-gauge steel stake sides for use with 1/3 flat bed.
Welded steel diamond plate flat bed. Dimensions: 48.1 x 54.7 in (122 x 139 cm). Weight: 161 lbs (73 kg)
2/3 FLAT BED
Short bed side panels, front panel and tailgate with a fixed pivot for use with 2/3 flat bed. Optional tailgate release PN 92-1220.
2/3 FLAT BED SIDE KIT
FULL FLAT BED FOLD
DOWN SIDE KIT
Hinged side panels, front panel and tailgate can be folded down independently for use with full flat bed. Dimensions: 64.5 x 54.7 x 11 in (164 x 139 x 28 cm)
outside. 20 cu ft (.570 cu m) capacity. Weight = 109 lbs (49 kg)
Provides 8 gpm (30.3 liter) at 2000 psi hydraulic flow in a separate circuit to power certain attachments and accessories (standard on TC models).
200 gallon (757 liter) low profile tank sprayer with diaphragm pump and detatchable control box. Three-section, 18.5 ft (5.6 m) open boom system.
Pendulum action spreader with polyester hopper. 14.1 cu. ft. (.396 cu. m.), 750 lbs (340.5 kg) capacity. Spread width is 3 - 46 ft. (1 - 14 m).
HIGH FLOW HYDRAULICS KIT
200 GALLON SPRAYER
VICON SPREADER
18 cu. ft. (.504 cu. m), 1450 lbs (541 kg) capacity conveyor belt style topdresser hydraulically driven by remote hydraulics. 60 in (152 cm) spread width.
Workman bed lift cylinders raise topdresser. Spring load metering gate.
TOPDRESSER 1800
TOPDRESSER 2500
1/3 VERTICAL LIFT
HARD CAB
25 cu. ft. (.7 cu. m) capacity conveyor belt style topdresser towed by Workman vehicle. Textured belt, oscillating axles and all wheel drive.
Electrically activated hydraulic brakes.
An elevating, scissor-lift work platform with 600 lb (272 kg) lift capacity that can be raised from 38 in (96.5 cm) to 98 in (249 cm).
Slope indicator for safe operation. Removable over-ride key for lift controls.
Deluxe hard cab, ROPS and CE certified. Vented front glass windshield, interior dome light and a 2-speed windshield wiper.
Optional heater and mirrors available.
CAB SLIDING WINDOW
DOOR KIT
Door kit for deluxe hard cab. Operator door has a sliding window for ventilation and ability to access exterior elements such as an identification badge
security entry. Passenger door has solid window.
CAB SOLID WINDOW
DOOR KIT
Door kit for deluxe hard cab. Operator and passenger doors have solid windows.
Externally mounted to the cab frame, operator and passenger side rear view mirrors for enhancing all around visibility.
Durable, high-density polyethylene canopy with drainage outlets for moisture runoff.
Clear high-impact modified acrylic material with fold down capability.
CAB REAR VIEW MIRROR KIT
CANOPY
FOLDING WINDSHIELD
Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights.
Headlights are directionally set for right hand driving and passing.
LIGHT KIT “RIGHT SIDE”
LIGHT KIT “LEFT SIDE”
Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights.
Headlights are directionally set for left hand driving and passing.
Consists of (2) front facing and (1) rear facing work lights all mounted on top of ROPS bar.
WORK LIGHT KIT
Consists of (2) double amber warning lights and (2) single red tail lights all for mounting on top of ROPS bar. Requires either a “Right Side” or “Left Side” light kit.
ROPS SIGNAL LIGHT KIT
HEAVY DUTY POWER
LIFT HOLSTER HITCH
Hydraulically-powered lift hitch for rear mounted 2 point arm attachments, including those requiring mechanical down pressure or “float”. Lift capacity: 500
lbs (249 kg). Requires heavy-duty hitch frame.
HEAVY DUTY HITCH
FRAME
Heavy duty hitch frame made of steel plate and tubular construction. Designed for use with heavy duty power lift hoster hitch.
AUTOMATIC
TAILGATE RELEASE
Provides automatic tailgate release when dumping from cargo bed and resets automatically upon lowering of bed. Works on full or 2/3 bed with full sides.
Does not work with folding side kit.
Rear mounted, 540 RPM, PTO shaft mechanically driven by transaxle.
REAR PTO KIT
Mechanical throttle and speed limit control that provides constant RPM for stationary attachments or a controlled maximum speed for applications such as
spraying or spreading.
HAND THROTTLE
For Daihatsu engines. Fits onto end of tailpipe.
SPARK ARRESTOR
PLASTIC BED LINER
A rugged, weatherproof one-piece plastic liner and separate tailgate liner that will protect either a full are bed with sides or a 2/3 bed with sides.
Kit for extending the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of
the vehicle. Recommended for dusty work applications.
HIGH AIR INTAKE KIT
A single 8 1/2” convex mirror with mounting capability on either the operator or passenger side of the vehicle.
REAR VIEW MIRROR KIT
Specifications subject to change. Please contact your Toro distributor for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Workman HD/HDX Series accessories (continued)
WORKMAN VEHICLE ACCESSORIES
A 5th wheel hitch assembly with a rubber-mounted 2” ball hitch and electric brake controller used to tow Cushman GA60 Aerator and similar implements.
Provides a 2” square receiver to enable a “drawbar” hitch.
5TH WHEEL HITCH KIT
2” RECEIVER HITCH KIT
TRAILER BRAKE
WIRING KIT
Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes.
Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
TRAILER SIGNAL
WIRING KIT
REMOTE HYDRAULIC
MANIFOLD KIT
Hydraulic manifold kit that provides to ability to switch hydraulics between cargo bed actuation and remote port usage via use of a opertor panel
mounted switch.
REMOTE HYDRAULIC
FLOAT KIT
Hydraulic float kit that enables both hydraulic lifting and “float” in the down position. Required when using a Deere TC125 sweeper.
©2009 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.
Specifications subject to change. Please contact your Toro distributor for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
|