Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
WELCOME/FEATURES
3
5
6
Steps for Entering Names and Special Characters
29
31
32
32
Viewing the Phonebook
Making Calls Using the Phonebook
Speed Dialing
QUICK REFERENCE GUIDE
CONTROLS AND FUNCTIONS
GETTING STARTED
Read this First
Checking the Package Contents
Setting up the Phone
Terminology
Setting Caller ID Options
Selecting a Language
Headset Installation
8
8
9
10
14
15
17
18
Editing or Erasing a Stored Name, Phone Number,
Distinctive Ring, and Speed Dial
RocketDial (One Touch Dialing)
Chain Dialing
33
34
35
CALLER ID
Viewing the Caller ID List
Deleting Information from the Caller ID List
Using the Caller ID Message List
Call Waiting Deluxe Features
36
37
38
39
40
BASICS
Making and Receiving Calls
Redialing a Call
19
19
20
21
21
22
22
23
23
24
24
25
25
25
26
26
EXPANDING YOUR PHONE
Registering the Second Handset
Call Transfer Feature
41
41
42
42
Ringer Volume Setup
Setting up the Vibrator Mode
Ringer Mute (temporarily)
Ringer Tone Setting
Distinctive Ringer Setup
Adjusting the Earpiece Volume
Mute Microphone
Tone Dialing Switch-over
Traveling Out-of-Range
Selecting a Different Channel
Find Handset
Second Handset Operation
ADDITIONAL INFORMATION
Changing the Digital Security Code
Installing the Holster
Note on Power Sources
Maintenance
44
44
45
46
46
47
General Information
TROUBLESHOOTING
liquid Damage
48
49
Flash and Call Waiting
Voice Mail LED
PRECAUTIONS & WARRANTY
I.C. NOTICE
50
52
53
PHONEBOOK
Storing Phone Numbers, Names,
Distinctive Rings, and Speed Dial
27
INDEX
27
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 2 ]
Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and
engineered to exacting standards for reliability, long life and outstanding performance. To enjoy
the best performance from this phone’s features, please read this manual carefully and save it
for future reference.
Welcome
Features
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
As an Energy Star® Partner, Uniden has determined that this product or product
models meets the Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark.
• 2.4 GHz Spread Spectrum Technology
• Two Handset Expandability (when model TXC400 is added)
• Caller ID and Call Waiting Caller ID
• Dynamic Memory Location for Caller ID Messages and Phonebook Locations
(up to 100 numbers in total)
• Trilingual Language Option
• Up to 5 Hour Talk Time
• Up to 8 Day Standby Battery Life
• 3-Line, 16 Character Backlit Handset Display
• One Touch Dialing
• Call Transfer (when model TXC400 is added)
• 32 Digit Redial / 3 Last Number Redial Locations
• 10 Distinctive Ring Options (6 ringers and 4 melodies)
• Mute Feature
• Flash and Pause
• Find Handset
• Tone/Pulse Dialing
• Handset Earpiece and Ringer Volume Control
• Call Timer
• Vibrator Mode
• One headset included
Download from Www.Somanuals.com. All Manuals Search And Download.
W E LC O M E / FE ATU R E S
[ 3 ]
The TRUc56 series features include AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just
removing the handset from the base so you don’t have to waste time pushing buttons. AutoStandby allows you
to hang up by simply returning the handset to the base.
To protect you against mis-billed calls, which might result from your phone being activated by other equipment,
the TRUc56 series has Random Code™ digital security, which automatically selects one of over 65,000 digital
security codes for the handset and base.
RocketDial™ is a one touch speed dial key that automatically dials your most important or frequently called
number. The number dialed, is a preset number stored by the user.
Digital Spread Spectrum Technology utilizes a “wider frequency band” vs. a “single narrow band” used in standard
digital transmissions. The result is a more secure conversation with the clarity of digital sound, extended range,
and minimal interference from other cordless phones.
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, Random Code, and RocketDial are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
W E LC O M E / FE ATU R E S
[ 4 ]
Step 1 Charging the Battery
Step 2 Connecting
Step 4 Installing the Headset
To make or receive a call, you must install
the headset.
INSTALL THE HANDSET BATTERY
CONNECT TO A PHONE LINE
TO SELECT CALLER ID OPTIONS
When the handset battery pack is fully
charged, plug the telephone cord into
the base unit and then into a telephone
wall jack.
Remove the cover.
Press MENU/MUTE.
Wear the headset.
Press UP or DOWN to move the
pointer to “Caller ID
Setup”, then press SELECT/CH.
Connect the battery
pack connector
Press UP or DOWN to move the
pointer to an option, then
press SELECT/CH.
BLACK
with the
RED
BLACK
noir
correct polarity.
RED
rouge
Press UP or DOWN to change the
option setting.
1
2
Insert the battery
pack into the
Press SELECT/CH and return the
Your phone is set for tone dialing. If your
local network requires pulse dialing, please
see “Setting up the phone, Choose the
dialing mode” in your owner’s manual.
battery compartment.
handset to the base.
TO CHOOSE THE LANGUAGE
Replace the cover.
Press MENU/MUTE.
Press UP or DOWN to move the
pointer to “Language”,
then press SELECT/CH.
Step 3 Setting up the Caller
ID Options/Language
PLUG INTO AC POWER
Plug the headset cord into the jack
on the top of the handset.
Plug the AC adapter cord into
the base unit and then to a
120V AC outlet.
Press UP or DOWN to change the
option setting.
Press SELECT/CH and return the
handset to the base.
Place the handset in the base.
Note: Three Caller ID options
are available: Auto Talk, Caller
ID on Call Waiting (CIDCW) and
Area Code.
You must charge the battery pack
Note: continuously for 3-5 hours before
using the phone.
Q U I C K R E FE R E N C E G U I D E
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 5 ]
Controls and Functions
1. Voice Mail LED
2. Headset Jack
3. LCD Display
1
2
17
4. TALK/FLASH Key
5. PB (Phonebook)/ROCKET
3
(RocketDial)/t (left cursor) Key
6. M DOWN Key
7. L UP Key
8. ✱/TONE Key
9. Handset Charging Contacts
10. END Key
4
5
6
7
10
11
12
13
14
11. CID (Caller ID)/s (right cursor) Key
12. MENU/MUTE Key
8
9
15
16
13. SELECT/CH (channel) Key
14. DEL (delete)/TRANS (transfer) Key
15. RDL (redial)/P (pause) Key
16. # Key
17. Handset Battery Compartment
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N TR O LS A N D FU N C TI O N S
[ 6 ]
18
18. Base Antenna
19. PAGE Key
20. STATUS LED
21. DC Power Input
22. Telephone Line Jack
19
20
21 22
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N TR O LS A N D FU N C TI O N S
[ 7 ]
Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 9)
Step 4 (page 15 to 17)
Unpack the telephone and accessories.
Fourthly, set the Caller ID options, and store
your area code in the memory to use the Caller
ID service. Choose the language of your display.
Step 2 (page 10)
Note: Skip the area code setting if your calling
Secondly, choose the best location to set
up the base unit.
area requires 10-digit dialing.
Step 3 (page 11 to 14)
Step 5 (page 18)
Thirdly, insert the battery pack into the
handset. Connect the base unit. You must
charge the battery pack for 3-5 hours
before plugging into the phone line and
using the phone.
Finally, install one of the headsets supplied
with your phone.
About the digital security code
This cordless telephone uses a digital
security code to prevent unauthorized
access to your base unit. This security
code prevents other cordless handsets
from making calls through your base unit.
If you want to reset the security code,
see page 44.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D
[ 8 ]
Checking the Package Contents
Make sure you have received the following items in the package. If any of these items
are missing or damaged, contact the Uniden Parts Department.
• Base unit (1)
• Handset (1)
• AC adapter (1)
• Rechargeable battery (1)
• Telephone cord (1)
• Headset (1)
• Holster (1)
Also included:
• This Owner’s Manual
• Other Printed Material
Uniden Parts Department
(800) 554-3988
Hours: M-F 7:00 a.m. to 5:00 p.m. CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D
[ 9 ]
Setting up the Phone
Do the following steps:
A. Choose the best location C. Connect the base unit
B. Install the battery pack D. Choose the dialing mode
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
If you have questions
about what will disable
alarm equipment, contact
your telephone company
or a qualified installer.
A. Choose the best location
Before choosing a location for your new phone, read “Installation Considerations” on
page 51. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive
moisture, extremely
low temperatures,
dust, mechanical
vibration, or shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 10 ] G E TTI N G S TA R TE D
B. Install the battery pack
Charge the battery pack for at least 3-5 hours before
plugging the phone line into your base unit.
1) Press down on the latch and lift the battery cover.
• Use only the Uniden
battery (BT-925)
supplied with your
phone. Replacement
batteries are also
available through
the Uniden Parts
Department.
2) Connect the battery pack connector observing the correct
polarity (black and red wires) to the jack inside the
battery compartment.
BLACK
RED
BLACK
noir
Do not exert any force on this connection. It could cause
damage to the battery or to the handset. The plastic
connectors will fit together in only one way. Make sure
that you have made a good connection.
RED
rouge
(See page 9.)
• Recharge your phone on
a regular basis by
returning the handset to
the base after each
phone call.
1
2
3) Align the left side of the battery and insert the battery
as shown.
4) Insert the tabs of the cover into the slots of the
battery compartment and securely close the cover
by pressing down.
5) Place the handset in the base with the keypad facing
forward.
6) Slide the handset down until it clicks.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 11 ]
Battery use time (per charge)
Fully charged (3-5 hours charge time)
• Up to 5 hours continuous use
• Up to 8 days when the handset is in the standby mode
When you charge the handset, Caller ID summary screen and the name
of the handset, HS1appears.
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save
power. If the phone is in the standby mode, ”Low Battery”
appears on the LCD and none of the keys will operate. If the
phone is in use, ”Low Battery” appears and the handset
beeps. Complete your conversation as quickly as possible and
return the handset to the base unit for charging.
The last number dialed in the redial memory is retained for up to
2 minutes while you replace the battery pack.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both the handset and the base unit
once a month. Use a dry cloth or pencil eraser to clean.
If the contacts become very dirty, using water only,
dampen a cloth to clean the charging contacts. Then make
sure to go back over the charging contacts with a dry cloth
before returning the handset to the base to charge.
P
A
G
E
S
T
A
T
U
S
contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 12 ] G E TTI N G S TA R TE D
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack and
to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place
the handset in the base unit as shown.
3) Raise the antenna to a vertical position.
4) Make sure the status LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in
and that the handset makes good contact with the base
charging contacts.
• Use only the supplied AD-430 AC adapter.
Do not use any other AC adapter.
• To charge the handset, slide the handset down until it clicks.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug
the AC adapter easily.
• After installing the battery pack in the handset, charge your handset at least 3-5 hours
before plugging into the phone line. Once the handset battery pack is fully charged,
connect the telephone line cord to the base and telephone wall outlet.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
5) Connect the telephone line cord to the TEL LINE jack and to
a telephone outlet once the handset is fully charged.
electrical hazard.
If your telephone outlet isn't modular type,
contact your telephone company for assistance.
Modular
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 13 ]
D. Choose the dialing mode
Most phone systems use tone dialing, which sends DTMF tones through the phone lines.
However some phone systems still use pulse dialing such as in rural areas. The default
setting is tone dialing. Depending on your dialing system, set the mode as follows:
• If you are not sure of
your dialing system,
set the unit to tone
dialing. Make a trial
call. If the call
connects, leave the
setting as is,
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to “Dial Mode”.
otherwise set the
unit to pulse dialing.
3) Press SELECT/CH and the display will show the current setting.
• If your phone system
requires pulse dialing
and you need to send
DTMF tones in certain
situations during a
call, you may
(The initial setting is Tone.)
4) Press UP or DOWN to change the selection.
5) Press SELECT/CH, and you will hear a confirmation tone.
6) Press END to exit.
“switch-over” to tone
dialing. (Refer to
“Tone Dialing Switch-
over” on page 24.)
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
Standby Mode - The handset is not in use, is off the base, and TALK/FLASH has not been
pressed. A dial tone is not present.
Talk Mode - The handset is not in the base and TALK/FLASH has been pressed enabling a dial
tone. “Talk” appears on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 14 ] G E TTI N G S TA R TE D
Setting Caller ID Options
There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting),
and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing TALK/FLASH. If the phone rings
when AutoTalk is On, simply remove the handset from the base and the phone automatically
answers the call. Or if the handset is not in the base, press any number key, ✱/TONE, or # to
answer the call. If you set AutoTalk to Off, you must press TALK/FLASH to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 40)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to
“Caller ID Setup”, then press SELECT/CH.
3) Press UP or DOWN to choose “Auto Talk” or “CIDCW”,
then press SELECT/CH.
4) Press UP or DOWN to change the selection.
AutoTalk: “Auto Talk On” or “Auto Talk Off”
CIDCW: “CIDCW On”, “CW Deluxe On” or “CIDCW Off”
5) Press SELECT/CH, and you will hear a confirmation tone.
6) Press END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 15 ]
Entering Your Area Code
If you enter a 3-digit area code number in the “Area Code” option, your local area code
does not appear in Caller ID messages. For calls received from outside your local area code,
you will see a full 10-digit number.
1) When the phone is in the standby mode, press MENU/MUTE.
• If your calling area
requires 10-digit
dialing, do not
program this option.
2) Press UP or DOWN to move the pointer to “Caller ID
• When the area code
has already been
stored in memory,
the stored area code
will be displayed. To
change it, press
DEL/TRANS and the
number keypad to
enter the new
Setup”, then press SELECT/CH.
3) Press UP or DOWN to move the pointer to “Area Code”,
then press SELECT/CH.
area code.
4) Use the number keypad (0 to 9) to enter a 3-digit
area code.
5) Press SELECT/CH, and you will hear a confirmation tone.
6) Press END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 16 ] G E TTI N G S TA R TE D
Selecting a Language
Language option can be used to choose the language of your display. You can select
English, French, or Spanish.
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to “Language“,
then press SELECT/CH.
3) Press UP or DOWN to choose English, French (Français),
or Spanish (Español).
4) Press SELECT/CH, and you will hear a confirmation tone.
5) Press END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 17 ]
Headset Installation
The headset will be used to make or receive a call. With the back neck type headset
(HS915), you can have the convenience of hands free communication while using your
cordless phone.
Make sure you have plugged the headset in before making or receiving a call.
1) Place the headset so the microphone is on the left side.
Make sure that the speakers cover both ears, and the headband
is behind your neck.
2) Position the flexible arm so the microphone is about 2 inches
away from your mouth.
3) To use the headset, plug the headset cord into the 2.5mm jack
on the top of the handset.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 18 ] G E TTI N G S TA R TE D
Making and Receiving Calls
To make or receive a call, you need to plug in the supplied headset. (See page 18.)
At the start, wear the headset.
Handset On Base
Handset Off Base
Refer to page 15
“Setting Caller ID
Options” to turn the
AutoTalk feature On if
desired. Any key answer
can be used only when
AutoTalk is set to On.
To answer a call
To make a call
Pick up the handset (AutoTalk)
or pick up the handset and
press TALK/FLASH.
Press any number key, ✱/TONE,
or # (Any Key Answer), or
press TALK/FLASH.
1) Pick up the handset.
2) Press TALK/FLASH.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Pick up the handset.
2) Dial the number, then
press TALK/FLASH.
Dial the number, then
press TALK/FLASH.
To hang up
Press END, or return the handset to the base (AutoStandby).
To enter a pause
within the
When you dial the number, press RDL/P.
“P” appears in the display which represents a pause.
dialing sequence
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 19 ]
Redialing a Call
The last three phone numbers dialed can be quickly redialed.
Redialing from Standby Mode
1) Press RDL/P. The phone number that was last
• If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
dialed appears on the display.
2) Press RDL/P again. Each press of RDL/P will display
one of the last three numbers dialed.
• If the redial memory
is empty, you will
hear a beep.
RDL/P
RDL/P
RDL/P
3) Press TALK/FLASH. The selected number is dialed.
To hang up, press END.
• If you have not pressed any key for 30 seconds, the phone
returns to standby mode.
• If you press END, the operation is canceled and the phone will
return to the standby mode.
Redialing from Talk Mode
1) Press TALK/FLASH.
2) Press RDL/P. The last number dialed will be displayed and redialed.
To hang up, press END.
When using the redial feature in talk mode, only the last number dialed
will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 20 ] B A S I C S
Ringer Volume Setup
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to
• If you select
“Ringer Volume”, then press SELECT/CH.
“Ringer Off”,
<Ringer Off>
appears on the display
when you make or
receive calls, or when
charging the handset.
3) Press UP or DOWN to move the pointer through the ringer
settings (Ringer Off, Ringer Low, or Ringer High).
You will hear a ringer or melody at the selected volume
(or does not ring when you select “Ringer Off”).
4) Press SELECT/CH, and you will hear a confirmation tone.
5) Press END to exit.
Setting up the Vibrator Mode
• The phone is designed
to ring even when the
phone is set to vibrator
mode. To avoid hearing
the ring, turn the
The vibrator mode allows you to vibrate the phone when you receive
a call and the handset is off the base.
1) When the phone is in the standby mode, press MENU/MUTE.
ringer off.
2) Press UP or DOWN to move the pointer to “Vibrator Mode”,
then press SELECT/CH.
3) Press UP or DOWN to choose “Vibrator On” or
“Vibrator Off”.
4) Press SELECT/CH. You will hear a confirmation tone.
5) Press END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 21 ]
Ringer Mute (temporarily)
You can temporarily mute the ringer tone. When the handset is off the base and
the phone is ringing, press END. The ringer tone will return to the previous setting
starting with the next incoming call.
• Pressing the END key
during Vibrate Ring will
stop the Vibrate Ring.
However, if you turn the
ringer off, the Vibrate
Ring will not stop.
• If you set the ringer to
Off, the ringer tone will
not sound.
Ringer Tone Setting
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to “Ringer Tones”,
then press SELECT/CH.
You can choose from 6 ringers or 4 melodies:
- Ringers [Flicker, Clatter, Leap Frog, Ping Ball, Reminder,
Soft Alert]
- Melodies [Beethoven9, For Elise (Elise), Merry Christmas
(Merry-Xmas), Home Sweet Home (Hm Swt Hm)]
3) Press UP or DOWN to move the pointer. You will hear the
ringer or the melody as you scroll through the options.
4) Press SELECT/CH and you will hear a confirmation tone.
5) Press END to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 22 ] B A S I C S
Distinctive Ringer Setup
“Distinctive Ringer” allows you to preset memory locations with a designated ring tone.
When an incoming call is received and the Caller ID information matches the information in
one of the memory locations, the Distinctive Ring that has been stored for that particular
caller will sound.
See ”Storing Phone
Numbers, Names,
Distinctive Rings, and
Speed Dial” on page 27
for storing a Distinctive
Ring in the Phonebook.
If you have set multiple memory locations with distinctive rings, switching the setting to
“Distinctive Off” will result in no distinctive ringing. All incoming calls will have a
normal ring tone. Switching to “Distinctive On” will activate all programmed
distinctive ring memory locations.
1) When the phone is in the standby mode, press MENU/MUTE.
2) Press UP or DOWN to move the pointer to “Distinct. Ring”,
then press SELECT/CH.
3) Press UP or DOWN to choose “Distinctive On” or
“Distinctive Off”.
4) Press SELECT/CH, and you will hear a confirmation tone.
5) Press END to exit.
Adjusting the Earpiece Volume
The handset earpiece volume settings (Volume Low, Volume Medium, Volume High, and
Volume Maximum) can only be adjusted during a call. Press UP or DOWN to select the
volume setting. When you hang up, the phone keeps the last volume setting selected.
When you press UP in maximum volume level or DOWN in lowest volume level, an error tone sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 23 ]
Mute Microphone
You can temporarily turn Off the microphone so that the person
you are talking with cannot hear you. During a telephone call
press and hold MENU/MUTE to turn Off the microphone, and
“Mute” appears on the display. Press MENU/MUTE again to
cancel muting.
If you press END to cancel muting, the call is disconnected and the
phone will return to standby mode.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-over to tone dialing
during the call. For example, entering your bank account number
after you have called your bank.
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing. (See
page 35.)
Initially make your call with the pulse dialing mode. Once your
call connects, press ✱/TONE. Enter the desired number. These
digits will be sent as tone dialing. Once the call ends, the tone
mode is canceled and pulse dialing mode resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 24 ] B A S I C S
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 30 seconds.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change
the phone’s channel for clear operation. This function works only when the phone
is in use.
Press SELECT/CH. “Scanning” appears on the display, indicating the phone is
changing to another channel. For more information on interference, refer to
“Radio Interference” on page 50.
Find Handset
To locate the handset, press PAGE on the base. The handset
beeps for 60 seconds, and “Paging” appears on the display.
Paging is canceled when pressing any key on the handset or
PAGE on the base. Additionally, if you receive an incoming
call, page is canceled.
If the handset battery is
completely drained, the
handset will not beep
when paging.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 25 ]
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press TALK/FLASH to accept the waiting
call. There is a short pause, then you will hear the new caller.
To return to the original caller, press TALK/FLASH again.
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
Voice Mail LED
The voice mail LED on the handset is designed to work with
your voice mail service provided by your local telephone
company. The LED flashes when you have new incoming
messages in the voice mail service.
You may need to occasionally reset the indicator if it remains
On after you’ve retrieved your messages. To reset the indicator,
when the phone is in the standby mode press and hold PAGE
on the base until the paging sound stops (about 5 seconds).
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 26 ] B A S I C S
Phonebook
Phonebook allows you to dial a number using just a few key presses.
Your phone stores names/numbers in the phonebook memory location, and you can search
names in alphabetical order. You have a total of 100 locations that can be used for the
phonebook (including the Speed dials) and Caller ID messages.
• If any of the following occurs during a phonebook operation will be canceled.
-Press END. The phone will return to the standby mode (or the call will be disconnected).
-Press TALK/FLASH or DEL/TRANS.
-Charge the handset.
-Receive an incoming call, page, or transferring call (from the standby mode only).
-Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
• The idle time is 30 seconds. If the handset remains idle for 30 seconds, the phone will return to the
standby mode (or back to the call).
Storing Phone Numbers, Names, Distinctive
Rings, and Speed Dial
• When the memory is full,
you will hear a beep and
“Memory Full”
appears. You cannot store
names and numbers.
1) When the phone is in the standby mode, press PB/ROCKET/t. The handset displays the
number of the phonebook locations used, and information on searching and storing
phonebook locations.
(1st line) the number of the phonebook locations used
(2nd line) How to search (press the number keypad, UP or DOWN)
(3rd line) How to enter the storing operation (press SELECT/CH)
• The pause key counts as
one digit. Pressing RDL/P
more than once increases
the length of pause
between numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 27 ]
2) Press SELECT/CH, then “Store/Edit Name” appears.
3) Store the name (up to 16 characters) by using the number keypad.
• See the “Steps for entering names and special characters” (see page 29).
• Use CID/s and PB/ROCKET/t to move the cursor to the desired location.
• Use DEL/TRANS to delete characters as needed.
• Press and hold DEL/TRANS to delete all the characters.
If a name is not required, go to step 4.
4) Press SELECT/CH to store the name, then
“Store/Edit No.” appears.
5) Press the number keypad to enter the phone number
(up to 20 digits), then press SELECT/CH to store the number.
6) “Distinctive Ring” appears. Then press UP or DOWN to
move the pointer to one of the Distinctive Ring options, then
press SELECT/CH.
If you choose not to store a “Distinctive Ring”, simply select
the “No Selectn” option.
If you select a speed
dial location where a
number is already
stored, the new number
will replace the old
7) “Speed Dial” appears. Then press UP or DOWN to
move the pointer to select the speed dial location
(10 locations: SPD1-SPD0).
number, and the old
number will be stored as
a phonebook location.
If you choose not to store the name/number as a Speed Dial, simply
select the “No Selectn” option.
8) Press SELECT/CH. You will hear a confirmation tone and
“Done!” appears on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 28 ] P HO N E B O O K
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters. With each press
of a number key (0-9), the displayed character appears in the following order: Upper case
letters first, lower case letters next and finally the number corresponding to the key.
Number of times key is pressed
If you make a mistake while entering a name
Use PB/ROCKET/t or CID/s to move the cursor to the incorrect character. Press DEL/TRANS
to erase the wrong character, then enter the correct character. To delete all characters, press
and hold DEL/TRANS.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 29 ]
For example, to enter Uniden:
1) When the phone is in the standby mode, press PB/ROCKET/t. The handset displays
the number of phonebook locations you have stored, and how to search and store
the phonebook locations.
2) Press SELECT/CH, then “Store/Edit Name” appears.
3) Press 8 twice.
4) Press 6 five times.
5) Press 4 six times.
6) Press 3 four times, then press CID/s to move the cursor to the right.
7) Press 3 five times.
If the next character uses the same number key, you must press CID/s to move the cursor over.
Otherwise the next time you press the number key, it changes the character that was previously set.
8) Press 6 five times.
9) When finished, press SELECT/CH.
To continue to store the telephone number, proceed to step 5 on page 28.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 30 ] P HO N E B O O K
Viewing the Phonebook
Your phone stores names/numbers in the phonebook memory locations, and you can search
names in alphabetical order. You can view the phonebook during a call as well as when the
phone is in the standby mode.
“/SD” appears on the
display when you review
the RocketDial, and
“/SPDn” appears when
you review a Speed dial.
1) Press PB/ROCKET/t.
If you press PB/ROCKET/t during a call, the following
screen appears.
2) Press UP or DOWN, or the number keypad to view the
phonebook locations.
a) Alphabetical order
Ascending order: Press DOWN to view locations. The location in the RocketDial
appears first in the display. Each time DOWN is pressed, phonebook locations appear
in ascending order.
Descending order: Press UP to view locations. A name starting with a number or a mark,
or <No Name>appears first. Each time UP is pressed, phonebook locations appear in
descending order.
b) From a number key
Refer to the letters on the number keys to select the first letter of the desired name.
Press a number key until any name with the same initial is displayed (See the table in
“Steps for Entering Names and Special Characters” on page 29).
For example, to search for “Uniden”, press 8 two times. Press DOWN or UP until the name
is displayed. If you press UP while the first name in “U” is displayed, a name starting
with “T” will appear, or if you press DOWN while the last name in “U” is displayed, a
name starting with “V” will appear.
3) Press PB/ROCKET/t (if you view the phonebook during a call) or END.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 31 ]
Making Calls Using the Phonebook
From Standby Mode
1) When the phone is in the standby mode, press PB/ROCKET/t.
2) Press UP or DOWN to view the phonebook locations
(see “Viewing the Phonebook” on page 31).
3) Press TALK/FLASH. The displayed number is dialed.
4) To hang up, press END.
From Talk Mode
1) Press TALK/FLASH.
2) Press PB/ROCKET/t.
3) Press UP or DOWN to view the phonebook locations
(see “Viewing the Phonebook” on page 31).
4) Press SELECT/CH. The number in the displayed phonebook location is dialed.
5) To hang up, press END.
Speed Dialing
If you select a speed dial memory location (10 locations: SPD1 - SPD0) when storing a phone
number in the phonebook dial location, you can use the speed dialing feature. When the
phone is in the standby mode, press and hold a number key (0-9) associated with the speed
dial. The number stored in the speed dial appears, then press TALK/FLASH. The phone number
in the speed dial (SPD1 - SPD0) is dialed.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 32 ] P HO N E B O O K
Editing or Erasing a Stored Name, Phone
Number, Distinctive Ring, and Speed Dial
1) When the phone is in the standby mode, press PB/ROCKET/t.
2) Press UP or DOWN, or the number keypad to view the phonebook
locations (see “Viewing the Phonebook” on page 31).
a. Editing the Stored Data
1) When the phonebook location to be edited appears,
press SELECT/CH. “Store/Edit Name” appears.
2) Follow the steps 3 to 7 under “Storing Phone Numbers, Names, Distinctive
Rings and Speed Dial” on page 28 to complete the editing operation.
3) Press SELECT/CH. You will hear a confirmation tone and “Done!” appears on
the display.
b. Deleting the Stored Data
1) When the phonebook location to be deleted appears,
press DEL/TRANS. “Delete Memory?” appears.
2) Press UP to move the pointer to “Yes”.
3) Press SELECT/CH or DEL/TRANS. You hear a confirmation tone.
“Deleted!” appears in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 33 ]
RocketDial (One Touch Dialing)
You can store a number you dial often in the RocketDial. The
rocket dialing allows you to dial a number with one key press.
Memory location for
the RocketDial is
independent from
the memory location
for the phonebook.
Storing the RocketDial
1) When the phone is in the standby mode, press PB/ROCKET/t.
2) Press DOWN once to display the RocketDial menu, then press
SELECT/CH. Store the name, phone number, and distinctive
ring by following the steps 3 to 6 under “Storing Phone
Numbers, Names, Distinctive Rings and Speed Dial” on
page 28.
3) Press SELECT/CH. You will hear a confirmation tone and “Done!”
appears on the display.
Making calls with the RocketDial
When the phone is in the standby mode, press and hold
PB/ROCKET/t. The number in the rocket location is dialed.
Deleting the RocketDial
1) When the phone is in the standby mode, press PB/ROCKET/t.
2) Press DOWN to display the RocketDial menu.
3) Press DEL/TRANS.
4) Press UP to move the pointer to “Yes”.
5) Press SELECT/CH or DEL/TRANS. You hear a confirmation tone.
“Deleted!” appears in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 34 ] P HO N E B O O K
Chain Dialing
The memory locations in the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits), that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store the special number in the
Phonebook location (refer to “Storing Phone Numbers, Names, Distinctive Rings and
Speed Dial” on page 27). Once you have called your bank, and when you are
prompted to enter the account number, press PB/ROCKET/t and use UP or DOWN to
select the number in the Phonebook location, then press SELECT/CH.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 35 ]
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and
phone number on the display before you answer the phone. Additionally, you can dial the
displayed number and store the information for memory dialing.
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the
Caller ID message
will not appear.
Make sure you have turned on the Caller ID/Call Waiting feature. (See page 15.)
Important:
Memory locations for Caller ID messages and Phonebook locations (including Speed Dials) are
common, you can store up to 100 in total. A Caller ID message is not stored when you have
stored 100 of the phonebook locations. The earliest Caller ID message is overwritten when
you have stored 100 of the phonebook locations and Caller ID messages in total.
• When the call is received
via a telephone company
that does not offer
Caller ID service, the
caller´s phone number
and name do not appear.
(This includes some
• If any of the following occurs during Caller ID operation will be canceled.
-Press END. The phone will return to the standby mode (or the call will be disconnected).
-Press TALK/FLASH or DEL/TRANS.
-Charge the handset.
-Receive an incoming call, page, or transferring call (from the standby mode only).
-Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
• The idle time is 30 seconds. If the handset remains idle for 30 seconds, the phone will return to the
standby mode (or back to the call).
international calls.)
• When the call is via a
private branch exchange
(PBX), the caller´s
phone number and name
may not appear.
1) When the Caller ID message is received, the display shows the caller’s phone number
along with the date and time. The incoming
call information is stored in the Caller ID
record. If the Caller ID service includes the
caller’s name, the name will appear on the
display. (up to 15 characters.)
You may receive any one of the following messages:
When invalid data is received
When a private name is received
“Incomplete Data”
“Private Name”
When a private number is received “Private Number”
When a unknown name is received “Unknown Name”
When a unknown number is received “Unknown Number”
2) When you pick up the phone, the display changes to “Talk”.
(AutoTalk feature is set to On.)
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 36 ] C A LLE R I D
Viewing the Caller ID List
The Caller ID list stores information for incoming calls – even unanswered calls.
You can store 100 of the Caller ID messages and Phonebook locations (including
Speed Dials) in total. You can view the Caller ID list during a call or when the
phone is in the standby mode.
The number of calls
from the same Caller
ID appears next to the
received time. Once
you have reviewed the
new message, the
1) Press CID/s.
The summary screen appears. The screen shows the number of
new messages and the total number of messages.
number will be cleared
and disappears.
2) View Caller ID messages by following the procedure.
From new to old:
a. Press DOWN to display the latest Caller ID message.
b. Press DOWN to see the previous message.
From old to new:
a. Press UP to display the earliest Caller ID message.
b. Press UP to see the next message.
In alphabetic order:
Press the number keypad (2-9 and 0) to display the Caller ID messages in
alphabetical order. Refer to the letters on the number keys to select the
desired letter.
Once you view the Caller ID list in alphabetical order, you cannot switch to the Caller ID
display in historical order (from new to old or from old to new) unless you exit the operation.
3) Press CID/s (if you view the Caller ID list during a call) or END.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D [ 37 ]
Deleting Information from the Caller ID List
Deleting a Caller ID message
1) While the incoming Caller ID information is displayed,
Once the Caller ID
data has been deleted,
the information
press DEL/TRANS. “Delete Message?” appears.
2) Press UP or DOWN to choose “Yes” or “No”.
cannot be retrieved.
3) Press SELECT/CH or DEL/TRANS.
When the pointer is at “Yes”: A tone sounds and the Caller ID message is deleted.
The next or previous Caller ID message is then displayed.
When the pointer is at “No”: The display returns to the Caller ID message.
Deleting all Caller ID names/numbers
1) Press CID/s.
2) Press DEL/TRANS.
3) Press UP or DOWN to choose “Yes” or “No”.
4) Press SELECT/CH or DEL/TRANS.
When the pointer is at “Yes”: A tone sounds and all stored Caller ID messages are deleted.
When the pointer is at “No”: The display returns to the summary screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 38 ] C A LLE R I D
Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
1) Press CID/s. The summary screen appears. The screen shows
the number of new messages and the total number of messages.
• You cannot make a call
from the Caller ID list if
your phone is connected
to a private branch
2) Use the number keypad (2-9 and 0), UP, or DOWN to view the
exchange (PBX).
Caller ID message list.
• When a long distance
call has been set, “1”
appears in the display.
3) Press TALK/FLASH. The displayed phone number dials automatically.
Talk
8002971023
From Talk mode
1) Press TALK/FLASH.
2) Press CID/s. The summary screen appears.
3) View the Caller ID message you want to dial.
4) Press SELECT/CH. The displayed phone number will be dialed.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
Long Distance calls and Area Code Setting/Cancellation
While the incoming Caller ID information is displayed, pressing ✱/TONE will place or
remove the prefix “1” in the display to set the call for a long distance call, or pressing #
will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming
call information (i.e., Caller ID list), the phone number of the party on the Caller ID list
can be stored in memory.
1) When the phone is in the standby mode, while the incoming
Caller ID information is displayed, press PB/ROCKET/t.
2) Press UP or DOWN to choose “Store in PB?” (Phonebook
locations) or “Store in SD?” (RocketDial location). To
cancel Storing, select “Cancel”.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D [ 39 ]
3) Press SELECT/CH. You will hear a confirmation tone.
• You cannot store a Caller ID message in the phonebook if a phone number does not appear in the message.
• You cannot set the Distinctive Ring or Speed dial in this step. If you would like to set these options, edit
the stored data.
• Even if the memory locations are full, the message will be stored in the Phonebook, however, the message
will be erased from the Caller ID List.
• If data is already stored in the RocketDial, the old data will be overwritten by the new data.
• To activate features,
select “CW Deluxe
On” in the Caller ID
setup. See page 15.
Call Waiting Deluxe Features
• You can also answer a
waiting call immediately
by pressing TALK/FLASH,
the first caller will be
placed on hold. To return
to the original caller,
Your TRUc56 series gives you new options for Call Waiting. At the touch of a button, you can
place the caller on hold, send them to your voice mail service, or conference them into your
current call. You may be required to subscribe to Call Waiting and Call Waiting Deluxe to use
these features. Not all features are available in all areas. Check with your local telephone
company for details.
press TALK/FLASH again.
1) When you receive a Call Waiting call, press MENU/MUTE for a list of options.
2) Press UP or DOWN, or the number keypad (1-7) to select an option. For example:
Press
DOWN
4 times
Press
DOWN
2 times
3) Press SELECT/CH. A confirmation screen will appear.
Your TRUc56 series is pre-programmed with seven call waiting options. You may select to
ask the calling party to hold, send them a busy message, forward them to your voice mail,
or answer and drop the first caller. You may also select to conference them into the current
call or, at any time, choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 40 ] C A LLE R I D
Expanding Your Phone
Your phone supports up to 2 handsets (the original handset and the second handset).
You can now place a fully featured cordless handset anywhere AC power is available
to connect the handset charger. Additionally, you can transfer an outside call to
another handset.
• We refer to the TXC400 handset as the second handset, and the TRUc56 handset as the original
handset in this section.
• Before using TXC400, charge the TXC400 battery pack for at least 15-20 hours, and register the
TXC400 handset to the TRUc56 base.
Registering the Second Handset
You need to register the second handset before using. To register the second
handset, do the following steps.
1) Unplug the AC adapter of the TRUc56.
2) Press and hold PAGE on the TRUc56 base, while you plug in the AC Adapter, hold PAGE
until the status LED on the base flashes.
3) Press talk/flash on the TXC400’s handset. “Handset Registering” appears. When
the operation is finished, you will hear a confirmation tone and “Registration
Complete” will appear. The status LED is no longer illuminated.
• If the registration fails, “Registration Failed” appears. Register the TXC400 again.
• You must complete the registration operation within 30 seconds, or the phone returns to the
standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
E XPA N D I N G YO U R P HO N E [ 41 ]
Call Transfer Feature
You can transfer an outside call to the other handset.
If you transfer the call and it is not picked up after 5 minutes,
the call will be disconnected.
To transfer a call (to the second handset)
1) Press DEL/TRANS during a call. The call will automatically be
placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone
stops. To cancel the transfer, press DEL/TRANS or TALK/FLASH
on the handset.
To receive a transferred call (from the second handset)
Pick up a handset (when AutoTalk is set to On), or press
talk/flash to answer the transferred call. Additionally, you can
answer the transferred call by pressing any number key, ✱/tone,
or # (when AutoTalk is set to On).
Second Handset Operation
Setting up
Charging
Charge the second handset for 15-20 hours before using.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 42 ] E XPA N D I N G YO U R P HO N E
CIDCW
• CIDCW setting is a universal setting. When the setting is changed on the original
handset, the CIDCW setting for the second handset is changed as well.
• CW Deluxe setting is independent from the original handset. To set the CW Deluxe setting
on the second handset, do the following.
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to “Caller ID Setup”,
then press select/ch.
3) Press + or - to select “CW Deluxe”, then press select/ch.
4) Press + or - to select “CW Deluxe On” to active CW Deluxe features,
then press select/ch. You will hear a confirmation tone.
Operation
Making and receiving calls
If you press talk/flash on the handset while the other handset is in use, you will hear
a beep and the handset will return to the standby mode.
Security code
You can change the digital security code, only from the original handset.
Memory locations (Redial memory/Dynamic memory locations)
Memory locations in the original handset and the second handset are independent.
Page
If you press any key on a handset while paging, the paging sound from the other handset
will stop as well.
Caller ID
• When you receive a CIDCW during a call, the Caller ID information will not be displayed
or stored in the other handset.
• To display CIDCW on the second handset, you must turn On the CIDCW or CW Deluxe on
the original unit.
Others
• You can’t use or purchase the second handset as an alternative of the original handset.
• Save this owner’s manual. The TXC400 owner’s manual describes only the instructions
specific to the second handset. For detailed operation, refer to this owner’s manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
E XPA N D I N G YO U R P HO N E [ 43 ]
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code, deregister the code, then
register a different code.
De-register the Security Code
1) Remove the handset from the base. In the standby mode, press and hold
DEL/TRANS (xfer/del for TXC400) and END until you hear a confirmation tone.
“De-Register?” appears.
2) Press UP to select “Yes”, then SELECT/CH. You will hear a confirmation tone,
and “Deregistration Complete” appears.
• If you have not pressed any key for 30 seconds while in the de-registering operation, the
phone returns to the standby mode.
• While in de-registering operation, if you receive an incoming call, page, or transferring call, or
charge the handset, or press TALK/FLASH or END, the operation is canceled.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 44 ] A D D I TI O N A L I N FO R M ATI O N
Register the Security Code
1) Unplug the AC adapter.
2) Press and hold PAGE on the base, while you plug in the AC Adapter, hold PAGE
until the status LED on the base flashes.
3) Press TALK/FLASH. “Handset Registering” appears.
When the registration operation is finished “Registration Complete”
appears and the status LED is no longer illuminated. You will hear a
confirmation tone and the phone returns to the standby mode.
• You must complete the registration operation within 30 seconds, or the phone returns to the
standby mode.
• During the registration operation, you cannot receive an incoming call, page, or make a call.
If you have a second handset (TXC400)
You need to perform the following steps:
1) De-register the digital security code of the TXC400 by following the steps on page 44.
2) Register the TXC400 to the TRUc56 base (For instructions, see “Registering the Second
Handset” on page 41).
Installing the Holster
• Line up the groove on the back of the handset with the groove
on the holster. It fits in the holster only one way.
• Slide the phone into the holster.
When you charge the
handset, remove the
holster if it is attached.
• Use the spring clip to attach the holster to your belt or pocket.
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 45 ]
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year.
Please contact your place of purchase or the Uniden Parts Department for a replacement battery. (See page 9)
Warning:
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden
battery model and Uniden adapter model specifically designated for this product.
Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
Caution
• Use the specified Uniden battery pack (BT-925).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Maintenance
Caution
When the handset or base unit becomes slightly dirty
Do not use paint thinner, benzene, alcohol,
Wipe with a soft, dry cloth.
or other chemical products.
Doing so may discolor the surface of the
telephone and damage the finish.
When the handset or base unit becomes very dirty
Wipe with a soft cloth that has been dampened with diluted,
neutral detergent. Dry with a dry cloth.
When the charging contacts become very dirty on both the handset and base unit
Using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the
charging contacts with a dry cloth before returning the handset to the base unit to charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 46 ] A D D I TI O N A L I N FO R M ATI O N
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ºC to +50 ºC (+32 ºF to +122 ºF)
AC Adapter Information
AC Adapter part number:
Input Voltage:
AD-430
120V AC 60Hz
9V DC 600 mA
Output Voltage:
Battery Information
Battery part number:
Capacity:
BT-925
650 mAH, 3.7 V
Battery use time (per charge)
From fully charged
Talk mode duration:
Standby mode duration:
Up to 5 hours
Up to 8 days
If the handset is left off of the base, the actual Talk mode duration will
be reduced respective to the amount of time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the
operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage,
the battery should last about one year.
A replacement Uniden adapter and battery may be purchase Uniden accessories at your local Uniden dealer or by
contacting the Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. CST, Monday
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 47 ]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The status LED won’t illuminate when
the handset is placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
The audio sounds weak
and/or scratchy.
• Move the handset and/or base to a different location away from metal objects
or appliances and try again.
• Press SELECT/CH to help eliminate background noise.
• Make sure that you are not too far from the base.
Can’t make or receive calls.
• Make sure you have installed the headset.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 44).
• Make sure that you are not too far from the base.
The handset doesn’t ring or receive
a page.
• The battery pack may be weak. Charge the battery on the base unit
for 3-5 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 44).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
The handset doesn’t communicate
with the base or the other handset.
• Change the digital security code (See page 44).
• Make sure that you have registered the second handset.
The second handset can’t join
the conversation.
• Only one handset at a time can talk with an outside caller. To allow a different
handset to talk to the caller, transfer the call to the other handset.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 48 ] TR O U B LE S HO O TI N G
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion,
please read the following steps.
Case
Action
If the handset or base is
exposed to moisture or liquid,
but only affects the exterior
plastic housing.
Wipe off the liquid and use as normal.
If moisture or liquid has entered
the plastic-housing (i.e. liquid
can be heard in the phone or
battery compartment).
1) Remove the battery cover of the handset and leave it off for ventilation.
2) Remove the batteries by disconnecting.
3) Leave the battery cover off and the batteries disconnected
for 3 days for maximum drying time.
4) Once completely dry, reinstall the batteries and the battery cover.
5) Recharge the handset’s batteries for 20 hours in the base unit
before using the phone.
IMPORTANT: You must unplug the telephone line while recharging
the batteries to avoid charge interruption.
If the base unit or the handset
is submerged or covered in a
sticky substance, such as juice.
Handset:
1) Remove the battery cover of the handset and the batteries.
2) Rinse the handset in warm distilled water.
3) Let dry for at least 3 days.
4) Once completely dry, reinstall the batteries and the battery cover.
5) Recharge the handset’s batteries for 20 hours in the base unit before using
the phone.
Base:
1) Disconnect the AC adapter from the base unit, ending power supply.
2) Disconnect the telephone cord from the base unit.
3) Rinse the base in warm distilled water.
4) Let dry for at least 3 days.
CAUTION:
DO NOT use a microwave oven to speed up the drying time. This will cause
permanent damage to the handset and the microwave oven.
Download from Www.Somanuals.com. All Manuals Search And Download.
TR O U B LE S HO O TI N G [ 49 ]
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
on it.
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
Precautions!
Important Electrical Considerations
Before you read anything else, please observe the following:
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture.
Warning!
Please do not attempt to unplug any appliance during an
electrical storm.
Rechargeable Lithium Ion Battery Warning
The FCC Wants You To Know
•
This equipment contains a rechargeable Lithium Ion battery.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. The equipment cannot be used on public coin phone service
provided by the telephone company. Connection to party line service
is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission
for information.)
• The rechargeable Lithium Ion battery contained in this equipment
may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable Lithium Ion battery used in this
equipment in any charger other than the one designed to charge
this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)
E. If the product has been dropped or the cabinet has
been damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of
the leak.
Rechargeable Lithium Ion
Batteries Must Be Recycled
or Disposed of Properly
Hearing Aid Compatibility Information
This telephone is not compatible with inductively coupled hearing
aids. FCC rules prohibit the use of non-hearing aid-compatible
telephones in the following locations or applications:
1. All public or semipublic coin-operated or credit card telephones.
2. Elevators, highways and tunnels (automobile, subway, railroad or
pedestrian) where a person with impaired hearing might be
isolated in an emergency.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
3. Hospital rooms, residential health care facilities, convalescent
homes and prisons.
4. Hotel and motel rooms. (At least ten percent of the rooms must
contain hearing aid-compatible telephones, or jack for plug-in
hearing aid-compatible telephones which will be provided to
hearing-impaired customers upon request.)
5. Hotel, motel, apartment lobbies, in stores where telephones are
used by patrons to order merchandise, in public transportation
terminals where telephones are used to call taxis or to reserve
lodging or rental automobiles.
Additional Battery Safety Precautions
Important Safety Instructions
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
1. Use only the Uniden battery pack specified in the
owner’s manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the Lithium Ion battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
6. Place where telephones are specifically installed to alert
emergency authorities such as fire, police or medical
assistance personnel.
7. Workstations for hearing impaired personnel.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in the owner¬s manual provided for
this product.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.
Range
Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends upon
the environment in which the telephone is used. Many factors limit
range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used
as a means of comparison against other range claims.
6. Observe proper polarity orientation between the battery pack and
battery charger.
SAVE THESE INSTRUCTIONS!
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 50 ] P R E C A U TI O N S & WA R R A N TY
Telephone Line Problems
Installation Considerations
Selecting a Location
One Year Limited Warranty
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
Important: Evidence of original purchase is required
for warranty service.
Before choosing a location for your new phone, there are some
important guidelines you should consider:
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
• The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which
does not have a switch to interrupt its power.)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from
defects in materials and craftsmanship with only the limitations
or exclusions set out below.
• Keep the base and handset away from sources of electrical noise
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your
problem. If you determine that it is the cause, you must leave it
disconnected until the trouble has been corrected.
such as motors or fluorescent lighting.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date
of original retail sale. The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden,
(C) improperly installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any
•
Be sure there is sufficient space to fully extend the base antenna.
• The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
• You should charge your new phone for 3-5 hours before
completing the installation or using the handset.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is
NOT DEFECTIVE. If these noises continue and are too distracting,
please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance
because of the potential for interference. Be certain that the
antenna on the unit is fully extended when needed.
Telephone Line Outlets
There are two types of phone outlets:
conjunction with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner’s manual for this product.
Modular Jack
Most phone equipment available now uses modular jacks. Phone
cords are fitted with a molded plastic connector which plugs into
this type of jack. If you do not have modular phone jacks,
contact your local telephone company for information about
their installation.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in
effect, warrantor will either, at its option, repair or replace the
defective unit and return it to you without charge for parts,
service, or any other cost (except shipping and handling)
incurred by warrantor or its representatives in connection with
the performance of this warranty. Warrantor, at its option, may
replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate
the interference.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types
of installations require a modular jack converter. This type of
installation is not difficult; however, you should contact your
Uniden telephone dealer or a telephone supply store for advice
about the proper adapter or converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the
telephone cords:
REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation
of incidental or consequential damages so the above limitation or
exclusion may not apply to you.
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
More than One Cordless Telephone
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
LEGAL REMEDIES: This warranty gives you specific legal rights,
and you may also have other rights which vary from state to
state. This warranty is void outside the United States of America.
• Use caution when installing or modifying telephone lines.
Applying Power to the Base
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If,
after following the instructions in the owner’s manual you are
certain that the Product is defective, pack the Product carefully
(preferably in its original packaging). The Product should
include all parts and accessories originally packaged with the
Product. Include evidence of original purchase and a note
describing the defect that has caused you to return it. The
Product should be shipped freight prepaid, by traceable means,
to warrantor at:
Cordless Telephone Privacy
This phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC plug
when the phone is placed on a desk or table, wrap the power cord
around the strain relief notch on the bottom of the base.
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a
fire or other electrical hazards.
communications using your cordless telephone may not be private.
Plug the AC Adapter into a standard 120 VAC wall outlet.
Uniden America Corporation
Parts and Service Division
Do not use an outlet controlled by a wall switch.
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
Use only the Uniden AC Adapter supplied with this phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
P R E C A U TI O N S & WA R R A N TY [ 51 ]
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself.
The REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
“Privacy of communications may not be ensured when using this telephone”.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 52 ] I . C . N O TI C E
Index
Making calls ............................32
Storing ..................................27
Viewing ..................................31
Precautions................................50
0 - 9
D
10 ring options ..........................22
Deluxe Call Waiting Features ........40
Dialing mode..............................14
Digital security code................8, 44
Distinctive Ringer ......................23
A
Area Code..................................16
AutoTalk....................................15
R
Receiving a call..........................19
Redialing a call ..........................20
Registering the second handset ....41
Ringer volume ............................21
RocketDial ................................34
E, F, G, H
B
Earpiece volume ........................23
General information ....................47
Headset installation ....................18
Holster ....................................45
Battery pack
Preparing and charging..............11
Replacement and handling ........46
C
S
I, J, K, L
Caller ID ..................................36
Caller ID service ......................36
Calling....................................39
Call Waiting........................15, 40
Deleting..................................38
Setting ..................................15
Storing ..................................39
Using ....................................39
Viewing ..................................37
Call transfer feature ....................42
Chain dialing ............................35
Channel ....................................25
Second handset operation ............42
Setting up ................................10
Base unit ................................13
Handset ..................................11
Speed dialing ............................32
I.C. Notice ................................52
Important Safety Instructions ......50
Language ..................................17
M, N, O
Maintenance ..............................46
Making a call ............................19
Mute ........................................24
One touch dialing ......................34
T, U, V, W, X, Y, Z
Transferring a call ......................42
Receive from the second handset ..42
Transfer to the second handset ....42
Troubleshooting..........................48
Vibrator ....................................21
Voice Mail LED............................26
Warranty ..................................51
P, Q
Package contents..........................9
Phonebook ................................27
Editing ..................................33
Erasing ..................................33
Download from Www.Somanuals.com. All Manuals Search And Download.
I N D E X [ 53 ]
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 54 ]
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 55 ]
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 56 ]
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Accessibility
?
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|