UDRC14
ACCESSORY CAMERA
Compatible with
UDR444 Wireless
Video Surveillance System
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety precautIonS
# this manual contains important information about this product’s
operation. If you are installing this product for others, you must leave this
manual or a copy with the end user.
When using your equipment, always follow basic safety precautions to reduce the
risk of fire, electric shock and injury to persons, including the following:
x The cameras included with your monitor are weatherproof and have an IP65
weather rating. Water can be sprayed on them and they will still work; however, the
cameras cannot be submerged underwater.
x Although the cameras can be exposed directly to the rain, it is recommended that,
if they are used outdoors, they be mounted under some type of cover like a patio
overhang or eave. As rainwater drops start to dry on the camera glass, it can cre-
ate spots that will reflect the light from the infrared LEDs used for night vision, thus
causing lower quality video.
x To avoid any risk of electric shock from lightning, avoid handling any electronic
devices (except battery-powered ones) during an electrical storm.
x Use only the power cord indicated in this manual.
x Never tug or pull on any power cord; be sure to leave some slack in the cord when
placing your equipment, and always use the plug to unplug cord from the wall
outlet.
x Never leave power cords where they can become crushed, cut, or frayed; when
running power cords, avoid letting them rub against any sharp edges or lie across
any high traffic areas where people might trip over them.
x Do not use the device if the adapter cords or plugs have been damaged, the
monitor has been exposed to liquids, or the monitor/camera has been dropped or
is damaged.
x Warnings to parents and other users
Failure to follow these warnings and the assembly instructions could result in
serious injury or death. This product is not designed or intended for use as a
medical monitor, nor should this product be used as a substitution for medical or
parental supervision. Always be sure that both the transmitter and receiver are
working properly, and are within range of each other.
x STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.
x WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy
and is not intended for use by any children under the age of 13. If you are between
the ages of 13 and 18, review these terms, conditions and safety warnings with
your parents or guardian to make sure that you and your parent or guardian
understand these terms, conditions, and safety warnings.
x Allow for proper ventilation when units are in use. Do not cover the camera or
receiver with any object such as a blanket. Do not place it in a drawer or in any
location which would muffle the sound or interfere with the normal flow of air.
SaVe tHeSe InStructIonS!
for best results:
To avoid damage to your equipment, follow these simple precautions:
x Do not drop, puncture or disassemble any part of the equipment. There are no
user-serviceable parts inside.
x Do not expose the equipment to high temperatures, and avoid leaving the equip-
ment in direct sunlight for more than a few minutes. Heat can damage the case or
electrical parts.
x Do not place heavy items on top of the equipment or expose the equipment to
heavy pressure.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
x Remove the power adapter during long periods between usages.
x Clean only with a dry cloth.
Failure to follow the instructions in this operating manual will void the
warranty. Uniden assumes no liability for damages to property or injury to
persons caused by improper handling or failure to comply with these safety
instructions.
WHat’S In tHe Box
•
•
•
•
•
Digital Wireless Camera (1)
AC Adapter for Camera (1)
Camera Stand with mount screws (1 set)
Antenna (1)
Owner’s Manual (1)
# If any items are missing or damaged, contact our Customer Care Line
immediately!
Parts of the Camera
1
10
5
6
2
7
3
4
9
8
FRONT
BACK
No. What it does
1
2
3
4
5
camera antenna: Sends signals to the monitor.
Light sensor: Measures light intensity to activate IR LEDs for night vision.
microphone: Receives sounds from the area near the camera.
pIr sensor: Detects motion within camera's line of sight.
camera Lens: Mechanism through which the cameras view surroundings
and record images.
6
7
8
Infrared LeD: Infrared LEDs provide viewing in no/low light conditions.
pair: Press this button to pair the camera to the monitor.
camera stand: Connects to the camera to allow multiple mounting
positions.
9
Speaker: Transmits sound from the monitor (intercom).
10 power Input (9V Dc): Connect to power adapter.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG StarteD
Install the Base
The following tools are required:
•
•
•
Electric Drill
5mm Drill Bit
No. 2 Philips Screwdriver
1. Hold the base of the camera stand where you want to mount it and mark the
location of the screw holes.
2. Use the included screws and anchors to attach the base to the wall or ceiling.
You can also screw the base into a flat surface such as a tabletop if needed.
3. Before attaching the camera, tug gently on the stand to make sure it is
securely in place.
Attach the Camera
1. Attach the camera bracket to the mounting screw. You can attach the stand to
the top or the bottom of the camera as needed.Tighten it a few turns, then turn
the camera to face the direction you want.
Attach the camera
1
Tighten the brace against
the camera to
secure it
to the mounting
screw and turn it
to the desired
direction.
2
in place.
3
Loosen the
wingnut to
unlock the
mounting
post.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
4
2. Tighten the camera brace up against the camera to secure it into place.
3. Unlock the mounting post by turning the wingnut to the left a few turns.
4. Set the mounting post to the correct angle, then tighten the wingnut until the
post is locked into place.
5. Attach the antenna to the rear of the camera.
6. Connect one end of an AC adapter to the camera’s power pigtail and plug
the other end into a 120 volt AC (standard indoor) power outlet. (If necessary,
connect the extension cord to the camera’s pigtail and connect the AC adapter
to the extension cord.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PAIR CAMERA TO UDR444 SYSTEM
Refer to the UDR444 Wireless Video Surveillance System Owner’s Manual for
pairing and other operation instructions.
proDuct SpecIfIcatIon
General
Operating frequency range
TX power
2.400 ~ 2.4835GHz
15dBm (typical)
FHSS
Spread spectrum
Modulation type
Data Rate
GFSK
2 Mbps
Communication range
Camera
500 ft Line of Sight
Image sensor type
1/4” color CMOS image sensor (OV7725)
(Manufacturer/Model #)
Effective pixel
H: 640; V: 480
MJPEG
Image processing
Image resolution
640x480 @ 10fps
320x240 @ 20fps
Lens
3.6mm F2.0
Auto
Exposure
White balance
Power requirement
Power consumption
Auto
9.0Vdc ± 5%
160mA (IR LED Off)
350mA (IR LED On)
Operating temp range
Weatherproof
–10 ~ 50˚ C
IP65
RoHS Compliance
Yes
Camera Housing Material
Plastic
Recycling and Disposal Information
x Do not dispose of electronic devices or any of their components (especially batter-
ies and LCD displays) in your municipal trash collection.
x Consult your local waste management authority or a recycling organization like
Earth911.com to find an electronics recycling facility in your area.
x If you are unable to locate proper recycling facilities in your area, please return this
product to Uniden for recycling.
FCC Compliance Information
Part 15 Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328. These
limits are designed to provide reasonable protection against harmful interference
in residential installations. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television equip-
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ment reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
x Reorient or relocate the receiving antenna.
x Move the equipment away from the monitor.
x Plug the equipment into an outlet on a circuit different from that to which the moni-
tor is connected.
x Consult the dealer or an experienced radio/television technician for additional sug-
gestions.
# cautIon! any changes or modifications to this equipment not
expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
RF Exposure Information
The antenna used for this transmitter must be installed to provide a separation
distance of at least 20 cm (7.9”) from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter.
IC Compliance Information
Radio Equipment Notice
The term “IC:” before the radio certification number only signifies that Industry
Canada technical specifications were met. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. “Privacy of communications may not be ensured when
using this device”.
CE Compliance Information
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Volt-
age Directive (73/23/EEC); R&TTE(1999/5/EC) issued by the Commission of the
European Community. Compliance with these directives implies conformity to the
following European Norms:
x EMC: EN 301 489
x LVD: EN 60950
x Radio: EN 300 328
one-year Limited Warranty
# Important: evidence of original purchase is required for warranty
service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS
OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this
Uniden Product to be free from defects in materials & craftsmanship with only the
limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate & be
of no further effect 12 months after the date of original retail sale. The warranty is
invalid if the Product is (A) damaged or not maintained as reasonable or neces-
sary, (B) modified, altered, or used as part of any conversion kits, subassemblies,
or any configurations not sold by Uniden, (C) improperly installed, (D) serviced
or repaired by someone other than an authorized Uniden service center for a
defect or malfunction covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the owner’s manual
for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will either, at its op-
tion, repair or replace the defective unit & return it to you without charge for parts,
service, or any other cost (except shipping & handling) incurred by warrantor or
its representatives in connection with the performance of this warranty. Warran-
tor, at its option, may replace the unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE
WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABIL-
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this
exclusion or limitation of incidental or consequential damages so the above limi-
tation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also
have other rights which vary from state to state. This warranty is void outside the
United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that the Prod-
uct is defective, pack the Product carefully (preferably in its original packaging).
Disconnect the battery from the Product & separately secure the battery in its
own separate packaging within the shipping carton. The Product should include
all parts & accessories originally packaged with the Product. Include evidence of
original purchase & a note describing the defect that has caused you to return it.
The Product should be shipped freight prepaid, by traceable means, to warrantor
at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2013 Uniden America Corporation
Printed in China.
Download from Www.Somanuals.com. All Manuals Search And Download.
|