Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The Uniden 900MHz cordless phones are designed and engineered to exacting standards
for reliability, long life, and outstanding performance.
NOTE: Some illustrations in this manual may differ from the actual unit for explanation
purposes. The color of your cordless phone may vary.
•
900MHz Extended Range
Technology
• 10-Number Memory
Dialing
• Earpiece Volume Control
• AutoTalk™
• 20 Channel Autoscan
• Last Number Redial
• Find Handset Locator
• Hearing Aid Compatible
• Pulse/Tone Dialing
• One Touch RocketDial
Number
®
▼ Features
The cordless phone features include AutoTalk™ and AutoStandby™. AutoTalk allows you to
answer a call by just removing the handset from the base so you don’t have to waste time
pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the
base.
The UltraClear Plus™ true compander circuitry virtually eliminates background noise.
This innovative technology, together with 20 different channels, provides you with the best
possible reception during all your conversations.
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone has Random Code™ digital security which automatically
selects one of approx. 262,000 digital security codes for the handset and base. Also, the
AutoSecure™ feature electronically locks your phone when the handset is in the base.
®
RocketDial is a one-touch speed dial key that automatically dials your most important or
frequently called number. The number dialed, is a preset number stored by the user.
®
®
Uniden and RocketDial are registered trademarks of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of
Uniden America Corporation.
®
As an ENERGY STAR Partner, Uniden has determine that this product or
®
product models meets the ENERGY STAR guidelines for energy
®
efficiency. ENERGY STAR is a U.S. registered mark.
Controls and Functions
6. flash - accesses call waiting (if
available) (p.6)
1
7. /tone - switches to tone dialing in
2
3
pulse dial mode (p.5)
10
11
12
4
5
6
8. redial/pause - redials the last number
/ adds a timed pause in a memory
dialing sequence. (p.4)
15
16
17
find hs
9. Handset microphone and ringer
7
8
speaker
13
9
10. talk - answers or places calls (p.4)
14
11. end - end phone call/temporarilly
mutes incoming ring (p.4)
1. Handset antenna
2. Handset earpiece
3. talk/batt low LED - indicates when
phone is in use or the battery is low
4. m/mem - enters or recalls numbers
stored in memory dialing (p.6)
5. v/ /vol - ringer tone and earpiece
volume control (p.5)
12. RocketDial - one touch priority key
(p.7)
13. channel - selects another channel for
clearer reception (p.5)
14. Handset charging contacts
15. Base charging contacts
16. find hs - locates the handset (p.6)
17. charge / in use LED
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Included with Your Phone
• Base
• Handset
• AC Adapter
• Telephone Cord
• Rechargeable Battery
Replacement adapters, batteries and other parts may be purchased on Uniden’s website
Setting up the Phone
Do the following steps:
A. Choose the best location
C. Connect the base unit
B. Install the rechargeable battery pack into the handset
D. Choose the dialing mode
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS
included in the PRECAUTIONS.
Here are some important guidelines you should consider:
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid microwave ovens
Avoid television sets and
Avoid excessive moisture,
other electronic equipment
extremely low temperatures,
dust, mechanical vibration,
or shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet which
is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit.
Charge the handset battery pack for at least 15-20 hours before using your new cordless
telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT
plug the telephone cord into the base unit and wall jack until the battery is fully charged.
NOTE: If your home has specially wired alarm equipment connected to
the telephone line, be sure that installing the system does not
disable your alarm equipment. If you have questions about what
will disable your alarm equipment, contact your telephone
company or a qualified installer.
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to remove.
2) Plug the battery pack connector (red & black wires) into the jack
inside the battery compartment (the connector notches fit into the
grooves of the jack only one-way). Match the wire colors to the
polarity label in the battery compartment, connect the battery and
listen for a click to insure connection.
3) Before replacing the battery cover, make certain the battery pack is
securely connected by slightly pulling on the battery wires. Then
place the battery case cover back on the handset by sliding it
upwards until it clicks into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
4) Place the handset in the base with the keypad facing forward.
NOTE: For optimum performance use only the Uniden Battery
(BT-904) supplied with your phone. Replacement batteries
are also available through the Uniden Parts Department at
(800) 554-3988, Monday through Friday from 8:00 a.m. to
5:00 p.m. or online at www.uniden.com
find hs
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the phone is not in use, the talk/batt low LED
flashes when the battery pack is low.
If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base for charging.
NOTE: • Even when the battery pack is not being used, it will gradually discharge over a
long period of time. For optimum performance, be sure to return the handset to the
base unit after each telephone call.
• Dial mode setting, last number dialed and numbers stored in memory locations
(including RocketDial), are retained for up to 1 minute while you replace the
battery pack.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the charging contacts on the
handset once a month.
Using water only, dampen a cloth to clean the charging
contacts. Then make sure to go back over the charging
contacts with a dry cloth before returning the handset to the
base to charge.
Caution: Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of the
telephone and damage the finish.
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack
and a standard 120V AC wall outlet.
2) Set the base unit on a desk or tabletop, and
place the handset in the base unit.
Route thhe cord.
3) Make sure the charge/in use LED illuminates.
If the LED does not illuminate, check to see that
the AC adapter is plugged in and the handset
makes good contact with the base charging
contacts.
NOTICE: Place the power cord so it does not
create a trip hazard or where it could
become chafed and create a fire or
electrical hazard.
NOTE: • Use only the supplied AD-0001 AC adapter. Do not use any other AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter
easily.
After installing the battery pack in the handset, charge your handset at least 15-20 hours
before plugging into the phone line.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and a telephone outlet.
TIP:
If your telephone outlet isn’t
modular, contact your telephone
company for assistance.
Modular
D. Choose the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines.
However some phone systems still use pulse dialing such as in rural areas. The default
setting is tone dialing. Depending on your dialing system, set the mode as follows:
1) Press and hold the flash key until you hear a confirmation tone in standby mode.
2) To set the dial mode for pulse dialing, press the # key. Or to set the dial mode for tone
dialing, press the /tone key. A confirmation tone sounds to indicate the setting is
complete.
NOTE: • Make sure your battery pack is fully charged before choosing the dial mode.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call. If
the call connects, leave the setting as is. Otherwise set for pulse dialing.
• If your phone system requires pulse dialing and you need to send DTMF tones
for certain situations during a call, you may “switch-over” to tone dialing (Refer to
“Tone Dialing Switch-over”).
Using Your Phone
Making and Receiving Calls
Handset On Base
Handset Off Base
When the phone rings, remove
the handset from the base
(AutoTalk).
Press the talk, /tone, #, or any
number key.
Receive call
1) Remove the handset from the
1) Press the talk key.
base and press the talk key.
Make call 2) The talk/batt low LED
2) The talk/batt low LED flashes
flashes and turns on.
and turns on.
3) Listen for the dial tone.
4) Dial the number.
3) Listen for the dial tone.
4) Dial the number.
Hang up
Redial
Press the end key or return the handset to the base (AutoStandby).
1) Remove the handset from the
1) Press the talk key.
base and press the talk key.
2) Listen for the dial tone.
2) Listen for the dial tone.
3) Press the redial/pause key
3) Press the redial/pause key to dial
to dial the last dialed number.
the last dialed number.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
• Talk Mode - The handset is off the base and the talk key has been pressed, enabling a
dial tone.
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The
talk key has not been pressed and there is no dial tone.
Adjusting the Ringer and Earpiece Volume
Ringer tone
When the phone is in standby mode, press the v/ /vol key repeatedly to listen to the two
ringer tone options. The last ringer tone selected/heard will be the phone’s ring tone setting.
Earpiece volume
The handset earpiece volume settings (Low, Medium and High) can only be adjusted during
a call. Press the v/ /vol key repeatedly to scroll between and select the volume level that
works best for you. When you hang up, the phone keeps the volume setting.
Temporarily Mute Ringer
If the handset is off the base, simply press the end key to temporarily mute the incoming
ring. The ringer will sound with the next incoming call.
Redial
The redial/pause key redials the last number dialed.
The redialed number can be up to 24 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need to enter
tone dialing digits, you can switch-over to tone dialing during the call.
This feature is useful when you need tone dialing to use automated
systems, for example, entering your bank account number after you
have called your bank.
Initially make your call with the pulse dialing mode. Once your call
connects, press the /tone key. Enter the desired number. These
digits will be sent as tone dialing. This special number can be stored
in a memory location. This is referred to as “Chain Dialing”. Once the
call ends, the tone mode is canceled and pulse dialing mode
resumes.
NOTE: The tone feature only applies when the dial mode is set to pulse.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate within
5 minutes.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.
Press the channel key. The talk/batt low LED flashes, indicating the phone is changing to
another channel. For more information on interference, refer to “Precautions”.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Find Handset
To locate the handset (while it’s off the base), press the find hs key on the base. The handset
beeps for 60 seconds.
Paging is canceled when pressing any handset key, the find hs key on the base or the
handset is returned to the base.
NOTE: Paging is also canceled when the phone receives an incoming call.
Flash and Call Waiting
If you have “Call waiting” service and a call waiting tone sounds
while you are on a call, press the flash key to accept the waiting call.
There is a short pause, then you will hear the new caller. To return to
the original caller, press the flash key again.
NOTE: You must subscribe through your local telephone company to
receive Call Waiting Service.
Storing a Phone Number in Memory
Your cordless phone has 1 RocketDial memory location and 10
additional memory locations for storing important telephone numbers.
You can store your most frequent dialed number in the one-touch
RocketDial location.
1) Press the m/mem key in standby mode. The talk/batt low LED
flashes.
2) Enter the phone number by using the keypad, /tone or #, up to
20 digits. If a pause is needed during the dialing sequence, press
the redial/pause key to insert a pause. Each pause counts as a
digit and represents a two second delay in time between digits as
they are sent.
3) Press the m/mem key again.
To actually store a number in its designated location;
4) Press the RocketDial key.
or
4) Press memory location (0-9) on the keypad to store a number.
A tone indicates that the number is stored. If you enter a number in a location that has a
previously stored number, it will overwrite the existing number without warning.
NOTE: • The pause key counts as one digit. Pressing the redial/pause key more than
once increases the length of pause between numbers.
• In memory storing operation, you must press a key within 30 seconds or the
handset will beep rapidly and the phone will return to standby mode.
• Memory location for the RocketDial is independent from the memory locations for
Memory Dial.
Dialing a Stored Number
Using the memory location features
1) Press the talk key in standby mode, then press the m/mem key.
2) Enter the memory location (0-9) on the keypad. The stored number automatically dials.
NOTE: If you select a memory location that does not have a stored number, the handset
will beep rapidly and the phone will not dial.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
One-touch RocketDial
Your phone is equipped with “One-touch RocketDial” for instant dialing.
It is used to dial the phone number stored in the one-touch RocketDial
location (See “Storing a Phone Number in Memory Dial”).
To instantly dial the phone number stored in the one-touch RocketDial
location, simply press the RocketDial key in standby mode. (There is
no need to press the talk key. The phone will automatically dial). If you
press the RocketDial key and a phone number is not stored in the
one-touch RocketDial location, an error tone will sound and the phone
will not dial.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also store
a group of numbers (up to 20 digits) that you need to enter once your call connects. This is
referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are
prompted to enter the account number, simply press the m/mem key and the location number
where the special number has been stored.
Store your special number in memory as you would store a phone number (Refer to
“Storing a Phone Number in Memory Dial”).
Erasing a Stored Number from Memory
1) Press the m/mem key twice in standby mode.
2) Press the RocketDial key or the memory location (0-9). A tone indicates that the stored
number is erased from memory.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base
unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare
situation that you suspect another cordless telephone is using the same security code, you
can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit. Leave the handset in
the base for more than 3 seconds. A new random security code is set.
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically next time the battery pack is charged.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Troubleshooting
If your cordless telephone is not performing to your expectations, please try these simple
steps.
NOTE: Do not attempt to service this unit yourself. Servicing must be performed by
qualified personnel.
Symptom
Suggestion
The charge/in use LED won’t
illuminate when the handset
is placed in the base.
•
•
•
Make sure the AC adapter is plugged into the base and a wall outlet.
Make sure the handset is properly seated in the base.
Make sure that the charging contacts on the handset are clean.
The audio sounds weak
and/or scratchy.
•
Move the handset and/or base to a different location away from
metal objects or appliances and try again.
Press the channel key to help eliminate background noise.
•
Can’t make or receive calls.
•
•
•
•
•
Check both ends of the telephone line cord.
Make sure the AC adapter is plugged into the base and a wall outlet.
Disconnect the AC adapter for a few minutes, then reconnect it.
Change the digital security code (see page 7).
Make sure that the handset is not too far from the base.
The handset doesn’t ring or
receive a page.
•
The Nickel-Cadmium battery pack may be weak. Charge the
battery for 15-20 hours.
The handset may be too far away from the base.
Place the base away from appliances or metal objects.
Change the digital security code (see page 7).
•
•
•
Severe noise interference
•
Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
Move to another location or turn off the source of interference.
•
•
If you still have a problem
Call our customer hotline at 1-800-297-1023.
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion,
please read the following steps.
Case
Action
If the handset or base is exposed to
moisture or liquid, but the liquid only
affects the exterior plastic housing.
Wipe off the liquid, and use as normal.
Handset:
If moisture or liquid has entered
the plastic-housing (i.e. liquid can
be heard in the phone or liquid
has entered the handset battery
compartment or vent openings
on the base).
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at
least 3 days.
4. Once the handset is completely dry, reconnect the battery pack and
the battery cover.
5. Recharge the handset’s battery pack for 20 hours in the base unit
before using the phone.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical
power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while
recharging the battery pack to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work,
please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX 76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
Download from Www.Somanuals.com. All Manuals Search And Download.
8
on it.
Precautions!
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
Before you read anything else, please observe the following:
10.Never push objects of any kind into this product through
cabinet slots, as they may touch dangerous voltage points or
short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this
product. Take it to qualified service personnel when service or
repair work is required. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect reassembly
can cause electric shock when the appliance is subsequently
used.
12.Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following
the operating instructions. (Adjust only those controls
that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and
will often require extensive repair work by a qualified
technician.)
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage
to the unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Cadmium Battery
Warning
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to
cause cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in
this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual. Using
another charger may damage the battery or cause the battery to
explode.
•
•
•
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
E. If the product has been dropped or the cabinet has
been damaged.
F. If the product exhibits a distinct change in
performance.
•
Uniden voluntarily participates in an
RBRC® industry program to collect and recycle nickel-cadmium
batteries at the end of their useful life, when taken out of
service within the United States. The RBRC® program provides a
convenient alternative to placing used nickel-cadmium batteries
into the trash or municipal waste stream, which is illegal in
some areas.
13.Do not use the telephone to report a gas leak in the vicinity of
the leak.
Additional Battery Safety Precautions
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
•
Through the RBRC® program, Uniden makes it easy for you to
drop off the used battery at local retailers of replacement
nickel-cadmium batteries. You may also contact your local
recycling center for information on where to return the used
battery. Please call 1-800-8-BATTERY for information on Ni-Cd
battery recycling in your area. Uniden's involvement in this
program is part of its commitment to protecting our
environment and conserving natural resources.
1. Use only the Uniden battery pack specified in the owner’s
manual.
2. Do not dispose of the battery pack in a fire. The cell may
explode. Check the nickel-cadmium battery disposal package
insert for disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte
is corrosive and may cause damage to the eyes or skin. It may
be toxic if swallowed.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in the owner’s manual provided for this
product.
•
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
6. Observe proper polarity orientation between the battery pack
and battery charger.
Uniden works to reduce lead content in our PVC coated cords in
our products and accessories.
WARNING: The cords on this products and/or accessories
contain lead, a chemical known to the State of California to cause
birth defects or other reproductive harm. Wash hands after
handling.
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm
is approaching. Lightning can pass through your household wiring
and damage any device connected to it. This phone is no
exception.
Important Safety Instructions
When using your telephone equipment, these basic safety
precautions should always be followed to reduce the risk of fire,
electrical shock, and injury to persons:
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as
detailed by the owner’s manual, could void your authority to
operate this product. Your telephone compiles with Part 68 of FCC
Rules. You must, upon request, provide the FCC registration number
and the REN to your telephone company. Both numbers are on the
base unit.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a
bathtub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from
overheating, these openings must not be blocked or covered.
This product should never be placed near or over a radiator or
heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your dealer or
local power company.
NOTE:
You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful, interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation. Privacy of communications may not be
ensured when using this phone.
Range
Your new phone is designed to achieve the maximum possible
range by transmitting and receiving according to the highest
specifications set forth by the FCC. We have rated this phone to
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
Download from Www.Somanuals.com. All Manuals Search And Download.
9
operate at a maximum distance with the qualification that the
range depends upon the environment in which the telephone is
used. Many factors limit range, and it would be impossible to
include all the variables in our rating. The Maximum Range rating
of this phone is meant to be used as a means of comparison
against other range claims.
about the proper adapter or converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone
cords:
Caution!
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
Telephone Line Problems
The FCC has granted the telephone company the right to
disconnect service in the event that your phone causes problems
on the telephone line. Also, the telephone company may make
changes in facilities and services which may affect the operation of
your unit. However, your telephone company must give adequate
notice in writing prior to such actions to allow you time for making
necessary arrangements to continue uninterrupted service.
If you are having trouble with your telephone service, you must
first disconnect your phone to determine if it is the cause of your
problem. If you determine that it is the cause, you must leave it
disconnected until the trouble has been corrected.
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC
plug when the phone is placed on a desk or table, wrap the power
cord around the strain relief notch on the back of the base.
NOTE:
Place the power cord so that it does not create a
trip hazard, or where it could become chafed and
create a fire or other electrical hazards.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit
is NOT DEFECTIVE. If these noises continue and are too distracting,
please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance
because of the potential for interference. Be certain that the
antenna on the unit is fully extended when needed.
I.C. Notice
TERMINAL EQUIPMENT
Notice: This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specifications. This is confirmed by
the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed based
on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry
Canada approved the equipment.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving
radio signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate
at frequencies that may cause interference to nearby TVs and VCRs.
To minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the
interference.
Notice: The Ringer Equivalence Number (REN) for this terminal
equipment is marked on the equipment itself. The REN assigned to
each terminal equipment provides an indication of the maximum
number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not
exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
More Than One Cordless Telephone
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device. “Privacy of communications may not be
ensured when using this telephone”.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be private.
Installation Considerations
Selecting a Location
Before choosing a location for your new phone, there are some
important guidelines you should consider:
•
The location should be close to both a phone jack and
continuous power outlet. (A continuous power outlet is an AC
outlet which does not have a switch to interrupt its power.)
Keep the base and handset away from sources of electrical
noise such as motors or fluorescent lighting.
•
•
•
The base can be placed on a desk or tabletop.
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
Telephone Line Outlets
TMhoerdeualreartwJoatcykpes of phone outlets:
Most phone equipment available now uses modular jacks. Phone
cords are fitted with a molded plastic connector which plugs into
this type of jack. If you do not have modular phone jacks, contact
your local telephone company for information about their
installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types
of installations require a modular jack converter. This type of
installation is not difficult; however, you should contact your
Uniden telephone dealer or a telephone supply store for advice
Download from Www.Somanuals.com. All Manuals Search And Download.
10
|