Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug the AC
Note: There are five setup options available. They are
Caller ID options [Auto Talk, CIDCW (Caller ID on Call
Waiting), Area Code], Dial Mode and Language.
Step 1 Checking the Package Contents
adapter cord into
the base unit and
then into a 120V
AC outlet.
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
D
E
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
Use only AC
adapter included
with your phone.
Press and hold call id/menu.
A
• Base unit
Uniden Parts Department at
• Handset
Press vol/
/
or vol/
/
to move
(800) 554-3988
• AC adapter
B
C
D
the pointer to an option.
Place the handset in the base and charge
continuously for 15 - 20 hours before using
the phone.
Hours: M-F 8:00 a.m. to
• Rechargeable battery
5:00 p.m. CST.
• Telephone cord
• Beltclip
Press select to change the option setting.
We can also be reached on
the web at www.uniden.com
• Wall mount adapter
• This owner’s manual
• Other printed
material
Press end to exit, and return the handset
to the base.
Step 3 Connect to Phone Line
OPTIONS INCLUDE
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Auto Talk On/Off
A
B
Step 2 Install and Fully Charge the Battery
CIDCW On/Off
TO INSTALL THE HANDSET BATTERY
(Caller ID on call waiting)
Area Code Enter/Remove
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dialing mode” on page 16.
Remove the cover.
A
C
D
E
Dial
Pulse/Tone
Language English/French/Spanish
Connect the battery pack
connector with the
B
correct polarity.
Step 5 Set Answering System
Step 4 Setting Menu Options
The answering system is on by
default.
charge
in use
vol
A pre-recorded greeting will
play and your system
is ready to accept calls.
To record a personal outgoing
greeting to callers, please see
page 46.
Replace the cover.
C
memo
rec
volume SELECT
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
redial
pause
select
delete memory
channel
www.uniden.com
QUICK REFERENCE GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 3 ]
Contents
Making Calls with the RocketDial
30
31
Quick Reference Guide
Welcome/Features
Controls and Functions
3
5
6
Deleting the RocketDial
Caller ID Features
Caller ID and CIDCW (Caller ID on Call Waiting) 32
Getting Started
When the Telephone Rings
32
33
34
36
Setting up the Phone
8
13
15
Viewing the Caller ID Message List
Deleting Information from the Caller ID List
Using the Caller ID List
Mounting the Base Unit on a Wall
Setting Menu Options
Basics
The Integrated Answering Device
The Integrated Answering Device
Features
Turning the Answering System On/Off
Setting Up Your Answering System
Using Your Answering System
Making and Receiving Calls
Adjusting the Handset Ringer and
Earpiece Volume
18
38
38
39
40
48
19
20
20
20
21
21
21
Redial
Tone Dialing Switch Over
Traveling Out-of-Range
Selecting a Different Channel
Find Handset
Additional Information
Changing the Digital Security Code
Installing the Beltclip
Headset Installation
Note on Power Sources
Maintenance
55
55
55
56
56
57
60
61
63
64
Flash and Call Waiting
Memory Dialing
Storing Phone Numbers and Names
22
Steps for Entering Names and Special Characters 24
Troubleshooting
Making Calls with Memory Dialing
Chain Dialing
Editing a Stored Name and/or Phone Number
Erasing a Stored Name and Phone Number
25
26
27
29
General Information
Precautions & Warranty
I.C. Notice
Index
RocketDial
RocketDial
30
30
Storing and Editing the RocketDial
[ 4 ]
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden cordless phone. This cordless phone is
designed and engineered to exacting standards for reliability, long life, and outstanding
performance.
Welcome
Features
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes. The color of your cordless telephone may vary.
®
As an ENERGY STAR Partner, Uniden has determined that this product or
®
product models meets the ENERGY STAR guidelines for energy efficiency.
ENERGY STAR is a U.S. registered mark.
®
• 5.8 GHz Extended Range Technology
• 32 Digit Redial
• Caller ID and Caller ID on Caller Waiting
• 3 Line Backlit Display
• Flash and Pause
• Tone/Pulse Dialing
• Page/Find handset
• Integrated Telephone Answering Device
(ITAD)
• Earpiece Volume Control
• Ringer Volume Control (High-Low-Off)
• Hearing Aid Compatible
• 20 Channel Autoscan
• Trilingual Voice Prompts (English, French
or Spanish)
• 10 Number Memory Dialing
• RocketDial
• English, French or Spanish Display Option
®
®
Uniden and RocketDial are registered trademarks of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of
Uniden America Corporation.
[ 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
1. Handset antenna
2. Beltclip hole
1
3. Optional headset jack
4. Handset battery compartment
5. Handset earpiece
5
6. LCD display
7. call id (Caller ID)/menu key
2
8. vol/
9. vol/
/
/
(volume & scroll) key
(volume & scroll) key
(left cursor) key
6
call id/menu
RocketDial
10.
/tone/
7
8
9
14
15
16
3
4
11. redial/pause key
12. select key
13. Handset microphone and
ringer speaker
vol
14. RocketDial key
15. end key
10
11
12
13
17
18
19
redial
pause
select
delete memory
channel
16. talk/flash key
17. #/
(right cursor) key
18. memory key
19. delete/channel key
20. Handset charging contacts
20
[ 6 ]
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
21.
22. volume/SELECT
23. memo/rec (record) key
(repeat/rewind) key
(up) key
24. volume/SELECT
(down)
key
38 39
28
25. answer on/off key
26. ringer key
27. Base charging contacts
28. Base antenna
29. charge/in use LED
29
30
31
32
charge
in use
21
22
memo
rec
23
30.
31.
32.
(play/stop) key
(skip/fast forward) key
(delete) key
volume SELECT
24
33
34
35
36
25
26
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
33. MENU/CLOCK key
34. greeting key
35. find hs key
mic
37
27
36. set key
37. mic (microphone)
38. DC IN 9V jack
39. Telephone line jack
www.uniden.com
CONTROLS AND FUNCTIONS
[ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
C. Connect the base unit
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION
CONSIDERATIONS included in the PRECAUTIONS. Here are some important guidelines
you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
Avoid television sets and other
electronic equipment
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet
which is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
[ 8 ]
GETTING STARTED
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack.
The battery recharges automatically when the handset is
placed in the base unit.
Charge the handset battery pack for at least 15-20
hours before using your new cordless telephone for the
first time! To maximize the charge capacity of your battery
pack, DO NOT plug the telephone cord into the base unit
and wall jack until the battery is fully charged.
For optimum
performance use only
the Uniden BT-800
rechargeable battery
pack supplied with your
phone.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into
the small jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery, and listen for
a click to insure connection.
3) Make sure you have a good connection by slightly pulling
on the battery wires. If the connection is secure, the
battery jack will remain in place.
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 9 ]
4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
5) Place the handset in the base unit face forward for 15-20
hours without interruption. The base unit’s LED light
(labeled as charge/in use) illuminates once the handset is
placed in the base. The LED light will illuminate regardless
if the battery pack is connected or not.
• Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday through Friday
from 8:00 a.m. to
5:00 p.m. or online at
If the base charge/in use LED light does not illuminate:
• Check to see if the AC adapter is plugged into the base
unit and the electrical wall outlet properly. (Use only the
supplied AC adapter. Do not use any other AC adapter.)
• Check to see if the handset is sitting correctly on the
base and making good contact with the base unit’s
charging contacts.
• The handset should
always sit in charging
cradle face forward to
make good contact
with base unit’s
charge contacts.
[ 10 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order to
save power. If the phone is not in use, Low Battery appears
on the LCD and none of the keys will operate.
If the phone is in use, Low Battery flashes and the handset
beeps. Complete your conversation as quickly as possible and
return the handset to the base unit for charging.
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period
of time. For optimum
performance, be sure
to return the handset
to the base unit after
a telephone call.
The last number dialed in the redial memory, the names and the numbers stored in the
memory locations and CID list are retained for up to 30 minutes while you replace the
battery pack.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both the handset and base unit once
a month. Using water only, dampen a cloth to clean the
charging contacts. Then make sure to go back over the
charging contacts with a dry cloth before returning the
handset to the base to charge.
• Talk Mode -
The handset is off the
base and talk/flash
has been pressed,
enabling a dial tone.
• Standby Mode -
The handset is not in
use. The handset may
be in or off the base,
but talk/flash has
not been pressed.
Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and damage the finish.
GETTING STARTED [ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Connect the base unit
Route the cord.
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and
place the handset in the base unit.
Use only the supplied
AD-314 AC adapter.
Do not use any other
AC adapter.
3) Make sure that the charge/in use LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in
and that the handset makes good contact with the base charging contacts.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
• After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line. Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
4) Connect the telephone line cord to the TEL LINE jack and
to a telephone outlet once the handset is fully charged.
electrical hazard.
If your telephone outlet isn't modular,
contact your telephone company
for assistance.
Modular
[ 12 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
DO NOT use an AC
outlet controlled by
a wall switch.
1) Snap the wall mount adapter into the notches on
the bottom of the base.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded
wiring channel as shown.
4) Plug the AC adapter into a standard 120V AC
wall outlet.
7
Wall plate
6
5) Plug the telephone line cord into the TEL LINE
jack. Wrap the cord inside the molded wiring
channel as shown.
7
3
AC outlet
AC
adapter
6) Plug the telephone line cord into the telephone
outlet.
5
4
2
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
GETTING STARTED [ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable
for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw heads
for mounting the phone.
2) Refer to steps 1 through 7 on page 13 to mount the telephone.
[ 14 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Setting Menu Options
There are five setup options available. They are Caller ID options (AutoTalk, CIDCW
[Caller ID on Call Waiting], Area Code), Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the talk/flash button.
If the phone rings when AutoTalk is on, simply remove the handset from the base
and the phone automatically answers the call. If the phone rings when AutoTalk
is off, you must press talk/flash to answer the call.
• If your calling area
requires 10-digit
dialing, do not
Caller ID options
program the Area
Code option.
To change your AutoTalk and CIDCW:
1) Press and hold call id/menu in standby mode. The following
screen appears.
• The cordless phone
features include
2) Use vol/
/
or vol/
/
to move the pointer to the
TM
AutoTalk and
TM
selection that you would like to change.
AutoStandby .
AutoTalk allows you
to answer a call by
just removing the
handset from the base
so you don't have to
waste time pushing
buttons. AutoStandby
allows you to hang up
by simply returning
the handset to the
base.
Press select to toggle between On and Off for AutoTalk and CIDCW.
3) Press end and return the handset to the base unit to complete the setting.
The handset returns to standby mode.
To enter your Area Code:
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
GETTING STARTED [ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
1) When the phone is in standby mode, press and hold
call id/menu. The Caller ID setting screen appears.
2) Press vol/
/
twice to select Area Code.
3) Press select.
4) Use the number keys (0 - 9), or delete/channel to enter the
3-digit area code.
5) Press select. A confirmation tone sounds and the displayed area code is entered.
6) Press end or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use
delete/channel and the number keys to enter the new area
code. Then press select. A confirmation tone sounds.
To complete the setting, press end or return the handset to the
base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems (such as those in rural areas) still use pulse
dialing. The default setting is tone dialing. Depending on your dialing system, set
the mode as follows:
Make sure your battery
pack is fully charged
before choosing the
dialing mode.
[ 16 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
1) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
2) Press vol/
/
three times to select Dial.
3) Press select to toggle between Tone and Pulse for
each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
• If you are not sure of your dialing system, set for tone dialing and make a trial call.
If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "Switch Over" to tone dialing. (Refer to
"Tone Dialing Switch Over" on page 20.)
Setting the language
1) When the phone is in standby mode, Press and hold
call id/menu. The following screen appears.
2) Press vol/
/
four times to select Language.
There are three
3) Press select to toggle Eng (English), Fr. (French) or Esp
languages to choose
from; English, French
and Spanish.
(Spanish) for each setting.
4) Press end or return the handset to the base unit to complete the setting. The
handset returns to standby mode.
GETTING STARTED [ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
Handset On Base
Handset Off Base
Pick up the handset (AutoTalk:
Press talk/flash (AutoTalk: Off),
To receive
a call
On) or pick up the handset and
or press talk/flash,
/tone/
,
Refer to page 15
press talk/flash (AutoTalk: Off).
#/
or any number key
"Setting Menu Options"
to turn On the AutoTalk
feature if desired.
(AntoTalk: On).
1) Pick up the handset.
2) Press talk/flash.
1) Press talk/flash.
2) Listen for the dial tone.
3) Enter the number.
3) Listen for the dial tone.
4) Enter the number.
To make
a call
OR
OR
1) Pick up the handset.
Enter the number, then press
talk/flash.
2) Enter the number, then press
talk/flash
.
Press end or return the handset to the base (AutoStandby).
To hang up
To redial
1) Pick up the handset.
2) Press talk/flash.
3) Listen for the dial tone.
4) Press redial/pause.
1) Press talk/flash.
2) Listen for the dial tone.
3) Press redial/pause.
OR
OR
1) Pick up the handset.
2) Press redial/pause, then
press talk/flash.
Press redial/pause, then press
talk/flash.
[ 18 ] BASICS
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Handset Ringer and Earpiece Volume
Handset ringer tone and volume
call id/menu
RocketDial
Press the volume up key or volume down key (labeled as
vol/
/
or vol/
/
) in standby mode to select one of five
ringer tones and volume combinations.
vol
Earpiece volume
Press the volume up key or volume down key (labeled as
vol/
/
or vol/
/
) during a call to change the earpiece
volume of the handset. This setting will remain in effect after
the telephone call has ended.
Temporarily Mute Ringer
If the handset is off the base, simply press end to temporarily mute the incoming
ring. The ringer will sound with the next incoming call.
BASICS [ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Redial
The redial/pause key redials the last number dialed. The redialed number can be up
to 32 digits long.
Tone Dialing Switch Over
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing).
• The tone feature only
applies when the dial
mode is set to pulse.
redial
pause
select
delete memory
channel
If you need to enter tone dialing digits, you can switch
over to tone dialing during the call. This feature is useful
when you need tone dialing to use automated systems, for
• This special number
can be stored in a
memory location. This
is referred to as Chain
Dialing (See page
26).
example, entering your bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press
/tone/ . Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 1 minute.
[ 20 ] BASICS
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone´s channel for clear operation. This function works only when the phone is
in use. Press delete/channel. Scanning appears on the display, indicating the
phone is changing to another channel. For more information on interference, refer to
"Precautions" on page 62.
TM
The UltraClear Plus
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
Find Handset
charge
in use
To locate the handset (while it's off the base), press
find hs on the base. The handset beeps for 60 seconds.
memo
rec
volume SELECT
Paging is canceled when pressing any key on the handset or
the handset is returned to the base.
conversations.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
Flash and Call Waiting
hint
call id/menu
RocketDial
If you have "Call Waiting" service and a call waiting tone
sounds while you are on a call, press talk/flash to accept
the waiting call. There is a short pause, then you will hear
the new caller. To return to the original caller, press
talk/flash again.
vol
You can cancel paging
by pressing find hs on
the base.
You must subscribe through your local telephone company to
receive Call Waiting service.
BASICS [ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 10 names/numbers in the handset.
1) Press memory in standby mode, Select Memory is displayed.
Select Memory
01
02 JOHN DOE
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return
the handset to the
base, the phone will
return to standby
2) Press vol/
/
or vol/
/
, or enter a number
(1 - 0) to select the memory location where you would
like to store the number.
3) Press memory or select.
01:(Empty)
Press Select
to edit
4) Press memory or select. The Store Name screen appears and
a cursor flashes indicating that the display is ready for the
name to be entered.
mode also.
Store Name
• You have 30 seconds
after pressing
memory or select to
enter the number you
wish to store.
If the Edit screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
Go Back to choose another location.
Edit Memory01
Delete Memory01
Go Back
Otherwise, an error
tone will sound and
the phone will returns
to standby mode.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters" (see page 24).
• Use #/ and /tone/ to move the cursor to the desired location.
• Use delete/channel to delete characters as needed.
• Press and hold delete/channel to delete all the characters.
• If a name is not required, go to step 6.
[ 22 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
6) Press memory or select. Store Numberis displayed.
The cursor flashes indicating that the display is ready for
the number to be entered.
Store Number
7) Use the number keys,
phone number.
/tone/
or #/
to enter the
The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
The phone number cannot exceed 20 digits.
Use redial/pause to enter a pause in the dialing sequence.
The display shows a P. Each pause counts as one digit and
represents a two second delay of time between the digits.
Use delete/channel to delete digits as needed.
Store Number
8007303456
8) Press memory or select. You will hear a confirmation tone,
and the following screen appears. Memory storage is
complete.
Memory01 Stored
For example, if you store a name and number into memory
location number 01, the display shows Memory01 Stored.
After about 2 seconds, the following screen is displayed.
Repeat steps 2 - 8 to store more numbers.
01 Movies
02 JOHN DOE
03 MOM AND DAD
9) Press end to exit memory setup mode, returning to standby.
MEMORY DIALING [ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: Upper case letters first, lower case letters next and finally the number
corresponding to the key.
If the next character
uses the same number
key, you must press
If you make a mistake while entering a name
Use
/tone/
or #/
to move the cursor to the incorrect character.
to move the
#/
Press delete/channel to erase the wrong character, then enter the correct character.
cursor over. Otherwise
the next time you press
the number key, it
overwrite the existing
character.
To delete all characters, press and hold delete/channel.
For example, to enter Movies.
1) Pick up the handset. Press memory.
2) Enter a number or press vol/
/
or vol/
/
to select a memory location.
3) Press memory or select.
4) Press memory or select. (When there is information already stored in the select-
ed memory location, Edit MemoryXX is displayed. See page 27 for information
on “Editing a Stored Name and/or Phone Number”.)
5) Press 6 then press #/
6) Press 6 six times.
to move the cursor to the right.
7) Press 8 six times.
Number of times key is pressed
8) Press 4 six times.
9) Press 3 five times.
10) Press 7 eight times.
11) When finished, press memory or select.
keys
1
2
3
4
5
6
7
8
9
1
A
D
G
J
M
P
T
W
*
1
2abc
3def
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
4ghi
5jkl
5
6mno
6
To continue to store the telephone number,
proceed to step 7 on page 23.
r
s
7
9
7pqrs
8tuv
8
y
z
0
9wxyz
0oper
(blank)
[ 24 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Making Calls with Memory Dialing
Memory dialing from Standby Mode
1) Press memory. The handset displays your programmed memory
locations.
Select Memory
01 Movies
02 JOHN DOE
• If you press memory
or select before
talk/flash, you can
confirm the name and
the number stored in
the selected memory
location.
2) Press vol/
/
or vol/
/
, or enter the number (1 - 0)
to select the memory location you would like to dial.
3) Press talk/flash. Talk and the volume setting appear
Talk
8007303456
on the display. Then the displayed number is dialed.
• Whenever you are
using a memory menu
screen, you must
press a key within 30
seconds or the phone
will return to standby
mode.
To exit the memory function without dialing, press end.
The handset returns to standby mode.
MEMORY DIALING [ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory dialing from Talk Mode
1) Press talk/flash. Talk and the
volume setting appears.
Talk
Talk
Volume High
2) Press memory.
3) Press vol/
/
or vol/
/
, or enter a number
Select Memory
01 Movies
02 JOHN DOE
(1 - 0) to select the memory location of the desired phone
number. If you press select, the number is dialed.
4) The phone number in the memory will be dialed when the
Talk
8007303456
0:35
select is pressed.
5) To hang up, press end.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank and
are prompted to enter the account number, press memory and select the location
number where the special number has been stored. Then press select.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 22.)
[ 26 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Editing a Stored Name and/or Phone Number
1) Press memory in standby mode. Select Memory is
Select Memory
01 Movies
02 JOHN DOE
displayed.
2) Press vol/
/
or vol/
/
, or enter a number
01:Movies
8007303456
(1 - 0) to select the memory location you would like to
edit, and press memory or select.
3) Press memory or select.
Edit Memory01
Delete Memory01
Go Back
The following screen appears with the memory location
number that you have selected.
4) Press vol/
/
or vol/
/
to select Edit MemoryXX,
Store Name
Movies
then press memory or select. The following screen appears.
The cursor flashes indicating that the display is ready for
the name to be edited. When a name has not been stored,
the cursor appears at the beginning of the second line.
5) Use the number keys,
/tone/ , #/ , or delete/channel
to edit the name. (See page 22.) To edit only the phone
number, skip this step.
6) Press memory or select. The following screen appears.
The cursor flashes indicating that the display is ready for
the number to be edited.
Store Number
8007303456
MEMORY DIALING [ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
7) Use the number key,
/tone/ , #/ , redial/pause or
delete/channel to edit the phone number. The phone number cannot
exceed 20 digits (see page 23).
If you don´t want to change the phone number, skip this step.
8) Press memory or select. If you changed either name or
Replace Memory?
Yes
No
phone number, a confirmation display shows up. If it is
correct, press vol/
/
and press select. You hear a
confirmation tone, and the following screen appears. The
memory storage is complete.
For example, if you edit a name and number into memory
location number 01, the display shows Memory01 Stored.
After about 2 seconds, Select Memory is displayed.
Memory01 Stored
01 Movies
02 JOHN DOE
03 MOM AND DAD
9) Press end to return to standby mode.
[ 28 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Erasing a Stored Name and Phone Number
Select Memory
01 Movies
02 JOHN DOE
1) Press memory, Select Memory is displayed.
2) Press vol/
/
or vol/
/
, or enter a number
(1 - 0) to select the memory location you would like to
erase.
02:JOHN DOE
5452930
3) Press memory or select.
4) Press memory or select.
Edit Memory02
Delete Memory02
Go Back
The Edit screen appears with the memory location number
that you have selected in the display.
5) Press vol/
/
to move the pointer down to Delete
MemoryXX.
6) Press memory or select. The Delete MemoryXX? screen
Delete Memory02?
Yes
No
appears.
7) Press vol/
/
to move the pointer to Yes.
8) Press select or delete/channel.
You hear a confirmation tone, and the MemoryXX Deleted
screen appears.
Memory02 Deleted
9) After about 2 seconds, the display returns to the
Select Memory screen. You may delete the information in
another memory location (return to step 2) or press end to
return to standby mode.
01 Movies
02
03 MOM AND DAD
MEMORY DIALING [ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
RocketDial
You can store your most frequently dialed number in the RocketDial
location. The RocketDial allows you to dial a number with one key
press. (There is no need to press talk/flash. The phone will
automatically dial the number stored.) If you subscribe to voice
mail service, you can store your access number in this location.
call id/menu
RocketDial
vol
• RocketDial® is a
one touch speed
dial key that
automatically dials
your most
important or
frequently called
number. The
Storing and Editing the RocketDial
Store Number
1) When the phone is in standby mode, press and hold
RocketDial. The following display appears.
number dialed is a
preset number
stored by the user.
If the Edit screen appears, there is a number already stored.
Edit Number
Delete Number
Go Back
Press vol/
/
or vol/
/
to select Edit Number, then
press select.
• Number stored in
RocketDial is
independent from
the numbers stored
in Memory Dial.
Store Number
800
2) Store the number by following step 7 under "Storing Phone
Numbers and Names" on page 23.
3) Press select.
You hear a confirmation tone, and the Number Stored
screen appears. Memory storage is complete.
• If the RocketDial does
not have a stored
number, the handset
will beep rapidly and
the phone will not
dial.
Number Stored
Making Calls with the RocketDial
When the phone is in standby mode, simply press RocketDial. The number stored in
the RocketDial memory location is instantly dialed.
[ 30 ] ROCKETDIAL
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting the RocketDial
1) When the phone is in standby mode, press and hold
Edit Number
Delete Number
Go Back
RocketDial. The following display appears.
2) Press vol/
3) Press select. The following display appears.
4) Press vol/ to move the pointer to Yes.
/
or vol/
/
to select Delete Number.
Delete Number?
Yes
No
/
5) Press select or delete/channel.
You hear a confirmation tone, and the following display
appears. After about 2 seconds, the handset returns to
standby mode.
Number Deleted
ROCKETDIAL [ 31 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID services through your local telephone provider
to use these features.
When the telephone rings, the Caller ID feature allows you to view the caller´s name,
phone number, date and time of call. With Caller ID on Call Waiting, you will hear a
Call Waiting tone while you are on a call, and the Caller ID data is displayed. To
accept the waiting call, press talk/flash (see page 21). Additionally, you can dial a
number stored in the Caller ID list or save data to your Memory dial list.
• If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
When the Telephone Rings
1) When the Caller ID message is received, the display shows the caller´s phone
number along with the date and time. The incoming call information is stored
in the Caller ID record. If the Caller ID service includes the caller´s name, the
caller´s name appears on the display (up to 15 letters).
• When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone
The date and
time received
5/11 12:30PM
Jane Smith
214-555-1234
Caller's name
Caller's phone number
number and name
do not appear.
(This includes
international calls.)
You may receive any one of the following messages:
When invalid data is received
Incomplete Data
When a private name is received
When a private number is received
When a unknown name is received
Private Name
Private Number
Unknown Name
• When the call is via
a private branch
exchange (PBX), the
caller´s phone
number and name
may not appear.
When a unknown number is received Unknown Number
[ 32 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
2) When you pick up the phone, the display changes to Talk. (AutoTalk feature
is set to on.)
Data errors appear as ¨ ¨.
• In Caller ID operation,
if no key is pressed for
more than 30 seconds,
an error tone sounds
and the handset
Viewing the Caller ID Message List
returns to standby
mode.
The Caller ID list stores information for up to 30 messages (Caller ID
names/numbers) - even unanswered calls.
• If a call comes in via a
telephone system that
does not offer Caller
ID service, no
1) Press call id/menu.
Caller ID
New :01
Total:02
The summary screen appears. The screen shows the number
of new messages and total messages.
information is stored.
• Each message can be
up to 15 characters
for the phone number
and the name.
2) Press vol/
/
to display the latest Caller ID message.
5/17 12:30PM 03
Jane Smith
214-555-1234
3) Press vol/
/
to see the next message. Or press vol/
• The number of calls
from the same Caller
ID appears next to
the received time.
Once you view the
new message, the
number will be
/
key to see the previous message.
4) Press end to return to standby mode.
cleared and disappear.
CALLER ID FEATURES [ 33 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
The cordless phone stores up to 30 messages (Caller ID names/numbers). If the
phone receives the 31st message, the oldest one in the list is automatically deleted.
Caller ID data can also be deleted manually.
• While using the
Delete All? or
Delete Message?
screen, if no key is
pressed for more than
30 seconds, an error
tone sounds, and the
handset returns
Deleting a Caller ID message
1) Press call id/menu. Display the message to be deleted from
5/17 12:30PM 03
Jane Smith
214-555-1234
the Caller ID list by pressing vol/
/
or vol/
/
.
2) Press delete/channel.
Delete Message?
Yes
No
3) Press vol/
/
or vol/
/
to select Yes or No.
to standby mode.
• If you get an
4) Press select or delete/channel.
incoming call or page,
the deleting operation
is canceled and you
can answer the call or
page.
When the pointer is at Yes:
A tone sounds and the Caller ID message is deleted. The next Caller ID message is
then displayed.
When the pointer is at No:
The display returns to the Caller ID message.
Deleting all Caller ID names/numbers
1) Press call id/menu.
Caller ID
New :01
Total:02
2) Press delete/channel.
[ 34 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
3) Press vol/
/
or vol/
/
to select Yes or No.
Delete All?
Yes
No
4) Press select or delete/channel.
When the pointer is at Yes:
A tone sounds and all stored Caller ID messages
are deleted.
Caller ID
Total:00
When the pointer is at No:
The display returns to the summary screen.
Caller ID
New :01
Total:02
CALLER ID FEATURES [ 35 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The cordless phone stores up to
30 messages (Caller ID names/numbers).
Jane Smith
5/17 12:30PM 03
1) Press call id/menu. Select the phone number that you
want to dial by pressing vol/ or vol/
214-555-1234
/
/
.
• You cannot make a
call from the Caller ID
list if your cordless
telephone is
2) Press talk/flash. The displayed phone number dials
Talk
2145551234
automatically.
connected to a
private branch
exchange (PBX).
You can place a call from Talk Mode. Press talk/flash, then press
call id/menu. Select the phone number that you want to dial by
pressing vol/
The displayed phone number will be dialed.
/
or vol/
/
, then press select.
• When a long distance
call has been set, 1
appears in the
display.
Long Distance calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will
place the prefix 1 in the display to set up for a long distance call. Pressing 3 will
set or cancel an area code setting.
[ 36 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Storing Caller ID messages in Memory dialing
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in
memory dialing.
1) Press call id/menu.
5/17 12:30PM 03
Jane Smith
214-555-1234
Select the phone number to be stored from the Caller ID list
You cannot store a
Caller ID message if no
phone number appears
in the message.
by pressing vol/
/
or vol/
/
.
2) Press memory.
Select Memory
01
02 JOHN DOE
3) Press vol/
/
or vol/
/
or enter a number
(1 - 0) to select the memory location to be stored.
4) Press select.
You hear a confirmation tone, and the number is stored
in memory. The display returns to the Caller ID list.
5/17 12:30PM 03
Jane Smith
214-555-1234
If a message has already been stored in the selected memory
number location, a confirmation screen is displayed.
Replace Memory?
Yes
No
Press vol/
/
to select Yes. Press select to overwrite.
The display returns to the Caller ID list.
CALLER ID FEATURES [ 37 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
The Integrated Answering Device
The cordless phone has a built-in answering system that answers and records
incoming calls. You can also use your answering system to record a conversation,
leave a voice memo message, or to announce a special outgoing message to callers
when you're away from your phone.
Features
• Digital Tapeless Recording
• Up to 13 Minutes of Recording Time
• Call Screening
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Personal or Pre-recorded Outgoing
• Conversation Recording
• Voice Memo
Message
• Voice Prompts for Guidance
(English, French or Spanish)
• Selectable ringer options (high, low or
off)
Digital Tapeless Recording allows you to quickly review, save, or delete the messages
you choose. You will never have to worry about a tape wearing out, jamming, or
resetting improperly.
The Integrated Answering System is easy and convenient to use, but please read
through all of the instructions carefully.
[ 38 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Turning the Answering System On/Off
1) To turn the answering system on, press answer
on/off. The system will announce “Answering system
is on”. The current greeting message will be played,
and you will hear a confirmation tone. The message
counter displays the number of messages stored in
memory. If the display flashes, then there are new
messages waiting for you.
charge
in use
memo
rec
volume SELECT
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
2) To turn the answering system off, press answer
on/off again. After the announcement “Answering
system is off”, the message counter display will no
longer be illuminated. To turn the answering system
back on, press answer on/off.
mic
THE INTEGRATED ANSWERING DEVICE [ 39 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Answering System
Answering System Setting
To set the following six functions you must enter the menu mode.
• To scroll through the menu options, repeatedly press
MENU/CLOCK in standby mode. The system returns to
standby after the last menu option. You hear a
confirmation tone to indicate standby mode.
• If any of the following occurs during menu setup, the
system returns to standby. Start over the procedure of the
setting.
• For your convenience,
voice prompts will
guide you through the
menu mode.
MENU/CLOCK
"Time"
MENU/CLOCK
"Security Code"
MENU/CLOCK
• After the setting, press
"Ring Time"
the
key to exit
the menu mode, or
MENU/CLOCK to move
to the next menu
option.
MENU/CLOCK
"Record Time"
-Press talk/flash
MENU/CLOCK
-Press the
key
"Message Alert"
-Receive a call
MENU/CLOCK
• If the system remains idle for about 5 seconds after the
announcement, the system returns to standby. Once
"Language"
MENU/CLOCK
volume/SELECT/
idle time is extended to 10 seconds.
or volume/SELECT/
is pressed, the
Return to standby
with tone sound.
[ 40 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) Press MENU/CLOCK in standby mode.
The system announces “Time”, the current time and
the guidance for setting the time.
Press and hold
charge
in use
volume/SELECT/ or
volume/SELECT/ to
quickly scroll through
the numbers on the
display.
2) Press volume/SELECT/
or volume/SELECT/ until
memo
rec
the correct day is announced. The numbers [
]
volume SELECT
through [ ] are displayed on the base.
answer on/off
ringer
greeting
find hs
3) Press SET to select the day.
MENU/CLOCK
SET
4) Press volume/SELECT/
or volume/SELECT/
until
mic
you hear the correct hour setting. The numbers [
]
through [ ] are displayed on the base as each hour
is announced.
5) Press SET to select the hour.
6) Press volume/SELECT/
you hear the correct minute setting. The numbers
] through [ ] are displayed on the base as
each minute is announced.
or volume/SELECT/
until
[
THE INTEGRATED ANSWERING DEVICE [ 41 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
7) Press SET to select the minute.
8) Press volume/SELECT/ or volume/SELECT/
until you hear the correct AM or
PM setting. The message counter displays [ ] or [ ].
9) Press SET to select the AM/PM setting.
You hear a confirmation tone, then the announcement “Time” and the time and day
are announced for your review. After a few seconds, the system announces “To set
security code, press menu again”.
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit
Personal Identification Number (PIN) code (01-99). To select a PIN, perform the
following steps:
1) Press MENU/CLOCK twice in standby mode.
The system announces “Security code”, and the current PIN code is announced as
it is displayed on the base. Then the system announces the guidance for setting
the PIN code.
The PIN code is set to
"80" when you purchase
the cordless phone.
2) Press volume/SELECT/
or volume/SELECT/
until the desired number appears.
3) Press SET to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” followed by the new PIN code is announced. After a
few seconds, the system announces “To set ring time, press menu again”.
[ 42 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. Setting [
] (Toll Saver), the answering system
picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can
hang up after the second ring to avoid billing charges.
1) Press MENU/CLOCK three times in standby mode.
You hear “Ring time” and the current ring time ([ ] 2, [ ] 4, [ ] 6, [
]
Toll saver), and it is displayed on the base. Then you hear the guidance for setting
the ring time.
2) Press volume/SELECT/
or volume/SELECT/
until the desired ring time
appears.
3) Press SET to select the new ring time. You hear a confirmation tone, then the
announcement “Ring time” followed by the new ring time is announced. After a
few seconds, the system announces “To set record time, press menu again”.
THE INTEGRATED ANSWERING DEVICE [ 43 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Message Record Time
You have three record time options. The options "1 minute" or "4 minutes" set the
duration for recording the incoming messages. "Announce only" answers the call
with the preset greeting or your personal greeting but prevents the caller from
leaving a message.
After setting the
Announce only feature,
you may want to change
your outgoing message
not to prompt the caller
to leave a message.
However, the prerecorded
message changes
1) Press MENU/CLOCK four times in standby mode.
You hear “Record time” and the current recording time ([ ] 1 minute, [ ] 4
minutes, [ ] Announce only, No recording), and it is displayed on the base.
Then you hear the guidance for setting the record time.
2) Press volume/SELECT/ or volume/SELECT/ until the desired time appears.
automatically.
3) Press SET to select the new recording time. You will hear a confirmation tone,
then the announcement “Record time” followed by the new recording time is
announced. After a few seconds, the system announces “To set message alert,
press menu again”.
▼Announce only feature
The announce only feature plays a prerecorded outgoing message “Hello, no one is
available to take your call. Please call again.”, and it will not allow the caller to
leave a message. To set “Announce only”, follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press
greeting when the outgoing message is played. If you want to use your own greeting
or want to omit the prompt “to leave a message from your greeting”, refer to
“Recording a personal outgoing message (Greeting)” on page 46.
[ 44 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
1) Press MENU/CLOCK five times in standby mode.
You hear “Message alert” and the current setting ([
] Off or [
] On), and it
is displayed on the base. Then you hear the guidance for setting the Message
Alert.
2) Press volume/SELECT/
or volume/SELECT/
to make your selection.
3) Press SET to select the new setting. You hear a confirmation tone, then the
announcement “Message alert” followed by the current setting you have selected
is announced. After a few seconds, the system announces “To set language, press
menu again”. When the first new message is received, the alert tone will begin to
sound.
Turning the Message Alert tone Off by pressing any key.
1) To quickly turn Message Alert tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
Turning Message Alert tone Off when you’re away from your phone.
1) When all new messages are played back using the remote playback feature (see
page 53) the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.
THE INTEGRATED ANSWERING DEVICE [ 45 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Language
The answering system voice announcements can be heard in English, French or
Spanish. To choose the language of the answering system voice announcements:
1) Press MENU/CLOCK six times in standby mode.
You hear the announcement “Language, English” followed by the guidance for
setting the language. The current setting ([ ], [ ] or [ ]) appears on the
base.
2) Press volume/SELECT/
or volume/SELECT/
to select the desired language.
3) Press SET. A confirmation tone is heard along with the setting in the language
selected.
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
▼Preset message
• You can record a
greeting more than 2
seconds up to 30
seconds long.
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
See "Selecting the Message Record Time", page 44 on how to set the announce only feature.
• Position yourself as
near to the base as
possible and speak
clearly when recording
your outgoing message.
▼Recording a personal outgoing message (Greeting)
1) Press and hold greeting in standby mode.
You will hear the announcement “Record greeting” and a confirmation tone.
[
] flashes on the message counter.
[ 46 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
2) Start recording your message. You have 30 seconds, and the message counter
starts to count down [ ] to [ ] every second.
3) When you are finished recording your greeting, press greeting, the
key or
SET. You will hear a confirmation tone, and then your greeting plays back for you.
▼Choosing between the two outgoing messages
Press greeting in standby mode. Then press greeting again when the outgoing
message is played. This switches between the prerecorded greeting and the personal
greeting. After finishing playing back the message, a confirmation tone is heard.
To delete the personal Greeting, press the
announces “Greeting has been deleted”.
key during the announcement and the system
Setting the Base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other
two are volume levels.
1) Press ringer.
You hear the ringer at the current volume level
charge
in use
([
] High, [
] Low, [
] off) (if you set the
When you have set the
base ringer to off and
the handset is on the
base, you will still hear
the ringer from the
handset.
base ringer volume to off, “Ringer off” is
announced) and it is displayed on the base.
memo
rec
volume SELECT
2) Press ringer repeatedly until the desired ringer option
appears.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
3) The system displays the new ringer volume.
THE INTEGRATED ANSWERING DEVICE [ 47 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Temporarily Mute the Base Ringer
Press the
key to temporarily mute the incoming ring. The ringer will sound with
the next incoming call.
Adjusting the Speaker Volume Level
When you press
You can adjust the volume of the base speaker by pressing volume/SELECT/
or
volume/SELECT/
or volume/SELECT/
0, an error tone sounds.
at 9
at
volume/SELECT/
volume/SELECT/
on the base. Press volume/SELECT/
for louder or
for softer while the base speaker is being used except for menu
mode. The numbers [ ]- [ ] are displayed on the base indicating the volume
levels. [ ] being the softest and [ ] being the loudest.
Using Your Answering System
The message counter displays the number of messages stored in memory. If the
display flashes, then there are new messages waiting for you. The flashing
number represents the number of new messages, not total messages. The cordless
phone is designed to play your new messages first. After you play all your new
messages, you can then play your old messages.
When the answering system is full, [
] is displayed on the base, and the system announces "No
remaining time". You should delete some messages so that the system can record new messages.
(Refer to "Deleting a Message" on page 51.)
[ 48 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Playing your messages
1) Press the
key in standby mode.
The system announces the number of new and old
messages. The LED displays the number of new
messages, and the number flashes. The day and time
that each message was received is announced after the
message is played. The message counter displays the
number of current messages stored.
charge
in use
To stop playing your
messages, press the
key again at any time.
memo
rec
volume SELECT
When all new messages have been played, you hear a
confirmation tone and an announcement “End of
messages”. The system returns to standby.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
mic
2) After you have reviewed your new messages, you can
play your old messages by again pressing the
key.
Once you have listened to a new message, it becomes
an old message. The old messages will be played in the
order in which they were received.
Repeating a message
1) Press the
announced.
key to review your messages. The number of stored messages are
2) After a message has played for a few seconds, press the
key to replay the
message. If you have several messages, press the
return to the message you want to replay.
key repeatedly until you
THE INTEGRATED ANSWERING DEVICE [ 49 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press the
key at any time to stop reviewing messages and return to standby.
The message counter shows the number of messages stored in memory.
To quickly scroll backward through a message, press and hold the
key.
Skipping a message
1) Press the
announced.
key to review your messages. The number of messages is
2) Press the
key at anytime to skip to the next message.
Each time the
key is pressed, the system scans forward one message. If you
have several messages, press the
to play.
key repeatedly to find the message you want
3) Press the
key at any time to stop reviewing your messages and return to
standby. The message counter shows the number of messages stored in memory.
To quickly scroll forward through a message, press and hold the
key.
[ 50 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Deleting a Message
To maintain maximum record time, delete the old
messages.
1) Press the
key to review your messages.
charge
in use
2) Press the
to delete.
key anytime during the message
When you press the
key, you are permanently
deleting the message.
Once deleted, the message
cannot be replayed.
memo
rec
volume SELECT
3) You hear a confirmation tone and the message
is deleted.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
You can also delete all the messages.
1) Press the
key in standby mode.
mic
You hear an announcement “To delete all messages,
press delete again”.
2) Press the
key again.
You hear a confirmation tone and [ ] is displayed
on the base. All the messages are deleted.
When you try to delete all messages without first listening to your new messages, you
hear several short beeps followed by an announcement “Please playback all messages”.
This protects you from accidentally erasing messages you have not yet reviewed.
THE INTEGRATED ANSWERING DEVICE [ 51 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice memo
The voice memo function allows you to record messages
(more than 2 seconds up to 4 minutes).
charge
in use
1) Press and hold memo rec in standby mode.
You hear an announcement “Record memo message” and
• The voice memo
function is completely
independent of the
greeting message.
• The voice memo
messages are recorded
as incoming messages.
memo
rec
a tone. [
] flashes on the message counter.
volume SELECT
2) Start your recording.
3) When you have finished, press the
key, memo rec
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
or SET to stop recording. You hear a confirmation tone
and the system returns to standby.
• When the answering
mic
system is full, [
appears on the
]
message counter and
recording is
Recording a conversation
You can record up to 10 minutes of conversation while you are using your phone.
Any conversation that lasts less than 2 seconds will not be recorded.
terminated.
• A recorded
conversation is treated
as a typical message
and will be added to
the stored messages.
1) During a conversation from the handset, press and hold memo rec.
The unit begins recording with a confirmation tone and [
] flashes on the
message counter.
• When recording a
conversation, all
dialing features except
for flash operation
(see page 21) are
disabled.
Stop recording if you
need to enable any
other handset keys.
A beep that can be heard by both parties sounds during recording.
If you receive a call waiting tone while recording a conversation, press talk/flash to accept the
waiting call. The recording feature continues recording the new call. The original call is put on hold.
2) To stop recording, press the
You hear a confirmation tone.
key or memo rec.
[ 52 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Remote access away from home
You can operate your answering system from a remote location using any touch-tone
telephone. Use this function to check for recorded messages, to play or delete
messages, even to record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code.
For your convenience
remote operation cards
are provided for you to
use while away from
home (located backward
of this manual).
(See "Setting a Personal Security Code (PIN)", page 42).
3) The answering system announces the current time and the number of messages
stored in memory. Then you hear "To play incoming messages, press zero two.
For help, press one zero".
4) You may continue to listen to the Help Guidance, or you may select a command
from the following chart:
Command
0 then 1
0 then 2
0 then 3
0 then 4
0 then 5
0 then 6
0 then 7
0 then 8
0 then 9
1 then 0
Function
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answer System Off
You must enter a
command within 15
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
Help Guidance
THE INTEGRATED ANSWERING DEVICE [ 53 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop
the recording, enter the command again.
5) After all of the Help Guidance prompts have played, you hear intermittent beeps
indicating that the system is in the command waiting mode. You may enter
another command at this time from the chart.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely
from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear a beep.
3) Press 0 and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming messages,
press zero two. For help, press one zero".
4) Press 0 then 6 to turn the answering system On. You hear the outgoing message
and a confirmation tone.
5) Hang up the phone and subsequent calls will be answered by the system.
[ 54 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. The first time you charge
your handset, the security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
• To protect you against
misbilled calls which
might result from your
phone being activated
by other equipment,
the cordless phone
provides AutoSecureTM
to electronically locks
your phone when the
handset is in the
1) Remove the handset from the base unit. Press and hold find hs on the base.
2) While holding find hs, place the handset in the base unit, and leave the handset
on the base for more than 3 seconds. A new random security code is set.
Installing the Beltclip
base. Also, the
To attach the beltclip
Random CodeTM digital
security which
automatically selects
one of over 262,000
digital security codes
for the handset and
base.
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
Headset Installation
• If the handset battery
pack is completely
discharged or the
Your phone may be used with an optional headset, the Uniden HS910.
To use this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
battery pack is
removed, the digital
security code will be
lost. If this happens,
a new security code is
set automatically the
next time the battery
pack is charged.
(Headset may be purchased by calling the Uniden Parts Department or
visiting the web site, see QUICK REFERENCE GUIDE on page 3.)
ADDITIONAL INFORMATION [ 55 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the
Uniden Parts Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the
Uniden battery model and Uniden adapter model specifically designated for this product.
Caution
Power Failure
• Use only the specified Uniden battery pack.
During the period that the power is off, you will not be able
to make or receive calls with the telephone.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Maintenance
To maintain a good charge, it is important to clean the charging contacts on
both the handset and base unit once a month. Using water only, dampen a cloth
to clean the charging contacts. Then, make sure to go back over the charging
contacts with a dry cloth.
Caution
Do not use paint thinner,
benzene, alcohol, or other
chemical products. Doing
so may discolor the sur-
face of the telephone and
damage the finish.
[ 56 ] ADDITIONAL INFORMATION
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The charge/in use LED won't
illuminate when the handset
is placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
The audio sounds weak and/or • Move the handset and/or base to a different location away from metal objects or
scratchy.
appliances and try again.
• Press delete/channel to help eliminate background noise.
• Make sure that you are not too far from the base.
Can't make or receive calls.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (see page 55).
• Make sure that you are not too far from the base.
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (see page 55).
• Check the battery pack to insure there is a secure connection.
• Make sure ringer volume isn’t set to turned off.
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights, electrical appliances, other cordless telephones and other devices that use
electricity.
• Move to another location or turn off the source of interference.
ADDITIONAL INFORMATION [ 57 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
The Caller ID does not display. • The handset was picked up before the second ring. The Caller ID is displayed
between the first and second ring.
• The call was placed through a switchboard.
•
Call your local telephone company to verify your Caller ID service is current.
• Charge the handset.
The answering system does not • Make sure the the AC adapter is plugged into the base and wall outlet.
work.
• Make sure the answering system is turned on.
The answering system does not • Set the record time to either the one minute or four minute option.
record any messages.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
After a power failure, the
outgoing message is deleted.
• Record your personal outgoing message again. The default message should remain.
No sound on the base unit
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the base unit.
Cannot access remote call-in
features from another touch-
tone phone.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least
two seconds. If it cannot, you may have to use another phone to access your mes-
sages.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
[ 58 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the
following steps.
Action
Case
Wipe off the liquid, and use as normal.
If the handset or base is exposed to
moisture or liquid, but liquid only
affects the exterior plastic housing.
Handset:
If moisture or liquid has entered the
plastic-housing (i.e. liquid can be
heard in the phone or liquid has
entered the handset battery
compartment or vent openings on the
base).
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once the phone is completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handset’s battery pack for 20 hours in the base unit before using the phone.
Base:
1. Disconnect the AC adapter from the base unit, cutting off electrical power.
2. Disconnect the telephone cord from the base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
ADDITIONAL INFORMATION [ 59 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10° to 50°C (+14°F to +122°F)
AC Adapter Information
AC Adapter part number:
Input Voltage:
AD-314
120V AC 60Hz
9V DC 350 mA
Output Voltage:
Battery Information
Battery part number:
Capacity:
BT-800
800 mAH, 3.6V
You can also use BT-905, but its usage time is less than BT-800.
Frequency
925.181-927.451 MHz
5739.320-5746.130 MHz
• To avoid damage to the phone use only Uniden AD-314 and BT-800 (or BT-905 having less usage time) with your phone.
• If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handset
is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call.
When the operating time becomes short, even after the battery is recharged, please replace the battery.
With normal usage, the battery should last about one year.
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting
the Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday
Specifications, features, and availability of optional accessories are all subject to change without prior
notice.
[ 60 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
F. If the product exhibits a distinct change in performance.
13.Do not use the telephone to report a gas leak in the vicinity of the
leak.
Precautions!
Before you read anything else, please observe the following:
Important Safety Instructions
Warning!
Additional Battery Safety Precautions
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage
to the unit, DO NOT expose this unit to rain or moisture.
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
1. Use only the Uniden battery pack specified in the owner’s manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the nickel-cadmium battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and keys.
The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the owner’s manual provided for this product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
1. Read and understand all instructions.
Rechargeable Nickel-Cadmium Battery Warning
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry
cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in this
equipment in any charger other than the one designed to charge
this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
•
•
•
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result
in the risk of fire or electrical shock.
10.Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12.Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
SAVE THESE INSTRUCTIONS!
•
•
•
Uniden voluntarily participates in an RBRC®
Important Electrical Considerations
industry program to collect and recycle nickel-cadmium batteries at
the end of their useful life, when taken out of service within the
United States.
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. Your telephone compiles with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the REN to your
telephone company. Both numbers are on the base unit.
Through the RBRC® program, Uniden makes it easy for you to drop
off the used battery at local retailers of replacement nickel-cadmium
batteries. You may also contact your local recycling center for
information on where to return the used battery. Please call 1-800-
8-BATTERY for information on Ni-Cd battery recycling in your area.
Uniden's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
NOTE:
You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems
Range
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set
forth by the FCC. We have rated this phone to operate at a maximum
distance with the qualification that the range depends upon the
environment in which the telephone is used. Many factors limit range,
and it would be impossible to include all the variables in our rating.
The Maximum Range rating of this phone is meant to be used as a
means of comparison against other range claims.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)
Uniden works to reduce lead content in our PVC coated cords in our
product and accessories.
Warning!
E. If the product has been dropped or the cabinet has been
damaged.
The cords on this products and/or accessories contain lead, a chemical
ADDITIONAL INFORMATION [ 61 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
important guidelines you should consider:
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A) damaged or not
maintained as reasonable or necessary, (B) modified, altered, or used as
part of any conversion kits, subassemblies, or any configurations not
sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as
detailed by the owner’s manual for this product.
Telephone Line Problems
•
The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which does
not have a switch to interrupt its power.)
Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the telephone
line. Also, the telephone company may make changes in facilities and
services which may affect the operation of your unit. However, your
telephone company must give adequate notice in writing prior to such
actions to allow you time for making necessary arrangements to
continue uninterrupted service.
•
•
•
Be sure there is sufficient space to fully extend the base antenna.
The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem.
If you determine that it is the cause, you must leave it disconnected
until the trouble has been corrected.
•
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
Telephone Line Outlets
There are two types of phone outlets:
Radio Interference
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.
If these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem.
In addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that antenna on the unit is fully extended.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type
of jack. If you do not have modular phone jacks, contact your local
telephone company for information about their installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation
is not difficult; however, you should contact your Uniden telephone
dealer or a telephone supply store for advice about the proper adapter
or converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
Caution!
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs.
To minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR.
If interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to return
it. The Product should be shipped freight prepaid, by traceable means,
to warrantor at:
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base
More Than One Cordless Telephone
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a desk or table, wrap the power cord around the
strain relief notch on the back of the base.
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to select
a channel that provides the clearest communication.
Cordless Telephone Privacy
Uniden America Corporation
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a
fire or other electrical hazards.
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by means
of radio waves which are broadcast over the open airways. Because of
the inherent physical properties of radio waves, your communications
can be received by radio receiving devices other than your own cordless
telephone unit. Consequently, any communications using your cordless
telephone may not be private.
Parts and Service Division
4700 Amon Carter Blvd. Fort Worth, TX 76155
(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through Friday
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
Installation Considerations
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free from defects in materials
and craftsmanship with only the limitations or exclusions set out below.
Selecting a Location
Before choosing a location for your new phone, there are some
[ 62 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment
itself. The REN assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device. “Privacy of communications may not be ensured when using this telephone”.
ADDITIONAL INFORMATION [ 63 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
AC adapter information ................60
Announce only feature ................44
Answering system
Deleting a message ..................51
Playing a message....................49
Recording a conversation ..........52
Remote access ........................53
Repeating a message ................49
Skipping a message ..................50
Turning on/off ........................39
A
Cleaning contacts ......................11
Clock........................................41
Connect the base unit..................12
Controls and functions ..................6
Package contents..........................3
Page ........................................21
Personal security code (PIN code) ..42
Precautions................................61
Quick reference guide ....................3
D
Dialing mode..............................16
Digital security code ..................55
R
Receiving a call..........................18
Recording time ..........................44
Redial ......................................20
Remote access............................53
Ringer volume
E, F, G, H, I, J, K, L
Earpiece volume..........................19
Flash ........................................21
General information ....................60
Greeting....................................46
Headset installation ....................55
I.C. Notice ................................63
Interference ..............................21
Liquid damage............................59
B
Base......................................47
Handset ................................19
Ring time ..................................43
RocketDial ................................30
Base location ..............................8
Battery pack
Information ............................60
Installing ................................9
Preparing and charging ..............9
Replacement and handling ........56
Beltclip installation ....................55
S
Setting menu options ..................15
Setting up the phone ....................8
Storing phone number..................22
M, N, O, P, Q
Maintenance ..............................56
Making a call ............................18
Memory dialing
C
T, U
Caller ID
Editing a stored name and
Tone dialing switch-over ..............20
Traveling out-of-range ................20
Troubleshooting..........................57
Caller ID service ......................32
Call Waiting ............................21
Deleting ................................34
Setting Caller ID options ..........15
Using ....................................36
Viewing..................................33
Call Waiting ..............................21
Chain dialing ............................26
Channel ....................................21
Charging the battery pack ............12
phone number ......................27
Erasing a stored name and
phone number ......................29
Making calls with memory
V, W, X, Y, Z
Voice memo ..............................52
Volume control
dialing ..............................25
Storing phone numbers and
Base......................................48
Handset ................................19
Wall mounting ............................13
Warranty ..................................62
names ................................22
Menu mode ................................40
Message alert ............................45
Outgoing message ......................46
[ 64 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from home
Turn on the answering system remotely
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a 1. Call your phone and let it ring
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone.
10 times until it answers.
2. Press 0 and enter your PIN
code.
touch-tone phone.
10 times until it answers.
2. Press 0 and enter your PIN
code.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
3. Press 0 then 5 to stop
the announcement.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from home
Turn on the answering system remotely
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a 1. Call your phone and let it ring
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone.
10 times until it answers.
2. Press 0 and enter your PIN
code.
touch-tone phone.
10 times until it answers.
2. Press 0 and enter your PIN
code.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
3. Press 0 then 5 to stop
the announcement.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
U
T
C
U
T
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Key
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Key
0
1
2
3
4
5
6
7
8
9
0
0
1
2
3
4
5
6
7
8
9
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
1
Help Guidance
Help Guidance
C
U
T
C
U
T
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Key
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Key
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Help Guidance
Help Guidance
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we´ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023
or visit our web site at www.uniden.com
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Accessibility
?
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|