Uniden Cordless Telephone EXAI 4248 User Manual

EXAI 4248  
SERIES  
OWNER'S  
MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Welcome/Features  
2
3
4
5
20  
20  
23  
24  
Storing Names and Numbers in Speed Dial Memory  
Storing Caller ID Messages in Speed Dial Memory  
Making Calls from Speed Dial Memory  
Controls and Functions  
Terms Used in this Manual  
Accessibility  
Caller ID and CIDCW (Caller ID on Call  
Waiting)  
Installing the Phone  
6
25  
26  
27  
28  
28  
A. Choose the Best Location  
6
Viewing the Caller ID Message List  
Deleting Information from the Caller ID List  
Making a Call from the Caller ID List  
Caller ID on Call Waiting (CIDCW)  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the Base Unit on a Wall  
Installing the Beltclip  
7
8
9
10  
11  
The Integrated Answering Device  
29  
Headset Installation  
Setting Up Your Answering System  
30  
Basic Setup  
12  
12  
12  
13  
14  
14  
15  
16  
16  
17  
17  
18  
18  
18  
19  
19  
Turning the Answering System On/Off  
39  
Activating AutoTalk  
Using Your Answering System  
40  
45  
46  
49  
50  
52  
Activating Caller ID on Call Waiting  
Entering Your Area Code  
Choosing the Dialing Mode  
Setting the Language  
Handset Operation  
Remote Operation  
Changing the Digital Security Code  
Note on Power Sources  
General Information  
Selecting the Ring Tone and Volume  
Using Your Phone  
Making and Receiving Calls  
Redialing the Last Dialed Number  
Adjusting the Earpiece Volume  
Tone Dialing Switch-over  
Traveling Out-of-Range  
Selecting a Different Channel  
Find Handset  
Troubleshooting  
53  
Liquid Damage  
56  
Precautions & Warranty  
I.C. Notice  
Index  
57  
59  
60  
Using Call Waiting  
Remote Operation Card  
w w w . u n i d e n . c o m  
[ 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase of the Uniden cordless telephone and answering system. This  
phone is designed and engineered to exacting standards for reliability, long life, and outstanding  
performance.  
Welcome  
Features  
Note:Illustrations in this manual are used for explanation purposes. Some  
illustrations in this manual may differ from the actual unit. The color of your  
cordless phone may vary.  
• 2.4GHz Extended Range Technology  
• Integrated Answering Device  
• Caller ID/Caller ID on Call Waiting  
• 3-Line Backlit LCD  
• Last Number Redial  
• Tone/Pulse Dialing  
• Page/Find Handset Key  
• Earpiece/Ringer Volume Controls  
• Mute or Turn Ringer Off  
• Hearing Aid Compatible  
• 20 Channel Auto Scan  
• Desk or Wall Mountable  
• Access Messages with Handset Remote Key  
• Trilingual Menu Displays/Voice Prompts  
• 30 Caller ID Memory  
• 10 Number Memory Dialing  
If you have any trouble with your phone, call our Customer Hotline at 1-800-297-1023, Mon-Fri  
7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)  
For more information on Uniden products and accessories, be sure to visit our web site:  
Uniden® is a registered trademark of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden  
America Corporation.  
w w w . u n i d e n . c o m  
[ 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Controls and Functions  
1. Handset antenna  
2. Jack for optional headset  
3. Beltclip hole  
1
4. Ringer speaker  
2
3
6
7
5. Handset battery compartment  
6. Handset earpiece  
7. LCD display  
8
8.  
/
/vol/  
(earpiece volume, ringer  
4
13  
14  
15  
volume and scroll) key (pages 12, 15 and  
17)  
9
9. Call id/menu key (pages 12 and 25)  
10. /tone/ key (left cursor)  
(pages 18 and 20)  
11. Redial/pause key (pages 17 and 22)  
12. Select/remote key (pages 12 and 45)  
13. End key (pages 16 and 17)  
14. Talk/flash key (pages 16 and 19)  
15. Memory key (page 20)  
16. #/  
*
5
16  
17  
10  
11  
12  
18  
19  
Retrieve TAD message  
with Handset Remote keys  
Play  
(right cursor) key (page 20)  
17. Delete/chan key (pages 18, 20 and 27)  
18. Handset microphone  
19. Handset charging contacts  
Repeat  
Skip  
Delete  
Stop  
w w w . u n i d e n . c o m  
[ 3 ] C O N T R O L S & F U N C T I O N S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
20. DC IN 9V jack  
21. Base antenna  
22. Telephone line jack  
23. Base speaker  
24.  
25.  
(play/stop) key (pages 38 and 40)  
(repeat/rewind) key (page 41)  
20  
21  
22  
26. Base charging contacts  
27. Menu/clock key (pages 30 and 31)  
28. Mic (microphone)  
29. Ringer key (page 38)  
30. Memo rec (record) key (page 44)  
31. Greeting key (page 37)  
32. Charge/in use LED  
23  
32  
33  
34  
35  
36  
37  
24  
25  
26  
27  
33.  
34.  
35.  
(delete) key (page 43)  
(skip/fast forward) key (page 41)  
(answer on/off) key (page 39)  
36. Set key (page 30)  
37. /volume/select keys (pages 30 and 38)  
38. Find hs (handset) key (pages 19 and 49)  
38  
/
28 29 30 31  
Terms Used in this Manual  
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has  
not been pressed and there is no dial tone.  
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.  
• CID - Caller ID  
• CIDCW - Caller ID on Call Waiting  
w w w . u n i d e n . c o m  
T E R M S U S E D I N T H I S M A N U A L [ 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Accessibility  
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer  
service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities,  
please call the accessibility voice/TTY line:  
1-800-874-9314  
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we  
w w w . u n i d e n . c o m  
[ 5 ] A C C E S S I B I L I T Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the Phone  
Do the following steps:  
note  
A. Choose the Best Location  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the Base Unit on a Wall  
If your home has  
specially wired alarm  
equipment connected to  
the telephone line, be  
sure that installing the  
system does not disable  
your alarm equipment.  
A. Choose the Best Location  
When choosing a location for your new phone, here are some important guidelines you should consider:  
Avoid heat sources, such as radiators,  
air ducts, and sunlight  
Avoid noise sources such as a window by  
a street with heavy traffic  
Avoid television sets and other  
electronic equipment  
Avoid microwave ovens  
If you have questions  
about what will disable  
your alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
Avoid excessive moisture,  
extremely low temperatures, dust,  
mechanical vibration, or shock  
Choose a central location  
Avoid personal computers  
Avoid other cordless telephones  
• The location should be close to both a phone jack and a continuous power outlet (one  
which is not connected to a switch).  
• The base and handset should be kept away from sources of electrical noise such as motors,  
microwave ovens, and fluorescent lighting.  
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For  
better reception, place the base as high as possible.  
• The base should be placed in an open area for optimum range and reception.  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
B. Install the Rechargeable Battery Pack into  
the Handset  
The handset is powered by a rechargeable battery pack. The  
battery recharges automatically when the handset is placed in  
the base unit.  
!
Use only the Uniden  
(BT-905 or BT-1006)  
rechargeable battery  
pack supplied with  
your cordless  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
telephone.  
2) Plug the battery pack connector (red & black wires) into the  
jack inside the battery compartment.  
(The connector notches fit into the grooves of the jack only  
one way.) Match the wire colors to the polarity label in the  
battery compartment, connect the battery and listen for a  
click to insure connection.  
3) Make sure you have a good connection by slightly pulling on  
the battery wires. If the connection is secure, the battery  
jack will remain in place.  
4) Place the battery case cover back in the handset by sliding  
it upwards until it clicks into place.  
[ 7 ] I N S T A L L I N G T H E P H O N E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
C. Connect the Base Unit and Charge the Handset  
1) Connect the AC adapter to the DC IN 9V jack and to a  
standard 120V AC wall outlet.  
!
2) Place the handset in the base unit with the keypad  
facing forward.  
Use only the supplied  
AD-314 AC adapter.  
Do not use any other  
AC adapter.  
3) Make sure the charge/in use LED illuminates.  
If the LED does not illuminate, check to see that the  
AC adapter is plugged in and the handset makes good  
contact with the base charging contacts.  
•Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed  
and create a fire or  
electrical hazard.  
• Connect the AC adapter to a continuous power supply.  
• Place the base unit close to the AC outlet to avoid long extension  
cords.  
4) Charge your handset at least 15-20 hours before  
plugging the phone line.  
5) Once the handset battery pack is fully  
charged, connect the telephone line cord to  
the TEL LINE jack and a telephone outlet.  
If your telephone outlet isn't modular,  
contact your telephone company for  
assistance.  
Modular  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D. Mount the Base Unit on a Wall  
Standard wall plate mounting  
This phone can be mounted on any standard wall plate.  
1) Plug the AC adapter to the DC IN 9V  
jack.  
2) Route the AC adapter cord through  
the molded wiring channel as shown.  
6
3) Plug the AC adapter into a standard  
120V AC wall outlet.  
5
1
4) Plug the telephone line cord into the  
TEL LINE jack. Route the cord  
through the molded wiring channel  
as shown.  
6
2
5) Plug the telephone line cord into the  
telephone outlet.  
6) Align the mounting slots on the base  
with the mounting posts on the wall.  
Then push in and down until the  
phone is firmly seated.  
3
4
[ 9 ] I N S T A L L I N G T H E P H O N E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
• Avoid electrical cables, pipes, or other items behind the mounting  
location that could cause a hazard when inserting screws into the  
wall.  
• Try to mount your phone within 5 feet of a working phone jack to  
avoid excessive cord lengths.  
• Make sure the wall material is capable of supporting the weight of  
the base and handset.  
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring  
devices suitable for the wall material where the base unit will be  
placed.  
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-  
15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for  
mounting the phone.  
2) Refer to step 1 through 6 on page 9 to mount the telephone.  
Installing the Beltclip  
To attach the beltclip  
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.  
To remove the beltclip  
Pull both sides of the beltclip to release the tabs from the holes.  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 1 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Headset Installation  
Your phone may be used with an optional headset. To use this feature,  
insert the headset plug into the headset jack.  
Your phone is ready for hands-free conversations.  
by calling our Parts Department. See back cover page).  
[ 1 1 ] I N S T A L L I N G T H E P H O N E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Basic Setup  
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call  
Waiting), Area Code, Dial Mode and Language.  
Activating AutoTalk  
AutoTalk allows you to answer the phone simply by removing the handset from the base. You  
do not have to press any keys.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the select/remote key to turn AutoTalk on.  
3) Press the end key to complete the setting. The handset returns to standby mode.  
Activating Caller ID on Call Waiting  
Caller ID allows you to see the name and number of the calling party before you answer the  
phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that  
comes in when you are on the line.  
You must subscribe to Caller ID service through your local telephone provider to use this  
feature.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
w w w . u n i d e n . c o m  
B A S I C S E T U P [ 1 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
2) Press the /vol/ key to select CIDCW.  
3) Press the select/remote key to toggle and turn on Caller ID on Call  
Waiting.  
4) Press the end key and return the handset to the base unit to complete the setting. The  
handset returns to standby mode.  
Entering Your Area Code  
If you can make a call by dialing only 7 digits (instead of 10), you can program your local  
area code in your phone. If you get a call from within your area code, you'll only see the 7-  
digit phone number. If you get a call from outside your area code, you'll see all 10 digits.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/ key twice to select Area Code.  
3) Press the select/remote key. If an area code was already stored,  
the phone will display it.  
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you  
make an error, use the delete/chan key to backspace.  
5) Press the select/remote key. A confirmation tone sounds.  
6) Press the end key to complete the setting. The handset returns to standby mode.  
[ 1 3 ] B A S I C S E T U P  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Choosing the Dialing Mode  
Your phone can communicate with the telephone network in two different ways: tone dialing  
and pulse dialing. These days, most phone networks use a method called tone dialing, so  
your phone comes programmed for tone dialing.  
note  
If your phone company uses pulse dialing, you'll need to change your phone's dial mode.  
There's an easy way to tell: try making a call. If your call connects, your phone's setting is  
fine. If not, follow the steps below:  
If your phone system  
requires pulse dialing  
and you need to send  
DTMF tones during a  
call, you can  
temporarily switch over  
to tone dialing. (Refer  
to “Tone Dialing Switch-  
over” on page 18.)  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/  
key three times to select Dial.  
3) Press the select/remote key to set the phone to pulse dialing.  
4) Press the end key to complete the setting. The handset returns to  
standby mode.  
Setting the Language  
You can change the language the menu display uses. Choose from English, French, or  
Spanish.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/  
key four times to select Language.  
w w w . u n i d e n . c o m  
B A S I C S E T U P [ 1 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3) Press the select/remote key to select Eng, Fr. or Esp.  
4) Press the end key to complete the setting. The handset returns to  
standby mode.  
Selecting the Ring Tone and Volume  
Your phone has five different ringer tone/volume combinations you can choose from.  
1) With the phone in standby mode, press the  
/vol/ or  
/vol/ key.  
2) The phone will sound the different ring tones at different volumes. To turn the ringer off,  
select Ringer Off.  
3) When the phone sounds the ring tone and volume you wish to use, press the end key.  
[ 1 5 ] B A S I C S E T U P  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Your Phone  
note  
Making and Receiving Calls  
Making a call  
1) Remove the handset from the base.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Dial the number.  
OR  
1) Remove the handset from the base.  
2) Dial the number.  
3) Press the talk/flash key.  
Receiving a call  
1) Remove the handset from the base. (If AutoTalk is on, the phone will automatically  
To turn on the AutoTalk  
feature, see “Activating  
AutoTalk” on page 12.  
answer the call when you pick it up.)  
2) Press the talk/flash key.  
OR  
1) If the handset is off the base, press the talk/flash key, the /tone/  
key, the #/  
key  
*
or any number key. (AutoTalk is on.)  
Hanging up  
Press the end key or return the handset to the base.  
w w w . u n i d e n . c o m  
U S I N G Y O U R P H O N E [ 1 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Redialing the Last Dialed Number  
1) Remove the handset from the base.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Press the redial/pause key.  
OR  
note  
1) Remove the handset from the base.  
2) Press the redial/pause key.  
3) Press the talk/flash key.  
Adjusting the Earpiece Volume  
To change the earpiece volume, press the /vol/  
or  
/vol/ key during a call.  
You can only mute the  
handset ringer if the  
handset is off the base  
when the phone starts  
ringing.  
Temporarily Mute Ringer  
If the handset is off the base while an incoming call is  
ringing, simply press the end key to mute the incoming  
ring. The ringer will sound with the next incoming call.  
[ 1 7 ] U S I N G Y O U R P H O N E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
       
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can  
switch over to tone dialing after the call connects. This  
feature is useful when you need tone dialing to use any  
automated menu systems, such as telephone bank tellers,  
telephone prescription refills, customer support menus,  
etc.  
note  
If your phone is set to pulse dialing mode, make your call  
normally. Once your call connects, press the /tone/  
*
key. Any digits you enter from then on will be sent as  
tone digits. When this particular call ends, the phone  
automatically returns to pulse dialing mode.  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit, noise  
increases. If you pass the range limits of the base, your call will terminate within one  
minute.  
The UltraClear PlusTM  
true compander circuitry  
virtually eliminates  
background noise. This  
innovative technology,  
together with 20  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone´s  
channel for clear operation. While using your phone, press the delete/chan key. Scanning  
appears on the display, indicating the phone is changing to another channel. For more  
information on interference, refer to "Radio Interference" on page 58.  
different channels,  
provides you with the  
best possible reception  
during all your  
conversations.  
w w w . u n i d e n . c o m  
U S I N G Y O U R P H O N E [ 1 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Find Handset  
To locate the handset, press the find hs key on the base.  
The handset beeps for 60 seconds.  
To cancel paging, press any key on the handset or the  
find hs key on the base, or return the handset to the  
base.  
Paging is also canceled when the phone receives an  
incoming call.  
Using Call Waiting  
If you have Call Waiting, you can receive calls while on the  
line.  
1) If a call comes in while you are on the phone, you will  
hear a call waiting tone. If you have CIDCW activated,  
you will see the name and number of the incoming caller.  
2) Press the talk/flash key to accept the waiting call. After  
a short pause, you will hear the new caller.  
3) To return to the original caller, press the talk/flash key  
again.  
You must subscribe to Call Waiting through your local telephone company.  
[ 1 9 ] U S I N G Y O U R P H O N E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
       
Using the Speed Dial Memory  
The speed dial memory allows you to store up to 10 names and numbers in the handset. You  
can dial these numbers with just a few key presses.  
note  
The speed dial memory is not limited to phone numbers. You can store any number (up to 20  
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.  
For example, you can save your bank account number to speed dial memory. When you call  
your bank's telephone teller service and are prompted to enter your account number, simply  
press the memory key and the speed dial number where you stored your account number.  
Then press the select/remote key.  
When editing the speed  
dial memory, you must  
press a key within 30  
seconds or the phone  
will return to standby  
mode. If you return the  
handset to the base, the  
phone will return to  
standby mode also.  
Storing Names and Numbers in Speed Dial Memory  
1) With the phone in standby mode, press the memory key.  
2) Enter 0-9 to select the speed dial number where you would like to  
store this entry. You can also scroll through the list with the  
/
vol/ and  
/vol/  
keys. Press the select/remote key twice.  
3) Store Name appears and a cursor flashes indicating that the  
phone is ready for the name to be entered.  
If the selected speed dial number is already assigned, the Edit  
screen appears. You can select Edit to edit this entry, select  
Delete to erase this entry, or select Go Back to choose another  
speed dial number.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4) Enter a name according to the instructions below, then press the select/remote key. If no  
name is required, go to step 5.  
• The name can be up to 13 characters.  
note  
• Use the #/  
and /tone/  
keys to move the cursor to the desired location.  
*
• Use the delete/chan key to delete characters as needed.  
• Press and hold the delete/chan key to delete all the characters.  
If the next character  
uses the same number  
key, you must press the  
Refer to the letters on the number keys to select the desired characters.  
With each press of a numeric key, the displayed character appears in the following order:  
upper case letters first, lower case letters next and finally the number corresponding to  
the key.  
#/  
key to move the  
cursor over. Otherwise  
the next time you press  
the number key, it  
If you make a mistake while entering a name  
changes the character  
that was previously set.  
Use the /tone/  
or #/  
key to move the cursor to the incorrect character.  
*
Press the delete/chan key to erase the wrong character. Then enter the correct character.  
To delete all characters, press and hold the delete/chan key.  
Number of times key is pressed  
For example, to enter Movies.  
keys  
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/  
move the cursor to the right.  
2) Press 6 six times.  
key to  
1
2abc  
3def  
3) Press 8 six times.  
4ghi  
5jkl  
4) Press 4 six times.  
6mno  
5) Press 3 five times.  
6) Press 7 eight times.  
7pqrs  
8tuv  
9wxyz  
0oper  
[ 2 1 ] U S I N G T H E S P E E D D I A L M E M O R Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
5) Store Numberis displayed. The cursor flashes indicating that the  
phone is ready for the number to be entered.  
6) Use the keypad to enter the phone number; each number can be  
up to 20 digits.  
If you need the phone to pause during the dialing sequence, press  
the redial/pause key to insert a two-second delay between the  
numbers. You can enter multiple pauses to increase the delay.  
Each pause counts as a digit. The display shows a  
pause.  
P
for every  
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more  
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.  
7) Press the memory key. You will hear a confirmation tone, and the  
following screen appears.  
Memory storage is complete.  
After about 2 seconds, the following screen displays all the speed  
dial memory entries.  
8) Press the end key to exit memory setup mode. The phone returns  
to standby.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Storing Caller ID Messages in Speed Dial Memory  
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory  
dialing. For instructions on viewing the Caller ID Message list, see page 26.  
note  
1) Press the call id/menu key. Select the phone number to be stored  
You cannot store a  
Caller ID message if no  
phone number appears  
in the message.  
from the Caller ID list by pressing the /vol/ or  
/vol/  
key.  
2) Press the memory key.  
3) Enter a number (0 - 9) or press the /vol/ or  
/vol/  
key to select the memory  
location to be stored.  
4) Press the select/remote key. You hear a confirmation tone, and  
the number is stored in memory. The display returns to the Caller  
ID list.  
If a number has already been stored in the selected memory  
number location, a confirmation screen is displayed.  
Press the  
/vol/  
key to select Yes. Press the select/remote  
key to overwrite. The display returns to the Caller ID list.  
[ 2 3 ] U S I N G T H E S P E E D D I A L M E M O R Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Making Calls from Speed Dial Memory  
1) Press the memory key. The handset displays your programmed  
speed dial number.  
2) Enter the number (0 - 9), or press the  
/vol/ or  
/vol/  
key to select the speed dial number you would like to dial.  
3) Press the talk/flash key. Talkand the number selected appear on  
the display. Then the displayed number is dialed.  
To cancel speed dialing  
Press the end key to cancel speed dialing. The handset returns to standby mode.  
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to  
standby mode.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Caller ID and CIDCW (Caller ID on Call Waiting)  
You must subscribe to Caller ID service through your local telephone provider to use  
this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s  
name, phone number, date and time of call. The incoming call information is stored in the  
Caller ID record. If the Caller ID service includes the caller´s name, the caller´s name appears  
on the display (up to 15 letters).  
note  
•If you answer a call  
before the Caller ID  
message is received  
(for example, before  
the second ring), the  
Caller ID message will  
not appear.  
The date and  
time received  
Caller's name  
Caller's phone number  
You may receive any one of the following messages:  
•When the call is  
received via a  
telephone company  
that does not offer  
Caller ID service, the  
caller´s phone number  
and name do not  
When invalid data is received  
Incomplete Data  
When a private name is received  
When a private number is received  
When a unknown name is received  
Private Name  
Private Number  
Unknown Name  
When a unknown number is received Unknown Number  
appear. (This includes  
international calls.)  
Data errors appear as ¨ ¨.  
•When the call is  
received via a private  
branch exchange  
(PBX), the caller´s  
phone number and  
name may not appear.  
[ 2 5 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Viewing the Caller ID Message List  
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You  
can also view the Caller ID list during a call.  
note  
1) Press the call id/menu key. The summary screen displays the  
•In Caller ID operation,  
if no key is pressed for  
more than 30 seconds,  
an error tone sounds  
and the telephone  
returns to standby  
mode.  
number of new messages and total messages.  
2) Use the /vol/  
key to scroll through the messages from the  
latest to the earliest, or use the /vol/ key to scroll through  
the messages from the earliest to the latest.  
•Each message can be  
up to 15 characters for  
the name and 15 digits  
for the phone number.  
3) Press the call id/menu key to return to talk mode, or press the  
end key to return to standby mode.  
•The number of calls  
from the same Caller ID  
appears next to the  
received time. Once  
you view the new  
message, the number  
will be cleared and  
disappear.  
•During a call, don't  
press the end key, or  
the call will be  
disconnected.  
w w w . u n i d e n . c o m  
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 2 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Deleting Information from the Caller ID List  
If the phone receives more Caller ID messages than it can store, the oldest one in the list is  
automatically deleted. Caller ID data can also be deleted manually.  
note  
Deleting a Caller ID Message  
•While using the Delete  
All?or Delete  
1) Press the call id/menu key in standby mode. Find the message to  
be deleted from the Caller ID list by pressing the  
/vol/  
or  
Message? screen, if no  
key is pressed for more  
than 30 seconds, an  
error tone sounds, and  
the handset returns to  
standby mode.  
/vol/ key.  
2) Press the delete/chan key.  
3) Press the /vol/ or  
/vol/  
key to select Yes, and then  
press the select/remote key.  
•If you get an incoming  
call or page, the  
deleting operation is  
canceled, and you can  
answer the call or  
page.  
Deleting all Caller ID names/numbers  
1) With the phone in standby mode, press the call id/menu key.  
2) Press the delete/chan key.  
3) Press the /vol/ or  
/vol/  
key to select Yes, and then  
press the select/remote key.  
You hear a confirmation tone and all stored Caller ID messages are  
deleted.  
[ 2 7 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Making a Call from the Caller ID List  
You can place a call from the Caller ID list.  
note  
1) Press the call id/menu key in standby mode. Select the phone  
number that you want to dial by pressing the  
/vol/  
or  
/
vol/ key.  
You cannot make a call  
from the Caller ID list if  
your cordless phone is  
connected to a private  
branch exchange (PBX).  
2) To have the phone dial a 1 before the displayed Caller ID number, press 1. To have the  
phone dial the stored area code before the displayed Caller ID number, press 3.  
3) Press the talk/flash key. The displayed phone number dials automatically.  
Caller ID on Call Waiting (CIDCW)  
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller ID data  
is displayed. To accept the waiting call, press the talk/flash key (see page 19).  
w w w . u n i d e n . c o m  
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 2 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
The Integrated Answering Device  
The cordless phone has a built-in answering system that answers and records incoming calls.  
You can also use your answering system to record a conversation, leave a voice memo  
message, or to announce a special outgoing message to callers when you're away from your  
phone.  
Features  
• Digital Tapeless Recording  
• Access Messages with Handset Remote  
Key  
• Retrieve Messages Using Handset  
• Up to 13 Minutes of Recording Time  
• Call Screening  
• Personal or Pre-recorded Outgoing  
Message  
• Voice Prompts  
(English, French or Spanish)  
• Time and Day Announcement  
• Remote Message Retrieval  
• Toll Saver  
• Conversation Recording  
• Voice Memo  
• Selectable Ringer Options  
(High, Low or Off)  
Digital Tapeless Recording allows you to quickly review, save, or delete any messages you  
choose. You will never have to worry about a tape wearing out, jamming, or resetting  
improperly.  
The Integrated Answering System is easy to use, but please read through all of the  
instructions carefully.  
[ 2 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Setting Up Your Answering System  
note  
Answering System Settings  
To set the following six functions you must enter the menu mode.  
•For your convenience,  
voice prompts will  
guide you through the  
menu mode.  
• With the phone in standby mode, use the menu/clock  
key to scroll through the menu options. The system  
returns to standby and sounds a tone after the last  
menu option.  
menu/clock  
menu/clock  
menu/clock  
•After the setting, press  
• If any of the following occurs during menu setup, the  
system returns to standby; you will have to start over  
with the procedure you were performing:  
-The talk/flash key is pressed  
the  
(play/stop)  
key to exit the menu  
mode, or the menu/  
clock key to move to  
the next menu option.  
menu/clock  
menu/clock  
menu/clock  
menu/clock  
-The  
(play/stop) key is pressed  
-10 seconds elapse without a key press  
-An incoming call is received  
• If the system remains idle for about five seconds after  
the announcement, the system returns to standby.  
Once the  
or /volume/select key is pressed, the  
idle time is extended to 10 seconds.  
w w w . u n i d e n . c o m  
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting the Time  
The clock on the cordless phone’s answering system starts when power is supplied to the  
base. Follow these steps to set the clock to the correct time.  
note  
1) With the phone in standby mode, press the menu/  
clock key.  
•Normally, the system  
will return to standby  
if it remains idle for 10  
The system announces "Time" followed by the current  
time and the instructions for setting the time.  
seconds after the  
/volume/select  
key is pressed. For  
setting the time,  
or  
2) Press the  
or /volume/select key until the  
correct day is announced. The numbers [ ] through  
[ ] are displayed on the base.  
however, the idle time  
is extended to two  
minutes.  
3) Press the set key to select the day.  
•Press and hold the  
or  
/volume/select  
4) Press the  
the correct hour setting. The numbers [ ] through  
] are displayed on the base.  
or /volume/select key until you hear  
key to quickly scroll  
through the numbers  
on the display.  
[
5) Press the set key to select the hour.  
6) Press the  
or /volume/select key until you hear the correct minute setting.  
The numbers [ ] through [ ] are displayed on the base.  
7) Press the set key to select the minute.  
[ 3 1 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
8) Press the  
or /volume/select key until you hear the correct AM or PM setting.  
The message counter displays [ ] or [ ].  
note  
9) Press the set key to select the AM/PM setting.  
You hear a confirmation tone followed by the announcement "Time," and the day and time  
are then announced for your review. After a few seconds, the system announces “To set  
security code, press menu again.”  
Setting a Personal Security Code (PIN)  
If you want to be able to play your messages from a remote location, you need to enter a  
two-digit Personal Identification Number (PIN) code (01-99). To select a PIN, perform the  
following steps:  
1) With the phone in standby mode, press the menu/clock key twice.  
The system announces "Security code," and the current PIN code is announced as it is  
displayed on the base. Then the system announces the instructions for setting the PIN  
code.  
The PIN code is set to  
"80" at the factory.  
2) Press the  
or /volume/select key until the desired number appears.  
3) Press the set key to select the PIN code. You hear a confirmation tone, then the  
announcement "Security code" followed by the new PIN code. After a few seconds, the  
system announces “To set ring time, press menu again.”  
w w w . u n i d e n . c o m  
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting the Ring Time  
The ring time setting allows you to set the number of rings the caller hears before your  
answering system plays the outgoing message. You can set the ring time to answer after two,  
four, or six rings. If you select Toll Saver [  
], the answering system picks up after two  
rings if you have new messages, and after four rings if there are none. This way, if you make  
a long distance call to check your messages, you can hang up after the second ring to avoid  
billing charges.  
1) With the phone in standby mode, press the menu/clock key three times.  
You hear "Ring time" and the current ring time ([ ], [ ], [ ], [  
] Toll saver), and it  
is displayed on the base. Then you hear the guidance for setting the ring time.  
2) Press the or /volume/select key until the desired ring time appears.  
3) Press the set key to select the new ring time. You hear a confirmation tone, then the  
announcement "Ring time" followed by the new ring time. After a few seconds, the system  
announces "To set record time, press menu again."  
[ 3 3 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Selecting the Message Record Time  
You have three record time options: one minute, four minutes, and "Announce only."  
"Announce only" answers the call with the preset greeting or your personal greeting but  
prevents the caller from leaving a message.  
note  
After setting the  
1) With the phone in standby mode, press the menu/clock key four times.  
Announce only feature,  
you may want to change  
your outgoing message  
not to prompt the caller  
to leave a message.  
However, the  
You hear "Record time" and the current recording time ([ ] one minute, [ ] four  
minutes, [ ] Announce only, No recording), and it is displayed on the base.  
Then you hear the guidance for setting the record time.  
2) Press the  
or /volume/select key until the desired time appears.  
prerecorded message  
changes automatically.  
3) Press the set key to select the new recording time. You hear a confirmation tone, then the  
announcement "Record time" followed by the new recording time. After a few seconds, the  
system announces "To set message alert, press menu again."  
Setting the Message Alert Tone  
The message alert tone beeps every 15 seconds whenever you have unheard messages. The  
tone turns off automatically after you listen to all your new messages. You can also turn off  
the message alert tone by pressing any key on the base.  
Follow the steps below to turn on the message alert tone:  
w w w . u n i d e n . c o m  
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1) With the phone in standby mode, press the menu/clock key five times.  
You hear "Message alert" and the current setting ([ ] Off or [ ] On), and it is  
displayed on the base. Then you hear the instructions for setting the Message Alert Tone.  
2) Press the  
or /volume/select key to make your selection.  
3) Press the set key to select the new setting. You hear a confirmation tone, then the  
announcement "Message alert" followed by the current setting you have selected. After a  
few seconds, the system announces "To set language, press menu again."  
When the first new message is received, the alert tone will begin to sound.  
Selecting the Language  
The answering system voice announcements can be heard in English, French or Spanish.  
To choose the language of the answering system voice announcements:  
1) With the phone in standby mode, press the menu/clock key six times.  
You hear the announcement "Language, English" followed by the voice prompts for setting  
the language. The current setting ([ ], [ ] or [ ]) appears on the base.  
2) Press the  
or /volume/select key to select the desired language.  
3) Press the set key. A confirmation tone is heard along with the setting in the language  
selected.  
[ 3 5 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
Setting Your Outgoing Message (Greeting)  
When you receive a call, the answering system automatically plays either a preset message or  
your own greeting.  
Preset message  
The following message is prerecorded:  
"Hello, no one is available to take your call. Please leave a message after the tone."  
If the answering machine is set to announce only, the preset greeting automatically changes  
to:  
"Hello. No one is available to take your call. Please call again."  
See “Selecting the Message Record Time” on page 34 on how to set the announce only  
feature.  
w w w . u n i d e n . c o m  
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Recording a personal outgoing message (Greeting)  
1) With the phone in standby mode, press and hold the greeting key.  
You hear the announcement "Record greeting" and a confirmation tone.  
note  
[
] flashes on the message counter.  
•Your greeting must be  
more than 2 seconds  
and less than 30  
2) Start recording your message. You have 30 seconds, and the message counter starts to  
count down [ ] to [ ] every second.  
seconds to record.  
3) When you are finished recording your greeting, press the greeting,  
(play/stop) or set  
•Position yourself as  
near to the base’s  
microphone as possible  
and speak clearly when  
recording your  
key. You hear a confirmation tone, and then your greeting plays back for you.  
Choosing between the two outgoing messages  
With the phone in standby mode, press the greeting key to play the current outgoing  
message. While the outgoing message is playing, press the greeting key again to switch  
between the prerecorded greeting and the personal greeting. After the message finishes  
playing, a confirmation tone is heard.  
outgoing message.  
To delete the personal greeting, press the  
(delete) key during the announcement and  
the system announces "Greeting has been deleted."  
[ 3 7 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
 
Setting the Base Ringer Volume  
The base has three ringer volume settings: high, low, and off. You can change the ringer volume  
while in standby mode or while an incoming call is ringing.  
note  
1) Press the ringer key.  
You hear the ringer at the current volume level  
Although you have set  
the base ringer to off,  
the handset will still  
ring.  
([  
] high, [  
] low, [  
] off) (if you set the  
base ringer volume to off, "Ringer off " is  
announced) and it is displayed on the base.  
2) Press the ringer key repeatedly until the desired  
ringer option appears.  
3) The system displays the new ringer volume.  
Temporarily Mute the Base Ringer and Call Screen  
Press the  
(play/stop) key to temporarily mute the incoming ring and call screen. The  
ringer will sound with the next incoming call. To turn the ringer back on for this call, press  
the ringer key. To hear the answering machine and screen this call, press the  
or /volume/select key.  
Adjusting the Speaker Volume Level  
You can adjust the volume of the base speaker by pressing the  
or /volume/select key  
on the base. Press the /volume/select key for louder or the /volume/select key for  
softer while the base speaker is being used except for menu mode. The numbers [ ] -[  
are displayed on the base indicating the volume levels. [ ] being the softest and [ ] being  
the loudest.  
]
w w w . u n i d e n . c o m  
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 3 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Turning the Answering System On/Off  
To turn the answering system on,  
press the (answer on/off) key. The  
system will announce "Answering  
system is on." The current greeting  
message will be played, and you hear  
a confirmation tone. The message  
counter displays the number of  
messages stored in memory. If the  
display flashes, there are new  
messages waiting for you.  
To turn the answering system off,  
press the (answer on/off) key  
again. After the announcement  
“Answering system is off,” the  
message counter display will no  
longer be illuminated.  
[ 3 9 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Using Your Answering System  
The message counter displays the number of messages stored in memory. If the display  
flashes, new messages are waiting for you. The flashing number represents the number of new  
messages, not total messages. The cordless phone plays the new messages first; after all the  
new messages are played, you can play the old messages.  
hint  
When the answering system is full, [  
] is displayed on the base, and the system  
announces "No remaining time." You should delete some messages so that the system can  
record new messages. (Refer to “Deleting a Message” on page 43.)  
Playing Your Messages  
1) With the phone in standby mode, press the  
(play/stop) key. The system announces the  
number of new and old messages. The LED  
displays the number of new messages, and the  
number flashes. The day and time that each  
message was received is announced after the  
message is played.  
To stop playing your  
messages, press the  
(play/stop) key again at  
any time.  
2) When all new messages have been played, you  
hear a confirmation tone and an  
announcement “End of messages.” The  
message counter displays the total number of  
stored messages, and the system returns to  
standby.  
w w w . u n i d e n . c o m  
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3) After you have reviewed your new messages, you can play your old messages by pressing  
the  
(play/stop) key again. Once you have listened to a new message, it becomes an  
old message. The old messages will be played in the order in which they were received.  
Repeating a Message  
1) With the phone in standby mode, press the  
(play/stop) key to review your messages.  
(repeat/rew) key while the message is  
The number of stored messages are announced.  
2) To repeat the current message, press the  
playing. To quickly scroll backwards through a message, press and hold the  
rew) key.  
(repeat/  
3) To go back to the previous message, press the  
(repeat/rew) key as soon as a message  
begins playing. Each time you press (repeat/rew), the system skips back one message.  
4) Press the  
standby.  
(play/stop) key at any time to stop reviewing messages and return to  
Skipping a Message  
1) With the phone in standby mode, press the  
The number of messages is announced.  
(play/stop) key to review your messages.  
2) Press the  
(skip/ff) key at any time to skip to the next message.  
Each time the  
(skip/ff) key is pressed, the system scans forward one message.  
[ 4 1 ] U S I N G Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
If you have several messages, press the  
(skip/ff) key repeatedly to find the message  
you want to play. To quickly scroll forward through a message, press and hold the  
(skip/ff) key.  
3) Press the  
(play/stop) key at any time to stop reviewing your messages and return to  
standby. The message counter shows the number of messages stored in memory.  
w w w . u n i d e n . c o m  
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting a Message  
To maintain maximum record time, delete the old  
messages. When you press the  
(delete) key,  
you are permanently deleting the message. Once  
deleted, the message cannot be replayed.  
1) Press the  
messages.  
(play/stop) key to review your  
2) Press the  
(delete) key anytime during the  
message to delete.  
3) You hear a confirmation tone and the message  
is deleted.  
You can also delete all the messages.  
1) With the phone in standby mode, press the (delete) key. You hear an announcement “To  
delete all messages, press delete again.”  
2) Press the  
(delete) key again.  
You hear a confirmation tone and [ ] is displayed on the base. All the messages are  
deleted.  
When you try to delete all messages without first listening to your new messages, you hear  
several short beeps followed by an announcement “Please playback all messages.” This  
protects you from accidentally erasing messages you have not yet reviewed.  
[ 4 3 ] U S I N G Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Voice Memo  
The voice memo function allows you to record messages  
as shorts as two seconds and as long as four minutes.  
note  
1) With the phone in standby mode, press and hold the  
memo rec key.  
When the answering  
system is full, [  
You hear an announcement “Record memo message”  
]
appears on the message  
counter, and recording is  
terminated.  
and a tone. [  
] flashes on the message counter.  
2) Start your recording.  
Every state has different  
regulations governing the  
recording of conversations  
over the telephone. Make  
sure to check your local,  
state and federal laws  
before using this product  
to record any telephone  
conversation in order to  
determine that your use is  
in compliance with such  
laws or guidelines.  
•A recorded conversation is  
treated as a typical  
message and will be added  
to the stored messages.  
When recording a  
conversation, all dialing  
features except for using  
call waiting (see page 19)  
are disabled. Stop  
recording if you need to  
enable any other handset  
keys.  
3) When you have finished, press the  
(play/stop),  
memo rec or set key to stop recording. You hear a  
confirmation tone, and the system returns to  
standby.  
Recording a Conversation  
You can record up to 10 minutes of conversation while you are using your phone. Any  
conversation that lasts less than two seconds will not be recorded.  
1) During a conversation from the handset, press and hold the memo rec key.  
The unit begins recording with a confirmation tone and [  
counter.  
] flashes on the message  
A beep that can be heard by both parties sounds during recording.  
If you receive a call waiting tone while recording a conversation, press the talk/flash  
key to accept the waiting call. The recording feature continues recording the new call.  
The original call is put on hold.  
2) To stop recording, press the  
You hear a confirmation tone.  
(play/stop) or memo rec key.  
w w w . u n i d e n . c o m  
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Handset Operation  
You can operate your answering system from another room using a handset.  
• If you press the end key before the answering system answers, the phone will return to  
standby.  
• If the answering system does not answer within five seconds, you hear beeps and the  
phone will return to standby.  
• The base's keypad is disabled during remote operation.  
• If you receive a call, the remote operation is canceled.  
• During the remote operation [--] appears on the base.  
• If you have new messages and old messages, only the new messages will be played. After  
you have reviewed your new messages, you can play your old messages by pressing the  
/2 key again.  
1) With the phone in standby mode, press the select/remote key on the handset. Remote  
AnsweringMachine operation appears on the display. The answering system announces  
the current time and the number of messages stored in the memory.  
2) You hear "To play incoming message, press two. For help, press zero."  
You hear intermittent beeps.  
3) Enter a command within 15 seconds. You may select a command from the following chart:  
Command  
Function  
Command  
Function  
Repeat a Message  
Stop Operation  
/1  
/5  
6
/2 Play Incoming Messages  
Answering System On  
Answering System Off  
Voice Prompts  
Skip a Message  
9
/3  
/4  
Delete a Message  
0
[ 4 5 ] U S I N G Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
     
4) After the command has finished, you hear intermittent beeps indicating that the system is  
in the command waiting mode. You may enter another command at this time from the  
chart above.  
tip  
5) When you are finished, hang up to exit the system. The answering system automatically  
returns to standby.  
For your convenience  
remote operation cards  
are provided for you to  
use while away from  
home (located in the  
back of this manual).  
Remote Operation  
When you are away from home, you can operate your answering system with any touch-tone  
telephone. Use this function to check for recorded messages, to play or delete messages,  
even record a new greeting message.  
1) Call your telephone number.  
2) During the greeting message, press 0 and enter your PIN code (see page 32).  
note  
3) The answering system announces the current time and the number of messages stored in  
memory. Then you hear "To play incoming message, press zero two.  
For help, press one zero."  
Once you enter the  
remote access menu,  
you must enter a  
command within 15  
seconds, or the  
answering system  
4) You may continue to listen to the voice prompts, or you may select a command from the  
following chart:  
automatically hangs up  
and returns to standby.  
w w w . u n i d e n . c o m  
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Command  
Function  
Repeat a Message  
Command  
Function  
Answering System On  
Memo Record/Stop*  
Greeting Message Record/Stop*  
Answering System Off  
Voice Prompts  
0 then 1  
0 then 2  
0 then 3  
0 then 4  
0 then 5  
0 then 6  
0 then 7  
0 then 8  
0 then 9  
1 then 0  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
*For Memo Record and Greeting Message Record functions, the first time you enter the  
corresponding command, it starts the Recording function. If you want to stop the  
recording, enter the command again.  
5) After all of the voice prompts have been played, you hear intermittent beeps indicating  
that the system is in the command waiting mode. You may enter another command at this  
time from the chart.  
6) When you are finished, hang up to exit the system. The answering system automatically  
returns to standby.  
[ 4 7 ] U S I N G Y O U R A N S W E R I N G S Y S T E M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
Turn on the Answering System Remotely  
If you have forgotten to turn on your answering system, you can turn it on remotely from  
any touch-tone telephone.  
1) Call your telephone number.  
2) Wait ten rings until the system answers. You hear intermittent beeps.  
3) Press 0 and then enter your PIN code. The answering system announces the number of  
messages stored in memory. You hear "To play incoming message, press zero two. For help,  
press one zero."  
4) Press 0 then 6 to turn the answering system on. You hear the outgoing message and a  
confirmation tone.  
5) Hang up the phone; subsequent calls will be answered by the system.  
w w w . u n i d e n . c o m  
U S I N G Y O U R A N S W E R I N G S Y S T E M [ 4 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Digital Security Code  
To protect you against misbilled calls which might result from your phone being activated by  
TM  
other equipment, the cordless phone provides AutoSecure (which electrically locks your phone  
TM  
when the handset is in the base) and Random Code digital security which automatically selects  
one of over 262,000 digital security codes for the handset and base.  
If the handset battery pack is completely discharged or the battery pack is removed, the digital  
security code will be lost. If this happens, a new security code is set automatically the next time  
the battery pack is charged. In the rare situation that you suspect another cordless telephone  
is using the same security code, you can change the code.  
1) Remove the handset from the base unit. Press and hold the find hs key on the base.  
2) While holding the find hs key, place the handset in the base unit and leave the handset in  
the base for more than 3 seconds. A new random security code is set.  
[ 4 9 ] C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Note on Power Sources  
Low battery alert  
When the battery pack is very low and needs to be charged, the phone is  
programmed to eliminate functions in order to save power. If the phone is not in  
use, Low Battery appears on the LCD and none of the keys will operate.  
If the phone is in use, Low Battery flashes and the handset beeps. Complete your  
conversation as quickly as possible and return the handset to the base unit for  
charging.  
Information stored in the phone's memory will be retained for 30 minutes after  
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID  
list.  
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum  
performance, be sure to return the handset to the base unit after a telephone call.  
Battery replacement and handling  
When the operating time becomes short even after a battery is recharged, please replace the battery.  
With normal usage, your battery should last about one year. A replacement battery may be purchased by calling  
Uniden’s Parts Department (see back cover page).  
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden  
battery model and Uniden adapter model specifically designated for this product.  
Caution  
Power Failure  
During the period that the power is off, you will not  
be able to make or receive calls with the telephone.  
• Use only the specified Uniden battery pack (BT-905 or BT-1006).  
• Do not remove the battery from the handset to charge it.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
w w w . u n i d e n . c o m  
N O T E O N P O W E R S O U R C E S [ 5 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Talk and Standby Times  
With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of  
standby time. When your handset is not being used and is left off of the charging cradle, the battery will gradually  
discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle  
after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced  
respective to the amount of time the handset is off of the charging cradle.  
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts  
on the handset once a month.  
Dampen a cloth with plain water. Gently rub the damp  
cloth over the charging contacts until all visible dirt is  
removed. Dry the contacts thoroughly before returning  
the handset to the base.  
Caution  
Do not use paint thinner, benzene,  
alcohol, or other chemical products.  
Doing so may discolor the surface of  
the telephone and damage the finish.  
[ 5 1 ] N O T E O N P O W E R S O U R C E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
General Information  
The phone complies with FCC Parts 15 and 68.  
Operating temperature: -10°C to +50°C (+14°F to +122°F)  
AC Adapter Information  
AC Adapter part number:  
Input Voltage:  
AD-314  
120V AC 60Hz  
9V DC 350 mA  
Output Voltage:  
Battery Information  
Battery part number:  
Capacity:  
BT-905  
600mAh, 3.6V  
BT-1006  
500mAh, 3.6V  
or  
Frequency  
924.516925 - 926.704425 MHz  
2,405.155942 - 2,411.718441 MHz  
To avoid damage to the phone use only Uniden AD-314 and BT-905 or BT-1006 with your phone.  
• If the handset is left off the base, the actual talk mode duration will be reduced respective to the amount of time  
the handset is off the base.  
Recharge your phone on a regular basis by returning the handset to the base after each phone call.  
When the operating time becomes short, even after the battery is recharged, please replace the battery.  
With normal usage, the battery should last about one year.  
A replacement Uniden adapter or battery may be purchased by calling Uniden’s Parts Department (see back cover  
page).  
Specifications, features, and availability of optional accessories are all subject to change without prior notice.  
w w w . u n i d e n . c o m  
G E N E R A L I N F O R M A T I O N [ 5 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve  
your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm,  
CST. Phone support is closed on holidays.)  
Symptom  
Suggestion  
The charge/in use LED won't  
• Make sure the AC adapter is plugged into the base and wall outlet.  
illuminate when the handset is • Make sure the handset is properly seated in the base.  
placed in the base.  
• Make sure the charging contacts on the handset are clean.  
The audio sounds weak and/or  
scratchy.  
• Move the handset and/or base away from metal objects or appliances and try again.  
• Press the delete/chan key in the talk mode to help eliminate background noise.  
• Make sure that the handset is not too far from the base.  
Can't make or receive calls.  
• Check both ends of the telephone line cord.  
• Make sure the AC adapter is plugged into the base and wall outlet.  
• Disconnect the AC adapter for a few minutes. Then reconnect it.  
• Change the digital security code (see page 49).  
• Make sure that the handset is not too far from the base.  
• Check the dialing mode used by your telephone company.  
[ 5 3 ] T R O U B L E S H O O T I N G  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Symptom  
Suggestion  
The handset doesn't ring or  
receive a page.  
• The battery pack may be weak. Charge the battery for 15-20 hours.  
• The handset may be too far from the base unit.  
• Place the base unit away from appliances or metal objects.  
• Change the digital security code (see page 49).  
• Check the battery pack to ensure there is a secure connection.  
• Make sure ringer volume isn't set to "off."  
Severe noise interference.  
• Keep the handset away from microwave ovens, computers, remote control toys, wireless  
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical  
appliances.  
• Move the base to another location or turn off the source of interference.  
The Caller ID does not display.  
• The call was answered before the second ring.  
• The call was placed through a switchboard.  
• Charge the handset.  
• Your Caller ID service may not be active; contact your local telephone service provider.  
The answering system does not • Make sure the AC adapter is plugged into wall outlet.  
work. • Make sure the answering system is turned on.  
The answering system does not • Set the record time to either the one minute or four minute option.  
record any messages.  
• The memory may be full. Delete some or all of the saved messages.  
Messages are incomplete.  
• The incoming messages may be too long. Remind callers to leave a brief message.  
• The memory may be full. Delete some or all of the saved messages.  
w w w . u n i d e n . c o m  
T R O U B L E S H O O T I N G [ 5 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Suggestion  
After a power failure, the  
• Record your personal outgoing message again. The default message should remain.  
outgoing message is deleted.  
No sound on the base unit  
speaker during call monitoring  
or message playback.  
• Adjust the speaker volume on the base unit.  
Cannot access remote call-in  
features from another touch-  
tone phone.  
• Make sure you're using the correct PIN code.  
• Make sure that the touch-tone phone you're using can transmit the tone for at least two  
seconds. If it cannot, you may have to use another phone to access your messages.  
[ 5 5 ] T R O U B L E S H O O T I N G  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but only affects the  
exterior plastic housing.  
Wipe off the liquid, and use as normal.  
If moisture or liquid has entered the  
Handset:  
plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation  
in the phone or liquid has entered the  
handset battery compartment or vent  
openings on the base).  
2.Remove the battery pack by disconnecting  
3.Leave the battery cover off and the battery pack disconnected for at least 3 days  
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.  
5.Recharge the handset’s battery pack for 20 hours before using again.  
Base:  
1.Disconnect the AC adapter from the base unit, cutting off electrical power.  
2.Disconnect the telephone cord from the base unit.  
3.Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the battery pack to  
avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work, please call our  
Customer Service Hotline at 1-800-297-1023.  
w w w . u n i d e n . c o m  
T R O U B L E S H O O T I N G [ 5 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Uniden works to reduce lead content in our PVC coated cords in  
our product and accessories.  
product. It is designed to be connected to a compatible modular  
jack that is also compliant. See installation instructions for  
details.  
Precautions!  
Before you read anything else, please observe the following:  
Warning!  
The REN is used to determine the number of devices that may be  
connected to a telephone line. Excessive RENs on a telephone line  
may result in the devices not ringing in response to an incoming  
call. In most but not all areas, the sum of RENs should not exceed  
five (5.0). To be certain of the number of devices that may be  
connected to a line, as determined by the total RENs, contact the  
local telephone company. For products approved after July 23,  
2001, the REN for this product is part of the product identifier  
that has the format US:AAAEQ##TXXXX. The digits represented by  
## are the REN without a decimal point (e.g., 03 is a REN of 0.3).  
For earlier products, the REN is separately shown on the label.  
If this equipment causes harm to the telephone network, the  
telephone company will notify you in advance that temporary  
discontinuance of service may be required. But if advance notice  
isn’t practical, the telephone company will notify the customer as  
soon as possible. Also, you will be advised of your right to file a  
complaint with the FCC if you believe it is necessary.  
Warning!  
The cords on this products and/or accessories contain lead, a  
chemical known to the State of California to cause birth defects or  
other reproductive harm. Wash hands after handling.  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage  
to the unit, DO NOT expose this unit to rain or moisture.  
Important Safety Instructions  
When using your telephone equipment, basic safety precautions  
should always be followed to reduce the risk of fire, electric shock  
and injury to persons, including the following:  
Rechargeable Nickel-Cadmium Battery Warning  
•This equipment contains a rechargeable nickel-cadmium battery.  
•Cadmium is a chemical known to the State of California to cause  
cancer.  
•The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
•Do not charge the rechargeable nickel-cadmium battery used in  
this equipment in any charger other than the one designed to  
charge this battery as specified in the owner’s manual.  
Using another charger may damage the battery or cause the  
battery to explode.  
1. Do not use this product near water, for example, near a bath  
tub, wash bowl, kitchen sink or laundry tub, in a wet basement  
or near a swimming pool.  
2. Avoid using a telephone (other than a cordless type) during an  
electrical storm. There may be a remote risk of electric shock  
from lightning.  
3. Do not use the telephone to report a gas leak in the vicinity of  
the leak.  
The telephone company may make changes in its facilities,  
equipment, operations or procedures that could affect the  
operation of the equipment. If this happens the telephone  
company will provide advance notice in order for you to make  
necessary modifications to maintain uninterrupted service.  
Please follow instructions for repairing, if any (e.g. battery  
replacement section); otherwise do not substitute or repair any  
parts of the device except as specified in this manual.  
Connection to party line service is subject to state tariffs. Contact  
the state public utility commission, public service commission or  
corporation commission for information. This equipment is  
hearing aid compatible.  
Should you experience trouble with this equipment, please  
contact Uniden customer service at 800-297-1023. If the  
equipment is causing harm to the telephone network, the  
telephone company may request that you disconnect the  
equipment until the problem is resolved.  
4. Use only the power cord and batteries indicated in this manual.  
Do not dispose of batteries in a fire. They may explode. Check  
with local codes for possible battery disposal instructions.  
5. Do not disassemble any component of this product.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
SAVE THESE INSTRUCTIONS  
•Uniden voluntarily participates in an RBRC® industry program to  
collect and recycle nickel-cadmium batteries at the end of their  
useful life, when taken out of service within the United States.  
The RBRC® program provides a convenient alternative to placing  
used nickel-cadmium batteries into the trash or municipal waste  
stream, which is illegal in some areas.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions. Do not  
open or mutilate the battery, and disconnect the battery before  
shipping this product.  
•Through the RBRC® program, Uniden makes it easy for you to  
drop off the used battery at local retailers of replacement nickel-  
cadmium batteries. You may also contact your local recycling  
center for information on where to return the used battery.  
Please call 1-800-8-BATTERY for information on Ni-Cd battery  
recycling in your area. Uniden's involvement in this program is  
part of its commitment to protecting our environment and  
conserving natural resources.  
The FCC Wants You To Know  
This equipment complies with Part 68 of the FCC rules and the  
requirements adopted by the ACTA. On the bottom of this  
equipment is a label that contains, among other information, a  
product identifier in the format US:AAAEQ##TXXXX. If requested,  
this number must be provided to the telephone company.  
An applicable Universal Service Order Codes (USOC) certification  
for the jacks used in this equipment is provided (i.e., RJ11C) in  
the packaging with each piece of approved terminal equipment.  
A plug and jack used to connect this equipment to the premises  
wiring and telephone network must comply with the applicable  
FCC Part 68 rules and requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is provided with this  
NOTICE: According to telephone company reports, AC electrical  
surges, typically resulting from lightning strikes, are very  
destructive to telephone equipment connected to AC power  
sources. To minimize damage from these types of surges, a surge  
arrestor is recommended.  
Changes or modifications to this product not expressly approved  
by Uniden, or operation of this product in any way other than as  
detailed by the owner's manual, could void your authority to  
operate this product.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) This device may not  
•RBRC® is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
[ 5 7 ] P R E C A U T I O N S & W A R R A N T Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
cause harmful interference, and (2) This device must accept any  
interference received, including interference that may cause  
undesired operation. Privacy of communications, may not be  
ensured when using this phone.  
To insure the safety of users, the FCC has established criteria for  
the amount of radio frequency energy various products may  
produce depending on their intended usage. This product has been  
tested and found to comply with the FCCís exposure criteria. For  
body worn operation, the FCC RF exposure guidelines were also  
met when used with the Uniden accessories supplied or designed  
for this product. Use of other accessories may not ensure  
compliance with FCC RF exposure guidelines and should be  
avoided.  
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some  
states do not allow this exclusion or limitation of incidental or  
consequential damages so the above limitation or exclusion may  
not apply to you.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications between  
the handset and base of your cordless telephone are accomplished  
by means of radio waves which are broadcast over the open  
airways.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state. This  
warranty is void outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner's manual you are certain  
that the Product is defective, pack the Product carefully  
(preferably in its original packaging). Disconnect the battery from  
the Product and separately secure the battery in its own separate  
packaging within the shipping carton. The Product should include  
all parts and accessories originally packaged with the Product.  
Include evidence of original purchase and a note describing the  
defect that has caused you to return it. The Product should be  
shipped freight prepaid, by traceable means, to warrantor at:  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices other  
than your own cordless telephone unit. Consequently, any  
communications using your cordless telephone may not be private.  
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service.  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects  
in materials and craftsmanship with only the limitations or  
exclusions set out below.  
Radio Interference  
Radio interference may occasionally cause buzzing and humming  
in your cordless handset, or clicking noises in the base. This  
interference is caused by external sources such as TV, refrigerator,  
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit  
is NOT DEFECTIVE. If these noises continue and are too  
distracting, please check around your home to see what  
appliances may be causing the problem. In addition, we  
recommend that the base not be plugged into a circuit that also  
powers a major appliance because of the potential for  
interference. Be certain that the antenna on the unit is fully  
extended when needed.  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect 12 months after the date of  
original retail sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B)  
modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C)  
improperly installed, (D) serviced or repaired by someone other  
than an authorized Uniden service center for a defect or  
malfunction covered by this warranty, (E) used in any conjunction  
with equipment or parts or as part of any system not  
manufactured by Uniden, or (F) installed or programmed by  
anyone other than as detailed by the owner's manual for this  
product.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving  
radio signals from another cordless telephone or other source of  
interference. If you cannot eliminate this type of interference, you  
need to change to a different channel.  
Finally, it should be noted that some cordless telephones operate  
at frequencies that may cause interference to nearby TVs and  
VCRs. To minimize or prevent such interference, the base of the  
cordless telephone should not be placed near or on top of a TV or  
VCR. If interference is experienced, moving the cordless telephone  
farther away from the TV or VCR will often reduce or eliminate the  
interference.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in  
effect, warrantor will either, at its option, repair or replace the  
defective unit and return it to you without charge for parts,  
service, or any other cost (except shipping and handling) incurred  
by warrantor or its representatives in connection with the  
performance of this warranty. Warrantor, at its option, may replace  
the unit with a new or refurbished unit. THE LIMITED WARRANTY  
SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES  
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER  
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,  
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS  
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT  
w w w . u n i d e n . c o m  
P R E C A U T I O N S & W A R R A N T Y [ 5 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is  
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that  
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical  
specifications were met. It does not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The  
REN assigned to each terminal equipment provides an indication of the maximum number of terminals  
allowed to be connected to a telephone interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of  
all the devices does not exceed five.  
RADIO EQUIPMENT  
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were  
met.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired  
operation of the device. “Privacy of communications may not be ensured when using this telephone.  
[ 5 9 ] I . C . N O T I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Charging the battery pack . . . . . .8  
Cleaning contacts . . . . . . . . . . . 51  
Clock . . . . . . . . . . . . . . . . . . . 31  
Connect the base unit . . . . . . . . .8  
Controls and functions . . . . . . . .3  
R
Index  
Receiving a call . . . . . . . . . . . . 16  
Record time . . . . . . . . . . . . . . 34  
Redial . . . . . . . . . . . . . . . . . . 17  
Remote operation . . . . . . . . . . 46  
Ring time . . . . . . . . . . . . . . . . 33  
Ringer tone . . . . . . . . . . . . . . 15  
Ringer volume (Base) . . . . . . . . 38  
A
AC adapter information . . . . . . . 52  
Answering system  
Deleting a message . . . . . . . . 43  
Playing a message . . . . . . . . 40  
Recording a conversation . . . . 44  
Remote operation . . . . . . . . . 46  
Repeating a message . . . . . . . 41  
Skipping a message . . . . . . . 41  
Turning on/off . . . . . . . . . . . 39  
D
Dial mode . . . . . . . . . . . . . . . . 14  
Digital security code . . . . . . . . . 49  
S
E, F, G, H, I, J, K, L  
Speed dial memory  
Earpiece volume . . . . . . . . . . . . 17  
Find handset . . . . . . . . . . . . . . 19  
General information . . . . . . . . . 52  
Greeting . . . . . . . . . . . . . . . . . 36  
Handset operation . . . . . . . . . . 45  
Headset installation . . . . . . . . . 11  
I.C. Notice . . . . . . . . . . . . . . . 59  
Installing the phone . . . . . . . . . .6  
Interference . . . . . . . . . . . . . . 58  
Liquid damage . . . . . . . . . . . . . 56  
Making calls from speed dial memory  
. . . . . . . . . . . . . . . . . . . . 24  
Storing names and numbers in speed  
dial memory . . . . . . . . . . . 20  
B
Basic setup . . . . . . . . . . . . . . 12  
Battery pack  
T, U  
Information . . . . . . . . . . . . . 52  
Installing . . . . . . . . . . . . . . . 7  
Preparing and charging . . . . . . 7  
Replacement and handling . . . 50  
Beltclip installation . . . . . . . . . 10  
Talk and Standby Times . . . . . . 51  
Technical information . . . . . . . . 52  
Tone dialing switch-over . . . . . . 18  
Traveling out-of-range . . . . . . . 18  
Troubleshooting . . . . . . . . . . . 53  
M, N, O, P, Q  
C
Making a call . . . . . . . . . . . . . . 16  
Menu mode . . . . . . . . . . . . . . . 30  
Message alert . . . . . . . . . . . . . . 34  
Outgoing message . . . . . . . . . . 36  
Personal security code (PIN code) 32  
Precautions . . . . . . . . . . . . . . . 57  
V, W, X, Y, Z  
Voice Memo . . . . . . . . . . . . . . 44  
Volume control  
Base . . . . . . . . . . . . . . . . . 38  
Handset . . . . . . . . . . . . .15, 17  
Wall mounting . . . . . . . . . . . . . 9  
Warranty . . . . . . . . . . . . . . . . 58  
Call waiting . . . . . . . . . . . . . . 19  
Caller ID service . . . . . . . . . . . 25  
Call waiting . . . . . . . . . . . . . 19  
Deleting . . . . . . . . . . . . . . . 27  
Making a call . . . . . . . . . . . . 28  
Viewing . . . . . . . . . . . . . . . 26  
Channel . . . . . . . . . . . . . . . . . 18  
w w w . u n i d e n . c o m  
I N D E X [ 6 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Memo  
w w w . u n i d e n . c o m  
[ 6 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Operation Card  
C
U
T
C
U
T
REMOTE OPERATION CARD  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Remote access away from home  
Turn on the answering system remotely  
1. Call your phone number from a 1. Call your phone and let it ring  
1*  
2
touch-tone phone.  
10 times until it answers.  
2. Press 0 and enter your PIN  
code.  
3. Press 0 then 5 to stop  
the announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts. The  
phone stands by for you to  
enter a command.  
3
4
5
3. To quit, hang up the phone.  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
REMOTE OPERATION CARD  
Memory  
Location  
Remote access away from home  
Turn on the answering system remotely  
1. Call your phone number from a 1. Call your phone and let it ring  
1*  
2
touch-tone phone.  
10 times until it answers.  
2. Press 0 and enter your PIN  
code.  
3. Press 0 then 5 to stop  
the announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts. The  
phone stands by for you to  
enter a command.  
3
4
5
3. To quit, hang up the phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Operation Card  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Key  
0
1
2
3
4
5
6
7
8
9
0
Memory  
Location  
0
0
0
0
0
0
0
0
1
6
7
8
Greeting Message Record/Stop  
Answer System Off  
Voice Prompts  
9
10  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Key  
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Memory  
Location  
6
7
8
Greeting Message Record/Stop  
Answer System Off  
Voice Prompts  
9
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. If you have any questions or problems,  
please do not return this product to the place of purchase.  
Having Trouble?  
call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m.  
to 5 p.m. CST. (Phone support is closed on holidays.)  
Need a part?  
To order headsets, additional handsets, replacement batteries or other accessories, visit  
our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST.  
Help for our Special Needs Customers  
If you need special assistance due to a disability or have questions on the accessibility  
features of this product, please call 1-800-874-9314 (voice or TTY)  
May be covered under one or more of the following U.S. patents:  
4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010  
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981  
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289  
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619  
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358  
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278  
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920  
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940  
6,953,118 7,023,176  
Other patents pending.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
REGISTER ONLINE TODAY!  
THANK YOU FOR BUYING A UNIDEN PRODUCT.  
©2006 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Printed in China.  
UPZZ01079ZZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toastmaster Coffeemaker MEFB6B User Manual
Toshiba Laptop U205 S5057 User Manual
Trane Air Conditioner 060E User Manual
Transition Networks Network Card SSETF10XX 200 User Manual
Troy Bilt Snow Blower 769 03251 User Manual
VDO Dayton Car Video System DOM 6500 User Manual
Verizon Cell Phone SCHI600 User Manual
ViewSonic Car Video System VA2046a LED User Manual
Vizio Model Vehicle M420KD User Manual
Vulcan Hart Griddle E24L User Manual