Uniden Cordless Telephone EWCI 936 User Manual

EWCI 936

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 1 Wednesday, June 16, 2004 2:14 PM

Contents

Making Calls from Speed Dial Memory

Making a Call from the Caller ID List

Adjusting the Earpiece Volume

Using a Headset

Welcome/Features

Controls and Functions

Terms Used in this Manual

Headset installation

Getting Started

Making calls with the headset

Receiving calls with the headset

Installing the Beltclip

Installing the Phone and Outdoor Weather Sensor

A. Choose the Best Location

Base and Handset

Tone Dialing Switch-over

Traveling Out-of-Range

B. Install the Rechargeable Battery Pack into the Handset 8

C. Connect the Base, Set up the Outdoor Weather Sensor

and Charge the Handset

Selecting a Different Channel

Finding a Lost Handset

D. Mount the Outdoor Weather Sensor on a Wall

E. Mount the Base Unit on a Wall

Weather Menu Options

Set the Alarm Clock

Basic Phone Setup

Programming Memory Locations/Caller ID/Speed Dialing

Storing Names and Numbers in Speed Dial Memory

Storing Caller ID Messages in Speed Dial Memory

Caller ID and Caller ID on Call Waiting (CIDCW)

When the Telephone Rings

Viewing the Caller ID Message List

Deleting Information from the Caller ID List

Using the Weather Station

Reading the Weather Display at the Base

Reading the Weather Data from the Handset

Using Call Waiting

Voice Mail Waiting Indicator

Additional Information

Changing the Digital Security Code

Note on Power Sources

General Information

Troubleshooting

Liquid Damage

Precautions & Warranty

I.C. Notice

TERMINAL EQUIPMENT

RADIO EQUIPMENT

Index

Memory List

Using Your Phone

Making and Receiving Calls

w w w . u n i d e n . c o m

[ 1 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 2 Wednesday, June 16, 2004 2:14 PM

Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and

Welcome

Features

engineered to exacting standards for reliability, long life, and outstanding performance.

Note:Illustrations in this manual are used for explanation purposes. Some

illustrations in this manual may differ from the actual unit. The color of your

cordless phone may vary.



As an Energy Star Partner, Uniden has determined that this product or product



models meets the Energy Star guidelines for energy efficiency. Energy Star is

a U.S. registered mark.

• 900MHz Extended Range Technology

• Caller ID and Caller ID on Call Waiting

• 30 Caller ID feature

• Weather Forecast Display at both Handset

& Base

•Backlit Displays with Contrast Control

at Base

• 10 Number Memory Dialing

• Last Number Redial

• Voice Mail Waiting Indicator at Base

• English, French or Spanish Support

• Pulse/Tone Dialing

• Weather Forecast Display (Barometric

Trend, Moon Phase, Tide Level, Indoor

and Outdoor Temperature/Humidity)

• Time and Date Display

• Find Handset Locator

• Earpiece & Ringer Volume Control

• Hearing Aid Compatible

• Alarm with Snooze Feature

• Channel Autoscan (Handset-Base)

Be sure to visit our web site: www.uniden.com

Uniden® is registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of

Uniden America Corporation.

w w w . u n i d e n . c o m

W E L C O M E / F E A T U R E S [ 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 3 Wednesday, June 16, 2004 2:14 PM

Controls and Functions

Handset

1. Handset antenna

2. Jack for optional headset

3. Beltclip hole

4. Handset battery compartment

5. Handset earpiece

6. LCD display

/vol/

(earpiece volume, ringer

volume and scroll) key (pages 20, 22 and

37)

8. Call id/menu key (pages 19 and 28)

9. /tone/← key (left cursor) key

(pages 24 and 40)

10. Redial/pause key (pages 25 and 36)

11. Select key (page 19)

12. Talk/flash key (pages 35 and 41)

13. End key (pages 35 and 37)

14.

(weather forecast) key (page 34)

15. #/→ (right cursor) key (page 24)

16. Mem (memory dial) key (page 23)

17. Delete/channel key (pages 24, 29 and 40)

18. Handset microphone and ringer speaker

19. Handset charging contacts

w w w . u n i d e n . c o m

[ 3 ] C O N T R O L S & F U N C T I O N S

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 4 Wednesday, June 16, 2004 2:14 PM

20. Base charging contacts

21. Charge/in use and VMWI

(Voice Mail Waiting Indicator) LED

22. Snooze button (page 18)

23. LCD display

24. Alarm switch (page 17)

25. Find handset key (pages 41 and 43)

26. Select key (page 14)

Base

29 30

27.

(scroll) key

(page 14 and 17)

28. Enter key (page 14)

29. DC IN 9V jack

30. Telephone line jack

26 27 28

Outside Weather Sensor

31 3233

31. Channel switch (page 10)

32. Check Battery button

33. Battery check LED

w w w . u n i d e n . c o m

C O N T R O L S & F U N C T I O N S [ 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 5 Wednesday, June 16, 2004 2:14 PM

Terms Used in this Manual

• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has not

been pressed and there is no dial tone.

• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.

• CID - Caller ID

• CIDCW - Caller ID on Call Waiting

w w w . u n i d e n . c o m

[ 5 ] T E R M S U S E D I N T H I S M A N U A L

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 6 Wednesday, June 16, 2004 2:14 PM

Installing the Phone and Outdoor Weather

Sensor

note

Do the following steps:

A. Choose the Best Location (Base and Handset)

B. Install the Rechargeable Battery Pack into the Handset

C. Connect the Base, Set up the Outdoor Weather Sensor and Charge the Handset

D. Mount the Outdoor Weather Sensor on a Wall

E. Mount the Base Unit on a Wall (if desired)

If your home has

specially wired alarm

equipment connected to

the telephone line, be

sure that installing the

system does not disable

your alarm equipment.

A. Choose the Best Location

Base and Handset

If you have questions

about what will disable

your alarm equipment,

contact your telephone

company or a qualified

installer.

When choosing a location for your new phone, here are some important guidelines you should

consider:

Avoid heat sources, such as radiators,

air ducts, and sunlight

Avoid noise sources such as a window by

a street with heavy traffic

Avoid television sets and other

electronic equipment

Avoid microwave ovens

Avoid excessive moisture,

extremely low temperatures, dust,

mechanical vibration, or shock

Choose a central location

Avoid personal computers

Avoid other cordless telephones

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 7 Wednesday, June 16, 2004 2:14 PM

• Depending on the base location, there is a possiblity that the correct temperature and

humidity can't be displayed.

• Do not place any objects around the base.

• The base should be placed in a well-ventilated area.

• The location should be close to both a phone jack and a continuous power outlet (one which

is not connected to a switch).

• The base and handset should be kept away from sources of electrical noise such as motors,

microwave ovens, and fluorescent lighting.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

Outdoor Weather Sensor

The outdoor weather sensor monitors the outdoor temperature, air pressure, and humidity and sends

the received data to the base. Proper installation of outdoor weather sensors improves the accuracy

of the readings. Excessive heat, wind, and moisture can affect the sensor's readings. Follow the

guidelines below to get the most accurate information from your outdoor weather sensor:

• Do not mount the sensor in direct sunlight. Direct sunlight on the sensor will cause an

artificially high temperature reading.

• Do not mount the sensor where it will be exposed to rain and snow. Moisture on the sensor

may affect the temperature and humidity readings.

• Do not mount the sensor in the draft of an exhaust vent (e.g., from a heater, stove, or dryer).

• Do not mount the sensor above surfaces that radiate a lot of heat (e.g., bare concrete or blacktop). If

you can feel the temperature increase as you cross the surface, you should not put the sensor there.

• Try to avoid mounting the sensor close to plants or trees.

• Mount the sensor in a location where the airflow is representative of the surrounding area. If

the location of the sensor is unusually breezy or unusually still compared to the surrounding

area, the readings may be affected.

• Mount the sensor at least 60 inches above the ground.

• Mount the sensor 24 to 36 inches away from roof eaves, doors, or windows.

• If you are mounting the sensor above plants, the plants should be no higher than 10 inches above the ground.

• If your region gets snow, mounts the sensor at least 24 inches above the average maximum snow level.

• In the US and Canada, the north side of the building is considered the best location due to the angle of the sun.

[ 7 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 8 Wednesday, June 16, 2004 2:14 PM

B. Install the Rechargeable Battery Pack into the Handset

The handset is powered by a rechargeable battery pack.

The battery recharges automatically when the handset is

placed in the base unit.

•Use only the Uniden

(BT-905) rechargeable

battery pack supplied

with your cordless

telephone.

1) Press down on the handset battery case cover (use

the finger indention for a better grip) and slide the

cover downward to remove.

2) Plug the battery pack connector (red & black wires)

into the jack inside the battery compartment. (The

connector notches fit into the grooves of the jack

only one way.) Match the wire colors to the polarity

label in the battery compartment, connect the

battery and listen for a click to insure connection.

•Replacement batteries

are also available

through the Uniden

Parts Department at

(800) 554-3988,

Monday through Friday

from 7:00 a.m. to 7:00

p.m., Saturday,

3) Make sure you have a good connection by slightly

pulling on the battery wires. If the connection is

secure, the battery jack will remain in place.

Sunday, and holidays

from 9:00 a.m. to 5:00

p.m., or online at

www.uniden.com

4) Place the battery case cover back in the handset by

sliding it upwards until it clicks into place.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 9 Wednesday, June 16, 2004 2:14 PM

C. Connect the Base, Set up the Outdoor Weather Sensor and Charge

the Handset

1) Connect the AC adapter to the DC IN 9V jack and to a

standard 120V AC wall outlet.

•Connect the AC adapter

to a continuous power

supply.

The base will attempt to contact the outdoor weather

sensor for five minutes after it is first connected.

Install the Alkaline batteries in the outdoor weather

sensor immediately after connecting the base to power.

•Place the base unit

close to the AC outlet

to avoid long

2) Take off the knob on the back of the outdoor weather

sensor with a screwdriver or a coin. Remove the cover.

extension cords.

•Use only the supplied

AD-314 AC adapter.

Do not use any other

AC adapter.

[ 9 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 10 Wednesday, June 16, 2004 2:14 PM

3) Install the Alkaline batteries into the battery

compartment observing the correct polarity. Make sure

the outdoor temperature and humidity appear on the

base display within five minutes. If the outdoor

temperature and humidity don't appear, switch the

Channel switch to another channel and remove the

batteries. Install the batteries again.

•Use only the Alkaline

batteries supplied with

your outdoor weather

sensor.

4) Replace the cover and tighten the knob with a screwdriver

or a coin.

•The base LCD will blink

and prompt you to set

the time. See "A. Set

the Time" on page 14

for the instructions on

how to set the time.

5) Place the handset in the base unit with the keypad

facing forward. Set up the outdoor weather sensor

according to page 7.

•Once the outdoor

temperature and

humidity appear on

the base display, do

not change the

channel unless you

replace the batteries.

6) Make sure the charge/in use LED illuminates.

If the LED does not illuminate, check to see that the

AC adapter is plugged in and the handset makes good

contact with the base charging contacts.

Charge your handset at least 15-20 hours before plugging into the phone line.

7) Once the handset battery pack is fully charged,

connect the telephone line cord to the TEL LINE

jack and a telephone outlet.

•Do not place the power

cord where it creates a

trip hazard or where it

could become chafed

and create a fire or

electrical hazard.

Modular

If your telephone outlet isn't modular, contact your

telephone company for assistance.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 11 Wednesday, June 16, 2004 2:14 PM

D. Mount the Outdoor Weather Sensor on a Wall

Follow the instructions below to mount the outdoor weather sensor on the wall. See page 7

to make sure you are mounting the weather sensor in the best location.

• Avoid electrical cables, pipes, or other items behind the mounting location that could

cause a hazard when inserting screws into the wall.

• Make sure the wall material is capable of supporting the weight of the outdoor weather

sensor.

• Use # 10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the

wall material where the wall mount holder will be placed.

1) Thread a screw through two kinds of washers in accordance with the order as shown.

2) Insert the screw with the two washers into the wall with a little

looseness to fix the upper hole of the wall mount holder as shown.

3) Thread the other screw through two kinds of washers with the same

order in step 1, and then insert it into the lower hole of the wall

mount holder as shown.

4) Tighten both upper and lower screws using a screwdriver.

5) Insert the outdoor weather sensor in the wall mount holder.

[ 1 1 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 12 Wednesday, June 16, 2004 2:14 PM

E. Mount the Base Unit on a Wall

Standard wall plate mounting

This phone can be mounted on any standard

wall plate.

1) Plug the AC adapter to the DC IN 9V jack.

2) Route the AC adapter cord through the

molded wiring channel as shown.

3) Plug the AC adapter into a standard 120V

AC wall outlet.

4) Plug the telephone line cord into the TEL

LINE jack. Route the cord through the

molded wiring channel as shown.

5) Plug the telephone line cord into the

telephone outlet.

6) Align the mounting slots on the base with

the mounting posts on the wall. Then push

in and down until the phone is firmly

seated.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 13 Wednesday, June 16, 2004 2:14 PM

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location that could cause a hazard when inserting screws into the

wall.

• Try to mount your phone within 5 feet of a working phone jack to

avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-

15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for

mounting the phone.

2) Refer to steps 1 through 6 on page 12 to mount the telephone.

[ 1 3 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 14 Wednesday, June 16, 2004 2:14 PM

Weather Menu Options

To set the following four options, you must enter the base setup menu mode.

To scroll through the menu options, repeatedly press the select key in standby mode. The

system returns to standby after the each last menu option.

• If any of the following occurs during menu setup, you will have to

start over with the procedure you were performing.

-Caller ID message is received

-The alarm switch is changed to set.

-Two minutes elapse without a key press

-The AC power is off

select

Time

Date

Temperature

LCD backlight

A. Set the Time

1) Press the select key on the base once.

2) Use the

press the enter key.

3) Use the and

and

keys to select 12-hour (12h) or 24-hour (24h) time display, and then

keys to set the hour (1-12) for 12-hour style or (0-23) for 24-hour

style, and then press the enter key.

4) Use the

and

keys to set the minute (00-59), and then press the enter key.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 15 Wednesday, June 16, 2004 2:14 PM

5) If you select 12h in Step 2. you need to select AM or PM. Use the

and

keys to

choose AM or PM, and then press the enter key. The setting is complete; the phone

returns to standby mode.

Press and hold the

and

keys to scroll quickly through the numbers for hour and

minute on the display.

B. Set the Date

1) Press the select key on the base twice.

2) Use the

3) Use the

4) Use the

and

keys to select the year (2004-2030) and then press the enter key.

keys to set the month, and then press the enter key.

keys to set the day (1-31), and then press the enter key. The setting

is complete; the phone returns to standby mode.

•Once a data is entered, the day of the week, Tide and Moon Phase change automatically.

•Press and hold the

and

keys to scroll quickly through the display.

[ 1 5 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 16 Wednesday, June 16, 2004 2:14 PM

C. Set the Temperature

1) Press the select key on the base three times.

Use the

and

keys to choose Temperature For Temperature Cand then

press the enter key. The setting is complete, and the phone returns to standby mode.

D. Set Display Backlight

1) Press the select key on the base four times.

2) Use the

and

keys to choose Backlight High or Backlight Lowand then

press the enter key. The setting is complete, and the phone returns to standby mode.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

CH08'_Direct&Others.fm Page 17 Wednesday, June 16, 2004 2:55 PM

Set the Alarm Clock

note

Set the Alarm

•If the alarm setting is

on and the time you

have set comes, the

alarm will ring.

•The alarm operation is

completely

independent from the

handset operation. The

alarm tone continues

to ring despite any

handset operation.

•If an incoming call is

received while you are

setting the alarm time,

the display shows the

Caller ID message, then

the phone returns to

the alarm setting

1) Slide the alarm switch on the base to set (the alarm switch is on the right of the

display.) The current alarm time on the display blinks, and ^ALARMSET appears on the

display.

2) Use the

and

keys to select the time you want the alarm to go off.

3) Slide the alarm switch on the base to on, and then ALARM ON and setting time appear on

the display.

mode.

[ 1 7 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 18 Wednesday, June 16, 2004 2:14 PM

Turning off the Alarm

When the alarm is set and the selected time comes, the alarm tone rings for ten minutes.

To turn off the alarm tone, slide the alarm switch to off, and then ^ALARMOFF appears on the

display.

note

Snooze Feature

If the alarm is reset

while the snooze feature

is on, the phone returns

to standby mode.

To stop the alarm tone temporarily, press the snooze button.

The alarm tone will ring again in five minutes.

Adjust the Base LCD Contrast

With the phone in standby mode, use the

Contrast Low

and

to select Contrast Highor

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 19 Wednesday, June 16, 2004 2:14 PM

Basic Phone Setup

There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call

Waiting), Area Code, Dial Mode and Language.

Activating AutoTalk (on/off)

AutoTalk allows you to answer the phone simply by removing the handset from the base. You

do not have to press any keys.

1) With the phone in standby mode, press and hold the call id/menu

key. The following screen appears.

2) Press the select key to turn AutoTalk on.

3) Press the end key to complete the setting. The handset returns to standby mode.

Activating CIDCW (Caller ID on Call Waiting)

Caller ID allows you to see the name and number of the calling party before you answer the

phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that

comes in when you are on the line.

You must subscribe to Caller ID service through your local telephone provider to use this

feature.

1) With the phone in standby mode, press and hold the call id/menu

key. The following screen appears.

[ 1 9 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 20 Wednesday, June 16, 2004 2:14 PM

2) Press the /vol/

key to select CIDCW.

3) Press the select key to toggle and turn on Caller ID on Call Waiting.

4) Press the end key and return the handset to the base unit to complete the setting. The

handset returns to standby mode.

Entering Your Area Code

If you enter a 3-digit area code number in the Area Code option, your local area code does not

appear in Caller ID messages. Do not program this option if your calling area requires 10-digit

dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For

calls received from outside your local area code, you will see a full 10-digit number.

1) With the phone in standby mode, press and hold the call id/menu

key. The following screen appears.

2) Press the /vol/

key twice to select ^AreaCode.

3) Press the select key. If an area code was already stored, the

phone will display it.

4) Use the number keys (0 - 9) to enter the 3-digit area code. If you

make an error or delete the current area code, use the delete/

channel key to backspace.

5) Press the select key. A confirmation tone sounds.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 21 Wednesday, June 16, 2004 2:14 PM

6) Press the end key to complete the setting. The handset returns to standby mode.

note

Choosing the Dialing Mode (pulse vs. tone)

Most phone systems use tone dialing. However some phone systems (such as in rural areas)

still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default

setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to

change the dialing mode:

•If you are not sure of

your dialing system,

make a trial call. If the

call connects, leave

the setting as is.

Otherwise, set for

pulse dialing.

1) With the phone in standby mode, press and hold the call id/menu

key. The following screen appears.

2) Press the /vol/ key three times to select Dial.

•If your phone system

requires pulse dialing

and you need to send

DTMF tones during a

call, you can

3) Press the select key to set the phone to pulse dialing.

4) Press the end key to complete the setting. The handset returns to

temporarily switch

over to tone dialing.

(Refer to “Tone Dialing

Switch-over” on

standby mode.

Setting the Language (English, French or Spanish)

There are three languages to choose from: English, French and Spanish.

page 40.)

1) With the phone in standby mode, press and hold the call id/menu

key. The following screen appears.

2) Press the /vol/ key four times to select ^Language.

[ 2 1 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 22 Wednesday, June 16, 2004 2:14 PM

3) Press the select key to select Eng. (English), Fr. (French) or Esp

(Spanish).

4) Press the end key to complete the setting. The handset returns to

standby mode.

Selecting the Ring Tone and Volume

Your phone has two different ringer tones (A and B) and two different volumes for each (low

and high).

1) With the phone in standby mode, press the /vol/ or /vol/ key to cycle through

Ringer A High, Ringer A Low, Ringer B High, Ringer B Low, and Ringer Off.

2) When the phone sounds the ring tone and volume you wish to use, press the end key.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 23 Wednesday, June 16, 2004 2:14 PM

Programming Memory Locations/Caller ID/Speed

Dialing

note

The speed dial memory allows you to store up to 10 names and numbers in the handset. You

can dial these numbers with just a few key presses.

When editing the speed

dial memory, you must

press a key within 30

seconds or the phone

will return to standby

mode. If you return the

handset to the base, the

phone will return to

standby mode also.

The speed dial memory is not limited to phone numbers. You can store any number (up to 20

digits) that you need to enter once your call connects. This is referred to as Chain Dialing.

For example, you can save your bank account number to speed dial memory. When you call

your bank's telephone teller service and are prompted to enter your account number, simply

press the mem key and the speed dial number where you stored your account number. Then

press the select key.

Storing Names and Numbers in Speed Dial Memory

Entering letters and special characters

1) With the phone in standby mode, press the mem key.

2) Enter 0-9 to select the speed dial number where you would like to

store this entry. You can also scroll through the list with the

vol/ and

/vol/

keys. Press the select key twice.

3) ^{Store Name}appears and a cursor flashes indicating that the

display is ready for the name to be entered.

[ 2 3 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 24 Wednesday, June 16, 2004 2:14 PM

If the selected speed dial number is already assigned, the Edit

screen appears. You can select Edit to edit this entry, select

Delete to erase this entry, or select Go Back to choose another

speed dial number.

note

4) Enter a name according to the instructions below, then press the select key. If no name is

required, go to "Entering phone numbers" on page 25.

If the next character

uses the same number

key, you must press the

#/→ key to move the

cursor over. Otherwise

the next time you press

the number key, it

• The name can be up to 13 characters.

• Use the #/→ and /tone/← keys to move the cursor to the desired location.

• Use the delete/channel key to delete characters as needed.

• Press and hold the delete/channel key to delete all the characters.

Refer to the letters on the number keys to select the desired characters.

With each press of a numeric key, the displayed character appears in the following order:

Upper case letters first, lower case letters next and finally the number corresponding to

the key.

changes the character

that was previously set.

If you make a mistake while entering a name

Use the /tone/← or #/→ key to move the cursor to the incorrect character.

Press the delete/channel key to erase the wrong character. Then enter the correct

character. To delete all characters, press and hold the delete/channel key.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 25 Wednesday, June 16, 2004 2:14 PM

Number of times key is pressed

For example, to enter Movies.

1) Press 6. Then press the #/→ key to

move the cursor to the right.

2) Press 6 six times.

keys

2abc

3def

3) Press 8 six times.

4ghi

5jkl

4) Press 4 six times.

6mno

5) Press 3 five times.

7pqrs

8tuv

6) Press 7 eight times.

9wxyz

0^oper

Entering phone numbers

1) Store Numberis displayed. The cursor flashes indicating that the

display is ready for the number to be entered.

2) Use the keypad to enter the phone number; each number can be up

to 20 digits.

If you need the phone to pause during the dialing sequence, press

the redial/pause key to insert a two-second delay between the

numbers. You can enter multiple pauses to increase the delay. Each

pause counts as a digit. The display shows a

for every pause.

When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more

than 30 seconds, it will beep rapidly, and the phone will return to standby mode.

[ 2 5 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 26 Wednesday, June 16, 2004 2:14 PM

3) Press the mem key. You will hear a confirmation tone, and the

following screen appears.

Memory storage is complete.

After about 2 seconds, the following screen displays all the speed

dial memory entries.

note

You cannot store a

Caller ID message if no

phone number appears

in the message.

4) Press the end key to exit memory setup mode. The phone returns to standby.

Storing Caller ID Messages in Speed Dial Memory

Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory

dialing. For instructions on viewing the Caller ID Message list, see page 28.

1) Press the call id/menu key. Select the phone number to be stored

from the Caller ID list by pressing the /vol/ or /vol/ key.

2) Press the mem key.

3) Enter a number (0 - 9) or press the /vol/ or /vol/ key

to select the memory location to be stored.

4) Press the select key. You hear a confirmation tone, and the number

is stored in memory. The display returns to the Caller ID list.

If a message has already been stored in the selected memory

number location, a confirmation screen is displayed.

Press the

/vol/

key to select ^Yes. Press the select key to

overwrite. The display returns to the Caller ID list.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 27 Wednesday, June 16, 2004 2:14 PM

Caller ID and Caller ID on Call Waiting (CIDCW)

You must subscribe to Caller ID service through your local telephone provider to use

this feature. When the telephone rings, the Caller ID feature allows you to view the caller's

name, phone number, date and time of call (The date and time display only on the handset).

The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. With

Caller ID on Call Waiting (CIDCW), you will hear a Call Waiting tone while you are on a call,

and the Caller ID data is displayed. To accept the waiting call, press the talk/flash key (see

page 41.)

note

•If you answer a call

before the Caller ID

message is received

(for example, before

the second ring), the

Caller ID message will

not appear.

Additionally, you can dial a number stored in the Caller ID list or save data to your Memory

dial list (see page 26).

When the Telephone Rings

•When the call is

received via a

telephone company

that does not offer

Caller ID service, the

caller's phone number

and name do not

When the Caller ID message is received, the display shows the caller's phone number. The

handset display shows the date and time also. The incoming call information is stored in the

handset Caller ID record. If the Caller ID service includes the caller's name, the caller's name

appears on the display (up to 15 letters).

(Handset)

(Base)

appear. (This includes

international calls.)

The date and

time received

The current time

Caller's name

Caller's phone number

•When the call is via a

private branch

Caller's name

exchange (PBX), the

caller's phone number

and name may not

appear.

Caller's phone number

You may receive any one of the following messages:

When invalid data is received

Incomplete Data

When a private name is received

Private Name

[ 2 7 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 28 Wednesday, June 16, 2004 2:14 PM

When a private number is received

When a unknown name is received

When a unknown number is received

Private Number

Unknown Name

note

Unknown Number

Data errors appear as ¨ ¨.

•In Caller ID operation,

if no key is pressed for

more than 30 seconds,

an error tone sounds

and the telephone

returns to standby

mode.

Viewing the Caller ID Message List

1) With the phone in standby mode, press the call id/menu key on

the handset.

•Each message can be

up to 15 characters for

the name and 15 digits

for the phone number.

The summary screen appears. The screen shows the number of new

messages and total messages.

2) Press the /vol/ key to view the messages from the most

•The number of calls

from the same Caller ID

appears next to the

received time. Once

you view the new

message, the number

will be cleared and

disappear.

recent to the oldest. Press the /vol/

from the oldest to the most recent.

key to view messages

3) Press the end key to return to standby mode.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 29 Wednesday, June 16, 2004 2:14 PM

Deleting Information from the Caller ID List

The cordless phone stores up to 30 Caller ID names/numbers. If the phone receives the 31st

Caller ID, the oldest one in the list is automatically deleted. Caller ID data can also be

deleted manually.

note

•While using the Delete

All?or Delete

Deleting a Caller ID message

1) With the phone is standby mode, press the call id/menu key on

^Message?screen, if no

key is pressed for more

than 30 seconds, an

error tone sounds, and

the handset returns to

standby mode.

the handset. Find the message to be deleted from the Caller ID

list by pressing the

/vol/ or

/vol/

key.

2) Press the delete/channel key.

3) Press the /vol/ or

/vol/

key to select ^Yes, and then

•If you get an incoming

call or page, the

deleting operation is

canceled, and you can

answer the call or

page.

press the select key.

Deleting all Caller ID names/numbers

1) With the phone in standby mode, press the call id/menu key.

2) Press the delete/channel key.

3) Press the /vol/ or

/vol/

key to select Yes, and then

press the select key.

You hear a confirmation tone and all stored Caller ID messages are

deleted.

[ 2 9 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 30 Wednesday, June 16, 2004 2:14 PM

Reading the Weather Display at the Base

Example of the standby mode display

Time

Day of the week and date

Alarm setting time

The phase of the moon

The barometric trend

Weather forecast

The tide level

Outdoor temperature

Indoor temperature

Outdoor humidity

Indoor humidity

w w w . u n i d e n . c o m

U S I N G T H E W E A T H E R S T A T I O N [ 3 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 31 Wednesday, June 16, 2004 2:14 PM

A. The Weather Forecast

The Weather Forecast system displays the weather type forecasted for the next 12 hours to 24

hours. There are three types of Weather: Sunny, Cloudy or Rainy. These weather types are

displayed on the base with the icons shown below:

Sunny

Cloudy

Rainy

B. The Barometric Trend

The barometric trend system displays the current changes in barometric pressure using the

icons shown below:

Rising pressure

Stable pressure

Falling pressure

[ 3 1 ] U S I N G T H E W E A T H E R S T A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 32 Wednesday, June 16, 2004 2:14 PM

C. The Phases of the Moon

The phases of the moon system displays the current phase of the moon using the 12 icons

shown below. The phases of the moon displayed depend on the date and time set on the base;

if an incorrect date or time is set on the base, the phases of the moon may not display

correctly.

New Moon Small Waxing Large Waxing First Quarter

Crescent

LargeWaxing SmallWaxing Full Moon

Gibbous Gibbous

Small Waning

Gibbous

Large Waning Last Quarter Large Waning Small Waning

Gibbous

Crescent

w w w . u n i d e n . c o m

U S I N G T H E W E A T H E R S T A T I O N [ 3 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 33 Wednesday, June 16, 2004 2:14 PM

D. The Tide Level

The tide level system displays the current tide level using the three icons shown below. The

tide level displayed depends on the date and time set on the base; if an incorrect date or

time is set on the base, the tide level may not display correctly.

High Tide

Mid Tide

Low Tide

E. Indoor and Outdoor Temperature and Humidity

The weather system displays temperature and humidity for both the indoors and the

outdoors. The outdoor temperature and humidity data can be received from the Outdoor

Weather Sensor.

•You can change the temperature format from F to C. For details, see "C. Set the

temperature" on page 16.

•When the base can't receive the data from the outdoor weather sensor for ten minutes,

no data appears on the base display. Check the status of the batteries in the Outdoor

Weather Sensor. Replace the batteries if necessary. (See "Battery replacement and

handling (Outdoor Weather Sensor)" on page 45.)

[ 3 3 ] U S I N G T H E W E A T H E R S T A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 34 Wednesday, June 16, 2004 2:14 PM

Reading the Weather Data from the Handset

You can check the temperature, humidity and weather forecast from the handset.

note

1) Remove the handset from the base.

2) With phone in standby or talk mode, press the

key on the

•If the handset can't

receive any data for

five seconds, an error

tone sounds and the

handset returns to

standby mode.

handset. The display flashes Connecting; the data from the base

appears on the handset display for ten seconds.

3) To return to standby mode or talk mode, press the

key.

•If the base can't

receive weather data

from the Outdoor

Weather Sensor, no

data appears on the

handset display.

•You can receive the

weather data even

while in talk mode.

w w w . u n i d e n . c o m

U S I N G T H E W E A T H E R S T A T I O N [ 3 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 35 Wednesday, June 16, 2004 2:14 PM

Making and Receiving Calls

note

Making a call

1) Remove the handset from the base.

2) Press the talk/flash key.

3) Listen for the dial tone.

4) Dial the number.

Refer to page 19

"Basic Phone Setup" to

turn on the AutoTalk

feature if desired.

1) Remove the handset from the base.

2) Dial the number.

3) Press the talk/flash key.

Receiving a call

1) Remove the handset from the base. (If AutoTalk is on, the phone will automatically

answer the call when you pick it up.)

2) Press the talk/flash key.

1) If the handset is off the base, press the talk/flash key or any number key. (AutoTalk is

on.)

Hanging up

Press the end key or return the handset to the base.

[ 3 5 ] U S I N G Y O U R P H O N E

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 36 Wednesday, June 16, 2004 2:14 PM

Redialing the last dialed number

1) Remove the handset from the base.

2) Press the talk/flash key.

3) Listen for the dial tone.

4) Press the redial/pause key.

1) Remove the handset from the base.

2) Press the redial/pause key.

3) Press the talk/flash key.

Making Calls from Speed Dial Memory

1) Press the mem key. The handset displays your programmed speed

dial number.

2) Enter the number (0 - 9), or press the

/vol/ or

/vol/

key to select the speed dial number you would like to dial.

3) Press the talk/flash key. ^Talkand the number selected appear on

the display. Then the displayed number is dialed.

To cancel speed dialing

Press the end key to cancel speed dialing. The handset returns to standby mode.

Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to

standby mode.

w w w . u n i d e n . c o m

U S I N G Y O U R P H O N E [ 3 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 37 Wednesday, June 16, 2004 2:14 PM

Making a Call from the Caller ID List

You can place a call from the Caller ID list.

note

1) With the phone is standby mode, press the call id/menu key on

the handset. Select the phone number that you want to dial by

pressing the /vol/

or /vol/

key.

You cannot make a call

from the Caller ID list if

your cordless phone is

connected to a private

branch exchange (PBX).

2) To have the phone dial a 1 before the displayed Caller ID number to set a long distance

call, press 1. To have the phone dial the stored area code before the displayed Caller ID

number, press 3.

3) Press the talk/flash key. The displayed phone number dials automatically.

Adjusting the Earpiece Volume

To change the earpiece volume, press the /vol/

or /vol/ key during a call.

Temporarily Mute Ringer

If the handset is off the base while an incoming call is ringing, simply press the end key to

temporarily mute the incoming ring.

The ringer will sound with the next incoming call.

[ 3 7 ] U S I N G Y O U R P H O N E

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 38 Wednesday, June 16, 2004 2:14 PM

Using a Headset

Headset installation

Your phone may be used with an optional headset, the Uniden HS910.

Your phone is ready for hands-free conversations.

(Headset may be purchased by calling the Uniden Parts Department or

visiting the web site. See page 47.)

1) Place the headset on your head so the speaker covers your ear. The

other end of the headset should rest comfortably against the side of

your head above your ear. Do not place the end of the headband

against the other ear.

2) The microphone arm swings over the top of the headset so you can wear the headset on

the left or right ear. Position the flexible arm so the microphone is about 2 inches away

from your mouth.

3) To use the headset, plug the headset plug into the headset jack.

Making calls with the headset

1) Remove the handset from the base and place the headset on your head with the earpiece

over either ear.

2) Press the talk/flash key.

3) Listen for the dial tone from the headset.

4) Dial the number.

w w w . u n i d e n . c o m

U S I N G Y O U R P H O N E [ 3 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 39 Wednesday, June 16, 2004 2:14 PM

1) Remove the handset from the base and place the headset on your head with the earpiece

over either ear.

2) Dial the number.

Receiving calls with the headset

1) Place the headset on your head with the earpiece over either ear and remove the handset

from the base. (If AutoTalk is on, the phone will automatically answer the call when your

pick it up.)

2) Press the talk/flash key.

1) If the handset is off the base, place the headset on your head with the earpiece over

either ear.

2) Press the talk/flash key or any number key. (AutoTalk is on.)

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

[ 3 9 ] U S I N G Y O U R P H O N E

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 40 Wednesday, June 16, 2004 2:14 PM

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can switch-

over to tone dialing after the call connects. This feature is useful

when you need tone dialing to use any automated menu systems,

such as telephone bank tellers, telephone prescription refills,

customer support menus, etc.

note

The UltraClear Plus^TM

true compander circuitry

virtually eliminates

background noise. This

innovative technology,

together with 20

If your phone is set to pulse dialing mode, make your call

normally. Once your call connects, press the /tone/← key. Any

digits you enter from then on will be sent as tone digits. When

this particular call ends, the phone automatically returns to pulse dialing mode.

different channels,

provides you with the

best possible reception

during all your

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise

increases. If you pass the range limits of the base unit, your call will terminate within five

minutes.

conversations.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone's

channel for clear operation. While using your phone, press the delete/channel key. ^Scanning

appears on the display, indicating the phone is changing to another channel. For more

information on interference, refer to "Precautions" on page 53.

w w w . u n i d e n . c o m

U S I N G Y O U R P H O N E [ 4 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 41 Wednesday, June 16, 2004 2:14 PM

Finding a Lost Handset

To locate the handset, press the find handset key on

the base. The handset beeps for 60 seconds.

To cancel paging, press any key on the handset, return

the handset to the base, or press the find handset key

on the base.

Paging is canceled automatically when the phone

receives and incoming call.

Using Call Waiting

If you have Call Waiting service, you can receive calls while on

the line.

1) If a call comes in while you are on the phone, you will hear a

call waiting tone. If you have CIDCW activated, you will see

the name and number of the incoming caller.

2) Press the talk/flash key to accept the waiting call. After a

short pause, you will hear the new caller.

3) To return to the original caller, press the talk/flash key again.

You must subscribe through your local telephone company to receive Call Waiting

service.

[ 4 1 ] U S I N G Y O U R P H O N E

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 42 Wednesday, June 16, 2004 2:14 PM

Voice Mail Waiting Indicator

If you subscribe to voice mail service, you can use your cordless telephone to access your

voice mailbox. The charge/in use LED on the base of your phone flashes whenever you have

messages waiting in your voice mailbox.

note

You must subscribe to

voice mail service from

your telephone company

in order to use this fea-

ture. The voice mail

company will provide

you with the access

number.

Just dial the access number supplied by your voice mail provider to enter your mailbox.

You can program your voice mail access number to a speed dial number.

If the voice mail waiting indicator remains on after you have retrieved your messages, press

and hold the find handset key for 5 seconds. This will reset the indicator.

w w w . u n i d e n . c o m

U S I N G Y O U R P H O N E [ 4 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 43 Wednesday, June 16, 2004 2:14 PM

Changing the Digital Security Code

To protect you against misbilled calls which might result from your phone being activated by

other equipment, the cordless phone provides AutoSecure (which electrically locks your phone

when the handset is in the base) and Random Code digital security which automatically selects

one of over 262,000 digital security codes for the handset and base.

If the handset battery pack is completely discharged or the battery pack is removed, the digital

security code will be lost. If this happens, a new security code is set automatically the next time

the battery pack is charged. In the rare situation that you suspect another cordless telephone

is using the same security code, you can change the code.

1) Remove the handset from the base unit. Press and hold the find handset key on the base.

2) While holding the find handset key, place the handset in the base unit, and leave the

handset in the base for more than 3 seconds. A new random security code is set.

[ 4 3 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 44 Wednesday, June 16, 2004 2:14 PM

Note on Power Sources

Low battery alert (Handset)

When the battery pack is very low and needs to be charged, the phone is

programmed to eliminate functions in order to save power. If the phone is not in

use, Low Battery appears on the LCD and none of the keys will operate.

If the phone is in use, Low Battery flashes and the handset beeps. Complete your

conversation as quickly as possible and return the handset to the base unit for

charging.

Dial mode setting, last number dialed, names and numbers stored in memory

locations and CID list are retained up to 30 minutes while you replace the battery pack.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum

performance, be sure to return the handset to the base unit after a telephone call.

Low battery confirmation (Outdoor Weather Sensor)

To check the battery status of the outdoor weather sensor, remove the cover with a screwdriver or a coin and press

the Check Battery button inside the battery compartment. The battery check LED on the right side of the Check

Battery button shows the current battery status:

• The battery check LED is turned on. → The battery is full.

• The battery check LED is blinking. → The battery is low.

• The battery check LED is turned off. → The battery is empty. Replace with new "AA" size Alkaline batteries.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 4 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 45 Wednesday, June 16, 2004 2:14 PM

Battery replacement and handling (Handset)

When the operating time becomes short even after a battery is recharged, please replace the battery.With normal

usage, your battery should last about one year.

Please contact your place of purchase or the Uniden Parts Department for a replacement battery.

Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden

battery model and Uniden adapter model specifically designated for this product.

Battery replacement and handling (Outdoor Weather Sensor)

When you check the outdoor weather sensor's battery status and the battery check LED is off, the batteries are

empty. Please replace with new "AA" size Alkaline batteries.

Caution

Power Failure

During the period that the power is off, you will not

be able to make or receive calls with the telephone.

• Use only the specified Uniden battery pack (BT-905) for the

handset.

• Use only "AA" size Alkaline batteries for the outdoor weather

sensor. To avoid risk of fire or damage to the unit, do not use

other types of batteries.

• Do not remove the battery from the handset or outdoor

weather sensor to charge it.

• Never throw the battery into a fire, disassemble it, or heat it.

• Do not remove or damage the battery casing.

[ 4 5 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 46 Wednesday, June 16, 2004 2:14 PM

Cleaning the battery charging contacts

To maintain a good charge, clean the charging contacts on the handset

once a month.Dampen a cloth with plain water. Gently rub the damp

cloth over the charging contacts until all visible dirt is removed. Dry the

contacts thoroughly before returning the handset to the base.

Caution

Do not use paint thinner, benzene,

alcohol, or other chemical products.

Doing so may discolor the surface of

the telephone and damage the finish.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 4 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 47 Wednesday, June 16, 2004 2:14 PM

General Information

The phone complies with FCC Parts 15 and 68.

Operating temperature: -10°C to +50°C (+14°F to +122°F) (for Base & Handset)

Operating temperature: -20°C to +60°C (-4°F to +140°F) (for Outdoor Weather Sensor)

AC Adapter Information

AC Adapter part number:

Input Voltage:

AD-314

120V AC 60Hz

9V DC 350 mA

Output Voltage:

Battery Information (for Handset)

Battery part number:

Capacity:

BT-905(for Handset)

600 mAh, 3.6V

Battery Information (for Outdoor Weather Sensor)

Type:

Alkaline Battery "AA" size

•To avoid damage to the phone use only Uniden AD-314 and BT-905 with your phone.

•Use only "AA" size Alkaline batteries for the outdoor weather sensor.

•If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of

time the handset is off the base.

Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the

operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the

battery should last about one year.

A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden

Parts Department (800) 554-3988. Hours are from 7:00 a.m. to 7:00 p.m. Central Time, Monday through Friday, 9:00

a.m. to 5:00 p.m. Saturday, Sunday, and holidays. We can also be reached on the web at www.uniden.com.

Specifications, features, and availability of optional accessories are all subject to change without prior notice.

[ 4 7 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 48 Wednesday, June 16, 2004 2:14 PM

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

Suggestion

The charge/in use LED won't

• Make sure the AC adapter is plugged into the base and wall outlet.

illuminate when the handset is • Make sure the handset is properly seated in the base.

placed in the base.

• Make sure the charging contacts on the handset are clean.

The audio sounds weak and/or

scratchy.

• Move the handset and/or base away from metal objects or appliances and try again.

• Press the delete/channel key in the Talk mode to help eliminate background noise.

• Make sure that the handset is not too far from the base.

Can't make or receive calls.

• Check both ends of the telephone line cord.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Disconnect the AC adapter for a few minutes. Then reconnect it.

• Change the digital security code (see page 43).

• Make sure that the handset is not too far from the base.

• Check the dialing mode used by your telephone company.

• Charge the handset.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 4 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 49 Wednesday, June 16, 2004 2:14 PM

Symptom

Suggestion

The handset doesn't ring or

receive a page.

• The battery pack may be weak. Charge the battery for 15-20 hours.

• The handset may be too far from the base unit.

• Place the base unit away from appliances or metal objects.

• Change the digital security code (see page 43).

• Check the battery pack to ensure there is a secure connection.

• Make sure ringer volume isn't set to turned "off."

• Charge the handset.

Severe noise interference.

• Keep the handset away from microwave ovens, computers, remote control toys, wireless

microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical

appliances.

• Move to another location or turn off the source of interference.

• Make sure that the handset is not too far from the base.

The Caller ID does not display.

• The call was answered before the second ring.

• The call was placed through a switchboard.

• Charge the handset.

• Your Caller ID service may not be active; contact your local telephone service provider.

[ 4 9 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 50 Wednesday, June 16, 2004 2:14 PM

Symptom

Suggestion

Voice Message Indication does

not work.

• Contact your local telephone company to make sure that your telephone receives FSK message

signaling.

• Reset the indicator by pressing and holding the find handset key for 5 seconds.

The outdoor temperature and

humidity doesn't appear on the

base display.

• Check the battery status of the outdoor weather sensor. If the battery is full, switch the Channel

another channel and remove the batteries. Then re-install the batteries.

• Check the battery status of the outdoor weather sensor. If the battery is empty, remove the

batteries. Then install new batteries.

If you still have a problem.

• Call our customer hotline at 1-800-297-1023.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 5 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 51 Wednesday, June 16, 2004 2:14 PM

Liquid Damage

Moisture and liquid can damage your cordless phone and outdoor weather sensor. In case of accidental submersion, please

follow these steps.

Case

Action

If the handset, base or outdoor weather

sensor is exposed to moisture or liquid, but

it only affects the exterior plastic housing.

Wipe off the liquid, and use as normal.

If moisture or liquid has entered the

Handset and Outdoor Weather Sensor:

plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation

in the phone or liquid has entered the

handset battery compartment or vent

openings on the base).

2.Remove the battery pack by disconnecting

3.Leave the battery cover off and the battery pack disconnected for at least 3 days

4.Once the handset is completely dry, reconnect the battery pack and the battery cover.

5.Recharge the handset's battery pack for 20 hours before using again (only for the handset).

Base:

1.Disconnect the AC adapter from the base unit, cutting off electrical power.

2.Disconnect the telephone cord from the base unit.

3.Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to

avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent

damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please send to:

Uniden America Corporation

Parts and Service Division

4700 Amon Carter Blvd.

Ft. Worth, TX 76155

1-800-554-3988, Monday through Friday 7 a.m. to 7 p.m.CST, and

Saturday, Sunday, and holidays 9 a.m. to 5 p.m. CST

[ 5 1 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 52 Wednesday, June 16, 2004 2:14 PM

3. Do not open or mutilate the battery pack. Released electrolyte is

corrosive and may cause damage to the eyes or skin. It may be toxic

if swallowed.

Important Safety Instructions

Precautions!

When using your telephone equipment, these basic safety precautions

should always be followed to reduce the risk of fire, electrical shock, and

injury to persons:

Before you read anything else, please observe the following:

4. Exercise care in handling the battery in order not to short the battery

with conducting materials such as rings, bracelets, and keys. The

battery or conductor may overheat and cause burns.

Warning!

1. Read and understand all instructions.

Uniden America Corporation DOES NOT represent this unit to be

waterproof. To reduce the risk of fire, electrical shock, or damage to the

unit, DO NOT expose this unit to rain or moisture.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Use a dry

cloth for cleaning without liquid or aerosol cleaners.

5. Charge the battery pack provided with or identified for use with this

product only in accordance with the instructions and limitations

specified in the owner's manual provided for this product.

6. Observe proper polarity orientation between the battery pack and

battery charger.

4. Do not use this product near water; for example, near a bathtub, wash

bowl, kitchen sink or laundry tub, in a wet basement, or near a

swimming pool.

Rechargeable Nickel-Metal-Hydride Battery Warning

7. Batteries must be disconnected and removed from the product before

shipment to prevent accidental operation during transport.

Any batteries transported with the product must be separately

secured and cushioned with any exposed terminals covered to prevent

their breakage, leakage, movement within the packaging, or short

circuits. Failure to follow these recommendations for shipment may

result in serious damage and/or personal injury during transport and

may be against the U.S. Department of Transportation (DOT),

International Civil Aviation Administration (ICAO), International Air

Transport Association (IATA), and/or the International Maritime

Organization (IMO) regulations.

•This equipment contains a rechargeable nickel-cadmium battery.

•Cadmium is a chemical known to the State of California to cause cancer.

•The rechargeable nickel-cadmium battery contained in this equipment

may explode if disposed of in a fire.

5. Do not place this product on an unstable cart, stand, or table.

The telephone may fall, causing serious damage to the unit.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation. To protect the product from overheating,

these openings must not be blocked or covered. This product should

never be placed near or over a radiator or heat register. This product

should not be placed in a built-in installation unless proper

ventilation is provided.

•Do not short-circuit the battery.

•Do not charge the rechargeable nickel-cadmium battery used in this

equipment in any charger other than the one designed to charge this

battery as specified in the owner's manual.

Using another charger may damage the battery or cause the battery to

explode.

7. This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be damaged by persons walking on it.

9. Do not overload wall outlets and extension cords, as this can result in

the risk of fire or electrical shock.

10.Never push objects of any kind into this product through cabinet

slots, as they may touch dangerous voltage points or short out parts

that could result in a risk of fire or electric shock. Never spill liquid of

any kind on the product.

8. Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

Rechargeable Nickel-Cadmium

Batteries Must Be Recycled or

Disposed of Properly

SAVE THESE INSTRUCTIONS!

Important Electrical Considerations

Unplug all electrical appliances when you know an electrical storm is

approaching. Lightning can pass through your household wiring and

damage any device connected to it. This phone is no exception.

•Uniden voluntarily participates in an RBRC® industry program to collect

and recycle nickel-cadmium batteries at the end of their useful life,

when taken out of service within the United States.

The RBRC® program provides a convenient alternative to placing used

nickel-cadmium batteries into the trash or municipal waste stream,

which is illegal in some areas.

•Through the RBRC® program, Uniden makes it easy for you to drop off

the used battery at local retailers of replacement nickel-cadmium

batteries. You may also contact your local recycling center for

information on where to return the used battery. Please call 1-800-8-

BATTERY for information on Ni-Cd battery recycling in your area.

Uniden's involvement in this program is part of its commitment to

protecting our environment and conserving natural resources.

•RBRC® is a registered trademark of the Rechargeable Battery Recycling

Corporation.

11.To reduce the risk of electric shock, do not disassemble this product.

Take it to qualified service personnel when service or repair work is

required. Opening or removing covers may expose you to dangerous

voltages or other risks. Incorrect reassembly can cause electric shock

when the appliance is subsequently used.

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by

Uniden, or operation of this product in any way other than as detailed by

the owner's manual, could void your authority to operate this product.

Your telephone compiles with Part 68 of FCC Rules. You must, upon

request, provide the FCC registration number and the REN to your

telephone company. Both numbers are on the base unit.

12.Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. When the power supply cord is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

Note:

You must not connect your phone to:

• coin-operated systems

• most electronic key telephone systems

D. If the product does not operate normally when following the

operating instructions. (Adjust only those controls that are

covered by the operating instructions. Improper adjustment of

other controls may result in damage and will often require

extensive repair work by a qualified technician.)

This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation. Privacy of

communications may not be ensured when using this phone.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance.

13. Do not use the telephone to report a gas leak in the vicinity of the leak.

Range

Additional Battery Safety Precautions

Uniden works to reduce lead content in our PVC coated cords in our

product and accessories.

Your new phone is designed to achieve the maximum possible range by

transmitting and receiving according to the highest specifications set forth by

the FCC. We have rated this phone to operate at a maximum distance with the

qualification that the range depends upon the environment in which the

telephone is used. Many factors limit range, and it would be impossible to

include all the variables in our rating. The Maximum Range rating of this phone

is meant to be used as a means of comparison against other range claims.

Caution! To reduce the risk of fire or injury to persons by the battery,

read and follow these instructions:

1. Use only the Uniden power cord and batteries specified in the owner's manual.

2. Do not dispose of the battery pack in a fire. The cell may explode.

Check with local codes for possible special disposal instructions.

WARNING: The cords on this products and/or accessories contain lead, a

chemical known to the State of California to cause birth defects or other

reproductive harm. Wash hands after handling.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 5 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 53 Wednesday, June 16, 2004 2:14 PM

Telephone Line Problems

Installation Considerations

Selecting a Location

One Year Limited Warranty

The FCC has granted the telephone company the right to disconnect

service in the event that your phone causes problems on the telephone

line. Also, the telephone company may make changes in facilities and

services which may affect the operation of your unit. However, your

telephone company must give adequate notice in writing prior to such

actions to allow you time for making necessary arrangements to continue

uninterrupted service.

Important: Evidence of original purchase is required for warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")

(Base and Handset)

ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original

retail owner, this Uniden Product to be free from defects in materials and

craftsmanship with only the limitations or exclusions set out below.

Before choosing a location for your new phone, there are some important

guidelines you should consider:

• The location should be close to both a phone jack and continuous

power outlet. (A continuous power outlet is an AC outlet which does

not have a switch to interrupt its power.)

WARRANTY DURATION: This warranty to the original user shall terminate

and be of no further effect 12 months after the date of original retail

sale. The warranty is invalid if the Product is (A)

damaged or not maintained as reasonable or necessary, (B) modified,

altered, or used as part of any conversion kits, subassemblies, or any

configurations not sold by Uniden, (C) improperly installed,

(D) serviced or repaired by someone other than an authorized Uniden

service center for a defect or malfunction covered by this warranty, (E)

used in any conjunction with equipment or parts or as part of any system

not manufactured by Uniden, or (F) installed or programmed by anyone

other than as detailed by the owner's manual for this product.

If you are having trouble with your telephone service, you must first

disconnect your phone to determine if it is the cause of your problem. If

you determine that it is the cause, you must leave it disconnected until

the trouble has been corrected.

• Keep the base and handset away from sources of electrical noise such

as motors or fluorescent lighting.

• The base can be placed on a desk or tabletop or mounted on a standard

telephone wall plate.

Radio Interference

• You should charge your new phone for 15-20 hours before completing

the installation or using the handset.

Radio interference may occasionally cause buzzing and humming in your

cordless handset, or clicking noises in the base. This interference is

caused by external sources such as TV, refrigerator, vacuum cleaner,

fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.

If these noises continue and are too distracting, please check around

your home to see what appliances may be causing the problem.

In addition, we recommend that the base not be plugged into a circuit

that also powers a major appliance because of the potential for

interference. Be certain that antenna on the unit is fully extended.

In the unlikely event that you consistently hear other voices or

distracting transmissions on your phone, you may be receiving radio

signals from another cordless telephone or other source of interference.

If you cannot eliminate this type of interference, you need to change to

a different channel.

(Outdoor Weather Sensor)

• Avoid heat sources and direct sunlight.

• Set up the outdoor weather sensor at least 60 inches from the ground.

• Set up the outdoor weather sensor where it will receive proper

ventilation.

STATEMENT OF REMEDY: In the event that the product does not conform

to this warranty at any time while this warranty is in effect, warrantor

will either, at its option, repair or replace the defective unit and return it

to you without charge for parts, service, or any other cost (except

shipping and handling) incurred by warrantor or its representatives in

connection with the performance of this warranty. Warrantor, at its

option, may replace the unit with a new or refurbished unit. THE LIMITED

WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY

PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL

OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,

IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT

LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR

PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or

limitation of incidental or consequential damages so the above limitation

or exclusion may not apply to you.

• The unit require the proper space for ventilation

•

Do not place the outdoor weather sensor where it will be exposed to rain or snow.

Telephone Line Outlets

There are two types of phone outlets:

Modular Jack

Most phone equipment available now uses modular jacks. Phone cords are

fitted with a molded plastic connector which plugs into this type of jack.

If you do not have modular phone jacks, contact your local telephone

company for information about their installation.

Finally, it should be noted that some cordless telephones operate at

frequencies that may cause interference to nearby TVs and VCRs.

To minimize or prevent such interference, the base of the cordless

telephone should not be placed near or on top of a TV or VCR.

If interference is experienced, moving the cordless telephone farther

away from the TV or VCR will often reduce or eliminate the interference.

Hardwired Jack

Some equipment is wired directly to a phone jack, and these types of

installations require a modular jack converter. This type of installation is

not difficult; however, you should contact your Uniden telephone dealer

or a telephone supply store for advice about the proper adapter or

converter for your particular situation.

More than One Cordless Telephone

If you want to use more than one cordless telephone in your home, they

must operate on different channels. Press the delete/channel key to

select a channel that provides the clearest communication.

LEGAL REMEDIES: This warranty gives you specific legal rights, and you

may also have other rights which vary from state to state. This warranty

is void outside the United States of America and Canada.

Connecting the Telephone Cords

Cordless Telephone Privacy

Consider these safety guidelines before connecting the telephone cords:

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after

following the instructions in the owner's manual you are certain that the

Product is defective, pack the Product carefully (preferably in its original

packaging). The Product should include all parts and accessories

originally packaged with the Product. Include evidence of original

purchase and a note describing the defect that has caused you to return

it. The Product should be shipped freight prepaid, by traceable means, to

warrantor at:

Cordless telephones are radio devices. Communications between the

handset and base of your cordless telephone are accomplished by means

of radio waves which are broadcast over the open airways. Because of the

inherent physical properties of radio waves, your communications can be

received by radio receiving devices other than your own cordless

telephone unit. Consequently, any communications using your cordless

telephone may not be private.

Caution!

• Never install telephone wiring during a lightning storm.

• Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected.

• Use caution when installing or modifying telephone lines.

Applying Power to the Base

This phone requires an AC outlet, without a switch to interrupt power,

and the included AC adapter. To relieve strain on the DC plug when the

phone is placed on a desk or table, wrap the power cord around the strain

relief notch on the back of the base.

Uniden America Corporation

Parts and Service Division

4700 Amon Carter Blvd. Fort Worth, TX 76155

(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday

or visit our website at www.uniden.com

NOTE:

Place the power cord so that it does not create a trip hazard, or where

it could become chafed and create a fire or other electrical hazards.

[ 5 3 ] A D D I T I O N A L I N F O R M A T I O N

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 54 Wednesday, June 16, 2004 2:14 PM

I.C. Notice

TERMINAL EQUIPMENT

NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is

confirmed by the registration number. The abbreviation, IC, before the registration number signifies that

registration was performed based on a Declaration of Conformity indicating that Industry Canada technical

specifications were met. It does not imply that Industry Canada approved the equipment.

NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The

REN assigned to each terminal equipment provides an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of

all the devices does not exceed five.

RADIO EQUIPMENT

The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were

met.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired

operation of the device. "Privacy of communications may not be ensured when using this telephone".

w w w . u n i d e n . c o m

ADDITIONAL INFORMATION [ 5 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 55 Wednesday, June 16, 2004 2:14 PM

Channel . . . . . . . . . . . . . . . . .40

Ringer tone . . . . . . . . . . . . . . 22

Index

Charging the handset battery

pack . . . . . . . . . . . . . . . . . . . .10

CIDCW . . . . . . . . . . . . . . . . . .19

Cleaning contacts . . . . . . . . . . .46

Connect the base unit . . . . . . . . .9

Controls and functions . . . . . . .3, 4

Set the weather display . . . . . . 30

Snooze feature . . . . . . . . . . . . 18

Speed dial memory . . . . . . . . . . 23

AC adapter information . . . . . . . 47

Access the weather data from the

handset . . . . . . . . . . . . . . . . . 34

Alarm clock . . . . . . . . . . . . . . 17

AutoTalk . . . . . . . . . . . . . . . . 19

T, U

Tone dialing switch-over . . . . . . 40

Traveling out-of-range . . . . . . . 40

Troubleshooting . . . . . . . . . . . 48

Dial mode . . . . . . . . . . . . . . . .21

Digital security code . . . . . . . . .43

Base display icons . . . . . . . . . . 30

Basic phone setup . . . . . . . . . . 19

Battery pack (handset)

V, W, X, Y, Z

E, F, G, H, I, J, K, L

Voice mail waiting indicator . . . 42

Wall mounting the base . . . . . . 12

Wall mounting the outdoor

Earpiece volume . . . . . . . . . . . .37

Find handset . . . . . . . . . . . . . .41

General information . . . . . . . . .47

Headset installation . . . . . . . . .38

I.C. Notice . . . . . . . . . . . . . . .54

Installing the phone . . . . . . . . . .6

Interference . . . . . . . . . . . . . .53

Language . . . . . . . . . . . . . . . .21

Liquid damage . . . . . . . . . . . . .51

Information . . . . . . . . . . . . . 47

Installing . . . . . . . . . . . . . . . 8

Replacement and handling . . . 45

Battery pack

weather sensor . . . . . . . . . . . . 11

Warranty . . . . . . . . . . . . . . . . 53

Weather display . . . . . . . . . . . . 30

(outdoor weather sensor)

Information . . . . . . . . . . . . . 47

Installing . . . . . . . . . . . . . . 10

Replacement and handling . . . 45

Beltclip installation . . . . . . . . . 39

M, N, O, P, Q

Making a call . . . . . . . . . . . . . .35

Mount the outdoor weather

Call waiting . . . . . . . . . . . . . . 41

Caller ID service . . . . . . . . . . . 27

Call waiting . . . . . . . . . . . . . 41

Deleting . . . . . . . . . . . . . . . 29

Making a call . . . . . . . . . . . . 35

Viewing . . . . . . . . . . . . . . . 28

sensor . . . . . . . . . . . . . . . . . .11

Precautions . . . . . . . . . . . . . . .52

Receiving a call . . . . . . . . . . . .35

Redial . . . . . . . . . . . . . . . . . .36

[ 5 5 ]

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 56 Wednesday, June 16, 2004 2:14 PM

Memory List

MEMORY LOCATION MEMO

Name Phone Number

MEMORY LOCATION MEMO

Name Phone Number

Memory

Location

Memory

Location

MEMORY LOCATION MEMO

Name Phone Number

MEMORY LOCATION MEMO

Name Phone Number

Memory

Location

Memory

Location

[ 5 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 57 Wednesday, June 16, 2004 2:14 PM

Memo

w w w . u n i d e n . c o m

[ 5 7 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

UP033BH_EXI7246C.book Page 58 Wednesday, June 16, 2004 2:14 PM

At Uniden, we'll take care of you!

^{If you need any assistance with this product, please call our Customer Hotline at}1-800-297-1023

or visit our web site at www.uniden.com

PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.

Our Uniden representatives will be happy to help you with any matters regarding

the operation of this unit, available accessories, or any other related matters.

Thank you for purchasing a Uniden product.

Hours: M-F 8:00 AM to 5:00 PM CST.

Accessibility

For information on the accessibility features of this product, please call

1-800-874-9314 (V/TTY)

May be covered under one or more of the following U.S. patents:

4,595,795 4,797,916 5,381,460 5,426,690 5,434,905 5,491,745

5,493,605 5,533,010 5,574,727 5,581,598 5,650,790 5,660,269

5,661,780 5,663,981 5,671,248 5,696,471 5,717,312 5,732,355

5,754,407 5,758,289 5,768,345 5,787,356 5,794,152 5,801,466

5,825,161 5,864,619 5,893,034 5,912,968 5,915,227 5,929,598

5,930,720 5,960,358 5,987,330 6,044,281 6,070,082 6,125,277

6,253,088 6,314,278 6,418,209 6,618,015 6,671,315 6,714,630

For my info. The numbers will be revised after checking the latest patent numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

THANK YOU FOR BUYING A UNIDEN PRODUCT.

UCZZ01435EZ

Download from Www.Somanuals.com. All Manuals Search And Download.

Teledyne Car Video System 460L User Manual
Toshiba Laptop 2545 Series User Manual
Toshiba Personal Computer L300D User Manual
Tripp Lite Surge Protector DB15 User Manual
Tyco Electronics Flat Panel Television E773282 User Manual
Uniden GPS Receiver GNS 8365 User Manual
Uniden Radio GMR648 2CK User Manual
VistaQuest Camcorder VQ DV7 User Manual
Vizio TV Antenna E420i B0 User Manual
Watlow Electric Electric Heater Responsive Heater User Manual