Uniden Cordless Telephone DXAI4588 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome

Congratulations on your purchase of the Uniden dual-handset cordless telephone. This cordless phone is designed

for reliability, long life, and outstanding performance.

Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.

manual.may.differ.from.the.actual.unit..The.color.of.your.cordless.telephone.may.vary.

Uniden^®is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer

service assistance or if you have any questions about how Uniden’s products can accommodate

persons with disabilities, please call the accessibility voice/TTY line:

ꢀ-800-874-93ꢀ4.

Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under

the "Accessibility" link. If your call is received outside of our business hours, you can leave us a message and we will

call you back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Terminology

Base

The main part of the phone that connects to your phone line and lets you make and receive calls.

Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line.

Caller ID is available from your telephone provider. With this service, you can see the name and number

of incoming callers.

CID

Caller ID on Call Waiting is available from your telephone provider. With this service, you can see

incoming caller information while on another call.

CIDCW

Handset A cordless handset that can be placed anywhere in your home or ofﬁce where AC power is available.

The handset may be sitting on the cradle or out of the cradle, but is NOT in use.

Standby

[talk/ﬂash] has not been pressed and there is no dial tone.

When a dial tone has been enabled allowing the user to dial and carry on a conversation with an outside

party.

Talk

Manual.Conventions

This manual uses several different type styles to help you distinguish between different parts of the phone:

• lower.case.bold text with "[ ]" indicates a key or button on the phone

• ALL CAPITALS indicates text on the display, such as menu options, prompts, and conﬁrmation messages

• lower.case.bold text indicates a status light on the phone base

Download from Www.Somanuals.com. All Manuals Search And Download.

Product.Overview

Main.Phone.Features

• 2.4 GHz Extended Range Technology

• Dual-Handset System

• Last Number Redial

• Tone/Pulse Dialing

(Extra Handset & Charger Included)

• Call Transfer from Handset to Handset

• Caller ID/Caller ID on Call Waiting

• 3-Line Backlit LCD

• Page/Find Handset Key

• Earpiece/Ringer Volume Controls

• Mute or Turn Ringer Off

• Hearing Aid Compatible

• Trilingual Menu Displays (English, Spanish, or French) • 20-Channel Auto Scan

• 30 Caller ID Memory

• Desk or Wall Mountable

• ꢀ0 Number Memory Dialing

Answering.Machine.Features

• Digital Tapeless Recording

• Up to ꢀ3 minutes of Recording Time

• Call Screening

• Personal or Pre-recorded Outgoing Messages

• Voice Prompts (English, Spanish, or French)

• Time and Day Announcement

• Remote Message Retrieval

• Toll Saver

• Conversation Recording

• Voice Memo

• Selectable Ringer Options (High, Low or Off)

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls.and.Functions

Handsets

ꢀ. Handset antenna

2. Handset battery compartment

3. Handset earpiece

4. LCD display

5. [vol/ / / ]

(volume & ringer up/down) key

6. [cid/menu] key

7. [ /tone/ ] (left cursor) key

8. [redial/pause] key

9. [select/channel] key

ꢀ0. [memory] key

ꢀꢀ. [end] key

ꢀ2. [talk/ﬂash] key

ꢀ3. [#/ ] (right cursor) key

ꢀ4. [delete/transfer] key

ꢀ5. Handset ringer speaker

ꢀ6. Handset microphone

ꢀ7. Handset charging contacts

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ8. Base speaker

Main.Base.Unit

ꢀ9. Base charging contacts

20. [menu/clock] key

2ꢀ. [set] key

20 21 22 23 24

22. Message counter LED

23. Main Base antenna

24. charge/in.use LED

25. [vol/select/ / ]

(volume/select up/down) key

26. [

] (play/stop) key

27. [ ] (delete) key

36 37

28. [ ] (skip/fast forward) key

29. [ ] (answer on/off) key

30. [ ] (repeat/rewind) key

3ꢀ. Mic (microphone)

32. [ringer] key

29 30 31 32 33 34 35

Extra.Charging.Cradle

33. [memo] key

34. [ﬁnd handset] key

35. [greet] key

36. Base DC.IN.9V jack

37. TEL.LINE jack

38. Charging contacts

39. (charge) LED

40. Charging cradle DC.IN.9V jack

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing.the.Phone

Choosing.the.Best.Location

Before choosing a location for your new phone, here are some important guidelines you should consider:

Avoid heat sources, such as radiators,

air ducts, and sunlight

Avoid noise sources such as a window by

a street with heavy trafﬁc

Avoid television sets and other

electronic equipment

Avoid microwave ovens

Avoid excessive moisture,

extremely low temperatures, dust,

mechanical vibration, or shock

Choose a central location

Avoid personal computers

Avoid other cordless telephones

• The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a

switch).

• The base and each handset should be kept away from sources of electrical noise such as motors, microwave

ovens, and ﬂuorescent lighting.

• The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the

base as high as possible.

• The base should be placed in an open area for optimum range and reception.

• If your home has specially wired alarm equipment connected to the telephone line, be sure that installing

the system does not disable your alarm equipment. If you have questions about what will disable your alarm

equipment, contact your telephone company or a qualiﬁed installer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing.the.Rechargeable.Battery.Packs.into.the.Handsets

Each handset is powered by a rechargeable battery pack. Once installed, the battery

charges automatically when the handset is placed in the base or charging cradle.

To install the rechargeable battery pack:

1) Press down on the handset battery case cover (use the ﬁnger indention for a better

grip) and slide the cover downward to remove.

2) Plug the battery pack connector (red & black wires) into the small jack inside the

battery compartment. (The connector notches ﬁt into the grooves of the jack only

one-way.) Match the wire colors to the polarity label in the battery compartment,

connect the battery, and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If

the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back in the handset by sliding it upwards until it clicks

into place.

Note:.Use.only.the.Uniden.(BT-1006).rechargeable.battery.pack.supplied.

with.your.phone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing.the.Base.Unit.and.Charging.Cradle

ꢀ) Connect each AC adapter to the DC.IN.9V jack and to each

standard ꢀ20V AC wall outlet.

Note:.

•..Use.only.the.supplied.AD-314.AC.adapter.for.the.base.

unit.and.AD-310.or.AD-1010.for.the.charging.cradle..

Do.not.use.any.other.AC.adapter.

•..Do.not.place.the.power.cord.where.it.creates.a.trip.

hazard.or.where.it.could.become.chafed.and.create.a.

ﬁre or electrical hazard.

2) Charge the handsets by placing one handset in the base unit and

the other in the charging cradle with the keypad facing forward.

Download from Www.Somanuals.com. All Manuals Search And Download.

3) Make sure that the charge/in.use LED and LED illuminate. If the

LED does not illuminate, check to see that the AC adapter is plugged

in and that the handset makes good contact with the cradle’s charging

contacts.

Note:.

•..Connect.the.AC.adapter.to.a.continuous.power.supply.(not.

controlled.by.a.wall.switch).

•..Place.each.cradle.close.to.the.AC.outlet.to.avoid.long.

extension.cords.

•. Charge.your.handsets.at.least.15.-.20.hours.before.plugging.

into.the.phone.line..

4) Once the handset battery packs are fully charged, connect the telephone

line cord to the TEL.LINE jack and a telephone outlet. If your telephone

outlet isn't modular, contact your telephone company for assistance.

Modular

ꢀ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Mounting.the.Base.Unit.on.a.Wall

Standard.wall.plate.mounting

This phone can be mounted on any standard wall plate.

ꢀ) Snap the wall mount adapter into the notches on the base top.

2) Plug the AC adapter to the DC.IN.9V jack.

3) Plug the AC adapter into a standard ꢀ20V AC wall outlet.

4) Plug the telephone line cord into the TEL.LINE jack.

5) Route the telephone line cord through the groove as shown.

6) Plug the telephone line cord into the telephone outlet.

7) Align the mounting slots on the base with the mounting posts on the wall.

Then push in and down until the phone is ﬁrmly seated.

_{Download from Www.Somanuals.co}ꢀ_mꢀ_{. All Manuals Search And Download.}

Direct.wall.mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before

doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a

hazard when inserting screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of the base and handset.

• Use #ꢀ0 screws (minimum length of ꢀ-3/8 inches) with anchoring devices suitable for the wall

material where the base unit will be placed.

ꢀ) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-ꢀ5/ꢀ6

inches apart. Allow about ꢀ/8 of an inch between the wall and screw heads for mounting the

phone.

2) Refer to steps ꢀ through 7 on page ꢀꢀ to mount the telephone.

ꢀ2

Download from Www.Somanuals.com. All Manuals Search And Download.

Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge

in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST

also be registered to the base unit before use.

To register the extra handset:

ꢀ) Be sure both handsets are fully charged.

2) Pick up the handset from the charging cradle, and place it in the base unit. The charge/in.use LED light on the

base unit will begin to ﬂash, indicating that the registration is taking place.

3) Wait for at least 5 seconds, then pick up the handset from the base unit.

4) Press [talk/ﬂash] on one handset. If TALK appears on the display, the handset is registered, press [end].

Then try with another handset. If each handset displays TALK, the handset has been registered to the base.

Otherwise, return to step ꢀ and try again.

5) Once both handsets are registered, it doesn’t matter which handset is placed in the base unit or the charging

cradle.

Note:.

•..When.you.charge.the.handsets,.Caller.ID.summary.screen.and.the.name.of.

HS1

the.handset.appears..Following.display.is.the.example.of.handset.No.1.(HS1).

•. The.charging.cradle.can.be.used.to.charge.any.handset.

Total:00

ꢀ3

Download from Www.Somanuals.com. All Manuals Search And Download.

When.to.Re-register.Handsets

In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow

registration steps outlined on page ꢀ3.

Re-registration is required in the following scenarios:

ꢀ) You’ll need to re-register both handsets (follow steps on page ꢀ3) each time the digital security code is changed.

(Refer to page 47 for details regarding the Digital Security Code.)

2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if

the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same

registration process on page ꢀ3.

3) If any handset’s battery becomes very low, the handset must be recharged for ꢀ5 - 20 hours and re-registered to

the main base unit.

4) In any circumstance in which you experience difﬁculty connecting to the main base to place or receive calls, the

handset should be re-registered.

Note:.Make.sure.to.return.the.handsets.to.the.cradles.after.each.phone.call.

ꢀ4

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic.Setup

There are ﬁve basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code,

Dial Mode and Language.

CIDCW and Dial Mode options can only be set by using Handset ꢀ.

If you try to set by using other handset, you will not see these options listed on the LCD screen. (You can easily

identify Handset ꢀ shows as HS1 will be seen in the display while the phone is charging.)

AutoTalk, Area Code and Language options can be set by using any handset.

Activating.AutoTalk

AutoTalk will allow you to answer the phone simply by removing the handset from the cradle. You do not have to

press a key to answer the incoming call.

To activate:

ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

2) Press [select/channel] to turn AutoTalk on.

3) Press [end] or return the handset to the charging cradle to complete the setting. The

handset returns to standby.

ꢀ5

Download from Www.Somanuals.com. All Manuals Search And Download.

Activating.Caller.ID.on.Call.Waiting.(HS1.only)

Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call

Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must

subscribe to Caller ID service through your local telephone provider to use this feature.

ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

2) Press [vol/ / ] to move the pointer to select CIDCW.

3) Press [select/channel] to toggle and turn on Caller ID on Call Waiting.

4) Press [end] and return the handset to the base unit to complete the setting. The handset

returns to standby.

Note:.To.enable.the.setting.change.of.CIDCW,.you.need.to.return.the.handset.

to.the.base.unit.when.you.complete.the.setting.

Programming.Your.Area.Code

In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of ꢀ0).

If this is the case in your area, you can program your local area code in your phone. Programming your area code

will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without

modifying the number before dialing. If you get a call from outside your area code, you'll see all ꢀ0 digits.

To program your area code:

ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

ꢀ6

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press [vol/ / ] to move the pointer to select AREA CODE.

3) Press [select/channel]. If an area code was already stored, the phone will display it.

4) Use the number keys ( [0] – [9] ) to enter the 3-digit area code.

If you make an error, use [delete/transfer] to backspace.

5) Press [select/channel]. A conﬁrmation tone sounds.

6) Press [end] or return the handset to the charging cradle to complete the setting. The

handset returns to standby.

Choosing.the.Dialing.Mode.(HS1.only)

Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These

days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing

by default.

If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell:

try making a call. If your call connects, your phone's setting is ﬁne. If not, you may need to change the dial mode.

To change the dial mode:

ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

ꢀ7

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press [vol/ / ] to move the pointer to select DIAL.

3) Press [select/channel] to set the phone to pulse dialing.

4) Press [end] and return the handset to the base unit to complete the setting. The handset

returns to standby.

Note:.

•. If.your.phone.system.requires.pulse.dialing.and.you.need.to.send.the.DTMF.tones.during.a.call,.

you.can.temporarily.switch.over.to.tone.dialing..(Refer.to."Tone.Dialing.Switch-over".on.page.28.)

•. To.enable.the.setting.change.of.Dialing.Mode,.you.need.to.return.the.handset.to.the.base.unit.

when.you.complete.the.setting.

Setting.the.Language

You can change the language the handset menu displays. Choose from English, French, or Spanish.

To change the language setting:

ꢀ) When the phone is in standby, Press and hold [cid/menu]. The following screen appears.

2) Press [vol/ / ] to move the pointer to select LANGUAGE.

3) Press [select/channel] to select ENG, FR. or ESP.

4) Press [end] or return the handset to the charging cradle to complete the setting. The

handset returns to standby.

ꢀ8

Download from Www.Somanuals.com. All Manuals Search And Download.

Using.the.Speed.Dial.Memory

Your cordless phone allows you to store up to ꢀ0 names and numbers in each handset. You can dial these numbers

with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number

(up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example

is a frequently reﬁlled prescription number. Store your pharmacy phone number in one speed dial and your most

frequently reﬁlled prescription number as another speed dial. To use, once you ring your pharmacy's automated

prescription line, simply press [memory] and the speed dial number where you stored your prescription number and

press [select/channel].

Note:.When.editing.the.speed.dial.memory,.you.must.press.a.key.within.30.seconds.or.the.phone.

will.return.to.standby..If.you.return.the.handset.to.the.cradle,.the.phone.will.return.to.standby.also.

Storing.a.Name.and.Number.in.Memory

ꢀ) With the phone in standby, press [memory].

2) Enter [0] - [9] or use [vol/ / ] and [vol/ / ] to select the speed dial location where you

would like to store this entry, and then press [select/channel] twice.

3) STORE NAME appears and a cursor ﬂashes indicating that the phone is ready for the

name to be entered.

Note:.If.the.selected.speed.dial.number.is.already.assigned,.the.Edit.screen.

appears..You.can.select.EDIT.MEMORY.to.edit.this.entry,.select.DELETE.

MEMORY.to.erase.this.entry,.or.select.GO.BACK.to.choose.another.speed.dial.

number.

ꢀ9

Download from Www.Somanuals.com. All Manuals Search And Download.

4) Enter a name according to the instructions below, then press [select/channel]. If no name is required, go to step

• The name can be up to ꢀ3 characters.

• Use [ /tone/ ] and [#/ ] to move the cursor to the desired location.

• Press [delete/transfer] to delete characters as needed or press and hold to delete all characters.

Refer to the letters on the number keys to select the desired characters.

With each press of a numeric key, the displayed character appears in the following order: upper case letters ﬁrst,

lower case letters next and ﬁnally the number corresponding to the key.

Note:.If.the.next.character.uses.the.same.number.key,.you.must.press.[#/ ] to move the cursor over.

Otherwise.the.next.time.you.press.the.number.key,.it.changes.the.character.that.was.previously.set.

For example, to enter Movies.

ꢀ) Press [6] once. Then press [#/ ] to

move the cursor to the right.

2) Press [6] six times.

Number of times key is pressed

keys

2abc

3def

3) Press [8] six times.

4ghi

5jkl

4) Press [4] six times.

5) Press [3] ﬁve times.

6) Press [7] eight times.

6mno

7pqrs

8tuv

9wxyz

0^oper

Download from Www.Somanuals.com. All Manuals Search And Download.

If.you.make.a.mistake.while.entering.a.name

Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character.

Press [delete/transfer] to erase the wrong character. Then enter the correct character. To delete all characters,

press and hold [delete/transfer].

5) STORE NUMBER is displayed. The cursor ﬂashes indicating that the phone is ready for

the number to be entered.

6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you

need the phone to pause during the dialing sequence, press [redial/pause] to insert a

two-second delay between the numbers. You can enter multiple pauses to increase the

delay. Each pause counts as a digit. The display shows a P for every pause.

7) Press [memory]. You will hear a conﬁrmation tone, and the following screen appears.

Memory storage is complete.

8) After about 2 seconds, the following screen displays all the speed dial memory entries.

9) Press [end] to exit memory setup mode. The phone returns to standby.

Note:.When.storing.numbers.into.memory,.if.the.handset.is.idle.(i.e.,.no.key.is.pressed).for.more.

than.30.seconds,.it.will.beep.rapidly,.and.the.phone.will.return.to.standby.

2ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing.Caller.ID.in.Speed.Dial.Memory

Caller ID names and numbers shown in the Caller ID list can be stored in speed dial memory.

To store a caller id name/number to memory:

ꢀ) With the phone in standby, press [cid/menu]. Select the phone number to be stored from

the Caller ID list by pressing [vol/ / ] or [vol/ / ].

2) Press [memory].

3) Enter a number ( [0] – [9] ) or press [vol/ / ] or [vol/ / ] to select the memory location

to be stored.

4) Press [select/channel]. You hear a conﬁrmation tone, and the number is stored in

memory. The display returns to the Caller ID list.

Note:

•. If.a.number.has.already.been.stored.in.the.selected.memory.number.

location, a conﬁrmation screen is displayed. To overwrite, press [vol/ / ] to

YES and press [select/channel]. The display returns to the Caller ID list.

•. You.cannot.store.a.Caller.ID.message.if.no.phone.number.appears.in.the.message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using.Your.Phone

Making.and.Receiving.Calls

Handset.on.the.cradle

Handset.off.the.cradle

ꢀ) Press [talk/ﬂash].

ꢀ) Pick up the handset from the cradle.

2) Press [talk/ﬂash].

3) Listen for the dial tone.

4) Dial the number.

2) Listen for the dial tone.

3) Dial the number.

Making.a.call

ꢀ) Pick up the handset from the cradle.

2) Dial the number. Then press [talk/ﬂash].

Dial the number. Then press [talk/ﬂash].

ꢀ) Pick up the handset from the cradle. (If

AutoTalk is on, the phone will answer the

call when you pick it up.)

Press [talk/ﬂash] (or [ /tone/ ], [#/ ] or any

number key if AutoTalk is on).

Receiving.a.call

Hanging.up

2) Press [talk/ﬂash].

Press [end] or return the handset to the cradle.

Note:.To.turn.on.the.AutoTalk.feature,.see."Activating.AutoTalk".on.page.15.

Making.a.Call.from.Speed.Dial.Memory

To make a call from speed dial memory:

ꢀ) With the phone in standby, press [memory]. The handset displays your programmed

speed dial number.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Enter the number ( [0] – [9] ), or press [vol/ / ] or [vol/ / ] to select the speed dial number you would like to

dial.

3) Press [talk/ﬂash]. CONNECTING changes to TALK, and the volume setting and the

number selected appear on the display. Then the displayed number is dialed.

Note: You can also press [talk/ﬂash] before you access the speed dial memory.

When you come to the phone number you want to dial, press [select/channel].

To.cancel.speed.dialing

Press [end] to return to standby, or press [memory] to return to the call. (During a call, don’t press [end], or the call

will be disconnected.) Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the speed dialing will be

cancelled.

Making.a.Call.from.the.Caller.ID.List

You can place a call directly from the Caller ID list.

ꢀ) Press [cid/menu] in standby. Use [vol/ / ] or [vol/ / ] to select the phone number that

you want to dial.

2) To have the phone dial a "ꢀ" before the displayed Caller ID number, press [1]. To have the

phone dial the stored area code before the displayed Caller ID number, press [3].

3) Press [talk/ﬂash]. The displayed phone number dials automatically.

Note:.

• You can also press [talk/ﬂash] before you access the Caller ID list. When you come to the phone

number you want to dial, press [select/channel].

•..You.cannot.make.a.call.from.the.Caller.ID.list.if.your.cordless.telephone.is.connected.to.a.private.

branch.exchange.(PBX).

Download from Www.Somanuals.com. All Manuals Search And Download.

Transferring.a.Call

Your cordless phone allows you to transfer outside calls from one handset to another. Only one handset at a time

can talk with an outside caller. While one handset is in use, the other cannot go off hook to listen to conversations or

make an outgoing call.

To.transfer.a.call

ꢀ) During a call, press [delete/transfer]. The call will automatically be placed on hold and the

Hold

Transfer Call

transfer tone sounds.

2) When the other handset receives the call, the transfer tone stops.

To cancel the transfer and return to the caller, press [delete/transfer] or [talk/ﬂash] on the handset.

To.receive.a.transfer.call

Pick up the handset from the cradle (when AutoTalk is set to on), or pick up the handset

and press [talk/ﬂash] to answer the transferred call. Additionally, you can also answer the

Transfer Call

transferred call by pressing any number key, [ /tone/ ] or [#/ ] (when AutoTalk is set to on).

Note:.If.you.transfer.a.call.and.it.is.not.picked.up.after.5.minutes,.the.call.will.be.disconnected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Redialing.the.Last.Dialed.Number

ꢀ) Pick up the handset from the cradle.

2) Press [talk/ﬂash].

ꢀ) Pick up the handset from the cradle.

2) Press [redial/pause].

3) Press [talk/ﬂash].

3) Listen for the dial tone.

4) Press [redial/pause].

Selecting.the.Ring.Tone.and.Volume

Your phone has ﬁve different ringer tone/volume combinations you can choose from.

To select the ringer:

ꢀ) With the phone in standby, press [vol/ / ] or [vol/ / ].

2) The phone will sound the different ring tones at different volumes. To turn the ringer

off, select RINGER OFF.

3) When the phone sounds the ring tone and volume you wish to use, press [end].

Temporarily.Mute.Ringer

If the handset is off the base while an incoming call is ringing, simply press [end] to mute

the incoming ring. The ringer will sound with the next incoming call.

Note:.You.can.only.mute.the.handset.ringer.if.the.handset.is.off.the.base.when.the.phone.starts.

ringing.

Adjusting.the.Earpiece.Volume

To change the earpiece volume, press [vol/ / ] or [vol/ / ] during a call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using.Call.Waiting

If you subscribe to Call Waiting through your local telephone company, you can receive calls while on the line.

To answer a call waiting call:

ꢀ) While on the phone, you will hear a call waiting tone. (If you have CIDCW service

activated, you will see the name and number of the incoming caller. See page 29 for

more information)

2) Press [talk/ﬂash] to accept the waiting call. After a short pause, you will hear the new

caller.

3) To return to the original caller, press [talk/ﬂash] again.

Selecting.a.Different.Channel

Your phone incorporates UltraClear Plus™ true compander circuitry which virtually eliminates background noise.

This innovative technology, together with 20 different channels, provides you with the best possible reception during

all your conversations. If you happen to encounter interference while using your phone, you can manually change

the phone’s channel for clear operation. To change the channel during a call, press [select/channel]. SCANNING

appears on the display, indicating the phone is changing to another channel. For more information on interference,

refer to "Radio Interference" on page 58.

Download from Www.Somanuals.com. All Manuals Search And Download.

Find.Handset

To locate a lost handset, press [ﬁnd handset] on the base. The handsets

will beep for 60 seconds. The beeping will stop when any handset key is

pressed or when [ﬁnd handset] is pressed. The handset will also stop

beeping automatically when an incoming call is received.

Tone.Dialing.Switch-over

If your telephone company requires pulse dialing, you can temporarily switch over to

tone dialing after the call connects. This feature is useful when you need tone dialing to

use automated such as telephone bank tellers, telephone prescription reﬁlls, customer

support menus, etc.

If your phone is set to pulse dialing mode, make your call normally. Once your call

connects, press [ /tone/ ]. Any digits you enter from then on will be sent as tone dialing.

When this particular call ends, the phone automatically returns to pulse dialing mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caller.ID.and.CIDCW.(Caller.ID.on.Call.Waiting)

You.must.subscribe.to.Caller.ID.services.through.your.local.telephone.provider.to.use.these.features.

When the telephone rings, the Caller ID feature allows you to view the caller’s name, phone number, date and time

of call. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s

name, the caller’s name appears on the display (up to ꢀ5 letters).

The date and

time received

Caller's name

Caller's phone number

You may receive any one of the following messages:

When invalid data is received

INCOMPLETE DATA

PRIVATE NAME

PRIVATE NUMBER

UNKNOWN NAME

When a private name is received

When a private number is received

When an unknown name is received

When an unknown number is received UNKNOWN NUMBER

Note:

•. Data.errors.appear.as." ".

•. If.you.answer.a.call.before.the.Caller.ID.message.is.received.(for.example,.before.the.second.ring),.

the.Caller.ID.message.will.not.appear.

•. When.the.call.is.received.via.a.telephone.company.that.does.not.offer.Caller.ID.service,.the.caller’s.

phone.number.and.name.do.not.appear..(This.includes.international.calls.)

•. When.the.call.is.received.via.a.private.branch.exchange.(PBX),.the.caller’s.phone.number.and.

name.may.not.appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caller.ID.on.Call.Waiting.(CIDCW)

If you subscribe to CIDCW offered by your telephone company, you will hear a Call Waiting tone while you are on a

call, and the Caller ID data will be displayed at the handset. To accept the waiting call, press [talk/ﬂash] (see page

27).

Note:.While.you.are.on.a.call,.the.received.Caller.ID.data.is.stored.on.the.handset.that.is.on.a.call.

only.

Viewing.the.Caller.ID.Message.List

The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You can also view the Caller

ID list during a call.

ꢀ) Press [cid/menu]. The summary screen displays the number of new messages and total

messages.

2) Use [vol/ / ] to scroll through the messages from the latest to the earliest, or use [vol/

/ ] to scroll through the messages from the earliest to the latest.

3) Press [cid/menu] to return to the call, or press [end] to return to standby.

Note:

•. In.Caller.ID.operation,.if.no.key.is.pressed.for.more.than.30.seconds,.an.error.tone.sounds.and.the.

handset.returns.to.standby.

•. Each.message.can.be.up.to.15.characters.for.the.name.and.15.digits.for.the.phone.number.

•. The.number.of.calls.from.the.same.Caller.ID.appears.next.to.the.received.time..Once.you.view.the.

new.message,.the.number.will.be.cleared.and.disappear.

• During a call, don't press [end], or the call will be disconnected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting.Information.from.the.Caller.ID.List

If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted.

Caller ID data can also be deleted manually.

Deleting.a.Caller.ID.message

ꢀ) Press [cid/menu] in standby. Find the message to be deleted from the Caller ID list by

pressing [vol/ / ] or [vol/ / ].

2) Press [delete/transfer].

3) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select/channel].

Deleting.all.Caller.ID.names/numbers

ꢀ) With the phone in standby, press [cid/menu].

2) Press [delete/transfer].

3) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select/channel].

You hear a conﬁrmation tone and all stored Caller ID messages are deleted.

Note:

•..While.using.the.DELETE.ALL?.or.DELETE.MESSAGE?.screen,.if.no.key.is.pressed.for.more.than.

30.seconds,.an.error.tone.sounds,.and.the.handset.returns.to.standby..

•. If.you.get.an.incoming.call.or.page,.the.deleting.operation.is.canceled.and.you.can.answer.the.call.

or.page.

3ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

The.Integrated.Answering.Machine

The cordless phone has a built-in answering machine that answers and records incoming calls. You can also use

your answering machine to record a conversation, leave a voice memo message, or to announce a special outgoing

message to callers when you're away from your phone.

Features

• Digital Tapeless Recording

• Up to ꢀ3 Minutes of Recording Time

• Call Screening

• Personal or Pre-recorded Outgoing Message

• Voice Prompts (English, French or Spanish)

• Time and Day Announcement

• Remote Message Retrieval

• Toll Saver

• Conversation Recording

• Voice Memo

• Selectable Ringer Options (High, Low or Off)

Digital Tapeless Recording allows you to quickly review, save, or delete the messages you choose. You will never

have to worry about a tape wearing out, jamming, or resetting improperly.

The Integrated Answering Machine is easy to use, but please.read through all of the instructions carefully.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting.Up.Your.Answering.Machine

Answering.Machine.Setting

To set the following six functions you must enter the menu mode.

• With the phone in standby, use [menu/clock] to scroll through the menu options.

The system returns to standby and sounds a tone after the last menu option.

• If any of the following occurs during menu setup, the system returns to standby, and

you will have to start over with the procedure you were performing:

- [talk/ﬂash] is pressed

menu/clock

- [

] (play/stop) is pressed

- ꢀ0 seconds elapse without a key press

- An incoming call is received

• If the system remains idle for ﬁve seconds after the announcement, the system returns

to standby. Once [vol/select/ ] or [vol/select/ ] is pressed, the idle time is extended

to ꢀ0 seconds.

menu/clock

Note:

•. For.your.convenience,.voice.prompts.will.guide.you.through.the.menu.

mode.

•. After.the.setting,.press.[

] (play/stop) to exit the menu mode, or [menu/

clock] to move to the next menu option.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting.the.Time

The clock on the cordless phone’s answering machine starts when power is supplied to the base.

Follow these steps to set the clock to the correct time.

ꢀ) With the phone in standby, press [menu/clock].

The system announces "Time" followed by the current time and the

instructions for setting the time.

2) Press [vol/select/ ] or [vol/select/ ] until the correct day is announced. The

numbers [ ] through [ ] are displayed on the base.

3) Press [set] to select the day.

4) Press [vol/select/ ] or [vol/select/ ] until you hear the correct hour setting.

The numbers [ ] through [ ] are displayed on the base.

5) Press [set] to select the hour.

6) Press [vol/select/ ] or [vol/select/ ] until you hear the correct minute

setting. The numbers [

minute is announced.

] through [

] are displayed on the base as each

7) Press [set] to select the minute.

8) Press [vol/select/ ] or [vol/select/ ] until you hear the correct AM or PM setting. The message counter

displays [ ] or [ ].

9) Press [set] to select the AM/PM setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

You hear a conﬁrmation tone followed by the announcement "Time," and the day and time are then announced for

your review. After a few seconds, the system announces "To set security code, press menu again."

Note:

•. Normally,.the.system.will.return.to.standby.if.it.remains.idle.for.10.seconds.after.[vol/select/ ] or

[vol/select/ ] is pressed. For setting the time, however, the idle time is extended to two minutes.

•. Press.and.hold.[vol/select/ ] or [vol/select/ ] to quickly scroll through the numbers on the

display.

Setting.a.Personal.Security.Code.(PIN)

If you want to be able to play your messages from a remote location, you need to enter a two-digit Personal

Identiﬁcation Number (PIN) code (01-99).

To select a PIN, perform the following steps:

ꢀ) With the phone in standby, press [menu/clock] twice.

The system announces "Security code," and the current PIN code is announced as it is displayed on the base.

Then the system announces the instructions for setting the PIN code.

2) Press [vol/select/ ] or [vol/select/ ] until the desired number appears.

3) Press [set] to select the PIN code. You hear a conﬁrmation tone, then the announcement "Security code"

followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press

menu again."

Note:.The.PIN.code.is.set.to."80".at.the.factory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting.the.Ring.Time

The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the

outgoing message. You can set the ring time to answer after two, four, or six rings. If you select Toll Saver [

], the

answering machine picks up after two rings if you have new messages, and after four rings if there are none. This

way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing

charges.

To set the ring time, perform the following steps:

ꢀ) With the phone in standby, press [menu/clock] three times. You hear "Ring time" and the current ring time ([ ],

[

], [ ], [

] Toll saver), and it is displayed on the base. Then you hear the guidance for setting the ring time.

2) Press [vol/select/ ] or [vol/select/ ] until the desired ring time appears.

3) Press [set] to select the new ring time. You hear a conﬁrmation tone, then the announcement "Ring time"

followed by the new ring time. After a few seconds, the system announces "To set record time, press menu

again."

Selecting.the.Message.Record.Time

You have three record time options: one minute, four minutes, and "Announce only."

"Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from

leaving a message.

To set the record time, perform the following steps:

ꢀ) With the phone in standby, press [menu/clock] four times. You hear "Record time" and the current recording

time ([ ] ꢀ minute, [ ] 4 minutes, [ ] Announce only, No recording), and it is displayed on the base. Then you

hear the guidance for setting the record time.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press [vol/select/ ] or [vol/select/ ] until the desired time appears.

3) Press [set] to select the new recording time. You hear a conﬁrmation tone, then the announcement "Record

time" followed by the new recording time. After a few seconds, the system announces "To set message alert,

press menu again."

Note:.After.setting.the.Announce.only.feature,.you.may.want.to.change.your.outgoing.message.not.

to.prompt.the.caller.to.leave.a.message..However,.the.prerecorded.message.changes.automatically.

Setting.the.Message.Alert.Tone

The message alert tone beeps every ꢀ5 seconds whenever you have unheard messages. The tone turns off

automatically after you listen to all your new messages. You can also turn off the message alert tone by pressing any

key on the base.

Follow the steps below to turn on the message alert tone:

ꢀ) With the phone in standby, press [menu/clock] ﬁve times. You hear "Message alert" and the current setting

([

] Off or [

] On), and it is displayed on the base. Then you hear the instructions for setting the Message

Alert.

2) Press [vol/select/ ] or [vol/select/ ] to make your selection.

3) Press [set] to select the new setting. You hear a conﬁrmation tone, then the announcement "Message alert"

followed by the current setting you have selected is announced. After a few seconds, the system announces "To

set language, press menu again." When the ﬁrst new message is received, the alert tone will begin to sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting.the.Language

The answering machine voice announcements can be heard in English, French or Spanish.

To choose the language of the answering machine voice announcements:

ꢀ) With the phone in standby, press [menu/clock] six times. You hear the announcement "Language, English"

followed by the voice prompts for setting the language. The current setting ([ ], [ ] or [ ]) appears on the

base.

2) Press [vol/select/ ] or [vol/select/ ] to select the desired language.

3) Press [set]. A conﬁrmation tone is heard along with the setting in the language selected.

Setting.Your.Outgoing.Message.(Greeting)

When you receive a call, the answering machine automatically plays either a preset message or your own greeting.

Preset.message

The following message is prerecorded:

"Hello, no one is available to take your call. Please leave a message after the tone."

If the answering machine is set to announce only, the preset greeting automatically changes to:

"Hello. No one is available to take your call. Please call again."

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording.a.personal.outgoing.message.(Greeting)

ꢀ) With the phone in standby, press and hold [greet]. You will hear the announcement "Record greeting" and a

conﬁrmation tone. [

2) Start recording your message. You have 30 seconds, and the message counter starts to count down [

] every second.

3) When you are ﬁnished recording your greeting, press [greet], [

] ﬂashes on the message counter.

] to

[

] (play/stop) or [set]. You hear a conﬁrmation

tone, and then your greeting plays back for you. See "Selecting the Message Record Time" on page 36 on how

to set the announce only feature.

Note:

•. Your.greeting.must.be.more.than.2.seconds.and.less.than.30.seconds.to.record...

•. Position.yourself.as.near.to.the.base’s.microphone.as.possible.and.speak.clearly.when.recording.

your.outgoing.message.

Choosing.between.the.two.outgoing.messages

With the phone in standby, press [greet] to play the current outgoing message. While the outgoing message

is playing, press [greet] again to switch between the prerecorded greeting and the personal greeting. After the

message ﬁnishes playing, a conﬁrmation tone is heard.

Note:.To.delete.the.personal.greeting,.press.[ ] (delete) during the announcement and the system

announces."Greeting.has.been.deleted."

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting.the.Base.Ringer.Volume

The base has three ringer volume settings: high, low, and off. You can change

the ringer volume while in standby or while an incoming call is ringing.

ꢀ) Press [ringer]. You hear the ringer at the current volume level ([

] High,

[

] Low, [ ] off) (if you set the base ringer volume to off, "Ringer off"

is announced) and it is displayed on the base.

2) Press [ringer] repeatedly until the desired ringer option appears.

3) The system displays the new ringer volume.

Note:.Even.when.the.base.ringer.is.turned.off,.the.handset.will.

still.ring.

Temporarily.Mute.the.Base.Ringer.and.Call.Screen

Press [

] (play/stop) to temporarily mute the incoming ring and call screen. The ringer will sound with the next

incoming call. To turn the ringer back on for this call, press [ringer]. To hear the answering machine and screen this

call, press [vol/select/ ] or [vol/select/ ].

Adjusting.the.Speaker.Volume.Level

You can adjust the volume of the base speaker by pressing [vol/select/ ] or [vol/select/ ] on the base. Press

[vol/select/ ] for louder or [vol/select/ ] for softer while the base speaker is being used except for menu mode.

The numbers [ ] - [ ] are displayed on the base indicating the volume levels. [ ] being the softest and [ ] being

the loudest.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using.Your.Answering.Machine

Turning.the.Answering.Machine.On/Off

To turn the answering machine on:

ꢀ) With the phone in standby, press [ ] (answer on/off).

2) The phone announces "Answering system is on." and plays the

current greeting.

3) The message counter displays the number of messages stored

in memory. If the counter ﬂashes, then you have new messages

waiting.

To turn the answering machine off:

ꢀ) With the phone in standby, press [ ] (answer on/off) again.

2) The phone announces "Answering system is off." The message

counter is no longer illuminated.

Note:.When.the.answering.machine.is.full,.[.

] is

displayed.on.the.base,.and.the.system.announces."No.remaining.time.".You.should.delete.some.

messages.so.that.the.system.can.record.new.messages..(Refer.to."Reviewing.Messages".on.page.

42.)

4ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Reviewing.Messages

The message counter displays the number of messages stored in memory. If the display ﬂashes, new messages

waiting for you. The ﬂashing number represents the number of new messages, not total messages. The cordless

phone plays your new messages ﬁrst; after all the new messages are played, you can play the old messages.

To review your messages from the base:

With the phone in standby, press [

messages. It announces the message number, plays the message, then announces the time

and day it was received.

]. The system announces the number of new and old

Playing.

messages

Press [ ] once to go to the beginning of the current message.

Press [ ] repeatedly to go back to a previous message.

Press and hold [ ] to rewind through the current message.

Repeating

a.message

Skipping.

Press [ ] to go to the beginning of the next message.

a.message

Press and hold [ ] to fast forward through the current message.

Deleting.

a.message

While a message is playing, press [ ]. The message is permanently deleted.

Deleting

While the phone is in standby, press [ ]. When the system asks you to conﬁrm, press [ ]

all.messages

again. All messages are permanently deleted.

Ending.the.

message.review

Press [

] to stop the message playback and return to standby.

Note:.You.cannot.delete.unheard.messages..If.you.try.to.delete.messages.before.listening.to.them,.

the.answering.machine.will.beep.and.say."Please.playback.all.messages."

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording.a.Conversation

You can record up to ꢀ0 minutes of conversation while you are using your phone. Any conversation that lasts less

than 2 seconds will not be recorded.

ꢀ) During a conversation from the handset, press and hold [memo]. The unit begins recording with a conﬁrmation

tone and [

] ﬂashes on the message counter.

A.beep.that.can.be.heard.by.both.parties.sounds.during.recording.

2) To stop recording, press [

] (play/stop) or [memo]. You hear a conﬁrmation tone.

Note:

• If you receive a call waiting tone while recording a conversation, press [talk/ﬂash] to accept the

waiting.call..The.recording.feature.continues.recording.the.new.call..The.original.call.is.put.on.

hold.

•. A.recorded.conversation.is.treated.as.a.typical.message.and.will.be.added.to.the.stored.

messages.

•. When.recording.a.conversation,.all.dialing.features.except.for.using.call.waiting.(see.page.27).are.

disabled..Stop.recording.if.you.need.to.enable.any.other.handset.keys.

•. Every.state.has.different.regulations.governing.the.recording.of.conversations.over.the.telephone..

Make.sure.to.check.your.local,.state.and.federal.laws.before.using.this.product.to.record.any.

telephone.conversation.in.order.to.determine.that.your.use.is.in.compliance.with.such.laws.or.

guidelines.

Download from Www.Somanuals.com. All Manuals Search And Download.

Voice.Memo

The voice memo function allows you to record messages as short as two seconds and as long as four minutes.

ꢀ) With the phone in standby, press and hold [memo]. You hear an announcement "Record memo message" and a

tone. [

] ﬂashes on the message counter.

2) Start your recording.

3) When you have ﬁnished, press [

] (play/stop), [memo] or [set] to stop recording. You hear a conﬁrmation

tone and the system returns to standby.

Note:.When.the.answering.machine.is.full,.[.

terminated.

] appears on the message counter and recording is

Remote.Operation

When you are away from home, you can operate your answering machine with any touch-tone telephone. Use this

function to check for recorded messages, to play or delete messages, even record a new greeting message.

ꢀ) Call your telephone number.

2) During the greeting message, press [0] and enter your PIN code (See page 35).

3) The answering machine announces the current time and the number of messages stored in memory. Then you

hear "To play incoming message, press zero two. For help, press one zero."

Download from Www.Somanuals.com. All Manuals Search And Download.

4) You may continue to listen to the voice prompts, or you may select a command from the following chart:

Command Function

[0] then [1] Repeat a Message

[0] then [2] Play Incoming Messages

[0] then [3] Skip a Message

[0] then [4] Delete a Message

[0] then [5] Stop Operation

[0] then [6] Answering Machine On

[0] then [7] Memo Record/Stop*

[0] then [8] Greeting Message Record/Stop*

[0] then [9] Answering Machine Off

[1] then [0] Voice Prompts

* For Memo Record and Greeting Message Record functions, the ﬁrst time you enter the corresponding command, it

starts the Recording function. If you want to stop the recording, enter the command again.

Note:.Once.you.enter.the.remote.access.menu,.you.must.enter.a.command.within.15.seconds,.or.the.

answering.machine.automatically.hangs.up.and.returns.to.standby.

5) After all of the voice prompts have been played, you hear intermittent beeps indicating that the system is in the

command waiting mode. You may enter another command at this time from the chart.

6) When you are ﬁnished, hang up to exit the system. The answering machine automatically returns to standby.

Note:.For.your.convenience.remote.operation.cards.are.provided.for.you.to.use.while.away.from.

home.(located.back.of.this.manual).

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn.on.the.Answering.Machine.Remotely

If you have forgotten to turn on your answering machine, you can turn it on remotely from any touch-tone telephone.

ꢀ) Call your telephone number.

2) Wait ten rings until the system answers. You hear intermittent beeps.

3) Press [0] and then enter your PIN code. The answering machine announces the number of messages stored in

memory. You hear "To play incoming message, press zero two. For help, press one zero."

4) Press [0] then [6] to turn the answering machine On. You hear the outgoing message and a conﬁrmation tone.

5) Hang up the phone; subsequent calls will be answered by the system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing.the.Digital.Security.Code

To protect you against misbilled calls which might result from your phone being activated by other equipment, the

cordless phone provides AutoSecure™ (which electronically locks your phone when each handset is in the cradle)

and Random Code™ digital security which automatically selects one of over 262,000 digital security codes for each

handset and the base. If the handset battery pack is completely discharged or the battery pack is removed, the

digital security code will be lost. If this happens, a new security code is set automatically the next time the battery

pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code,

you can change the code.

ꢀ) Pick up the handset from the cradle. Press and hold [ﬁnd handset] on the base.

2) While holding [ﬁnd handset], place the handset in the base, and leave the handset in the base for more than 3

seconds.

3) Pick up the handset from the base. Then place the second handset in the base and wait for more than

3 seconds. No need to hold [ﬁnd handset] this time.

4) Press [talk/ﬂash] on one handset. Once you make sure TALK appears on the display, press [end]. Then, try with

the other handset. If each handset displays TALK, a new security code is set. Otherwise, return to step ꢀ and try

again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Speciﬁcations

The phone complies with FCC Parts ꢀ5 and 68.

Operating.temperature

AC.Adapter

-ꢀ0°C to +50°C (+ꢀ4°F to +ꢀ22°F)

For.the.base

AD-3ꢀ4

For.the.charger

AD-3ꢀ0 or AD-ꢀ0ꢀ0

ꢀ20V AC 60Hz

Part.number

Input.Voltage

Output.Voltage

Part.number

Capacity

ꢀ20V AC 60Hz

9V DC 350mA

BT-ꢀ006

9V DC 2ꢀ0mA

Battery

500mAh, 3.6V

924.5ꢀ6925 - 926.704425 MHz

2,405.ꢀ55942 - 2,4ꢀꢀ.7ꢀ844ꢀ MHz

Frequency

Note:.To.avoid.damage.to.the.phone.use.only.Uniden.AD-314,.AD-310.or.AD-1010.and.BT-1006.with.

your.phone.

Speciﬁcations, features, and availability of optional accessories are all subject to change without prior notice.

Power.Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Talk.and.Standby.Times

With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of

standby time. When your handset is not being used and is left off of the charging cradle the battery will gradually

discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle

after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced respective

to the amount of time the handset is off of the charging cradle.

Low.battery.alert

When the battery pack is very low and needs to be charged, the phone is programmed to

eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears

on the LCD and none of the keys will operate. During a call, LOW BATTERY ﬂashes and the

handset beeps. Complete your conversation as quickly as possible and return the handset to the cradle for charging.

Note:.Information.stored.in.the.phone's.memory.will.be.retained.for.30.minutes.after.the.battery.pack.

is.removed..This.includes.all.setup.information,.last.number.dialed,.speed.dial.memory,.and.the.CID.

list.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum

performance, be sure to return the handset to the cradle after a telephone call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery.replacement.and.handling

Recharge your phone on a regular basis by returning the handset to either cradle after each phone call. When the

operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your

battery should last about one year. To order replacement batteries, please contact Uniden’s Parts Department. The

contact information is listed on the back cover page.

Warning:.

Caution

To.avoid.the.risk.of.personal.injury.or.

property damage from ﬁre or electrical

shock,.only.use.the.Uniden.battery.

model.and.Uniden.adapter.model.

speciﬁcally designated for this product.

• Use only the speciﬁed Uniden battery pack (BT-1006).

•.Do.not.remove.the.battery.from.the.handset.to.charge.it.

• Never throw the battery into a ﬁre, disassemble it, or heat it.

•.Do.not.remove.or.damage.the.battery.casing.

Cleaning.the.battery.charging.contacts

To maintain a good charge, clean the charging contacts on the handset once

a month. Dampen a cloth with plain water. Gently rub the damp cloth over the

charging contacts until all visible dirt is removed. Dry the contacts thoroughly

before returning the handset to the cradle.

Caution

Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..Doing.so.

may discolor the surface of the telephone and damage the ﬁnish.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Traveling.Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range

limits of the base, your call will terminate within one minute.

Common.Issues

If your phone is not performing to your expectations, please try these simple steps ﬁrst. If these steps do not solve

your problem, please call our Customer Hotline. See back cover page for contact information.

Symptom

Suggestion

The charge/in.use LED or

LED won't illuminate when

the handset is placed in the

cradle.

• Make sure the AC adapter is plugged into the cradle and wall outlet.

• Make sure the handset is properly seated in the cradle.

• Make sure the charging contacts on the handsets are clean.

• Move the handset and/or base away from metal objects or appliances and try

again.

• Press [select/channel] during a call to help eliminate background noise.

• Make sure that the handset is not too far from the base.

The audio sounds weak and/

or scratchy.

5ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Suggestion

• Re-register both handsets (see page ꢀ3).

• Check both ends of telephone line cord.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Disconnect the AC adapter for a few minutes, then reconnect it.

• Change the digital security code (see page 47).

Can’t make or receive calls.

• Make sure that the handset is not too far from the base.

• Check the dialing mode used by your telephone company.

• Re-register both handsets (see page ꢀ3).

• The battery pack may be weak. Charge the battery for ꢀ5-20 hours.

• The handset may be too far away from the base unit.

• Place the base unit away from appliances or metal objects.

• Change the digital security code (see page 47).

The handset doesn’t ring or

receive a page.

• Check the battery pack to ensure there is a secure connection.

• Make sure ringer volume isn’t set to "off."

• Keep both handsets away from microwave ovens, computers, remote control

toys, wireless microphones, alarm systems, intercoms, room monitors,

ﬂuorescent lights, and electrical appliances.

Severe noise interference.

• Move the base to another location or turn off the source of interference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Suggestion

• The call was answered before the second ring.

• The call was placed through a switchboard.

• Charge the handset.

• Your Caller ID service may not be active; contact your local telephone service

provider.

The Caller ID does not

display.

• Make sure the battery pack is connected to the handset and fully charged.

• Re-register the non-functional handset.

A handset is not working.

• Make sure the other handset is not already in use. Both handsets cannot be in

talk at the same time.

• Place the handset in the base for at least 5 seconds to re-register to the base.

• Make sure the handset is not too far from the base when trying to use.

Unavailable message is

displayed on the LCD screen

of the handset.

The handset doesn’t

communicate with the base or • Re-register both handsets (see page ꢀ3).

the other handset.

• Only one handset at a time can talk with an outside caller. To allow the other

handset to talk to the caller, transfer the call.

The answering machine does • Make sure the AC adapter is plugged into wall outlet.

not work. • Make sure the answering machine is turned on.

The answering machine does • Set the record time to either the one minute or four minute option.

No 3- way conversation.

not record any messages.

• The memory may be full. Delete some or all of the saved messages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Suggestion

• The incoming messages may be too long. Remind callers to leave a brief

message.

Messages are incomplete.

• The memory may be full. Delete some or all of the saved messages.

After a power failure, the

outgoing message is deleted.

• Record your personal outgoing message again. The default message should

remain.

No sound on the base

speaker during call monitoring • Adjust the speaker volume on the base unit.

or message playback.

• Make sure you’re using the correct PIN code.

• Make sure that the touch-tone phone you’re using can transmit the tone for at

least two seconds. If it cannot, you may have to use another phone to access

your messages.

Cannot access remote call-in

features from another touch-

tone phone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Liquid.Damage

Moisture and liquid can damage your cordless phone.

• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the

liquid, and use as normal.

• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the

handset battery compartment or vent openings on the base), follow the steps below:

Handset

Base

ꢀ) Remove the battery cover and leave it off for ventilation.

2) Disconnect the battery pack. Leave the battery cover off

and the battery pack disconnected for at least 3 days.

3) Once the handset is completely dry, reconnect the

battery pack and the battery cover.

ꢀ) Disconnect the AC adapter from the base,

cutting off electrical power.

2) Disconnect the telephone cord from the base.

3) Let dry for at least 3 days.

4) Recharge the handset's battery pack for ꢀ5 to 20 hours

before using.

IMPORTANT:.

You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset,

base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our

Customer Service Hotline. See back cover page for contact information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rechargeable.Nickel-Cadmium..

Batteries.Must.Be.Recycled.or..

Precautions!

Before you read anything else, please note the following:

Disposed.of.Properly

Warning!

• Uniden voluntarily participates in an RBRC^®

industry program to collect and recycle nickel-

cadmium batteries at the end of their useful life, when taken

out of service within the United States.

Uniden America Corporation DOES NOT represent this unit

to be waterproof. To reduce the risk of ﬁre, electrical shock,

or damage to the unit, DO NOT expose this unit to rain or

moisture.

• The RBRC^®program provides a convenient alternative to

placing used nickel-cadmium batteries into the trash or

municipal waste stream, which is illegal in some areas.

• Through the RBRC^®program, Uniden makes it easy for you

to drop off the used battery at local retailers of replacement

nickel-cadmium batteries. You may also contact your local

recycling center for information on where to return the used

battery.

Rechargeable.Nickel-Cadmium.Battery.Warning

• This equipment contains a rechargeable nickel-cadmium

battery.

• Cadmium is a chemical known to the State of California to

cause cancer.

• The rechargeable nickel-cadmium battery contained in this

equipment may explode if disposed of in a ﬁre.

• Do not short-circuit the battery.

• Do not charge the rechargeable nickel-cadmium battery used

in this equipment in any charger other than the one designed

to charge this battery as speciﬁed in the owner's manual.

Using another charger may damage the battery or cause the

battery to explode.

Please call ꢀ-800-8-BATTERY for information on Ni-Cd battery

recycling in your area. Uniden’s involvement in this program

is part of its commitment to protecting our environment and

conserving natural resources.

• RBRC^®is a registered trademark of the Rechargeable Battery

Recycling Corporation.

Uniden works to reduce lead content in our PVC coated cords

in our products and accessories.

Warning!

The cords on this product and/or accessories contain lead, a

chemical known to the State of California to cause birth defects

or other reproductive harm. Wash hands after handling.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important.Safety.Instructions

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk of ﬁre,

electric shock and injury to persons, including the following:

ꢀ. Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

The.FCC.Wants.You.To.Know

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA.

On the bottom of this equipment is a label that contains,

among other information, a product identiﬁer in the format US:

AAAEQ##TXXXX. If requested, this number must be provided

to the telephone company.

2. Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric

shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity

of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a ﬁre. They may

explode. Check with local authorities for possible battery

disposal instructions.

An applicable Universal Service Order Codes (USOC)

certiﬁcation for the jacks used in this equipment is provided (i.e.,

RJꢀꢀC) in the packaging with each piece of approved terminal

equipment. A plug and jack used to connect this equipment to

the premises wiring and telephone network must comply with

the applicable FCC Part 68 rules and requirements adopted by

the ACTA.

A compliant telephone cord and modular plug is provided with

this product. It is designed to be connected to a compatible

modular jack that is also compliant. See installation instructions

for details.

5. Do not disassemble any component of this product.

SAVE.THESE.INSTRUCTIONS

The REN is used to determine the number of devices that may

be connected to a telephone

CAUTION!

line. Excessive RENs on a telephone line may result in the

devices not ringing in response to an incoming call. In most but

not all areas, the sum of RENs should not exceed ﬁve (5.0). To

be certain of the number of devices that may be connected to

a line, as determined by the total RENs, contact the telephone

provider. For products approved after July 23,

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions. Do not

open or mutilate the battery, and disconnect the battery before

shipping this product.

2001, the REN for this product is part of the product identiﬁer

that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g.,

03 is a REN of 0.3). For earlier products, the REN is separately

Download from Www.Somanuals.com. All Manuals Search And Download.

shown on the label.

other than as detailed by the owner's manual, could void your

authority to operate this product.

If this equipment causes harm to the telephone network, the

telephone company will notify you in advance that temporary

discontinuance of service may be required. But if advance

notice isn't practical, the telephone company will notify the

customer as soon as possible. Also, you will be advised of

your right to ﬁle a complaint with the FCC if you believe it is

necessary. The telephone company may make changes in its

facilities, equipment, operations or procedures that could affect

the operation of the equipment. If this happens the telephone

company will provide advance notice in order for you to make

necessary modiﬁcations to maintain uninterrupted service.

Please follow instructions for repairing, if any (e.g. battery

replacement section); otherwise do not substitute or repair

any parts of the device except as speciﬁed in this manual.

Connection to party line service is subject to state tariffs.

Contact the state public utility commission, public service

commission or corporation commission for information. This

equipment is hearing aid compatible.

This device complies with part ꢀ5 of the FCC rules. Operation

is subject to the following two conditions: (ꢀ) This device may

not cause harmful interference, and (2) This device must accept

any interference received, including interference that may

cause undesired operation. Privacy of communications may not

be ensured when using this phone.

To insure the safety of users, the FCC has established

criteria for the amount of radio frequency energy various

products may produce depending on their intended usage.

This product has been tested and found to comply with the

FCC's exposure criteria. For body worn operation, the FCC RF

exposure guidelines were also met when used with the Uniden

accessories supplied or designed for this product. Use of other

accessories may not ensure compliance with FCC RF exposure

guidelines and should be avoided.

Should you experience trouble with this equipment, please

contact Uniden customer service at 800-297-ꢀ023. If the

equipment is causing harm to the telephone network, the

telephone company may request that you disconnect the

equipment until the problem is resolved.

NOTICE: According to telephone company reports, AC electrical

surges, typically resulting from lightning strikes, are very

destructive to telephone equipment connected to AC power

sources. To minimize damage from these types of surges, a

surge arrestor is recommended.

Radio.Interference

Radio interference may occasionally cause buzzing and

humming in your cordless handset, or caused by external

sources such as TV, refrigerator, vacuum cleaner, ﬂuorescent

lighting, or electrical storm. Your unit is NOT DEFECTIVE. If

these noises continue and are too distracting, please check

around your home to see what appliances may be causing

the problem. In addition, we recommend that the base not

be plugged into a circuit that also powers a major appliance

because of the potential for interference. Be certain that

the antenna on the unit is fully extended when needed. In

Changes or modiﬁcations to this product not expressly

approved by Uniden, or operation of this product in any way

Download from Www.Somanuals.com. All Manuals Search And Download.

the unlikely event that you consistently hear other voices or

distracting transmissions on your phone, you may be receiving

radio signals from another cordless telephone or other source

of interference. If you cannot eliminate this type of interference,

you need to change to a different channel. Finally, it should be

noted that some cordless telephones operate at frequencies

that may cause interference to nearby TVs and VCRs. To

minimize or prevent such interference, the base of the cordless

telephone should not be placed near or on top of a TV or VCR.

If interference is experienced, moving the cordless telephone

farther away from the TV or VCR will often reduce or eliminate

the interference.

I.C..Notice

Terminal.Equipment

NOTICE: This equipment meets the applicable Industry Canada

Terminal Equipment Technical Speciﬁcations. This is conﬁrmed

by the registration number. The abbreviation, IC, before the

registration number signiﬁes that registration was performed

based on a Declaration of Conformity indicating that Industry

Canada technical speciﬁcations were met. It does not imply that

Industry Canada approved the equipment

NOTICE: The Ringer Equivalence Number (REN) for this

terminal equipment is marked on the equipment itself. The REN

assigned to each terminal equipment provides an indication

of the maximum number of terminals allowed to be connected

to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the

requirement that the sum of the Ringer Equivalence Numbers of

all the devices does not exceed ﬁve.

Cordless.Telephone.Privacy

Cordless telephones are radio devices. Communications

between the handset and base of your cordless telephone

are accomplished by means of radio waves which are

broadcast over the open airways. Because of the inherent

physical properties of radio waves, your communications can

be received by radio receiving devices other than your own

cordless telephone unit. Consequently, any communications

using your cordless telephone may not be private.

Radio.Equipment

The term "IC:" before the radio certiﬁcation number only

signiﬁes that Industry Canada technical speciﬁcations were

met. Operation is subject to the following two conditions: (ꢀ) this

device may not cause interference, and (2) this device must

accept any interference, including interference that may cause

undesired operation of the device. "Privacy of communications

may not be ensured when using this telephone".

Download from Www.Somanuals.com. All Manuals Search And Download.

ANY NATURE WHATSOEVER, WHETHER EXPRESS,

IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,

BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. THIS WARRANTY DOES NOT COVER OR

PROVIDE FOR THE REIMBURSEMENT OR PAYMENT

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some

states do not allow this exclusion or limitation of incidental or

consequential damages so the above limitation or exclusion

may not apply to you.

LEGAL REMEDIES: This warranty gives you speciﬁc legal

rights, and you may also have other rights which vary from

state to state. This warranty is void outside the United States

of America and Canada. PROCEDURE FOR OBTAINING

PERFORMANCE OF WARRANTY: If, after following the

instructions in the owner's manual you are certain that the

Product is defective, pack the Product carefully (preferably in

its original packaging). Disconnect the battery from the Product

and separately secure the battery in its own separate packaging

within the shipping carton. The Product should include all parts

and accessories originally packaged with the Product. Include

evidence of original purchase and a note describing the defect

that has caused you to return it. The Product should be shipped

freight prepaid, by traceable means, to warrantor at:

Uniden America Service

One.Year.Limited.Warranty

Important: Evidence of original purchase is required for

warranty service. WARRANTOR: UNIDEN AMERICA

CORPORATION ("Uniden") ELEMENTS OF WARRANTY:

Uniden warrants, for one year, to the original retail owner,

this Uniden Product to be free from defects in materials and

craftsmanship with only the limitations or exclusions set out

below.

WARRANTY DURATION: This warranty to the original user

shall terminate and be of no further effect ꢀ2 months after the

date of original retail sale. The warranty is invalid if the Product

is (A) damaged or not maintained as reasonable or necessary,

(B) modiﬁed, altered, or used as part of any conversion kits,

subassemblies, or any conﬁgurations not sold by Uniden, (C)

improperly installed, (D) serviced or repaired by someone

other than an authorized Uniden service center for a defect

or malfunction covered by this warranty, (E) used in any

conjunction with equipment or parts or as part of any system

not manufactured by Uniden, or (F) installed or programmed by

anyone other than as detailed by the owner's manual for this

product.

STATEMENT OF REMEDY: In the event that the product does

not conform to this warranty at any time while this warranty is

in effect, warrantor will either, at its option, repair or replace

the defective unit and return it to you without charge for parts,

service, or any other cost (except shipping at its option, may

replace the unit with a new or refurbished unit. THE LIMITED

WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE

WARRANTY PERTAINING TO THE PRODUCT AND IS IN

LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF

4700 Amon Carter Blvd.

Fort Worth, TX 76ꢀ55

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Connect the cradle .......................... 9 Ringer tone.................................... 26

Controls and functions................. 5, 6 Ringer volume ......................... 26, 40

AC adapter information.................. 48

Answering machine

Ring time ....................................... 36

D,.E,.F,.G,.H,.I,.J,.K,.L

Deleting a message................... 42

Playing a message .................... 42

Recording a conversation.......... 43

Repeating a message................ 42

Skipping a message .................. 42

Turning on/off............................. 4ꢀ

Dial mode ...................................... ꢀ7

Digital security code ...................... 47 Security code

Earpiece volume............................ 26

Find handset.................................. 28

Answering machine ................... 35

Connecting base and handset... 47

Greeting......................................... 38 Speed dial memory

Installing the phone ......................... 7

Interference ................................... 58

Liquid damage............................... 55

Making calls from speed dial

memory.............................. 23

Storing names and numbers in

speed dial memory ............ ꢀ9

Basic setup.................................... ꢀ5

Battery pack

M,.N,.O,.P,.Q

Information................................. 48

Installing ...................................... 8

Preparing and charging ........... 8, 9

Replacement and handling........ 50

T,.U

Maintenance.................................. 48

Making a call.................................. 23

Menu mode.................................... 33

Message alert................................ 37

Outgoing message ........................ 38

Personal security code

Talk and standby times.................. 49

Technical information..................... 48

Tone dialing switch-over................ 28

Transferring a Call......................... 25

Traveling out-of-range ................... 5ꢀ

Troubleshooting............................. 5ꢀ

Call waiting .................................... 27

Caller ID service ............................ 29

Caller ID on call waiting............. 30

Deleting ..................................... 3ꢀ

Making a call.............................. 24

Viewing...................................... 30

Channel......................................... 27

Charging the battery pack ............... 9

Cleaning contacts.......................... 50

Clock.............................................. 34

(PIN code) ............................. 35

Precautions.................................... 56

V,.W,.X,.Y,.Z

Voice memo................................... 44

Volume control

Base .......................................... 40

Handset ..................................... 26

Wall mounting................................ ꢀꢀ

Receiving a call ............................. 23

Record time ................................... 36

Redial ............................................ 26

Remote operation.......................... 44

Warranty........................................ 60

6ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote.Operation.Card

REMOTE OPERATION CARD

MEMORY LOCATION MEMO

Name Phone Number

Memory

Location

Remote access away from home Turn on the answering system remotely

1. Call your phone number from

a touch-tone phone.

1. Call your phone and let it ring

10 times until it answers.

2. During the outgoing message, 2. Press [0] and enter your PIN

press [0] and enter your PIN

code. The answering system

announces the number of

messages stored in memory

and the voice prompts. The

phone stands by for you to

enter a command.

code.

3. Press [0] then [5] to stop

the announcement.

4. Press [0] then [6] to turn the

answering system on.

3. To quit, hang up the phone.

MEMORY LOCATION MEMO

Name Phone Number

REMOTE OPERATION CARD

Memory

Location

Remote access away from home Turn on the answering system remotely

1. Call your phone number from

a touch-tone phone.

1. Call your phone and let it ring

10 times until it answers.

2. During the outgoing message, 2. Press [0] and enter your PIN

press [0] and enter your PIN

code. The answering system

announces the number of

messages stored in memory

and the voice prompts. The

phone stands by for you to

enter a command.

code.

3. Press [0] then [5] to stop

the announcement.

4. Press [0] then [6] to turn the

answering system on.

3. To quit, hang up the phone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote.Operation.Card

MEMORY LOCATION MEMO

Phone Number

Task

Key

Repeat a Message

Memory

Location

Name

Play Incoming Messages

Skip a Message

Delete a Message

Stop Operation

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answering System Off

Voice Prompts

MEMORY LOCATION MEMO

Name Phone Number

Task

Key

Repeat a Message

Memory

Location

Play Incoming Messages

Skip a Message

Delete a Message

Stop Operation

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answering System Off

Voice Prompts

Download from Www.Somanuals.com. All Manuals Search And Download.

At.Uniden,.we’ll.take.care.of.you!

Thank you for purchasing a Uniden product. If you have any questions or problems,

please.do.not.return.this.product.to.the.place.of.purchase.

Our customer care specialists are here to help you! Visit our website at www.uniden.com or

call our Customer Hotline at 1-800-297-1023 during regular business hours.*

Having.Trouble?

To order headsets, additional handsets, replacement batteries or other accessories, visit our

website at www.uniden.com or call 1-800-554-3988 during regular business hours.*

Need.a.Part?

Help.for.our.

Special.Needs.

Customers

If you need special assistance due to a disability or have questions on the accessibility

features of this product, please call 1-800-874-9314.(voice.or.TTY).

* Central Standard Time. Detailed customer service hours are available at www.uniden.com.

May be covered under one or more of the following U.S. patents:

4,797,9ꢀ6 5,426,690 5,434,905 5,49ꢀ,745 5,493,605 5,533,0ꢀ0

5,574,727 5,58ꢀ,598 5,650,790 5,660,269 5,66ꢀ,780 5,663,98ꢀ

5,67ꢀ,248 5,696,47ꢀ 5,7ꢀ7,3ꢀ2 5,732,355 5,754,407 5,758,289

5,768,345 5,787,356 5,794,ꢀ52 5,80ꢀ,466 5,825,ꢀ6ꢀ 5,864,6ꢀ9

5,893,034 5,9ꢀ2,968 5,9ꢀ5,227 5,929,598 5,930,720 5,960,358

5,987,330 6,044,28ꢀ 6,070,082 6,ꢀ25,277 6,253,088 6,3ꢀ4,278

6,4ꢀ8,209 6,6ꢀ8,0ꢀ5 6,67ꢀ,3ꢀ5 6,7ꢀ4,630 6,782,098 6,788,920

6,788,953 6,839,550 6,889,ꢀ84 6,90ꢀ,27ꢀ 6,907,094 6,9ꢀ4,940

6,953,ꢀꢀ8 7,023,ꢀ76

Other patents pending.

Download from Www.Somanuals.com. All Manuals Search And Download.

Telex Headphones HD 3A User Manual
Telex Speaker DN9848 Loudspeaker Processor User Manual
Thermador Range P30 P36 User Manual
Toshiba DVR SD 36VESE User Manual
Ultra Products Power Supply U1242368 User Manual
Uniden Cell Phone DX15686 Series User Manual
Univex Home Theater System MCD908 User Manual
ViewSonic Projection Television VS10459 User Manual
Vulcan Hart Range V2B18 User Manual
Weed Eater Blower 530088049 User Manual