Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Storing and Editing the RocketDial
31
31
32
Welcome/Features
Controls and Functions
4
5
Making Calls with the RocketDial
Deleting the RocketDial
Getting Started
Caller ID Features
Installing the Phone
7
12
Caller ID and CIDCW (Caller ID on Call Waiting) 33
Mounting the Main Base Unit on a Wall
When the Telephone Rings
33
34
35
37
38
Register Handsets to the Main Base Before Using! 14
Viewing the Caller ID Message List
Deleting Information from the Caller ID List
Making a Call from the Caller ID List
Storing Caller ID Messages in Memory Dialing
When to Re-register Handsets
Call Transfer Feature
Setting Menu Display Options
15
15
16
Basics
The Integrated Answering Device
The Integrated Answering Device
Features
Turning the Answering System On/Off
Setting Up Your Answering System
Using Your Answering System
Making and Receiving Calls
Adjusting the Handset Ringer and
Earpiece Volume
19
39
39
40
41
49
20
21
21
22
22
22
Tone Dialing Switch Over
Traveling Out-of-Range
Selecting a Different Channel
Find Handsets
Using Call Waiting
Memory Dialing
Additional Information
Changing the Digital Security Code
Installing the Beltclip
Headset Installation
Note on Power Sources
Maintenance
56
56
57
57
57
58
63
64
66
67
Storing Phone Numbers and Names in Speed Dial Memory 23
Steps for Entering Names and Special Characters 25
Making Calls from Speed Dial Memory
Chain Dialing
Editing a Stored Name and/or Phone Number
Erasing a Stored Name and Phone Number
26
27
28
30
Troubleshooting
General Information
Precautions & Warranty
I.C. Notice
RocketDial
Index
RocketDial
31
www.uniden.com
[ 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden dual handset cordless telephone. This
cordless phone is designed and engineered to exacting standards for reliability, long life,
and outstanding performance.
Welcome
Features
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes. The color of your cordless telephone may vary.
• 5.8 GHz Extended Range Technology
• Dual Handset System
(Extra Handset & Charger Included)
• Integrated Telephone Answering Device
(ITAD) (Trilingual Announcement Option)
• Voice Prompted ITAD Setup Menu
• 3 Line Backlit Display
• 10 Speed Dial Memory
• One-Touch RocketDial
• Call Transfer from Handset to Handset
• Find handset Locator
• Earpiece Volume Control
• Ringer Levels (High-Low-Off)
• Hearing Aid Compatible
• Desk or Wall Mountable
• Caller ID/Caller ID on Call Waiting
• 30 Caller ID Memory Locations
®
®
Uniden and RocketDial are registered trademarks of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of
Uniden America Corporation.
[ 4 ]
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
Handsets
1. Handset antenna
2. Beltclip hole
3. Jack for optional headset
4. Handset battery compartment
5. Handset earpiece
1
6. LCD display
5
7. call id (Caller ID)/menu key
2
8. vol/
9. vol/
/
/
(volume & scroll) key
(volume & scroll) key
(left cursor) key
6
10.
/tone/
11. redial/pause key
12. select/channel key
13. Handset microphone and
ringer speaker
14. RocketDial key
15. end key
16. talk/flash key
7
8
9
14
15
16
3
4
10
11
12
13
17
18
19
17. #/
(right cursor) key
18. memory key
19. delete/transfer key
20. Handset charging contacts
20
www.uniden.com
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 5 ]
Main Base Unit
21.
22. volume/SELECT
23. memo/rec (record) key
(repeat/rewind) key
38 39
28
(up) key
24. volume/SELECT
(down)
key
29
30
31
32
charge
in use
25. answer on/off key
26. ringer key
27. Base charging contacts
28. Base antenna
21
22
memo
rec
23
volume SELECT
24
33
34
35
36
25
26
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
29. charge/in use LED
mic
30.
31.
32.
(play/stop) key
(skip/fast forward) key
(delete) key
37
27
33. MENU/CLOCK key
34. greeting key
35. find hs key
Extra Charging Cradle (for Second Handset)
36. SET key
42
37. mic (microphone)
38. DC IN 9V jack
40
41
39. Telephone line jack
40. Charging contacts
41. Charge LED
42. DC IN 9V jack
[ 6 ]
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Installing the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery packs into both handsets
C. Connect the main base unit and charging cradle
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
A. Choose the best location
When choosing a location for your new phone, here are some important guidelines
you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid television sets and other
electronic equipment
Avoid microwave ovens
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet
(one which is not connected to a switch).
• The handsets and the main base should be kept away from sources of electrical
noise such as motors, microwave ovens, and fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
www.uniden.com
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 7 ]
B. Install the rechargeable battery packs into both handsets
Both handsets are powered by a rechargeable battery packs.
The battery recharges automatically when the handset is
placed in the main base unit or charging cradle.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
• For optimum
performance use only
the Uniden BT-800
rechargeable battery
pack supplied with
your phone.
2) Plug the battery pack connector (red & black wires) into the
jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery, and listen for
a click to insure connection.
3) Make sure you have a good connection by slightly pulling on
the battery wires. If the connection is secure, the battery
jack will remain in place.
• Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
Monday through Friday
from 8:00 a.m. to 5:00
p.m. or online at
[ 8 ]
GETTING STARTED
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order to
save power. If the phone is not in use, Low Battery flashes
on the LCD and none of the keys will operate.
If the phone is in use, Low Battery flashes and the handset
beeps. Complete your call as quickly as possible and return the
handset to either cradle for charging.
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period of
time. For optimum
performance, be sure
to return the handset
to either cradle after
a telephone call.
The last number dialed in the redial memory, the Menu display options, the names and
the numbers stored in the memory locations or CID list are retained for up to 30 minutes
while you replace the battery pack.
• Talk Mode -
Cleaning the battery charging contacts
The handset is off either
cradle and the talk/flash
key has been pressed,
enabling a dial tone.
To maintain a good charge, it is important to clean the
charging contacts on the handsets, main base unit and
charging cradle once a month. Using water only, dampen
a cloth to clean the charging contacts. Then make sure
to go back over the charging contacts with a dry cloth
before returning the handsets to the main base unit or
charging cradle to charge.
• Standby Mode -
The handset may be sitting
in or off either charging
cradle but is NOT in use.
The talk/flash key has not
been pressed and there is
no dial tone.
Do not use paint thinner, benzene, alcohol, or other chemical products.
Doing so may discolor the surface of the telephone and damage the finish.
www.uniden.com
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 9 ]
C. Connect the main base unit and charging cradle
1) Connect each AC adapter to the DC IN 9V
jack and to each standard 120V AC wall
outlet.
Use only the supplied AD-
314 AC adapter for the
main base and AD-310 for
the charging cradle. Do
not use any other AC
adapter.
2) Place one handset in the main base unit
and the other in the charging cradle.
3) Make sure that the charge/in use and
charge LED illuminate. If the LED does
not illuminate, check to see that the AC
adapter is plugged in and that the
handset makes good contact with the
cradle’s charging contacts.
4) Place the handset in the main base unit and one
handset in the charging cradle for 15-20 hours without
interruption. The main base or charging cradle unit’s
LED light (labeled charge/in use or charge)
illuminates once the handset is placed in the main
base or charging cradle. The LED light will illuminate
whether the battery pack is connected or not.
[ 10 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
If the main base charge/in use or charging cradle charge LED
light does not illuminate:
• Check to see if the AC adapter is plugged into both cradles
and the electrical wall outlet properly. (Use only the
supplied AC adapters. Do not use any other AC adapters.)
• Check to see if both handsets are sitting correctly in each
cradle and making good contact with each cradles charging
contacts.
• Place the handsets in
the main base and
charging cradle with
the keypad facing
forward for charging.
• Place the power cord
where it does not
create a trip hazard
or where it could
become chafed and
create a fire or
5) Once the handset battery pack is fully charged, connect the
telephone line cord to the TEL LINE jack and to a telephone
outlet.
If your telephone outlet isn't modular,
contact your telephone company
for assistance.
electrical hazard.
Modular
www.uniden.com
GETTING STARTED [ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Main Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1
DO NOT use an AC
outlet controlled by
a wall switch.
1) Snap the wall mount adapter into the notches on
the bottom of the base.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded wiring
channel as shown.
4) Plug the AC adapter into a standard 120V AC
Wall plate
wall outlet.
7
5) Plug the telephone line cord into the TEL LINE jack.
6
Wrap the cord inside the molded wiring channel as
shown.
7
3
AC
6) Plug the telephone line cord into the telephone
adapter
5
AC outlet
outlet.
4
2
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
[ 12 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable
for the wall material where the main base unit will be placed.
1) Insert two mounting screws into the wall (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw heads
for mounting the phone.
2) Refer to steps 1 through 7 on page 12 to mount the telephone.
www.uniden.com
GETTING STARTED [ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Register Handsets to the Main Base Before Using!
Whichever handset you choose to charge in the main base will automatically register
to the base.
The second handset (charging in the extra charging cradle) MUST also be registered
to the main base before use. Follow the steps below to register the second handset.
• When you charge the
handsets, Caller ID
summary screen and
the name of the
handset, HS1 appears.
If HS2appears, you
are charging the
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the main base. The
charge/in use LED light on the main base will begin to flash, indicating that the
registration is taking place.
handset No. 2.
3) Wait for at least 5 seconds before removing the handset from the main base.
4) Once both handsets are registered, it doesn’t matter which handset is placed in
the main base or the charging cradle.
• The charging cradle
can be used to charge
either handset.
[ 14 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
When to Re-register Handsets
You’ll need to re-register the handsets if any of the following things occur. Follow
steps on page 14 to re-register the handset.
1) Each time the digital security code is changed, you will need to re-register the
second handset. Refer to page 56 for details regarding the Digital Security Code.
2) When the main base is without power for more than 30 minutes, both handsets
will need to be re-registered.
3) If the second handset’s battery becomes very low, the handset must be recharged
for 15-20 hours and re-registered to the main base unit.
• Make sure to return the
handsets to the charg-
ing cradles after each
phone call.
• If you transfer the call
and it is not picked up
after 5 minutes, the
call will be
Call Transfer Feature
disconnected.
Your cordless phone allows you to transfer outside calls from handset to handset,
only one handset at a time can talk with an outside caller. The second handset
cannot go off hook to listen to conversations or make an outgoing call while the
other handset is in use.
To transfer a call
1) During a call, press delete/transfer. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone stops.
To cancel the transfer and return to the caller, press delete/transfer or talk/flash on
the handset.
To receive a transfer call (from the second handset)
Pick up the handset from the base (when AutoTalk is set to on),
or pick up the handset and press talk/flash to answer the
transferred call. Additionally, you can answer the transferred call
by pressing any number key,
/tone/
or #/
(when AutoTalk is set to on).
www.uniden.com
GETTING STARTED [ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Menu Display Options
There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code,
Dial Mode and Language.
CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set
by using Handset 2, you will not see these options listed on the LCD screen.
(Handset 1 shows HS1 in the display while the phone is charging.)
Setting AutoTalk and CIDCW
The cordless phone
features include
1) Press and hold call id/menu. The following screen appears.
2) Use vol/
/
or vol/
/
to move the pointer to the
TM
AutoTalk and
TM
selection that you would like to change.
AutoStandby .
Press select/channel to toggle between On and Off.
AutoStandby allows you
to hang up by simply
returning the handset to
the main base or
3) Press end and return the handset to the main base unit to
complete the setting. The handset returns to standby mode.
chaging cradle.
AutoTalk allows you to answer the phone without pressing the talk/flash key.
If the phone rings when AutoTalk is on, simply remove the handset from either
charging cradle and the phone automatically answers the call. If the phone rings
when AutoTalk is off, you must press talk/flash to answer the call.
Entering your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
[ 16 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
1) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
2) Press vol/
/
to move the pointer to Area Code.
3) Press select/channel. If an area code has been already stored,
the phone displays it.
4) Use the number keys (0 - 9) to enter a 3-digit area code. To change a
previously–entered area code, use the delete/transfer to backspace.
5) Press select/channel. A confirmation tone sounds and the displayed area code is
entered.
6) Press end to complete the setting. The handset returns to standby mode.
Choosing the dialing mode
Most phone systems use tone dialing. However, some phone systems (such as those
in rural areas) still use pulse dialing. Your Uniden phone supports both tone and
pulse dialing. The default setting is tone dialing. If your dialing system uses pulse
dialing, follow the steps below to change the dialing mode:
www.uniden.com
GETTING STARTED [ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
1) Be sure you are using handset 1. Handset 1 shows HS1 in its display while the
phone is charging.
2) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
• If you are not sure of
your dialing system,
set for tone dialing
and make a trial call.
If the call connects,
leave the setting as is.
Otherwise, set for
3) Press vol/
/
three times to select Dial.
4) Press select/channel to set the phone to Pulse dialing.
5) Press end and return the handset to the main base unit to complete the setting.
The handset returns to standby mode.
pulse dialing.
• If your phone system
requires pulse dialing
and you need to send
the DTMF tones during
a call, you can
temporarily switch over
to tone dialing. (Refer
to "Tone Dialing Switch
Over" on page 21.)
Setting the language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold
call id/menu. The following screen appears.
2) Use vol/
/
to move the pointer to Language.
3) Press select/channel to select Eng, Fr. or Esp.
4) Press end or return the handset to the main base unit or charging cradle to
complete the setting. The handset returns to standby mode.
[ 18 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Making and Receiving Calls
Handset on Main Base or Charging Cradle Handset off Main Base or Charging Cradle
Remove the handset (AutoTalk:
on) or remove the handset and
press talk/flash (AutoTalk: off).
Press talk/flash (AutoTalk: off),
or press talk/flash, /tone/
Receiving
a call
,
Refer to page 16
"Setting Menu Display
Options" to turn On the
AutoTalk feature if
desired.
#/
or any number key
(AutoTalk: on).
1) Remove the handset.
2) Press talk/flash.
3) Listen for the dial tone.
4) Dial the number.
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
Making
a call
OR
OR
1) Remove the handset.
Dial the number, then press
talk/flash.
2) Dial the number, then press
talk/flash
.
Press end or return the handset to the main base or charging cradle
(AutoStandby).
Hanging up
1) Remove the handset.
2) Press talk/flash.
3) Listen for the dial tone.
4) Press redial/pause.
1) Press talk/flash.
2) Listen for the dial tone.
3) Press redial/pause.
Redialing
OR
OR
1) Remove the handset.
2) Press redial/pause, then
press talk/flash.
Press redial/pause, then press
talk/flash.
www.uniden.com
BASICS [ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Handset Ringer and Earpiece Volume
Handset ringer tone and volume
Press the volume up key or volume down key (labeled as
vol/
/
or vol/
/
) in standby mode to select one of five
ringer tone/volume combinations.
Earpiece volume
To change the earpiece volume, press vol/
/
or vol/
/
keys during a call. This setting will remain in effect after the
telephone call has ended.
Temporarily Mute Ringer
If the handset is off the base, simply press end to temporarily mute the incoming
ring. The ringer will sound with the next incoming call.
[ 20 ] BASICS
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use auto-
mated systems, such as telephone bank tellers, telephone
prescription refills, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call
connects, press the
/tone/ . Enter the desired number. These digits will be sent
as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing
mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your main base unit,
noise increases. If you pass the range limits of the main base unit, your call will
terminate within 1 minute.
www.uniden.com
BASICS [ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone´s channel for clear operation. This function works only when the phone is
in use. Press select/channel. Scanning appears on the display, indicating the
phone is changing to another channel. For more information on interference, refer to
page 65 under "Precautions".
TM
The UltraClear Plus
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
charge
in use
Find Handsets
To locate the handsets, press find hs on the main base. The
memo
rec
handset beeps for 60 seconds.
volume SELECT
The paging tone stops when you press any key on either handset,
when you press find hs on the base, or when you receive an
incoming call.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
conversations.
mic
Using Call Waiting
If you have Call Waiting service, you can receive calls while
on the line.
1) If a call comes in while you are on the phone, you will
hear a call waiting tone. If you have CIDCW activated, you
will see the name and number of the incoming caller.
2) Press talk/flash to accept the waiting call. After a short
pause, you will hear the new caller.
3) To return to the original caller, press talk/flash again.
[ 22 ] BASICS
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Phone Numbers and Names in Speed Dial Memory
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 10 names/numbers in each handset.
1) With the phone in standby mode, press memory. Select
Select Memory
01
02 JOHN DOE
Memory is displayed.
In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the main
base or charging cradle,
the phone will return to
standby mode also.
2) Enter (0 - 9) to select the speed dial number where you
would like to store this entry. You can also scroll through the
list with vol/
/
and vol/
/
.
01:(Empty)
Press Select
to edit
3) Press memory or select/channel.
4) Press memory or select/channel. The Store Name screen
appears and a cursor flashes indicating that the display is
ready for the name to be entered.
Store Name
If the selected speed dial number is already assigned, the
Edit screen appears. You can select Edit to edit this entry,
select Delete to delete this entry, or select Go Back to
choose another speed dial number.
Edit Memory01
Delete Memory01
Go Back
5) Enter a name according to the instructions below. If no name is required, go to
step 6.
• The name can be up to 13 characters.
• See the "Steps for Entering Names and Special Characters" (see page 25).
• Use #/
and
/tone/
to move the cursor to the desired location.
• Use delete/transfer to delete characters as needed.
• Press and hold delete/transfer to delete all the characters.
www.uniden.com
MEMORY DIALING [ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
6) Press memory or select/channel. Store Numberis
displayed.
Store Number
The cursor flashes indicating that the display is ready for
the number to be entered.
7) Use the keypad to enter the phone number; each number
can be up to 20 digits.
If you need the phone to pause during the dialing sequence,
press redial/pause to insert a two-second delay between
the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a P
for every pause.
Store Number
8007303456
8) Press memory or select/channel. You will hear a
confirmation tone, and the following screen appears.
Memory storage is complete.
Memory01 Stored
After about 2 seconds, the screen displays the list of the
entries in Speed Dial Memory.
01 Movies
02 JOHN DOE
03 MOM AND DAD
9) Press end to exit memory setup mode. The phone returns to
standby.
[ 24 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: Upper case letters first, lower case letters next and finally the number
corresponding to the key.
If the next character
uses the same number
key, you must press
If you make a mistake while entering a name
Use
/tone/
or #/
to move the cursor to the incorrect character.
to move the
#/
Press delete/transfer to erase the wrong character, then enter the correct character.
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
To delete all characters, press and hold delete/transfer.
For example, to enter Movies.
1) Press 6 then press #/
2) Press 6 six times.
3) Press 8 six times.
4) Press 4 six times.
5) Press 3 five times.
6) Press 7 eight times.
to move the cursor to the right.
Number of times key is pressed
keys
1
2
3
4
5
6
7
8
9
1
A
D
G
J
M
P
T
W
*
1
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
2abc
3def
4
4ghi
5jkl
5
6mno
6
r
s
7
9
7pqrs
8tuv
8
y
z
0
9wxyz
0oper
(blank)
www.uniden.com
MEMORY DIALING [ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Calls from Speed Dial Memory
Memory dialing from Standby Mode
1) Press memory. The handset displays your programmed speed
dial memory.
Select Memory
01 Movies
02 JOHN DOE
2) Enter the number (0 - 9), or press vol/
/
or vol/
/
to select the speed dial number you would like to dial.
3) Press talk/flash. Connecting changes to Talk, and the
volume setting appears on the display. Then the displayed
number is dialed.
To cancel speed dialing, press end. The handset returns to standby mode.
[ 26 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Speed dialing from Talk Mode
1) Press talk/flash. Connecting
appears.
Connecting
Talk
Volume High
2) After the display changes from Connecting to Talk, press memory.
3) Enter a number (0 - 9), or press vol/
/
or vol/
/
Select Memory
01 Movies
02 JOHN DOE
to select the memory location of the desired phone number.
If you press select/channel, the number is dialed.
4) To hang up, press end.
Talk 0:35
8007303456
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank and
are prompted to enter the account number, press memory and select the location
number where the special number has been stored. Then press select/channel.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names in Speed Dial Memory" on page 23.)
www.uniden.com
MEMORY DIALING [ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Stored Name and/or Phone Number
1) With the phone in standby mode, press memory. Select
Select Memory
01 Movies
02 JOHN DOE
Memory is displayed.
2) Enter (0 - 9) to select the speed dial number where you
01:Movies
8007303456
would like to edit this entry. You can also scroll through
the list with the vol/
/
and vol/
/
. Press memory
or select/channel.
Edit Memory01
Delete Memory01
Go Back
3) Press memory or select/channel again.
The following screen appears with the memory location
number that you have selected.
4) Press vol/
/
or vol/
/
to select Edit MemoryXX,
then press memory or select/channel. The following screen
appears. The cursor flashes indicating that the display is
ready for the name to be edited. When a name has not
been stored, the cursor appears at the beginning of the
second line.
Store Name
Movies
5) Use the number keys,
/tone/ , #/ , or delete/transfer
to edit the name. (See page 25.) To edit only the phone
number, skip this step.
Store Number
8007303456
6) Press memory or select/channel. The following screen
appears.
The cursor flashes indicating that the display is ready for
the number to be edited.
[ 28 ] MEMORY DIALING
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
7) Use the number key,
/tone/ , #/ , redial/pause or
delete/transfer to edit the phone number. The phone number cannot
exceed 20 digits (see page 24).
If you don´t want to change the phone number, skip this step.
8) Press memory or select/channel. If you changed either
Replace Memory?
Yes
No
name or phone number, a confirmation display shows up. If
it is correct, press vol/
/
to select Yes and press
select/channel. You hear a confirmation tone, and the
following screen appears. The memory storage is complete.
For example, if you edit a name and number into memory
location number 01, the display shows Memory01 Stored.
After about 2 seconds, the screen displays the list of the
entries in Speed Dial Memory.
Memory01 Stored
01 Movies
02 JOHN DOE
03 MOM AND DAD
9) Press end to return to standby mode.
www.uniden.com
MEMORY DIALING [ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing a Stored Name and Phone Number
Select Memory
01 Movies
02 JOHN DOE
1) With the phone in standby mode, press memory. Select
Memory is displayed.
2) Enter a number (0 - 9), or press vol/
/
or vol/
/
to select the memory location you would like to erase.
02:JOHN DOE
5452930
3) Press memory or select/channel.
4) Press memory or select/channel again.
The Edit screen appears with the memory location number
that you have selected in the display.
Edit Memory02
Delete Memory02
Go Back
5) Press vol/
/
to move the pointer down to Delete
MemoryXX.
6) Press memory or select/channel. The Delete MemoryXX?
Delete Memory02?
Yes
No
screen appears.
7) Press vol/
/
to move the pointer to Yes.
8) Press select/channel or delete/transfer.
You hear a confirmation tone, and the MemoryXX Deleted
screen appears.
Memory02 Deleted
9) After about 2 seconds, the display returns to the
Select Memory screen. You may delete the information in
another memory location (return to step 2) or press end to
return to standby mode.
01 Movies
02
03 MOM AND DAD
[ 30 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
RocketDial
You can store your most frequently-called number in the RocketDial
location. The RocketDial allows you to dial a number with one key
press. (There is no need to press talk/flash. The phone will
automatically dial the number stored.) If you subscribe to voice
mail service, you can store your access number in this location.
call id/menu
RocketDial
vol
• The number stored
in RocketDial is
independent from
the numbers stored
in Speed Dial
Storing and Editing the RocketDial
Store Number
Memory.
1) When the phone is in standby mode, press and hold
RocketDial. The following display appears.
• If the RocketDial does
not have a stored
number, the handset
will beep rapidly and
the phone will not
dial.
If the Edit screen appears, there is a number already stored.
Edit Number
Delete Number
Go Back
Press vol/
/
or vol/
/
to select Edit Number, then
press select/channel.
Store Number
800
2) Store the number by following step 7 under "Storing Phone
Numbers and Names in Speed Dial Memory" on page 24.
3) Press select/channel.
You hear a confirmation tone, and the Number Stored
screen appears. Memory storage is complete.
Number Stored
Making Calls with the RocketDial
When the phone is in standby mode, simply press RocketDial. The number stored in
the RocketDial memory location is instantly dialed.
www.uniden.com
ROCKETDIAL [ 31 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting the RocketDial
1) When the phone is in standby mode, press and hold
Edit Number
Delete Number
Go Back
RocketDial. The following display appears.
2) Press vol/
3) Press select/channel. The following display appears.
4) Press vol/ to move the pointer to Yes.
/
or vol/
/
to select Delete Number.
Delete Number?
Yes
No
/
5) Press select/channel or delete/transfer.
You hear a confirmation tone, and the following display
appears. After about 2 seconds, the handset returns to
standby mode.
Number Deleted
[ 32 ] ROCKETDIAL
www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID services through your local telephone provider
to use these features. When the telephone rings, the Caller ID feature allows you
to view the caller´s name, phone number, date and time of call. With CIDCW (Caller
ID on Call Waiting), you will hear a Call Waiting tone while you are on a call, and
the Caller ID data is displayed. To accept the waiting call, press talk/flash.
Additionally, you can dial a number stored in the Caller ID list or save data to your
Memory dial list.
• If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
When the Telephone Rings
When the Caller ID message is received, the display shows the caller´s phone number
along with the date and time. The incoming call information is stored in the Caller
ID record. If the Caller ID service includes the caller´s name, the caller´s name
appears on the display (up to 15 letters).
• When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone
number and name
do not appear.
(This includes
The date and
time received
5/11 12:30PM
Jane Smith
214-555-1234
Caller's name
Caller's phone number
You may receive any one of the following messages:
When invalid data is received
Incomplete Data
international calls.)
When a private name is received
When a private number is received
When a unknown name is received
Private Name
Private Number
Unknown Name
• When the call is via
a private branch
exchange (PBX), the
caller´s phone
number and name
may not appear.
When a unknown number is received Unknown Number
Data errors appear as
www.uniden.com
.
CALLER ID FEATURES [ 33 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 messages (Caller ID
names/numbers) - even unanswered calls.
• In Caller ID operation,
if no key is pressed for
more than 30 seconds,
an error tone sounds
and the handset
1) Press call id/menu.
Caller ID
New :01
Total:02
The summary screen appears. The screen shows the number
of new messages and total messages.
returns to standby
mode.
2) Press vol/
/
to display the latest Caller ID message.
5/17 12:30PM 03
Jane Smith
214-555-1234
• If a call comes in via a
telephone system that
does not offer Caller
ID service, no
3) Press vol/
/
to see the next message. Or press vol/
/
key to see the previous message.
information is stored.
4) Press end to return to standby mode.
• Each message can be
up to 15 characters
for the phone number
and the name.
• The number of calls
from the same Caller
ID appears next to
the received time.
Once you view the
new message, the
number will be
cleared and disappear.
[ 34 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Deleting Information from the Caller ID List
The cordless phone stores up to 30 messages (Caller ID names/numbers) in each
handset. If the phone receives the 31st message, the oldest one in the list is
automatically deleted. Caller ID data can also be deleted manually.
• While using the
Delete All?or
Delete Message?
screen, if no key is
pressed for more than
30 seconds, an error
tone sounds, and the
telephone returns
to standby mode.
Deleting a Caller ID message
1) Press call id/menu. Display the message to be deleted from
5/17 12:30PM 03
Jane Smith
214-555-1234
the Caller ID list by pressing vol/
/
or vol/
/
.
2) Press delete/transfer.
Delete Message?
Yes
No
3) Press vol/
/
or vol/
/
to select Yes or No.
• If you get an
4) Press select/channel or delete/transfer.
incoming call or page,
the deleting operation
is canceled, and you
can answer the call or
page.
When the pointer is at Yes:
You hear a confirmation tone and the Caller ID message is deleted. The next
Caller ID message is then displayed.
When the pointer is at No:
The display returns to the Caller ID message.
Deleting all Caller ID names/numbers
1) With the phone in standby mode, press call id/menu.
Caller ID
New :01
Total:02
2) Press delete/transfer.
www.uniden.com
CALLER ID FEATURES [ 35 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press vol/
/
or vol/
/
to select Yes or No.
Delete All?
Yes
No
4) Press select/channel or delete/transfer.
When the pointer is at Yes:
You hear a confirmation tone and all stored Caller ID
messages are deleted.
Caller ID
Total:00
When the pointer is at No:
The display returns to the summary screen.
Caller ID
New :01
Total:02
[ 36 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Making a Call from the Caller ID List
You can place a call from the Caller ID list.
1) Press call id/menu. Select the phone number that you
5/17 12:30PM 03
Jane Smith
214-555-1234
want to dial by pressing vol/
/
or vol/
/
.
2) To add a "1" to the front of the displayed Caller ID number
(for a long distance call), press 1. To delete a "1" from the
front of the displayed caller ID number, press 1 again.
• You cannot make a
call from the Caller ID
list if your cordless
telephone is
connected to a
private branch
Talk
2145551234
3) Press talk/flash. The displayed phone number dials
automatically.
exchange (PBX).
You can place a call from Talk Mode. Press talk/flash, then press
call id/menu. Select the phone number that you want to dial by
• When a long distance
call has been set, 1
appears in the
pressing vol/
/
or vol/
/
, then press select/channel.
The displayed phone number will be dialed.
display.
www.uniden.com
CALLER ID FEATURES [ 37 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID Messages in Memory Dialing
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in
memory dialing.
1) Press call id/menu, then press vol/
/
or vol/
/
to
You cannot store a
Caller ID message if no
phone number appears
in the message.
5/17 12:30PM 03
Jane Smith
214-555-1234
select the desired phone number from the Caller ID list.
2) Press memory.
Select Memory
01
02 JOHN DOE
3) Enter a number (0 - 9), or press vol/
/
or vol/
/
to select the memory location to be stored.
4) Press select/channel.
You hear a confirmation tone, and the number is stored
in memory. The display returns to the Caller ID list.
5/17 12:30PM 03
Jane Smith
214-555-1234
If a number has already been stored in the selected memory
number location, a confirmation screen is displayed.
Replace Memory?
Yes
No
Press vol/
/
to select Yes. Press select/channel to
overwrite. The display returns to the Caller ID list.
[ 38 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
The Integrated Answering Device
The cordless phone has a built-in answering system that answers and records
incoming calls. You can also use your answering system to record a conversation,
leave a voice memo message, or to announce a special outgoing message to callers
when you're away from your phone.
Features
• Digital Tapeless Recording
• Up to 13 Minutes of Recording Time
• Call Screening
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Personal or Pre-recorded Outgoing
• Conversation Recording
• Voice Memo
Message
• Voice Prompts (English, French or
Spanish)
• Selectable ringer options (high, low or
off)
Digital Tapeless Recording allows you to quickly review, save, or delete the messages
you choose. You will never have to worry about a tape wearing out, jamming, or
resetting improperly.
The Integrated Answering System is easy and convenient to use, but please read
through all of the instructions carefully.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 39 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Answering System On/Off
1) To turn the answering system on, press answer
on/off. The system will announce “Answering system
is on.” The current greeting message will be played,
and you will hear a confirmation tone. The message
counter displays the number of messages stored in
memory. If the display flashes, then there are new
messages waiting for you.
charge
in use
memo
rec
volume SELECT
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
2) To turn the answering system off, press answer
on/off again. After the announcement “Answering
system is off,” the message counter display will no
longer be illuminated. To turn the answering system
back on, press answer on/off.
mic
[ 40 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Setting Up Your Answering System
Answering System Setting
To set the following six functions you must enter the menu mode.
• To scroll through the menu options, repeatedly press
MENU/CLOCK in standby mode. The system returns to
standby after the last menu option. You hear a
confirmation tone to indicate standby mode.
• If any of the following occurs during menu setup, the
system returns to standby. Start over the procedure of the
setting.
• For your convenience,
voice prompts will
guide you through the
menu mode.
MENU/CLOCK
"Time"
MENU/CLOCK
"Security Code"
MENU/CLOCK
• After the setting, press
"Ring Time"
the
key to exit
the menu mode, or
MENU/CLOCK to move
to the next menu
option.
MENU/CLOCK
"Record Time"
-Press talk/flash
MENU/CLOCK
-Press the
key
"Message Alert"
-Receive a call
MENU/CLOCK
• If the system remains idle for about 5 seconds after the
announcement, the system returns to standby. Once
"Language"
MENU/CLOCK
volume/SELECT/
idle time is extended to 10 seconds.
or volume/SELECT/
is pressed, the
Return to standby
with tone sound.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 41 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) Press MENU/CLOCK in standby mode.
The system announces “Time,” the current time and
the instructions for setting the time.
Press and hold
volume/SELECT/ or
volume/SELECT/ to
quickly scroll through
the numbers on the
display.
charge
in use
2) Press volume/SELECT/
or volume/SELECT/ until
memo
rec
the correct day is announced. The numbers [
]
volume SELECT
through [ ] are displayed on the base.
answer on/off
ringer
greeting
find hs
3) Press SET to select the day.
MENU/CLOCK
SET
4) Press volume/SELECT/
or volume/SELECT/
until
mic
you hear the correct hour setting. The numbers [
]
through [ ] are displayed on the base as each hour
is announced.
5) Press SET to select the hour.
6) Press volume/SELECT/
you hear the correct minute setting. The numbers
] through [ ] are displayed on the base as
each minute is announced.
or volume/SELECT/
until
[
[ 42 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
7) Press SET to select the minute.
8) Press volume/SELECT/ or volume/SELECT/
until you hear the correct AM or
PM setting. The message counter displays [ ] or [ ].
9) Press SET to select the AM/PM setting.
You hear a confirmation tone, then the announcement “Time” and the time and day
are announced for your review. After a few seconds, the system announces “To set
security code, press menu again.”
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit
Personal Identification Number (PIN) code (
following steps:
). To select a PIN, perform the
1) Press MENU/CLOCK twice in standby mode.
The system announces “Security code,” and the current PIN code is announced as
it is displayed on the base. Then the system announces the instructions for
setting the PIN code.
The PIN code is set to
"80" when you purchase
the cordless phone.
2) Press volume/SELECT/
or volume/SELECT/
until the desired number appears.
3) Press SET to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” followed by the new PIN code. After a few seconds,
the system announces “To set ring time, press menu again.”
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 43 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. Setting [
] (Toll Saver), the answering system
picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can
hang up after the second ring to avoid billing charges.
1) Press MENU/CLOCK three times in standby mode.
You hear “Ring time” and the current ring time ([ ] 2, [ ] 4, [ ] 6, [
Toll saver), and it is displayed on the base. Then you hear the instructions for
setting the ring time.
]
2) Press volume/SELECT/
or volume/SELECT/
until the desired ring time
appears.
3) Press SET to select the new ring time. You hear a confirmation tone, then the
announcement “Ring time” followed by the new ring time. After a few seconds,
the system announces “To set record time, press menu again.”
[ 44 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Selecting the Message Record Time
You have three record time options. The options "1 minute" or "4 minutes" set the
duration for recording the incoming messages. "Announce only" answers the call
with the preset greeting or your personal greeting but prevents the caller from
leaving a message.
After setting the
Announce only feature,
you may want to change
your outgoing message
not to prompt the caller
to leave a message.
However, the prerecorded
message changes
1) Press MENU/CLOCK four times in standby mode.
You hear “Record time” and the current recording time ([ ] 1 minute, [ ] 4
minutes, [ ] Announce only, No recording), and it is displayed on the base.
Then you hear the instructions for setting the record time.
2) Press volume/SELECT/ or volume/SELECT/ until the desired time appears.
automatically.
3) Press SET to select the new recording time. You will hear a confirmation tone,
then the announcement “Record time” followed by the new recording time. After a
few seconds, the system announces “To set message alert, press menu again.”
MAnnounce only feature
The announce only feature plays a prerecorded outgoing message “Hello, no one is
available to take your call. Please call again.” It will not allow the caller to leave a
message. To set “Announce only,” follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press
greeting when the outgoing message is played. If you want to use your own greeting
or want to omit the prompt “to leave a message from your greeting,” refer to
“Recording a personal outgoing message (Greeting)” on page 47.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 45 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
1) Press MENU/CLOCK five times in standby mode.
You hear “Message alert” and the current setting ([
] Off or [
] On), and it
is displayed on the base. Then you hear the instructions for setting the Message
Alert.
2) Press volume/SELECT/
or volume/SELECT/
to make your selection.
3) Press SET to select the new setting. You hear a confirmation tone, then the
announcement “Message alert” followed by the current setting you have selected.
After a few seconds, the system announces “To set language, press menu again.”
When the first new message is received, the alert tone will begin to sound.
Turning the Message Alert tone off by pressing any key.
1) To quickly turn Message Alert tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
Turning Message Alert tone off when you’re away from your phone.
1) When all new messages are played back using the remote playback feature (see
page 54) the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.
[ 46 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Selecting the Language
The answering system voice announcements can be heard in English, French or
Spanish. To choose the language of the answering system voice announcements:
1) Press MENU/CLOCK six times in standby mode.
You hear the announcement “Language, English” followed by the instructions for
setting the language. The current setting ([ ], [ ] or [ ]) appears on the
base.
2) Press volume/SELECT/
or volume/SELECT/
to select the desired language.
3) Press SET. A confirmation tone is heard along with the setting in the language
selected.
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
MPreset message
• You can record a
greeting more than 2
seconds up to 30
seconds long.
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
See "Selecting the Message Record Time," page 45 on how to set the announce only feature.
• Position yourself as
near to the base as
possible and speak
clearly when recording
your outgoing message.
MRecording a personal outgoing message (Greeting)
1) Press and hold greeting in standby mode.
You will hear the announcement “Record greeting” and a confirmation tone.
[
] flashes on the message counter.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 47 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Start recording your message. You have 30 seconds, and the message counter
starts to count down [ ] to [ ] every second.
3) When you are finished recording your greeting, press greeting, the
key or
SET. You will hear a confirmation tone, and then your greeting plays back for you.
MChoosing between the two outgoing messages
Press greeting in standby mode. Then press greeting again when the outgoing
message is played. This switches between the prerecorded greeting and the personal
greeting. After the greeting finishes playing, you will hear a confirmation tone is
heard.
To delete the personal Greeting, press the
key during the announcement and the system
announces “Greeting has been deleted.”
Setting the Base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other
two are volume levels.
1) Press ringer.
You hear the ringer at the current volume level
charge
in use
([
] High, [
] Low, [
] off) (if you set the
When you have set the
base ringer to off and
the handset is on the
base, you will still hear
the ringer from the
handset.
base ringer volume to off, “Ringer off” is
announced) and it is displayed on the base.
memo
rec
volume SELECT
2) Press ringer repeatedly until the desired ringer option
appears.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
3) The system displays the new ringer volume.
[ 48 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Temporarily Mute the Base Ringer
Press the
key to temporarily mute the incoming ring. The ringer will sound with
the next incoming call.
Adjusting the Speaker Volume Level
When you press
You can adjust the volume of the base speaker by pressing volume/SELECT/
or
volume/SELECT/
or volume/SELECT/
0, an error tone sounds.
at 9
at
volume/SELECT/
volume/SELECT/
on the base. Press volume/SELECT/
for louder or
for softer while the base speaker is being used except for menu
mode. The numbers [ ]- [ ] are displayed on the base indicating the volume
levels. [ ] being the softest and [ ] being the loudest.
Using Your Answering System
The message counter displays the number of messages stored in memory. If the
display flashes, then there are new messages waiting for you. The flashing
number represents the number of new messages, not total messages. The cordless
phone is designed to play your new messages first. After you play all your new
messages, you can then play your old messages.
When the answering system is full, [
] is displayed on the base, and the system announces "No
remaining time." You should delete some messages so that the system can record new messages.
(Refer to "Deleting a Message" on page 52.)
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 49 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing your messages
1) Press the
key in standby mode.
The system announces the number of new and old
messages. The LED displays the number of new
messages, and the number flashes. The day and time
that each message was received is announced after the
message is played. The message counter displays the
number of current messages stored.
charge
in use
To stop playing your
messages, press the
key again at any time.
memo
rec
volume SELECT
When all new messages have been played, you hear a
confirmation tone and an announcement “End of
messages.” The system returns to standby.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
mic
2) After you have reviewed your new messages, you can
play your old messages by again pressing the
key.
Once you have listened to a new message, it becomes
an old message. The old messages will be played in the
order in which they were received.
Repeating a message
1) Press the
announced.
key to review your messages. The number of stored messages are
2) After a message has played for a few seconds, press the
key to replay the
message. If you have several messages, press the
return to the message you want to replay.
key repeatedly until you
[ 50 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
3) Press the
key at any time to stop reviewing messages and return to standby.
The message counter shows the number of messages stored in memory.
To quickly scroll backward through a message, press and hold the
key.
Skipping a message
1) Press the
announced.
key to review your messages. The number of messages is
2) Press the
key at anytime to skip to the next message.
Each time the
key is pressed, the system scans forward one message. If you
have several messages, press the
to play.
key repeatedly to find the message you want
3) Press the
key at any time to stop reviewing your messages and return to
standby. The message counter shows the number of messages stored in memory.
To quickly scroll forward through a message, press and hold the
key.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 51 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a Message
To maintain maximum record time, delete the old
messages.
1) Press the
key to review your messages.
charge
in use
2) Press the
to delete.
key anytime during the message
When you press the
key, you are permanently
deleting the message.
Once deleted, the message
cannot be replayed.
memo
rec
volume SELECT
3) You will hear a confirmation tone and the message
is deleted.
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
You can also delete all the messages.
1) Press the
key in standby mode.
mic
You will hear an announcement “To delete all
messages, press delete again.”
2) Press the
key again.
You will hear a confirmation tone and [ ] is
displayed on the base. All the messages are deleted.
When you try to delete all messages without first listening to your new messages, you
hear several short beeps followed by an announcement “Please playback all
messages.” This protects you from accidentally erasing messages you have not yet
reviewed.
[ 52 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Voice memo
The voice memo function allows you to record messages
(more than 2 seconds up to 4 minutes).
charge
in use
1) Press and hold memo rec in standby mode.
You hear an announcement “Record memo message” and
• The voice memo
function is completely
independent of the
greeting message.
• The voice memo
messages are recorded
as incoming messages.
memo
rec
a tone. [
] flashes on the message counter.
volume SELECT
2) Start your recording.
3) When you have finished, press the
key, memo rec
answer on/off
ringer
greeting
find hs
MENU/CLOCK
SET
or SET to stop recording. You hear a confirmation tone
and the system returns to standby.
• When the answering
mic
system is full, [
]
appears on the message
counter and recording
is terminated.
Recording a conversation
You can record up to 10 minutes of conversation while you are using your phone.
Any conversation that lasts less than 2 seconds will not be recorded.
• A recorded
conversation is treated
as a typical message
and will be added to
the stored messages.
1) During a conversation from the handset, press and hold memo rec.
The unit begins recording with a confirmation tone and [
] flashes on the
• When recording a
conversation, all
message counter.
A beep that can be heard by both parties sounds during recording.
dialing features except
for flash operation (see
“Using Call Waiting” on
page 22) are disabled.
Stop recording if you
need to enable any
other handset keys.
If you receive a call waiting tone while recording a conversation, press talk/flash to accept the
waiting call. The recording feature continues recording the new call. The original call is put on hold.
2) To stop recording, press the
key or memo rec. You hear a confirmation tone.
Transferring a call also stops recording.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 53 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote access
You can operate your answering system from a remote location using any touch-tone
telephone. Use this function to check for recorded messages, to play or delete
messages, even to record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code.
For your convenience
remote operation cards
are provided for you to
use while away from
home (located backward
of this manual).
(See "Setting a Personal Security Code (PIN)," page 43).
3) The answering system announces the current time and the number of messages
stored in memory. Then you hear "To play incoming messages, press zero two.
For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command
from the following chart:
Command
0 then 1
0 then 2
0 then 3
0 then 4
0 then 5
0 then 6
0 then 7
0 then 8
0 then 9
1 then 0
Function
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answer System Off
Help
You must enter a
command within 15
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
[ 54 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop
the recording, enter the command again.
5) After all of the instructions have played, you hear intermittent beeps indicating
that the system is in the command waiting mode. You may enter another command
at this time from the chart.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely
from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear a beep.
3) Press 0 and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming messages,
press zero two. For help, press one zero."
4) Press 0 then 6 to turn the answering system on. You hear the outgoing message
and a confirmation tone.
5) Hang up the phone and subsequent calls will be answered by the system.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [ 55 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being
activated by other equipment, the cordless phone provides AutoSecureTM
(which electronically locks your phone when each handset is in the main base or
charging cradle) and Random CodeTM digital security (which automatically selects one
of over 262,000 digital security codes for each handset and main base).
If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically the next time the battery pack is charged.
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
1) Remove the handset from the main base unit or charging cradle. Press and hold
find hs on the main base.
2) While holding find hs, place the handset in the main base unit, and leave the
handset in the main base for more than 3 seconds.
3) Remove the handset from the main base. Then place the second handset in the
main base unit and wait for more than 3 seconds. You do not need to press find
hs this time.
4) Press talk/flash on one handset. Once you make sure talk appears on the
display, press end. Then, try with the second handset. If each handset displays
talk, a new security code is set. Otherwise, return to step 1 and try again.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
[ 56 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Headset Installation
Your phone may be used with an optional headset, the Uniden HS910.
To use this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations. (Headset may be purchased by
calling the Uniden Parts Department or visiting the web site, see the QUICK
REFERENCE GUIDE included in your package.)
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the
Uniden Parts Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the
Uniden battery model and Uniden adapter model specifically designated for this product.
Caution
Power Failure
• Use only the specified Uniden battery packs.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
During the period that the power is off, you will not be able
to make or receive calls with the telephone.
Maintenance
Caution
Do not use paint thinner, benzene,
To maintain a good charge, it is important to clean the charging
contacts on the handsets, main base unit and charging cradle once a
month. Using water only, dampen a cloth to clean the charging contacts.
Then, make sure to go back over the charging contacts with a dry cloth.
alcohol, or other chemical products.
Doing so may discolor the surface of
the telephone and damage the finish.
www.uniden.com
ADDITIONAL INFORMATION [ 57 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The charge/in use or
charge LED won't
illuminate when the
handset is placed in
the main base or charging
cradle.
• Make sure the AC adapters are plugged into each charging cradle and
wall outlet.
• Make sure both handsets are properly seated in each charging cradle.
• Make sure the charging contacts on the handsets, main base and
charging cradle are clean.
The audio sounds weak
and/or scratchy.
• Move the handset and/or main base to a different location away from
metal objects or appliances and try again.
• Press select/channel to help eliminate background noise.
• Make sure that the handset is not too far from the main base.
Can't make or receive calls.
• Re-register both handsets (see page 14).
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the main base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Make sure that you are not too far from the main base.
• Check the dialing mode.
[ 58 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Symptom
Suggestion
The handset doesn't ring or • Re-register both handsets (see page 14).
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far away from the main base unit.
• Place the main base unit away from appliances or metal objects.
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn’t set to turned off.
Severe noise interference.
• Keep both handsets away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, electrical appliances, other cordless telephones and
other devices that use electricity.
• Move to another location or turn off the source of interference.
The Caller ID does not
display.
• The call was answered before the second ring. The Caller ID is displayed
between the first and second ring.
• The call was placed through a switchboard.
•
Your Caller ID service may not be active; contact your local telephone service
provider.
• Charge the handset.
Handset No.1 or No.2 is
not working.
• Make sure the battery pack is connected to the handset and fully charged.
• Re-register the non-funtional handset.
www.uniden.com
ADDITIONAL INFORMATION [ 59 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
Unavailable message is
displayed on the LCD
screen of the handset.
• Make sure the other handset is not already in use. Both handsets cannot be in
talk mode at the same time.
• Place the handset in the main base for at least 5 seconds to re-register to the
main base.
• Make sure the handset is not too far from the main base when trying to use.
The handset doesn’t
• Re-register both handsets (see page 14).
communicate with the main
base or the other handset.
No 3-way conversation.
•
Only one handset at a time can talk with an outside caller. To allow the other
handset to talk to the caller, transfer the call.
The answering system does • Make sure the the AC adapter is plugged into the base and wall outlet.
not work. • Make sure the answering system is turned on.
The answering system does • Set the record time to either the one minute or four minute option.
not record any messages.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
[ 60 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Symptom
Suggestion
After a power failure, the
outgoing message is
deleted.
• Record your personal outgoing message again. The default message should
remain.
No sound on the base unit • Adjust the speaker volume on the base unit.
speaker during call
monitoring or message
playback.
Cannot access remote call- • Make sure you're using the correct PIN code.
in features from another
touch-tone phone.
• Make sure that the touch-tone phone you're using can transmit the tone for at
least two seconds. If it cannot, you may have to use another phone to access
your messages.
If you still have a problem. • Call our customer hotline at 1-800-297-1023.
www.uniden.com
ADDITIONAL INFORMATION [ 61 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the
following steps.
Action
Case
Wipe off the liquid, and use as normal.
If the handset or base is exposed to
moisture or liquid, but liquid only
affects the exterior plastic housing.
Handset:
If moisture or liquid has entered the
plastic-housing (i.e. liquid can be
heard in the phone or liquid has
entered the handset battery
compartment or vent openings on the
base).
1. Remove the battery cover and leave it off for ventilation.
2. Remove the battery pack by disconnecting.
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
4. Once the handset is completely dry, reconnect the battery pack and the battery cover.
5. Recharge the handset’s battery pack for 20 hours before using again.
Base:
1. Disconnect the AC adapter from the main base unit, cutting off electrical power.
2. Disconnect the telephone cord from the main base unit.
3. Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
[ 62 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10° to 50°C (+14°F to +122°F)
AC Adapter Information
(For the base)
(For the charging cradle)
AD-310
120V AC 60Hz
9V DC 210 mA
AC Adapter part number:
Input Voltage:
Output Voltage:
AD-314
120V AC 60Hz
9V DC 350 mA
Battery Information
Battery part number:
Capacity:
BT-800
800 mAh, 3.6V
You can also use BT-905, but its usage time is less than BT-800.
Frequency
925.181-927.451 MHz
5739.320-5746.130 MHz
• To avoid damage to the phone use only Uniden AD-314, AD-310 and BT-800 (or BT-905 having less usage time) with your
phone.
• If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handset is
off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call.
When the operating time becomes short, even after the battery is recharged, please replace the battery.
With normal usage, the battery should last about one year.
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting
the Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday
Specifications, features, and availability of optional accessories are all subject to change without prior
notice.
www.uniden.com
ADDITIONAL INFORMATION [ 63 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
E. If the product has been dropped or the cabinet has been
Warning!
Precautions!
damaged.
The cords on this products and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Before you read anything else, please observe the following:
F. If the product exhibits a distinct change in performance.
13.Do not use the telephone to report a gas leak in the vicinity of the
leak.
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage
to the unit, DO NOT expose this unit to rain or moisture.
Important Safety Instructions
Additional Battery Safety Precautions
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
Rechargeable Nickel-Cadmium Battery Warning
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in this
equipment in any charger other than the one designed to charge
this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
1. Use only the Uniden battery pack specified in the owner’s manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the nickel-cadmium battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and keys.
The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the owner’s manual provided for this product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry
cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
•
•
•
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result
in the risk of fire or electrical shock.
10.Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12.Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
SAVE THESE INSTRUCTIONS!
•
•
•
Uniden voluntarily participates in an RBRC®
industry program to collect and recycle nickel-cadmium batteries at
the end of their useful life, when taken out of service within the
United States.
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. Your telephone compiles with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the REN to your
telephone company. Both numbers are on the main base unit.
Through the RBRC® program, Uniden makes it easy for you to drop
off the used battery at local retailers of replacement nickel-cadmium
batteries. You may also contact your local recycling center for
information on where to return the used battery. Please call 1-800-
8-BATTERY for information on Ni-Cd battery recycling in your area.
Uniden's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
NOTE:
You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful.
interference, and (2) This device must accept any interference received,
including interference that may cause undesired Operation. Privacy Of
Communications May Not Be Ensured When Using This Phone.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)
Uniden works to reduce lead content in our PVC coated cords in our
product and accessories.
[ 64 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
of radio waves which are broadcast over the open airways. Because of
the inherent physical properties of radio waves, your communications
can be received by radio receiving devices other than your own cordless
telephone unit. Consequently, any communications using your cordless
telephone may not be private.
Range
One Year Limited Warranty
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set
forth by the FCC. We have rated this phone to operate at a maximum
distance with the qualification that the range depends upon the
environment in which the telephone is used. Many factors limit range,
and it would be impossible to include all the variables in our rating.
The Maximum Range rating of this phone is meant to be used as a
means of comparison against other range claims.
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free from defects in materials
and craftsmanship with only the limitations or exclusions set out below.
Installation Considerations
Selecting a Location
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A) damaged or not
maintained as reasonable or necessary, (B) modified, altered, or used as
part of any conversion kits, subassemblies, or any configurations not
sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any conjunction with
equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as
detailed by the owner’s manual for this product.
Before choosing a location for your new phone, there are some
important guidelines you should consider:
Telephone Line Problems
•
The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which does
not have a switch to interrupt its power.)
Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the telephone
line. Also, the telephone company may make changes in facilities and
services which may affect the operation of your unit. However, your
telephone company must give adequate notice in writing prior to such
actions to allow you time for making necessary arrangements to
continue uninterrupted service.
•
•
•
Be sure there is sufficient space to fully extend the base antenna.
The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem.
If you determine that it is the cause, you must leave it disconnected
until the trouble has been corrected.
•
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
Telephone Line Outlets
There are two types of phone outlets:
Radio Interference
Modular Jack
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.
If these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem.
In addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that antenna on the unit is fully extended.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type
of jack. If you do not have modular phone jacks, contact your local
telephone company for information about their installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation
is not difficult; however, you should contact your Uniden telephone
dealer or a telephone supply store for advice about the proper adapter
or converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
Caution!
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs.
To minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR.
If interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to return
it. The Product should be shipped freight prepaid, by traceable means,
to warrantor at:
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base
More Than One Cordless Telephone
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a desk or table, wrap the power cord around the
strain relief notch on the back of the base.
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to select
a channel that provides the clearest communication.
Uniden America Corporation
Parts and Service Division
Cordless Telephone Privacy
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a
fire or other electrical hazards.
4700 Amon Carter Blvd. Fort Worth, TX 76155
(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through Friday
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by means
www.uniden.com
ADDITIONAL INFORMATION [ 65 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment
itself. The REN assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device. “Privacy of communications may not be ensured when using this telephone”.
[ 66 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
www.uniden.com
Index
A
Viewing ................................ 34
Clock ...................................... 42
Channel .................................. 22
Connection .............................. 10
P, Q
AC adapter information .............. 63
Adjusting ringer and
Personal security code (PIN code) ..43
Precautions .............................. 64
earpiece volume .................... 20
Announce only feature ................45
Answering system
Deleting a message ..................52
Playing a message....................50
Recording a conversation ..........53
Remote access ........................54
Repeating a message ................50
Skipping a message ..................51
Turning on/off ........................40
R
D
Receiving a call ........................ 19
Redialing a call ........................ 19
Remote access............................54
Ring time ..................................44
Ringer tone and volume .............. 20
RocketDial................................ 31
Dial mode ................................ 17
Digital security code .................. 56
E, F, G
Earpiece volume ........................ 20
General information.................... 63
Find handset..............................22
S
Setting menu display options ...... 16
Setting up the handset ................ 8
Speed dialing
H
B
Headset installation .................. 57
Battery pack
I, J, K, L
Editing a stored name
Information .......................... 63
Install .................................. 8
Maintenance ...................... 9, 57
Preparing and charging ............ 11
Replacement and handling ........ 57
Beltclip installation .................. 56
I.C. Notice .............................. 66
Installing the phone ....................7
Interference.............................. 65
Language ............................ 18, 47
and/or phone number .......... 28
Erasing a stored name
and phone number .............. 30
Making calls from Speed Dial
Memory ............................ 26
Storing phone
M, N, O
Maintenance ............................ 57
Making a call ............................ 19
Menu mode ................................16
Message alert ............................46
Mounting on a wall .................... 12
Outgoing message ......................47
C
numbers and names ............ 23
Caller ID
T, U, V, W, X, Y, Z
Caller ID service .................... 33
Call Waiting .......................... 22
Deleting................................ 35
Making a call ........................ 37
Technical information ................ 63
Troubleshooting ........................ 58
Warranty .................................. 65
www.uniden.com
ADDITIONAL INFORMATION [ 67 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from home
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone. 10 times until it answers.
2. During the outgoing message, 2. Press 0 and enter your PIN
Turn on the answering system remotely
Remote access away from home
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone. 10 times until it answers.
2. During the outgoing message, 2. Press 0 and enter your PIN
Turn on the answering system remotely
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help menu. The phone
stands by for you to enter a
command.
code.
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help menu. The phone
stands by for you to enter a
command.
code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from home
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone. 10 times until it answers.
2. During the outgoing message, 2. Press 0 and enter your PIN
Turn on the answering system remotely
Remote access away from home
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone. 10 times until it answers.
2. During the outgoing message, 2. Press 0 and enter your PIN
Turn on the answering system remotely
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help menu. The phone
stands by for you to enter a
command.
code.
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help menu. The phone
stands by for you to enter a
command.
code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
U
T
C
U
T
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help menu
Key
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help menu
Key
0
1
2
3
4
5
6
7
8
9
0
0
1
2
3
4
5
6
7
8
9
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
1
C
U
T
C
U
T
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help menu
Key
Task
Repeat a Message
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help menu
Key
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we´ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023
or visit our web site at www.uniden.com
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Accessibility
?
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|