Uniden Cordless Telephone DECT1588 Series User Manual

UNIDEN  
CORDLESS  
TELEPHONES  
DECT1588 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.  
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.  
from.the.actual.unit.  
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.  
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.  
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.  
Accessibility  
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.  
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.  
disabilities,.please.call.the.accessibility.voice/TTY.line:.1-800-874-9314.  
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.  
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.  
call.you.back.  
May.be.covered.under.one.or.more.of.the.following.U.S..patents:  
.
.
.
.
.
.
.
5,491,745.  
5,717,31ꢀ.  
5,8ꢀ5,161.  
5,987,330.  
6,418,ꢀ09.  
6,901,ꢀ71.  
7,ꢀ03,307.  
5,533,010.  
5,73ꢀ,355.  
5,864,619.  
6,044,ꢀ81.  
6,618,015.  
6,907,094.  
7,ꢀ06,403.  
5,574,7ꢀ7.  
5,754,407.  
5,893,034.  
6,070,08ꢀ.  
6,714,630.  
6,914,940.  
7,310,398  
5,581,598.  
5,758,ꢀ89.  
5,91ꢀ,968.  
6,076,05ꢀ.  
6,78ꢀ,098.  
6,940,867.  
5,650,790.  
5,768,345.  
5,915,ꢀꢀ7.  
6,1ꢀ5,ꢀ77.  
6,788,9ꢀ0.  
6,953,118.  
5,660,ꢀ69.  
5,787,356.  
5,9ꢀ9,598.  
6,ꢀ53,088.  
6,788,953.  
7,0ꢀ3,176.  
5,663,981.  
5,794,15ꢀ.  
5,930,7ꢀ0.  
6,314,ꢀ78.  
6,839,550.  
7,030,819.  
5,671,ꢀ48  
5,801,466  
5,960,358  
6,3ꢀ1,068  
6,889,184  
7,146,160  
Other.patents.pending.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the Phone  
Choosing the Best Location  
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:  
PLACE YOUR BASE  
TRY TO AVOID  
• Microwave ovens  
• Refrigerators  
• Fluorescent  
lighting  
• Other cordless  
telephones  
Near an AC outlet and  
a telephone wall jack.  
• Personal computers  
• Wireless LAN  
equipment  
• Areas with  
a lot of  
background  
noise  
• TVs  
• Other electronics  
• Dust  
• Excessive  
moisture  
• Shock  
• Vibration  
In a centrally-located  
open area.  
• Direct sunlight  
• Extreme temperatures  
Notes:.For.maximum.range:.  
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.  
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.  
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the Battery  
Use.only.the.Uniden.BT-1015.rechargeable.battery.pack.supplied.with.your.cordless.telephone.  
Unpack all handsets,  
battery packs, and battery  
covers. (If the battery cover  
is on the handset, press in  
on the notch and slide the  
cover off.)  
Line up the red and black wires on  
the battery pack connector with the  
sticker in the handset’s battery  
compartment.  
Push the battery pack  
connector in firmly. (You  
should hear it click into  
place.) Gently tug on the  
battery wires to make  
sure the connection is  
secure.  
RED  
BLACK  
Place the cover over the  
battery compartment  
and slide it up into  
place.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Charging the Handset  
Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.  
Connect the AC  
adapter to the  
DC IN 9V jack and  
route the cord  
Connect the AC adapter to a  
standard 120V AC wall outlet.  
DO NOT use an AC outlet  
controlled by a wall switch.  
through the molded  
wiring channel.  
Place the handset in the charging  
cradle with the display facing forward.  
What if the charge LED doesn’t light up?  
Reseat the handset; make sure the  
contacts on the bottom of the handset are  
lined up with the contacts in the cradle.  
Check the AC adapter connection.  
Make sure you are not using an outlet  
that’s controlled by a wall switch.  
Make sure that the charge  
LED illuminates when the  
handset is seated.  
Charge your handset at least 15 to 20 hours before plugging into the phone line.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Base  
To avoid risk of fire and shock, only use the Uniden PS-0008 AC adapter with the base.  
Connect the coiled cord to the left  
side of the phone and the base  
corded handset.  
Connect the AC adapter  
to the DC IN 9V jack.  
Connect the AC adapter to a  
standard 120V AC wall outlet.  
DO NOT use an AC outlet  
controlled by a wall switch.  
Route the cord  
through the molded  
wiring channel.  
Don’t put any power cord where  
it people might trip over it or step  
on it. If a power cord becomes  
chafed or worn out, it can create  
a fire or electrical hazard.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to the Phone Line  
Connect the  
telephone  
Route the cord through the  
molded wiring channel.  
cord to the  
TEL LINE jack.  
Connect the  
telephone cord  
to a telephone  
wall jack.  
What if Check TEL Line appears  
on the base or handset display?  
The telephone cord may not be  
connected correctly. Check the  
telephone cord connection.  
Telephone  
wall jack  
Telephone  
Do you have DSL or any high-speed Internet service  
delivered through your phone line?  
cord  
Try putting a DSL filter between the base and the wall  
jack. Without a filter, telephone-line-based Internet  
services can interfere with standard phones.  
DSL filter  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Testing the Connection  
Pick.up.the.handset.from.the.cradle.and.press.TALK/FLASH..You.should.hear.a.dial.tone,.and.the.display.  
should.show.Talk.  
What.if.I.can’t.hear.a.dial.tone?  
Check.the.telephone.cord.connection.on.the.base.  
What.if.the.display.doesn’t.show.Talk?.  
• Check.the.battery.pack.connection.in.the.handset.  
• Make.sure.the.battery.pack.is.fully.charged..  
• Make.sure.the.AC.adapter.cord.is.securely.connected.to.the..  
DC IN 9V jack.and.a.standard.power.outlet.  
• Try.resetting.the.handset.(see.page.59).  
Make.a.quick.test.call,.and.then.press.END.to.hang.up..  
What.if.there.is.a.lot.of.static?.  
Check.the.sources.of.interference.described.in.Choosing.the.  
Best.Location.(see.page.6):.is.the.base.near.any.of.those?  
What.if.the.call.doesn’t.go.through?  
Try.changing.the.dialing.mode.(see.the.next.section).  
Note:. Make.sure.you.can.get.a.dial.tone.on.any.accessory.handsets.that.were.packaged.with.your.phone..  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
 
Changing the dial mode  
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.  
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.  
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.  
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Global Setup.menu,.and.then.the.Dial Mode.submenu.  
3) Scroll. .to.highlight.Pulse.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.Tone.in.step.3.  
NOW YOU ARE READY TO USE YOUR PHONE!  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Expanding Your Phone  
Adding accessory handsets  
Your.phone.supports.a.total.of.six.cordless.handsets,.including.any.that.were.supplied.with.your.phone..You.can.now.  
place.a.fully-featured.cordless.handset.anywhere.AC.power.is.available.to.connect.the.charging.cradle.  
Your.phone.is.compatible.with.the.following.Uniden.DECT.6.0.accessory.handsets:.DCX150,.DCXꢀ00,.and.  
DCX300..(Please.visit.our.website.at.www.uniden.com.for.the.most.up-to-date.list.of.compatible.handsets.)  
• If.you.purchase.any.accessory.handsets.separately,.you.must.register.the.handsets.to.the.base.before.you.can.  
use.them..(Accessory.handsets.that.come.packaged.with.a.base.are.already.registered.to.that.base.)  
Registering accessory handsets  
When.charged,.registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display:  
.. ..  
To.register.an.accessory.handset:  
1) Charge.the.handset.completely..(For.the.DCX150.accessory.handset,.see.page.8.for.instructions.on.connecting.  
the.charging.cradle.and.charging.the.handset..For.a.DCXꢀ00.or.DCX300.accessory.handset,.see.the.manual.  
supplied.with.the.handset.for.instructions.on.connecting.the.charging.cradle.and.charging.the.handset.)  
ꢀ) With.the.phone.in.standby,.press.MENU/SELECT.on.the.base..  
3) Move.the.cursor.to.select.the.Register Handset.menu,.and.then.press.MENU/SELECT..Handset.Registering.will.  
appear.  
4) On.the.handset,.press.and.hold.#.until.the.handset.beeps.and.displays.Handset.Registering.  
5) When.the.handset.has.registered.to.the.base,.the.LCD.will.display.Registration Complete.then.show.the.handset.  
ID.number..  
If.the.display.shows.Registration failed,.repeat.the.process.again.  
Note:. If.a.handset.has.ever.been.registered.to.a.base,.reset.the.handset.before.you.register.it.to.a.new.base.(see.  
Resetting.the.Handset.on.page.59)..Or.to.use.multiple.bases,.see.the.next.section.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Multiple Bases  
The.handsets.supplied.with.your.phone.can.be.registered.to.a.total.of.four.different.bases..Compatible.bases.include.  
the.DECT1500.series.and.the.WXIꢀ077.series..(See.our.website.or.contact.Customer.Service.for.an.up-to-date.list.  
of.compatible.models.)  
Note: To confirm how many bases the handset is registered to, open the Select Base.submenu.(follow.the.step.1.of.  
Selecting.the.base.on.page.15)..Press.END.to.close.the.list.and.return.to.standby.  
Registering the handset to another base  
To.register.a.handset.to.another.base:  
1) Make.sure.the.handset.battery.is.fully.charged.  
ꢀ) If.the.other.base.has.an.LCD.display:  
• With.the.phone.in.standby,.press.MENU/SELECT.on.the.base..Move.the.cursor.to.select.the.Register  
Handset.menu,.and.then.press.MENU/SELECT..Handset Registering.will.appear.  
If.the.other.base.does.not.have.an.LCD.display:.  
• Disconnect.the.base.AC.adapter..Then.press.and.hold.the.Find Handset.key*.while.you.reconnect.the.  
adapter..Keep.holding.the.Find Handset.key.until.the.charge.LED.starts.to.blink..  
*This.key.might.be.labeled.Find.or.Find HS.  
3) On.the.handset,.press.MENU/SELECT..Select.the.Register Base.menu..Handset Registering.will.appear.in.the.  
display..(After.step.ꢀ,.you.have.thirty.seconds.to.complete.this.step.3.before.the.system.returns.to.standby.)  
4) Wait.approximately.thirty.seconds..Registration complete.will.be.displayed.to.indicate.the.handset.has.been.  
registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned..The.handset.assigns.its.own.ID.to.this.  
base,.too..(Since.the.base.ID.is.based.on.the.order.in.which.the.handset.was.registered.to.the.different.bases,.a.  
base.may.have.different.IDs.on.each.handset.)  
If.Registration failed.appears.in.the.LCD,.please.try.these.steps.again.  
Note:. The.handset.will.stay.connected.to.the.new.base.until.you.select.a.different.base.(see.below).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting the base  
After.you.register.your.handset.to.more.than.one.base,.you.can.set.the.handset.to.automatically.search.for.a.new.  
base.if.the.base.it’s.currently.connected.is.unavailable.or.out.of.range..You.can.also.manually.select.which.base.you.  
want.the.handset.to.connect.to;.for.example,.if.you.have.one.base.with.an.answering.machine,.you.can.connect.to.  
that.base.to.check.messages.from.the.handset.  
1) With.the.phone.in.standby,.press.MENU/SELECT..Select.the.Handset Setup.menu,.and.then.the.Select Base.  
submenu.  
ꢀ) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.Auto.to.have.the.handset.automatically.  
search.for.and.select.base.  
3) Press.MENU/SELECT..Searching.will.appear.in.the.display.  
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,.“Searching”.continues.  
to appear. You can repeat the procedure listed above to return back to the original connection or to find the  
different.base.  
Note:. You.cannot.change.bases.during.a.call..  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting to Know Your New Phone  
Features  
• 1.9GHz.DECT.6.0.expandable.system  
• 7.ringer.options.on.handset.(3.tones/4.melodies)  
• Last.5.number.redial  
• Expands.up.to.6.handsets  
• Corded.handset.with.base.keypad  
• Cordless.handset.and.charging.cradle.  
• 70-number.phonebook.with.alphabetical.search  
• Trilingual.menu.displays.on.handset.  
(English,.Spanish,.or.French).  
&.Bilingual.menu.displays.on.base.  
(for.US.models:.English.and.Spanish,.  
for.Canadian.models:.English.and.French)  
• Personalized.ring.and.display.name.by.party..  
(on.handset)  
• Call.transfer  
• Conferencing  
• Intercom  
• Transfer.single.listing.or.entire.phonebook  
• Caller.ID/Call.Waiting.with.phonebook.match  
• Store.30.Caller.ID.numbers  
• Speakerphone.on.base.&.handset  
Answering system features  
• Digital.tapeless.recording  
• Day.and.time.announcement  
• Remote.message.retrieval  
Toll.saver  
• Up.to.14.minutes.of.recording.time  
• Call.screening  
• Personal.or.pre-recorded.outgoing.messages  
• Message.alert  
• Bilingual.voice.prompts..  
• Records.up.to.59.messages.  
(for.US.models:.English.and.Spanish,..  
for.Canadian.models:.English.and.French)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Terminology Used in this Manual  
Accessory  
Handsets  
Additional.handsets.that.can.register.to.the.base,.allowing.you.to.add.handsets.without.connecting.another.  
phone.line..This.base.supports.a.total.of.six.cordless.handsets;.see.page.13.for.compatible.handsets.  
Base  
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.  
Charging  
cradle  
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.pack.  
It.connects.to.power.but.does.not.connect.to.a.phone.line.  
Caller.ID.is.available.from.your.telephone.provider.and.is.offered.to.users.on.a.subscription.basis.  
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number.  
CID  
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.telephone.provider.  
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.  
CID/CW  
Any.settings.that.apply.to.all.registered.handsets.and.the.base.  
These.features.are.available.by.selecting.“Global Setup”.or.“Day & Time”.in.the.handset.menu..Only.one.  
handset.can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.currently.being.  
used..If.you.have.multiple.bases,.the.different.bases.have.each.global.settings;.select.the.base.before.  
changing.the.global.setting.(see.Selecting.the.base.on.page.15).  
Global  
Settings  
The.handset.and.the.base.are.not.in.use..(It.doesn’t.matter.whether.the.handset.is.in.the.cradle:.the.TALK/  
Standby  
FLASH.or.  
.on.the.handset.or.  
.on.the.base.hasn’t.been.pressed.or.the.base.corded.handset.hasn’t.  
been.picked.up.from.the.base,.and.there.is.no.dial.tone.)  
Station  
Talk  
Any.registered.handset.or.the.base.  
A.dial.tone.has.been.enabled,.so.you.can.dial.and.carry.on.a.conversation.with.an.outside.party.  
Manual Conventions  
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:  
Bold italic text.indicates.a.key.or.button.on.the.phone  
Italic text indicates text on the display, such as menu options, prompts, and confirmation messages  
lower case bold.text.indicates.a.status.light.on.the.phone  
ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charging.cradle  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Parts of the Handset  
new message LED  
Earpiece  
Display (LCD)  
key (up)  
CLEAR/INT'COM key  
(clear/intercom)  
MENU/SELECT key  
Speakerphone  
speaker and ringer  
key (phonebook/left)  
key (caller ID/right)  
END key  
TALK/FLASH key  
key (down)  
key (speaker)  
Twelve-key dial pad  
Battery compartment  
/TONE key  
# key  
REDIAL/PAUSE key  
/MUTE key  
(messages/mute)  
Microphone  
Charging contacts  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Parts of the Base  
ANSWER ON/OFF key  
CLEAR key  
Display (LCD)  
/
key  
(repeat/left/phonebook)  
key (up)  
Corded  
handset  
key and LED  
(play/stop)  
/
key (skip/right/caller ID)  
SELECT  
MENU  
CLEAR  
MENU/SELECT key  
Antenna  
Speaker  
ON/OFF  
DELETE key  
key (down)  
MUTE key  
ANSWER  
DELETE  
VOLUME+/  
-
HOLD  
FIND  
DEF  
ABC  
MUTE  
1
4
7
2
3
6
9
Coiled  
handset  
cord  
INTCOM  
JKL  
GHI  
MNO  
5
REDIAL  
PAUSE  
FLASH  
FLASH key  
WX  
YZ  
PQ  
RS  
TUV  
8
key and LED (speaker)  
OPER  
TONE  
0
MIC  
Microphone  
# key  
/TONE key  
FIND/HOLD/INT'COM key (find/hold/intercom)  
REDIAL/PAUSE key  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Interface  
Reading the Display  
Handset  
In standby  
Time  
During a call  
6CNMꢀꢀꢀꢀꢀ2ꢀꢀ  
ꢀꢁ1((ꢀꢂꢃꢁꢄꢄ#  
ꢀꢀꢀ*CPFUGVꢀꢅꢂ  
ꢀꢀꢀ0GYꢀ%+&ꢁꢀꢆ  
Handset ID and banner  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢄꢁꢄꢄ  
ꢀꢀꢀ  
Call duration  
Number of new  
Caller ID calls received  
.
Note:.The.handset.does.not.display.the.day.and.time.  
Base  
In standby  
Status of your  
Status of your  
During a call  
answering system  
answering system  
Answer ON OFF  
Answer ON OFF  
Day of the week  
and time  
Number of new  
Caller ID calls received  
Message counter  
Call duration  
Message counter  
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.  
The.voice mail.icon.appears.when.you.have.messages.waiting.in.your.voice.mailbox.  
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.  
The.speaker.icon.appears.when.the.speaker.phone.is.in.use.  
The.T-coil.icon.appears.when.the.T-coil.Mode.is.turned.on.  
The.mute.icon.appears.while.the.microphone.is.muted.  
The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.  
ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Four-way Function Key  
Increase the volume  
Your.handset.and.base.have.a.four-way.function.key.  
that.allows.you.to.move.the.cursor.on.the.display.and.  
access.the.most.commonly.used.features.at.the.touch.of.  
a.button.  
• Press.the.left.side.of.the.key.to.open.the.phonebook.  
• Press.the.right.side.of.the.key.to.open.the.Caller.ID.  
list..  
• Press.the.top.of.the.key.to.increase.the.ringer.volume.  
(while.the.phone.is.in.standby).or.speaker.volume.  
(while.you.are.on.a.call).  
Open the  
phonebook  
Open the  
Caller ID list  
Four-way  
Function Key  
• Press.the.bottom.of.the.key.to.decrease.the.ringer.  
volume.(while.the.phone.is.in.standby).or.speaker.  
volume.(while.you.are.on.a.call).  
Decrease the volume  
Using the Menus  
The.menus.for.the.handset.and.the.base.work.in.the.same.way:  
To.open.the.menu,.press.the.MENU/SELECT.key.  
• The.arrow.cursor.on.the.left.side.of.the.line.shows.which.menu.item.is.currently.highlighted..Use.  
way.function.key.to.move.the.cursor.up.and. .to.move.the.cursor.down.  
To.select.the.highlighted.option,.press.MENU/SELECT.  
on.the.four-  
To.go.back.to.the.previous.screen,.press.left.on.the.four-way.function.key.  
To.exit.the.menu.on.the.handset,.press.END..  
To.exit.the.menu.on.the.base,.press.  
.
• If.you.don’t.press.any.keys.for.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu..(When.setting.the.day.  
and.time,.the.time-out.period.is.extended.to.two.minutes.)  
• For.Ans..Setup,.Global Setup.and.Register Handset.(base.only).menu.options,.make.sure.the.line.is.not.in.use.  
and.the.handsets.are.within.range.of.the.base..If.you.have.multiple.bases,.be.sure.to.select.the.correct.base.  
before.changing.the.menu.options.  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Entering Text from Your Phone  
You.can.use.the.number.keypad.on.your.handset.or.base.to.enter.text.by.referring.to.the.letters.printed.on.each.  
number key. When you press the number key in a text entry field, the phone displays the first letter printed on the  
number.key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third.  
• When.[Aa] appears on the display, capital letters are displayed first, then lower case letters, and then the number  
on.the.key.  
• When.[aA] appears on the display, lower case letters are displayed first, then the number on the key, and then  
capital.letters.  
When you input the first letter or a letter after a blank space, the default mode is [Aa]..From.the.next.letter,.the.  
mode.changes.to.[aA].automatically.  
You.can.switch.back.and.forth.the.mode.manually.between.[Aa] and.[aA]..Press. /ToNE;.the.case.(small/capital).  
of.the.letter.entered.changes.also.  
If two letters in a row use the same number key, enter the first letter, then use right on.the.four-way.function.key.to.  
move.the.cursor.to.the.next.position.to.enter.the.second.letter..  
Number of times key is pressed (when [Aa] appears on the display)  
For.example,.to.enter.the.word.“Movies”:.  
1) Press.6.once.to.enter.M.  
1
ꢀ) Use.right.on.the.four-way.function.key.to.move.the.  
2 ABC  
cursor.to.the.right.  
3 DEF  
4 GHI  
3) Press.6.three.times.to.enter.o.  
4) Press.8.three.times.to.enter.v.  
5) Press.4.three.times.to.enter.i.  
6) Press 3.two.times.to.enter.e.  
7) Press.7.four.times.to.enter.s.  
8) Press.MENU/SELECT.to.end.your.text.entry.  
5 JKL  
6 MNO  
7 PQRS  
8 TUV  
9 WXYZ  
0 OPER  
If.you.make.a.mistake.while.entering.a.name,.use.right or.  
left on.the.four-way.function.key.to.move.the.cursor.to.the.  
incorrect.character..Press.CLEAr/INT’CoM.on.the.handset.or.CLEAr.on.the.base.to.erase.the.wrong.character,.  
and.then.enter.the.correct.character..To.delete.all.characters,.press.and.hold.CLEAr/INT’CoM.on.the.handset.or.  
CLEAr.on.the.base.  
ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Setup  
Selecting a Language  
Your.handset.supports.three.languages:.English,.French.and.Spanish..And.  
your.base.supports.two.languages:.English.and.Spanish.for.US.models.or.  
English.and.French.for.Canadian.models..You.can.set.the.station’s.language.  
individually..Once.you.select.a.language,.the.menus.on.the.station.will.  
display.in.that.language..The.default.language.is.English.  
*CPFUGVꢀ.CPIWCIG  
ꢀ'PINKUJ  
ꢀ(TCP㩟CKU  
1) Press.MENU/SELECT..  
ꢀ) On.the.handset,.select.the.Handset.Setup.menu,.and.then.the.Handset  
Language.submenu..  
On.the.base,.select.the.Base.Setup.menu,.and.then.the.Base Language.  
submenu.  
3) On.the.handset,.move.the.cursor.to.choose.English,.Français.(French).  
or.Español.(Spanish)..  
On.the.base,.move.the.cursor.to.choose.from.two.languages..  
for US models:.Choose.English.or.Español.(Spanish)..  
for Canadian models:.Choose.English.or.Français.(French).  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Setting the Day & Time  
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.on.the.  
answering.system.may.not.have.the.correct.time.and.day.stamp.  
ꢀꢀꢀ&C[ꢀꢁꢀ6KOG  
ꢀꢀ570ꢀꢂꢃꢄꢅꢅꢀ#/  
ꢀꢀ=㨲ꢆ㨱ꢆUGNGEV?  
To.change.the.time.shown.in.the.display,.follow.the.steps.listed.below..  
1) Press.MENU/SELECT.  
ꢀ) Move.the.cursor.to.Day & Time.and.press.MENU/SELECT.  
ꢀ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3) Use. .and. .to.select.the.day.of.the.week,.and.press.MENU/SELECT.  
Note:.The.day.of.the.week.does.not.appear.on.the.handset.display.  
4) Use.the.number.keypad.(0.through.9).to.enter.the.hour.and.minutes.  
5) Use. .and. .to.select.AM.or.PM,.and.press.MENU/SELECT. You hear a confirmation tone.  
Activating Personal Ring (Handset only)  
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.  
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.  
you.know.who.is.calling..To.turn.the.personal.ringing.on.or.off,.follow.these.steps:  
1) Press.MENU/SELECT..  
ꢀ2GTUQPCNꢀ4KPI  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Personal Ring.  
ꢀ1P  
submenu.  
ꢀ1HH  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Activating the Key Touch Tone  
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.  
1) Press.MENU/SELECT..  
Key Touch Tone  
ꢀ) Select.the.Handset Setup.or.Base.Setup.menu,.and.then.the.Key  
On  
Touch Tone.submenu.  
Off  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
ꢀ4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Up the Phonebook  
Each.station.has.its.own.separate.phonebook.that.holds.up.to.seventy.names.and.numbers..When.a.station’s.  
phonebook.is.full,.the.station.beeps.and.shows.Memory Full.on.the.display..You.cannot.add.any.names.and.numbers.  
in.that.station’s.phonebook.until.you.delete.some.of.the.existing.ones.  
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.  
once.your.call.connects..This.is.referred.to.as.chain.dialing..(See.Chain.dialing.from.the.phonebook.on.page.3ꢀ.)  
Creating Phonebook Entries  
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:  
1) With.the.phone.in.standby,.press. .(on.the.left.side.of.the.four-way.key).  
ꢀꢀꢀ'FKVꢀ0COG  
ꢀ) To.create.a.new.phonebook.entry,.press.MENU/SELECT..Select.the.Create  
New.menu..Edit Name.appears.  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ=#C?  
3) Enter the name for this entry (Edit Name)..  
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.  
Text.from.Your.Handset.on.page.ꢀꢀ.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.  
entry,.your.phone.will.store.this.entry.as.No Name..Press.MENU/SELECT when you are finished.  
4) Enter the number for this entry (Edit Number).  
Once.you.have.stored.a.name,.Edit Number.appears.next..Use.the.number.  
keypad.to.enter.the.phone.number;.the.phone.number.can.contain.up.to.  
twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.dialing.  
(for.example,.to.enter.an.extension.or.an.access.code),.press.rEDIAL/  
ꢀꢀ'FKVꢀ0WODGT  
ꢁꢂꢂꢃꢄꢂꢄꢅꢆꢇ㨫  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
PAUSE.to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.  
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..  
Each.pause.counts.as.one.digit..Press.MENU/SELECT.when.you.are.  
finished.  
ꢀ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5) Assign a personal ring tone for this entry (Personal ring) (Handset only).  
You.can.attach.a.special.ring.tone.to.each.phonebook.entry;.the.phone.will.  
use.this.ring.tone.when.this.person.calls..Use. .and. .to.select.one.of.  
the.seven.different.ring.tone.options.(see.Selecting.a.Ring.Tone on.page.ꢀ9.  
for.a.complete.list.of.ring.tones)..As.you.scroll.through.the.tones,.you.will.  
hear.a.sample.of.each.tone.(unless.the.handset.ringer.volume.is.set.to.off)..  
When.you.hear.the.ring.tone.you.want.to.use,.press.MENU/SELECT..If.you.  
do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.choose.No  
Selection;.the.phone.will.use.your.standard.ring.tone.setting.  
ꢀ2GTUQPCNꢀ4KPI  
ꢀ0Qꢀ5GNGEVKQP  
ꢀ(NKEMGT  
6) You will hear a tone confirming that the new entry has been stored, and Done!.appears.in.the.display.  
Finding a Phonebook Entry  
Press. .to.open.the.phonebook..Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.  
phonebook.from.A.to.Z,.press. ..To.scroll.through.the.phonebook.from.Z.to.A.press.  
.
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.  
for.an.entry.beginning.with.the.letter.M,.press.6 once. The phonebook jumps to the first entry that begins with the  
letter.you.entered;.you.can.then.use. .and. .to.scroll.to.other.entries.  
To.close.the.phonebook.and.return.to.standby,.press.END..If.you.are.looking.up.a.phonebook.entry.during.a.call.and.  
want.to.close.the.phonebook,.press. .again.instead.of.END.  
Editing an Existing Phonebook Entry  
1) With.the.phone.in.standby,.press. .to.open.the.phonebook.  
ꢀ) Find.the.entry.you.want.to.edit.and.press.MENU/SELECT.  
3) Select.Edit..Follow.the.steps.for.Creating.Phonebook.Entries.on.page.ꢀ5..If.you.do.not.wish.to.change.the.  
information.at.any.step,.simply.press.MENU/SELECT.to.go.to.the.next.step.  
ꢀ6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Storing Caller ID or Redial Numbers in the Phonebook  
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.  
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.  
will.not.be.able.to.store.it.)  
1) With.the.phone.in.standby,.press. .to.open.the.Caller.ID.list.or.rEDIAL/PAUSE.to.open.the.redial.list.  
ꢀ) Use. .and. .to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.you.  
want.to.store,.press.MENU/SELECT..  
Note:..If.you.need.to.add.(or.delete).a.“1”.to.the.beginning.of.the.Caller.ID.phone.number,.press. /ToNE.(see..  
.
.
page.33)..If.you.need.to.add.(or.delete).the.stored.area.code.to.the.Caller.ID.phone.number,.press.#.(see..  
page.34).  
3) Select.Store into PB..Edit Name.appears..If.the.phone.number.is.already.stored.in.memory,.you.will.hear.a.  
beep,.and.This data is already saved!.appears.in.the.display..The.number.will.not.be.stored.  
4) Continue.by.following.the.steps.for.Creating.Phonebook.Entries.on.page.ꢀ5.  
Deleting a Single Phonebook Entry  
1) With.the.phone.in.standby,.press.  
.
Edit  
ꢀ) Find.the.entry.that.you.want.to.delete.and.press.MENU/SELECT..  
3) Select.Delete..Delete Entry?.appears.in.the.display.  
4) Move.the.cursor.to.select.Yes.  
Copy  
Delete  
5) Press.MENU/SELECT. You will hear a confirmation tone, and Deleted!.appears.in.the.display..  
ꢀ7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Deleting all Phonebook Entries  
1) With.the.phone.in.standby,.press.  
.
ꢀ) Press.MENU/SELECT,.and.then.select.Delete All..Delete All?..  
ꢀ%TGCVGꢀ0GYꢀ  
ꢀ%QR[ꢀ#NN  
appears.in.the.display.  
3) Move.the.cursor.to.select.Yes.  
ꢀ&GNGVGꢀ#NN  
4) Press.MENU/SELECT. You will hear a confirmation tone, and Deleted!..  
appears.in.the.display.  
Copying Phonebook Entries to Another Station  
You.can.transfer.phonebook.entries.from.one.station.to.another.without.having.to.re-enter.names.and.numbers..You.  
can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.  
1) With.the.phone.in.standby,.press. ..  
ꢀ) To copy one entry, find the phonebook entry you want to copy. Press MENU/SELECT,.and.then.select.Copy..  
To.copy.all.entries,.press.MENU/SELECT,.and.then.select.Copy All.  
3) Move.the.cursor.to.select.the.station.which.you.want.to.transfer.the.entries.to.and.then.press.MENU/SELECT.  
If.you.select.Copy All,.Are you sure?.appears.on.the.display.screen..Move.the.cursor.to.select.Yes,.and.then.  
press.MENU/SELECT.  
.
4) The.phonebook.entries.will.be.transferred.to.the.designated.station..During.the.copy.process,.the.receiving.  
station.shows.Receiving.and.the.ID.of.the.sending.station.  
5) When.the.transfer.is.completed,.Done!.appears.on.the.station.  
Notes:.•.The.handsets.must.be.currently.connected.to.the.same.base.(see.page.15).  
.
•.If.the.station.you.want.to.transfer.to.already.has.seventy.entries.in.its.phonebook,.you.will.hear.a.beep,.and.  
Not enough memory in receiving unit.appears.on.the.display..  
.
•.If.the.selected.station.is.out.of.range.or.data.transfer.is.cancelled,.Unavailable.appears.in.the.display..  
Phonebook.listings.will.not.be.transferred.  
ꢀ8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customizing Your Handsets  
All.of.the.following.options.are.set.separately.for.each.handset,.so.you.can.customize.a.handset.for.each.room.in.  
your.house.  
Changing the Handset Banner  
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.  
default.banner.is.Handset.#1,.Handset.#ꢀ,.etc..You.can.change.the.name.your.  
phone.displays.by.changing.the.banner.display..If.you.have.more.than.one.handset,.  
the banner name identifies your handset.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Banner.submenu.  
3) Use.the.keypad.to.enter.or.edit.the.banner.name..(See.Entering.Text.from.Your.Handset.on.page.ꢀꢀ.for.detailed.  
instructions.on.entering.text.)  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Note:.. When.you.have.multiple.bases.and.even.if.the.handset.ID.is.changed.when.you.switch.to.a.different.base,.  
the.handset.will.keep.the.banner.name.  
Selecting a Ring Tone  
You.may.choose.from.four.melodies.or.three.tones.for.your.  
phone’s.primary.ring.tone..Each.handset.can.use.a.different.  
ring.tone.or.melody..The.available.ring.tones.are.as.listed:  
Fur.Elise.(Elise)  
Flicker  
Clatter  
Wake.Up  
We.Wish.You.A.Merry  
Christmas.(Merry-Xmas)  
Aura.Lee.(Aura Lee)  
Star.Spangled.Banner  
(Star Spngl)  
Tones  
Melodies  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Ringer Tones.submenu.  
3) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.  
hear.a.sample.(unless.the.handset.ringer.volume.is.set.to.off).  
4) When.you.hear.the.tone.you.want.to.use,.press.MENU/SELECT..You.will.hear.a.  
confirmation tone.  
ꢀ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Activating AutoTalk  
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.  
a.button.to.answer.the.call.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.AutoTalk.submenu.  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Activating Any Key Answer  
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.twelve-key.dial.pad..  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Any Key Answer.submenu.  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Using Your Phone  
During a Power Failure  
Because.the.phone.is.a.corded/cordless.combination.phone,.it.can.still.perform.several.of.its.functions.during.a.  
power.failure..The.following.features.will.function.with.base.corded.handset.even.during.a.power.failure:  
• Making.and.receiving.calls.with.the.base.corded.handset  
• Corded.handset.volume.control  
• Call.Waiting.on.a.base.corded.handset.call  
• Entering.pauses.when.dialing.from.the.base.corded.handset  
• A.special.ring.tone.will.sound.during.a.power.failure.and.you.will.not.be.able.to.control.the.volume.setting.of.this.  
ring.  
All.other.features.are.disabled.during.a.power.failure.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making and Receiving Calls  
From the base  
speakerphone  
From the base  
corded handset  
From a handset  
speakerphone  
From a cordless handset  
1) Pick.up.the.handset.  
1) Pick.up.the.corded.  
handset.from.the.  
base.  
1) Pick.up.the.handset.  
from.the.cradle.  
1) Press.  
.
from.the.cradle.  
ꢀ) Press.  
.
ꢀ) Listen.for.  
ꢀ) Press.TALK/FLASH.  
3) Listen.for.the.dial.tone.  
4) Dial.the.number.  
the.dial.tone.  
ꢀ) Listen.for.the.dial.  
3) Listen.for.the.dial.  
tone.  
tone.  
3) Dial.the.  
Making  
a call  
number.  
3) Dial.the.number.  
4) Dial.the.number.  
OR  
OR  
OR  
OR  
1) Pick.up.the.handset.  
1) Dial.the.  
1) Dial.the.number.  
1) Pick.up.the.handset.  
from.the.cradle.  
number.  
from.the.cradle.  
ꢀ) Pick.up.the.corded.  
handset.from.the.  
base.  
ꢀ) Dial.the.number.  
ꢀ) Press.  
.
ꢀ) Dial.the.number..  
3) Press.TALK/FLASH.  
3) Press.  
.
1) Pick.up.the.handset..  
(If.AutoTalk.is.on,.the.  
phone.will.answer.when.  
you.pick.up.the.handset.  
from.the.cradle.)  
1) Pick.up.the.handset..  
ꢀ) Press.  
Answering  
a call  
Pick.up.the.corded.  
handset.from.the.base.  
Press.  
Press.  
.
.
.
ꢀ) Press.TALK/FLASH..(If.  
Any.Key.Answer.is.on,.  
you.can.also.press.any.  
key.on.the.dial.pad.)  
Return.the.corded.  
handset.to.the.base.  
cradle.  
Hanging  
up  
Press.END.or.return.the.handset.to.the.cradle.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making a Call from the Phonebook  
1) With.the.phone.in.standby,.press. .to.open.the.phonebook.  
ꢀ) Find.the.phonebook.entry.you.want.to.call.(see.Finding.a.Phonebook.Entry.on.page.ꢀ6).  
3) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.  
base.to.dial.the.number.  
Note:. You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.  
.on.the.base.before.you.open.the.phonebook..Find.the.phone.number.you.want.to.dial,.and.then.press.  
MENU/SELECT.  
Chain dialing from the phonebook  
If.you.often.have.to.enter.a.series.of.digits.or.a.code.number.during.a.call,.you.can.save.that.code.number.to.a.  
phonebook.entry..When.your.call.connects,.just.use.the.phonebook.to.transmit.the.saved.code.number..(This.is.  
referred.to.as.chain.dialing.).  
1) Enter.the.code.number.(up.to.twenty.digits).into.the.phonebook.(see.Creating.Phonebook.Entries.on.page.ꢀ5)..  
Be.sure.to.enter.the.code.number.into.the.phonebook.exactly.as.you.would.enter.it.during.a.call..  
ꢀ) During.a.call,.when.you.hear.the.prompt.that.tells.you.to.enter.the.code.number,.press.  
.
3) Use. .or. .to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.  
4) Press.MENU/SELECT..The.phone.sends.the.digits.of.the.code.number.exactly.as.you.saved.them.in.the.  
phonebook.entry.  
Switching to the Speakerphone During a Call  
Handset:.To.switch.a.normal.call.to.the.handset.speakerphone,.press. ..To.switch.from.a.handset.speakerphone.  
call.to.a.normal.call,.press.  
.
Base:.To.switch.a.call.from.the.corded.handset.to.the.base.speakerphone,.press. .and.then.return.the.corded.  
handset.to.the.cradle..To.switch.a.call.from.the.base.speakerphone.to.the.corded.handset,.simply.pick.up.the.corded.  
handset.from.the.cradle.  
3ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Caller ID, Call Waiting, and Redial Lists  
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.  
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.  
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.  
Using the Caller ID List  
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.station..Caller.ID.records.  
are.stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.  
record.will.be.automatically.deleted.when.a.new.call.is.received..When.you.  
have.new.Caller.ID.records.(that.is,.records.you.have.not.reviewed.yet).and.  
the.phone.is.in.standby,.the.station.will.display.the.number.of.new.Caller.ID.  
calls.received..(See.page.ꢀ0.)  
To.open.the.Caller.ID.list,.press.  
.(on.the.right.side.of.the.four-way.key)..The.phone.will.show.the.latest.record..  
Use. .and. to.scroll.through.the.list..(New.records.have.an.asterisk.next.to.the.received.time.)  
Making a Call from a Caller ID Record  
1) With.the.phone.in.standby,.press.  
.to.open.the.Caller.ID.list.  
ꢀ) Use. .and.  
to find the Caller ID record you want to dial.  
3) If.you.need.to.add.(or.delete).a.“1”.to.the.beginning.of.the.displayed.phone.number,.press. /ToNE..  
4) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.  
base.to.dial.the.number.  
Note:. You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.  
.on.the.base.before.you.open.the.caller.ID.list..Find.the.phone.number.you.want.to.dial,.and.then.press.  
MENU/SELECT.  
What’s.this.“add.or.delete.a.1”.about?  
• Any.phone.number.in.the.Caller.ID.records.might.(or.might.not!).have.a.“1”.at.the.front,.depending.on.how.  
different.phone.companies.send.the.Caller.ID.information..  
• The.phone.dials.the.number.exactly.as.it.appears.in.the.Caller.ID.record..  
• If.the.phone.number.is.a.long.distance.or.toll.call,.but.the.Caller.ID.record.does.not.have.a.“1”.in.front.of.the.  
number,.press. /ToNE.to.add.it..If.the.phone.number.is.a.local.or.non-toll.call,.but.the.Caller.ID.record.has.a.  
“1”.in.front.of.the.number,.press. /ToNE.to.delete.it.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Seven-digit dialing  
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.  
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..This.setting.applies.to.the.  
base.and.all.handsets.currently.connected.to.the.same.base.  
To.program.your.local.area.code:  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Global Setup.menu,.and.then.the.Area Code.submenu.  
3) Use.the.number.keypad.(0.through.9).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.stored,.  
it.appears.in.the.display..Press.CLEAr/INT’CoM.on.the.handset.or.CLEAr.on.the.base.to.delete.the.stored.  
code,.and.then.enter.a.new.one.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Note:. If.you.have.multiple.bases,.select.the.base.before.programming.the.area.code.(see.page.15).  
The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area  
code.to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.station.hides.the.area.code.in.the.Caller.  
ID.list.  
• When.you.are.reviewing.the.Caller.ID.list,.you.can.show.the.hidden.area.code.by.pressing.#..Press.#.again.to.  
hide.the.area.code..  
• When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.dials.or.stores.the.  
digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.#.to.show.the.area.  
code.before.you.dial.or.store.the.number..(See.page.ꢀ7.to.store.a.Caller.ID.record.in.the.phonebook.)  
Deleting Caller ID Numbers  
To.delete.only.one.Caller.ID.number,.press.  
delete..Press.MENU/SELECT.and.select.Delete Entry. When the phone asks you to confirm, select Yes.  
To.delete.all.the.Caller.ID.numbers,.press. .when.the.phone.is.in.standby..Press.MENU/SELECT.and.select.  
when the phone is in standby, and then find the number you want to  
Delete All. When the phone asks you to confirm, select Yes.  
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.  
.
•.Caller.ID.numbers.are.stored.separately.in.each.station..Deleting.a.record.from.one.station.will.not.delete.  
the.record.from.any.other.stations.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Call Waiting  
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.  
phone,.a.call.waiting.tone.will.sound..If.you.also.have.Caller.ID.service,.the.phone.  
shows.the.Caller.ID.information.for.the.incoming.call..Press.TALK/FLASH.on.the.  
handset.or.FLASH.on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.  
then.you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.TALK/FLASH.  
on.the.handset.or.FLASH.on.the.base.  
Note:.. You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.  
Redialing a Number  
You can quickly redial the last five numbers dialed on each station.  
1) With.the.phone.in.standby,.press.the.rEDIAL/PAUSE.to.open.the.redial.list.  
ꢀ) Use. .and. .or.rEDIAL/PAUSE.to.scroll.through.the.redial.list.  
3) When you find the number you want to dial, press TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.  
handset.from.the.base.or.press. .on.the.base.  
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.  
.
.
•.If.the.redial.memory.is.empty,.Empty.appears.in.the.display.and.you.will.hear.a.beep.  
•.You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.  
press. .on.the.base.before.you.open.the.redial.list..Find.the.phone.number.you.want.to.dial,.and.then.  
press.MENU/SELECT.  
Deleting a Redial Record  
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:  
1) With.the.phone.in.standby,.press.rEDIAL/PAUSE.  
ꢀ) Use. .and. .to.scroll.through.the.redial.list.  
3) When you find the redial number you want to delete, press MENU/SELECT.and.select.Delete Entry.  
4) When the phone asks you to confirm, select Yes..The.redial.number.is.deleted.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the Ringer, Earpiece and Speaker Volume  
Adjusting the Ringer Volume  
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).  
separately.on.each.handset.or.the.base.  
1) With.the.phone.in.standby,.press. .or. ..The.display.shows.the.current.  
volume.level.and.the.station.sounds.the.ringer.at.that.level..  
ꢀ) Use. .to.make.the.ringer.volume.louder.or. .to.make.it.softer.or.turn.it.  
completely.off.  
3) When.you.hear.the.ringer.volume.level.you.want.to.use,.stop.pressing.keys..  
The.station.will.use.the.new.ringer.volume.starting.with.the.next.incoming.call.  
Note:. If.you.set.the.ringer.volume.to.Off,.the.station.won’t.ring..Other.stations.will.ring.according.to.their.individual.  
settings.  
Muting the Ringer (One call only)  
While.the.phone.is.ringing,.press. /MUTE.or.END.on.the.handset,.or.MUTE.or. .on.the.base.to.mute.the.ringer.  
for.this.call..The.phone.will.ring.again.on.the.next.call..(The.cordless.handset.must.be.off.the.cradle.to.mute.the.  
ringer.)  
Adjusting the Earpiece Volume  
You.can.choose.from.six.volume.levels.for.each.cordless.handset.earpiece.or.the.corded.handset.earpiece..To.  
adjust.the.earpiece.volume.while.on.a.call,.press. .(to.make.it.louder).or. .(to.make.it.softer)..The.display.shows.  
the.current.volume.level.for.the.earpiece.  
Adjusting the Speaker Volume  
Handset Speaker:.You.can.choose.from.six.volume.levels.for.the.handset.speaker.while.on.a.speakerphone.call.or.  
when.the.handset.is.accessing.the.answering.system..To.adjust.the.handset.speaker.volume,.press. .(to.make.it.  
louder).or. .(to.make.it.softer)..The.handset.display.shows.the.current.volume.level.for.the.handset.speaker.  
Note:. The.handset.earpiece.and.the.handset.speaker.have.separate.volume.settings.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Base Speaker:.You.can.choose.from.ten.volume.levels.for.the.base.speaker.while.on.a.speakerphone.call.or.when.  
the.answering.system.announces.or.plays.a.message..To.adjust.the.base.speaker.volume,.press. .(to.make.it.  
louder).or. .(to.make.it.softer)..The.base.display.shows.the.current.volume.level.for.the.base.speaker.  
Adjusting the Audio Tone  
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on  
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.  
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.cordless.handset.earpiece,.not.the.  
speakerphone.and.the.base.corded.handset.  
To.adjust.the.audio.tone:  
1) While.on.a.call,.press.MENU/SELECT.  
ꢀ) Move.the.cursor.to.select.Audio Tone,.and.then.press.MENU/SELECT.  
3) Move.the.cursor.to.select.desired.option.(High Tone,.Natural Tone,.or.Low Tone),.and.then.press.MENU/  
SELECT..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.  
Activating T-Coil Mode  
Digital.cordless.phones.generate.magnetic.signals.that.can.cause.noise.on.hearing.aids.equipped.with.a.telecoil.  
(“T”.coil).feature..This.phone.includes.a.special.“T-coil”.mode.that,.when.activated,.reduces.the.magnetic.noise.  
generated.by.the.cordless.handset.  
1) With.the.phone.in.standby,.press.MENU/SELECT.  
ꢀ) Select.the.Handset Setup.menu,.and.then.the.T-coil.submenu.  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
When.the.T-coil.mode.is.turned.on,. .appears.in.the.display.during.a.call.  
Note:.. Using.the.T-coil.mode.may.shorten.the.handset.battery’s.talk.time;.make.sure.you.always.return.the.handset.  
to.the.charging.cradle.when.not.in.use..Only.activate.T-coil.mode.if.you.experience.problems.using.the.  
handset.with.a.T-coil-equipped.hearing.aid.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Finding a Lost Handset  
To.locate.a.misplaced.handset,.press.FIND/HoLD/INT’CoM.on.the.base.when.the.phone.is.in.standby..Use.  
or. .to.select.the.handset.you.want.to.page,.and.then.press.MENU/SELECT..Select.All.to.page.all.registered.  
handsets..To.cancel.paging,.press.FIND/HoLD/INT’CoM.on.the.base.again.  
.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.  
Using Hold, Conference and Transfer  
Placing a Call on Hold  
1) During.a.call,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.to.place.the.caller.  
on.hold..If.you.leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.Line On Hold.  
ꢀ) To.return.to.the.party.on.hold,.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.  
base.or.press. .on.the.base..The.phone.will.return.to.the.holding.party.  
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be  
disconnected.and.the.phone.will.return.to.standby.  
.
•.While.a.call.is.on.hold,.Call.Waiting.and.CID.on.Call.Waiting.do.not.work..  
Conferencing  
Outside call  
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.in.a.  
conference.call..A.four-way.conference.call.consists.of.an.outside.line,.two.  
handsets,.and.the.base..You.can.easily.join.a.call.already.in.progress..The.  
handsets.must.be.currently.connected.to.the.same.base.(see.page.15).  
Handset #2  
1) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.  
handset.from.the.base.or.press. .on.the.base.to.join.the.call.  
ꢀ) To.hang.up,.return.the.handset.to.the.cradle.or.press.END.on.the.  
handset.or.return.the.corded.handset.to.the.base.or.press. .on.the.  
base..The.other.party.will.still.be.connected.to.the.call.  
Base  
speakerphone  
Handset #1  
or corded handset  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring a Call  
You.can.transfer.a.call.from.one.station.to.another..The.handsets.must.be.currently.connected.to.the.same.base.(see.  
page.15).  
1) During.a.call,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.  
ꢀ) Use. .or. .to.select.the.station.you.want.to.transfer.the.call.to,.and.then.press.MENU/SELECT..Select.All.to.  
page.all.other.stations..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.  
transfer,.press.TALK/FLASH.or. .on.the.handset.or. .on.the.base.  
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press.  
TALK/FLASH.or. .again.on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.  
base.again.  
Answering a transferred call  
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone;.stations.also.show.the.ID.of.the.station.that.is.  
paging..To.accept.the.call.transfer:  
1) To.answer.the.page.and.speak.to.the.transferring.station,.press.TALK/FLASH.or.CLEAr/INT’CoM.on.the.  
handset,.or. .or.FIND/HoLD/INT’CoM.on.the.base,.or.pick.up.the.corded.handset.from.the.base.  
Note:. If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.  
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.  
ꢀ) To.accept.the.call.and.speak.to.the.caller,.press.TALK/FLASH on.the.receiving.handset,.or. .on.the.receiving.  
base.  
3) When.you.accept.the.transferred.call,.the.transferring.station.will.be.disconnected.  
Only the first station.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.  
within.one.minute,.the.operation.will.be.canceled.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Special Features  
Privacy Mode  
Privacy.mode.prevents.other.stations.(that.are.connected.to.the.same.base).from.interrupting.your.call..As.long.as.  
your.station.is.in.privacy.mode,.other.stations.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.  
show.Unavailable.  
1) While.on.a.call,.press.MENU/SELECT.  
ꢀ) Select.Call Privacy..Privacy Mode On.appears.in.the.display.for.two.seconds;. .appears.and.remains.in.the.  
display.until.the.feature.is.turned.off.  
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..Privacy Mode Off.appears.  
Note:.Privacy.mode.does.not.affect.handsets.that.are.connected.to.a.different.base.or.extension.phone.  
Using the Intercom  
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..The.handsets.must.be.currently.  
connected.to.the.same.base.(see.page.15).  
Making an intercom page  
1) With.the.phone.in.standby,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.  
ꢀ) Use. .or. .to.select.the.station.you.want.to.talk.with,.and.then.press.MENU/SELECT..Select.All.to.page.all.  
other.stations.  
3) To.cancel.the.intercom.page,.press.END.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.  
Notes:.Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:  
You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.station.  
You.do.not.select.a.station.within.thirty.seconds.  
Your.handset.is.out.of.range.(Out Of Range.appears.in.the.display).  
• The.party.does.not.answer.the.page.within.one.minute.  
• The.party.is.busy.  
• The.party.is.out.of.range.(Unavailable.appears.in.the.display).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Answering an intercom page  
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.paging.  
1) Press.TALK/FLASH.or.CLEAr/INT’CoM.on.the.handset,.or. .or.FIND/HoLD/INT’CoM.on.the.base,.or.pick.  
up.the.corded.handset.from.the.base.  
Note:..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.  
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.  
ꢀ) To.hang.up.an.intercom.call,.press.END.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base,.or.return.the.  
corded.handset.to.the.base.  
Muting the Microphone  
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..  
1) Press. /MUTE.on.the.handset.or.MUTE.on.the.base..Mute On.and. .appear.in.the.display;. .remains.while.  
muting.is.on.  
ꢀ) To.cancel.muting,.press. /MUTE.on.the.handset.or.MUTE.on.the.base.again..Mute Off.appears..(While.on.a.  
base.speakerphone.call,.pressing. .on.the.base.is.also.available.to.cancel.muting.)  
Tone Dialing Switch Over  
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.  
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.  
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press /ToNE.  
on.the.station..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.  
phone.automatically.returns.to.pulse.dialing.  
See.Changing.the.dial.mode.on.page.1ꢀ.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using a Voice Mail Service  
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..When.there.are.  
messages.waiting.in.your.voice.mailbox,.the.new message LED on the handset flashes, and .appears.in.both.the.  
handset.and.base.displays.  
Note: This notification feature supports the voice mail service that uses Frequency Shift Keying (FSK) for the  
message notification signal only.  
If.you.store.your.access.number.and.password.(provided.by.the.voice.mail.service.you.subscribe.to).in.your.  
phonebook,.you.can.quickly.dial.in.and.retrieve.your.messages..(See.page.ꢀ5.)  
Resetting the voice message waiting indicator  
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and ..  
appears.in.the.handset.display..In.the.event.your.message.waiting.light.gets.out.of.sync.with.your.phone.company’s.  
voice.messaging.system,.you.can.manually.reset.it.back.to.the.“No.messages.waiting”.state.  
1) On.the.base,.press.MENU/SELECT..  
ꢀ) Select.the.Global Setup.menu,.and.then.the.VMWI Reset.submenu.  
3) Move.the.cursor.to.select.Yes.or.No.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
4ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Up the Answering System  
You.can.set.up.your.answering.system’s.features.from.the.base.or.handset.with.two.exceptions:.you.can.only.  
change.the.greeting.or.record.a.new.greeting.from.the.base..Only.one.station.at.a.time.can.access.the.answering.  
system.menus.  
Recording a Personal Greeting  
Your.answering.system.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.  
call:.“Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.”.You.can.record.your.own.  
personal.outgoing.greeting..Your.recorded.greeting.must.be.between.two.seconds.and.thirty.seconds.long.  
1) On.the.base,.press.MENU/SELECT..  
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Record Greeting.submenu.  
3) Record Greeting,.Start [select].appears..Press.MENU/SELECT.to.start.the.recording..Begin.recording.after.the.  
announcement..The.message counter.on.the.base.LCD.displays.“30”,.and.then.begins.to.count.down.  
4) When you finish recording, press MENU/SELECT.again.or.press. . You will hear a confirmation tone, and  
your.recorded.greeting.plays.back.for.you.  
Selecting a Greeting  
You.can.switch.back.and.forth.between.the.pre-recorded.greeting.and.your.own.greeting.at.any.time.  
1) On.the.base,.press.MENU/SELECT..  
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Greeting.Options.submenu..The.system.plays.the.current.greeting.  
3) To.keep.this.greeting,.do.nothing..To.switch.to.the.other.greeting,.press. .or. .on.the.four-way.function.key.  
while.the.system.is.playing.the.current.greeting.  
4) Each.time.you.press. .or. ,.the.system.switches.between.the.pre-recorded.and.the.personal.greeting..The.  
last.greeting.you.hear.is.used.as.the.current.greeting.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Deleting Your Personal Greeting  
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.  
1) On.the.base,.press.MENU/SELECT..  
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Greeting.Options.submenu..The.system.plays.the.current.greeting.  
3) While.the.personal.greeting.is.playing,.press.  
.
4) The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.  
Selecting the Language for Announcements  
You.can.select.the.language.of.your.answering.system.announcements..The.default.system.language.is.English.  
1) Press.MENU/SELECT..  
ꢀ) Select.Ans. Setup,.and.then.the.Ans. Language.submenu.  
3) Move.the.cursor.to.choose.a.language..  
for US models:..  
Choose.English.or.Español.(Spanish)..  
for Canadian models:..Choose.English.or.Français.(French).  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Setting the Number of Rings  
The.ring.time.setting.allows.you.to.set.the.number.of.rings.(ꢀ,.4,.or.6).the.caller.hears.before.your.answering.system.  
picks.up..If.you.select.Toll Saver,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.  
four.rings.if.there.are.none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.  
after.the.third.ring.to.avoid.long.distance.billing.charges.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Ring Time.submenu.  
3) Move.the.cursor.to.select.a.ring.time.(Toll Saver,.2.Times,.4.Times,.or.6.Times).  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting the Record Time (or Announce only)  
You.can.choose.how.many.minutes.(1.or.4).callers.have.to.record.a.message..If.you.select.Announce Only,.the.  
answering.system.answers.the.call.but.prevents.callers.from.leaving.a.message.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Record Time.submenu.  
3) Move.the.cursor.to.select.a.record.time.(1 Minute,.4.Minutes,.or.Announce Only).  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
While.your.answering.system.is.set.to.Announce Only,.the.message counter.on.the.base.LCD.displays.“A.”.If.you.  
are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.is.  
available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.that.  
greeting.  
Activating the Message Alert  
The message alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.  
To.turn.on.the.message.alert:  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Message Alert.submenu.  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Activating the Base Call Screen  
With.the.call.screen.feature,.you.can.listen.to.callers.as.they.leave.a.message.without.answering.the.call.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Ans. Setup.menu.and.then.the.Call Screen.submenu.  
3) Move.the.cursor.to.select.On.or.Off.  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Answering System  
Turning Your Answering System On and Off  
From the base  
From the handset  
1) Press.MENU/SELECT..  
1) With.the.phone.in.standby,.press..  
ANSWEr oN/oFF.  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.  
ꢀ) The.system.announces.“Answering.System.  
Ans. On/Off.submenu.  
Turning.On  
is.on”.and.plays.the.current.greeting.  
3) Move.the.cursor.to.select.On.  
3) Answering System On.appears.on.the.base.  
4) Press.MENU/SELECT..You.will.hear.a.  
display.  
confirmation tone.  
1) With.the.phone.in.standby,.press..  
1) Press.MENU/SELECT..  
ANSWEr oN/oFF.  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.  
ꢀ) The.phone.announces.“Answering.System.  
Ans. On/Off.submenu.  
Turning.Off  
is.off.”  
3) Move.the.cursor.to.select.Off.  
3) Answering System Off.appears.on.the.base.  
4) Press.MENU/SELECT..You.will.hear.a.  
display.  
confirmation tone.  
Notes:.•.If.the.answering.system.announces.“No.remaining.time”.when.you.turn.it.on,.the.memory.is.full.(the.  
message counter.on.the.base.LCD.also.shows.FL)..The.answering.system.can’t.record.any.new.messages.  
until.you.delete.some.of.the.saved.ones.  
.
•.If.you.do.not.set.the.clock,.your.messages.may.not.have.the.correct.day.and.time.stamp..To.set.the.clock,.  
see.page.ꢀ3.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Operation from the Handset  
You.can.operate.your.answering.system.from.the.handset.whenever.the.phone.is.in.standby.  
• Press. /MUTE.to.start.remote.operation.  
Command  
1:Repeat  
Use it to  
• During.remote.operation,.the.phone.beeps.to.let.you.  
know.it’s.waiting.for.your.next.command.  
Repeat a message  
Play messages  
2:Play  
• Press.the.number.listed.next.to.the.commands..(see.the.  
table.for.a.list.of.all.available.commands)..  
3:Skip  
Skip a message  
• Use.the.left.and.right.keys.to.scroll.through.the.  
commands.(see.the.table.for.a.list.of.all.available.  
commands),.and.press.MENU/SELECT..You.can.also.  
press.the.number.listed.next.to.the.commands.instead.of.  
scrolling.through.them.  
4:Delete  
Delete a message  
Stop the current operation  
Choose a greeting  
Record a new greeting  
5:Stop  
6:SelectGreeting  
8:RecNewGreeting  
When you’re finished, press END.or.just.hang.up.  
• If.you.don’t.press.any.keys.for.thirty.seconds,.the.phone.  
will.return.to.standby.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Reviewing Messages  
The.message counter.on.the.base.LCD.displays.the.number.of.messages.stored.in.memory..When.you.have.new.  
messages.(that.you.have.not.listened.to.yet),.  
.on.the.base.and.the.new message LED on the handset flash.  
The answering system plays your new messages first. If you have no new messages, the system plays your old  
messages..You.can.review.your.messages.from.the.base.or.from.the.handset:  
From the base  
From the handset  
Press. /MUTE..The.system.announces.the.  
number.of.new.and.old.messages,.then.plays.the.  
first new message followed by the day and time  
it.was.received..Then.the.system.plays.the.new.  
messages.in.the.order.they.were.received..  
Press.  
..The.system.announces.the.number.  
of new and old messages, then plays the first  
new.message.followed.by.the.day.and.time.it.  
was.received..Then.the.system.plays.the.new.  
messages.in.the.order.they.were.received.  
Playing.new.  
messages  
Press  
current.message..Press.  
back.to.a.previous.message..  
.once.to.go.to.the.beginning.of.the.  
Press.1.once.to.go.to.the.beginning.of.the.current.  
message..Press.1.repeatedly.to.go.back.to.a.  
previous.message.  
Repeating  
a.message  
.repeatedly.to.go.  
Skipping  
a.message message..  
Press. .to.go.to.the.beginning.of.the.next.  
Press.3.to.go.to.the.beginning.of.the.next.  
message.  
Deleting  
While.a.message.is.playing,.press. ...  
While.a.message.is.playing,.press.4.  
The.message.is.permanently.deleted..  
a.message The.message.is.permanently.deleted..  
While.the.phone.is.in.standby,.press. ..When.  
Deleting.all.  
messages  
the system asks you to confirm, press  
.
Not.available.  
again..All.messages.are.permanently.deleted.  
Playing.old. After.you.listen.to.your.new.messages,.press.. After.you.listen.to.your.new.messages,.press..  
messages  
.again.to.play.your.old.messages.  
/MUTE.again.to.play.your.old.messages.  
Ending.the.  
message.  
review  
Press.5.to.stop.the.message.playback.  
Press.END.to.exit.the.system.and.return.to.standby,.  
or.press.2.to.restart.the.message.playback.  
Press.  
return.to.standby..  
.to.stop.the.message.playback.and.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Screening Calls  
From the base  
From the handset  
• While.the.system.is.taking.the.message,.simply.  
listen.to.the.caller.over.the.base.speaker..(You.  
need.to.activate.the.base.call.screen.feature.in.  
advance..See.page.45.).  
• While.the.systems.is.recording.the.message,.press..  
/MUTE..If.another.handset.is.screening.a.call,.you.will.  
hear.a.beep.and.you.will.not.be.able.to.screen.the.call.  
To.answer.the.call.and.speak.to.the.caller,.press.TALK/  
FLASH.  
To.answer.the.call.and.speak.to.the.caller,.pick.up.  
the.corded.handset.from.the.base.or.press.  
To.mute.the.call.screen.and.allow.the.caller.to.  
.
To.mute.the.call.screen.and.allow.the.caller.to.continue.  
leaving.the.message,.press.END.or.return.the.handset.  
to.the.cradle.  
continue.leaving.the.message,.press.  
.
Turning Off the Message Alert Tone  
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.  
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.  
Operating the Answering System While You Are Away from Home  
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.  
Setting a security code or Personal Identification Number (PIN)  
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.  
Personal Identification Number (PIN). The default security code is 80.  
1) Press.MENU/SELECT..  
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Security Code.submenu.  
3) Use.the.number.keypad.(0.through.9).to.enter.a.two-digit.security.code.(01-99).  
4) Press.MENU/SELECT. You will hear a confirmation tone.  
Dialing in to your answering system  
Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.  
return.to.standby.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:  
1) Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.  
about.ten.rings.and.sounds.a.series.of.beeps.  
ꢀ) During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.0.and.enter.your.security.code/PIN.within.  
two.seconds.  
3) The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..  
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.  
4) Enter a remote command from the chart below. You have fifteen seconds to enter the first command; after the  
first command, you have two seconds to enter each command.  
If you want to  
Press  
If you want to  
Press  
0.then.2.  
The.answering.system.plays.back.  
messages.for.four.minutes,.then.  
waits.for.another.command..To.  
continue.playing.your.messages,.  
press.0.then.2.again.  
Play.incoming.  
messages  
Stop.the.current.operation.to.  
enter.a.different.command.  
0.then.5  
0.then.1 (after the first four  
seconds.of.this.message)  
Repeat.this.message.  
Turn.the.answering.system.off  
Turn.the.answering.system.on  
0.then.9  
Go.back.to.the.  
previous.message  
0.then.1 during the first four  
seconds.of.a.message.  
0.then.6  
Skip.this.message  
0.then.3  
Listen.to.the.help.prompts  
Exit.the.system  
1.then.0  
Delete.this.message 0.then.4  
Hang.up.  
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.  
Enter another command from the chart within fifteen seconds.  
6) Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall Mounting the Base  
This.phone.can.be.mounted.on.any.standard.telephone.wall.plate.  
Snap the stand  
into the notches  
marked WALL  
on the bottom of  
the base.  
Remove the stand  
from the base.  
K
S
E
D
WALL  
L
L
A
W
ALL  
W
Connect the AC adapter and the  
telephone cords as shown on pages  
9 and 10. Remember to route the AC  
adapter cord through the channel on  
the bottom of the base.  
Route the AC adapter cord  
through the molded wiring  
channel on the bottom of  
the stand, and let the cord  
hang below the stand.  
Plug the telephone  
cord into the wall  
jack. Route the  
telephone cord  
through the  
molded wiring  
channel on the  
bottom of the  
(To AC outlet)  
stand as shown.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Place the mounting slots over the  
pins on the wall plate.  
Wall plate  
Slide the base  
down to lock it  
into place.  
(To AC outlet)  
On the base unit, pull the handset  
retainer out of the slot.  
Notes:.Mounting.the.phone.directly.on.the.wall  
Rotate it clockwise 180 degrees and  
flip the retainer from front to back.  
Slide it back into the slot.  
• Be.sure.the.wall.is.capable.of.supporting.the.weight.  
of.the.phone,.and.use.the.proper.type.of.anchoring.  
device.for.the.wall.material.  
• Insert.two.#10.screws.(minimum.length.of.1.3/8.  
inches,.not.supplied).into.the.wall,.3.15/16.inches.  
apart..  
The retainer holds the corded  
handset in place.  
• Leave.the.screw.heads.1/8.inch.away.from.the.wall.to.  
allow.room.for.mounting.the.phone..  
• Align.the.mounting.slots.over.the.screws.and.slide.  
the.base.down.into.place.as.shown.above.  
5ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Specifications  
Operating temperature 3ꢀ°.F.to.1ꢀꢀ°.F.(0°.C.to.50°.C)  
Base  
Charging cradle  
PS-0007  
Part number  
Input voltage  
Output voltage  
Part number  
Capacity  
PS-0008  
AC adapter  
1ꢀ0V.AC,.60.Hz  
9V.DC.@.ꢀ10mA  
BT-1015  
1ꢀ0V.AC,.60.Hz  
9V.DC.@.ꢀ10mA  
Battery pack  
650mAh,.ꢀ.4V.DC  
Notes:  
• Use.only.the.supplied.AC.adapters.  
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.charging.cradles.  
Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or  
electrical.hazard.  
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.  
Battery Information  
Battery life  
With.average.use,.your.handset.battery.provides.more.than.ten.hours.of.talk.time.and.approximately.seven.days.  
of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.base.or.  
charging.cradle.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.  
if.the.handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.  
handset.is.off.of.the.cradle.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Low battery alert  
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.  
order.to.save.power..When.Low Battery - Charge Handset.appears.in.the.handset.display.  
and.the.phone.is.in.standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.  
your.conversation.as.quickly.as.possible,.and.return.the.handset.to.the.cradle.  
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.  
Cleaning the charging contacts  
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.  
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.  
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.  
thoroughly.before.returning.the.handset.to.the.cradle.  
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..  
Doing so may discolor the surface of the telephone and damage the finish.  
Contacts  
Battery replacement and handling  
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.  
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.on.the.back.cover.page.  
Caution:  
• Use.only.battery.pack.BT-1015..  
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..  
Never throw the battery into a fire, disassemble, or heat them.  
• Do.not.remove.or.damage.the.battery.casing..  
Power Failures  
During.a.power.failure,.you.can.make.and.receive.calls.with.the.base.corded.handset;.however,.you.will.not.be.able.  
to.use.the.base.speakerphone.or.the.cordless.handset..See.page.30.for.available.features.with.the.base.corded.  
handset.during.a.power.failure.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Common Issues  
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve  
your.problem,.please.call.our.Customer.Hotline.(see.the.back.cover.for.contact.information).  
When you have this  
Try...  
problem...  
The.charge.LED.won’t.  
• Checking.the.AC.adapter.connection.(see.page.8).  
illuminate.when.the.cordless.  
• Re-seating.the.handset.in.the.cradle..  
handset.is.placed.in.the.  
• Cleaning.the.charging.contacts.on.the.handsets.(see.page.54).  
cradle.  
• Checking.the.telephone.cord.connection..If.Check TEL Line.appears.on.the.base.  
or.handset.display,.the.telephone.cord.may.not.be.connected.correctly.(see.page.  
10).  
No.stations.can.make.or.  
receive.calls..  
• Disconnecting.the.base.AC.adapter..Wait.a.few.minutes,.then.reconnect.it.(see.  
page.9).  
• Changing.the.dial.mode.(see.page.1ꢀ).  
A.single.cordless.handset.  
can’t.make.or.receive.calls.  
(but.other.stations.can).  
• Moving.the.handset.closer.to.the.base.  
• Resetting.the.handset.(see.page.59).  
A.station.can.make.calls,.but.  
it.doesn’t.ring.or.receive.a.  
page.  
• Making.sure.the.ringer.isn’t.turned.off.(see.page.36).  
• Checking.the.battery.pack.connection.(see.page.7).  
• Charging.the.battery.for.15-ꢀ0.hours.  
• Resetting.the.handset.(see.page.59).  
A.cordless.handset.is.not.  
working.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
When you have this  
problem...  
Try...  
• Moving.the.handset.closer.to.the.base.  
• Seeing.if.another.station.has.Privacy.Mode.turned.on.(see.page.40).  
• Making.sure.the.base.is.plugged.in.(see.page.9).  
A.cordless.handset.says.  
Unavailable.  
The.phone.keeps.ringing.  
when.I.answer.on.an.  
extension.  
You.may.have.to.change.the.line.mode..Contact.customer.service.for.more.  
information.(see.page.61).  
• Making.sure.to.use.the.base.corded.handset.to.make.or.receive.a.call..  
(see.page.30).  
• Checking.the.telephone.cord.connection.(see.page.10).  
During.power.failure,.can't.  
make.or.receive.a.call.  
• Checking.to.see.if.the.call.was.placed.through.a.switchboard.  
• Asking.your.telephone.company.to.verify.your.Caller.ID.service.is.current..There.  
may.be.a.problem.with.your.Caller.ID.service.  
No.stations.will.display.any.  
Caller.ID.information.  
• Letting.incoming.calls.ring.at.least.twice.before.answering.  
Caller ID displays briefly and You.may.have.to.change.the.line.mode..Contact.customer.service.for.more.  
then.clears.  
information.(see.page.61).  
• Seeing.if.you.already.have.6.cordless.handsets.registered.to.this.base.  
• Seeing.if.you.already.registered.this.handset.to.4.bases.  
• Resetting.the.handset.(see.page.59).  
I.can’t.register.a.cordless.  
handset.at.the.base.  
A.cordless.handset.doesn’t.  
communicate.with.other.  
handsets..  
• Making.sure.all.handsets.are.registered.to.and.currently.connected.to.the.same.  
base.(see.pages.14.and.15).  
• Resetting.the.problem.handsets.(see.page.59).  
• Making.sure.all.handsets.are.registered.to.and.currently.connected.to.the.same.  
base.(see.pages.14.and.15).  
I.can’t.transfer.calls.  
• Resetting.the.problem.handsets.(see.page.59).  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you have this  
problem...  
Try...  
• Checking.to.see.that.there.are.not.two.handsets.already.using.the.conference.  
feature.(see.page.38).  
• Making.sure.another.station.is.not.in.Privacy.Mode.(see.page.40).  
• Making.sure.both.handsets.are.registered.to.and.currently.connected.to.the.same.  
base.(see.pages.14.and.15).  
I.can’t.get.two.cordless.  
handsets.to.talk.to.an.  
outside.caller.  
The.answering.system.does. • Checking.the.AC.adapter.connection.(see.page.9)..  
not.work.  
• Checking.to.see.if.the.answering.system.is.turned.on.(see.page.46).  
• The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.  
48).  
The.answering.system.does.  
not.record.any.messages.  
Checking.to.see.that.the.message.record.time.is.not.set.to.announce.only.(see.  
.
The.answering.system.  
doesn’t.say.what.time.  
messages.were.recorded.  
• Checking.to.see.if.you.have.set.the.time.(see.page.ꢀ3).  
• The.incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.  
• The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.  
Messages.are.incomplete..  
48).  
I.can’t.hear.base.or.handset.  
speaker.during.call.screening.  
or.message.playback.  
• Adjusting.the.speaker.volume.on.the.base.or.handset.(see.pages.36.and.37).  
• Checking.to.see.if.the.call.screen.feature.is.set.to.on.(see.page.45).  
I.can’t.access.answering.  
system.from.a.remote.  
phone..  
• Checking.to.see.if.you.are.using.the.correct.PIN.number.(see.page.49).  
• Checking.to.see.if.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.  
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Weak or Hard to Hear Audio  
If.the.caller’s.voice.sounds.weak.or.soft,.the.signal.might.be.blocked.by.large.metal.objects.or.walls;.you.might.also.  
be.too.far.from.the.base,.or.the.handset’s.battery.may.be.weak.  
• Try.adjusting.the.volume.of.the.earpiece.(see.page.36).or.the.audio.tone.(see.page.37).  
• Try.moving.around.while.you’re.on.a.call.or.moving.closer.to.the.base.to.see.if.the.sound.gets.louder.  
• Make.sure.the.handset’s.battery.is.fully.charged.  
Noise or Static on the Line  
The.most.common.cause.of.noise.or.static.on.a.cordless.phone.is.interference:.other.wireless.or.electronic.devices.  
can.radiate.energy.that.disturbs.the.radio.signal.between.the.base.and.the.handset.(much.like.overhead.power.lines.  
can.cause.static.on.your.car.radio)..Some.common.household.sources.of.interference.are  
• electrical.appliances,.especially.microwave.ovens.  
• computer.equipment,.especially.wireless.LAN.equipment.and.DSL.modems  
• radio-based.wireless.devices,.such.as.room.monitors,.wireless.controllers,.or.wireless.headphones.or.speakers  
large florescent light fixtures (particularly ones that give off a “buzzing” noise)  
• other.services.that.use.your.phone.line,.like.alarm.systems,.intercom.systems,.or.broadband.Internet.service  
For static on only one handset or in a specific location:  
For.static.on.more.than.one.handset:  
• Check.nearby.for.one.of.the.common.interference.  
sources.  
• Try.moving.the.handset.away.from.a.suspected.  
• Check.near.the.base.for.the.source.of.interference.  
• Try.moving.the.base.away.from.a.suspected.source,.  
or.try.turning.off.the.source.if.possible.  
source,.or.try.moving.the.suspected.source.so.it’s.not. • If.you.have.any.services.that.might.use.your.phone.  
between.the.handset.and.the.base. line, see if you need a filter on the phone line.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing a telephone line filter or DSL filter  
Telephone  
wall jack  
Any.broadband.Internet.service.that.uses.your.telephone.  
line.might.interfere.with.standard.phones..The.most.common.type.  
of.these.services,.DSL,.often.causes.static.on.your.telephone..  
Fortunately, an easy-to-install filter removes this static from the line.  
Technicians who install DSL service usually leave several filters for  
the customers; if you can’t find them, call your DSL provider or look  
in.any.electronics.store.  
Telephone  
cord  
DSL filter  
Just plug the DSL filter into the telephone wall jack and then plug  
your phone’s base into the filter. Make a test call to make sure the  
noise.is.gone.  
Resetting the Handset  
You.may.need.to.reset.your.handset.in.the.following.instances:  
You.lose.a.handset.and.purchase.a.new.one.  
You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.  
You.are.unable.to.register.any.handsets.to.the.base.  
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.  
as.“Handset.#4”.but.you.only.have.two.handsets.)  
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.  
1) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.15).  
ꢀ) Press.and.hold.END.and.# for more than five seconds. Select Deregister HS.  
3) Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.  
4) The phone will ask you to confirm the deregistration. Select Yes..The.selected.handset.will.clear.its.registration.  
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.  
memory.  
5) When.the.base.information.is.deleted,.the.handset.displays.Handset not registered-place handset on base to  
register. See your Owner’s Manual for help.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6) Re-register.the.handset.to.the.base.(see.Registering.accessory.handsets.on.page.13)..  
If.the.handset.cannot.contact.the.base,.it.will.display.Out Of Range..Make.sure.the.handset.is.in.range.of.the.base.  
and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).  
Resetting the Handset Without the Base  
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.  
1) Press.and.hold.END.and.# for at least five seconds.  
ꢀ) Move.the.cursor.to.select.Base Unavailable.and.then.press.MENU/SELECT.  
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.MENU/SELECT..Base Unavailable.appears.  
4) Move.the.cursor.to.select.Yes,.and.then.press.MENU/SELECT. You hear a confirmation tone, and the handset  
deletes.its.own.base.information.without.contacting.the.base..If.the.handset.was.registered.to.only.one.base,.  
it.displays.Handset not registered-place handset on base to register. See your Owner’s Manual for help..If.the.  
handset.is.still.registered.to.another.base,.it.searches.for.the.other.base.and.then.returns.to.standby.  
5) Register.the.handset.to.the.new.base.(see.Registering.accessory.handsets.on.page.13).  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Line Mode for Multiple Extensions  
Line.mode.refers.to.the.method.that.telephones.use.to.signal.each.other.that.an.extension.is.in.use..Customer.  
service.may.recommend.changing.the.line.mode.if.you.have.any.of.the.following.problems:  
Your.phone.keeps.ringing.after.someone.answers.on.an.extension.phone.  
Your.answering.system.doesn’t.stop.recording.when.you.answer.on.an.extension.phone.  
Caller ID displays briefly and then clears.  
1) If.you.set.from.a.handset.and.you.have.multiple.bases,.select.the.base.that.is.having.problems.(see.page.15).  
ꢀ) Press.MENU/SELECT..  
3) Select.the.Global Setup.menu,.and.then.the.Set Line Mode.submenu..  
4) If Instructed by Customer Service Press [select].appears..Press.MENU/SELECT.  
5) Move.the.cursor.to.select.Type - A,.Type - B,.or.Off.  
6) Press.MENU/SELECT. You will hear a confirmation tone.  
Traveling Out of Range  
When.the.handset.is.in.standby,.the.handset.will.display.Out Of Range.  
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.  
base,.the.handset.will.beep,.display.Out Of Range,.and.then.go.to.standby..The.base.will.maintain.the.connection.  
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.  
thirty.seconds,.press.TALK/FLASH.or. .to.pick.up.the.call.again.  
Note:.. If.it.is.set.to.automatically.select.the.available.base,.the.handset.will.begin.searching.for.another.base.thirty.  
seconds.after.going.out.of.range..(see.Selecting.the.base.on.page.15).  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Liquid Damage  
Moisture.and.liquid.can.damage.your.cordless.phone.  
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.  
the.liquid,.and.use.as.normal..  
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.  
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below..After.following.these.steps,.if.  
your.cordless.telephone.does.not.work,.please.call.our.Customer.Service.Hotline.(see.the.back.cover.page).  
Handset  
Base  
1) Remove.the.battery.cover.and.leave.it.off.for.  
1) Disconnect.the.AC.adapter.from.the.base,.cutting.  
ventilation.  
off.electrical.power.  
ꢀ) Disconnect.the.battery.pack..Leave.the.battery.  
cover.off.and.the.battery.pack.disconnected.for.at.  
least.3.days.  
ꢀ) Disconnect.the.telephone.cord.from.the.base.  
3) Let.dry.for.at.least.3.days..  
3) Once.the.handset.is.completely.dry,.reconnect.the.  
battery.pack.and.the.battery.cover.  
4) Recharge.the.handset’s.battery.pack.for.15.to.ꢀ0.  
hours.before.using..  
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.  
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
6ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
Precautions!  
Before.you.read.anything.else,.please.observe.the.following:  
Warning!  
Uniden.voluntarily.participates.in.an.RBRC®.  
Uniden.America.Corporation.DOES.NOT.represent.this.unit.  
to be waterproof. To reduce the risk of fire, electrical shock,  
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.  
moisture.  
industry.program.to.collect.and.recycle.nickel-cadmium.  
batteries.at.the.end.of.their.useful.life,.when.taken.out.of.  
service.within.the.United.States..  
The.RBRC®.program.provides.a.convenient.alternative.to.  
placing.used.nickel-cadmium.batteries.into.the.trash.or.  
municipal.waste.stream,.which.is.illegal.in.some.areas.  
Through.the.RBRC®.program,.Uniden.makes.it.easy.  
for.you.to.drop.off.the.used.battery.at.local.retailers.of.  
replacement.nickel-cadmium.batteries..You.may.also.  
contact.your.local.recycling.center.for.information.on.  
where.to.return.the.used.battery...  
Rechargeable Nickel-Cadmium Battery  
Warning  
This.equipment.contains.a.rechargeable.nickel-cadmium.  
battery..  
The.rechargeable.batteries.contained.in.this.equipment.  
may explode if disposed of in a fire.  
Nickel.and.Cadmium.are.a.chemical.known.to.state.of.  
California.to.cause.cancer..  
Please.call.1-800-8-BATTERY.for.information.on.Ni-Cd.  
battery.recycling.in.your.area..Uniden’s.involvement.in.  
this.program.is.part.of.its.commitment.to.protecting.our.  
environment.and.conserving.natural.resources.  
RBRC®.is.a.registered.trademark.of.the.Rechargeable.  
Battery.Recycling.Corporation.  
Do.not.short-circuit.the.battery..  
Do.not.charge.the.rechargeable.battery.pack.used.in.  
this.equipment.with.in.any.charger.other.than.the.one.  
designed to charge this battery pack as specified in the  
owner's.manual..Using.another.charger.may.damage.the.  
battery.pack.or.cause.the.battery.pack.to.explode..  
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.  
in.our.products.and.accessories.  
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.  
Properly..  
Warning!  
The.cords.on.this.product.and/or.accessories.contain.lead,.a.  
chemical.known.to.the.State.of.California.to.cause.birth.defects.  
or.other.reproductive.harm..Wash.hands.after.handling.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important Safety Instructions  
The FCC Wants You To Know  
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.  
the.requirements.adopted.by.the.ACTA..On.the.bottom.of.this.  
equipment.is.a.label.that.contains,.among.other.information,.a.  
product identifier in the format US: AAAEQ##TXXXX. If requested,  
this.number.must.be.provided.to.the.telephone.company.  
When.using.your.telephone.equipment,.basic.safety.  
precautions.should.always.be.followed.to.reduce.the.risk.  
of fire, electric shock and injury to persons, including the  
following:.  
1. Do.not.use.this.product.near.water,.for.example,.near.  
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.  
wet.basement.or.near.a.swimming.pool..  
An applicable Universal Service Order Codes (USOC) certification  
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJ11C).in.  
the.packaging.with.each.piece.of.approved.terminal.equipment..  
A.plug.and.jack.used.to.connect.this.equipment.to.the.premises.  
wiring.and.telephone.network.must.comply.with.the.applicable.FCC.  
Part.68.rules.and.requirements.adopted.by.the.ACTA..A.compliant.  
telephone.cord.and.modular.plug.is.provided.with.this.product..It.is.  
designed.to.be.connected.to.a.compatible.modular.jack.that.is.also.  
compliant..See.installation.instructions.for.details.  
. Avoid.using.a.telephone.(other.than.a.cordless.type).  
during.an.electrical.storm..There.may.be.a.remote.risk.  
of.electric.shock.from.lightning..  
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.  
vicinity.of.the.leak..  
4. Use.only.the.power.cord.and.batteries.indicated.in.  
this manual. Do not dispose of batteries in a fire. They  
may.explode..Check.with.local.authorities.for.possible.  
battery.disposal.instructions..  
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.  
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.  
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.  
call..In.most.but.not.all.areas,.the.sum.of.RENs.should.not.exceed.  
five (5.0). To be certain of the number of devices that may be  
connected.to.a.line,.as.determined.by.the.total.RENs,.contact.the.  
telephone.provider..For.products.approved.after.July.ꢀ3,.ꢀ001,.the.  
REN for this product is part of the product identifier that has the  
format US:AAAEQ##TXXXX. The digits represented by ## are the  
REN.without.a.decimal.point.(e.g.,.03.is.a.REN.of.0.3)..For.earlier.  
products,.the.REN.is.separately.shown.on.the.label.  
5. Do.not.disassemble.any.component.of.this.product.  
SAVE THESE INSTRUCTIONS  
CAUTION..  
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..  
Dispose.of.used.batteries.according.to.the.instructions..Do.not.  
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.  
shipping.this.product.  
If.this.equipment.causes.harm.to.the.telephone.network,.the.  
telephone.company.will.notify.you.in.advance.that.temporary.  
discontinuance.of.service.may.be.required..But.if.advance.notice.  
isn’t.practical,.the.telephone.company.will.notify.the.customer.as.  
soon as possible. Also, you will be advised of your right to file a  
complaint.with.the.FCC.if.you.believe.it.is.necessary..The.telephone.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
company.may.make.changes.in.its.facilities,.equipment,.operations.  
or.procedures.that.could.affect.the.operation.of.the.equipment..If.  
this.happens.the.telephone.company.will.provide.advance.notice.  
in order for you to make necessary modifications to maintain  
uninterrupted.service.  
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.  
for.the.amount.of.radio.frequency.energy.various.products.may.  
produce.depending.on.their.intended.usage..This.product.has.  
been.tested.and.found.to.comply.with.the.FCC’s.exposure.criteria..  
For.body.worn.operation,.the.FCC.RF.exposure.guidelines.were.  
also.met.when.used.with.the.Uniden.accessories.supplied.or.  
designed.for.this.product..Use.of.other.accessories.may.not.ensure.  
compliance.with.FCC.RF.exposure.guidelines.and.should.be.  
avoided.  
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.  
replacement.section);.otherwise.do.not.substitute.or.repair.any.  
parts of the device except as specified in this manual. Connection  
to.party.line.service.is.subject.to.state.tariffs..Contact.the.state.  
public.utility.commission,.public.service.commission.or.corporation.  
commission.for.information..This.equipment.is.hearing.aid.  
compatible.  
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.  
a.separation.distance.of.at.least.ꢀ0.cm.from.all.persons.and.must.  
not.be.collocated.or.operated.in.conjunction.with.any.other.antenna.  
or.transmitter.  
Should.you.experience.trouble.with.this.equipment,.please.contact.  
Uniden.customer.service.at.800-ꢀ97-10ꢀ3..If.the.equipment.is.  
causing.harm.to.the.telephone.network,.the.telephone.company.  
may.request.that.you.disconnect.the.equipment.until.the.problem.is.  
resolved..  
If.your.home.has.wired.alarm.equipment.connected.to.a.phone.  
line,.be.sure.that.installing.the.system.does.not.disable.your.alarm.  
equipment..If.you.have.questions.about.what.will.disable.alarm.  
equipment, contact your telephone company or a qualified installer.  
NOTICE:.According.to.telephone.company.reports,.AC.electrical.  
surges,.typically.resulting.from.lightning.strikes,.are.very.destructive.  
to.telephone.equipment.connected.to.AC.power.sources..To.  
minimize.damage.from.these.types.of.surges,.a.surge.arrestor.is.  
recommended.  
Note:.This.equipment.has.been.tested.and.found.to.comply.with.the.  
limits.for.a.Class.B.digital.device,.pursuant.to.part.15.of.the.FCC.  
Rules..These.limits.are.designed.to.provide.reasonable.protection.  
against.harmful.interference.in.a.residential.installation..This.  
equipment.generates,.uses.and.can.radiate.radio.frequency.energy.  
and,.if.not.installed.and.used.in.accordance.with.the.instructions,.  
may.cause.harmful.interference.to.radio.communications..However,.  
there.is.no.guarantee.that.interference.will.not.occur.in.a.particular.  
installation..If.this.equipment.does.cause.harmful.interference.to.  
radio.or.television.reception,.which.can.be.determined.by.turning.  
the.equipment.off.and.on,.the.user.is.encouraged.to.try.to.correct.  
the.interference.by.one.or.more.of.the.following.measures:  
Changes or modifications to this product not expressly approved  
by.Uniden,.or.operation.of.this.product.in.any.way.other.than.as.  
detailed.by.the.owner’s.manual,.could.void.your.authority.to.operate.  
this.product.  
This.device.complies.with.part.15.of.the.FCC.rules..Operation.  
is.subject.to.the.following.two.conditions:.(1).This.device.may.  
not.cause.harmful.interference,.and.(ꢀ).This.device.must.accept.  
any.interference.received,.including.interference.that.may.cause.  
undesired.operation..Privacy.of.communications.may.not.be.  
ensured.when.using.this.phone.  
--Reorient.or.relocate.the.receiving.antenna.  
--Increase.the.separation.between.the.equipment.and.receiver.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
--Connect.the.equipment.into.an.outlet.on.a.circuit.different.from..  
...that.to.which.the.receiver.is.connected.  
I.C. Notice  
Terminal equipment  
--Consult.the.dealer.or.an.experienced.radio/TV.technician.for.help.  
NOTICE:.This.equipment.meets.the.applicable.Industry.  
Canada Terminal Equipment Technical Specifications. This is  
confirmed by the registration number. The abbreviation, IC,  
before the registration number signifies that registration was  
performed.based.on.a.Declaration.of.Conformity.indicating.that.  
Industry Canada technical specifications were met. It does not  
imply.that.Industry.Canada.approved.the.equipment.  
Radio interference  
Radio.interference.may.occasionally.cause.buzzing.and.humming.  
in.your.cordless.handset,.or.clicking.noises.in.the.base..This.  
interference.is.caused.by.external.sources.such.as.TV,.refrigerator,.  
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is  
NOT.DEFECTIVE..If.these.noises.continue.and.are.too.distracting,.  
please.check.around.your.home.to.see.what.appliances.may.be.  
causing.the.problem..In.addition,.we.recommend.that.the.base.  
not.be.plugged.into.a.circuit.that.also.powers.a.major.appliance.  
because.of.the.potential.for.interference..In.the.unlikely.event.that.  
you.consistently.hear.other.voices.or.distracting.transmissions.  
on.your.phone,.you.may.be.receiving.radio.signals.from.another.  
cordless.telephone.or.other.source.of.interference.  
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.  
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.  
assigned.to.each.terminal.equipment.provides.an.indication.  
of.the.maximum.number.of.terminals.allowed.to.be.connected.  
to.a.telephone.interface..The.termination.on.an.interface.may.  
consist.of.any.combination.of.devices.subject.only.to.the.  
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.  
of all the devices does not exceed five.  
Finally,.it.should.be.noted.that.some.cordless.telephones.operate.  
at.frequencies.that.may.cause.interference.to.nearby.TVs.and.  
VCRs..To.minimize.or.prevent.such.interference,.the.base.of.the.  
cordless.telephone.should.not.be.placed.near.or.on.top.of.a.TV.or.  
VCR..If.interference.is.experienced,.moving.the.cordless.telephone.  
farther.away.from.the.TV.or.VCR.will.often.reduce.or.eliminate.the.  
interference..  
Radio equipment  
The term “IC:” before the radio certification number only signifies  
that Industry Canada technical specifications were met.  
Cordless telephone privacy  
Operation.is.subject.to.the.following.two.conditions:.(1).this.  
device.may.not.cause.interference,.and.(ꢀ).this.device.must.  
accept.any.interference,.including.interference.that.may.cause.  
undesired.operation.of.the.device..“Privacy.of.communications.  
may.not.be.ensured.when.using.this.telephone.”  
Cordless.telephones.are.radio.devices..Communications.between.  
the.handset.and.base.of.your.cordless.telephone.are.accomplished.  
by.means.of.radio.waves.which.are.broadcast.over.the.open.  
airways..Because.of.the.inherent.physical.properties.of.radio.  
waves,.your.communications.can.be.received.by.radio.receiving.  
devices.other.than.your.own..  
cordless.telephone.unit..Consequently,.any.communications.using.  
your.cordless.telephone.may.not.be.private.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Replacement.and.handling....... 54  
H
Index  
Handset  
C
A
Accessory.handsets.................. 13  
Caller.ID....................................... 33  
Deleting.Caller.ID.records......... 34  
Making.calls.from...................... 33  
Call.screening......................... 45, 49  
Call.waiting................................... 35  
Chain.dialing................................. 3ꢀ  
Conferencing................................ 38  
Banner...................................... ꢀ9  
Choosing.a.ringer...................... ꢀ9  
Copying.phonebook.entries...... ꢀ8  
Entering.text.............................. ꢀꢀ  
Finding...................................... 38  
Parts.of.the.handset.................. 18  
Reading.the.display.................. ꢀ0  
Registering.......................... 13, 14  
Resetting............................. 59, 60  
Hanging.up................................... 31  
Hold.............................................. 38  
Accessibility.................................... 5  
Accessory.handsets..................... 13  
Answering.calls............................ 31  
Answering.system  
Reviewing.messages................ 48  
Setting.up.................................. 43  
Turning.on/off............................ 46  
When.away.from.home............. 49  
Any.key.answer............................ 30  
Area.code..................................... 34  
Audio.tone.................................... 37  
AutoTalk........................................ 30  
D
Day.and.time................................ ꢀ3  
Dial.mode............................... 1ꢀ, 41  
F
I
B
FCC.statements........................... 64  
Finding.a.handset......................... 38  
Four-way.function.key.................. ꢀ1  
Installation...................................... 6  
Intercom....................................... 40  
Banner.......................................... ꢀ9  
Base  
K
Installing...................................... 9  
Multiple.bases........................... 14  
Parts.of.the.base....................... 19  
Reading.the.display.................. ꢀ0  
Wall.mounting........................... 51  
Battery  
G
Key.touch.tone............................. ꢀ4  
Greetings  
L
Deleting..................................... 44  
Recording.................................. 43  
Selecting................................... 43  
Language  
Answering.system.  
Battery.life................................. 53  
Installing...................................... 7  
Low.battery.alert....................... 54  
announcements.................. 44  
Display...................................... ꢀ3  
Line.mode.for.base....................... 61  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Liquid.damage.............................. 6ꢀ  
Low.battery.alert........................... 54  
Deleting.entries................... ꢀ7, ꢀ8  
Editing.entries........................... ꢀ6  
Finding.entries.......................... ꢀ6  
Making.a.call.from..................... 3ꢀ  
Storing.Caller.ID.or.redial.  
numbers............................. ꢀ7  
Privacy.mode................................ 40  
Pulse.dialing........................... 1ꢀ, 41  
T
Text,.entering................................ ꢀꢀ  
Tone.dialing............................ 1ꢀ, 41  
Transferring.a.call......................... 39  
Troubleshooting............................ 55  
M
Maintenance................................. 53  
Making.calls.................................. 31  
Using.Caller.ID.......................... 33  
Using.redial............................... 35  
Using.the.phonebook................ 3ꢀ  
Message.alert......................... 45, 49  
Multiple.bases.............................. 14  
Mute  
V
Voice.mail..................................... 4ꢀ  
Waiting.indicator.reset............... 4ꢀ  
Volume,.adjusting......................... 36  
R
Redial  
Deleting.a.record....................... 35  
Making.a.calls.with.................... 35  
Ringer  
Choosing.a.handset.ringer........ ꢀ9  
Muting....................................... 36  
Personal.ring............................. ꢀ4  
Volume...................................... 36  
W
Microphone............................... 41  
Ringer....................................... 36  
Wall.mounting.the.base................ 51  
Warranty....................................... 71  
N
Noise............................................ 58  
O
S
Out.of.range................................. 61  
Safety.notices............................... 64  
Screening.calls....................... 45, 49  
Security.code................................ 49  
Selecting.the.base........................ 15  
Seven-digit.dialing........................ 34  
Static............................................ 58  
P
Personal identification number .  
(PIN)...................................... 49  
Personal.ring................................ ꢀ4  
Phonebook................................... ꢀ5  
Copying.entries......................... ꢀ8  
Creating.new.entries................. ꢀ5  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Operation Card  
CUT  
CUT  
REMOTE OPERATION CARD  
REMOTE OPERATION CARD  
Remote access  
away from home  
Remote access  
Turn on the answering  
system remotely  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop the  
announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
Turn on the answering  
system remotely  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop the  
announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
away from home  
1. Call your phone number from a  
1. Call your phone number from a  
touch-tone phone.  
touch-tone phone.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts.  
3. To quit, hang up the phone.  
3. To quit, hang up the phone.  
CUT  
CUT  
REMOTE OPERATION CARD  
REMOTE OPERATION CARD  
Remote access  
Remote access  
Turn on the answering  
system remotely  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop the  
announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
Turn on the answering  
system remotely  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop the  
announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
away from home  
away from home  
1. Call your phone number from a  
1. Call your phone number from a  
touch-tone phone.  
touch-tone phone.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts.  
3. To quit, hang up the phone.  
3. To quit, hang up the phone.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
C U T  
C U T  
Task  
Key  
Task  
Key  
Repeat a Message  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
Delete a Message  
Stop Operation  
Answering System On  
Answering System Off  
Help  
Answering System On  
Answering System Off  
Help  
C U T  
C U T  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Key  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Key  
Delete a Message  
Stop Operation  
Delete a Message  
Stop Operation  
Answering System On  
Answering System Off  
Help  
Answering System On  
Answering System Off  
Help  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.  
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.  
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES..  
One Year Limited Warranty  
Important:.Evidence.of.original.purchase.is.required.for.  
warranty.service..WARRANTOR:.UNIDEN.AMERICA.  
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.  
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.  
this.Uniden.Product.to.be.free.from.defects.in.materials.and.  
craftsmanship.with.only.the.limitations.or.exclusions.set.out.  
below..WARRANTY.DURATION:.This.warranty.to.the.original.  
user.shall.terminate.and.be.of.no.further.effect.1ꢀ.months.  
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.  
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.  
or necessary, (B) modified, altered, or used as part of any  
conversion kits, subassemblies, or any configurations not sold  
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.  
someone.other.than.an.authorized.Uniden.service.center.for.a.  
defect.or.malfunction.covered.by.this.warranty,.(E).used.in.any.  
conjunction.with.equipment.or.parts.or.as.part.of.any.system.  
not.manufactured.by.Uniden,.or.(F).installed.or.programmed.  
by.anyone.other.than.as.detailed.by.the.owner’s.manual.for.  
this.product..STATEMENT.OF.REMEDY:.In.the.event.that.the.  
product.does.not.conform.to.this.warranty.at.any.time.while.this.  
warranty.is.in.effect,.warrantor.will.either,.at.its.option,.repair.or.  
replace.the.defective.unit.and.return.it.to.you.without.charge.for.  
parts,.service,.or.any.other.cost.(except.shipping.and.handling).  
incurred.by.warrantor.or.its.representatives.in.connection.with.  
the.performance.of.this.warranty..Warrantor,.at.its.option,.may.  
replace.the.unit.with.a.new.or.refurbished.unit..THE.LIMITED.  
WARRANTY.SET.FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.  
WARRANTY.PERTAINING.TO.THE.PRODUCT.AND.IS.IN.  
LIEU.OF.AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.  
ANY.NATURE.WHATSOEVER,.WHETHER.EXPRESS,.  
IMPLIED.OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.  
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.  
MERCHANTABILITY.OR.FITNESS.FOR  
Some.states.do.not.allow.this.exclusion.or.limitation.of.  
incidental.or.consequential.damages.so.the.above.limitation.or.  
exclusion.may.not.apply.to.you.  
LEGAL REMEDIES: This warranty gives you specific legal  
rights,.and.you.may.also.have.other.rights.which.vary.from.  
state.to.state..This.warranty.is.void.outside.the.United.States.  
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.  
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.  
instructions.in.the.owner’s.manual.you.are.certain.that.the.  
Product.is.defective,.pack.the.Product.carefully.(preferably.  
in.its.original.packaging)..Disconnect.the.battery.from.the.  
Product.and.separately.secure.the.battery.in.its.own.separate.  
packaging.within.the.shipping.carton..The.Product.should.  
include.all.parts.and.accessories.originally.packaged.with.the.  
Product..Include.evidence.of.original.purchase.and.a.note.  
describing.the.defect.that.has.caused.you.to.return.it..The.  
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.  
to.warrantor.at:.  
Uniden America Service  
4700.Amon.Carter.Blvd.  
Fort.Worth,.TX.76155  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
VISIT OUR WEBSITE AT  
WWW.UNIDEN.COM IF YOU...  
...HAVE A QUESTION OR A PROBLEM.  
Or call our Customer Hotline at 1-800-297-1023 during regular business hours.*  
...ARE LOOKING FOR A PART OR ACCESSORY.  
Or call our Parts Department at 1-800-554-3988 during regular business hours.*  
...NEED SPECIAL ASSISTANCE DUE TO A DISABILITY.  
Or call our Accessibility help line at 1-800-874-9314 (voice or TTY).  
© 2008 Uniden America Corp.,  
Fort Worth, Texas. Printed In China.  
UCZZ01580EZ(0)  
* Central Standard Time. Detailed  
customer service hours are available  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Team Products Drill CM9130 User Manual
Technicolor Thomson CRT Television M5110C User Manual
THB Bury Automobile Accessories LT 9100 User Manual
TIMEX Weather Products Indoor Furnishings GL 05 User Manual
Toshiba Answering Machine ES4 User Manual
Toshiba CRT Television 27DF47 User Manual
Tricity Bendix Refrigerator TB 89 L User Manual
Tripp Lite Welding System APINT Series User Manual
ViewSonic Projector VS12617 User Manual
Visioneer Scanner 9420 USB User Manual