7000A
Digital Telephone Answering Machine
Operating Guide
for Australia and New Zealand
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Safety Information . . . . . . . . . . . . . . . . . . . . . . .5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Parts Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Selecting a Location . . . . . . . . . . . . . . . . . . . . .15
Connecting the DTAM to the Telephone Line . . . .15
Connecting Power . . . . . . . . . . . . . . . . . . . . . . .16
Backup Battery . . . . . . . . . . . . . . . . . . . . . . . . .16
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting the Day and Time . . . . . . . . . . . . . . . . . .19
Recording the Outgoing Messages . . . . . . . . . . .20
Setting the Number of Rings . . . . . . . . . . . . . . . .23
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . .25
Setting the DTAM to Answer Calls . . . . . . . . . . . .25
Setting the DTAM to Announce only . . . . . . . . . .25
Turning the DTAM off . . . . . . . . . . . . . . . . . . . .25
Recording Incoming Messages . . . . . . . . . . . . . .26
Continued over....
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CONTENTS
Screening Calls . . . . . . . . . . . . . . . . . . . . . . . . .26
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . .26
Playing Messages . . . . . . . . . . . . . . . . . . . . . . . .27
Playing New Messages Only . . . . . . . . . . . . . . . .27
Pausing Message Playback . . . . . . . . . . . . . . . . .28
Fast Message Playback . . . . . . . . . . . . . . . . . . . .29
Deleting Messages . . . . . . . . . . . . . . . . . . . . . . .29
Recording A Memo . . . . . . . . . . . . . . . . . . . . . .30
Using Call Breakthrough . . . . . . . . . . . . . . . . . .30
Changing the CBT Code . . . . . . . . . . . . . . . . . . .31
Remote Operation . . . . . . . . . . . . . . . . . . . . . . .33
Remote Answer-On . . . . . . . . . . . . . . . . . . . . . .33
Changing the Remote Operation Security Code . .34
Using Remote Commands . . . . . . . . . . . . . . . . .35
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .37
Resetting the DTAM . . . . . . . . . . . . . . . . . . . . . .38
Care and Maintenance . . . . . . . . . . . . . . . . . . .39
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SAFETY INFORMATION
FOR YOUR SAFETY, PLEASE OBSERVE THE FOLLOWING:-
• Never install telephone wiring during lightning storm.
• Do not use your DTAM unit near water or when wet.
• Do not take apart or remove the screws - there are no
serviceable parts inside.
• Make sure the line cord and AC Adaptor do not cause
a trip hazard.
READ THIS BEFORE INSTALLATION
Your DTAM conforms to Australian and New Zealand
Telecommunications Authority Standards and you can connect it
to most telephone lines. However, each device you connect to
the phone line draws power from the phone line. We refer to
this power draw as the device’s Ringer Equivalence Number, or
REN. This number is on the label on the bottom of the DTAM.
If you are using more than one phone or other device on the
line, add up all the RENs. If the total is more than three, your
phone(s) might not ring and your DTAM might not answer. If
ringer operation is impaired, remove a device from the line.
NOTE:
You must not connect the DTAM to any of the following:
•
•
•
Coin operated systems
Party-line systems
Most electronic key phone systems
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SAFETY INFORMATION
NOTE: NEW ZEALAND ONLY
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions
for connection to it’s network. It indicates no endorsement of the product
by Telecom, nor does it provide any sort of warranty. Above all, it provides
no assurance that any item will work correctly in all respects with with another
item of Telepermitted equipment of a different make or model, nor does it
imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another
device connected to the same line.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INTRODUCTION
Congratulations on the purchase of your 7000A Digital
Telephone Answering Machine, (DTAM).
This product has been designed especially for the Australian
and New Zealand market. It is guaranteed to provide you with
reliability, long life and outstanding performance.
Digital means all messages are stored on a computer chip - there
are no tape mechanisms to wear out and no tapes to bother
with. This gives you capabilities that tape-based answering
machines don’t have. For example, you can delete individual
messages, skip forward, backward or play only new messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PARTS CHECKLIST
If any of these items are missing or damaged, please contact the
place of purchase.
7000A DTAM
Telephone cord and
Splitter for New Zealand
Telephone cord and
Splitter for Australia
or
7000A
Digital Telephone Answering Machine
Operating Guide
for Australia and New Zealand
AC Adaptor
Operating
guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
FEATURES
YOUR DTAM’S FEATURES INCLUDE:-
Superb Digital Record Quality
This 7000A DTAM uses 4 times the memory and twice the sampling
rate of older style DTAMs for enhanced digital recording quality.
Fast Message Playback
Allows quick playback through old, long or complicated messages.
9 Minutes Digital Record Time
No tapes or moving parts to wear out.
Dual Outgoing Message
Lets you choose between playing an outgoing message then
recording the caller’s message, or just playing an announcement
without recording a message. And, when the DTAM’s memory is
full, it switches automatically to just playing an announcement.
Day & Time Stamp
Announces the time and day when each message was recorded.
Programmable Remote Operation Security Code
Lets you set a three digit personal remote operation security code
for secure remote operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
FEATURES
Call Screening
Lets you listen as a caller leaves a message so you can decide
whether or not to answer the call.
Call Break-Through (CBT) with Programmable Code
Alerts you to an important call when the caller enters a preset
code during the outgoing message.
Memory Backup
Protects messages stored in memory in case of a power failure.
Requires a 9 volt battery (not supplied).
Adjustable Ring Number
Lets you set the DTAM to answer the phone after two rings, four
rings or seven rings.
Toll Saver
Lets you avoid unnecessary long distance charges when you call
by long distance to check your messages.
Room Monitor
Lets you listen from a remote phone to the room where you
installed the DTAM.
answer Lets you turn the DTAM on or off.
Call/Message Counter
Shows the number of messages the DTAM has recorded.
delete Lets you quickly delete messages individually or all
at once.
Remote Access
Lets you turn the DTAM on or off and listen to messages when
you are away from your home or office.
Memo Recording
Lets you leave messages for yourself or others in your home
or office.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
FUNCTIONS
Outgoing Message 1
Used to record the OGM1 greeting and used to select
OGM1 as the greeting.
Outgoing Message 2
Used to record the OGM2 announcement and used to
select OGM2 as the greeting/announcement.
Message Light
The Red light above the answer button lets you know if you
have new messages and whether your DTAM is on or off.
Answer
Switches DTAM between answer on and answer off.
Delete
Used to delete one or all messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
FUNCTIONS
Play
Plays messages also pauses messages during playback.
Memo
Records a memo/message.
Repeat
Repeat the current message.
Code Set
Sets the call breakthrough code (CBT)
Skip
Skips to next message or if held down speeds up
during playback.
Time set
Sets the time/date.
Stop
Stops message playback.
LED Display
No messages stored in the machine
Number of messages stored eg: 7
Announcement 1 - Outgoing Message
Announcement 2 - Announce Only Message
Announce Only
Battery Low or not installed
Clock Set
Playback Paused
Messages Deleted
Memo Record
Set Call Breakthrough (CBT) Code
Set Security Code
Download from Www.Somanuals.com. All Manuals Search And Download.
14
INSTALLATION
SELECTING A LOCATION
Select a location that is near both a telephone socket and
an AC outlet.
CONNECTING THE DTAM TO THE TELEPHONE LINE
To connect the DTAM to the phone line, plug one end of the
supplied modular cord into the jack on the back of the DTAM
labelled “line”. Then plug the cord’s other end into a telephone
socket.
If you wish to connect both the DTAM and a telephone to
the telephone line, simply use the two way splitter supplied.
Plug the splitter into the telephone wall socket then plug
the DTAM into one side of the splitter and the phone into
the other side.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
INSTALLATION
CONNECTING POWER
Use only the Uniden AC Adaptor supplied with this
Uniden 7000A Digital Telephone Answering Machine.
1. Plug the AC Adaptor into the power socket at the rear of the DTAM
labelled “9 V AC 400mA”.
2. Then plug the other end into your mains socket.
When you first connect power, the DTAM beeps once and
announces "Please wait". The message counter counts up from 0
to 18. Then the DTAM beeps.
,
,
, and
alternatively
appear to indicate that no outgoing messages are recorded.
NOTE:
The display will flash
if there is no back up battery fitted or
if the back up battery is low.
BACKUP BATTERY
If the power fails or you unplug the DTAM, a 9V backup battery (not
supplied) would save the messages and the settings for the day, time
and security code. We recommend you use an alkaline battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
INSTALLATION
Disconnect the telephone line cord before replacing
the battery.
Always use a new 9V alkaline battery for optimum performance.
Follow these steps to install the backup battery.
1. Use a Phillips screwdriver to remove the screw on the
compartment cover.
2. Push down the latch to release the battery compartment cover.
3. Snap the battery’s contacts firmly to the battery connector, then
place the battery into the compartment.
4. Replace the cover and secure it with the screw.
Dispose of old battery promptly and properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
PREPARATION
SETTING THE DAY AND TIME
The DTAM records the day and time of the call with each phone message.
Follow these steps to set the current day and time.
NOTE:
•
•
•
Adjust Volume Slider on the right side of the DTAM to the
desired listening level.
If you do not complete each step within 8 seconds, the
DTAM sounds four beeps, you must then start again from Step 1.
To avoid having to reset the time if AC power is lost, we
recommend you install a backup battery before you set the
day and time.
1. Press and hold down time set
button until the DTAM announces
the day of the week.
Release the time set button.
2. Press
or
until
the DTAM announces the desired
day of the week.
3. Press time set The DTAM announces the preset hour.
4. Press
hour.
or
until the DTAM announces the desired
5. Press time set The DTAM announces the preset minute.
6. Hold down or until the DTAM announces the
desired minute.
7. Press time set to confirm the settings, appears.
The DTAM announces the day and time then beeps. disappears.
To check the current day/time at any time, press time set
Download from Www.Somanuals.com. All Manuals Search And Download.
19
PREPARATION
RECORDING THE OUTGOING MESSAGES
Before you can set the DTAM to answer calls and record
messages, you must record the outgoing message (OGM) the
caller hears when the DTAM answers a call. The DTAM lets you
record two separate messages and it operates differently based
on which message you select (see "Setting the DTAM to Answer
Calls" on Page 25).
• OGM 1 plays the message you recorded, and lets the
caller leave a message of up to 60 seconds.
• OGM 2 (announcement only) plays the message you
recorded, and hangs up without letting the caller leave a
message. This is useful for announcing information about
an upcoming event. Be sure the announcement clearly
states that the caller cannot leave a message. If the DTAM
memory becomes full, it will automatically switch from
OGM 1 to OGM 2 and play that message for any new calls.
NOTE:
The maximum length for OGM 1 and OGM 2 is 60 seconds.
The display counts the recording time.
Recording the Outgoing Messages
1. To record the OGM 1 message,
hold down OGM 1 until
the DTAM beeps and
(announcement 1) appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
PREPARATION
NOTE:
Do not tell the callers that you are not home. Instead, say that
you cannot come to the phone right now.
2. Speak in a normal voice about 20cm (8 inches) away from the
microphone (located on the front of the DTAM). If you record
the OGM 1 message, ask for the caller’s name, phone number
and message.
3. When you finish recording,
press
. The DTAM
automatically plays back
the outgoing message.
To record an OGM 2 message,
hold down OGM 2 until the
DTAM beeps and
(Announcement 2) appears.
Repeat steps 2 and 3.
NOTE:
•
•
If no outgoing OGM1 is recorded when you press OGM 1 , the
DTAM announces "You have no announcement one" and sounds
four beeps.
If no outgoing OGM2 is recorded when you press OGM 2 , the
DTAM announces "You have no announcement two" and sounds
four beeps.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
PREPARATION
To play back your outgoing OGM 1 message at any time,
press OGM 1 , appears, the DTAM beeps and the
outgoing message plays.
To play back your outgoing OGM 2 message at any time,
press OGM 2 ,
appears, the DTAM beeps and the
announcement only message plays.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
PREPARATION
SETTING THE NUMBER OF RINGS
The ring select switch on the back of the DTAM controls how
long the DTAM waits before it answers a call. Slide the switch
to the desired position.
2 The DTAM answers after two rings.
4 The DTAM answers after four rings.
7 The DTAM answers after seven rings.
T.S. (Toll Saver) - If there are new messages, the DTAM
answers after two rings. Otherwise, the DTAM answers after
four rings. This helps you avoid unnecessary toll charges when
calling by long distance to check your messages. If you hear
more than two rings, you know you can hang up because the
DTAM has no new messages.
NOTE:
•
When the memory is full the DTAM answers the call and
plays OGM2 (the announce only message).
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
24
BASIC OPERATION
SETTING THE DTAM TO ANSWER CALLS
To Turn The DTAM On
To turn on the DTAM and set it to answer calls and record messages,
press answer once. The DTAM announces "Answer-on", beeps
once and plays the outgoing message. The red “Answer-on”
indicator lights up. The DTAM is now set to answer calls using
the OGM 1 message and record callers’ messages.
To Announce Only
To set the DTAM to answer calls but not record messages, press
OGM 2 when the DTAM is set to “Answer-on" mode. The DTAM
announces "Announce only", beeps and plays your announcement,
then displays
(Announce only). The DTAM is now set to
answer calls using the OGM 2 message without recording callers’
messages. To swap between recording messages (OGM 1) or
announce only (OGM 2 ) simply press OGM 1 or OGM 2 as
required.
To Turn The DTAM Off
To turn off the DTAM so it does not answer calls, press answer
again. The DTAM announces “Answer off”, beeps and the red
“Answer-on” indicator turns off.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
BASIC OPERATION
RECORDING INCOMING MESSAGES
The maximum incoming message recording length is 60 seconds.
When a recording reaches 55 seconds, the DTAM beeps once to
notify the caller that time will soon be up. When the recording
reaches 60 seconds, the DTAM sounds one long and four short
beeps, and plays "Thank you for your call", then hangs up.
The DTAM hangs up and resets to answer the next call when:
• The caller hangs up.
• The maximum message length (60 seconds) is reached.
• There are more than 8 seconds of silence.
If the DTAM’s memory is full (
appears), it will answer
the call after 3 rings then play the announcement only
message (OGM2).
If no OGM2 is recorded, the DTAM announces "Memory is full,
thank you for your call". Please delete some messages to
restore normal operation.
SCREENING CALLS
To screen calls, let the DTAM answer them, then listen to the
caller’s message through the DTAM’ speaker. If you decide to
answer the call, pick up the phone and press
on the DTAM.
If you do not want to take the call, do not pick up the phone,
and let the DTAM finish recording the caller’s message.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
BASIC OPERATION
ADJUSTING THE VOLUME
Adjust volume slider, on the right side of the DTAM to the
desired listening level.
PLAYING MESSAGES
The display shows the total number of messages. If there are
new messages, the message light also flashes until all new
messages have been played.
To play all the messages (old and new), press
. The DTAM
announces the number of messages recorded, each
message number and the day and time the message was
recorded and then plays the message.
PLAYING NEW MESSAGES ONLY
To play only new messages, hold
down
for 2 seconds.
(If there are no new messages
stored, the DTAM says "You
have no new messages").
Adjust the volume to your desired listening level. After all
messages have played, the DTAM says, "End of message(s)"
and saves all the messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
BASIC OPERATION
To replay a message while you are listening to it, press
The current message starts again from the beginning.
.
To return to the previous message during playback, press and hold
down The previous recorded message plays.
To skip to the next message during playback, press
The next recorded message plays.
once.
PAUSE MESSAGE PLAYBACK
To pause while listening to messages, press
appears on the display. To resume playback, press
(pause)
again
within 60 seconds. Otherwise, the DTAM beeps once, stops
playback, announces "End of message(s)" and displays the total
number of messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
BASIC OPERATION
FAST PLAYBACK
During message playback, press and keep holding
, the
message playback speed increases. This lets you quickly scan a
message or move to any place within a message. To resume to
normal playback, release
.
To stop playback at any time, press the
.
The DTAM beeps and resets to answer calls.
DELETING MESSAGES
To delete a specific message, press delete once while the
message is playing. The DTAM beeps once and deletes the
current message, then plays the next.
To delete all messages, hold down delete when playback has
finished.
appears, the DTAM announces "Erase
message(s)", then sounds a long beep.
NOTE:
The DTAM does not delete messages that have not been played to the
end. If you have messages that have not been played, the DTAM
sounds four beeps.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
BASIC OPERATION
RECORDING A MEMO
A memo is a message you can record by speaking directly into the
DTAM, without having to call in on the phone.
Follow these steps to record a memo up to 60 seconds long.
1. Press memo until
appears.
The DTAM sounds a long beep and
appears. Speak into the
microphone in a normal voice.
The display counts up the
recording time.
2. The DTAM automatically stops recording after 60 seconds or
you can press
button when you finish the memo.
The DTAM beeps once, and the message number indicator
increases by one.
The memo is stored along with the incoming messages. To hear
the memo, simply play back your messages.
USING CALL BREAKTHROUGH
If you screen your calls but want to be sure to know when calls come
in from certain people, give those people your call breakthrough
(CBT) code. Tell them to enter the code during the outgoing message.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
BASIC OPERATION
When a caller enters the CBT code, the DTAM alerts you with loud
beeps for 35 seconds. Then the DTAM sounds two beeps every two
seconds for 30 seconds, and one short beep every second for the
last 5 seconds. To answer the call, pick up the handset. If you
do not answer, the caller can leave a message after the outgoing
message plays and a long beep sounds.
CHANGING THE CBT CODE
The CBT code is preset to 648, but you can change it by following
these steps:
1. Hold down code set until the DTAM beeps once appears.
NOTE:
Be sure to set each digit within 8 seconds. Otherwise, you must start
over from Step 1.
2. Press
The DTAM beeps and
appears followed by the
digits of the preset CBT code in sequence, then the first digit
reappears. For example, when the security code is 648, the
display shows
,
,
, then
reappears.
3. Repeatedly press
or
to set the first digit, then
press
. The second digit appears.
4. Press
or to set the second digit, then press
The third digit appears.
5. Press or to set the third digit, then press
The DTAM sounds a long beep and announces the CBT code.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
This page is left intentionally blank
Download from Www.Somanuals.com. All Manuals Search And Download.
32
REMOTE OPERATION
REMOTE OPERATION
You can operate the DTAM from any remote location using a
touch-tone phone, or from a rotary phone using a pocket tone-
dialler.
Call your telephone
When you hear the OGM, enter your security code. After a long
beep, enter your remote command code(s).
If you do not hear an OGM, the unit is either in Answer-off mode
or is not setup properly.
Remote Answer-on
•
Call your telephone (After 15 rings you will hear
"Answer Off")
•
Enter your remote security code within 8 seconds.
(The DTAM beeps to confirm valid code)
Enter 0 1 for OGM1 or 0 2 for OGM2 (Announce only)
The DTAM announces "Answer On’,
•
•
Then plays your selected OGM.
NOTE: • An outgoing message must be recorded before you can remotely
set the DTAM to answer calls.
• If you do not enter each digit of the security code within 8 seconds,
the DTAM hangs up. If the DTAM is set to answer-on, it answers
according to the number of rings you set. The DTAM plays OGM1.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
REMOTE OPERATION
CHANGING THE REMOTE OPERATION SECURITY CODE
The remote operation security code is preset to 798, but you can
change it by following these steps.
1. Hold down code set until the DTAM beeps once.
appears.
2. Press again. (security code) and the digits of the
current code appear in sequence, then the first digit reappears.
For example, when the security code is 798, the display shows
(security code)
,
,
, then
reappears.
3. Repeatedly press
or
to set the first digit, then
press
. The second digit appears.
4. Press
or to set the second digit, then press
The third digit appears.
5. Press or
to set the third digit, then press
The DTAM sounds a long beep and announces the
security code.
NOTE:
Be sure to set each digit within 8 seconds. Otherwise, you must start
over from Step 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
REMOTE OPERATION
USING REMOTE COMMANDS
To use the remote commands, you must enter the remote oper-
ation security code within 8 seconds after the DTAM answers
the call. After the DTAM beeps once to verify you entered the
code correctly, enter the number(s) for the function(s) you
want the DTAM to perform.
Press
00
To
Turn the DTAM off. The DTAM beeps and announces "Answer Off".
01
Turn the DTAM on. The DTAM beeps and announces "Answer on"
then plays OGM1. If no OGM1 is recorded, the DTAM beeps
and announces "You have no announcement one".
02
Set the DTAM to answer with OGM2 announcement. The DTAM
beeps and announces "Announce only", then plays OGM2. If no
OGM2 is recorded, the DTAM beeps and announces "You have no
announcement two".
2
3
Play all messages. If no message is recorded, the DTAM says
"You have no messages".
Play new messages. When new messages are recorded, the DTAM
announces the number of new messages before playback. If no
new message is recorded, the DTAM says, "You have no new
messages".
4
Monitor the room where the DTAM is installed. The room is
monitored for 20 seconds. Press 4 again for another 20 seconds.
You can repeat this for as long as you like.
51
Delete all messages (except new messages). Press 1 after the DTAM
announce "Erase messages", then the DTAM beeps.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
REMOTE OPERATION
6
Stop playback and message recording.
7
Record a memo.
81
Change OGM1. After the DTAM beeps, begin your new OGM1.
When you finish, press 6. The DTAM beeps and replays.
82
91
92
Play OGM1. If no OGM1 is recorded, the DTAM announces "You
have no announcement one".
Change OGM2. After the DTAM beeps, begin your new OGM2.
When you finish, press 6. The DTAM beeps and replays.
Play OGM2. If no OGM2 is recorded, the DTAM announces "You
have no announcement two".
After you press 2 or 3 to play messages:
Press
To
1
3
4
5
6
Replay the previous message
Skip to the next message
Replay the current message
Delete the current message
Stop message playback
Download from Www.Somanuals.com. All Manuals Search And Download.
36
TROUBLESHOOTING
If your 7000A DTAM unit is not performing to your expectations, please try these
simple steps. If you are still unable to resolve the problems, contact Uniden
Customer Service for assistance.
New Zealand: 0800 4 UNIDEN
4 864336
Australia: 1800 632 789
PROBLEM
Answering system does not work
SUGGESTION
• Make sure the telephone line cord
is plugged in.
• Make sure that the AC Adaptor
is plugged in.
• Make sure the DTAM is turned on.
• There has been a power failure.
Disconnect the telephone line cord,
press the reset button and re-connect
the telephone line cord.
Answering System does not answers
after 3 rings.
• The memory may be full. Delete some
or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long.
• The memory may be full. Delete some
or all of the saved messages.
No sound on the base unit speaker during • Adjust the volume control on the side of
call monitoring or message playback. the DTAM. Refer page 27
Cannot record outgoing message (OGM) • The memory may be full. Delete some or
all of the saved messages.
Continued over....
Download from Www.Somanuals.com. All Manuals Search And Download.
37
TROUBLESHOOTING
PROBLEM
SUGGESTION
Cannot access remote call-in features from • Make sure you’re using the correct PIN
another touch-tone phone.
number.
• Make sure that the touch-tone phone
you’re using can transmit the tone for at
least two seconds. If it cannot, you may
have to change to another phone.
Clock loses time.
• The power to the base unit has been
interrupted. Reset the clock as detailed
on page (19) of this owners manual.
Message counter LED flashes
(Battery low or not fitted)
• Follow the instructions on page (16).
Be sure to leave the AC Adaptor connected
so you do not loose the stored information.
Answering system switches on after 9 rings, • The unit is waiting for your PIN number so
beeps once, then disconnects after 8 seconds you can clear message from a remote
location. Refer to page 33 for more details.
RESETTING THE DTAM
If all of the above suggestions do not resolve
your problem, use a straightened paper
clip to press RESET on the back of
the DTAM to reset the answering
machine.
NOTE:
Resetting the DTAM erases your outgoing messages and all stored
information.
Disconnect the telephone line cord before operating the
RESET switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
CARE AND MAINTENANCE
1.
2.
Unplug the unit before cleaning it.
Clean your unit with a damp(never wet) cloth.
Solvent or detergent should never be used as they
may damage the finish of the plastic casing.
3.
4.
Make sure there is space above and to the rear of your
unit to allow for proper ventilation.
Make sure you check your 9V DC battery at regular
intervals for leakage. Replace when necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
40
WARRANTY
Uniden 7000A 1 YEAR WARRANTY
(Batteries and Accessories are covered for 90 Days ONLY)
Note: Please keep your sales docket as it provides evidence of warranty. Warranty is only valid in the
country where the product has been purchased.
WARRANTOR:
Uniden Australian Pty Ltd. ACN 001 865 498
Uniden New Zealand Limited
ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this
warranty, its product to be free from defects in materials and craftsmanship with only the limitations
or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall terminate and of no
further effect ONE (1) Year after the date of original retail sale. This warranty will be deemed invalid
if the product is: (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered
or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C)
Improperly installed, (D) Repaired by someone other than an authorised Uniden Repair Agent for a
defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts
or as a part of a system not manufactured by Uniden, (F) Installed, or serviced by anyone other than
an authorised Uniden Repair Agent, (G) Where the Serial Number label of the product has been
removed or damaged beyond recognition.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time
while this warranty is in effect, the warrantor at its discretion, will repair the defect or replace the
product and return it to you without charge for parts and service. THIS WARRANTY DOES NOT COVER
OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS
UNDER THE CONSUMER GUARANTEE ACT.
WARRANTY CARD: If a warranty card has been included with this product then please fill it in and
return to us within 14 days of purchase. Your name and the Serial number of the product will then be
registered in our database and this will help us process your claim with greater speed and efficiency
should you require warranty service.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:
In the event that the product does not conform to this warranty, the Product should be shipped or
delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of the sales docket), with a
full description of the problem, to the warrantor at:-
UNIDEN AUSTRALIA PTY. LIMITED
SERVICE DIVISION
345 Princes Highway, Rockdale, NSW 2216
Ph: (02) 9599 3577 Fax: (02) 9599 3278
Free Call: 1800 632 789
UNIDEN NEW ZEALAND LIMITED
150 Harris Road, East Tamaki, Auckland.
Ph: (09) 273 8383
Fax: (09) 274 0009
Toll Free: 0800 4 UNIDEN
0800 4 864336
Customers in other States should ship or deliver the Product freight pre-paid to their nearest Uniden
Authorised Repair Centre. (Contact Uniden for the nearest Warranty Agent to you).
NOTE: Keep your receipt of purchase in a safe place in case you
ever need warranty service. You should also save the carton
and packaging material for storage or shipping purposes.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
A Clear Signal of What’s Ahead.
© 1999 UNIDEN CORPORATION. ALL RIGHTS RESERVED.
Download from Www.Somanuals.com. All Manuals Search And Download.
|