Tyan Computer Computer Hardware S2460 User Manual

TM  
Tiger MP  
S2460  
User’s Manual  
Revision 1.03  
Copyright © Tyan Computer Corporation, 2001. All rights reserved. No part of this manual may be repro-  
duced or translated without prior written consent from Tyan Computer Corp.  
All registered and unregistered trademarks and company names contained in this manual are property of  
their respective owners including, but not limited to the following.  
Tyan, Tiger MP S2460 are trademarks of Tyan Computer Corporation.  
AMD, AMD Athlon, AMD-760, AMD-762, and AMD-766 and combinations thereof are trademarks of  
Advanced Micro Devices, Inc.  
Phoenix, Phoenix BIOS are trademarks of Phoenix Software.  
Microsoft, Windows are trademarks of Microsoft Corporation.  
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.  
Winbond is a trademark of Winbond Electronics Corporation.  
Micronics is a trademark of Micronics Corporation.  
Portable Document Format (PDF) is a trademark of Adobe Corporation.  
Iomega, Zip are registered trademarks of Iomega Corporation.  
Information contained in this document is furnished by Tyan Computer Corporation and has been  
reviewed for accuracy and reliability prior to printing. Tyan assumes no liability whatsoever, and disclaims  
any express or implied warranty, relating to sale and/or use of Tyan products including liability or warran-  
ties relating to fitness for a particular purpose or merchantability. Tyan retains the right to make changes  
to product descriptions and/or specifications at any time, without notice. In no event will Tyan be held lia-  
ble for any direct or indirect, incidental or consequential damage, loss of use, loss of data or other malady  
resulting from errors or inaccuracies of information contained in this document.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1  
Main Setup ...............................................................................................................33  
3.1-A Master and Slave Screens .......................................................................................34  
3.2  
Advanced Setup .......................................................................................................36  
3.2-A  
Chipset Configuration Screen ..................................................................................38  
3.2-B Keyboard Configuration Screen ...............................................................................39  
3.2-C I/O Configuration Screen ..........................................................................................39  
3.2-D  
PCI Configuration Screen ........................................................................................40  
3.2-E PCI/PnP IRQ Exclusion screen ................................................................................40  
3.2-F  
PCI/PnP UMB Exclusion screen ..............................................................................40  
3.3  
3.4  
3.5  
3.6  
Security Setup ..........................................................................................................41  
Power Setup ............................................................................................................41  
Boot Setup ...............................................................................................................43  
Exit Menu .................................................................................................................43  
....................................................... 44  
Chapter 4: System Resources  
4.1  
4.2  
Beep Codes .............................................................................................................44  
Flash Utility ..............................................................................................................44  
....................................................................... 45  
Appendix I: Glossary  
Technical Support ....................................................................................................51  
Returning Merchandise for Service ..........................................................................51  
Tiger MP S2460  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you begin...  
Check the box contents!  
The retail motherboard package should contain the following:  
Tiger MP motherboard  
34-pin floppy cable  
UltraDMA-100/66/33 IDE cable  
Tiger MP user’s manual  
Tyan driver CD  
If any of these items are missing, please contact your vendor/dealer for replacements before continuing  
with the installation process.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Introduction  
1.1 Congratulations!  
You are now the owner of the world’s first dual AMD processor platform!  
- CONSUMER EDITION!  
The Tyan Tiger MP™ is a direct descendent of the Thunder K7, the most critically acclaimed and deco-  
rated system board in the history of Tyan. Aimed directly at the power-user and enthusiast market, the  
Tiger MP is a high performance workstation platform designed for development and performance applica-  
tions that require the power of dual AMD Athlon™ MP processors. This platform utilizes the AMD-760™  
MP chipset and can support CPU speeds greater than 1.0+GHz and front side bus speeds of 200 MHz or  
266 MHz. Please see Tyan’s website for updates and information concerning CPU information and sup-  
port:  
This integrated performance board is supported in an ATX form factor. Features of the Tiger MP include  
onboard UltraDMA-100/66/33, and multiple boot options.  
With both I/O and drive controller support onboard, the one 2x/4x mode AGP slot, four 64/32-bit 33MHz  
PCI slots, and two 32-bit 33MHz PCI slots are free for numerous types of add-on expansion cards. The  
four 184-pin DDR DIMM sockets can support up to 3GB of PC1600/2100 registered DDR SDRAM.  
Remember to visit Tyan’s website at http://www.tyan.com. There you can find information on all of  
Tyan’s products with FAQs, distributors list, and BIOS settings explanations.  
NOTE: See PAGE 28 for recommendations and details of power supply information and installa-  
tion.  
* Indicates an optional feature, may not be available on most Tiger MP models  
Tiger MP S2460  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Tiger MP System Block Diagram  
S2K 200/  
266MHz bus  
S2K 200/  
266MHz bus  
AMD Athlon MP  
Processor 0  
Socket 462  
AMD Athlon MP  
Processor 1  
Socket 462  
Dual-channel  
200/266MHz  
DDR SDRAM  
bus  
64-bit /  
33MHz  
PCI bus  
AMD-762  
System  
Controller  
AGP 4x  
bus  
184-pin Registered  
DDR DIMMs  
PCI slots  
#1 - 5  
AGP slot  
64-bit / 33MHz  
PCI bus  
AMD-766  
Peripheral  
Bus  
SMBus  
Winbond 83782D H/W  
Controller  
LPC bus  
Winbond  
W83627HF  
Floppy Device  
Hardware Monitoring  
Serial  
Ports  
LPT  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Hardware Specifications  
Processor Information  
Dual PGA462 ZIF sockets  
Supports dual AMD Athlon MP processors  
Two onboard VRMs  
200MHz and 266MHz system bus support  
Expansion Slots  
One AGP slot supports 2x/4x modes  
Four 64/32-bit 33MHz 5V PCI v2.2 slots  
Two 32-bit 33MHz 5V PCI v2.2 slots  
Total of seven usable slots  
Chipset Information  
AMD-760 MP chipset  
AMD-762 System Controller  
AMD-766 Peripheral Bus Controller  
Winbond W83627HF Super I/O ASIC  
Hardware Monitoring  
(manufacturing option)  
Winbond W83782D hardware monitoring  
3-pin fan monitoring headers  
2-pin chassis intrusion header***  
CPU temperature and voltage monitoring***  
Memory*  
Four 2.5V 184-pin DDR DIMM sockets  
Supports up to 3.0GB* PC1600/2100 registered DDR  
Supports ECC (72-bit) memory modules  
One floppy connector supports up to two drives  
Two 9-pin 16550-based serial ports  
One 25-pin SPP/ECP/EPP parallel port  
Four USB ports (two front panel via optional cable**,  
USB v1.1)  
Integrated I/O  
PS/2 keyboard and mouse ports  
Dual-channel master mode  
Integrated PCI IDE  
Up to four Enhanced IDE devices  
Support for UltraDMA-100/66/33 IDE and ATAPI com-  
pliant devices  
Phoenix BIOS 4 Mb Flash  
BIOS  
Supports APM 1.2 & ACPI 1.0  
Auto-configuration of IDE hard disk types  
User settings of hardware monitoring***  
Multiple boot options  
DMI 2.0 compliant  
*
Please check Tyan website for memory compatibility information: http://www.tyan.com  
** Only certain chassis allow for frontside USB connection. Please check with your chassis vendor for  
details on frontside USB connections. Tyan does not provide frontside USB cables.  
*** Indicates an optional feature, may not be available on most Tiger MP models  
Tiger MP S2460  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATX 12” x 10.3” (304.80mm x 261.62mm)  
One 20-pin power connector (requires 30A on +5V line)  
Stacked mouse & keyboard ports  
Stacked two USB ports  
Stacked one parallel, two serial ports  
Form Factor  
Regulatory  
FCC Class B (Declaration of Conformity)  
European Community CE (Declaration of Conformity)  
1.4 Software Specifications  
Windows NT/2000  
OS  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Board Installation  
2.1 Installation  
Once you’ve checked that everything is inside the box (see p. 4 for details), you will then be ready to  
install your motherboard. The mounting hole pattern of the motherboard matches the ATX board specifi-  
cations, so your chassis must be capable of supporting an Extended ATX board (check the motherboard  
dimensions provided on p. 8).  
2.2 How to install our products right.. the first time.  
Question: what’s the first thing I should do?  
The first thing you should do is read the user’s manual. It contains important information which will make  
configuration and setup much easier, as well as provide information on device installation and component  
setup. By reading through the manual completely before installing your motherboard, you will have a  
complete overview on the installation.  
2.3 Here are some safety tips:  
(1) Ground yourself properly before removing your motherboard from the antistatic bag. Unplug  
the power from your computer power supply and touch any metal part on the computer case. (You  
might also want to wear a grounded wrist strap.)  
(2) Hold the motherboard by its edges and do not touch the bottom of the board.  
(3) Avoid touching motherboard components, IC chips, connectors, and leads.  
(4) Avoid touching pins of memory modules and chips.  
(5) Place motherboard on a grounded antistatic surface or on the antistatic bag.  
Having reviewed the precautions above, the next step is to take the motherboard out of the cardboard box  
and static bag, hold it by its edges, and place it on a grounded antistatic surface (such as the bag it came  
in), component side up. Then, inspect the board for damage.  
NOTE:  
DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED!  
Press down on any of the socketed ICs if it appears that they are not properly seated (the board should  
still be on an antistatic mat or on top of the bag it came in). Do not touch the bottom of the board. Remem-  
ber, don’t take any electronic device out of its protective bag until you are ready to actually start installing  
it into the computer case (e.g. setting jumpers, etc.) If you do not ground yourself, you risk “zapping” the  
motherboard or adapter card. Subsequent problems may not arise immediately because electrostatic dis-  
charge, unlike physical damage, causes the device to fail over time.  
Tiger MP S2460  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.4 Quick References for Jumpers  
In this manual, the term “closed” and “on” are used when referring to jumpers (or jumper pins) that are  
active; “open” and “off” are used when referring to jumpers (or jumper pins) that are inactive. See Figure  
2.0a and Figure 2.0c for examples of “on” and “off” pins and jumpers.  
Jumpers and pins are connected by slipping the plastic jumper connector over the top of two adjacent  
jumper pins (indicated by 1-2 or 2-3). The metal rod inside the plastic shell bridges the gap between the  
two pins, completing the circuit. See Figure 2.0b and Figure 2.0d for more examples of 3-pin jumper  
connections. NOTE: The small number “1” indicates pin 1.  
The tables and maps on the following pages will help you set the jumpers for CPU speed, infrared, and  
external connector pin assignments, among others. The miniature motherboard maps will help you locate  
the jumpers on your board. Full page maps of the motherboard can be found on the next two pages.  
2-pin jumpers  
off on  
3-pin jumpers  
2-3  
1-2  
open  
1
2
3
1
2
3
1
2
3
Figure 2.0a  
Figure 2.0b  
(overhead view)  
(overhead view)  
2-pin jumpers  
3-pin jumpers  
2-3  
off  
on  
1-2  
open  
1
1
Figure 2.0c  
Figure 2.0d  
(front angle view)  
(front angle view)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.5 Map of Motherboard Jumpers  
(4) DDR DIMM  
sockets  
Mouse port Keyboard port  
(upper port)  
(lower port)  
1
2
3
4
P0FAN  
20-pin power  
connector  
FAN3  
P1FAN  
CPU0  
AMD-760  
MP  
CPU1  
AGP Slot  
J89  
1
2
3
4
J52  
J53  
J15  
J90  
J34  
BIOS  
5
6
Primary IDE  
Secondary IDE  
FDD  
Battery  
J48  
J49  
J12  
J21  
* Indicates an optional feature, may not be available on most Tiger MP models  
Tiger MP S2460  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6 Setting up Jumpers and Onboard Connectors  
Pinouts for certain connectors are available on the Tyan website: http://www.tyan.com  
2.6-A. Front Panel Connector (J12)  
SLP  
SW  
PWR  
SW  
RST  
SW  
25 23 21 19 17 15 13 11 9  
26 24 22 20 18 16 14 12 10 8  
7
5
6
3
4
1
2
KEY PWR  
SPEAKER  
LK  
LED  
Abbreviations  
Your chassis will usually come with connectors to install onto  
the motherboard, such as HDD and Power LEDs. The Front  
Panel Connector has been implemented for such purposes.  
RST  
Reset  
Power  
Sleep  
PWR  
SLP  
2.6-B. CMOS Reset (J21)  
1-2  
normal  
2-3  
clear  
J21  
* default is 1-2  
If you have been locked out of your system because you forgot your password or set the CMOS incor-  
rectly, or have just finished flashing your BIOS follow the instructions below.  
1. Power off the system, and disconnect the power supply  
2. Close pins 2-3 on J21  
3. Wait about three seconds  
4. Close pins 1-2 on J21, then power on the system again  
By following this procedure, you will erase your password and reset the CMOS.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6-C. CPU Front Side Bus Jumpers (J48, J49; J52, J53) (READ NOTE BELOW)  
With these jumpers, the CPU FSB can be set to either 200 or 266MHz.  
YOU MUST SET THESE JUMPERS FOR PROPER CPU OPERATION. If your  
CPU can only run at 200MHz, altering these FSB jumpers will not make the  
CPU run at 266MHz.  
NOTE:  
Tyan takes no reponsibility and will not be held liable for damage related to opera-  
tion of the CPU using different settings from those of the CPU manufacturer’s  
specified default settings.  
You MUST set ALL FOUR JUMPERS to the  
same speed. Damage may result otherwise!  
NOTE:  
266MHz 200MHz  
2-3  
2-3  
1-2  
2-3  
J52  
J53  
1-2  
1-2  
2-3  
2-3  
J48  
J49  
2.6-D. Front-side USB Header* (J36)  
This header allows for a USB connection*. The USB channel on this header is on a separate channel  
from the rear USB connections channel. USB v1.1 is supported on this board.  
USB Header (J36)  
+VCC  
signal out  
signal in  
ground  
1
3
5
7
2
4
6
8
ground  
ground  
signal in  
signal out  
ground 9 10 +VCC  
* Only certain chassis allow for frontside USB connection. Please check with your chassis vendor for  
details on frontside USB connections. Tyan does not provide frontside USB cables.  
Tiger MP S2460  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6-E. FAN Headers (P0FAN, P1FAN, FAN1, FAN2, FAN3)  
These headers allow for extra fans to be installed. P0FAN and P1FAN are reserved for CPU0 and CPU1  
(respectively). All other fans are left to the user’s discretion.  
P0FAN  
FAN3  
P1FAN  
FAN1  
FAN2  
FAN  
2
Specifications  
1
3
Voltage  
12V  
ground  
+12V  
speed  
Amperage 300mA  
The FAN connector has a 12V, 300mA limitation. Tyan takes no responsibility  
and will not be held liable for damage related to the misuse of any FAN header.  
NOTE:  
2.6-F. Chassis Intrusion* Header (J90) (RESERVED)  
This header is provided in the event that your chassis has a chassis intrusion feature*, and that an appli-  
cation is available to manage this feature.  
J90  
* Indicates an optional feature, may not be available on some Tiger MP models  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6-G. SMBus Connector* (J89)  
This is a reserved feature for specific functions not usually required for normal board operation.  
J59  
2.6-H. Reserved Jumper* (J34) (RESERVED)  
This is a reserved feature* for debugging purposes only. DO NOT ADJUST OR TAMPER WITH THIS!  
J34  
* Indicates an optional feature, may not be available on most Tiger MP models  
Tiger MP S2460  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6-I. Soft Power Connector  
The soft power connector is part of jumper block J12 (pins 13 and 15). This board uses the chipset for  
power management, including turning on and off the system. If the power button function option in the  
BIOS Power Management menu is set to “On/Off” (which is the default), pressing the power button once  
after the BIOS has booted up will turn the system on and off. If the power button function is set to Sus-  
pend, pressing the power button once will wake up the system or send it to Suspend mode. In this case,  
you cannot turn the system off unless you shut down through the Windows operating system or you hold  
the power button down for four seconds (BIOS-dependent feature).  
SLP  
SW  
PWR  
SW  
RST  
SW  
25 23 21 19 17 15 13 11 9  
26 24 22 20 18 16 14 12 10 8  
7
5
6
3
4
1
2
PWR  
LED  
Abbreviations  
RST  
PWR  
SLP  
Reset  
Power  
Sleep  
2.6-J. Hardware Reset Switch Connector Installation  
The reset switch on your chassis case provides you with the Hardware Reset function, which is the same  
as power on/off, except that the system will immediately execute a cold start after the reset button is  
pushed. The reset switch needs to be connected to jumper block J12 (pins 7 and 9).  
PWR  
SW  
RST  
SW  
25 23 21 19 17 15 13 11 9  
26 24 22 20 18 16 14 12 10 8  
7
5
6
3
4
1
2
Abbreviations  
PWR  
RST  
Power  
Reset  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.6-K. Flash Utility  
You can upgrade the BIOS of this motherboard by using the Flash Utility (see p. 44). Check the Tyan  
website for more details: http://www.tyan.com  
BIOS  
Tiger MP S2460  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.7 Mounting the Motherboard into the Chassis  
Your chassis may include mounting hardware. If mounting hardware was included, you can use the fol-  
lowing examples to help you in installing your motherboard into the chassis.  
If your chassis has the studs integrated into the chassis wall, then you would only need to use screws  
(possibly included with your chassis) to install the motherboard. See the examples (Figure 2.0, shown  
below) for more details.  
If the chassis includes mounting hardware without the studs pre-installed, then you will need to install the  
motherboard using the mounting hardware as shown in the examples below. Remember not to over-  
tighten any of the screws, or you might risk breaking internal traces in the surrounding area, or damage  
the motherboard in some other way.  
Other examples of how to install your motherboard using other hardware (that may or may not have been  
included with your chassis) are shown below.  
Type of hardware One solution for installing motherboard Another solution Another solution  
screw  
motherboard  
base  
stud  
chassis wall  
motherboard  
base  
standoff  
chassis wall  
motherboard  
base  
standoff  
chassis wall  
Figure 2.0  
The diagrams above are only representative of a few solutions for installing a  
NOTE:  
motherboard into the chassis. The installation procedure for installing your moth-  
erboard into the chassis may differ.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.8 Installing Memory  
Please keep in mind that although some memory modules may appear to be high-quality, they may con-  
tain inferior or substandard parts. The type of memory you choose to install should be checked against  
the memory compatibility list, which is available from Tyan’s website at http://www.tyan.com  
Here are some details of memory installation for this board:  
At least one REGISTERED DDR DIMM* must be installed for the system to POST.  
Supports 128MB, 256MB, 512MB**, & 1024MB** PC1600/2100 REGISTERED DDR ONLY*.  
All installed memory will be automatically detected, so there is no need to set any jumpers.  
The motherboard supports up to 3.0GB** of PC1600/2100 REGISTERED DDR memory ONLY*.  
Memory Installation Procedure***  
Line your module up so that the pins fit into the socket. There is only one way your DIMM can  
Step  
1
fit properly. Make sure that the short row of pins is lined up with the short gap in the DIMM  
socket, just as the long row of pins should line up with the long gap in the DIMM socket.  
short row of pins  
long row of pins  
Insert the DIMM by pushing the module into the socket with even force. Do not insert one  
end and then the other: install the whole module at once or you might bend the DIMM pins.  
Make sure the DIMM is securely seated.  
Step  
2
* This board supports DDR memory ONLY. Please check that you are using the correct type of memory.  
** Not validated at time of print, please check Tyan website for memory compatibility information:  
*** Manufacturer suggestion: start installation with DIMM (bank) 1 (see p.21)  
Tiger MP S2460  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock the DIMM into place by pushing the clips back on either end of the socket onto the  
notches in the ends of the DIMM (see pictures below for details).  
Step  
3
1
2
Removing a DIMM  
Removing a DIMM is just the reverse: pull back the clips from the DIMM (see pictures below), and care-  
fully pull the module straight out. Place the DIMMs in an anti-static bag as soon as you remove them to  
avoid static damage.  
1
2
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Suggested Memory Configurations  
The table below shows some of the possible memory configurations. Not all possible configurations  
are listed. Your memory configuration may differ from one or more of the combinations** shown below.  
CPU 0  
CPU 1  
Total possible memory is 3.0GB* PC1600/2100 registered DDR SDRAM  
128MB  
128MB  
0
128MB  
128MB  
0
256MB  
0
256MB  
256MB  
256MB  
256MB  
512MB  
512MB  
0
1024MB 1024MB  
1024MB 1024MB  
0
0
0
0
256MB  
0
512MB  
512MB  
1024MB  
512MB  
64MB  
192MB  
0
1024MB  
128MB  
256MB  
512MB  
1024MB 2048MB* 3072MB* 3584MB*  
* Not validated at time of print, please check Tyan website for memory compatibility information:  
** Manufacturer suggestion: start installation with DIMM (bank) 1 (see above)  
Tiger MP S2460  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.9 Installing the CPU and Cooling Fan  
AMD Athlon MP processors up to 1.4GHz can be used on this board. For more information on CPU com-  
patibility, check Tyan’s website at: http://www.tyan.com.  
When installing your CPU, remember the following:  
The CPU is a sensitive electronic component and can easily be damaged by static electricity  
Do not touch the CPU pins with your fingers  
You should be able to insert the CPU into the socket with virtually no force  
Do not press down hard on the CPU as you might bend or break pins, or otherwise damage the  
CPU  
The CPU voltage will automatically be detected by the motherboard, so there is no need to set  
any jumpers or BIOS setting.  
Installing the CPU  
Before installing the CPU, check it for any visible damage. Make sure none of the pins are bent or miss-  
ing. Be sure where Pin 1 is on both the CPU and the socket. The following steps each have a correspond-  
ing picture next to it to help guide you through the installation.  
Carefully lift the arm of the ZIF socket until it is at a 90 degree angle  
Step  
1
2
1
2
3
pointing away from the motherboard. Be very careful not to damage  
any components that might be next to the socket.  
There are two beveled corners on the CPU, which will match the  
two angled corners on the socket. Carefully install the CPU by lining  
both Pin 1 on the CPU and Pin 1 on the socket, making sure the  
pins actually fit into the socket. Do not force the CPU into the  
socket: check the pin alignment of CPU pins to socket holes.  
Pin 1  
Step  
Push down lightly on the CPU while lowering the arm on the socket  
to secure the CPU (see right). A squeaking noise may be heard  
while lowering the arm, or the socket may make a ‘click’ noise when  
the arm is locked into position: these noises are normal.  
Arm moves down  
to lock CPU  
Step  
Step  
22  
3
4
Install the CPU cooling fans (see next page), then check  
Section 2.6-C, p.13 for details on setting the CPU FSB  
jumpers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Cooling Fan(s)  
After a CPU has been installed, you will need to install the proper cooling device* for the CPU. This  
device, a heatsink/fan combination, can be purchased at many computer retail stores. Installation of the  
cooling device* may vary depending on the fan manufacturer’s design. You should also take space into  
consideration when install a cooling device*: make sure the cooling device is not too big, or else you may  
end up damaging components around the CPU socket.  
Tyan highly recommends that you use a thin layer of  
some type of thermal compound (available from many  
computer retail stores), between the CPU and heat sink,  
to maximize distribution of heat away from the CPU.  
Please use extra caution when installing any type of  
clamp-style fan, or else damage may occur to the CPU  
socket, and/or the CPU itself. See the picture to the  
right for an example of how to connect the cooling fan’s  
power supply. Another diagram has also been provided  
below, to aid in CPU fan installation onto the socket.  
Check the note below* for more details about installation.  
Can be used to install  
a cooling device  
Mounting points on the CPU socket  
Close-up of fan connector  
FAN  
Specifications  
1
2
3
Voltage  
12V  
ground  
+12V  
speed  
Amperage 300mA  
The FAN connector has a 12V, 300mA limitation. Tyan takes no responsibility  
and will not be held liable for damage related to the misuse of any FAN jumper.  
NOTE:  
Installing Chassis Fans  
Alternatively, if you wish to also install chassis fans for increased cooling, headers are provided to power  
those fans as well (see p. 14, section 2.6-E). Chassis fan installation will vary depending on your chassis  
manufacturer’s design. Please check with your chassis manufacturer for details on proper chassis fan  
installation.  
* Please check the AMD website for recommended cooling device solutions, and more information on  
Tiger MP S2460  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.10 Connecting IDE and Floppy Drives  
A variety of IDE and ATAPI-compliant devices can be installed on this motherboard, such as hard disk  
drives (HDDs) and CD-ROMs.  
Please keep in mind that on this motherboard, the pri-  
mary IDE connector is BLACK, and the secondary IDE  
connector is WHITE. See the picture to the rightfor an  
Pin 1  
example of the IDE cable properly connected to the  
motherboard, with the BLUE end of the IDE cable  
installed on the motherboard.  
Pin 1 on the IDE cable is usually denoted by a red or col-  
ored stripe down one side of the cable. That side of the  
cable must match Pin 1 on the motherboard’s IDE con-  
nector. There will also be a key pin on the cable that  
matches with a notch in the IDE connector, to ensure  
proper installation. Consult the documentation that came  
with your IDE/ATAPI device, or contact the device’s  
manufacturer for more details on installation.  
Please note that UltraDMA-100/66 IDE HDDs require a  
special 80-wire cable (see picture at right), which has  
additional grounding wires. This cable has been  
BLUE end goes to IDE connector  
included with this motherboard for your convenience.  
The UltraDMA-100/66 cable is backwards compatible  
with UltraDMA-33 and legacy IDE HDDs.  
Only Tyan-approved cables are recommended for this motherboard. If you are using  
an existing configuration with older cables, your system might not function properly.  
Use only Tyan-approved cables (i.e. the ones included with your new motherboard).  
NOTE:  
Some symptoms of incorrectly installed HDDs are...  
May be a Master/Slave configuration problem, bad  
IDE cable, or BIOS mis-configuration. Consult the  
HDD documentation or contact your HDD vendor.  
HDDs are not auto-detected  
May be a bad cable or lack of power going to the  
drive. Check the cables for damage and bad con-  
nections.  
Hard Disk Drive Fail message at bootup  
No video or beeps during bootup  
HDD lights are constantly on  
Usually means the cable was installed backwards.  
Bad IDE cable or defective drives/motherboard. Try  
another HDD, or contact your HDD vendor.  
Check power cables and cabling. May be a bad  
power supply or IDE drive problem.  
HDD does not power on  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Floppy Drives  
See the picture below for an example of a floppy cable. Most of the current floppy drives on the market  
require that the cable be installed with the colored stripe positioned next to the power connector. In most  
cases, there will be a key pin on the cable which will force a proper connection of the cable.  
The first floppy drive (sometimes denoted as A:) is usu-  
ally attached to the end of the cable with the twist in it.  
Drive B: is usually connected to the second or third con-  
nector in the cable (the second or third connector after  
Pin 1  
you install Drive A:). Refer to your floppy drive’s installa-  
tion instructions (if available), or contact your dealer if  
you are unsure about how to attach the floppy drive(s).  
Remember, you can only have 2 floppy drives con-  
nected at any given time.  
Drive A:  
3.5” connector  
Drive B: Colored stripe  
indicates Pin 1  
This connector goes  
to motherboard  
5.25” connector Colored stripe  
indicates Pin 1  
Match striped side with Pin 1  
Figure 2.4*  
Some symptoms of incorrectly installed FDDs are...  
Usually caused by faulty cables, cables put in back-  
wards, or a bad floppy or motherboard. Try another  
floppy drive to verify the problem or try another  
cable. Also check to see if the onboard floppy is  
enabled in the BIOS.  
FDDs are not auto-detected  
The cable, floppy, or motherboard may be faulty. Try  
another cable or floppy drive to verify.  
Floppy Drive Fail message at bootup  
Check power cables and cabling. May be a bad  
power supply or IDE drive problem.  
FDD does not power on  
FDD light is constantly on  
Usually signifies that the cable is on backwards.  
Reverse the cable at the floppy drive end and try  
again.  
* Cable may vary. Diagram provided for reference only.  
Tiger MP S2460  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.11 Installing Add-on Cards  
There are a few rules you need to follow when installing add-on cards. In order to assure proper operation  
and a quick installation, adhere to the following guidelines:  
If you are going to install a PCI-bus interface card on your system, be aware that any one of the  
six PCI slots can support a Master or Slave device.  
NEVER force a card into a slot. If it won’t fit properly, look at the socket on the motherboard to  
make sure there are no wires or other obstructions to the slot. Damage will occur otherwise.  
NEVER plug an ISA card into a PCI slot. You will void your warranty, and you will damage your  
system board if you try to do this.  
When plugging the card in, especially when installing long cards, try to push the entire card in at  
one time. Don’t force one end of the card into the socket first and then the other, or a rocking  
motion between the card and the slot might occur, and could damage the pins within the socket.  
Make sure the cards are seated securely into their slots.  
Before turning on the system, make sure no cards are touching.  
Check the PCI device specifications with the PCI slot specifications (p.5) BEFORE installing!  
When installing the add-on cards, make sure the cards are installed with even force; do not insert one  
end and then the other. See the before (Figure 2.1a) and after (Figure 2.1b) example installation images  
below for details.  
1
Check orientation of card when installing  
Figure 2.1a*  
2
Push card down with even force  
Figure 2.1b*  
*
diagrams are provided as an example for installation, and may not represent an actual slot  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.12 Connecting PS/2, USB, and Serial Devices  
This motherboard includes ports for PS/2 mouse and keyboard, Universal Serial Bus (USB) devices, and  
serial and parallel devices. Please note that the upper PS/2 port is the mouse port, and the lower PS/2  
port is for the keyboard (see Figure 2.3 below).  
Installation of peripheral/external devices may vary. For details on installation of devices into the various  
ports shown below, please consult your device’s documentation, device manufacturer, or your dealer for  
details.  
Connecting Serial and Parallel Ports  
The serial and parallel ports can be used to connect various devices such as a mouse or printer. The con-  
nectors can only be connected one way: be sure and check the orientation of the connector before install-  
ing it into the port.  
PS/2 Mouse Port  
USB Ports  
Parallel Port  
PS/2 Keyboard Port  
Serial Port 1  
Serial Port 2  
Figure 2.3  
Tiger MP S2460  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.13 Connecting the power supply*  
This motherboard requires the following:  
ATX power supply, one that conforms to ATX standard 2.01 or better  
A minimum of 30+A on the +5V power line*  
The clip on the power connector should lock over the tab on the onboard connector. You shouldn’t be able  
to plug the power connector in any other way but just to be safe, make sure it looks like Figure 2.4b.  
Make certain that you do not miss connecting any of the pins because if you do, you will void your war-  
ranty and possibly cause damage to yourself and/or your motherboard when the power is turned on. After  
connecting the power, make sure the connector is seated firmly into its socket so it will not become loose  
or fall off when the computer is jostled or moved.  
Shown on the right, in Figure 2.4a, is  
the 20-pin connector of the ATX  
power supply.  
Step  
1
Note the clip in the image: it will help  
you install the plug correctly.  
This is the CLIP  
Figure 2.4a  
Shown on the right, in Figure 2.4b, is  
the 20-pin connector plugged into the  
board*.  
Step  
2
Note the TAB  
The clip is over the TAB of the  
onboard connector.  
When you connect the cable into the  
motherboard’s 20-pin onboard con-  
nector, it will make a CLICK noise as  
it is installed.  
This is normal.  
Figure 2.4b**  
Figure 2.4b is not an image of the Tiger MP ATX power connector. The Tiger MP  
**NOTE:  
power connector tab faces to the inside of the motherboard. Image provided as an  
example for installation only.  
*
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.14 You are done!  
After double-checking the jumper settings and cable connections, and putting the case back together, you  
are done setting up the computer.  
Installing a new motherboard may seem difficult, but by following these directions, you should have a  
fairly uneventful time installing our products. If you do encounter problems, your vendor/dealer will be  
able to help you, or you can consult one of our many technical support resources (see p. 63).  
Tiger MP S2460  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.15 Frequently Asked Questions (FAQ)  
Q: My system sometimes becomes unstable. How should I check the system?  
A: The first thing to do is to check and see if you have any device conflicts related to the IRQ, or DMA. If  
you are using Microsoft Windows, the Control Panel is a good place to start investigating the conflict.  
Please consult your operating system documentation for details. Secondly, check to make sure you are  
using an ATX 2.01 or better power supply that has a minimum of 30A on the +5V power line. Lastly,  
make sure the motherboard is receiving adequete cooling.  
Q: I have a question about memory compatibility; what memory will work on my motherboard?  
A: Memory compatibility information can be found on Tyan’s website at: http://www.tyan.com  
Q: I have a question about CPU compatibility; what CPU will work on my motherboard?  
A: CPU compatibility information can be found on Tyan’s website at: http://www.tyan.com  
Q: Where can I get additional accessories for my Tyan motherboard?*  
A: You can purchase additional accessories such as USB cables*, as well as other Tyan-approved acces-  
sories at the Tyan Computer Online Store: http://www.etyan.com  
Q: Where do I get pinout information for my motherboard?  
A: Pinouts of certain headers are available on the Tyan website: http://www.tyan.com  
Q: My motherboard is dead, how do I return it?  
A: Contact the place of purchase or your distributor for assistance to return the motherboard for service.  
RMA issues will not be handled via e-mail by Tyan Tech Support. Please refer to the URL link here for  
Q: How do I upgrade my BIOS?  
A: Check the section about the Flash Utility (see p. 46) for information on upgrading your BIOS. BIOS  
update files, flash utilities, and instructions on how to install them are also available from the Tyan website  
Q: Why do I get a “CMOS checksum invalid” error message during POST?  
A: If you get the above error message or “Invalid configuration, run Setup” message, it is an indication that  
the CMOS battery needs to be changed. Contact your dealer for assistance. Once you’ve replaced your  
battery or flashed your BIOS, don’t forget to check the Clear CMOS section (see p.12) so that you can  
reset your CMOS.  
*
If your chassis supports frontside USB connectors, it will usually come with the necessary cables.  
Check that your chassis is frontside USB capable. Please check with your chassis vendor for details.  
Tyan does not provide frontside USB cables.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: BIOS Setup  
Introduction to the BIOS setup  
The BIOS is the basic input/output system, required by the computer to perform functions such as CPU  
and hard drive support. This chapter describes different settings for the BIOS that can be used to config-  
ure your system.  
The BIOS section of the manual is subject to change without notice and is provided here for refer-  
ence purposes only. The settings and configurations of the BIOS are current at the time of print,  
and therefore they may not be exactly the same as that displayed on your screen.  
This manual describes the BIOS setup program. The setup program lets you modify basic configuration  
settings. The settings are then stored in a dedicated battery-backed memory, called NVRAM, that retains  
the information when the power is turned off.  
The BIOS in your motherboard is a customized version of an industry-standard BIOS for IBM PC AT-com-  
patible personal computers. It supports the AMD Athlon family of processors, and other compatible pro-  
cessors. The BIOS provides critical low-level support for the system central processing, memory, and I/O  
subsystems.  
The BIOS has been customized by adding important, but non-standard, features such as virus and pass-  
word protection, power management, and detailed fine-tuning of the chipset controlling the system. The  
rest of this manual is intended to guide you through the process of configuring your system using this  
BIOS setup program.  
Starting Setup  
The BIOS is immediately activated when you first turn on the computer. The BIOS reads system configu-  
ration information in CMOS RAM and begins the process of checking out the system and configuring it  
through the Power-On Self Test (POST).  
When these preliminaries are finished, the BIOS seeks an operating system on one of the data storage  
devices (HDD, floppy drive, etc.) If one is found, the BIOS will launch that operating system and hand  
control of system operations to it. You can start the setup program by pressing the [F2] key while the sys-  
tem is booting up.  
Tiger MP S2460  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Keys  
The table below shows how to navigate in the setup program using the keyboard.  
Key  
Tab  
Function  
Moves from one selection to the next  
Left/Right Arrow Keys  
Up/Down Arrow Keys  
Enter  
Change from one menu to the next  
Move between selections  
Opens highlighted section  
Change setting  
PgUp/PgDn Keys  
Getting Help  
Press [F1] to display a small help window that describes the appropriate keys to use and the possible  
selections for the highlighted item. To exit the Help Window press [ESC] or the [F1] key again.  
In Case of Problems  
If you discover that you have trouble booting the computer after making and saving changes with the  
BIOS setup program, you can restart the computer by either:  
Holding the power button down until the computer shuts off  
The best advice is to alter only settings that you thoroughly understand. In particular, do not change set-  
tings in the Chipset screen unless you absolutely sure that you need to. The Chipset defaults were care-  
fully chosen by Tyan or your system manufacturer for the best performance and reliability. Even a  
seemingly small change to the Chipset setup may cause the system to become unstable.  
Setup Variations  
Not all systems have the same setup program. While the basic look and function of the setup program  
remains more or less the same for all systems, the appearance of your Setup screen may differ from the  
screens shown here. Each system design and chipset combination require custom configurations. In  
addition, the final appearance of the setup program depends on your system designer. Your system  
designer can decide that certain items should not be available for user configuration, and remove them  
from the BIOS setup program.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1 Main Setup  
In this screen, you can alter general features such as the date and time, as well as access the IDE config-  
uration screens. Note that the options listed below are for options that can directly be changed within the  
Main Setup screen.  
FORMAT:  
OPTIONS:  
hh:mm:ss  
hh = hours  
mm = minutes  
ss = seconds  
System Time  
System Date  
NOTES:  
System time works on 24-hour format  
FORMAT:  
OPTIONS:  
mm/dd/yyyy  
mm = month  
dd = day  
yyyy = year  
FORMAT:  
OPTIONS:  
[size in MB] [media dimensions]  
360KB, 5 1/4”  
1.2MB, 5 1/4”  
720KB, 3 1/2”  
1.44/1.25MB, 3 1/2”  
2.88MB, 3 1/2”  
Not Installed  
Legacy Diskette A (..B)  
Disabled  
NOTES:  
This option is provided for your floppy device  
needs. It is also linked to the Boot Sequence  
in the Boot Menu.  
Primary Master/Slave  
Discussed on p. 34  
Secondary Master/Slave  
Discussed on p. 34  
FORMAT:  
OPTIONS:  
NOTES:  
[size in KB]  
N/A  
System / Extended Memory  
Large Disk Access Mode  
Cannot be altered. Provided for your informa-  
tion only.  
FORMAT:  
OPTIONS:  
[option]  
Other Select Other if you have another  
operating system such as UNIX.  
NOTES:  
A large disk is one that has more than 1024  
cylinders, more than 16 heads, or more than  
63 tracks per sector.  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
Enabled  
Boot Summary Screen  
NOTES:  
Enables or disables the information screen  
seen on boot-up of the system.  
Tiger MP S2460  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1-A. Master and Slave screens  
The following options are for setting the configuration of the IDE devices installed in the system.  
FORMAT:  
OPTIONS:  
[option]  
None  
Auto-typing is not able to  
supply the drive type, or  
the user has selected  
None to disable any  
drives that might be  
installed.  
1 to 39  
User  
Pre-configured drive  
parameters. This option is  
dependent on your drive.  
The user must define the  
different parameters of  
the drive.  
Type  
Auto  
Auto-detect the drive  
parameters.  
IDE Removeable Removeable read-and-  
write media (e.g. Zip  
drive).  
CD-ROM  
Readable CD-ROM drive.  
ATAPI Removeable Removeable ATAPI media  
(e.g. USB Zip drive).  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
NOTES:  
[#]  
1 to 65,536  
All options are dependent on the drive.  
Number of cylinders.  
Cylinders  
Heads  
FORMAT:  
OPTIONS:  
[#]  
1 to 16  
Number of read/write  
heads.  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
[#]  
1 to 63  
Number of sectors per  
track.  
Sectors/Track  
Landing Zone  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
[#]  
1 to 2048  
Number of the cylinders  
specified as the landing  
zone for the read/write  
heads.  
NOTES:  
IDE devices do not require a Landing Zone.  
FORMAT:  
OPTIONS:  
[#] or [None]  
1 to 2048  
None  
Number of the cylinder at  
which to change the write  
timing.  
Write Precomp  
NOTES:  
IDE devices do not require a Write Precomp.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(master and slave screens, continued)  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
Standard  
DIsables the feature.  
Standard is 1 sector per  
block.  
Multi-Sector Transfers  
2 sectors  
4 sectors  
8 sectors  
16 sectors  
Number of sectors trans-  
ferred per block.  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
[option]  
Disabled / Enabled Enabling LBA causes logi-  
cal block addressing to be  
LBA Mode Control  
used in place of Cylin-  
ders, Heads, and Sectors.  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
[option]  
Disabled / Enabled Enables 32-bit communi-  
cation between CPU and  
IDE card. Requires PCI or  
local bus.  
32-bit I/O  
NOTES:  
All options are dependent on the drive.  
FORMAT:  
OPTIONS:  
[option]  
Standard  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
Selects the method for  
transferring data between  
the HDD and system  
memory.  
Transfer Mode  
NOTES:  
The Setup menu only lists those options sup-  
ported by the drive and platform.  
FORMAT:  
OPTIONS:  
[option]  
Disabled / Enabled Self-Monitoring Analysis-  
Reporting Technology,  
which monitors condition  
of the HDD and reports  
SMART Monitoring  
when a catastrophic IDE  
failure is about to happen.  
Tiger MP S2460  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2 Advanced Setup  
Options such as I/O device interfaces can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
Erases all configuration  
data in a section of mem-  
ory for ESCD (Extended  
System Configuration  
Data) which stores the  
configuration settings for  
non-PnP plug-in devices.  
Reset Configuration Data  
No  
Does not erase ESCD.  
NOTES:  
Select Yes when required to restore the manu-  
facturer’s defaults.  
FORMAT:  
OPTIONS:  
[option]  
Disabled / Enabled Enables or disables the  
USB onboard controller.  
USB Host Controller  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
Enables or disables sup-  
port for Legacy USB.  
USB BIOS Legacy Support  
Chipset Configuration  
Keyboard Configuration  
I/O Device Configuration  
Discussed on p. 38  
Discussed on p. 39  
Discussed on p. 39  
FORMAT:  
OPTIONS:  
[option]  
Both  
‘Both’ enables both IDE  
ports.  
Disabled  
Primary  
Disables the ports.  
Enables the primary port  
only.  
Onboard PCI IDE  
Secondary  
Enables the secondary  
port only.  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
‘Disabled’ turns off the  
port.  
Enabled  
Auto  
‘Enabled’ requires you to  
enter the base I/O  
address and the INT num-  
ber on the next line.  
Serial Port A (..B)  
‘Auto’ makes the BIOS  
configure the port during  
POST.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(advanced setup, continued)  
FORMAT:  
OPTIONS:  
[option]  
Normal  
Selects the mode to use.  
Mode  
NOTES:  
This option is only for Serial Port B.  
FORMAT:  
OPTIONS:  
[option]  
3F8, 2F8  
3E8, 2E8  
These options are depen-  
dent on the IRQ, and vice  
versa.  
Base I/O  
Interrupt  
NOTES:  
Recommended combinations include ‘3F8,  
IRQ4’ and ‘2F8, IRQ3’.  
FORMAT:  
OPTIONS:  
[option]  
IRQ4  
IRQ3  
These IRQs are paired  
with the Base I/O option.  
NOTES:  
Recommended combinations include ‘3F8,  
IRQ4’ and ‘2F8, IRQ3’.  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
‘Disabled’ turns off the  
port.  
Enabled  
‘Enabled’ requires you to  
enter the base I/O  
address and the INT num-  
ber.  
Parallel Port  
Auto  
‘Auto’ makes the BIOS  
configure the port during  
POST.  
FORMAT:  
OPTIONS:  
[option]  
Output only  
Standard one-way proto-  
col for parallel devices.  
Bi-directional  
EPP  
Two-way protocol for par-  
allel devices.  
Enhanced Parallel Port  
interface may provide  
higher bandwidth, if an  
EPP device is used.  
Mode  
ECP  
Enhanced Capability Port  
interface may provide  
higher bandwidth, if an  
ECP device is used.  
FORMAT:  
OPTIONS:  
[option]  
378  
278  
3BC  
These options appear  
when the parallel port is  
set to ‘Enabled’.  
Base I/O  
Interrupt  
FORMAT:  
OPTIONS:  
[option]  
IRQ5  
IRQ7  
These options appear  
when the parallel port is  
set to ‘Enabled’.  
Tiger MP S2460  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(advanced setup, continued)  
FORMAT:  
OPTIONS:  
[option]  
DMA1  
DMA3  
These options appear  
when parallel port is set to  
‘Enabled’.  
DMA Channel  
PCI Configuration  
Discussed on p. 40  
3.2-A. Chipset Configuration screen  
Options related to the graphics interface can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
32MB  
64MB  
128MB  
256MB  
512MB  
1GB  
Sets the size of the mem-  
ory area reserved for stor-  
age of graphics data  
structures used by the  
AGP.  
Graphics Aperture  
None  
FORMAT:  
OPTIONS:  
[option]  
None  
ERR signals not output  
under any condition.  
Single bit  
Multiple bits  
Both  
ERR signal output for a  
single bit  
SERR Signal Condition  
ERR signal output for  
multiple bits  
ERR signal output for  
both instances.  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
No error checking.  
EC (single bit)  
Error checking & status  
report enabled. Data not  
corrected.  
ECC (multiple bits) Error checking & status  
report enabled. Data is  
ECC Config  
corrected.  
ECC Scrub  
Error checking & status  
report enabled. Data is  
corrected. Memory con-  
tents are corrected  
(scrubbed) after all reads  
with errors.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2-B. Keyboard Configuration screen  
Options related to the keyboard can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
Auto  
‘Auto’ will have the BIOS  
taking control of the Num-  
Lock key at POST.  
NumLock  
On  
Off  
NumLock will be on after  
POST.  
NumLock will remain off  
after POST.  
FORMAT:  
OPTIONS:  
[option]  
30/sec  
26.7/sec  
21.8/sec  
18.5/sec  
13.3/sec  
10/sec  
6/sec  
Sets speed at which key-  
strokes will be input into  
the system.  
Keyboard auto-repeat rate  
2/sec  
FORMAT:  
OPTIONS:  
[option]  
1/4 sec  
1/2 sec  
3/4 sec  
1 sec  
Sets speed at which key-  
strokes will initially be  
delayed from being input  
into the system.  
Keyboard auto-repeat delay  
3.2-C. I/O Configuration screen  
Options related to the I/O interface can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
AutoDetect  
BIOS will auto-detect the  
presence of a PS/2  
mouse.  
PS/2 Mouse  
Disabled  
Enabled  
Disable any installed PS/2  
mouse device.  
Enable any installed PS/2  
mouse device.  
FORMAT:  
OPTIONS:  
[option]  
Enabled  
Onboard floppy controller  
is enabled.  
Floppy disk controller  
Disabled  
Auto  
Onboard floppy controller  
is disabled.  
BIOS will detect the pres-  
ence of a floppy controller.  
Tiger MP S2460  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2-D. PCI Configuration screen  
Options related to the PCI slots can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
AGP  
PCI  
Selects primary video  
boot device  
Primary Video  
FORMAT:  
OPTIONS:  
[option]  
Option ROM Scan Enables or disables  
device expansion ROM.  
(Enable or Disable)  
Enable Master  
(Enable or Disable)  
Enables selected device  
as a PCI bus master. Not  
every device can function  
as a master. Check your  
device documentation.  
PCI Device, Slot 1 (..2, 3, 4, 5)  
Latency Timer  
Sets the bus master clock  
rate. A device that has  
high priority and high  
throughput may benefit  
from a greater value.  
(0020h, 0040h,  
0060h, 0080h,  
00C0h, Default)  
3.2-E. PCI/PnP IRQ Exclusion screen  
Options related to the PCI/PnP interrupts can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
Available  
Reserved  
Sets the availability of PCI  
IRQs to ISA devices. If set  
to ‘Reserved’, ISA devices  
are excluded from using  
the IRQ in question.  
IRQ3 [..4, 5, 7, 10, 11]  
3.2-F. PCI/PnP UMB Exclusion screen  
Options related to the upper memory buffer (UMB) can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
Available  
Reserved  
Sets the availability of the  
UMB address to ISA  
devices. If set to  
‘Reserved’, ISA devices  
are excluded from using  
the UMB address in ques-  
tion.  
C800 - CBFF  
CC00 - CFFF  
D000 - D3FF  
D400 - D7FF  
D800 - DBFF  
DC00 - DFFF  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3 Security Setup  
Security options can be altered through this screen.  
FORMAT:  
OPTIONS:  
[press the [ENTER] key]  
[Enter]  
Enter up to seven alpha-  
numeric characters. You  
will be asked to confirm  
the password. In related  
systems, features will be  
accessible only by users  
who use the supervisor  
password.  
Set Supervisor Password  
FORMAT:  
OPTIONS:  
[option]  
Disabled  
Enabled  
Enabling requires a pass-  
word on boot. Also  
requires prior setting of  
the supervisor password.  
Password on boot  
If the supervisor password  
is set and this option is  
disabled, the BIOS  
assumes the user is boot-  
ing.  
FORMAT:  
OPTIONS:  
[option]  
Normal  
Disk is unrestricted.  
Write Protect  
Write protect the boot  
sector on the fixed disk.  
Fixed disk will required a  
password to Fdisk or for-  
mat the drive.  
Fixed disk boot sector  
FORMAT:  
[option]  
OPTIONS:  
Disabled  
Enabled  
Enabling this feature will  
password-restrict diskette  
drive access.  
Diskette Access  
3.4 Power Setup  
Power management options can be altered through this screen.  
FORMAT:  
OPTIONS:  
[option]  
No  
Yes  
ACPI can be enabled or  
disabled using this option.  
ACPI Enabled  
Power Savings  
FORMAT:  
OPTIONS:  
[option]  
Customized  
User must define the  
power saving values.  
Maximum Power  
Savings  
Each of these options will  
pre-define power saving  
Maximum Perfor- values for the user.  
mance  
Disabled  
Turns off power manage-  
ment.  
Tiger MP S2460  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(power setup, continued)  
FORMAT:  
OPTIONS:  
[option]  
Off  
Inactivity period required  
to put system in Standby  
(partial power shutdown).  
1 Minute  
2 Minute  
4 Minute  
6 Minute  
8 Minute  
12 Minute  
16 Minute  
Standby Timeout  
FORMAT:  
OPTIONS:  
[option]  
Off  
Inactivity period required  
after Standby to Suspend  
(maximum power shut-  
down).  
5 Minutes  
10 Minutes  
15 Minutes  
20 Minutes  
30 Minutes  
40 Minutes  
60 Minutes  
Auto Suspend Timeout  
FORMAT:  
OPTIONS:  
[option]  
On  
Off  
Wakes up system when  
an incoming call is  
detected by the modem.  
Resume on modem ring  
Resume on time  
Resume Time  
FORMAT:  
OPTIONS:  
[option]  
On  
Off  
Wakes up system at pre-  
set time.  
FORMAT:  
OPTIONS:  
[00:00:00]  
hours  
minutes  
seconds  
Preset time to wake sys-  
tem up.  
FORMAT:  
OPTIONS:  
[00/00/0000]  
month  
day  
Preset date to wake sys-  
tem up.  
Resume Date  
year  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.5 Boot Setup  
Boot settings can be altered through this screen. All options are arranged by vertical priority.  
FORMAT:  
OPTIONS:  
[option]  
(dependent on  
Each item detected as a  
devices detected) removeable device, will  
be listed in this section.  
(menu dependent on devices  
detected  
As the user presses the  
‘+’ key, the item will move  
up in priority. The item at  
the top will take first prior-  
ity, the second item takes  
next highest priority, and  
so on.  
3.6 Exit Menu  
Selecting “Exit” will display this menu.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
No  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Saves changes to CMOS  
and exits BIOS setup.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
No  
Discard any changes and  
then exit BIOS setup.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
No  
Loads preset defaults  
from CMOS.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
No  
Discards all changes.  
Saves all changes.  
FORMAT:  
OPTIONS:  
[option]  
Yes  
No  
Save Changes  
Tiger MP S2460  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4: System Resources  
Note: If you experience problems with setting up your system, always check the following things in the  
following order:  
MEMORY, VIDEO, CPU  
By checking these items, you will most likely find out what the problem might have been when setting up  
your system. For more information on troubleshooting, check the Tyan website at http://www.tyan.com  
4.1 Beep Codes  
Fatal errors, which halt the boot process, are communicated through a series or audible beeps. For exam-  
ple, if the Phoenix BIOS POST can initialize the video but an error occurs, an error message will be dis-  
played. If it cannot display video, it will convey a series of beeps.  
If you hear one long beep followed by two short beeps, then a video problem has probably occured and  
the BIOS is having difficulty initializing the video display. Any other beep sequences that may or may not  
occur are probably due to memory problems.  
4.2 Flash Utility  
Every BIOS file is unique for the motherboard it was designed for. For Flash Utilities, BIOS downloads,  
and information on how to properly use the Flash Utility with your motherboard, you must check the Tyan  
Please be aware that by flashing your BIOS, you agree that in the event of a BIOS  
flash failure, you must contact your dealer for a replacement BIOS. There are no  
NOTE:  
exceptions. Tyan does not have a policy of replacing BIOS chips directly with end  
users. In no event will Tyan be held responsible for damage done to the BIOS by the  
end user.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix I: Glossary  
ACPI (Advanced Configuration and Power Interface): a power management specification that allows the  
operating system to control the amount of power distributed to the computer’s devices. Devices not in use  
can be turned off, reducing unnecessary power expenditure.  
AGP (Accelerated Graphics Port): a PCI-based interface which was designed specifically for demands of  
3D graphics applications. The 32-bit AGP channel directly links the graphics controller to the main mem-  
ory. While the channel runs at only 66 MHz, it supports data transmission during both the rising and falling  
ends of the clock cycle, yielding an effective speed of 133 MHz.  
ATAPI (AT Attachment Packet Interface): also known as IDE or ATA; a drive implementation that includes  
the disk controller on the device itself. It allows CD-ROMs and tape drives to be configured as master or  
slave devices, just like HDDs.  
ATX: the form factor designed to replace the AT form factor. It improves on the AT design by rotating the  
board 90 degrees, so that the IDE connectors are closer to the drive bays, and the CPU is closer to the  
power supply and cooling fan. The keyboard, mouse, USB, serial, and parallel ports are built-in.  
Bandwidth: refers to carrying capacity. The greater the bandwidth, the more data the bus, phone line, or  
other electrical path, can carry. Greater bandwidth, then, also results in greater speed.  
BBS (BIOS Boot Specification): is a feature within the BIOS that creates, prioritizes, and maintains a list  
of all Initial Program Load (IPL) devices, and then stores that list in NVRAM. IPL devices have the ability  
to load and execute an OS, as well as provide the ability to return to the BIOS if the OS load process fails  
for some reason. At that point, the next IPL device is called upon to attempt loading of the OS.  
BIOS (Basic Input/Output System): the program that resides in the ROM chip, and provides the basic  
instructions for controlling your computer’s hardware. Both the operating system and application software  
use BIOS routines to ensure compatibility.  
Buffer: a portion of RAM which is used to temporarily store data, usually from an application, though it is  
also used when printing, and in most keyboard drivers. The CPU can manipulate data in a buffer before  
copying it, all at once, to a disk drive. While this improves system performance --- reading to or writing  
from a disk drive a single time is much faster than doing so repeatedly --- there is also the possibility of  
losing your data should the system crash. Information stored in a buffer is temporarily stored, not perma-  
nently saved.  
Bus: a data pathway. The term is used especially to refer to the connection between the processor and  
system memory, and between the processor and PCI or ISA local buses.  
Tiger MP S2460  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bus mastering: allows peripheral devices and IDEs to access the system memory without going through  
the CPU (similar to DMA channels).  
Cache: a temporary storage area for data that will be needed often by an application. Using a cache low-  
ers data access times, since the needed information is stored in the SRAM instead of in the slow DRAM.  
Note that the cache is also much smaller than your regular memory: a typical cache size is 512KB, while  
you may have as much as 4GB of regular memory.  
Cache size: refers to the physical size of the cache onboard. This should not be confused with the cache-  
able area, which is the total amount of memory which can be scanned by the system in search of data to  
put into the cache. A typical setup would be a cache size of 512KB, and a cacheable area of 512MB. In  
this case, up to 512KB of the main memory onboard is capable of being cached. However, only 512KB of  
this memory will be in the cache at any given moment. Any main memory above 512MB could never be  
cached.  
Closed and open jumpers: jumpers and jumper pins are active when they are “on” or “closed”, and inac-  
tive when they are “off” or “open”.  
CMOS (Complementary Metal-Oxide Semiconductors): chips that hold the basic startup information for  
the BIOS.  
COM port: another name for the serial port, which is called as such because it transmits the eight bits of  
a byte of data along one wire, and receives data on another single wire (that is, the data is transmitted in  
serial form, one bit after another). Parallel ports transmit the bits of a byte on eight different wires at the  
same time (that is, in parallel form, eight bits at the same time).  
DDR (Double Data Rate): is a technology designed to double the clock speed of the memory. It activates  
output on both the rising and falling edge of the system clock rather than on just the rising edge, poten-  
tially doubling output.  
DIMM (Dual In-line Memory Module): faster and more capacious form of RAM than SIMMs, and do not  
need to be installed in pairs.  
DIMM bank: sometimes called DIMM sockets, because the physical slot and the logical unit are the  
same. That is, one DIMM module fits into one DIMM socket, which is capable of acting as a memory  
bank.  
DMA (Direct Memory Access): channels that are similar to IRQs. DMA channels allow hardware devices  
(like soundcards or keyboards) to access the main memory without involving the CPU. This frees up CPU  
resources for other tasks. As with IRQs, it is vital that you do not double up devices on a single line. Plug-  
n-Play devices will take care of this for you.  
Doze mode: in this mode, only the CPU’s speed is slowed.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRAM (Dynamic RAM): widely available, very affordable form of RAM which has the unfortunate ten-  
dency to lose data if it is not recharged regularly (every few milliseconds). This refresh requirement  
makes DRAM three to ten times slower than non-recharged RAM such as SRAM.  
ECC (Error Correction Code or Error Checking and Correcting): allows data to be checked for errors  
during run-time. Errors can subsequently be corrected at the same time that they’re found.  
EEPROM (Electrically Erasable Programmable ROM): also called Flash BIOS, is a ROM chip which can,  
unlike normal ROM, be updated. This allows you to keep up with changes in the BIOS programs without  
having to buy a new chip. Tyan’s BIOS updates can be found at http://www.tyan.com  
ESCD (Extended System Configuration Data): a format for storing information about Plug-n-Play devices  
in the system BIOS. This information helps properly configure the system each time it boots.  
Fault-tolerance: a term describing a system where one component can quickly be replaced without caus-  
ing a loss of service, such as in a RAID system.  
Firmware: low-level software that controls the system hardware.  
Form factor: an industry term for the size, shape, power supply type, and external connector type of the  
Personal Computer Board (PCB) or motherboard. The standard form factors are the AT and ATX,  
although Tyan also makes some Baby-AT and ATX Footprint boards.  
Global timer: onboard hardware timer, such as the Real-Time Clock (RTC).  
Handshaking: a form of encryption. One system, typically the server, sends an encryption scheme to  
another agent, typically a client. Thus, the client’s data is protected during transmittal to the server.  
HDD: stands for Hard Disk Drive, a type of fixed drive.  
H-SYNC: controls the horizontal synchronization/properties of the monitor.  
IC (Integrated Circuit): the formal name for the computer chip.  
IDE (Integrated Device/Drive Electronics): a simple, self-contained HDD interface. It can handle drives up  
to 8.4 GB in size. Almost all IDEs sold now are in fact Enhanced IDEs (EIDEs), with maximum capacity  
determined by the hardware controller.  
IDE INT (IDE Interrupt): a hardware interrupt signal that goes to the IDE.  
I/O (Input/Output): the connection between your computer and another piece of hardware (mouse, key-  
board, etc.)  
Tiger MP S2460  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Program Load (IPL): a feature built into BBS-compliant devices, describing those devices as  
capable of loading and executing an OS, as well as being able to provide control back to the BIOS if the  
loading attempt fails.  
IPL: see Initial Program Load.  
IRQ (Interrupt Request): an electronic request that runs from a hardware device to the CPU. The interrupt  
controller assigns priorities to incoming requests and delivers them to the CPU. It is important that there is  
only one device hooked up to each IRQ line; doubling up devices on IRQ lines can lock up your system.  
Plug-n-Play operating systems can take care of these details for you.  
ISA (Industry Standard Architecture): a slower 8- or 16-bit bus (data pathway).  
Latency: the amount of time that one part of a system spends waiting for another part to catch up. This is  
most common when the system sends data out to a peripheral device, and it waiting for the peripheral to  
send some data back (peripherals tend to be slower than onboard system components).  
Mirroring: see RAID.  
NVRAM: ROM and EEPROM are both examples of Non-Volatile RAM, memory that holds its data without  
power. DRAM, in contrast, is volatile.  
OEMs (Original Equipment Manufacturers): Compaq or IBM package other companies’ motherboards  
and hardware inside their case and sell them.  
Parallel port: transmits the bits of a byte on eight different wires at the same time (that is, in parallel form,  
eight bits at the same time).  
PCI (Peripheral Component Interconnect): a 32 or 64-bit local bus (data pathway) which is faster than the  
ISA bus. Local buses are those which operate within a single system (as opposed to a network bus, which  
connects multiple systems).  
PCI PIO (PCI Programmable Input/Output) modes: the data transfer modes used by IDE drives. These  
modes use the CPU for data transfer (in contrast, DMA channels do not). PCI refers to the type of bus  
used by these modes to communicate with the CPU.  
PCI-to-PCI bridge: allows you to connect multiple PCI devices onto one PCI slot.  
Pipeline burst SRAM: a fast secondary cache. It is used as a secondary cache because SRAM is slower  
than SDRAM, but usually larger. Data is cached first to the faster primary cache, and then, when the pri-  
mary cache is full, to the slower secondary cache.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pipelining: improves system performance by allowing the CPU to begin executing a second instruction  
before the first is completed. A pipeline can be likened to an assembly line, with a given part of the pipe-  
line repeatedly executing a set part of an operation on a series of instructions.  
PM timers (Power Management timers): software timers that count down the number of seconds or min-  
utes until the system times out and enters sleep, suspend, or doze mode.  
PnP (Plug-n-Play): a design standard that has become ascendant in the industry. Plug-n-Play devices  
require little set-up to use. Novice end users can simply plug them into a computer that is running on a  
Plug-n-Play aware operating system (such as Windows 98), and go to work. Devices and operating sys-  
tems that are not Plug-n-Play require you to reconfigure your system each time you add or change any  
part of your hardware.  
PXE (Preboot Execution Environment): one of four components that together make up the Wired for Man-  
agement 2.0 baseline specification. PXE was designed to define a standard set of preboot protocol ser-  
vices within a client, towards the goal of allowing networked-based booting to boot using industry  
standard protocols.  
RAID (Redundant Array of Independent Disks): a way for the same data to be stored in different places  
on many hard drives. By using this method, the data is stored redundantly, also the multiple hard drives  
willl appear as a single drive to the operating system. RAID level 0 is is known as striping, where data is  
striped (or overlapped) across multiple hard drives, but offers no fault-tolerance. RAID level 1 is known as  
mirroring, which stores the data within at least two hard drives, but does not stripe. RAID level 1 also  
allows for faster access time and fault-tolerance, since either hard drive can be read at the same time.  
RAID level 0+1 is both striping and mirroring, providing fault-tolerance, striping, and faster access all at  
the same time.  
RAM (Random Access Memory): technically refers to a type of memory where any byte can be accessed  
without touching the adjacent data, is often used to refer to the system’s main memory. This memory is  
available to any program running on the computer.  
ROM (Read-Only Memory): a storage chip which contains the BIOS; the basic instructions required to  
boot the computer and start up the operating system.  
SDRAM (Synchronous Dynamic RAM): called as such because it can keep two sets of memory  
addresses open simultaneously. By transferring data alternately from one set of addresses and then the  
other, SDRAM cuts down on the delays associated with non-synchronous RAM, which must close one  
address bank before opening the next.  
Serial port: called as such because it transmits the eight bits of a byte of data along one wire, and  
receives data on another single wire (that is, the data is transmitted in serial form, one bit after another).  
Tiger MP S2460  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SIMM (Single In-line Memory Module): formerly the most common form of RAM for motherboards. They  
must be installed in pairs, and do not have the carrying capacity or the speed of DIMMs.  
Sleep/Suspend mode: in this mode, all devices except the CPU shut down.  
SRAM (Static RAM): unlike DRAM, this type of RAM does not need to be refreshed in order to prevent  
data loss. Thus, it is faster, and more expensive.  
Standby mode: in this mode, the video and fixed disk drive (usually the HDD) shuts down; all other  
devices continue to operate normally.  
Striping: see RAID.  
UltraDMA/33/66/100: a fast version of the old DMA channel. UltraDMA is also called UltraATA. Without  
the proper UltraDMA controller, your system cannot take advantage of the higher data transmission rates  
of the new UltraDMA/UltraATA HDDs.  
USB (Universal Serial Bus): a versatile port. This one port type can function as a serial, parallel, mouse,  
keyboard, or joystick port. It is fast enough to support video transfer, and is capable of supporting up to  
127 daisy-chained peripheral devices.  
VGA (Video Graphics Array): the PC video display standard.  
V-SYNC: controls the vertical properties of the monitor.  
ZIF socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damag-  
ing the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and the metal level is pulled  
down. This shifts the processor over and down, guiding it into place on the board.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support  
If a problem arises with your system, you should turn to your dealer for help first. Your system has most  
likely been configured by them, and they should have the best idea of what hardware and software your  
system contains. Hence, they should be of the most assistance. Furthermore, if you purchased your sys-  
tem from a dealer near you, you can actually bring your system to them to have it serviced, instead of  
attempting to do so yourself (which can have expensive consequences).  
Help Resources:  
1. See the FAQ and beep codes section of this manual.  
2. See the Tyan website for FAQ, bulletins, driver updates, and other  
3. Contact your dealer for help BEFORE calling Tyan.  
4. Check the Tyan user group: alt.comp.periphs.mainboard.tyan  
Returning Merchandise for Service  
During the warranty period, contact your distributor or system vendor FIRST for any product problems.  
This warranty only covers normal customer use and does not cover damages incurred during shipping or  
failure due to the alteration, misuse, abuse, or improper maintenance of products.  
NOTE: A receipt or copy of your invoice marked with the date of purchase is required before any  
warranty service can be rendered. You may obtain service by calling the manufacturer for a  
Return Merchandise Authorization (RMA) number. The RMA number should be prominently dis-  
played on the outside of the shipping carton and the package should be mailed prepaid. Tyan will  
pay to have the board shipped back to you.  
Tiger MP S2460  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice for the USA  
Compliance Information Statement (Declaration of Conformity Procedure) DoC  
FCC Part 15: This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following conditions:  
1)  
2)  
this device may not cause harmful interference, and  
this device must accept any interference received including  
interference that may cause undesired operation. If this  
equipment does cause harmful interference to radio or televi-  
sion reception, which can be determined by turning the equi-  
ipment off and on, the user is encouraged to try one or more  
of the following measures:  
Reorient or relocate the receiving  
antenna.  
Increase the separation between the  
equipment and receiver.  
Plug the equipment into an outlet on  
a circuit different from that of the  
receiver.  
Consult the dealer or an experienced  
radio/television technician for help.  
Notice for Canada  
This apparatus complies with the Class B limits for radio interference as specified in the Canadian Depart-  
ment of Communications Radio Interference Regulations. (Cet appareil est conforme aux normes de  
Classe B d’interference radio tel que spécifié par le Ministére Candien des Communications dans les  
réglements d’inteférence radio.)  
Notice for Europe (CE Mark)  
This product is in conformity with the Council Directive 89/336/EEC, 92/31/EEC (EMC).  
CAUTION: Lithium battery included with this board. Do not puncture, mutilate, or dispose of battery in fire.  
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type rec-  
ommended by manufacturer. Dispose of used battery according to manufacturer instructions and in  
accordance with your local regulations.  
Document # D1461-103  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  

TDK Network Card HHM Series HHM2209SA2 User Manual
Technicolor Thomson Modem ST516V6 User Manual
TOA Electronics Speaker FX 51 User Manual
Tricity Bendix Oven BD 912 2 User Manual
True Fitness Treadmill Cs30 User Manual
UNICOM Electric Switch DynaGST 1602G User Manual
Vita Mix Blender On Counter Blending Station Advance User Manual
VTech Cordless Telephone CS6409 User Manual
VTech Games Alphabet Tap Tap Bus User Manual
Weber Gas Grill 450 User Manual