OWNER'S MANUAL
BETRIEBSANLEITUNG
MODE D'EMPLOI
MANUALE D'USO
MANUAL DEL USUARIO
HANDLEIDING
P. 2 -11
S. 12 - 21
P. 22 - 32
P. 33 - 42
P. 43 - 51
P. 52 - 61
S. 62 - 70
S. 71 - 80
E6R
BRUKSANVISNING
KÄYTTÖOHJE
SERIAL NUMBER
SERIENNUMMER
•
•
•
•
•
NUMERO DE SERIE
NUMERO DI SERIE
SERIENNUMMER
NÚMERO DE SERIE
•
SERIENUMMER
•
SARJANUMERO
•
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
OWNER'S MANUAL
E6R
•
ASSEMBLY
Open the transport package on its side. Take the
parts out of the package and make sure the package
includes all the following parts:
Before you start using the equipment, make sure
•
that it functions correctly in every way. Do not use a
faulty equipment.
Press the keys with the tip of the finger; your nails
•
may damage the key membrane.
Never lean on the meter.
•
1. Front frame
2. Lower frame
3. Seat frame
4. Seat (2 pcs)
5. Handlebar
6. Meter
7. Feet (2 pcs)
8. Pedals (2 pcs)
Never remove the side covers. Do not step on the
•
frame casing.
Only one person may use the equipment at a
•
•
•
•
time.
Hold the handlebar for support when getting on
or off the equipment.
Wear appropriate clothing and shoes when
exercising.
Protect the meter from sunlight and always dry the
9. Assembly kit (contents marked with in the spare
part list): keep the assembly tools, as you may need
them e.g. for adjusting the equipment.
surface of the meter if there are any drops of sweat
on it.
The equipment must not be used by persons
•
•
weighing over 135 kg.
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You’ll find a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defined as seen from
the exercising position.
Make sure the equipment is unplugged before
carrying out any assembly or maintenance proce-
dures.
Do not attempt any servicing or adjustments other
•
than those described in this guide. Everything else
must be left to someone familiar with the mainte-
nance of electromechanical equipments and author-
ised under the laws of the country in question to
carry out maintenance and repair work.
This product must be grounded. If it should mal-
•
function or breakdown, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes
and ordinances.
HANDLEBAR ASSEMBLY AND SEAT
(version without hand grip pulse) Remove the seat
fastening nuts. Place the seat upside down, for
example, on a chair. Place the handlebar, the spacer
bar and the seat frame upside down on the bottom
of the seat. Fasten the handlebar and seat to the
seat frame with nuts.
DANGER:
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if
you are in doubt as to whether the product is prop-
erly grounded. Do not modify the plug provided with
the product - if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
HANDLEBAR ASSEMBLY AND SEAT
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD
OF TUNTURI EXERCISING!
Your choice shows that you really want to invest
in your well being and condition; it also shows
you really value high quality and style. With
Tunturi Fitness Equipment, you’ve chosen a high
quality, safe and motivating product as your
training partner. Whatever your goal in training,
we are certain this is the training equipment
to get you there. You’ll find information about
using your exercise equipment and what makes
for efficient training at Tunturi’s website at
WWW.TUNTURI.COM.
(version with hand grip pulse) Remove the seat
fastening nuts. Place the seat upside down, for
example, on a chair. Place the handlebar, the spacer
bar and the seat frame upside down on the bottom
of the seat. NOTE ! Do not damage the hand grip
pulse wires. Fasten the handlebar and seat to the
seat frame with nuts. Attach the hand grip pulse
wires to the transmitter box and push the extra
wire length inside the handlebar. Detach the lid of
the transmitter box, insert batteries (3xAAA) and
close the lid.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOWER FRAME
Push the fastening screw (G) through the hole in
the seat frame tube and the assembly plate. Place
the bushing (H) on the fastening screw and secure
the plate by tightening the nut (I) on the fastening
screw. Remove the fastening nuts and washers
of the seat back and attach the seat back to the
assembly plate with them. Finally, push the plastic
caps over the nuts.
METER
Slide the retaining plate located underneath the
seat frame to the front of the bar. Fasten the lower
frame to the seat frame using the shorter M8 screw
(A) in the front and longer M8 screw (B) in the
back. Place the shorter screw (A) into the frame
hole from the end of the lower frame and the
longer screw (B) through the frame. Pass the screws
through the holes in the lower frame so that they
match the threads in the retaining plate. Make sure
the screws are tightly fastened.
Remove the tape covering the wire coming out
of the frame tube, and connect the wire with
the connector inside the meter tube. Thread the
connected wire carefully into the frame tube, and
push the meter’s connecting tube into place within
the frame tube so that the heads of the screws point
to the seat.
FEET
Secure the rear foot with two M10 bolts (C) and
washers (D). At this point tighten the bolts only
with your fingers. Lift the cycle on the floor and
turn it right side up. Fasten the front foot with the
transportation wheels to the front frame the same
way.
JOINING THE FRAMES
NOTE! Do not remove the fastening screws, but
tighten the two fastening screws of the connecting
tube by pushing the Allen key through the hole
in the frame tube to the screw head and turning
counter-clockwise. Loosen the two screws for the
drink bottle rack and secure the rack in place with
the screws.
Join the front frame and seat frame by pushing one
tube inside the other so that the screw holes in the
tubes match together. Fasten the frames with two
M8 screws (E) and washers (F). Tighten the rear
and front foot screws and push the plastic caps over
the screw heads.
PEDALS
SEAT BACK
The pedals are distinguished by the markings R
(=right) and L (=left). Fasten the right pedal to
the right pedal crank by turning clockwise and the
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
OWNER'S MANUAL
E6R
•
EXERCISING WITH TUNTURI
left pedal to the left pedal crank by turning
counter-clockwise. Fasten the pedal straps. The
straps are distinguished by the markings R (=right)
and L (=left). Choose the strap tightness, set the
appropriate strap hole on the retainer from below
and pull forcibly upwards.
When you’ve not exercised for a long time,
you should have your condition checked and
consult a doctor, if you are over 40, your physical
condition is poor, you suffer from a chronic illness
or have health problems, or you have injuries
to or problems in your muscles. For endurance
exercising, it’s good to exercise at least 3 times a
week, but remember for your health that once
a week is better than not at all. The effects of
exercising will show after just a few weeks. If you’re
very unfit, start with a 20 minute workout. Once
your condition improves, you can train for 30-60
minutes depending on your goal.
TRANSFORMER
Before connecting the equipment to a power
source, make sure that local voltage matches that
indicated on the type plate: the equipment operates
at either 230 V or 115 V (North American
version). Plug the socket end of the transformer
cord into the connector, just above the rear support
in the center of the frame, and the other end into
the wall socket.
EXERCISE LEVEL
The best training to improve your general fitness
is properly efficient, not too heavy and not too
easy. It’s good to sweat while working out, but
important still to be able to talk comfortably. This
type of exercise is called aerobic or endurance
exercise and your body produces the required
energy by burning body fat with the aid of oxygen.
This in turn leads to a reduction in fat tissue. No
matter what your goal, you’ll get the best results
by training at the right level of effort, and the best
measure is your own heart rate. First find your
maximum heart rate i.e. where the rate doesn’t
increase with added effort. If you don’t know your
maximum heart rate, please use the following
formula as a guide:
NOTE! The equipment must be connected to a
grounded wall socket. Do not use extension wires
when connecting the equipment to the power
source. Make sure the power cord does not run
underneath the equipment.
DANGER: Always switch off the power and
unplug this appliance from the electrical outlet
immediately after using.
WARNING: To reduce the risk of burns, fire,
electric shock, or injury to persons:
1) An appliance should never be left unattended
when plugged in. Unplug from outlet when not in
use, and before carrying out any maintenance or
repair procedures.
208-0,7X AGE
2) Do not operate under blanket or other
combustive material. Excessive heating can occur
and cause fire, electric shock, or injury to persons.
This is an average value and the maximum varies
from person to person. The maximum heart rate
diminishes on average by one point per year. If you
belong to one of the risk groups mentioned earlier,
ask a doctor to measure your maximum heart rate
for you. We have defined three different heart rate
zones to help you with targeted training.
CORRECT BODY POSITION
The Recumbent Ergometer E6R is designed to
comfortably distribute your weight evenly over
your buttocks and lumbar region of your lower
back. Your legs are also positioned closer to the
level of your heart, allowing a less strenuous and
more efficient cardiovascular workout. To ensure
proper positioning please follow the recommended
guidelines: the distance between the seat and
the pedals should be adjusted so that your knee
remains slightly bent when your leg is extended
to the furthest pedaling point forward. To adjust
the distance lift the lever located below the seat.
Place first your feet on the pedals, then release the
seat and push it to the right distance. Release the
lever to lock the seat. Make always sure the seat is
locked.
BEGINNER
50-60 % of maximum heart rate
•
Also suitable for weight-watchers, convalescents
and those who haven’t exercised for a long time.
Three sessions a week of at least a half-hour each
is recommended. Regular exercise considerably
improves beginners’ respiratory and circulatory
performance and you will quickly feel your
improvement.
TRAINER
60-70 % of maximum heart rate
•
Perfect for improving and maintaining fitness.
Even reasonable effort develops the heart and lungs
effectively, training for a minimum of 30 minutes
at least three times a week. To improve your
condition still further, increase either frequency or
effort, but not both at the same time!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVE TRAINER
rate
Exercise at this level suits only the fittest and
presupposes long-endurance workouts.
70-80 % of maximum heart
•
between them should be at least 1.5 m. Similarly,
if there is only one receiver and several transmitters
in use, only one person with a transmitter should
be within transmission range. The transmitter is
switched to an active state only when it is being
used for measurement. Sweat and other moisture
can, however, keep the transmitter in an active state
and waste battery energy. Therefore it is important
to dry the electrodes carefully after use.
Rest is as important as exercise in a fitness program.
If you for instance exercise conscientiously for
three weeks, it’s good to make the following week a
little lighter.
PULSE MEASUREMENT WITH
HAND GRIP PULSE
When selecting training attire, please note
that some fibers used in clothes (e.g. polyester,
polyamide) create static electricity, which may
prevent reliable heart rate measurement.
NOTE! The hand grip pulse measurement
functions with the transmitter box switch in ON
position. If you wish to use the Polar belt for heart
rate measurement, switch the hand grip pulse
to OFF position. Pulse is measured by the hand
grip sensors in the handlebars. Pulse is measured
when the user of E6R is touching both sensors
simultaneously. Pulse measurement requires that
the skin is constantly touching the sensors and
that the skin is slightly moist. NOTE! If you use
a heart rate controlled exercise or if the accuracy
of heart rate information is important to you, we
recommend heart rate measurement with the Polar
belt; unlike with the heart rate belt, the accuracy
of pulse measurement may vary considerably from
person to person.
Please note that a mobile phone, television and
other electrical appliances form an electro-magnetic
field around them, which will cause problems in
heart rate measurement.
METER
TELEMETRIC HEART RATE MEASUREMENT
This equipment has a built in pulse receiver,
which is compatible with a Polar telemetric pulse
transmitter. If you want to measure your heart
rate this way during your workout, moisten the
grooved electrodes on the transmitter belt with
saliva or water. Fasten the transmitter just below
the chest with the elastic belt, firmly enough so
that the electrodes remain in contact with the
skin while pedaling, but not so tight that normal
breathing is prevented. If you wear the transmitter
and belt over a light shirt, moisten the shirt slightly
at the points where the electrodes touch the shirt.
The transmitter automatically transmits the heart
rate reading to the meter up to a distance of about
1 meter. The heart rate value is displayed in the
meter. Follow your heart rate during the training.
KEYS AND DISPLAYS
1. MANUAL
Allows you to set your effort level with the arrow
keys during the workout.
REMARKS ON TELEMETRIC
MEASUREMENT
2. WATT CONTROL
This program allows you to preset your effort level
(in watts), i.e. pedaling effort is independent of
pedaling speed and remains exactly at the preset
level. As the pedaling speed increases the resistance
is reduced and vice versa. The set value can be
changed also during the workout. The display
shows the effort level and the changes in effort.
You can choose the effort level to your liking with
arrow keys.
If the electrode surfaces are not moist, the heart
rate reading will not appear on the display. If the
electrodes are dry, they must be moistened again.
Allow the electrodes to warm up properly to
ensure accurate heart rate measurement. If there
are several telemetric heart rate measurement
equipments next to each other, the distance
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
OWNER'S MANUAL
E6R
•
3. PROGRAMS
14. TOTAL TRAINING COUNTER
This program contains ready-made training
profiles. The program changes the effort / heart
rate level during your workout. The display shows
the profile and the changes.
Press both arrow keys simultaneously and the TIME
window will present the total training time in
hours and the DISTANCE window the total training
distance in kilometers.
4. TARGET HR
15. T-WARE PROGRAM
This program allows you to preset your pulse level,
i.e. the resistance is regulated so that your pulse
remains at the requested level. If the pulse tends to
rise, resistance is reduced automatically and vice
versa. The set value can be changed also during the
workout.
This equipment is compatible with the T-Ware
fitness testing and monitoring PC program. You can
take the T-ware program into use by installing the
T-ware to your PC and by connecting the meter
to the PC with the cable. The required cable is a
crosswired zeromodem cable with D9F connectors
at both ends.
5. RESET
Press for 2 seconds, resets all values.
OPERATING THE METER
NOTE! Protect the meter from direct sunlight, as
it may damage the liquid crystal display. Do not
expose the meter to water or severe impacts, as
these may also damage the meter.
6. ENTER
Approves set values and user parameters, activates
Quick Start-mode after pressing RESET.
7. MEMORY
The meter switches on automatically when the
cycle is connected to the power source. The display
gives out a short beep after which all the functions
are at zero. If you do not press a key, or pedal for
more than 5 minutes, the meter automatically
switches off.
Saves and recalls manual programs (P 1-8).
8. SCAN HOLD
The values displayed change at 6-second intervals.
If you want to monitor any value for a longer
period, press the SCAN HOLD key, and the display
will be locked. When you want to view the
changing values again, press the SCAN HOLD key to
unlock.
QUICK START
1. Switch on the meter or press ENTER after
pressing the RESET key.
2. You can adjust the effort level (1-32) with the
arrow keys, and the columns indicate the chosen
effort level.
9. ARROW KEYS
Used for setting values, increasing or decreasing
resistance and selecting programs.
3. Begin your workout.
10. TIME / EFFORT (W)
MANUAL
This display alternates between elapsed time and
effort in watts.
1. Select the manual function by pressing the
MANUAL key after the meter has been switched on
or after pressing the RESET key.
11. DISTANCE/RPM
2. The TIME display will start to flash. Choose the
desired duration of workout by using the arrow
keys (10-90 minutes in steps of 5 minutes). Press
ENTER. The equipment uses this value to calculate
the duration of the different effort levels during the
program.
3. Enter your weight by using the arrow keys
(default value 70 kg in the DISTANCE window). The
display reads KG . Press ENTER.
This display alternates between distance in km and
speed in revolutions per minute (RPM).
12. KCAL / HR
This display alternates between approximate
energy consumption in kilocalories and heart
rate. Since people’s capacity to produce energy
varies, the energy consumption display shows an
approximation of the real consumption.
4. Begin your workout.
5. You can adjust the effort level (1-32) with the
arrow keys, and the columns indicate the chosen
effort level.
13. SELECTING UNIT
You can select the unit of weight to be displayed by
the switch at the back of the meter housing. You
can select either KG or LB.
Programs can be saved in the memory of the meter.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WATT CONTROL PROGRAM
PROFILE P2. 3-peak effort profile for the
improvement of oxygen uptake capacity. With
relatively longlasting peaks, this profile is
specifically suitable for the physically fit. With
default setting, max. watt value is 154, average watt
value is 122.
Exercising within a certain effort range affects the
system in different ways, just as exercising within
a certain pulse range does. If you exercise at too
low an effort level for your condition, you will not
necessarily achieve the desired result even if you
exercise regularly. The WATT CONTROL program
enables training at a certain effort level, e.g. at 100
watts.
1. Select the WATT CONTROL program by pressing
the WATT CONTROL key after the meter has been
switched on or after pressing the RESET key.
2. The EFFORT display will start to flash. Set the
desired effort value in watts (20-400 W in steps
of 10 W, default 100 W) by using the arrow keys.
Press ENTER.
3. The TIME display will start to flash. Choose the
desired duration of workout by using the arrow
keys (10-90 minutes in steps of 5 minutes). Press
ENTER. The equipment uses this value to calculate
the duration of the different effort levels during the
program.
PROFILE P3. Multi-peak effort profile for the
improvement of explosive strength. Peaks are
relatively short in duration, and the level of effort
varies irregularly. This profile is suitable for all
fitness levels. With default setting, max. watt value
is 182, average watt value is 120.
4. Enter your weight by using the arrow keys
(default value 70 kg in the DISTANCE window). The
display reads KG . Press ENTER.
5. Begin your workout.
6. You can adjust the profile effort level with the
arrow keys, and the columns in the display indicate
the chosen effort level.
PROFILE P4. Uphill effort profile for the
improvement of endurance fitness. Peaks are
relatively longlasting, increasing in intensity until
the closing phase of the profile. This profile is
specifically suitable for the physically fit. With
default setting, max. watt value is 210, average watt
value is 133.
Programs can be saved in the memory of the meter.
PROGRAMS
This program contains ready-made training
profiles. The program changes the effort / heart
rate level during your workout. The display shows
the profile and the changes. The pre-programmed
profiles are designed to make your training routine
more varied and interesting: you can use any of
the profiles as the basis for your workout, but you
should adjust the effort range before or during the
exercise session to suit your fitness level by using
the arrow keys.
PROFILE P5. 3-peak heart rate profile for the
improvement of oxygen uptake capacity. With
relatively longlasting peaks, this profile is suitable
for beginners. With default setting, max. HR value
is 136, average HR is 119.
PROFILE P1. 3-peak effort profile for the
improvement of oxygen uptake capacity. With
peaks relatively short in duration, this profile is
suitable for beginners. With default setting, max.
watt value is 182, average watt value is 121.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
OWNER'S MANUAL
E6R
•
PROFILE P6. Uphill heart rate profile where the
heart rate increases steadily until the midpoint
of the profile, steadily decreasing thereafter. This
profile is suitable for beginners. With default
setting, max. HR value is 157, average HR is 126.
5. Begin your workout. If the set effort / heart rate
value seems too strenuous or easy, change the value
by using the arrow keys. The display shows the
present effort / heart rate level.
TARGET HR PROGRAM
The TARGET HR program enables training at
the requested pulse level. The program requires
measurement of heart rate.
1. Select the TARGET HR program by pressing
TARGET HR after the meter has been switched on or
after pressing RESET.
2. The HR display will start to flash. Set the desired
heart rate value (default 110 bpm) by using the
arrow keys. Press ENTER. NOTE! The preset value
can be changed during the training.
3. The TIME display will start to flash. Choose the
desired duration of workout by using the arrow
keys (10-90 minutes in steps of 5 minutes). Press
ENTER. The equipment uses this value to calculate
the duration of the different effort levels during the
program.
PROFILE P7. 3-peak heart rate profile for the
improvement of endurance fitness. Peaks are
relatively longlasting, but the heart rate level
remains fairly constant throughout. This profile is
suitable for all fitness levels. With default setting,
max. HR value is 155, average HR is 131.
4. Enter your weight by using the arrow keys
(default value 70 kg in the DISTANCE window). The
display reads KG . Press ENTER.
5. Begin your workout. If the set heart rate value
seems too strenuous or easy, change the heart rate
value by using the arrow keys. The display shows
the present heart rate level.
PROFILE P8. 3-peak heart rate profile for the
improvement of oxygen uptake capacity. Peaks
are relatively longlasting, with each followed by a
steady recovery period. This profile is specifically
suitable for the physically fit. With default setting,
max. HR value is 170, average HR is 137.
Programs can be saved in the memory of the meter.
MEMORY FUNCTION
The meter enables saving of 8 manually made
programs to its memory.
SAVING THE PROGRAMS
When you wish to save a program in the memory
of the meter, press the MEMORY key after your
workout session. Choose the desired memory
location (P1-8) by using the arrow keys. Press
ENTER. Your program is now saved in the memory
of the meter. A total of 32 changes are saved in
each program.
1. Press PROGRAMS after the meter has been
switched on or after pressing RESET.
2. Select desired the program (P1-P8) with the
arrow keys or with the PROGRAMS key. Press
ENTER.
RUNNING THE PROGRAMS
1. When you want to use an earlier saved program,
press the MEMORY key after the meter has been
switched on or after pressing RESET.
2. Choose the desired program with the MEMORY
key or arrow keys. Press ENTER.
3. The time display will start to flash. Choose the
desired duration of workout by using the arrow
keys (10-180 minutes in steps of 5 minutes,
default: last saved time). Press ENTER.
3. The TIME display will start to flash. Choose the
desired duration of workout by using the arrow
keys (10-180 minutes in steps of 5 minutes, default
20 minutes). Press ENTER. The equipment uses
this value to calculate the duration of the different
effort levels during the program.
4. Enter your weight by using the arrow keys
(default value 70 kg in the DISTANCE window). The
display reads KG. Press ENTER.
4. Enter your weight by using the arrow keys
9
Download from Www.Somanuals.com. All Manuals Search And Download.
(default value 70 kg in the DISTANCE window). The
display reads KG . Press ENTER.
5. Begin your workout.
After exercising, clean the equipment with a
•
soft, absorbent cloth. Do not use solvents. Sweat
may cause corrosion: we recommend therefore that
you protect all metal surfaces outside the plastic
covers with teflon or car wax.
Never remove the equipment’s protective casing.
The electromagnetic brake forms a magnetic
field that may damage the mechanism of a watch,
or the magnetic identification strip on a credit
or cash card, should they come into immediate
contact with the magnets. Never attempt to detach
or remove the electromagnetic brake!
NOTE! If you wish, you can adjust the effort level
with the arrow keys during the training. If you
want to save these changes in the memory, press
the MEMORY key after your workout and choose the
desired memory location. Press ENTER to confirm
saving.
•
•
PAUSE
The electromagnetic brake is based on
•
The values in a workout that has been interrupted
are saved in the memory of the user interface for
5 minutes, after which they are reset. You can
restart the interrupted exercise by pedaling within
5 minutes.
electromagnetic resistance; resistance level is
electronically measured and shown as watt reading
on the display. Due to the measurement system,
your Tunturi ergometer need not be re-calibrated
when assembled, serviced and used according to
this Owner’s Manual.
ERROR CODES
If the equipment is not used for a period
•
of time, the transmission belt may become
temporarily distorted. This can lead to a sensation
of slightly uneven pedaling. However, after a few
minutes of use the effect disappears as the belt
returns to its original form.
The user interface will display information about
operational faults.
Err 2 Data communication problem
Remove the power cord from the power outlet,
wait for 1 minute and then restart. If the error
message does not disappear, please contact your
Tunturi dealer.
NOTE! If the equipment does not function
properly during use, contact your Tunturi dealer
immediately. Always give the model and serial
number of your equipment. Please state also the
nature of the problem, conditions of use and
purchase date. Despite continuous quality control,
defects and malfunctions caused by individual
components may occur in the equipment. In most
cases it’s unnecessary to take the whole equipment
in for repair, as it’s usually sufficient to replace the
defective part.
TRANSPORT AND STORAGE
Please follow these instructions when carrying
and moving the cycle about, because lifting it
incorrectly may strain your back or risk other
accidents:
NOTE! Always switch the power off and unplug
the power cord before you start moving the
equipment around!
TECHNICAL SPECIFICATIONS
Length..............................165 cm / 65 in
Height .............................100 cm / 40 in
Width .............................67 cm / 27 in
Weight ............................63 kg / 140 lbs
Move the recumbent cycle according to the
following instruction: stand behind the cycle and
take it by the seat frame with one hand and by the
handlebar with the other hand. Lift the E6R so
that it rests on the transport wheels and move it by
wheeling. Lower the cycle on the floor while
holding on to it and remaining all the time behind
the equipment.
All Tunturi models meet the requirements of
the EU’s EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain voltage
limits (73/23/EEC). This product therefore carries
the CE label.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.
The North American versions (115 V) comply
with FCC requirements on electromagnetic
compatibility and are accordingly marked with
the FCC label. The North American versions also
comply with the following safety standards: UL
1647 and CSA C 22.2 No. 68-92.
MAINTENANCE
The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
OWNER'S MANUAL
E6R
•
All Tunturi ergometers meet EN precision and
safety standards (Class A, EN-957, parts 1 and 5).
Due to our continuous policy of product
development, Tunturi reserves the right to change
specifications without notice.
NOTE! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment
and maintenance instructions described herein.
Changes or modifications not expressly approved
by Tunturi Oy Ltd will void the user’s authority to
operate the equipment!
We wish you many enjoyable trainings with
your new Tunturi training partner!
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
E6R
1
2
-
-
3
-
4
5
2
-
6
7
-
-
8
-
233 1055
153 9003
User interface (incl. 10)
Seat back
Washer
Nut
Seat
Nut nylon
Receiver
Plug, no for telem. handle bar
1
1
4
4
1
2
1
45
47
-
-
53
-
443 9003
513 9002
Transmission belt
Belt tightener frame
Washer
Retaining
Pulley
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
2
2
1
3
1
3
1
14
2
4
1
2
1
3
1
2
2
2
2
1
6
6
6
1
1
1
1
1
1
1
1*
1
1
1
1
1
1
1
1
1
1
1
1
M8 DIN 125
M8 DIN 934
153 9001
M8 DIN 985
403 0042
12x18x1 DIN 988
10 DIN 471A
263 1007
17 DIN 471A
353 1005 1
353 1004 1
653 0073
363 1002
363 1001
103 9007
M8x40 DIN 912
M8x65 DIN 912
103 9009
M8 DIN 125
M8x20 DIN 933
173 9005
M4x25 DIN 7500C Screw
173 9006
M4x25 DIN 7500C Screw
103 9011
Retaining
54
-
Crank, RH
Crank, LH
Screw-plug
Pedal band, pair
Pedal, pair (incl. 56)
Rail support
Screw
Screw
Inner tube
Washer
533 7039
55
56
57
58
* -
* -
59
* -
* -
60
-
533 7024
213 1004
203 9004
203 9002
M8 DIN 985
403 9006
Plug, for telem. handle bar
Handle grip (telem.h.p. 1 pc) 2
Handle bar (incl. 5, 6)
Handle bar (incl. 5, 6, 8)
Nut nylon
2
1
1
4
1
2
1
1
1
1
1
1
2
1
1
4
2
2
4
1
2
1
1
1
2
Telemetric hand pulse
4,2x16 DIN 7504-K PT-Screw
9
10
13
173 9012
423 9010
403 9011
User interface lower cover
Membrane
Cable set (incl. 13a,13d,13e,13g)
Screw
Rear plug
13c 403 1026
RPM-magnet
Bezel
Tube
Screw
Plug
Frame
Stand plug
Label set (incl.19a, 19b)
Side cover, LH and RH.
60
-
61
Front plug
14
15
-
16
17
18
19
20
-
21
22
-
24
-
30
31
-
-
-
-
32
-
33
-
-
683 1011
103 9013
M8x20 DIN 7380
533 4047
103 9005
533 1050
423 9006
173 1053
KB 40x20 WN-1411 PT-Screw
533 9012
Seat rail
*62 533 0020
63
-
64
-
-
-
65
-
-
-
M8 plug (* 6 pcs)
Fastener plate
Screw
Adjusting plate
Screw
Screw
Nut
Seat frame
Nut
Washer
503 9009
M8x20 DIN 913
503 9008
M8x20 DIN 912
M8x20 DIN 7991
M8 DIN 934
153 9004
M8 DIN 934
652 133
M8x16 DIN 933
343 9004
343 9005
533 9013
652 133
M8x20 DIN 933
213 9003
643 9003
433 9003
433 1018
533 9011
453 9002
592 9002
Plug
Nut
Washer
Flywheel
653 1017
12x18x05 DIN 988
303 9003 E5R
Screw
17x24x1,5 DIN 988 Washer
66
67
68
-
Axle, upper
Axle, lower
Roller
Washer
Screw
Locking lever
Spring
Spacer
Front cover
Plug
Bottle
Rack
Locking knob
Screw
Sleeve
Fastener plate
Plate
72 0813 100 1
403 1087EU
403 1087GB
403 1087USA
403 1087JPN
403 1087AUS
403 1083
M4x12 DIN 7005C Screw
403 1082
M6x50 DIN 931
M6 DIN 125
Sleeve
Transformer 24VDC, EUR 1
Transformer 24VDC, GB
Transformer 24VDC, USA
Transformer 24VDC, JPN
Transformer 24VDC, AUS
Control card, compl.
1
1
1
1
1
2
1
4
4
4
2
2
1
-
69
70
71
72
73
74
75
El. magnet
Screw
Washer
M10 plug
Snap locking
Wheel
Front support
compl. (incl. 18, 30, 36, 37) 1
Washer
Screw
Rear support
Washer
Screw
*35 533 1046
*91 533 1019
-
*92 7208131001
93
135 33 1017
-
*
*
*
*
*
-
36
37
38
-
673 500 88
533 1048
103 1038
M8x80 DIN 603
503 9007
103 1039
* -
* -
39
* -
* -
40
41
42
43
44
M10 DIN 125
M10x25 DIN 933
103 9006
M10 DIN 125
M10x25 DIN 933
643 104 89
523 504 84
523 1010
2
2
1
2
2
1
1
1
2
1
M5 DIN 934
Nut
553 9003
553 0002
556 0003
556 031 00
556 0001
583 9005
583 0006
Assembly kit (incl. *)
Box spanner
Screw driver
Allen key 5mm
Allen key 6mm
Owner’s manual
Warranty booklet
Spring
Bearing, flywheel
Bearing, flywheel
Bearing
-
523 409 85
343 1010
Flywheel axle
83
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNTURI OY LTD
P.O.BOX 750, FIN-20361
Turku, Finland
Tel. +358 (0)2 513 31
Fax +358 (0)2 513 3323
583 1031 B
Download from Www.Somanuals.com. All Manuals Search And Download.
|