Operating Instructions
PROFESSIONAL SOUND SYSTEM
Model SR-F1
Model SR-L1
Speaker System
Super Woofer System
the SR-L1. If the SR-L1 connector is wrongly connected to
the SR-F1, sound is not reproduced.
GENERAL DESCRIPTION
SR Series loudspeakers from TOA are compact integrated
speaker systems for use in sound reinforcement applica-
tions with an emphasis on quality sound and durability,
and for easy transportation.
The SR-F1 is designed to make an angle of 15° at both
sides of the enclosure. When lining up two speakers or
more, they are in all directions and mutual interference is
reduced in high frequency range.
The SR-F1 speaker system and the SR-L1 super woofer
system provide a wide frequency response and high pow-
er handling capacity. The system can be composed with
the SR-F1 to reproduce the low/high frequency range and
the SR-L1 to reproduce the super-low frequency range.
These speakers are used with the AC-F1 or the AC-L1
Electronic control unit.
FEATURES
SR-F1 features
1. Electronic-controlled system with the AC-F1 Electronic
control unit.
2. High power capacity of 120 watts continuous pink noise
for low frequency and 80 watts for high frequency.
3. 30cm (12") woofer using a larger magnet.
4. HFD-651 type high power driver with LE Series Con-
stant directivity (CD) horn (60° horizontal by 40° vertic-
al).
5. Fixing metals for suspension provided on top and bot-
tom sides of the enclosure.
6. Provided an angle of 15° at both sides of the enclosure
to prevent mutual interference in high frequency range.
The SR-F1 reproduces transcient response characteristics
in the low frequency range more one ranking up magnet
than that of 30cm (12") woofer used up to this time.
The driver unit for the SR-F1 is used the HFD-651 high
power driver unit improved for the system, and LE Series
Constant directivity (CD) horn ensures a uniform sound
dispersion pattern (60° horizontal by 40° vertical).
The 38cm (15") woofer of SR-L1 ensure ultra-linear to
super-low frequency range with a 72mm (2.8") diameter
voice coil driven by powerful double magnets. Bass reflex
ports are tuned to the optimum conditions by computer
allowing the woofer to provide maximum performance.
SR-L1 features
1. Electronic-controlled system with the AC-L1 Electronic
control unit.
2. High power capacity of 300 watts continuous pink
The SR-F1 provides each two fixing metals for the suspen-
sion (Aeroquip made) on top and bottom boards.
noise.
3. Ultra-linear, high power 38cm (15") woofer.
4. Bass reflex enclosure tuned to optimum conditions by
computer.
The enclosure is made by APITON plywood, and the rug-
ged enclosure finished with FRP (Fibre reinforced plastic)
coating is shock-resistant to transport it on the road.
General features
1. Cannon EP-4-14 input connector.
2. APITON plywood enclosure with rugged FRP coating.
3. Removable punched metal front grill.
Cannon EP-4-14 is used for input connectors enabling to
perform the quick and secure system up at site. The SR-F1
is designed to change the pin number combination from
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Suspending the SR-F1.
Note: The SR-L1 can not be suspended.
Caution
The weight of the SR-F1 is approximately 38kg (83.8 Ib). When suspending this speaker, make sure to install it
after investigating structure of installation places, and confirming that the suspending wires or belts are heavy-
duty to this speaker.
Secure to lock the fixing metals of the suspending wire/bolt to the speaker.
TOA takes no responsibility for any accidents or injuries resulting from the falling of the SR-F1 due to incorrect
installation.
Make sure to perform the general suspending installation of the speaker referring to the
following figures.
Be sure to use each two suspending wires or
belts, and each wire should be fixed the ceiling
reinforcement.
Even in case of oblique installation of the
speaker, be sure to use each two suspending
wires or belts.
In case of coupled installation of speakers verti-
cally, be sure to connect less than two speak-
ers.
Never suspend the speaker with the following figures.
To suspend the speaker
by the ringed one wire.
To suspend the speaker
by one wire from the ceiling.
To suspend using the
handles of speaker.
To vertically suspend coupling
no more than two speakers.
Suspending metal.
Fixing metal as accessory of the SR-F1.
32206 Pan Fitting (Aeroquip made)
Procure the following applicable metal at site.
32326 Ring Fitting (Aeroquip made)
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SR-F1
SR-L1
Bass reflex type
Enclosure
One 30cm (12") dia. cone speaker
Two 38cm (15") dia. cone speakers
Low frequency
Speaker
CD horn (60° horizontal by 40° vertical)
plus compression driver
High frequency
—
Low frequency: 8
High frequency: 16
8
x2
Nominal impedance
Sensitivity
Low frequency: 98dB(1W/1m)
High frequency: 110dB(1W/1m)
96dB (1W/1m)
35Hz~1kHz
70Hz~20kHz at AC-F1's use
1kHz at AC-F1's use
Frequency response
Crossover frequency
125Hz at AC-L1's use
Continuous pink noise: 300W RMS
(Band-limited 40Hz~1kHz)
Continuous pink noise: 120W RMS
(Band-limited 50Hz~1kHz)
Low frequency
Continuous program : 900W
Continuous program : 360W
Power
handling
capacity
Continuous pink noise: 80W RMS
(Band-limited 1kHz~20kHz)
Continuous program : 240W
High frequency
—
Cannon EP-4-14
Apiton plywood
Input connector
Enclosure material
Weight
81kg (178.6 Ib.)
38kg (83.8 lb.)
829(W)x629(H)x602(D) mm
32.6(W)x24.8(H)x23.7(D) in.
390(W)x619(H)x362(D) mm
15.4(W)x24.4(H)x14.3(D) in.
Dimensions
Enclosure: FRP coating in gray color
Front grill: Black-painted.
Finish
Specifications are subject to change without notice.
Accessories: Operating instructions .....................1
Warranty card..........................................................1
Characteristic Diagrams (1/3 Octave Pink Noise)
Polar response (1W/4m)
Horizontal
SR-F1 (at AC-F1 electronic control unit's use)
Frequency response (1W/1m, at 300Hz)
Vertical
SR-L1 (at AC-L1 electronic control unit's use)
Frequency response (1W/1m, at 100Hz of crossover IN)
General frequency response (1W/1m, at 300Hz of the SR-F1)
SR-L1+AC-L1, SR-F1+AC-F1 AC-L1: Crossover OUT
Crossover OUT
AC-L1 mode
Crossover IN
TOA Corporation
Printed in Japan
133-01-293-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|