Troy Bilt Tiller 664D E666M User Manual

Operator’s Manual  
Rear-tine Tiller Model  
664D—Pony®  
E666M—Pony®  
IMPORTANT:READ SAFETY RULES AND INSTRUCTIONS CAREFULLY  
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-  
covered or grass-covered land unless the engines exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).  
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law  
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester  
for the muffler is available by contacting the service department at Troy-Bilt LLC, P.O. Box 361131 Cleveland, Ohio 44136-0019.  
TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019  
PRINTED IN USA  
FROM NO. 770-10597A  
(11/2002)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 29  
Models 664D & E666M  
HANDLEBAR ASSEMBLY and CONTROL LEVERS  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
3
3A  
4
5
5A  
6
7
8
9
1918811  
GW-9126  
777I22088  
777D05553  
1916784  
1186347  
GW-9955  
1900475  
710-0514  
736-3050  
712-3000  
1918791  
GW-9442  
Handlebars (Incl. Refs. 2, 3 & 3A).......  
Grip .....................................................  
Decal, Control Panel ...........................  
Decal, Model Name/Logo ....................  
Reverse Clutch Control Cable ..............  
Height Adjustment Screw ...................  
Washer, Keyed.....................................  
Bracket, Handlebar Height Adjustment  
Hex Hd. Screw, 3/8-16 x 1*.................  
Washer, Plain (flat) 3/8, S.A.E. ............  
Hex Locknut, 3/8-16............................  
Cable, Forward Clutch Control.............  
Wheel Gear Control and Cable Assy.  
(Incl. Refs. 14, 15, 19, 21, 22 & 23)  
Knob, Wheel Gear Control Lever..........  
1
2
1
1
1
1
1
1
2
2
2
1
15  
16  
17  
19  
21  
22  
23  
24  
25  
1186211  
710-0216  
736-0169  
725-0157  
1114748  
1100240  
1186208  
GW-9390  
1918840  
Hex Nut, 5/16-24 .................................  
Hex Hd. Screw, 3/8-16 x 3/4*..............  
Lockwasher, 3/8 ..................................  
Cable Ties, Plastic................................  
Round Hd. Screw, #10-32 x 1/2 ..........  
Lockwasher, #10 .................................  
Hex Nut, #10-32 ..................................  
Grip .....................................................  
Bail, Forward Clutch Control (Incl.  
two Ref. 24).....................................  
Sems Nut.............................................  
Bracket, Bail Support...........................  
Hex Flange Screw, self-tapping,  
2
2
2
2
6
2
2
2
1
4
2
35  
36  
42  
GW-9853  
GW-20806  
710-0599  
10  
13  
1
1
1/4-20 x 1/2*...................................  
2
14  
GW-9057  
* Specify GRADE 5 if ordering part locally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 Parts List  
Models 664D & E666M  
ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER  
36  
5
6
1
Reverse  
Clutch Cable  
7
7
2
3
4
9
10  
20  
55  
13  
11  
35  
14  
16  
17  
15  
56  
16  
45  
52  
35  
40  
20  
39  
42  
46  
18  
48  
21  
45  
(Screw, Ref. 47, secures  
Forward Clutch Cable  
page 28, Ref. 10)  
20  
43  
38  
44  
49  
51  
50  
43  
44  
53  
54  
8
22  
12  
47  
9
37  
24  
25  
41  
23  
26  
27  
30  
3
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 31  
Models 664D & E666M  
ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
**  
**  
Engine standard recoil start ............  
Engine electric start ........................  
Bracket, Clutch Cable ..........................  
Lockwasher5/16................................  
Hex Hd. Screw, 5/16-24 x 1/2.............  
Decal, Hot Surfaces/Belt Warning .......  
Cover (Incl. Ref. 5)..............................  
Flange Lock Nut, 5/16-18....................  
Key, 3/16 x 1-1/2 ................................  
Shim ...................................................  
Pulley, Engine Drive ............................  
Belleville Washer.................................  
Hex Hd. Screw, 5/1624 x 1-1/8.........  
Hex Hd. Screw, 5/1618 x 2 ...............  
Reverse Idler Arm ...............................  
Pulley, Reverse Idler ...........................  
Flat Washer, 5/16................................  
Belt Guide, Wire Formed ....................  
Hex Head Screw, 5/16-24 x 1..............  
Washer, Shoulder ...............................  
Washer, Flat, 1-1/8..............................  
Spring, Reverse Return.......................  
Transmission Pulley............................  
Support Washer..................................  
Reverse Clutch Belt.............................  
Forward Clutch Belt.............................  
Self-tapping Screw, #10-32 x 1/2, ......  
1
1
1
6
2
1
1
2
1
1
1
2
1
1
1
1
2
1
1
1
3
1
1
1
1
1
4
27  
28  
29  
30  
31  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
GW-20339  
712-0267  
1186329  
1916797  
1916796  
710-0805  
777I20942  
1918774  
GW-90063  
710-3037  
736-0275  
1918846  
GW-55088  
736-0119  
712-0267  
1917746  
1918744  
1767754  
1916727  
712-3000  
GW-9090  
710-0347  
712-0158  
1754128  
736-0463  
714-04029  
710-0539  
Guard, Belts/Pulleys............................  
Hex Nut, 5/1618................................  
Hex Flange Screw, 5/16-18 x 3/4* ......  
Engine Support Bracket, left side ........  
Engine Support Bracket, right side......  
Hex Hd. Screw, 5/1618 x 1-1/2.........  
Decal, Stabilization..............................  
Mounting Bar ......................................  
Hex Flange Screw, 5/16-18 x 1 ...........  
Hex Hd. Screw, 5/16-18 x 2-1/4*........  
Flat Washer, 5/16'...............................  
Belt Guide, Pony .................................  
Pivot Bushing......................................  
Lockwasher, 5/16................................  
Hex Nut, 5/16-18.................................  
Washer, Shoulder ...............................  
Idler Arm, Forward Tiller Direction......  
Screw, self tapping, #10-24 ................  
Spring .................................................  
Hex Locknut, 5/16-18 .........................  
Idler Pulley, Forward ..........................  
Screw, 3/8-16 x 1-3/4 .........................  
Hex Lock Nut, 5/16-18........................  
Screw, 1/4-20 x 3/4 ............................  
Flat Washer1/4..................................  
Key, .188 x 1.75..................................  
Screw, 3/8-24 x 1.75...........................  
1
4
4
1
1
5
1
2
4
1
1
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
1917326  
736-0119  
710-0107  
777S30651  
1917139  
712-3004A  
1108841  
GW-1138-1  
619-04015  
GW-9944  
GW-9572  
710-3103  
1918731  
1916535  
1107382  
1916725  
710-0117  
1917746  
GW-9929  
1916728  
1916522  
GW-1440  
1918812  
1909404  
1900396  
* Specify GRADE 5 if ordering part locally.  
** See your local authorized engine service dealer for engine parts or  
service. Refer to engine nameplate for engine type and code  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Parts List  
Models 664D & E666M  
TRANSMISSION HOUSING, COVERS, SEALS, GASKETS, PLUGS  
NOTE 1: These screws are a special sealing screw  
that cannot be reused without risking the loss of  
transmission oil. If these screws are loosened or  
removed, they must be replaced with new screws.  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
3
4
5
6
GW-9621  
1105620  
721-04001  
1186329  
1983632  
GW-11513  
Oil Seal (Double Lip), Wheel Shaft......  
Pipe Plug, 1/4, ...................................  
Seal, Transmission Bore .....................  
Hex Flange Screw, 5/16-18 x 3/4* ......  
Oil Seal, Input Pinion Shaft .................  
Transmission Cover (Incl. four Ref. 18  
and two ea. Refs. 21 & 22)..............  
Gasket, Transmission Top Cover ........  
Transmission Case Assy. ....................  
Plug ....................................................  
Mounting Plate, Wheel Clutch Cable ...  
Oil Seal, Tiller Shaft.............................  
Hex Flange Screw, 5/16-18 x 5/8* ......  
2
2
1
6
1
13  
14  
GW-20873  
GW-1129-1  
Tiller Housing Cover, left side .............  
Gasket, Tiller Housing Cover, .010"  
(fits all covers) ................................ A/R  
Screw Kit: Incl. three 1/4-20 x 7/8  
Self-Sealing Screws ........................ A/R  
Rear Bearing Cap ................................  
Gasket, Rear Bearing Cap, .010"  
Thick ............................................... A/R  
Hex Flange Screw, 5/16-18 x 1* .........  
Screw Kit: Incl. five 1/4-20 x 5/8  
Self-Sealing Screws ........................ A/R  
Lockwasher, 3/8..................................  
Hex Hd. Screw, 3/8-16 x 3/4*.............  
1
15  
1915089  
16  
17  
GW-1115  
GW-1124-2  
1
1
1
1
1
1
2
2
7
8
9
10  
11  
12  
GW-20694  
619-04010  
GW-9467  
GW-20889  
721-04035  
1186328  
18  
19  
GW-90063  
1915087  
4
21  
22  
736-0169  
710-0216  
2
2
* Specify GRADE 5 if ordering part locally.  
A/R As Required  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 33  
Models 664D & E666M  
DRIVE SHAFT, INPUT PINION SHAFT and GEAR ASSEMBLIES  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
MAIN DRIVE SHAFT  
INPUT PINION SHAFT & GEAR ASSEMBLY  
1
2
3
4
GW-1714  
GW-20718  
GW-9301  
GW-20912  
Bearing, Tapered Roller with Race ....  
Spur Gear..........................................  
Key, 3/16 sq. x 1 ...............................  
Main Drive Shaft (Drive shaft is one-  
piece with integral, single-lead,  
work-hardened front worm, and  
integral, six-lead, work-hardened  
rear worm. Also includes pressed-  
on GW-1714 and GW-9301)..........  
Shim, Rear Bearing Cap, .010" thick  
(see Note below) ........................... A/R  
Shim, same as above, but .030" thick  
(see Note)...................................... A/R  
Shim, same as above, but .005" thick  
(see Note)...................................... A/R  
Shim Set (Incl. two GW-1224-1; two  
1224-2 and one GW-1224-3) ........ A/R  
1
1
1
6
7
GW-9572  
GW-9944  
Hex Hd. Screw, 5/16-24 x 1-1/8*......  
Washer, Disc Spring (concave  
1
surface faces pulley)......................  
Key, 3/16 sq. x 1-1/2.........................  
Transmission Drive Pulley.................  
Support Washer ................................  
Oil Seal, Input Pinion Shaft................  
Retaining Ring (external) ..................  
Thrust Washer...................................  
Bushing.............................................  
Set Screw, 5/16-18 x 3/8*.................  
Input Pinion (steel shaft)...................  
Input Pinion Gear ..............................  
Retaining Ring (external) l.................  
Pinion Assy. (Incl. one each Refs. 16,  
1
1
1
1
1
1
2
1
1
1
1
1
8
9
1108841  
1916522  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
GW-1440  
721-04044  
1113527  
GW-9953  
GW-9428  
GW-9677  
GW-20791  
GW-20792  
GW-9093  
GW-20799  
1
5
5
GW-1224-1  
GW-1224-2  
GW-1224-3  
GW-1325C  
5
...  
17 and 18 ...................................... A/R  
Retaining Ring (internal) ..................  
20  
GW-9517  
1
NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.  
A/R - As Required  
* Specify GRADE 5 if ordering part locally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Parts List  
Models 664D & E666M  
WHEEL SHAFT, ECCENTRIC SHAFT and TILLER SHAFT ASSEMBLIES  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
3
---  
---  
---  
4
5
6
7
8
721-04031  
1909950  
GW-1166-1  
GW-1166-2  
GW-1166-3  
GW-1166-4  
GW-1086  
711-04091  
GW-9373  
GW-20914  
GW-9935  
Oil Seal..............................................  
Retaining Ring (heavy-duty, external)  
Shim, 1-1/64 I.D., .062" thick ............ A/R  
Shim, as above, but .030" thick ......... A/R  
Shim, as above, but .015" thick ......... A/R  
Shim, as above, but .010" thick ......... A/R  
Bushing.............................................  
Wheel Shaft (Incl. Ref. 6) ..................  
Hi-Pro Key, 1/4 x 1-5/16....................  
Wheel Drive Worm Gear (cast-iron) ..  
Shim (between key and gear),  
2
2
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
GW-20712  
611-04002  
GW-1442  
GW-9055  
721-04034  
GW-20700  
710-3013  
741-3037  
711-04080  
GW-1104  
GW-20913  
Wheel Drive Clutch (cast-iron) ..........  
Eccentric Shaft ..................................  
Pin, Eccentric Shaft ...........................  
Spring ...............................................  
Oil Seal..............................................  
Eccentric Shaft Lever.........................  
Hex Hd. Screw, 1/4-20 x 1/2* ...........  
Ball Bearing .......................................  
Tiller Shaft (Incl. Ref. 18) ..................  
Woodruff Key, 1/4 x 1-1/4.................  
Tiller Drive Worm Gear (bronze) .......  
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
1.016 I.D. x 1.468 O.D. x .062  
Thick..............................................  
1
* Specify GRADE 5 if ordering part locally.  
A/R - As Required  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 35  
Models 664D & E666M  
BOLO TINES, WHEELS  
NOTE 1: Custom Tilling Tines are  
available for your tiller. These are  
special hard-faced tines that are  
thicker than standard tines.  
13  
13  
IMPORTANT: Left and right sides of  
tiller are determined by standing in  
operator position and facing direc-  
tion of forward travel.  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
710-3105  
Hex Hd. Screw, 3/8-16 x 1-1/4*.......... 16  
--  
--  
--  
GW-2475-1  
Custom Tilling Bolo Tine, Left hand  
tine (see Note 1 above) ...................  
Custom Tilling Bolo Tine, Right hand  
tine (see Note 1 above) ...................  
Custom Tilling Bolo Tine Replacement  
Set (Incl. eight ea. right hand and  
left hand custom tines, and sixteen  
each of Refs. 1 and 3).....................  
GW-1270-2A Bolo Tine-single. Right hand tine  
used on left side of tiller. (Incl.  
8
8
GW-2475-2  
GW-10802  
two ea. Refs. 1 and 3) .....................  
8
2
2
3
5
7
712-0375  
710-3096  
Hex Locknut, 3/8-16 ...........................  
Hex Hd. Screw, 3/8-16 x 2, Grade 8....  
GW-1270-1A Bolo Tine-single. Left hand tine  
used on right side of tiller. (Incl.  
1
two ea. Refs. 1, 9 and 10) ...............  
1902154010 Tine Holder. For left and right sides ....  
8
2
9
10  
11  
12  
13  
712-3017  
736-0169  
GW-9380  
GW-9338  
1917487  
Hex Nut, 3/8-16................................... 16  
Lock Washer, 3/8................................ 16  
8
--  
1901118  
Bolo Tine Replacement Set (Incl. eight  
ea. right hand and left hand tines,  
and sixteen ea. Refs. 1 and 3).........  
Clevis Pin, .312 x 1-3/4 ......................  
Hitch Pin .............................................  
Wheel and Tire Assembly ...................  
2
2
2
1
* Specify GRADE 5 if ordering part locally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Parts List  
Models 664D & E666M  
ROW MARKER ATTACHMENT  
(See Detail A)  
ROW MARKER ATTACHMENT OEM-290-257  
(Complete Attaches to Furrower Attachment)  
DETAIL A  
MAIN SUPPORT/YOKE ASSEMBLY  
PART # 1904522001  
BUMPER ATTACHMENT  
20  
19  
23  
22  
21  
BUMPER  
OEM-290-254  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 37  
Models 664D & E666M  
ROW MARKER ATTACHMENT & BUMPER ATTACHMENT  
REF  
No.  
PART  
No.  
REF  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
Row Marker Attachment (option) OEM-290-254  
Row Marker Main Support & Yoke Assembly Part #1904522001  
1
1904522001 Main Support & Yoke Assy–  
complete. (Incl. Ref. No.'s  
10  
1186349  
Screwhex flanged locking,  
3/8-16 x 1-1/2* .............................  
Stop Bar ............................................  
Yoke..................................................  
Tube Keysquare...............................  
Washerfriction.................................  
Main Support ....................................  
Washersquare hole..........................  
Washerdisc spring ..........................  
Nuthex 3/8-16 .................................  
1
1
1
1
2
1
1
1
1
10,11,12,13,14,15,16,17 & 18)..........  
Marker Bladeblade only...................  
1904524001 Marker Armmain arm ......................  
1904523001 Marker Armextension arm with  
stop pin .........................................  
1
1
1
11  
12  
13  
14  
15  
16  
17  
18  
GW-1593  
GW-1592  
GW-1591  
GW-1590  
GW-1588  
GW-1589  
GW-9925  
1186231  
2
3
4
GW-1594  
1
1
5
6
GW-9347  
Hitch Pin(incl. in Hardware Pkg  
GW-1837)......................................  
Thumbscrew1/4-20 x 1/2, not  
avail. sep. (see hardware pkg.  
GW-1837)......................................  
Nut Bar(incl. in hardware pkg  
GW-1837)......................................  
Nuthex, 10-24 w/attached start  
washers, not avail. sep. (see  
GW-9786  
2
1
Bumper OEM-290-254  
7
8
GW-1596  
GW-9828  
19  
20  
21  
1918749001 Bumper (includes Ref. 20) ...............  
1
1
777S30653  
710-3073  
Decal - Caution..................................  
Screwhex hd., 5/16-18 x 2-1/4*,  
not avail. separately  
hardware pkg #1837) ....................  
Screwround hd.,10-24 x 1, not  
avail. sep. (see hardware pkg  
GW-1837)......................................  
Hardware Packageincludes: one  
GW-9347 hitch pin (Ref. 5), two  
GW-9786 thumbscrews (Ref. 6),  
one GW-1596 nut bar (Ref. 7),  
two GW-9828 hex nuts (Ref. 8),  
two 1100135 screws (Ref. 9) ........  
2
2
9
1100135  
GW-1837  
(order #1918781 hardware kit) ..  
Lockwasher5/16*, not avail.  
separately (order #1918781  
hardware kit) ...............................  
Nuthex, 5/16-18*, not avail.  
separately (order #1918781  
hardware kit) ...............................  
Hardware Kit: Incl. four each of  
Refs. 21, 22 and 23 .......................  
4
4
22  
23  
---  
736-0119  
712-0267  
1918781  
---  
4
1
1
Note: Common hardware listed above as not available separatelycan be found at  
most hardware stores.  
* Specify GRADE 5 if ordering part locally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Parts List  
Models 664D & E666M  
HOOD, BRACKET and DEPTH REGULATOR  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
1917605  
Tine Hood (Incl. hood flap and  
11  
12  
13  
14  
15  
16  
17  
18  
GW-9120  
GW-9119  
710-3005  
GW-1113-1  
712-0798  
GW-20775  
777S30649  
GW-9553  
Retaining Ring (tolerance ring)...........  
Knob, Depth Regulator (Incl. Ref. 11).  
Hex Hd. Screw, 3/8-16 x 1-1/4*..........  
Bushing, Drag Bar...............................  
Hex Nut, 3/8-16...................................  
Drag Bar .............................................  
Decal, operating instructions ..............  
Hex Hd. Screw, self-tapping,  
1
1
2
2
2
1
1
Ref.17)............................................  
Lockwasher, 3/8..................................  
Brackethood & depth regulator  
1
2
2
3
710-0169  
GW-2527  
(Incl. Ref. No. 9).............................  
Hex Flange Screw, 5/16-18 x 5/8* ......  
Hex Locknut, 1/4-20 ...........................  
Hex Hd. Screw, 1/4-20 x 1* ................  
Spring .................................................  
Spacer.................................................  
Roll Pin (spiral), 1/4 x 1 .....................  
Depth Adjustment Bar Assembly  
1
2
1
1
1
1
1
4
5
6
7
8
9
10  
1186328  
712-0291  
710-0597  
GW-9384  
GW-9534  
1185469  
GW-1117A  
5/16-18 x 1/2* ................................  
Hex Flange Screw, self-tapping,  
1/4-20 x 1/2* ..................................  
2
2
19  
710-0599  
(Incl. Refs. 11 and 12) ....................  
1
* Specify GRADE 5 if ordering part locally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 39  
Models 664D & E666M  
HILLER/FURROWER ATTACHMENT  
HILLER/FURROWER OEM-290-251  
(Viewed from front of tiller)  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
3
4
5
6
7
8
1900771001 Furrower Blade..................................  
1
4
4
4
4
1
1
1
9
10  
11  
12  
GW-9725  
1100243  
1186231  
GW-9318  
Carriage Bolt, 3/8-16 x 1-1/2.............  
Lockwasher, 3/8, plated ....................  
Hex Nut, 3/8-16, plated .....................  
Clinch Pin..........................................  
2
2
2
1
1186098  
1177548  
GW-9902  
GW-9824  
Carriage Bolt, 5/16-18 x 3/4 ..............  
Star Washer, External Tooth, 5/16.....  
Plain Washer, 5/16 S.A.E...................  
Wing Nut, 5/16-18.............................  
1900773001 Hiller Wing, left..................................  
1900774001 Hiller Wing, right ...............................  
1900772001 Blade Mounting Bracket ....................  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Parts List  
Model E666M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List 41  
Model E666M  
ELECTRIC START ASSEMBLY  
REF.  
No.  
PART  
No.  
REF.  
No.  
PART  
No.  
DESCRIPTION  
QTY.  
DESCRIPTION  
QTY.  
1
2
3
4
5
1186073  
1186211  
1186390  
1186389  
1901202  
Carriage Screw, 1/4-20 x 1.25...........  
Hex Nut, 5/16-24...............................  
Flange Screw, 1/4-20 x .625..............  
Hex Locknut, 1/4-20..........................  
Cable (ground wire to starter  
motor bracket)...............................  
Recharge Wire Assembly ..................  
Wire Harness Assy. (available as  
complete assembly only). Incl.  
wire assy. w/connector to large  
solenoid stud (red wire); wire  
2
2
2
2
8
9
1917262  
686-04024  
710-0599  
712-3006  
725-0157  
725-0267  
725-1706  
736-0119  
736-0147  
736-0607  
GW-2614  
96510  
Ground Wire Assy. (shut off) ............  
Battery Bracket Assembly, Pony........  
Self-tapping Screw, 1/4-20 x .5.........  
Hex Nut, 1/4-20.................................  
Cable Tie............................................  
Ignition Switch ..................................  
Battery, 270 CCA...............................  
Lock Washer 5/16 .............................  
Lock Washer, #10 .............................  
External Lock Washer, 5/16...............  
Keyswitch Clamp...............................  
Cable (solenoid to starter motor) ......  
Solenoid (Incl. nuts and washers  
1
1
3
2
1
1
1
2
1
2
1
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
2
1
6
7
1901894  
1908118  
assy. w/connector to small  
solenoid stud (red wire); wire  
96514  
assy. w/connector to solenoid  
grounding screw (red wire); wire  
assy w/connector to engine ground  
shut-off (green wire); plastic  
for cables and wires).....................  
Boot, Insulating.................................  
Hex Locknut, #10-32.........................  
Label, Ignition Switch........................  
1
2
1
1
21  
22  
97020  
9853  
777S30648  
protector tube; wire terminal .........  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toro Sprinkler 860S User Manual
Toshiba TV VCR Combo MV13P2 User Manual
Toyota Car Stereo System 86120 YZA59 User Manual
Tripp Lite Automobile Accessories SR25UBEXPKD User Manual
UNICOM Electric Switch 8F User Manual
Vinotemp Refrigerator Portofino User Manual
Vision Fitness Bicycle ET X6200HRT User Manual
Vizio Car Satellite TV System E241 A1 User Manual
Wacom Tablet DTI 520 User Manual
Weber Burner 42376 User Manual