Pairing the AX Micro
Basic Handsfree Operations for the AX Micro
Product Specifications
Product Warranty
Disclaimer Notice
The manufacturer shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing,
performance or use of this material. This document contains proprietary
information, which is protected by international patent applications and
copyright. All rights reserved. No part of this document may be copied,
reproduced or translated without prior written consent of the manufacturer.
The manufacturer reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation to
notify any person of such revisions or changes. The manufacturer also
reserves the right to change the specifications without notice.
Tritton Technologies warrants this product against all defects in
material and workmanship for a period of one year from the date of
purchase by end user.The conditions for warranty are as follows :
Answer Call
End Call
Long click Multi-Function Button during ‘Talk Mode’.
Pairing mode lasts for 3 minutes, after this period the AX Micro
returns to standby mode.
Bluetooth Specification V2.0
2402 ~ 2480 MHz
Headset, Handsfree V1.5
0.25 ~ 2.5mW (Class 2)
10m (in open space)
Li-Ion Polymer
Standards
An alert sound will output from both phone and headset.
Short click Multi-Function Button to answer call.
TRI-BH200
Rev 1.0
RF Frequency Range
Profiles Supported
Transmission Power
Distance
NOTE: If the other party ends the call first, the AX Micro will
automatically return to standby mode.
If the AX Micro is on, turn it OFF
Make Call
The warranty is valid only if the original receipt issued to the
original purchaser by the dealer is presented with the product
to be repaired or replaced.
The warranty is void if the serial number, date of purchase and
product label had been removed.
The warranty does not cover any failure or damage of the
product due to normal wear and tear, physical abuse, improper
installation, misuse, modification or repairs by unauthorized
third parties.
Tritton Technologies does not assume responsibility for any loss
or damage incurred during shipment and as a result of force of
nature.
Click and hold the Multi-function Button until LED status
indicator light starts flashing red and blue (appx 7 seconds).
If prompted for a pin number to establish a connection on the
paired Bluetooth device, enter 0000.
Dial and place a call from phone and automatically be transferred
to headset.
Reject Call
Long click Multi-Function Button while phone is ringing.
Battery Type
Short click Multi-Function Button to switch the call to the headset.
NOTE: Some phones will automatically transfer call.
European CE notice to users and product statements
This product is
C
E
marked according to the provisions of the
R
& TTE
Standby > 150 hrs,
Voice Connection : 4 hrs
< 3 hrs
Battery Life
When connected, the AX Micro LED status indicator light will
turn off.
Call Transfer
Directive (99/5/EC). Hereby, Tritton Technologies Co., Ltd, declares that this
product is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. For further information, please contact
Short click Multi-Function Button during ‘Talk Mode’ to transfer
Redial
call from headset to phone or vise versa.
Double click Multi-Function Button when in idle state
NOTE: Double click on some phones will display the number last
called or received. In this case, double click Multi-Function Button
again to redial.
Charging Time
Weight
Wearing the AX Micro
9.5g
Call Waiting
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is
subject to the following two conditions; (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
-10 ~ +50°C,
Long click Multi-Function Button during ‘Talk Mode’ to answer
The AX Micro can be worn on the left or right ear. When the
headset is not in use, you can clip the headset onto the lanyard for
convenience and portability.
Operating Temp.
& Humidity
Certification
an incoming call.
Rel. Humidity 0 ~ 95%
BQB, FCC, CE
Voice Dial
Tritton Technologies is not liable for any incidental or
consequential damages arising from the use or misuse of the
product.
Short click Multi-Function Button twice to switch between calls.
NOTE:This function can only be used if user has subscribed for
such services.
Make sure your phone supports voice dialing, that it is activated
and the voice tags have been recorded if needed.
Long-click Multi-Function Button when in idle state.
Follow the instruction message from phone to complete
voice dialing.
Select one of the two rubber grippers that fits most comfortable
and securely.
All warranty claims are limited to repair or replacement of the
defective product at the sole discretion of Tritton Technologies.
If Tritton Technologies repairs or replaces the product, the
repaired or replaced product shall be warranted for the
remaining time of the original warranty period. Repair or
replacement may involve the use of functionally equivalent
reconditioned units. Replaced part or product becomes the
property of Tritton Technologies.
Microphone Mute
Place the headset in the ear so that the rubber grippers hold the
headset snugly against the ear wall.
WEEE Directive 2002/96/EC Art. 11(2)
Long click the (+) and (-) buttons simultaneously during ‘Talk
Mode’if you do not want to mute your voice for privacy .
Long click the (+) and (-) buttons simultaneously to cancel
mute function.
The use of the symbol indicates that this product may not be
treated as household waste. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product.For more detailed information about recycling of this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
Double click Multi-Function Button once.
Volume Control
Short click (+) or (-) to adjust volume during handsfree mode.
NOTE: Beep tones will be heard at maximum or minimum volume.
Reconnect
Short click Multi-Function Button twice to reconnect headset
with phone
Consumable components, such as batteries, are not included in
the warranty obligation.
8
9
10
11
12
13
CONTENTS
Introduction
Safety Instructions
Product Features
Package Contents
Description of Parts
! Improper battery charging can shorten usage times !
Introduction..........................................................................................................2
Safety Instructions..............................................................................................3
Product Features..................................................................................................4
Package Contents................................................................................................5
Description of Parts............................................................................................6
Charging the AX Micro Battery........................................................................7
Switching the TRI-BH200 ON/OFF..................................................................7
Pairing the AX Micro ..........................................................................................8
Wearing the AX Micro.........................................................................................8
Basic Handsfree Operations for the AX Micro............................................9
Product Specifications....................................................................................11
Product Warranty..............................................................................................12
Thank you for purchasing the Tritton Bluetooth Headset TRI-BH200,
the AX Micro.The AX Micro is a high-tech wireless headset for
handsfree operations at its best.The AX Micro can be connected to
any Bluetooth device that supports either headset or handsfree
Bluetooth profiles.The AX Micro features a revolutionary finger-like
rubber gripping mechanism that holds the headset firmly against
the auricle (Outer flap of the ear, also called the pinna), making it
convenient to wear and comfortable even when used for extended
hours. Additionally, the symmetrical design is one that can be
easily switched from one ear to the other
Know the law: Make sure to check to local laws and regulations
on the use of mobile phones and handsfree equipment in the
areas you intend to use them.
Bluetooth V1.2, 2.0 compliant
1. Tritton Bluetooth Headset TRI-BH200, AX Micro
2. Charger Cradle
3. AC/DC Charger Adapter
4. Rubber Grippers (2 sizes)
5. Lanyard and clip
Charge the battery for at least 2.5 hours prior to first use.
During charging the headset LED status indicator light will
be red.
Supports headset and handsfree profiles for hands free function
with Bluetooth phones
Multi-Function Button
Extended use of headset devices at high volume levels may
cause hearing damage.
Unique finger-like rubber grippers to secure the headset on
your ear
When fully charged, the headset LED status indicator light will
be blue.
When cleaning the device, do not use any type of scouring pad,
abrasive powder or solvents as these may permanently dull the
finish.
High performance built-in speaker and microphone
Red and blue LED status indicator light
6. User Manual
To connect charger
Volume Down (-)
Volume Up (+)
1. Connect the charger cradle with the AC/DC Adapter.
2. Plug cord into power supply
More than 4 hours of talk time and 150 hours of standby time
Convenient charging via cradle using standard Mini-USB
(not provided) or AC/DC Adapter
Charge the battery for at least 2 hours before first use.
Do not use in prohibited areas such as hospitals or on airplanes.
Do not expose components to extreme temperatures,
prolonged sunlight, moisture or vibrations.
1
2
3
6
3. Mount headset onto cradle
Keep headset and charger cradle away from reach of children.
Do not place metal objects, such as coins or jewelry, on charger
cradle contacts.This may cause a short circuit with the risk of
fire or explosion.
4
5
LED status indicator light
To Turn ON: Click and hold the Multi-Function Button until the
LED status indicator light turns blue and periodically flashes.
To Turn OFF: Click and hold the Multi-Function Button until the
LED status indicator light turns red and then off.
technologies
Many of the buttons perform multiple tasks, based upon if they are tapped, or held down.
We call this“Short Click”and“Long Click”respectively throughout the manual.
Phone Support: 800-431-1176
Email Support: [email protected]
1
2
3
4
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|