Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to CoPilot!
Imagine…a CoPilot at your side that always
GPS Accuracy
knows where you are, where you’re going, and
exactly how to get there. Now confidently drive
anywhere while CoPilot, using the latest, most
accurate GPS technology, shows you all the correct
turns to take to reach your destination.
The GPS signal CoPilot receives from the constellation of satellites has a
rated accuracy of within 5 - 10 meters. This means that 95% of the time
the reported location is within 15 - 30 feet of your exact position. If
CoPilot initially places you on the wrong road (this happens only rarely),
keep driving and CoPilot will automatically correct itself and find your
proper position.
Better yet, if you should miss a turn, encounter heavy
traffic, or simply decide to go a different way, CoPilot’s dynamic directions
automatically provide you with an updated route to your destination. Keep
your eyes on the road and your hands on the wheel as CoPilot’s unique
voice technology speaks the directions to you. In addition, detailed street
maps show your passengers the current street location and the route to
your destination.
Occasionally, CoPilot’s GPS tracking will be less accurate or fail to work
at all because your GPS receiver is unable to receive satellite signals.
Heavy foliage, tall buildings, or any other structures obstructing
communications will interfere with CoPilot’s ability to track your loca-
tion. Like your car radio, GPS tracking can also be affected by weather
conditions if severe. CoPilot will continue tracking as soon as adequate
signals are available. Despite these limitations, you can expect CoPilot
to provide you with useable and accurate information most of the time.
CoPilot will alert you if accurate information is unavailable.
About GPS Technology
The Global Positioning System (GPS), developed by the U.S. Department
of Defense, is a constellation of 24 satellites that orbit the Earth twice daily.
Each satellite contains an atomic clock that is accurate to the nanosecond
and constantly emitts radio waves toward Earth. GPS sensors (hardware
devices for receiving data) can receive these signals from the satellites and,
using their own internal clock, can calculate the amount of time it has taken
for the signal to be received. GPS relies on the fact that radio waves travel
at the speed of light to calculate distances, and the exact location of the
sensor is figured by combining the data received from four satellites.
CoPilot’s personal, portable GPS navigation system gives you the
freedom to explore and the confidence that you’ll never get lost again!
Safety Warning
Always keep your hands on the steering wheel and eyes on the
road when driving!
Do not use this product in any way that interferes with safe and
attentive operation of a vehicle. When used in a vehicle, do not place
the GPS receiver, antenna, power supply, or your computer where it
may strike the driver or passengers if the vehicle turns sharply or stops
abruptly. This product is designed, manufactured, and intended as an aid
to planning and navigating routes. The accuracy of the map data, driving
directions, and GPS tracking system is insufficient for this product to be
used for automated navigation or in any situ0(er gedabe )re wito wue
unit fail to7coul9.9eraffuni ws peu0(j.2(-3uppl)10(y)80(,)10ph15.2ysutomto wue )]
Using the data from these four satellites, GPS is able to give you the latitude,
longitude and elevation of your present location, and also your road speed
and direction of travel on a route. Given the right conditions, a GPS sensor
can identify your geographic position anywhere in the world within a few
meters.
How CoPilot Uses GPS
CoPilot uses the GPS positional data that it receives from your hardware
unit to display your current position on a map as you drive. This is called
“tracking”. CoPilot also uses the GPS data it receives to guide you along
a planned route if you enter a destination on your Smartphone. CoPilot
guides you with audible prompts and on-screen directions as you drive.
- 1 -
Hardware Setup
Getting Started
WARNING: Never leave your Smartphone or GPS receiver in a closed
o
vehicle that exceeds 140 F.
Requirements
Configuring the Bluetooth GPS Receiver:
This User’s Guide includes complete instructions for installing your
CoPilot software, downloading map data to the Smartphone, and using
CoPilot on your Smartphone to guide you to your destination or to
plan trips.
Once you have installed CoPilot Live on your phone, you will be prompted
to set up your remote Bluetooth GPS receiver from the GPS Status screen.
CoPilot uses the Bluetooth GPS receiver to enable you to obtain a GPS fix
for CoPilot to calculate your route and provide navigation guidance.
The steps you need to take to get up and running with CoPilot:
IMPORTANT NOTE: Please ensure that the correct date and GMT
time are set on your phone before commencing with setting up your
Bluetooth GPS receiver.
Connect your Smartphone to your desktop/laptop (not
necessary if a Quickstart installation memory card was included
with your purchase).
1. Switch on your Bluetooth GPS receiver (slide the switch to 1). Green
and blue lights should turn on if the GPS receiver is properly charged
(see Troubleshooting, next page, on proper charging).
Install CoPilot to your desktop and Smartphone using the
Product Key found on the printed CoPilot Quick Start or on
the supplied Product Key card.
2. Open CoPilot. CoPilot will now check whether
Bluetooth is switched on. If not, select Menu >
Turn On Bluetooth.
On your desktop, create a map data region and download it to
your Smartphone (not necessary if a Quickstart installation memory
card was included with your purchase).
3. Search for your GPS receiver. Select Menu >
Search for GPS. After a few minutes the
system should display a list of Bluetooth devices.
Your Bluetooth receiver will be identified by a
code BTGPS xxxxx .
Activate CoPilot on your Smartphone.
Enter an address and start driving!
Desktop PC Requirements
4. Highlight the GPS receiver and press SELECT.
The GPS screen should now change to ´GPS Signal: Found´ and
the GPS information displayed.
To install CoPilot on your desktop or laptop PC, you must have:
• MicrosoftWindows 2000, ME, or XP
• 400 MHz processor or better
5. Select Done. Now you can enter a destination and start navigating!
LED STATUS LIGHTS:
• 16X CD-ROM or better
Blue LED Light indicates the Bluetooth connection status.
Flashing every 1 second: GPS was just powered on and waiting for a
connection. Flashing every 2 seconds: GPS is connected to phone.
• 128 MB of RAM and a hard drive with 1 GB of available disk space
for map data
• Microsoft ActiveSync version 3.1 or later
Green LED Light indicates GPS status.
Light Constantly on: GPS was just powered on and attempting to acquire a
GPS position. Light is Flashing: GPS has acquired a GPS position.
Smartphone and GPS Requirements
• Windows Mobile 2003 orWindows Mobile 5
• Bluetooth GPS receiver or built-in GPS
Orange/Red LED Light indicates Battery status.
Red Light Constantly on: Battery is Low. Orange Light is Constantly on:
Battery is charging. No Light (off): Battery is fully charged.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
GPSTroubleshooting:
Connecting Your Smartphone
1. Unable to switch on Bluetooth
NOTE: If a Quickstart installation memory card was included with
a. Close CoPilot by selecting ‘Exit’ from the menu.
b. Switch your phone off and then on again using the power button.
c. Restart CoPilot, and select GPS from the CoPilot Welcome
screen.
d. Select Menu |Turn on Bluetooth.
e. Bluetooth should now be switched ON.
your purchase of CoPilot, you do not need to do this.
In order to successfully transfer data from your desktop to your
Smartphone, you must have Microsoft ActiveSync 3.1 (or later) installed.
This software is necessary to connect the two machines and is provided
by your Smartphone manufacturer. If you did not receive this software
with your mobile device, contact the distributor immediately.
1. When connecting your Smartphone,
if you have not set up a partnership
between your Smartphone and your
desktop, you will be prompted to do so.
This is not required. If you choose not
to set up a partnership, select Guest
partnership, and you will be logged in
as a Guest and ready to transfer data
between machines.
2. Proper ChargingTechniques (IMPORTANT)
The Bluetooth GPS only needs to be charge for a maximum of 1
hour or until the Battery LED is off. Do not leave the Bluetooth
GPS receiver connected to the charger at all times, as it will degrade
the battery life and eventually drain the battery completely. Normal
battery life is 8 hours.
3. ‘No devices found’ in search for GPS
a. Close CoPilot by selecting ‘Exit’ from the menu.
b. Ensure that your Bluetooth GPS receiver is switched ON: Switch
the GPS receiver off and on. The green and blue lights will turn
on if the GPS receiver is charged up and working properly.
c. Restart CoPilot and select GPS from the CoPilotWelcome
screen.
2. If you have set up a partnership in
the past, or choose to do so at this
point, be sure to allow your Smartphone
to synchronize with your desktop or
laptop prior to launching CoPilot.
d. Select Menu | Search for GPS.
e. Your Bluetooth receiver should appear with the name
‘BTGPS xxxx xxxx’.
4. Unable to get a GPS Fix.
If you can’t get a GPS signal after setting up your receiver, ensure
that your Bluetooth GPS receiver is switched on, charged up, and
working properly by switching it on and off. The green and blue
lights will turn on if the GPS receiver is properly charged. To avoid
unnecessary delays, make sure that your phone’s date and time are
properly set.
NOTE: If your desktop/laptop computer
does not seem to be recognizing the
connection with your Smartphone,
select Connection Settings... from the
drop-down File menu, and make sure
you’re connected using the appropriate
Port. Then click Get Connected... in
the File menu and follow the on-screen
instructions.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing CoPilot
Installing From a Quickstart Installation Memory Card:
Installing From CD’s:
1. Set up your phone and charge the battery following the
instructions in your phone’s manual.
Your desktop/laptop and Smartphone should both be turned on. The
cradle/cable for your mobile device must be connected to your desktop
through either a USB or Serial port. Your Smartphone should be
connected to your desktop via ActiveSync (see p. 3).
2. You must set the correct date and GMT time on your phone for
optimal GPS functionality.
3. Your CoPilot Live satellite navigation software is supplied pre-
loaded on a storage card. Insert your CoPilot storage card into
the slot of your phone.
Installation Steps:
Step 1: Insert the CoPilot Install Disc into your CD-ROM drive. After
a few seconds, the InstallationWizard will open. Follow the
instructions, entering your Installation Product Key when
prompted. This Product Key can be found on the back cover
of your printed CoPilot Quick Start Guide or on the supplied
Product Key card.
4. Once the CoPilot storage card is inserted, CoPilot will install
automatically. See the instructions below for what to do if
installation does not begin automatically.
5. You will be prompted to choose a location for ‘CoPilot
Smartphone’. Select ‘phone’ from the pick list and press
‘Done’.
The CoPilot application will be installed to your desktop PC
and to your Smartphone separately. The Smartphone installation
will ask if the default location (the device’s storage memory) is
where you want the application to be placed.
6. You will see ‘copilotsp2003.cab’ being installed. Once
completed, the message ‘CoPilot.SP2003.CAB was
successfully installed on your device’ will be displayed.
Select ‘OK’.
Step 2: When the installation is complete, a CoPilot icon will appear on
your desktop. Click Finish to close the InstallationWizard.
7. Installation is now complete and you will be returned to your
phone’s Home screen. Press Start | More | CoPilot to launch
CoPilot.
Step 3: The first time you open CoPilot on your Smartphone, you will
be asked to activate the product.
NOTE: You may receive a message that states “Application came
from an Unknown Source. Would you like to install anyway?”
Click “Yes” to this message to install CoPilot.
Product Key Entry and Activation
The first time you launch CoPilot on your phone you will be prompted
for your product key. You can find this key on the back cover of your
printed CoPilot Quick Start Guide. Input the product key carefully. and
press Done.
If Installation Does Not Start Automatically:
1. From your phone’s Home screen select Start | Accessories |
File Manager.
TIP: It is recommended that you switch offT9 predictive text entry
when inputting your product key.
2. Select the Storage Card folder and then the 2577 folder.
3. Scroll down the page and select AUTORUN.EXE —
installation should now begin.
You will now be asked to activate your CoPilot license within 3 days.
Select one of the three methods below to activate your CoPilot license.
Alternatively, press Menu followed by Later if you would prefer to
activate afterwards at your convenience, within the next 3 days.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ThreeWays to Activate:
f. Once complete, you will see the message ‘license activated
successfully’. Select Done.
1. Recommended: Automatic Activation using your phone’s
Wireless Internet Connection
g. (If installing a Europe region upgrade) You must now confirm the
map region that you wish to activate. ‘United States’ should be
displayed. Select ‘Done’.
a. Select the ACTIVATE soft key.
b. Select MENU then AUTOMATIC.
h. (If installing a Europe region upgrade) You will be reminded that
‘Your region cannot be changed once it is selected’. Select
Done.
c. Enter your e-mail address and press NEXT. CoPilot will now
activate over the Internet.
d. Once complete, you will see the message ‘license activated
i. Activation is now completed.
successfully’. Select Done.
e. (If installing a Europe region upgrade) You will now be asked to
confirm the map region that you wish to activate. ‘United States’
should be displayed. Select Done.
Changing the Voice Option at Any Time
CoPilot offers one or both of the following voice options, depending on
your selected language:
f. (If installing a Europe region upgrade) You will be reminded that ‘Your
region cannot be changed
• Male Pre-Recorded Sound Files
• Female Pre-Recorded Sound Files
once it is selected’. Select Done.
g. Activation is now completed.
To change the voice option:
1. Open CoPilot.
2. Automatic Activation via an Internet-connected Desktop PC
or Laptop
2. In the Welcome screen select the Options icon; or in the Going
To screen or guidance screen press the Menu soft key and select
Options.
Connect your Smartphone to an Internet-enabled Desktop or
Laptop using the supplied Synchronisation cable, and Microsoft
ActiveSync software on your desktop PC or Laptop. Make sure your
desktop/laptop is connected to the Internet, then follow the steps
outlined above.
3. Select Language & Speech from the Options menu.
4. Under Language use the right or left key to open a pick list of
languages and change your language setting.
3. Manual Activation (requires an Internet-connected computer)
a. Select the ACTIVATE soft key.
5. Under Voice use the right or left key to toggle between Male and
Female.
b. On the following screen select MENU | MANUAL.
6. To hear your selection before exiting this screen, press Test.
c. On the next screen you’ll see your Product Key and License ID.
You need this information to manually activate CoPilot as follows:
7. When finished, press Done.
com and enter the information. You will be given an activation
code.
e. Enter the activation code into the phone when prompted and
select Next.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Map Download to Your Smartphone
(3) Download the Data:
NOTE: If your CoPilot product came with a Quickstart installation
memory card, you don’t need to download map data (it’s already on your
Quickstart card). You can skip to Using CoPilot for Guidance, p. 14.
(3a) Using a Storage Card Reader:
1. Make sure the Storage Card for your Smartphone is inserted in the
Storage Card Reader.
To download map data from your Desktop PC or Laptop to your mobile
device, you select the data to download from one or more regions that you
specify in the CoPilot application on your desktop. It’s a simple process.
2. Clicking the Download icon will take you to a screen
where Available Area(s) for download are displayed on the left.
To designate an area to include in the download, highlight it
and then click on the right arrow button to move it to the
Data Included inThis Download list on the right. To take an area
off the list, highlight it and click the left arrow button.
CoPilot gives you two options for downloading data:
· Download directly to your Storage Card Reader — follow steps (1),
(2), and (3a) below.
· Download to a hard drive on your computer, then manually copy the
data to your Smartphone Storage Card using ActiveSync — follow
steps (1), (2), and (3b) below.
3. After confirming that the area(s) you would like to download are in
the Data Included inThis Download list, click Download to complete the
map data download process (see Data Download, p. 10).
(1) Choose a Storage Location:
4. Remove the Storage Card from the Storage Card Reader and insert
it into the Smartphone. Your data is now ready to be used by CoPilot.
1. Open the CoPilot application on
your desktop/laptop, then click the
Data DownloadWizard icon
(3b) Using ActiveSync:
1. Ensure that your Smartphone is connected to the desktop/laptop via
ActiveSync.
in the sidebar on the left. Make sure your
Smartphone is synchronized. CoPilot will
scan your computer to detect which drive
options are available.
2. Clicking the Download icon will take you to a screen
where Available Area(s) for download are displayed on the left.
To designate an area to include in the download, highlight it
and then click on the right arrow button to move it to the
Data Included inThis Download list on the right. To take an area
off the list, highlight it and click the left arrow button.
2. Click on the Drive Name pick list that appears and select either the
drive letter of your Storage Card Reader (if you are using one) or the drive
letter of your Hard Drive (e.g. C). Click Next.
(2) Select a Data Area:
3. After confirming that the area(s) you would like to download are in
the Data Included inThis Download list, click Download to complete the
map data download process (see Data Download, p. 10).
Select a data area using one of three methods (see Selecting a Data Area
p. 7-9 for a description of each method):
4. On the desktop, double click the My Computer icon. Navigate to
the drive letter you downloaded the data to.The data you downloaded
will be in a folder named “CoPilot”. For example, if you had chosen
Drive C, the data would be in the folder “C:\CoPilot\”.
City Radius to select an area around a town or city;
Map Area to select an area directly from the map;
Trip to select a corridor along a route between two places.
Region to select a whole country or region.
5. Copy the CoPilot folder by right clicking on it and selecting Copy.
6. Open ActiveSync and click on the Explore icon. Navigate to the
Smartphone’s Storage Card. Use the menu option Edit > Paste to
copy the folder to your Smartphone’s Storage Card.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Data Area
City Radius
This method allows you to quickly select data in the shape of a circle
surrounding any city on the map. In the Data DownloadWizard you
type a city name and state abbreviation or ZIP code and enter the
number of miles/kilometers you would like the radius to extend around
the city, then click Next.
TheWizard displays a map that shows the city and the radius you chose.
At this point you can zoom the map in and out using zoom buttons and
adjust the size of the data area by altering the radius of the circle.
1. Click the City Radius icon in
the Data DownloadWizard.
After you specify a location where the data will be stored, you will be
prompted to select a region on the map to download. CoPilot provides
several ways to select a data region, described on p. 7-9 below.
Region
2. Enter a City, State or ZIP
code, and a mile radius around
the area that you would like to
download. Click Next to verify
that the area is correct.
To download a whole country or CoPilot data region, click the Region
option in the Data DownloadWizard, then select a region in the next
screen and click Next.
The country or region you select must be included in the region that was
installed on your Smartphone (if not, a warning will appear and you won’t
be able to proceed with the download). Region downloads generally take
the longest amount of time, depending on the size of the selected region.
3. Using the Data Download
Wizard toolbar you can zoom
in or out, change the radius, or
go back to the previous screen.
When you are satisfied with
your selection, click Next.
Note: CoPilot’s available
memory calculations subtract
a certain amount from the
available memory on your
storage card (if you are using
one) to account for support files.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Name the selection, then
click Next.
2. Enter a City, State or ZIP
code (address optional) within
the area that you would like to
download. Click Next.
5. You will return to the Data
Selection menu where you can
select another data area if you
like, using any method. When
you finish selecting data areas,
click the Download icon and
you will be taken to the final
screen where you can build
your download.
3. Click and hold the left
mouse button and drag the
cursor to draw a box around
a desired area. The size of the
area will be displayed in the
toolbar. Click Next.
Map Area
Note: CoPilot’s available
memory calculations subtract
a certain amount from the
available memory on your
storage card (if you are using
one) to account for support
files.
This method of selecting data allows you to choose an area of data by
drawing a box on the Data DownloadWizard’s map screen.
In theWizard, you enter a city name near which you would like to select
data, then click Next. The map will zoom to that location. Then you
create a box around the desired area by clicking and dragging your mouse
across the map. The street-level data within that box will be selected.
You can zoom the map in and out using the zoom buttons and adjust the
size of the data area by redrawing the box.
4. Name the selection, then
click Next.
Follow these steps to download Map Area data:
1. Click the Map Area icon in
the Data DownloadWizard.
5. You will return to the Data
Selection menu where you can
select another data area if you
like, using any method. When
you finish selecting data areas,
click the Download icon and
you will be taken to the final
screen where you can build
your download.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip
This method of selecting data is by far the most customizable method.
It allows you to run a trip and select street-level data specific to that trip,
thereby avoiding unneeded data and saving valuable memory space.
3. To search for a POI, click
the Points of Interest tab, enter a
City, State or a ZIP Code and
click the Find button.
Once the trip is run, the Data DownloadWizard automatically selects
circles of data around your origin and destination, and a corridor of data
along your route. You can then click Options to adjust the radius of the
circles and the width of the corridor.
(You can speed up your search
by selecting a POI Category
and/or Type.) Then highlight
a selection on the list, click
Select, then Add Stop to add
the POI as a stop.
TheTrip Itinerary for each trip you download will be stored on your
Smartphone (see TripTransfer, p. 11). Multiple trips can be downloaded
to the Smartphone for later use.
Note: For a more detailed
description of trip entry, open
CoPilot Help from the desktop
application (Help menu > Help
Contents and Search).
Follow these steps to downloadTrip data:
1. Click the Trip icon in the
Data DownloadWizard.
4. When all your stops have
been entered, click Select
Data.
2. Enter at least a start and
end place for your trip. In the
Cities and Addresses tab, type
a City, State or ZIP Code
and press <Enter>. Optionally,
you can enter an address in
the same way. Click the Add
Stop button to add this place
to your trip.
By default a 20 mile (32
kilometer) radius around
all stops and a width of 4
miles along the corridor
which connects them will be
highlighted. Note: CoPilot’s
available memory calculations
subtract a certain amount from
the available memory on your
storage card (If you are using
one) to account for support
files.
You may enter one or multiple
destinations. Use the buttons
to the right of the Itinerary to
zoom to a stop on the map,
change the order of stops, or
delete a stop.
5. To customize these distances
for any trip, click Options
and type a distance in the
appropriate box.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Check Include US Highway Network to download CoPilot’s complete
United States Highway Network along with your data. This additional
download requires approximately 59 MB of space on your Smartphone.
When this network is loaded, major roads, cities, and some points of interest
outside your selected data region will be shown on the map and you’ll be
able to receive guidance as you drive anywhere in the European Union.
6. You will return to the Data
Selection menu where you can
select another data area if you
like, using any method. When
you finish selecting data areas,
click Download. Trip itineraries
that were created using the
Trip download method will be
transferred along with map data
(see p. 11 for details).
Check Download Favorites to download your Favorites list from theTrip
Planner window on your desktop along with map data. These addresses will
then be available as Favorites for trip entry on the Smartphone.
RECOMMENDED OPTION: It is recommended that you leave Create
QuickStart checked (see below for a description of this feature), but you
may uncheck it if you don’t want the QuickStart copied with your download.
Data Download
When you’re ready to execute a download, theWizard will display a list
of Available Area(s) for download on the left side of the window. To
designate an area to include, click on it and then click on the right arrow
button to move it to the Data Included inThis Download list. If you
need to move an area off the Included list, click on it and use the left arrow
button.
CoPilot QuickStart Application Download
Each time you download data, CoPilot gives you the option to download
a complete, ready-to-use “QuickStart” version of CoPilot along with the
data. Having the QuickStart version on your mobile device ensures that
CoPilot will be available even if you experience technical problems with your
Smartphone and need to perform a hard reset. (During a hard reset, all
installed applications are deleted from the Smartphone.) The QuickStart
version will automatically install CoPilot after a hard reset, and
your map data will already be there!
To run the QuickStart application on your mobile device after a hard
reset, simply turn on your Smartphone. CoPilot will automatically begin
installation.
The QuickStart option can be turned on or off in the final step of the download
process (see above). By default this option is active and the QuickStart
download will be executed each time you download map data.
To delete an area from memory, click on it and click Delete.
Notice that the amount of available map memory and the memory
required for all the areas on the Included list is shown beneath the list.
NOTE: CoPilot’s available memory calculations subtract a certain amount
from your storage card (if you are using one) to account for support files.
The QuickStart needs 10 MB of space on your Storage Card. Once the
QuickStart has been copied, you can save time the next time you download
data by unchecking the Create QuickStart option in the final Data
DownloadWizard screen before proceeding to download. You will also want
to uncheck this option if you do not have enough room on your Storage Card
for it.
IMPORTANT: Each data download overwrites the data that is
already on your Smartphone. If any data areas are already loaded
on your Smartphone, they will be overwritten by the new download.
Therefore, your download must include all areas that you wish to have
available on your Smartphone.
If the QuickStart is copied onto your Storage Card and you need to remove
it, simply delete the folder that contains it. The folder will be named “2577”.
NOTE: CoPilot will need to be activated within 3 days after installation.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
POI Download Options
When you download a data region from your desktop PC, you get all roads
within that region. Also included are regional points of interest (POI) such
as gas stations, hotels, restaurants, visitor attractions, etc.
Adding OV2 POI Sets
CoPilot supports OV2 POI files. You can copy any OV2 file into the
CoPilot\Save folder on your storage card to get immediate access to the
POIs it contains.
CoPilot now lets you control the number and types of POI that get
downloaded along with map data. You can save space on your Smartphone
by eliminating categories of POI that you’re not interested in seeing.
EXAMPLE: Copy an OV2 file named ‘Speedcams’ to Storage Card\
CoPilot\Save. The next time you do a POI search you will see ‘Speedcams’
as a POIType in the Custom Category.
To select which POI categories you want, choose POI Download
Options from the Edit menu in the desktop application or, when you
first open the Data DownloadWizard, click the Options button in the
Wizard. Check the categories you wish to select (click the plus sign next
to each category to see the included sub-categories).
Trip Transfer
When you use the Trip download option, CoPilot transfers whole trips to
your Smartphone. The trip you create, including its itinerary, is transferred
along with the surrounding data corridor, and it becomes the current trip.
Click Save Settings to save the set of categories you create. Click
Restore Default to return to CoPilot’s default categories.
The Trip download option creates a .TRP file that is placed in the
Save directory in the CoPilot installation folder on your Smartphone.
Subsequent downloads will add more .TRP files to this folder. The number
of trips that may be stored is limited only by the available memory on your
Smartphone.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Importing Custom Places
4. In the next screen you’ll see the
data from your file sorted into
columns. If the columns you see
in the screen have not sorted
the address data correctly, you
need to indicate which delimiter
CoPilot should recognize when
it separates the fields in your file
into columns. Each field — e.g.
name, street address, city, state,
etc. — needs to be separated by a
delimiter such as a tab, semicolon,
or comma. If your file uses a
delimiter other than a comma, tab,
or semicolon, click Other and
type the delimiter in the box to
the right. If the first row of your
file consists of column headings,
you should check Column
CoPilot’s Custom Place ImportWizard enables you to import addresses
from your Outlook Contacts database, an Excel file, or text file. (If you
are using another type of database or contact manager, you can export
your contacts/ locations to an Excel or text file before importing them
into CoPilot.) These points are then added to CoPilot’s POI database in
a category and type of your choice (the default category is “Custom”).
Once in the database, they are displayed on maps as pushpins and
included in search results when you search for points of interest on your
Smartphone or in theTrip Planner window on your desktop/laptop.
NOTE: CoPilot now allows importing of multiple POIs with the same
name (e.g. an entire database of “Starbucks”).
To access theWizard, choose Import Custom Places from the Tools
menu in Planning Mode on the desktop, then follow the step-by-step
instructions given by theWizard.
Steps for Importing:
1. In Planning Mode on your
desktop/ laptop, choose Import
Custom Places from the Tools
menu to open the Import Custom
PlacesWizard.
headings in first row. Click
Next when ready.
5. Now, following the instructions
on the screen, click each column
heading and match the column
headings with your data. To
be accepted by CoPilot, each
imported place must have at least
four fields: Name, Address1,
City, and State. Click Next
when ready.
2. Choose Import from Microsoft
Outlook or Import from an
existing file (this can be a .txt or
an Excel file). Click Next.
3. In the nextWizard screen, type
the path to the file you want to
import or Browse for it, and
use the Category pick list to
indicate a POI category for your
imported places (by default they
are assigned to “Custom”). You
can also choose a Type from the
pick list. To edit the type name,
highlight it on the pick list and
click EditType Name below.
Click Next when ready.
6. In the next screen, following the
instructions, you can assign a name
to the set of columns you just
defined to save you time the next
time you import addresses.
To skip this step, uncheck Save
the columns as a new set.
Click Finish.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Custom Places
After custom places have been added to the database, they can be edited
at any time. Select Manage Custom Places from the Tools menu, then
highlight the custom place you wish to edit, click Edit, and make your
changes. Click Apply when finished.
NOTE: By default, addresses entered as Custom Places are assigned to
the Custom POI category. You can change this assignment at any time by
selecting another Category from the drop-down pick list as you edit.
7. When processing is finished, the Data Import Status window shows
you how many places in your file were matched with addresses in the
CoPilot database. A plus sign in the Accept column indicates a match.
Places that failed to match appear in red and do not have a plus sign.
8. To edit a failed or incomplete match, highlight it and click Edit (see
Editing Custom Places, next page). POI addresses can also be edited after
they are added to the database using the Custom Place Manager.
9. When you are satisfied with the list of addresses, click Add to add
these places to the CoPilot database.
Options below the list let you 1) choose whether to add all addresses
on the list to the database, or just those that were accepted, and 2)
determine how CoPilot will handle any address that duplicates one
already in the database.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Using CoPilot for Guidance
4. The Select Stop screen gives you eight ways
In CoPilot’s Guidance Mode on your Smartphone, you will receive turn-by-
turn route guidance information as you travel. For your safety, the Safety
View screen will hide maps when your speed exceeds 10 m.p.h. to avoid
distractions.
to enter a destination.You can:
Step 4
1 Enter a new Address
2 Enter your Home address
3 Enter your Work address
4 Select a Favorite
1. To launch CoPilot, select your
5 Enter an Intersection
6 Enter an Outlook Contact
7 Search for a Point of Interest (POI)
8 Pick From Map
Smartphone’s Start soft key, then navigate
to the CoPilot application in the Start
menu and press the Action key.
Step 1
Press the Action key on the option you want (these options are
described on the following pages).
There’s no need to enter a starting location. CoPilot uses GPS
positioning to determine your location automatically.
When you have entered at least one stop in the GoingTo screen, you can
press the Start Driving soft key and CoPilot will begin guiding you with
on-screen and spoken directions.
2. In the Welcome screen, select <Going
To>.
If you take a wrong turn or decide to take a different route than the
one CoPilot has generated, no problem! CoPilot will almost instantly
recalculate new directions from your current position.You simply won’t
be able to get lost using CoPilot!
3. Press the Action key with <Add a
Stop> selected in the GoingTo screen to
enter a destination.
Address Entry
1. Select Address in the Select Stop
screen to enter a city or ZIP code and
(optionally) a street address as a stop.
Step 2
Step 3
Step 1
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. In the Address screen, enter a Street
Name with or without a House Number,
and a City or ZIP Code. Choose a State
from the pick list. NOTE: Street address
entry is optional, if you like you can enter
only a city and state or a ZIP code.
3c. For quick zooming, pressing the Action
key will display zoom arrows. Tap up
on the Action key to zoom in or down
to zoom out — these actions can be
repeated until the highest or lowest
zoom level is reached.
Step 3c
Step 2
Step 3
Step 3a
To return to the Select Stop screen to start
over, press Cancel.
3. The Address Matches screen will display a list
of matches that were found in the CoPilot
database. Highlight your choice and press
the Select soft key to continue.
3d. To display the latitude and longitude of
any match, press the Menu soft key and
select Details.
Step 3d
To return to the Address screen, press the
Menu soft key and select Cancel.
Press the Done soft key to return to
the Matches screen.
3a. To see any match on the map, press the
Menu soft key and select Map.
3b. In the map screen, to zoom your view of a
place in closer or out farther away, press
the Menu soft key and select one of the
zoom options.
4. You will see the destination you entered in
the GoingTo screen.
Step 3b
Step 4
Press the Start Driving soft key to begin
receiving guidance, then start driving!
See Start Driving! on p. 21 for a
description of CoPilot guidance screens.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Stop Menu Options
In the GoingTo screen, press the Menu soft key to access options that
include adding, deleting, moving, editing, and optimizing your stops. .
Select Actions > to access more stop options:
> Move Up/Down — Change the order of
stops on your trip by moving the highlighted
stop up or down on the list.
To add another destination, choose Add Stop
from the menu. (This is an alternate way to
do this, you can also simply highlight <Add
a Stop> in the GoingTo list and press the
Action key.)
> Set AsWaypoint —Turn the highlighted
stop into a waypoint. The purpose of
waypoints is to guide your route along roads
you prefer. See p. 24 for more on waypoints.
> Optimize Stops — Reorder stops on the
list to achieve the most efficient route, keeping
your final destination the same.
> Map — See the highlighted stop on the map.
Select Delete to delete the highlighted stop,
or Delete All to clear all stops from the list
(you will be asked to confirm this action).
Select Mode to switch between Guidance,
Walking, and Planning mode — see p. 29 for
a description of each mode.
Select Options to change routing options
— see p. 25-29.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Your Home Address
Select Help and choose Help for on-screen
instructions about basic CoPilot features, or
About for version information about CoPilot.
To program your home address for quick trip
entry, select Home in the Select Stop screen
and enter your home address as you would a
new address (p. 14). The next time you want to
enter your home address as a stop, just select
Home in the Select Stop screen and your
address will be automatically entered.
To edit your home address, select Favorite
in the Select Stop screen, highlight your home
address on the list, then press the Menu soft
key and choose Edit. Or, select a different
Favorite from the list and choose Set as
Home from the menu.
Entering Your Work Address
To program your work address for quick trip
entry, select Work in the Select Stop screen
and enter your work address as you would a
new address (p. 14). The next time you want
to enter your work address as a stop, just
select Work in the Select Stop screen and your
address will be automatically entered.
Select Cancel to close the menu, Exit to
close the CoPilot application.
To edit your work address, select Favorite
in the Select Stop screen, highlight your work
address on the list, then press the Menu soft
key and choose Edit. Or, select a different
Favorite from the list and choose Set asWork
from the menu.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorites
Intersections
Choose Intersections in the Select Stop screen to enter the
intersection of two roads as a stop on your route. Intersections are
entered just like addresses (see p. 14), except that instead of a house
number you enter a “First Street” and “Second Street”. You can name
this location if you like.
CoPilot automatically places every stop you
enter on a list of favorite places for future
quick trip entry. To enter a favorite as a stop,
first select Favorites in the Select Stop screen.
In the next screen, choose one of the places on
the scrollable list, then press Select.
MENU OPTIONS:
Press Menu at the bottom of the screen to
access these options:
Map — Zoom to the highlighted favorite.
Details —View or edit address data for the
highlighted favorite.
Delete — Delete the highlighted favorite.
Delete All — Delete all favorites from your
favorites list.
Entering an Outlook Contact
Set as Home — Set the highlighted favorite
as your Home address for quick trip entry.
®
CoPilot allows you to link directly to Microsoft Pocket Outlook to
retrieve address information. Within moments, you can enter a contact’s
home and/or work address as your destination.
Set asWork — Set the highlighted favorite as
yourWork address for quick trip entry.
Cancel — Return to the Select Stop screen.
To enter a contact, first select Contacts in
the Select Stop screen. In the next screen
you’ll see your list of contacts.
NOTE: When the number of Favorites
on your list reaches 50, each new address
will replace the address that has been
inactive for the longest period of time.
To select a contact, enter the first few letters
of the contact’s first or last name. The sub-
menu will display matches. Highlight the
contact you want, then press Done.
Press Menu and select Cancel to return
to the Select Stop screen. To view or edit a
contact’s address, select Details.
To SaveYour Current Location As a Favorite:
You must be receiving GPS data to save your current location as a favorite.
In any display screen press the Menu soft key, then select Actions > Save
GPS Location.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding Points of Interest
CoPilot enables you to search for points of interest (POI) such as gas
stations, hotels, restaurants, visitor attractions, etc. within the region for
which map data was downloaded from your desktop/laptop computer.
You can then choose a destination from the list of search results.
From the Search Center pick list, choose an area for CoPilot to search
(use the arrows). Options are:
- Current GPS Position (search an area around your current location)
- Town or ZIP Code (in the next screen, enter a town and state or ZIP
code)
Select Points of Interest in the Select Stop
screen to search for POI.
- Recent (in the next screen, choose a location you recently entered as a
To narrow your search and cut down on the
time it takes, you can (optionally) type the first
few letters of a place you have in mind in the
Name field.
destination)
- Contact (in the next screen, choose an address from your Contacts list)
In the Find POI screen you also have the option
to choose a Category and Type of POI from
the pick lists provided (use the arrows).
Press Done to begin the search. A list of POI will be generated. To add a
POI on the list as a stop, select it and then press Done. Or you can press
Menu, then Map to zoom to it on the map, Details to see more address
information, or Call to make contact by phone.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Picking Stops From the Map
CoPilot enables you to pick a stop off the map when you don’t know
the exact address of your destination.
4. With the cursor on the place or address
you want to pick, press Select to add this
place as a stop. Places picked from the map
are marked by an asterisk in the stop list.
Step 4
1. Select Pick from Map in the Select Stop
screen.
Step 1
2. CoPilot will prompt you to enter a location
where you can start searching for the
Step 2
place you have in mind. Highlight one of
the options, press Select, and enter any
necessary information. Choose Current
GPS to zoom to your current location.
3. CoPilot will zoom to the place you enter,
and a crosshair cursor will appear on the
map. Use the menu to Zoom In or Zoom
Step 3
Out. Check Show POIs on the menu to
display points of interest.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Start Driving!
MapViews
Once you have entered at least one stop in the Select Stop screen,
you’re ready to start driving with CoPilot! You’ll receive turn-by-turn
directions and maps to guide you safely to your destination. As you
drive, CoPilot’s dynamic directions will instantly recalculate your route
if you take a wrong turn or decide to go a different way. In addition,
CoPilot can calculate a detour from your current position, giving you
the option to accept the new route or to cancel it and return to your
original route at any time.
The CoPilot map screen displays when you are traveling at less than 10
m.p.h. or .6 miles before each turn. It combines a detailed map display
with concise text instructions.
In any of the four map views, your current GPS position is displayed and
you are tracked in real time as you drive. To choose a map view, press
theView soft key and make your selection:
NextTurn Map — Frames your current location up to the next
turn on your route.
CoPilot speaks directions out loud to you, and also displays them on
your Smartphone screen. There are three guidance screens to choose
from: 1) SafetyView, 2) Map (four views), and 3) Itinerary.
Where Am I Map — Frame a close-up view of your current
location.
Next Stop Map — Frames your route from your current location
to the next stop.
SafetyView
3D Map — Changes CoPilot’s two-dimensional default display mode
to a three-dimensional perspective based off an isometric
camera angle.
The SafetyView displays a text-only screen when your speed exceeds
10 m.p.h. and is the recommended view for safe driving. When
you’re within .6 miles of a turn or driving less than 10 m.p.h., CoPilot
automatically switches to the map screen.
The SafetyView can be accessed from other guidance screens by
pressing the View soft key and choosing SafetyView.
CoPilot’s
Calculated Route
Your Current
GPS Position
NextTurn
Instruction
NextTurn
Directional
Information Bar:
Every 3 seconds,
alternates between
next turn, current road,
and ETA/distance to
next stop.
GPS Status:
Green = 3D Fix
Yellow = 2D Fix
Red = No Fix
Arrow
Distance to
NextTurn
Next Stop
(customizable, see
Guidance. p. 27)
Green = 3D Fix
Live Network Connection
GPS Status:
Yellow = 2D Fix
Red = No Fix
EstimatedTime
of Arrival (ETA)
Live Network Connection
at next stop
Distance to Next Stop
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming and ShiftingYour MapView
Trip Editing
To zoom your view of the map in or out, press the Menu soft key and
select Zoom In or Zoom Out. Or, press the Action key to display
the zoom arrow, then press up to zoom in or down to zoom out. This
action can be repeated until the minimum or maximum zoom level is
reached.
To make changes to your trip at any time from the guidance screens,
press the Menu soft key and choose EditTrip. This returns you to the
GoingTo screen where all your stops are listed. Highlight a stop, press
Menu again, and select a trip editing option from the menu:
Add Stop Add a stop after the highlighted stop.
To navigate to another area of the map, use the Action key as a
navigation pad: press up, down, left, or right as many times as you like.
Delete
Delete the highlighted stop.
Delete All Delete all stops on the list.
Actions > Move Up: Moves the highlighted stop up on the list.
Move Down: Moves the highlighted stop down.
Set asWaypoint: Turns a stop into a waypoint (see p. 24).
Optimize Stops: Reorganizes stops in the most efficient
order, keeping the last stop the same. This action is not
reversible.
Map: Zooms to the highlighted stop on the map.
Mode >
Opens the Mode menu — see p. 29.
Options Opens the Options menu to change routing, mapping, and
ItineraryView
guidance settings — see p. 25-29.
Help >
Help: Accesses CoPilot Help topics.
TheTrip Itinerary is a scrollable set of driving directions for the current
trip. Individual roads on your Itinerary can be avoided using the Menu
in this screen — highlight the road to avoid and select Actions > Avoid
Road.
About: Shows CoPilot version number and copyright.
Welcome Screen: Returns to the CoPilotWelcome
screen.
Cancel
Exit
Returns you to the guidance screen.
Closes CoPilot.
Distance between turns
Direction of turns along
your route
Roads for upcoming turns
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Options on the Road
Calculating a Detour
From any guidance screen, you can zoom your map view in and out, edit
your trip, calculate a detour, save your location as a favorite, and more.
Press the Menu soft key and select any of the following options:
If for any reason you find that you want to take an alternate route
around a particular road segment — no problem! CoPilot can calculate
a detour on command, tell you how much longer it will be, and then give
you the option to accept the new route or cancel it and return to the
original route at any time.
Zoom In/Out In the map screen, zooms your
view in/out.
To have CoPilot generate a detour, press the View soft key in either the
Safety or Map screen. Then select Actions > Detour or just hit “3”
on the keypad. You will see the new route appear on the map (your old
route will be drawn in blue). To reject the new route and return to the
original route at any time, select Actions > Cancel Detour or hit “6”.
EditTrip Navigates to the GoingTo screen for
trip editing (see p. 22).
Actions > Detour: Calculates an alternate
route.
Cancel Detour: Cancels a
calculated detour and returns to
the original route.
Save GPS Location: Saves your current GPS location as a
Favorite so you can enter it as a stop in the future.
Pick Stop: Enables you to enter a stop by picking it directly
from the map — see p. 20.
Traffic > Displays real-time traffic information settings if this service
is available in your region and included with your CoPilot
purchase. See Real-TimeTraffic Information, p. 39-40.
Mode >
Opens the Mode menu — see p. 29.
Options > Opens the Options menu to change routing, mapping, and
guidance settings — see p. 25-29
Help >
Exit
Displays CoPilot Help topics.
Closes CoPilot.
Hotkeys
CoPilot uses the number pad (0-9) as “Hotkeys” that are directly linked
to often-used features. For example, while driving in Guidance Mode,
you can find a Detour by pressing 3 on the number pad instead of
pressing Menu > Actions > Detour.
You can determine which features are tied to Hotkeys by pressing
Menu and looking to the right of each menu item.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Avoiding Roads
Getting ETA’s and Distances
To avoid an individual road and have CoPilot calculate another route
around that road, you must be in the Itinerary screen. From there,
find the road you want to avoid in the scrollable list and highlight it, then
press the Menu soft key and select Actions > Avoid Road.
The estimated time of arrival (ETA) and distance to your next stop
will always be shown at the bottom of the SafetyView screen. To bring
up the SafetyView screen, enter one or more stops, press the Start
Driving soft key, then select SafetyView from the View menu.
If your trip has multiple stops and you want to know the ETA for a
destination that is not the next stop, designate the stops between your
current location and the target stop as waypoints — highlight each
one in the GoingTo screen, then press the Menu soft key and choose
Actions > Set asWaypoint. When all intermediate stops have been
changed to waypoints, the SafetyView screen will display the ETA to
your final destination.
To cancel any road preferences that have been set and return to your
original route, select Actions > Cancel Avoid.
The waypoints you created can be easily changed back to stops —
highlight each one, press the Menu soft key, and select Actions > Set
as Stop.
Waypoints
“Waypoints” are not treated like stops in the Itinerary for your trip,
their purpose is to guide CoPilot route calculations along roads that you
choose.
To change a stop to a waypoint, highlight the stop in the GoingTo screen,
press the Menu soft key, then select Actions > Set asWaypoint. On
the stop list, the flag icon next to this stop will be replaced by a round
icon with an arrow pointing to the right.
ETA and Distance to Next Stop
To change a waypoint back to a stop, choose Actions > Set as Stop
from the menu.
CoPilot ignores waypoints when calculating the ETA and distance to the
next stop, so setting waypoints can be used to get the ETA and distance to
a stop that is not your next stop (see Getting ETA’s and Distances below).
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
General Options
Saving a Current Location as a Favorite
To save your current location as a Favorite, press the Menu soft key
in the SafetyView or Map screen, then select Actions > Save GPS
Location.
Press the Menu soft key
in the GoingTo screen
or any guidance screen,
then select Options
to access a menu of
CoPilot program options
and settings.
GPS
Select GPS in the Options menu. The GPS
screen provides tools for setting up and
viewing your Smartphone’s GPS functionality.
Optimizing Your Stop Order
In the GPS screen, press the Menu soft key
and select Turn On Bluetooth to turn your
phone’s Bluetooth connection on from within
CoPilot. Note that some phones can only have
Bluetooth turned on through theWindows
settings controls.
To rearrange the stops on your trip in the most efficient order, press the
Menu soft key in the GoingTo screen, then select Actions > Optimize
Stops. You must have at least three stops to optimize — the
destination always remains the same.
Press the Menu soft key, then Search for GPS to have CoPilot search
for your Smartphone’s GPS receiver. When your receiver is detected,
you’ll see the name of the receiver along with any other Bluetooth
devices. Highlight the receiver and press Select.
Routing
Select Routing in the Options menu. Basic
options in the Routing screen are:
VehicleType — Options are Automobile or
RV. RV routes favor major roads, incorporate
12’6” bridge height restrictions (US only),
and avoid sharp turns and U-turns wherever
possible.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
RoutingType — CoPilot’s Quickest routing type is based on the
most practical route in terms of road quality, terrain, and urban/rural
classifications. Shortest routing travels the least distance where
possible while maintaining some level of practicality.
Creating a Road Preference Profile
To create a new profile, press Menu > New.
Enter a new Profile Name and set the basic
and advanced routing options the way you
want them for this profile.
Toll Avoidance — Select Always Avoid to always avoid toll roads
even when the resulting route is impractical or out-of-the-way, Use if
Necessary to avoid tolls where practical, or No Restriction to ignore
toll status of roads.
The Take Breaks option affects your ETA
calculation; for example, if you take a 30
minute break for every 4 hours of travel,
CoPilot will adjust the ETA for a 5 hour trip
to 5 1/2 hours.
International Borders Open — (U.S. only) Check to have CoPilot
route across international borders. When this option is turned off, your
route won’t cross borders even when it would be more practical.
Check Confirm profile when routing to
have CoPilot prompt you to choose a profile
each time a new route is calculated.
Show London Congestion ZoneWarning — (U.K. only) Display a
warning when your route will take you into the London Congestion
Zone.
To set avoid/favor preferences and average
road speeds for an individual road class, select
a road class under Edit Preferences for. In
the Freeways screen, use the pick lists to assign
a preference and average road speed.
Advanced Routing Options
Using CoPilot’s Advanced routing options,
you can create combinations of route settings
and road preferences and save them in
separate profiles for quick recall.
Preference — At the extremes, Strongly
Avoid will push the route away from the
road class while Strongly Favor will pull the
route to the road class. They do not cause
road classes to become completely blocked
or routing to exclusively rely on road classes.
NOTE: Advanced routing options include
the ability to alter road preferences and road
speeds for different classes of roads that
CoPilot recognizes as it calculates routes. Be
aware that any change you make applies to
ALL roads in that class. Even minor changes
to road preferences may fundamentally alter
how CoPilot calculates routes, and road
speeds affect your ETA.
Speed — Change the average road speed
that CoPilot uses for every road in this class
when calculating your ETA. Press Done in
each screen as you are finished with it. The
new profile you created will now be available
in the Road Preference Profile pick list.
To access advanced options, set Routing
Options to Advanced at the top of the
Routing screen. All advanced routing options
will be displayed. At the top of these options
you’ll see a Road Preference Profile pick
list of all existing profiles (if there are any).
Settings for the displayed options will reflect
the profile that is selected in the pick list.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidance
SafetyView
Select Guidance in the Options menu.
Select SafetyView from the Options menu.
In the Guidance screen, the settings under
AudioTurnWarnings determine how often
and where CoPilot will give you next turn
information out loud. All, none, or some boxes
can be checked. A pick list gives the options for
Just Ahead: by default you will be alerted 5
sec/100 ft before every turn (5 seconds or 100
feet, whichever is closest), but you can choose
to have CoPilot speak to you sooner (from 2-8
seconds before each turn, or 100 feet).
Use this option to turn map toggling on/off
when using the SafetyView display.
The pick list under Custom Display includes
display options for the customizable data line
in the SafetyView guidance screen. You can
choose to have this line display the next stop
(destination), current road, nearest crossroad,
nearest major road, nearest town, current time,
ETA, current speed, elevation, or heading.
Map
Live
Select Map in the Options menu. Settings in
the Map options screen are:
Select Live from the Options menu.
CoPilot Live allows you to maintain two-way
communication with drivers who are using
CoPilot and to actually see where they are
currently located. You can do this from our
CoPilot Live web page.
Unit — Use the pick list to choose Miles or
Kilometers as the unit of distance.
Map Rotation — Choose Heading Up to
have the map display always track your position
moving upward, or North Up to always
maintain north at the top of the map as you
drive.
See CoPilot Live Communications, p. 38-39, for a
description of these features.
Map Colors — CoPilot offers Day and Night display modes. Colors
are darker and glare is reduced in Night mode. Choose Automatic to
have the mode switch automatically according to time of day.
Language & Speech
See Changing theVoice Options at AnyTime, p. 5.
Display POIs — Choose when CoPilot will display Points of Interest
(POI) on the map. Select Always to always have POI displayed. If
your map is too cluttered, you may want to select Never or When
Stopped.
DisplayTurn Restrictions —When checked, one-way streets and
other turn restrictions are noted on the map.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
You can select one type of POI that you want
to be alerted to from theType list.
POI Alerts
Select POI Alerts in the Options menu.
To toggle the POI Alerts feature on or off,
press the Action key on Enable POI Alerts.
This screen also lets you change settings that
determine when and where alerts will be
activated.
When POI Alerts is enabled, CoPilot will
alert you with a verbal prompt each time you
approach a Point of Interest on or near your
route. A screen alert will also appear (like the
one shown at left), giving you the option to:
In the Report POIs this far ahead screen,
set the distance at which you would like to
receive an alert as you approach each POI.
(The CoPilot default is .2 miles.)
1- Add the POI as a stop on your route
2- Ignore (you can also press Cancel)
3- Go back to the previous screen alert
4- Move forward to the next screen alert
In the Report POIs which are screen, you
can increase the number of alerts you receive
by selecting Near My Route.
You can select one category of POI that you
want to be alerted to from the Category list.
(By default, CoPilot detects only POIs that are
directly on your route.)
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CoPilot Modes
Upgrade License
CoPilot has three modes of operation on your Smartphone. To switch
modes, press Menu > Mode in the GoingTo screen or any guidance
screen.
Select More... at the bottom of the Options
menu, then select Upgrade License. This
screen enables you to upgrade your current
version of CoPilot.
Guidance Mode
In Guidance Mode, you enter one or more destinations, then press
Start Driving to start driving and receive guidance. This mode
provides you with on-screen and spoken driving directions and other
information relevant to your trip, such as estimated time of arrival (ETA)
and distance to the next stop.
To receive driving directions and other data, you must have a GPS
receiver that CoPilot recognizes and the receiver must be in a good
position to receive signals.
Walking Mode
Take CoPilot with you wherever you go! Walking Mode provides an as-
the-crow-flies distance and direction line to your destination, directions
that are perfect for walking. A GPS receiver must be attached and
receiving signals.
Backlight
Planning Mode
Select Backlight from the Options menu.
Planning Mode lets you use your Smartphone as a pre-trip planning tool
or easy-to-use reference guide. Planning Mode lets you view static maps
and directions without the need for a GPS receiver.
To keep your phone’s backlight on in order to
see CoPilot’s on-screen maps and directions,
you can choose from these options:
With GPS — Backlight is on whenever
CoPilot is receiving GPS signals.
NearTurn — Backlight comes on when you
approach your next turn.
Always — Backlight always on when CoPilot
is running.
Never — Backlight is never on when CoPilot
is running.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip Planning On Your Smartphone
You can use CoPilot on your Smartphone for trip planning whether or
not the GPS receiver is connected and receiving data. In Planning Mode
you can run a trip even when you’re not in your car. You’ll get driving
directions and maps to use as a reference before your trip begins.
5. In the Map screen, the View
menu gives you a choice of three
map views:
6. To see driving directions, press
View and select Itinerary.
• Start Map (zoomed to your
starting location),
• Last Stop Map (zoomed to
your final destination), and
1. First turn on your Smartphone
and launch CoPilot. In the
2. The My Starts & Stops screen
will open. Press the Action
key on <Add a Stop>, then
add stops to your trip.
GoingTo screen, press Menu >
Mode and select Planning.
• Trip Map (zoomed out to
show the whole route).
3. The first stop in the My Starts 4. Now you’ll see your route on
& Stops list is the starting
point of your trip. Press the
Directions soft key when all
stops have been entered to
generate an Itinerary.
the map.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip Planning On Your Desktop
You can use CoPilot’s desktop functions to map out routes and print
maps and driving directions before getting on the road. Desktop trip
planning is an additional feature of CoPilot that is in no way connected
to using your Smartphone for route guidance.
RunTrip
On the following pages you will find brief descriptions of CoPilot’s
desktop trip planning capabilities. For more detailed descriptions,
open CoPilot Help from the desktop application (Help menu > Help
Contents and Search, or click the Help button on the toolbar). Go
to DesktopTrip Planning in the Contents tab.
RunTrip button or RunTrip
in theTrip menu.
To begin planning a trip on your desktop, click the Planning icon in the
sidebar to the left of the map. Using the drop-down menus you can
select from a number of planning features. Many of these features can
also be accessed from the toolbar. Place your cursor on any toolbar
button without clicking to see what it does.
EditTrip
NewTrip
EditTrip button or EditTrip
in theTrip menu.
NewTrip button or NewTrip
in the File menu.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SaveTrip
Print
SaveTrip button or Save
Trip / SaveTrip As... in the File
menu.
Print button or Print... in
the File menu.
OpenTrip
Help
OpenTrip button or Open
Trip in the File menu.
Help button or Help
Contents and Search in the
Help menu.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom In
More Detail
Zoom In button or Zoom
In in the Map menu.
More Detail button or
Detail > Show More in the
Map menu.
Each time you click this
button, your view will
be zoomed in by one
increment. The zoom level
is shown in the title bar of
the map window.
Click to increase the level
of detail you see on the map
by one increment without
changing the zoom level.
Zoom Out
Less Detail
Less Detail button or
Detail > Show Less in the
Map menu.
Zoom Out button or Zoom
Out in the Map menu.
Each time you click this
button, your view will
be zoomed out by one
increment. The zoom level
is shown in the title bar of
the map window.
Click to decrease the level
of detail you see on the map
by one increment without
changing the zoom level.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ZoomTo Region
Pick Stops
Zoom to Region button
or Zoom Region in the Map
menu. This function allows
you to zoom your map view
to a specific area. Choices
in the sub-menu will depend
on which CoPilot data
To turn on Pick Stop mode,
click the Pick Stops button
or right-click on the map
and select Pick Stops. Then
click on any point to enter
it as a stop. Your map view
must be zoomed in to level
11 or 12 (level is displayed
in the CoPilot window title
bar).
region(s) were purchased.
In the dialog that opens, you can choose to enter the point as a start
place, a waypoint, or a destination.
Refresh Map
Options (Tools Menu)
Refresh Map button or
Refresh Map in the Map
menu. When scrolling
through a map you may
notice it takes a few seconds
for all the data to catch up.
This function will snap the
entire screen to a new map.
Select Options from the
drop-downTools menu.
In this window you can change the way you view your desktop maps and
various application settings. For example, in the General tab you can
choose the measure of distance (miles vs. kilometers), and the Map tab
lets you adjust the appearance of features on the map such as roads and
points of interest.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference: CoPilot On Your Desktop
Landmark Reporting
The following is a guide to the main screens you will see as you use
CoPilot on your desktop/laptop computer for trip planning.
MapWindow
Menus and toolbar buttons
to access all of CoPilot’s
desktop features.
Click on a tab to frame any
stop on your route.
Your planned route with
stops. Zoom to a stop
and move your cursor
over any street to see
its name.
Select Landmark Reporting
from the drop-downTrip
menu.
In this window you can control how
many landmarks CoPilot points out
when generating driving directions.
Distance Scale.
Latitude/longitude position
of your cursor on the map.
Help Menu
Use the drop-down Help menu to
access CoPilot Help for assistance
with all aspects of the software and
to quickly access ALK’s web site.
Trip PlannerWindow (Cities & Addresses)
Click Cities and Addresses.
Enter city name/state, or
ZIP code. Enter an address
(optional), with the option to
add a Name to it. Click the
Add Stop button to add the
stop to the Itinerary.
Move stops up or down on
your Itinerary, zoom to stop
location on the map, delete a
stop, or add a favorite.
See p. 37 for routing options.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip PlannerWindow (Points of Interest)
Trip PlannerWindow (Contacts)
Click the Points of Interest tab.
Enter a contact’s first or last
name and press <Enter>.
CoPilot will search your
Enter a state or ZIP code
in which you would like to
search, a radius within which to
search, and (optionally) choose
a category and type from the
drop-down menu.
Contacts database for matches.
Select the Contacts address type
(as defined in Outlook) to get
the appropriate address, then
click the Add Stop button to
add it to your Itinerary.
Click the binoculars to start
the search.
You can also enter a name to
narrow down the search in the
POIs that start with box.
Driving Directions and Map (Split Screen)
You will be given a list of matches
to your search criteria. Highlight
your selection and click Select.
Click the Add Stop button to
add it to your Itinerary.
When you click Run in theTrip Planner window, your route will
be calculated and driving directions and a map will display. To print
either one, click on it and choose Print from the File menu. To print
directions plus all map views, choose TravPak Printing.
Atlas, Start, and End
tabs will zoom to the
map view of those
Driving directions give you turn-
by-turn instructions including
ramps and exits, and distance and
time between turns.
Trip PlannerWindow (Favorites)
places respectively.
Select the Favorites tab.
Highlight a selection from
your list of places by clicking on
it. You can zoom to it on the
map, or delete it from the list
using the buttons to the right.
Click the Add Stop button to
add a favorite to your Itinerary.
See p. 37 for routing options.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Routing Options
Trip Summary
Select Run in theTrip Planner
window to run the trip.
Click the Options button in the
Trip Planner window to access
CoPilot routing options.
TheTrip Summary will show start
and end places, and the number
of stops in between them.
Auto and Quickest are the
default settings, providing the
quickest routing for automobiles
based on practical considerations
such as road quality, terrain, and
urban/rural classifications. RV
routing favors major roads and
avoids sharp turns, U-turns, and
urbanized areas where possible.
In the U.S. only, RV routing avoids
12' 6" height restrictions on
highways. Scenic routing avoids
major roads and favors more
rural and scenic roads wherever
possible and practical.
Total distance and time for trip.
Estimated fuel cost for your trip
based on entries in the Fuel Cost
Calculator (Trip menu).
Click OK to view map and
driving directions.
Fuel Cost Calculator
To calculate an estimate of your
fuel costs for a trip, select Fuel
Cost Calculator from theTrip
menu before you run your route.
Check Avoid Propane
RestrictedTunnels if desired.
Fill in the average cost per gallon
of fuel that you expect to pay,
and the distance per gallon you
can expect to get in your vehicle.
Click OK, then run your trip. A
fuel cost estimate based on what
you entered will be calculated
and shown in theTrip Summary
that CoPilot creates for every
trip you run.
Click Advanced to set general
road preferences.
Drag the sliding bars to the left
or right to avoid or favor each
road type.
Set the road speeds CoPilot uses
in its route calculations for each
type of road by either typing or
clicking the up and down arrows
under Rural and Urban for
each road type.
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up a CoPilot LiveWeb Account
To use Live capabilities, your Smartphone must have a wireless Internet
connection. To create your account on the CoPilot Live website:
CoPilot Live Communications
CoPilot Live allows you to maintain two-way communication with drivers
who are using CoPilot and to actually see where they are currently located.
You can do this from the CoPilot Live web page.
1. Go to the web site for your region:
Using this CoPilot Live functionality requires the following:
1) If you want to track and message other drivers from a
desktop or laptop computer: Your PC must be connected to the
internet so that you can access our CoPilot Live web page through a
normal web browser.
2. Choose a Username and Password that you will use to login to
the CoPilot Live network.
3. Fill in the rest of the required information.
2) If you want others to track and send messages to you:
CoPilot Live must be running on your Smartphone in your vehicle.
You must have a wireless Internet connection.
4. Click “Submit” to create your account.
Set UpYour Smartphone
Take advantage of your Smartphone’s wireless Internet (GPRS) connection
for real-time traffic alerts, tracking, messaging, and itinerary updates.
About the CoPilot LiveWeb Page
As a CoPilot user, you can create an account on our website that allows
your family, friends, and coworkers to “see” you and communicate with you
anywhere in the world!
First, create your Username and Password on the CoPilot Live website
as described above. Then, on your Smartphone, open CoPilot and select
Menu > Options > Live. Live options are:
Through the website you can do all of the following:
• Login: Check Enable Live Communications and enter the
Username and Password you created on the CoPilot Live
website. The Screen Name is how others will identify you.
•
•
•
Send text messages to CoPilot users on the road, using large,
customizable, one-touch response buttons to ensure driver safety.
Real-time tracking of other people who are on the road. See their
current location, destination, ETA and much more on a map.
NOTE: Your screen name, user name, and/or password can
be changed as many times as you like. But you’ll need to change
your user name or password on the LiveWeb page before changing
them on your Smartphone. This is not required for
your screen name.
Send trip itinerary updates including new stops and revised
destinations — you can coordinate a change in plans with someone
who’s on the road right now.
•
Create an online account from where you can send temporary or
permanent tracking numbers to friends and family, giving you tighter
control of the security so you know who has access to you while
you’re on the road. You can also create and join groups with other
CoPilot users, and manage all your account preferences.
• Settings: Choose the message timeout and how frequently you want
to broadcast your position. Less frequent broadcasts will reduce the
data traffic on your Internet plan.
• Invitations: Invitations can be sent to e-mail recipients for real-time
location tracking.
To learn more about CoPilot’s Live capabilities, visit ALK’s CoPilot Live web
(Europe). Click the Help button at the top of the home page.
• Messages: View or Delete messages received.
•Traffic Settings: Where available. Select your traffic data source; if
using aTMC traffic receiver, set tuner and frequency options. See Real-
TimeTraffic Information, p. 39-40.
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Real-Time Traffic Information
Your Live connection status is shown at the bottom right of the black
information bar:
In addition to providing users with pre-trip planning and GPS route
guidance capabilities, CoPilot uses wireless communications to
automatically send real-time information to drivers, notifying them of
traffic incidents along the route ahead and potential alternate routes.
As soon as the user selects a destination, CoPilot will provide dynamic
driving directions and regularly updated traffic incident reports.
• Green — Good.
• Yellow — OK. Usually seen when first connecting or in poor
GPRS coverage.
• Red — No connection. Check your GPRS network coverage
and Live settings.
There are two ways to receive real-time traffic feeds with CoPilot Live:
1. Use a wireless Internet (GPRS) connection to receive traffic
incidents through a traffic service provider.
2. Use aTMC-enabled traffic receiver to obtain traffic incidents
through a dedicated FM band.
Traffic is an optional additional-cost service and is not available in all areas.
Real-TimeTraffic in Guidance Mode
Provided that CoPilot has GPS acquisition, a user-inputted destination,
and a traffic feed (GPRS orTMC), it will provide regularly updated traffic
incident reports in Guidance Mode. As soon as the user selects a
destination, CoPilot begins providing dynamic driving directions as well as
regularly updated traffic incident reports and alternate routes based on
the user’s destination and route ahead.
Traffic Options
To configure traffic options, on your Smartphone select Menu > Options
> Live > Traffic.
• EnableTraffic: Switch on theTraffic service.
• Automatically CheckTraffic: Select to have CoPilot automatically
check for traffic incidents when you first run a route and periodically
after that as you drive into new areas.
• Default Action: Choose either Ignore or Avoid. If a new traffic
alert times out before you look at it, that incident will take the default
action. The Avoid setting will generate an alternate route.
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Responding to Incident Alerts
UsingTraffic
In Guidance Mode, press Menu >Traffic. Options in this menu are:
CoPilot Live alerts you when a traffic incident
is detected on your route ahead. Press 9 to
see a list of all current incidents.
• Check Route: Select Check Route to manually check for traffic
incidents along your current route.
• FindTraffic: Select FindTraffic to search for traffic incidents
around any location.
• ReviewTraffic: To view or change your traffic routing, press Menu
>Traffic > ReviewTraffic.
• ClearTraffic: To set all incidents to Ignore, press Menu >Traffic
> ClearTraffic.
In theTraffic screen, highlight an incident and
press Menu for response options.
Avoiding aTraffic Incident: When CoPilot sends a traffic incident
alert, pressing 9 will open a list of current traffic incidents. You can
choose to Avoid or Ignore each incident — highlight it and press
Menu > Avoid or Menu > Ignore. CoPilot will automatically route
around any incident you choose to avoid.
If you choose to Avoid the incident, a new
route will be calculated to avoid congestion.
If you Ignore the incident, your route will
continue unchanged. If an alert times out
before you respond to it, CoPilot will use
your default incident action for any unviewed
incidents (see Traffic Options p. 39).
Traffic Icon Display
CoPilot obtains traffic content from a traffic server orTMC station and
displays the information in its maps and itinerary. Incidents are displayed
on the map using the following indicators:
Select Map to see the location of the
congestion on the map, and Details to see
more information about the incident.
General Incident
Accident
Road Construction
Weather
Traffic Jam
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating/Using Your Own Voice
You can create your own voice or load voices that other CoPilot
users have created and posted online. To do this, create a folder with
any name you want and copy sound files with the exact names of the
CoPilot sound files.
NextStop
Continuing to Next Stop
Point of Interest Ahead
You Have ReachedYour Destination
Turn Right
PoiAhead
Rdestination.wav
RightTurn
Roundabout1
Roundabout10
Roundabout2
Roundabout3
Roundabout4
Roundabout5
Roundabout5
Roundabout7
Roundabout8
Roundabout9
SafetyCam
Take 1st Exit at Roundabout
Take 10th Exit at Roundabout
Take 2nd Exit at Roundabout
Take 3rd Exit at Roundabout
Take 4th Exit at Roundabout
Take 5th Exit at Roundabout
Take 6th Exit at Roundabout
Take 7th Exit at Roundabout
Take 8th Exit at Roundabout
Take 9th Exit at Roundabout
Safety Camera Ahead
Make a Sharp Left
The CoPilot sound file names and their associate dialogues are:
File Name
Dialogue
100y.wav
One HundredYards Ahead
One Hundred FiftyYards Ahead
1 Kilometer Ahead
150y.wav
1kmWarning
1miWarning
200mWarning
200y.wav
1 Mile Ahead
200 Meters Ahead
Two HundredYards Ahead
Two Hundred FiftyYards Ahead
2 Kilometers Ahead
250y.wav
2kmWarning
2miWarning
300y.wav
SharpLeft
2 Miles Ahead
SharpRight
Make a Sharp Right
Three HundredYards Ahead
Three Hundred FiftyYards Ahead
Spcam.wav
Speed Camera Ahead
Take Exit
350y.wav
TakeExit
3tenthmiWarning 3/10ths of a Mile Ahead
Then
Then
400y.wav
Four HundredYards Ahead
Four Hundred FiftyYards Ahead
500 Meters Ahead
Five HundredYards Ahead
FiftyYards Ahead
TrafficWarning
TurnAround
Waypoint
Traffic Incident Reported
Turn Around
450y.wav
500mWarning
500y.wav
Approaching Stop
50y.wav
NOTE: The sound files must be saved in OGG orWAV format.
Arrived
Approaching Stop
Bear Left
BearLeft
EXAMPLE:
BearRight
CancelDetour
CPWelcome
Detour
Bear Right
- Create a folder—the name of the folder can be anything you want
(for this example we’ll use ‘FunVoice’ as the folder name).
Cancelling Detour
Welcome to CoPilot
Finding Detour
- Record sound files to replace some or all of the CoPilot sound files
(CoPilot will use the default voice for sound files it does not find).
Fspcam.wav
Junction.wav
JustAhead
Keepleft.wav
Keepright.wav
Keeps.wav
LeftTurn
Attention Fixed Automatic Safety Camera
Take Motorway Junction
Just Ahead
- Copy the folder with the new sound files to Storage Card\CoPilot\
Save\[Choose a language folder].
Keep Left
- Now when you select that language, you’ll see ‘FunVoice’ as one of
the voice options (see page 5 for details on changing your voice).
Keep Right
Keep Straight Ahead
Turn Left
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CoPilot Technical Support
License Upgrade
After registering your software (see p.43), you’re entitled to technical
support and discounts on new versions of CoPilot. Check out ALK’s
web site for technical support documentation and posted answers to
common questions. If the web site does not provide an answer to
your question, technical support for registered users is available during
standard business hours (9:00 am - 5:00 pm Monday-Friday). You should
be at your computer and have your Installation Product Key available
when you contact us (this Product Key can be found on the back cover
of the printed Quick Start Guide that came with the product).
The CoPilot desktop software you purchased contains street-level maps
for all of the United States. Licenses are also available for the following
European and North American regions:
(1) Major region - Detailed street-level maps for any of the following
regions: Alps Ski Region, Benelux (Belgium, the Netherlands, and
Luxembourg), Canada, France, Germany, Italy, Pyrenees, Scandinavia,
and the United Kingdom.
(2) Pan-Europe - Complete street-level maps for all of Europe
(3) United States - Complete street-level maps for the entire U.S.
Please be sure to reach us using the contact information for your region
shown below. We are sorry, but our support staff in ALK’s regional
offices cannot respond to requests for assistance outside the areas they
serve.
If you purchased CoPilot with a single (U.S.) region license and later want
to use street maps from other regions, you will need to purchase an
upgrade license from your dealer. After purchasing a CoPilot region, you
will need to go through the activation process.
Fax: 609-252-8166, Phone: 888-872-8768
Postal: Suite 8, 4 Bloomsbury Square, LondonWC1A 2RP, UK
Phone: +44 (0)207 404 4222
Adding a Data Region
If you have purchased an additional data region after your initial
purchase of CoPilot, you will need to modify the original (“Base”)
installation and activate the new region.
E-mail: support@travroute.com.au, Phone: 03-9855-1498
IMPORTANT: You can only use your Expansion Product Key AFTER
you have installed and activated CoPilot with a Product Key for the Base
product. If you have not yet installed CoPilot, please do so first and then
follow the instructions below.
ONYOUR DESKTOP/LAPTOP:
1. Insert your CoPilot Install Disc into your CD-ROM drive.
2. Select Modify and click Next when the InstallShieldWizard appears.
3. Enter your Expansion Product Key when prompted to enter a
Product Key.
4. Follow the on-screen instructions for installing to your desktop and
Smartphone.
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The ActivationWizard will appear at the end of installation.
Activation occurs just as it did when you originally installed CoPilot
(see p. 4-5).
Using Help Files
CoPilot provides extensive Help Files, available on your desktop/laptop
and your Smartphone, to guide you through the program as you use it.
ONYOUR SMARTPHONE:
To access Help on your Smartphone, once the CoPilot application is
launched, press Menu > Help.
IMPORTANT: You must install and activate CoPilot to your
Smartphone using your Base Product Key AND you must have data
downloaded to your Smartphone before using your Expansion Product
Key.
In the desktop application, click on the Help button in any window to
open a Help topic that describes how to use that window, or use the
Help menu and select Help Contents and Search.
1. Open CoPilot on your Smartphone.
2. Press the Menu soft key, then select Options > More... > Upgrade
License.
Software Registration
3. Enter your Expansion Product Key (found in your order confirmation
Registered users are entitled to technical support, discounts on
new versions of CoPilot, new product information, and software
enhancements.
e-mail) when prompted to enter a Product Key.
4. Follow the on-screen instructions.
5. Activation occurs just as it did when you originally installed CoPilot
(see p. 4-5).
NOTE: Software activation does NOT register your software, they are
two separate processes.
If you have any questions about this process, please visit our Support
Region Selection
If you purchased an additional data region, when downloading map data
to your Smartphone from your desktop PC or laptop you will need to
make sure the proper region is active. To do this, on your desktop in
Planning mode click the Map menu > Region > and check the desired
region. Then restart CoPilot.
ALKTechnologies has a one-per-licensing non-transferable registration.
Unauthorized purchases from private owners are not supported or
under warranty, and special pricing does not apply.
- 43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CoPilot End-User License Agreement
NOTE: On the following pages there are three separate license agreements for users of
• Electronic reproduction and transmission of output to remote locations is not
permitted.
North American, European, and Australian Data.
ALK retains all rights not expressly granted. Nothing in this License Agreement
constitutes a waiver of ALK's rights under the U.S. copyright laws or other applicable
copyright laws or any other federal or state law.
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or
an entity), AND ALKTECHNOLOGIES, INC. ("ALK"). IFYOU DO NOT AGREETO
THETERMS OFTHIS License, DO NOT OPENTHE PACKAGE. Promptly return the
unopened CD-ROM package and accompanying materials (including written materials
and containers) to the dealer from which you
2.Term:
This License is effective upon receipt by you of the Software and upon opening the
package. The License is effective until terminated. You may terminate this License at
any time by returning all copies of the Software, and any portions thereof, to ALK. The
License terminates automatically if you fail to comply with any of the terms of this
License Agreement. You agree upon such termination to return or destroy this CD-
ROM and all other copies of the Software and certify in writing to ALK that you have
done so..
obtained them for a full refund.
OPENINGTHE PACKAGE OR USINGTHE ENCLOSED SOFTWARE
INDICATESYOUR ACCEPTANCE OFTHETERMS OFTHIS License.
ALK®Technologies, Inc. LICENSE AGREEMENT
CoPilot Live | Smartphone 6 with NORTH AMERICAN DATA
LICENSES: 1 User
3. LimitedWarranty:
ALK warrants that all disc(s) on which the Software is furnished shall, for a period of
90 days from delivery (the "Warranty Period") be free, in normal use, from defects in
material and workmanship. ALK will have no responsibility to replace any disc(s) that
have been damaged by accident, abuse, or misapplication.
1. Grant of License:
This ALK License Agreement ("License") is a single-user, non-exclusive, non-
transferable license agreement and not an agreement for sale.ALK hereby
licenses the Help Files and CD-ROM software identified above (collectively,
"the Software") to you under the following terms and conditions.
Customer Remedies:ALK's entire liability and your exclusive remedy shall be, at ALK's
option, either (a) return of the price paid or (b) replacement of the disc(s) that does
not meet ALK's LimitedWarranty, and that is returned to ALK with a copy of your
receipt.
The Software may not be loaded onto a network of any type. You may use the
Software on any compatible personal computer, provided you use it on only one
computer at a time. The Software is "in use" on a computer when it is loaded into the
temporary memory (i.e., RAM) or installed into the permanent memory (e.g., hard disk,
CD-ROM, or other storage device) of that computer. You may make a single back-up
or archival copy of the Software for back-up purposes only. You may not transfer this
Software or assign this License Agreement to another party.
Except as specifically provided above, ALK MAKES NO OTHERWARRANTY OR
REPRESENTATION, EITHER EXPRESS OR IMPLIED,WITH RESPECTTOTHE
SOFTWARE OR DOCUMENTATION, INCLUDING ANYWARRANTY ASTOTHE
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENTWILL ALKTECHNOLOGIES, INC. BE LIABLE FOR
DIRECT DAMAGES IN EXCESS OFTHE License FEE OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OFTHE USE OR
INABILITYTO USETHE SOFTWARE OR DOCUMENTATION, EVEN IF ADVISED
OFTHE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL ALK'S LIABILITY
EXCEEDTHE AMOUNT OFTHE License FEE.
You are not permitted to, during the term of this License Agreement and thereafter:
• Use the Software on a network or file server.
• Use or copy the Software or the accompanying documentation except as
provided in this License Agreement.
While the information contained in the Software was believed to have been correct at
the time of publication,ALK cannot guarantee its accuracy and shall not be subject to
liability for any errors or omissions. Information in the Software and its accompanying
preprinted materials is subject to change without notice and does not represent a
commitment or endorsement on the part of ALK. Routes and miles generated by the
Software are not suitable for commercial truck use.
• Alter, merge, modify, or adapt the Software or the accompanying documentation in
any way including disassembling or decompiling this Software.
• Loan, lease, sell, transfer, or sublicense the Software or the accompanying
documentation.
• Copy, loan, lease, sell, transfer, or sublicense any output of this Software (including
but not limited to printed maps and driving itineraries); However, you may provide
a limited number of printed copies of a single trip to family members or traveling
companions.
THEWARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHERS, ORAL ORWRITTEN, EXPRESS OR IMPLIED. No ALK dealer,
distributor, agent, or employee is authorized to make any modification or addition
to this warranty. Some states do not allow the exclusion or limitation of implied
warranties or limitation of liability for incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
• You are not permitted to use the Software for motor-carrier tariff or routing
purposes.
- 44 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Licensee's Responsibility:
physical media. Fonix reserves all rights not specifically granted in this Agreement.
You assume all responsibility for, and ALK shall not be liable for, all action taken,
decisions made, and advice given as a result of your use of the Software.
USE AND RESTRICTIONS:You may operate the Software on only one computer.
However, if you have purchased a network or multiple-user license, you may load
and use as many single-use copies and/or support as many concurrent users, in the
aggregate, as are authorized by such license. You may make only one copy of the
Software, retaining the Fonix CD or other media for storage and back-up purposes. The
Software does not include updates, maintenance, or support, which may be separately
available. This Software and its voice output are for your personal, individual use only.
You are not permitted to broadcast or distribute the voice output of the Software (i.e.,
synthesized speech) to more than one person or to use the Software's voice output
for any commercial purposes. You may not modify, adapt, translate, rent, lease, loan,
resell for profit, distribute, network, or create derivative works based on any part of the
Software. You may not reverse engineer, decompile, or disassemble the Software.
5. US Government Restricted Rights:
The Software and documentation are provided with restricted and limited rights. Use,
duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraphs (c) (1) and (2) of the Commercial Computer Software-Restricted Rights
clause at 48 CFR 52.227-19, as applicable. Manufacturer is ALKTechnologies, Inc., 1000
Herrontown Road, Princeton, NJ 08540.
6. General:
The export or re-export of the Software may be restricted by the laws of the United
States and other countries, and you shall not export this Software in violation of any
such applicable laws. This License Agreement is governed by the laws of the State of
New Jersey.
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under
normal use, free from defects in material and workmanship for one year from the date
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,
will be replacement of the defective media without charge. EXCEPT FORTHIS
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE License FEEYOU
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR SUCH
LOSS OR DAMAGE.
© Copyright 1990-2006 ALKTechnologies, Inc.
--------------------------------------------------------------------------
Exit Authority (c) 1999-2006 Zenrin USA, Inc. All rights reserved.
--------------------------------------------------------------------------
Disclosure for products containing Canadian Postal Code and/or Canadian
Street-Level Data:
Based on Computer File(s) licensed from Statistics Canada. © Copyright, HER MAJESTY
THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Industry,
Statistics Canada 2006. ALKTechnologies, Inc. is an Authorized User of selected
Statistics Canada Computer File(s) and Distributor of derived Information Products
under Licensing Agreement 6147. No confidential information about an individual,
family, household, organisation or business has been obtained from Statistics Canada.
The above limitations may be superseded by law in some jurisdictions.
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying
materials are provided with Restricted Rights. Use, duplications, or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.
--------------------------------------------------------------------------
Software License Agreement for FONIXTEXTTO SPEECH ENGINE
IMPORTANT! READTHIS License AGREEMENT BEFORE OPENINGTHIS SOFTWARE
PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE SOFTWARE,YOU
INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.
SOFTWARE License AGREEMENT
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"), but
may be superseded by a separate license agreement that you and Fonix have signed.
The software in this packet ("Software") and its media and documentation (collectively,
the "Product") are protected by copyright and other intellectual property laws and
international treaties. You have no title to, or ownership of, the Product, other than its
- 45 -
Download from Www.Somanuals.com. All Manuals Search And Download.
of the Software has resulted from your fault, abuse, or misapplication. If we correct
an error in the Software for you, then the unexpired portion of the LimitedWarranty
period as at the date you informed us of the error will apply to the corrected software
once you have received the corrected version.
ALK® Technologies, Inc. License AGREEMENT
CoPilot Live | Smartphone 6 with EUROPEAN DATA
LICENSES: 1 User
NO OTHERWARRANTIES: EXCEPT AS SET OUT INTHE LIMITED
WARRANTY,ALK DOES NOTWARRANTTHATTHE SOFTWARE IS ERROR FREE.
ALK DISCLAIMS ALL OTHERWARRANTIESWITH RESPECTTOTHE SOFTWARE,
WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTO IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NON-INFRINGEMENT OFTHIRD PARTY RIGHTS. Some jurisdictions do not
allow the exclusion of implied warranties or limits on how long an implied warranty
may last, or an exclusion of incidental damages. This means the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights depending on your country.
IMPORTANT: Please read the following agreement ("License") carefully.
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or an
entity),AND ALKTechnologies, Inc. ("ALK"). IFYOU DO NOT AGREETOTHETERMS
OFTHIS License, DO NOT INSTALLTHE SOFTWARE. Promptly return the package
and accompanying materials (including written materials and containers) to the dealer
from which you obtained them for a full refund.
Acceptance: Installation or use of the enclosed ALKTechnologies, Inc. ("ALK")
software (the "Software") on your computer constitutes your acceptance of these
terms. If you do not agree to the terms of this License, you must immediately delete
the Software from your computer and destroy any copies you made of the Software
and of any written materials relating to the software, and promptly return the Software
and, if bought as part of a package, any associated devices to your retailer for a refund.
No Liability for indirect loss: In no event will ALK be liable to you for any loss
of profit, wasted time, lost business or for any incidental, or indirect loss of any kind
arising out of the performance or use of the Software, even if ALK has been advised of
the possibility of such damages.
License: ALK grants you, as an individual, a License to install and use one copy of the
Software on a single personal computer at a time.Your License to use the Software
is subject to you complying with the terms of this License. A License is required for
each installation of the Software, unless the Software is (i) installed temporarily on a
computer during the repair or maintenance of the computer on which the Software is
normally installed and (ii) is immediately deleted from such computer as soon as those
repairs or maintenance are complete. You may make one copy of the Software for
backup purposes only.
Termination: Without prejudice to its other rights,ALK may terminate this License if
you fail to comply with these terms and conditions. In that situation, you must destroy
all copies of the Software.
Choice of Law: This License is governed by the laws of England.
-----------------------------------------------------------------------------
End User License Agreement for NAVTEQ European Data
For Portable Navigation Device Applications
Copyright: United States copyright law and international treaty provisions protect
the Software.You agree that no title to the intellectual property in the Software is
transferred to you.You further acknowledge that title and ownership rights will remain
the exclusive property of ALK, and you will not acquire any rights to the Software
except as expressly set out in this License. You agree that any copies of the Software
will contain the same proprietary notices that appear on and in the Software.
The data (“Data”) is provided for your personal, internal use only and
not for resale. It is protected by copyright, and is subject to the following
terms and conditions which are agreed to by you, on the one hand, and ALK
Technologies Inc. (“ALK”) and its licensors (including their licensors and
suppliers) on the other hand.
Prohibited Use: Unless you have ALK's prior written permission, you may not (i) use,
copy, modify, alter, or transfer the Software or accompanying documentation, except
as expressly permitted in this License; (ii) translate, disassemble, decompile, or reverse
engineer the Software (iii) sublicense or lease the Software or its documentation; or
(iv) use the Software in a multi-user or networked environment or on a rental basis or
in a time-sharing or computer service business.
© 2006 NAVTEQ. All rights reserved.
TERMS AND CONDITIONS
Personal Use Only. You agree to use this Data together with COPILOT® LIVE for
the solely personal, non-commercial purposes for which you were licensed, and not
for service bureau, time-sharing or other similar purposes. Accordingly, but subject to
the restrictions set forth in the following paragraphs, you may copy this Data only as
necessary for your personal use to (i) view it, and (ii) save it, provided that you do not
remove any copyright notices that appear and do not modify the Data in any way. You
agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse
engineer any portion of this Data, and may not transfer or distribute it in any form, for
any purpose, except to the extent permitted by mandatory laws.
LimitedWarranty: ALK warrants that the Software will perform substantially in
accordance with the accompanying written materials for a period of 30 days from the
date of purchase. Any implied warranties relating to the Software are limited to such
30 day period provided that limitation is permitted by applicable law.
End-User Remedies: If the Software does not conform to the "LimitedWarranty"
above,ALK's entire liability and your sole and exclusive remedy will be, at ALK's option,
either to (i) correct the error, or (ii) help you work around the error, or (iii) accept a
return and issue a refund through your retailer.The LimitedWarranty is void if failure
- 46 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions. Except where you have been specifically licensed to do so by ALK,
and without limiting the preceding paragraph, you may not (a) use this Data with
any products, systems, or applications installed or otherwise connected to or in
communication with vehicles, capable of vehicle navigation, positioning, dispatch,
real time route guidance, fleet management or similar applications; or (b) with or in
communication with any positioning devices or any mobile or wireless-connected
electronic or computer devices, including without limitation cellular phones, palmtop
and handheld computers, pagers, and personal digital assistants or PDAs.
Governing Law. The above terms and conditions shall be governed by the laws of
the Netherlands, without giving effect to (i) its conflict of laws provisions, or (ii) the
United Nations Convention for Contracts for the International Sale of Goods, which
is explicitly excluded. You agree to submit to the jurisdiction of the Netherlands for
any and all disputes, claims and actions arising from or in connection with the Data
provided to you hereunder.
----------------------------------------------------------------------------------------
Software License Agreement for FONIXTEXTTO SPEECH ENGINE
Warning. The Data may contain inaccurate or incomplete information due to the
passage of time, changing circumstances, sources used and the nature of collecting
comprehensive geographic data, any of which may lead to incorrect results.
IMPORTANT! READTHIS License AGREEMENT BEFORE OPENINGTHIS
SOFTWARE PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE
SOFTWARE,YOU INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.
NoWarranty. This Data is provided to you “as is,” and you agree to use it at
your own risk. ALK and its licensors (and their licensors and suppliers) make no
guarantees, representations or warranties of any kind, express or implied, arising by
law or otherwise, including but not limited to, content, quality, accuracy, completeness,
effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be
obtained from this Data, or that the Data or server will be uninterrupted or error-free.
SOFTWARE License AGREEMENT
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"), but
may be superseded by a separate license agreement that you and Fonix have signed.
The software in this packet ("Software") and its media and documentation (collectively,
the "Product") are protected by copyright and other intellectual property laws and
international treaties. You have no title to, or ownership of, the Product, other than its
physical media. Fonix reserves all rights not specifically granted in this Agreement.
Disclaimer ofWarranty: ALK AND ITS LICENSORS (INCLUDINGTHEIR
LICENSORS AND SUPPLIERS) DISCLAIM ANYWARRANTIES, EXPRESS OR IMPLIED,
OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR NON-INFRINGEMENT. Some States,Territories and Countries do not
allow certain warranty exclusions, so to that extent the above exclusion may not apply
to you.
USE AND RESTRICTIONS: You may operate the Software on only one computer.
However, if you have purchased a network or multiple-user license, you may load
and use as many single-use copies and/or support as many concurrent users, in the
aggregate, as are authorized by such license. You may make only one copy of the
Software, retaining the Fonix CD or other media for storage and back-up purposes.
The Software does not include updates, maintenance, or support, which may be
separately available. This Software and its voice output are for your personal, individual
use only. You are not permitted to broadcast or distribute the voice output of the
Software (i.e., synthesized speech) to more than one person or to use the Software's
voice output for any commercial purposes. You may not modify, adapt, translate, rent,
lease, loan, resell for profit, distribute, network, or create derivative works based on
any part of the Software. You may not reverse engineer, decompile, or disassemble the
Software.
Disclaimer of Liability: ALK AND ITS LICENSORS (INCLUDINGTHEIR
LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLETOYOU: IN RESPECT OF
ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OFTHE NATURE OFTHE
CAUSE OFTHE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY
OR DAMAGES, DIRECT OR INDIRECT,WHICH MAY RESULT FROMTHE USE OR
POSSESSION OFTHE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE,
CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OFYOUR USE OF OR
INABILITYTO USETHIS INFORMATION,ANY DEFECT INTHE INFORMATION,
ORTHE BREACH OFTHESETERMS OR CONDITIONS,WHETHER IN AN ACTION
IN CONTRACT ORTORT OR BASED ON AWARRANTY, EVEN IF ALK OR ITS
LICENSORS HAVE BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.
Some States,Territories and Countries do not allow certain liability exclusions or
damages limitations, so to that extent the above may not apply to you.
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under
normal use, free from defects in material and workmanship for one year from the date
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,
will be replacement of the defective media without charge. EXCEPT FORTHIS
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE License FEEYOU
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,
Export Control. You agree not to export from anywhere any part of the Data
provided to you or any direct product thereof except in compliance with, and with all
licenses and approvals required under, applicable export laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire agreement
between ALK (and its licensors, including their licensors and suppliers) and you
pertaining to the subject matter hereof, and supersedes in their entirety any and all
written or oral agreements previously existing between us with respect to such subject
matter.
- 47 -
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR
SUCH LOSS OR DAMAGE.
may make a single back-up or archival copy of the Software for back-up purposes only.
You may not transfer this Software or assign this License Agreement to another party.
You are NOT permitted, during the term of this License Agreement and thereafter to:
• Use the Software on a network or file server.
• Use or copy the Software or the accompanying documentation except as provided in
this License Agreement.
The above limitations may be superseded by law in some jurisdictions.
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying
materials are provided with Restricted Rights. Use, duplications, or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.
• Alter, merge, modify, or adapt the Software or the accompanying documentation in
any way including disassembling or decompiling this Software.
• Loan, lease, sell, transfer, or sublicense the Software or the accompanying
documentation.
• Copy, loan, lease, sell, transfer, or sublicense any output of this Software (including
but not limited to printed maps and driving itineraries); However, you may provide
a limited number of printed copies (up to 10) of a single trip to family members or
traveling companions.
GENERAL: If any term of this Agreement is found void or unenforceable, all other
terms shall remain in full force and effect. This Agreement shall be governed by the
internal laws of Utah. If you breach any term of this Agreement, Fonix may terminate
this license and you must return all copies of the Product to Fonix.
• You are not permitted to use the Software for motor-carrier tariff or routing
purposes.
• Electronic reproduction and transmission of output to remote locations are not
permitted.
ALKTechnologies, Inc. License AGREEMENT
CoPilot Live | Smartphone 6 with AUSTRALIAN DATA
LICENSES: 1 User
ALK retains all rights not expressly granted. Nothing in this License Agreement
constitutes a waiver of ALK's rights under the U.S. copyright laws or other applicable
copyright laws or any other federal or state law.
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or an
entity),AND ALKTechnologies, Inc. ("ALK"). IFYOU DO NOT AGREETOTHETERMS
OFTHIS License, DO NOT INSTALLTHE SOFTWARE. Promptly return the package
and accompanying materials (including written materials and containers) to the dealer
from which you obtained them for a full refund.
2.Term:
This License is effective upon receipt by you of the Software and upon opening the
package. The License is effective until terminated. You may terminate this License at
any time by returning all copies of the Software, and any portions thereof, to ALK. The
License terminates automatically if you fail to comply with any of the terms of this
License Agreement. You agree upon such termination to return or destroy this CD-
ROM and all other copies of the Software and certify in writing to ALK that you have
done so.
INSTALLINGTHIS SOFTWARE INDICATESYOUR ACCEPTANCE OFTHETERMS
OFTHIS License.
1. Grant of License:
3. LimitedWarranty:
This ALK License Agreement ("License") is a single-user, non-exclusive, non-transferable
license agreement and not an agreement for sale.ALK hereby licenses the on-line User
Guide and CD-ROM software identified above (collectively, "the Software") to you
under the following terms and conditions.
ALK warrants that all media on which the Software is furnished shall, for a period of
90 days from delivery (the "Warranty Period") be free, in normal use, from defects in
material and workmanship. ALK will have no responsibility to replace any disc(s) that
have been damaged by accident, abuse, or misapplication.
The Software may not be loaded onto a network of any type. You may use the
Software on any compatible personal computer, provided you use it on only one
computer at a time. The Software is "in use" on a computer when it is loaded into the
temporary memory (i.e., RAM) or installed into the permanent memory (e.g., hard disk,
CD-ROM, or other storage device) of that computer. If the Software is permanently
installed on the hard disk or other storage device of a computer (other than a network
server) and one person uses that computer more than 80 percent of the time it is in
use, then that person may also use the Software on a portable or home computer. You
Customer Remedies:ALK's entire liability and your exclusive remedy shall be, at ALK's
option, either (a) return of the price paid or (b) replacement of the media that does
not meet ALK's LimitedWarranty, and that is returned to ALK with a copy of your
receipt.
Except as specifically provided above,ALK MAKES NO OTHERWARRANTY OR
REPRESENTATION, EITHER EXPRESS OR IMPLIED,WITH RESPECTTOTHE
SOFTWARE OR DOCUMENTATION, INCLUDING ANYWARRANTY ASTOTHE
- 48 -
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENTWILL ALK BE LIABLE FOR DIRECT DAMAGES IN
EXCESS OFTHE License FEE OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OFTHE USE OR INABILITYTO USE
THE SOFTWARE OR DOCUMENTATION, EVEN IF ADVISED OFTHE POSSIBILITY
OF SUCH DAMAGES. IN NO CASE SHALL ALK'S LIABILITY EXCEEDTHE
AMOUNT OFTHE License FEE.
USE AND RESTRICTIONS:You may operate the Software on only one computer.
However, if you have purchased a network or multiple-user license, you may load
and use as many single-use copies and/or support as many concurrent users, in the
aggregate, as are authorized by such license. You may make only one copy of the
Software, retaining the Fonix CD or other media for storage and back-up purposes.
The Software does not include updates, maintenance, or support, which may be
separately available. This Software and its voice output are for your personal, individual
use only. You are not permitted to broadcast or distribute the voice output of the
Software (i.e., synthesized speech) to more than one person or to use the Software's
voice output for any commercial purposes. You may not modify, adapt, translate, rent,
lease, loan, resell for profit, distribute, network, or create derivative works based on
any part of the Software. You may not reverse engineer, decompile, or disassemble the
Software.
While the information contained in the Software was believed to have been correct at
the time of publication,ALK cannot guarantee its accuracy and shall not be subject to
liability for any errors or omissions. Information in the Software and its accompanying
preprinted materials is subject to change without notice and does not represent a
commitment or endorsement on the part of ALK. Routes and miles generated by the
Software are not suitable for commercial truck use.
THEWARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHERS, ORAL ORWRITTEN, EXPRESS OR IMPLIED. No ALK dealer,
distributor, agent, or employee is authorized to make any modification or addition to
this warranty. Some jurisdictions do not allow the exclusion or limitation of implied
warranties or limitation of liability for incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under
normal use, free from defects in material and workmanship for one year from the date
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,
will be replacement of the defective media without charge. EXCEPT FORTHIS
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE License FEEYOU
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR
SUCH LOSS OR DAMAGE. The above limitations may be superseded by law in some
jurisdictions.
4. Licensee's Responsibility:
You assume all responsibility for, and ALK shall not be liable for, all action taken,
decisions made, and advice given as a result of your use of the Software.
5. General:
The export or re-export of the Software may be restricted by the laws of the United
States and other countries, and you shall not export this Software in violation of any
such applicable laws. This License Agreement is governed by the laws of the State of
New Jersey.
-------------------------------------------------------------------------------------
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying
materials are provided with Restricted Rights. Use, duplications, or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.
Software License Agreement for FONIXTEXTTO SPEECH ENGINE
IMPORTANT! READTHIS License AGREEMENT BEFORE OPENINGTHIS
SOFTWARE PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE
SOFTWARE,YOU INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.
SOFTWARE License AGREEMENT
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"),
but may be superseded by a separate license agreement that you and Fonix have signed.
The software in this packet ("Software") and its media and documentation (collectively,
the "Product") are protected by copyright and other intellectual property laws and
international treaties. You have no title to, or ownership of, the Product, other than its
physical media. Fonix reserves all rights not specifically granted in this Agreement.
GENERAL: If any term of this Agreement is found void or unenforceable, all other
terms shall remain in full force and effect. This Agreement shall be governed by the
internal laws of Utah. If you breach any term of this Agreement, Fonix may terminate
this license and you must return all copies of the Product to Fonix.
- 49 -
Download from Www.Somanuals.com. All Manuals Search And Download.
-----------------------------------------------------------------------------------
License Agreement for NAVTEQ AUSTRALIA DATA
DISCLAIMER OFWARRANTY
PREAMBLE
ALK AND ITS LICENSORS (INCLUDINGTHEIR LICENSORS AND SUPPLIERS)
DISCLAIM ANYWARRANTIES, EXPRESS OR IMPLIED, OF QUALITY,
PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT. Some States,Territories and Countries do not allow certain
warranty exclusions, so to that extent the above exclusion may not apply to you.
The data ("Data") is provided for your personal, internal use only and not for resale. It
is protected by copyright, and is subject to the following terms and conditions which
are agreed to by you, on the one hand, and ALKTechnologies, Inc. ("ALK") and its
licensors (including their licensors and suppliers) on the other hand.
© 2005-2006 NAVTEQ. All rights reserved.
PERSONAL USE ONLY
DISCLAIMER OF LIABILITY
ALK AND ITS LICENSORS (INCLUDINGTHEIR LICENSORS AND SUPPLIERS)
SHALL NOT BE LIABLETOYOU: IN RESPECT OF ANY CLAIM, DEMAND OR
ACTION, IRRESPECTIVE OFTHE NATURE OFTHE CAUSE OFTHE CLAIM,
DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT
OR INDIRECT,WHICH MAY RESULT FROMTHE USE OR POSSESSION OF
THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS
OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OFYOUR USE OF OR INABILITYTO
USETHIS INFORMATION,ANY DEFECT INTHE INFORMATION, ORTHE BREACH
OFTHESETERMS OR CONDITIONS,WHETHER IN AN ACTION IN CONTRACT
ORTORT OR BASED ON AWARRANTY, EVEN IF ALK OR ITS LICENSORS HAVE
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. Some States,Territories
and Countries do not allow certain liability exclusions or damages limitations, so to
that extent the above may not apply to you.
You agree to use this Data together with COPILOT for the solely personal, non-
commercial purposes for which you were licensed, and not for service bureau,
time-sharing or other similar purposes. Accordingly, but subject to the restrictions
set forth in the following paragraphs, you may copy this Data only as necessary for
your personal use to (i) view it, and (ii) save it, provided that you do not remove any
copyright notices that appear and do not modify the Data in any way. You agree not
to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any
portion of this Data, and may not transfer or distribute it in any form, for any purpose,
except to the extent permitted by mandatory laws. Multi-disc sets may only be
transferred or sold as a complete set as provided by ALK and not as a subset thereof.
RESTRICTIONS
Except where you have been specifically licensed to do so by ALK, and without
limiting the preceding paragraph, you may not (a) use this Data with any products,
systems, or applications installed or otherwise connected to or in communication with
vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance,
fleet management or similar applications; or (b) with or in communication with any
positioning devices or any mobile or wireless-connected electronic or computer
devices, including without limitation cellular phones, palmtop and handheld computers,
pagers, and personal digital assistants or PDAs.
EXPORT CONTROL
You agree not to export from anywhere any part of the Data provided to you or any
direct product thereof except in compliance with, and with all licenses and approvals
required under, applicable export laws, rules and regulations.
ENTIRE AGREEMENT
These terms and conditions constitute the entire agreement between ALK (and its
licensors, including their licensors and suppliers) and you pertaining to the subject
matter hereof, and supersedes in their entirety any and all written or oral agreements
previously existing between us with respect to such subject matter.
WARNING
The Data may contain inaccurate or incomplete information due to the passage of
time, changing circumstances, sources used and the nature of collecting comprehensive
geographic data, any of which may lead to incorrect results.
GOVERNING LAW
NOWARRANTY
The above terms and conditions shall be governed by the laws of the State of Illinois,
without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations
Convention for Contracts for the International Sale of Goods, which is explicitly
excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all
disputes, claims and actions arising from or in connection with the Data provided to
you hereunder.
This Data is provided to you "as is," and you agree to use it at your own risk. ALK and
its licensors (and their licensors and suppliers) make no guarantees, representations
or warranties of any kind, express or implied, arising by law or otherwise, including but
not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness
for a particular purpose, usefulness, use or results to be obtained from this Data, or
that the Data or server will be uninterrupted or error-free.
- 50 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Team Products Food Warmer USB103 User Manual
TP Link Switch TL SG105 User Manual
Tripp Lite Switch PAM 3 User Manual
Troy Bilt Lawn Mower TB310QS User Manual
Troy Bilt Trimmer TB2040 XP User Manual
Verbatim Blu ray Player Blu ray HD DVD User Manual
Vermont Casting Gas Heater SDDVTCMB User Manual
VocoPro Universal Remote DA X888RV24 User Manual
Vulcan Hart Convection Oven ECO2C ML 114572 User Manual
WatchGuard Technologies Network Router FireboxTM System 46 User Manual