COMBINATION COLOR TELEVISION AND
DVD/CD PLAYER
Owner’s Manual
MD13N3R
MD19N3
DIGITAL VIDEO
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the
information listed below which is for your own personal records.
Date of Purchase
Serial No.
:
:
:
Place of Purchase
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the
“CATV”(Cable Television) mode.
If not using CATV, set this menu option to the “TV” position.
Before operating the unit, please read this manual thoroughly.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
and to ensure reliable operation of the unit, and to protect it from overheating.
S3126A
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the respective pages on this Own-
er's Manual for their operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
(Continued)
IMPORTANT SAFEGUARDS
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-
ments for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
21. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
22. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
23. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
24. SOUND VOLUME
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
25. SOUND DISTORTION
Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.
26. HEADPHONES
When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-
ously with high volume sound, it may cause hearing damage.
27. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
28. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
29. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-
nected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
IMPORTANT RECYCLING INFORMATION
This product uses both Cathode Ray Tube (CRT) and other components that contain lead.
In your community there might be regulations that require you to dispose these materials
properly under environmental considerations. Please contact your local authorities, or the
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on discs
On handling discs
Structure of disc contents
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
Do not touch the playback side of the disc.
DVD video disc
DVD video disc
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
There may be discs that do not have these numbers.
clean.
Notes on copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
This device does not tape-record copy protected DVD
Video Discs.
The device is not to be used for copying copyrighted
content without the express written permission of the
copyright owner.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
Obtaining such permission is the sole responsibility of
the user.
spray for vinyl LPs. It may damage the disc.
This product incorporates copyright protection
On storing discs
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Before using your unit
IMPORTANT SAFEGUARDS .............................................. 3
Notes on discs...................................................................... 6
Contents............................................................................... 7
Parts and functions .............................................................. 8
Remote control..................................................................... 9
Power source ..................................................................... 10
Antenna connections.......................................................... 11
Cable TV connections ........................................................ 12
TV operation
Setting the language .......................................................... 13
TV operation....................................................................... 14
Closed captions.................................................................. 16
To memorize channels ....................................................... 17
Setting the V-Chip .............................................................. 19
Picture control adjustment.................................................. 22
Stereo and Second Audio Program (SAP) ......................... 23
Playback operation
Disc .................................................................................... 24
Preparation/Status display of disc/To turn off the PBC ...... 25
Playback procedure ........................................................... 26
Special playback ................................................................ 27
Advanced function
Zooming/Locating desired scene ....................................... 28
Repeat, Random and Program playback/Repeat A-B........ 29
Changing soundtrack language/Subtitles .......................... 30
Changing angles/Title selection/DVD menu....................... 31
Additional information
Setting language ................................................................ 32
Setting the aspect ratio of TV screen/Setting on screen
display ................................................................................ 33
Dynamic Range Control ..................................................... 34
Parental control setting ..................................................... 35
To change the parental level .............................................. 36
Temporary disabling of rating level by DVD disc ................ 37
Connections to other equipments ...................................... 38
Problems and troubleshooting ............................................. 40
Language code list ............................................................. 42
Reception disturbances...................................................... 43
Specifications ..................................................................... 44
Warranty............................................................................. 45
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and functions
Front
AUDIO (L/R)/VIDEO IN jacks (LINE)
STOP( ) button
Power indicator
POWER button
Disc tray
Headphone jack
) buttons
SKIP (
/
Remote sensor
PLAY ( ) button
OPEN/CLOSE ( ) button
CHANNEL ( / ) buttons
VOLUME ( / ) buttons
Rear
COAXIAL DIGITAL AUDIO OUT jack
RF IN jack
AC power cord
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Page
RECALL
Call TV information
Call DVD information
15
25
TV/DVD
POWER
0-9
Switch between TV/AV and DVD
Power On/Off
25
13,14,25
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
Direct channel selection of TV
Input setting
Enter a password
14,18
28,29
19,21,35~37
1
4
2
5
8
3
6
INPUT SELECT
GAME
Switch between TV/AV
39
Switch between TV/AV and GAME
Open or Close the tray
Sleep timer
39
26,37
15
OPEN/CLOSE
MUTE
OPEN/CLOSE
SLEEP
7
SLEEP
9
CLOSED
CAPTION
0
CLOSED CAPTION
Switch between TV/Caption/Text in
Closed Caption mode
16
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
MUTE
Switch off the sound
Select title
15
31
30
TOP MENU
SUBTITLE
AUDIO
Set Subtitle
CH +
Switch the sound of TV
Change sound track language
23
30
VOL –
VOL +
ANGLE
Change playback angle
31
SETUP/MENU
TV mode - Display menu of TV
13,17~22
RETURN
ENTER
CH –
DVD mode - Call up initial setup mode 32~36
DVD MENU
CANCEL
Display DVD menu
31
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
Reset information in the menu
19,22,28,35
ZOOM/CH RTN
Switch between present/last channel
Zoom
15
28
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
CH +/–
Select channel of TV
Cursor buttons
15
13,17~22
26,28,31~36
VOL +/–
Adjust volume of TV
Cursor buttons
14
13,17~22
26,28,31
RETURN
ENTER
Remove DVD set up menu
32~37
Enter information in the menu 13,19,21,26
28,29,31~37
FWD/REV
PLAY
Fast Forward/Review playback
27
26,27,29,31,37
29
Playback
PLAY MODE
SKIP
Select playback mode
Skip chapter to forward or reverse
direction
27
STOP
JUMP
SLOW
PAUSE
Stop
26
28
27
27
Locating desired scene
Forward/Reverse- slow motion
Pause CD sound
Still picture of DVD
REPEAT A-B
Repeat playback between A and B
29
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control/Power source
Inserting batteries
Slide the battery compartment
cover in the direction of the
arrow.
Install two “AAA” batteries
(supplied), paying attention to
the polarity diagram in the
battery compartment.
Replace the compartment
cover.
1
2
3
Operation
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30° angle on
either side of the remote sensor, up to a dis-
tance of Approx. 5 meters.
Approx. 5 meters
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery
manufacturer’s directions).
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
AC Outlet
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
Wider Hole
and Blade
NOTES:
Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
If the AC cord plug is plugged in for the first time, wait for about
5 seconds before pressing the POWER button.
•
•
•
•
Polarized AC Cord Plug
(One blade is wider than the other.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connections
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)
Connect the 75 ohm Cable from the Combination
VHF/UHF Antenna to the Antenna Jack.
Antenna
Jack
Antenna
Jack
If your Combination VHF/UHF Antenna has a 300
ohm Twin-lead Wire, the use of the 300-75 ohm
Matching Transformer may be necessary.
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300
300-75 ohm
Matching
Transformer
Antenna
Jack
ohm Twin-lead Wire to the 300-75 ohm Matching
Transformer. Attach the Transformer to the Com-
biner, then attach the Combiner to the Antenna
Jack.
Combiner
UHF 300 ohm
VHF 300 ohm
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the Combiner. Attach the Com-
biner to the Antenna Jack.
Antenna
Jack
VHF 75 ohm
Combiner
UHF 300 ohm
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler
Antenna
box, connect the CATV 75 ohm Coaxial Cable directly to the
Jack
Antenna Jack on the back of the TV/DVD.
75 ohm
Coaxial Cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually
channel 3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
CATV Cable
Antenna
Jack
75 ohm Cable to
TV/DVD
Converter/
Descrambler
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.
Converter/
Descrambler
Incoming
75 ohm
Antenna
Jack
75 ohm Cable
to TV/DVD
CATV Cable
A
A/B Switch
Splitter
B
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the language
You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adjustment menus and messages will appear in the language of your choice.
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU
button initially. Select the language you prefer first, then proceed with the other menu options.
To turn on the TV/DVD, press POWER. The Power indicator
will light.
1
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
Press MENU in the TV mode.
The TV menu screen will appear.
2
3
1
4
2
5
8
3
6
Press
or
until the OPTION
OPEN/CLOSE
MUTE
menu appears.
7
SLEEP
9
CLOSED
CAPTION
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Press
or
to select the
4
5
6
“LANGUAGE” option, then press
CH +
or
button.
VOL –
VOL +
ENTER
RETURN
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
Press
or
to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
Press MENU until the MENU
screen is cleared.
NOTES:
If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electricity,
etc., may affect the player's operation.
Disconnect theAC power cord once, then
connect it again.
•
The TV section has its own menu and also
DVD section has its own menu (see page
32).
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV operation
To turn on the TV/DVD, press
POWER.
1
2
Adjust the volume level by
pressing VOL + or –. The volume
level will be indicated on the
screen by green bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
VOLUME
32
1
4
2
5
8
3
6
Set the TV/CATV menu
option to the appropriate
position. (See page 17.)
3
4
TV
- VHF/UHF channels
CATV - CABLE TV channels
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
0
Press the Direct Channel selection
buttons to select the channel.
TOP MENU
SUBTITLE
AUDIO
ANGLE
CH 012
TV Mode Direct Channel Selection
When the TV/CATV menu option is
in the TV position, all channels can
be instantly selected by using two
buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
CH +
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.
VOL –
VOL +
ENTER
RETURN
CH –
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position, channels
can be selected as follows:
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
TO SELECT CATV CHANNELS:
SKIP
1-9:
Press “0” twice, then 1-9 as needed. Example, to select
channel 2, press “002”.
SLOW
PAUSE
SLOW
REPEAT A–B
10-12:
13-99:
Press “0”, then the remaining 2 digits. Example, to
select channel 12, press “012”.
Press the 2 digits in order. Example, to select channel
36, press “36”.
100-125: Press the 3 digits in order. Example, to select channel
120, press “120”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
CATV
TV
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
NOTES:
• If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
• If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
(5A)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL UP/DOWN
Press and release CH + or –. The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 17 and 18
“To memorize channels”.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
1
4
2
5
8
3
6
RECALL
STEREO SAP
CH 012
Press RECALL to display the
current informations on the screen.
Press RECALL again to clear the
call display.
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
SEL. MONO+SAP
0
• Channel number or VIDEO mode
• Stereo or SAP (Second Audio
Program) audio status
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
• Audio output status
CH RETURN
CH +
This button allows you to go back to
the last channel selected by pressing
CH RTN. Press CH RTN again to
return to the last channel you were
watching.
VOL –
VOL +
ENTER
RETURN
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
MUTE
SLOW
PAUSE
SLOW
REPEAT A–B
MUTE
Press MUTE to switch off the sound.
The TV/DVD’s sound will be silenced
and “MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of the VOL + or –
buttons.
SLEEP
SLEEP
120
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each press
of SLEEP (120, 110, ...10, 0). After the
sleep time is programmed, the display
will appear briefly every ten minutes
to remind you that the sleep timer is
operating. To confirm the sleep timer
setting, press SLEEP and the remain-
ing time will be displayed for a few sec-
onds. To cancel the sleep timer, press
SLEEP repeatedly until the display
turns to 0.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed captions
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Captions: This Closed Caption Mode will display text on the
screen in English or another language (depending on the set-
ting of the Closed Captions CH 1/2).
Generally, Closed Captions in English are transmitted on Cap-
tions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
1
4
2
5
8
3
6
Text: The Text Closed Caption Mode will usually fill the screen
with a programming schedule or other information.
After selecting a Closed Caption Mode, it will stay in effect until it
is changed, even if the channel is changed.
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
If the Captions signal is lost due to a commercial or a break in
the signal, the Captions will reappear when the signal is received
again. If the channels are changed, the Captions will be delayed
approximately 10 seconds. The Captions will appear in places
on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually
show three-line Closed Captions which scroll onto the screen.
Most other shows provide two or three lined Captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
CH +
VOL –
VOL +
ENTER
RETURN
For television programs broadcasting with Closed Captions, look
in your TV guide for the Closed Captions symbol (CC).
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
TO VIEW CLOSED CAPTIONS
Press CLOSED CAPTION to
switch between normal TV and the
two closed caption modes (cap-
tions and full screen text). Closed
captioning will display text on the
screen for hearing impaired
viewers.
NOTES:
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with
Closed Captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may
interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-
grammed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up
to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in the CATV mode.
TV/CATV SELECTION
Press MENU in the TV mode.
The TV menu screen will appear.
1
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
Press
menu appears.
or
until the SETUP
2
3
1
4
2
5
8
3
6
TV/CATV
ADD/DELETE
AUTO CH MEMORY
CATV
ADD
OPEN/CLOSE
MUTE
7
SLEEP
9
/
/
/
/MENU
<
>
CLOSED
CAPTION
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Press
CATV”.
or
to select the “TV/
TV/CATV
ADD/DELETE
CATV
ADD
AUTO CH MEMORY
CH +
/
/
/
/MENU
<
<
>
VOL –
VOL +
ENTER
RETURN
CH –
Press
or CATV mode.
or
to select the TV
4
5
TV/CATV
ADD/DELETE
AUTO CH MEMORY
TV
ADD
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
TV - VHF/UHF channels
CATV - CABLE TV channels
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
/
/
/
/MENU
>
Press MENU until the MENU
screen is cleared.
CATV CHART
The chart below is typical of many cable system channel allocations.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
To memorize channels
(Continued)
AUTOMATIC MEMORY TUNING
Press MENU in the TV mode. The TV menu
screen will appear.
1
2
Press
appears.
or
until SETUP menu
TV/CATV
ADD/DELETE
AUTO CH MEMORY
CATV
ADD
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
/
/
/
/MENU
<
>
Press
or
to select the “AUTO
3
4
1
4
2
5
8
3
6
CH MEMORY”, then press
The TV will begin memorizing all the
channels available in your area.
or
.
TV/CATV
ADD/DELETE
CATV
ADD
OPEN/CLOSE
MUTE
AUTO CH MEMORY
7
SLEEP
9
CLOSED
CAPTION
/
/
/
/MENU
<
>
Press MENU until the MENU screen
is cleared.
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
TO ADD/DELETE CHANNELS
Select the desired channel to be
memorized or deleted using Direct
Channel Selection (0-9), or CH + or –.
1
CH +
VOL –
VOL +
ENTER
Press MENU. The TV menu
screen will appear.
2
RETURN
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
3
4
5
Press
appears.
or
until SETUP menu
TV/CATV
ADD/DELETE
AUTO CH MEMORY
CATV
ADD
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
/
/
/
/MENU
<
>
Press
DELETE”.
or
to select the “ADD/
TV/CATV
ADD/DELETE
CATV
ADD
AUTO CH MEMORY
/
/
/
/MENU
<
>
Press
or
to select “ADD” or
“DELETE”, whichever function you
want to perform.
TV/CATV
CATV
ADD/DELETE
DELETE
AUTO CH MEMORY
/
/
/
/MENU
<
>
Press MENU until the MENU screen
is cleared.
6
7
Repeat steps 1-6 for other channels
you want to add or delete.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the V-Chip
An age limitation can be set to forbid children to watch programs according to “TV RATING” and
“MOVIE RATING”. To use the V-Chip function, you must register a password.
TO REGISTER PASSWORD
Press MENU in the TV mode. The TV menu
screen will appear.
1
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
Press
menu appears.
or
until the OPTION
2
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
1
4
2
5
8
3
6
/
/
/
/MENU
OPEN/CLOSE
MUTE
<
>
7
SLEEP
9
CLOSED
CAPTION
0
3
Press
or
to select the “V-
or
TOP MENU
SUBTITLE
AUDIO
ANGLE
CHIP SET”, then press
.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
/
/
/
/MENU
<
>
CH +
VOL –
VOL +
ENTER
Enter the password (4 digits)
4
5
using Direct Channel Selection
(0-9), then press ENTER.
• If you put a wrong number,
press CANCEL.
RETURN
CH –
V-CHIP SET
NEW
PASSWORD
:
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
0
9/ENTER/CANCEL/MENU
<
>
SKIP
“ ” appears instead of the number.
SLOW
PAUSE
SLOW
REPEAT A–B
Enter the same password again
for the safety, then press ENTER.
Now the password was registered
and V-Chip setting menu will
appear on the display.
V-CHIP SET
CONFIRM
PASSWORD
:
0
9/ENTER/CANCEL/MENU
<
>
NOTES:
If you forget the password, you can-
not set the V-Chip.
•
To avoid forgetting the password, write
it down and keep in the safe place.
•
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the V-Chip
(Continued)
TO SET THE V-CHIP
In the V-CHIP SET menu, press
1
or
to select the “TV
RATING”.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
Press
desired setting.
OFF
TV-Y :
TV-Y7 :
TV-G :
TV-PG:
TV-14 :
TV-MA:
or
to display the
2
1
4
2
5
8
3
6
:
TV RATING is not set
All children
7 years old and above
General Audience
Parental guidance
14 years old and above
17 years old and above
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press
RECALL to show the contained rating. Press
/
or
/
to select the desired item you want.
CH +
Press
“MOVIE RATING”.
or
to select the
3
4
VOL –
VOL +
ENTER
RETURN
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
Press
rating.
or
to select desired
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
OFF
G
PG
:
:
:
MOVIE RATING is not set
All ages
Parental guidance
PG-13 : Parental guidance
less than 13 years old
Under 17 years old
R
:
Parental guidance suggested
NC-17 : 17 years old and above
X
:
Adult only
Press
CHIP”.
or
to select “V-
5
6
7
To use after the TV is protected
When the program applied to the V-
Chip setting is received, enter the
password. Protection can be canceled.
Press
or
to Display “ON”.
Now your settings were set into
the memory.
NOTE:
The V-Chip function is activated only
on programs and tapes that have the
rating signal.
Press MENU until the MENU
screen is cleared.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CHANGE PASSWORD
Press MENU in the TV mode. The TV menu
screen will appear.
1
2
Press
or
until OPTION
menu appears.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
/
/
/
/MENU
<
>
1
4
2
5
8
3
6
Press
CHIP SET”, then press
or
to select the “V-
3
or
.
OPEN/CLOSE
MUTE
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
7
SLEEP
9
CLOSED
CAPTION
0
/
/
/
/MENU
<
>
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Enter the Password using Direct
Channel Selection (0-9), then
press ENTER.
• If you put a wrong number,
press CANCEL.
4
5
6
CH +
VOL –
VOL +
ENTER
RETURN
CH –
Press
“CHANGE PASSWORD”, then
press or
or
to select
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
.
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
Enter the new password using
Direct Channel Selection (0-9),
then press ENTER.
Enter the same password again
for safety, then press ENTER.
7
8
Press MENU repeatedly to
return to normal screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture control adjustment
Picture controls are factory preset but you can adjust them individually as follows:
Press MENU in the TV mode. The TV menu screen will
appear.
1
Press
or
until PICTURE
2 menu appears.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
BRIGHTNESS
CONTRAST
COLOR
0
+32
0
1
4
2
5
8
3
6
TINT
0
SHARPNESS
0
/
/
/
/MENU
<
<
>
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
Press
you want to adjust.
or
to select the item
3
4
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
0
+32
0
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
0
0
/
/
/
/CANCEL/MENU
>
CH +
Press
or
to adjust the setting.
VOL –
VOL +
ENTER
RETURN
Selection
Pressing
CH –
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
darker
lower
paler
reddish
softer
lighter
higher
deeper
greenish
sharper
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
After your desired setting press MENU until the MENU screen
is cleared.
5
CANCEL
Pressing CANCEL while making picture adjustments will return
all adjustments to the factory preset levels.
NOTE:
The CONTRAST default setting is set
to maximum at the factory.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo and Second Audio Program (SAP)
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly
enhance TV viewing by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a
channel selection is made, make
STEREO
CH 013
certain the STEREO appears on
the screen. This means that
“Stereo” broadcasting is avail-
able. You can enjoy stereo
sound from the left and right
speakers.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
1
4
2
5
8
3
6
• When “Mono” broadcasting is
received, no indication is
displayed.
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
0
• If the broadcast signal is not
strong enough or clear stereo
sound is not available, press
AUDIO to change to mono
sound. The noise should be
eliminated. Press it again to
return to the stereo sound.
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
CH +
LISTENING TO SAP (SECOND AUDIO PROGRAM)
VOL –
VOL +
ENTER
When the TV is turned on or a
channel selection is made, make
RETURN
STEREO SAP
CH 013
CH –
certain the SAP appears on the
screen. This means that the
“Second Audio Program” broad-
casting is available.
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
TO SELECT DESIRED SOUND
Press AUDIO to select the
desired sound.
SEL. STEREO
MONO+SAP BROADCASTING
MONO SOUND
(MAIN)
MONO + SAP SOUND
(MONO)
SAP SOUND
STEREO+SAP BROADCASTING
STEREO SOUND
(MAIN)
SAP SOUND
MONO SOUND
(MAIN)
MONO + SAP SOUND
(MAIN)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of
this TV/DVD. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the TV/DVD may not respond to all
operating commands. This is not a defect in the TV/
DVD. Refer to instruction notes of discs.
This TV/DVD can play the following discs.
Maximum
Disc
Size
Disc Mark
Contents
playback time
Approx. 4 hours
(single sided disc)
12 cm
Audio
+
video
(moving
pictures)
“
” may appear on the TV screen during operation.
Approx. 8 hours
(double sided disc)
A “ ” means that the operation is not permitted by the
TV/DVD or the disc at the moment.
For example, it is unable to stop the playback of
copyright message of the disc when the STOP (
button is pressed. Alternatively, the “ ” may also
indicate that the feature is not available for the disc.
DVD
video
discs
Approx. 80 minutes
(single sided disc)
)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
Approx. 74 minutes
Approx. 20 minutes
12 cm
Audio
+
video
(moving
pictures)
The region number of this TV/DVD is 1. If region
numbers, which stand for their playable area, are printed
on your DVD video disc and you do not find
disc playback will not be allowed by the player. (In this
case, the TV/DVD will display a message on-screen.)
Video
CDs
ALL
1
or
,
DIGITAL VIDEO
8 cm
Approx. 74 minutes
Approx. 20 minutes
12 cm
On Video CDs
Audio
CDs
Audio
This TV/DVD supports Video CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
8 cm
(CD
single)
The following discs are also available.
CD-R
CD-RW
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this TV/DVD in the
same way as an audio CD.
CD-R/RW discs recorded by CD-DA method can be
played. Some CD-R/RW discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-RW, etc., or non
standardized discs even if they may be labeled as above.
• This TV/DVD uses the NTSC color system, and cannot play
DVD video discs recorded in any other color system (PAL,
SECAM, etc.).
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation/Status display of disc/To turn off the PBC
The following pages describe the
setup/operation in DVD mode.
Preparation
Before DVD/CD operation, please make preparations as follows.
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
1
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
about 5 seconds before pressing POWER.
1
4
2
5
8
3
6
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
OPEN/CLOSE
MUTE
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
2
3
7
SLEEP
9
CLOSED
CAPTION
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
• When using an amplifier, switch on the amplifier.
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Press TV/DVD to select DVD
mode.
welcome
The DVD startup screen will ap-
pear on the screen.
CH +
VOL –
VOL +
ENTER
RETURN
CH –
Status display of disc
Press RECALL. The status display of the disc will appear on the
screen.
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
DVD
SKIP
Title number
Title elapsed playing time
SLOW
PAUSE
SLOW
REPEAT A–B
Chapter number Title total time
Disc operation
1/8
C
1/19
T
0:07:18 2:02:31
1/8 Eng 1/1
Camera angle
1/8 Eng DolbyDigital
Subtitle language
Audio language
A kind of audio
• To make status display disappear, press RECALL again.
Audio CD/Video CD
PBC (PlayBack Control) on Video CD
Track elapsed playing time
Disc operation
PBC
1 / 8
Track total time
T
0:02:31 0:53:09
NOTE:
Track number
Play list
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again.
Playlist
1
2
3
4
5
6
7
8
• When you play the CD disc, the status display will appear
on the screen and continue displaying.
• When you play the Video CD, Play list will not appear on
the screen.
To turn off the PBC
Press Number button 1 in the stop mode, then press ENTER.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback procedure
Press OPEN/CLOSE on
the unit or the remote con-
trol.
1
The disc tray will open.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
1
4
2
5
8
3
6
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
2
3
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Press OPEN/CLOSE or
PLAY.
The disc tray closes auto-
matically.
CH +
VOL –
VOL +
ENTER
On the TV screen, “
”
changes to “ ” and then
playback commences.
RETURN
CH –
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
Press
/
or
/
to make a selection.
4
5
NOTES:
• If a non-compatible disc is loaded, “Incor-
rect Disc”, “Region Code Error” or “Paren-
tal Error” will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
24 and 35).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the unit,
Press ENTER.
• Title is selected and play commences.
Press STOP to end playback.
6
Resuming facility
• The unit memorizes the stopped point and “ ” appears
on the screen. Press PLAY to resume playback (from
the scene point).
Resuming cannot function when you play PBC-featured
Video CD while the PBC is on. To turn off the PBC, see
page 25.
“
” will appear on the display and then
“No Disc” or “Incorrect Disc” will be displayed.
• Some discs may not work the resuming
facility.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features
may not be available. Also refer to the in-
structions supplied with the DVDs.
• If you press STOP again or unload the disc (“ ” appears
on the screen.), the unit will clear the stopped point.
To stop the playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc then press POWER.
The disc tray closes automatically and unit turns off.
7
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Special playback
Note: There may be a slight delay be-
tween when you press the button and
the function activating.
Fast forward playback
Press FWD during normal playback.
Each press of FWD will increase the speed of the search
[x 2],
(CD:
[x 4],
[x 8],
[x 15].
[x 20])
[x 2],
[x 4],
[x 8],
• To resume normal playback, press PLAY.
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
1
4
2
5
8
3
6
Review playback
Press REV during normal playback.
OPEN/CLOSE
MUTE
Each press of REV will increase the speed of the search
[x 2], [x 4], [x 8], [x 15].
(CD: [x 20])
7
SLEEP
9
CLOSED
CAPTION
[x 2],
[x 4],
[x 8],
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
• To resume normal playback, press PLAY.
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Still playback
Press PAUSE during normal
playback to pause playback.
CH +
VOL –
VOL +
ENTER
RETURN
CH –
• To resume normal playback,
press PLAY.
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
Frame advance
SLOW
PAUSE
SLOW
REPEAT A–B
Press PAUSE during still playback.
One frame is advanced each time you press PAUSE.
• To resume normal playback, press PLAY.
Slow-motion playback
Press SLOW
(
)
Reverse or SLOW
(
)
Forward during
normal playback or still playback.
Each press of SLOW will change the speed of the slow x1/2,
x1/4, x1/6, x1/8.
NOTE: The Video CD can not play Reverse SLOW.
NOTE:
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE.
The unit is capable of holding a still video
image or On screen display image on your
television screen indefinitely. If you leave
the still video image or On screen display
image displayed on your TV for an ex-
tended period of time, you risk permanent
damage to your television screen. Pro-
jection televisions are very susceptible.
Locating a chapter or track
Press SKIP(
) Forward or SKIP(
) Reverse during
playback to locate a chapter or track that you want to watch.
• Press SKIP(7) briefly to select the next chapter/track.
• Press SKIP(6) briefly to return to the beginning of
the current chapter/track.
• Press SKIP(6) twice in quick successions to select
the previous chapter/track.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming/Locating desired scene
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
Press TV/DVD to select
DVD mode.
Press ZOOM during
playback.
1
1
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM 1(x 2),
2 (x 3) and 3 (x 4).
Press
/
/
/
to view a different part of the frame.
2
3
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
1:1 view ( Off).
Locating desired scene
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
Press JUMP during play-
back.
1
C
T
Press
Track)” or “
or
to select the “
(Time)”.
C
(Chapter)”, “
T
(Title/
2
3
Press Number buttons (0–9) to input the number.
NOTES:
• If you input a wrong number, press CANCEL.
• You can select the Pause, Slow or
Search playback in the zoom mode.
• Some discs may not respond to zoom
feature.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
4
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat, Random and Program playback/Repeat A-B
Press PLAY MODE during playback or stop mode.
Each time you press PLAY MODE, playback mode changes as follows.
DVD
Audio CD/Video CD
On screen
display
Title:
On screen
display
Operation
Operation
Repeats entire disc.
→
Repeats the current title.
→
All:
↓
↓
Track:
Repeats the current track.
Resumes normal playback.
Chapter: Repeats the current chapter.
↓
Off:
↓
↓
Off:
Resumes normal playback.
Random Play: Plays the tracks in random order.
• During stop mode, PLAY MODE key is not effective.
↓
*Program:
Plays the tracks in program order.
↓
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
(Status display): Resumes normal playback.
• During stop mode, you can not select “
Track”.
• For Audio CD discs, “ Off” does not appear.
CH +
• Random playback and Program playback do not func-
tion on the Video CD.
VOL –
VOL +
ENTER
*Program menu
RETURN
Use number buttons (0–9) to
enter the track’s number you
want to program, then press
ENTER. The track number and
total time are displayed. Repeat
this step to enter additional
tracks. When you have finished
entering tracks, press PLAY to
start Program playback.
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
Program Playback
0:02:31 0:08:29
A playlist of your programmed
tracks is displayed.
5 / 8
T
NOTES:
• If you put a wrong number, press CANCEL.
• To cancel program play, press STOP 3 times.
Playlist
5
8
3
• To clear the programs on the program menu, press CANCEL until all programs
will be cleared.
• The program is canceled when you open the disc tray or turn off the power.
Repeat A-B
Repeat A-B playback allows you to repeat material between two selected points.
Press REPEAT A-B during playback.
The start point is selected.
1
A
Press REPEAT A-B again.
The end point is selected. Playback starts at the point that you selected. Playback
stops at the end point, returns to Point A automatically, then starts again.
2
A B
To resume normal playback press REPEAT A-B again.
“
Off” appears on the screen.
NOTES:
• Some discs may not work with the repeat operation.
• In Repeat A-B mode, subtitles near point A or B may not appear.
• You may not be able to set Repeat A-B, depending on the scenes of the DVD.
• Repeat A-B does not work with interactive DVDs.
• Repeat & Repeat A-B function is prohibited when PBC is on.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing soundtrack language/Subtitles
Changing soundtrack language
You can select the language when you play a multilingual
disc.
Press AUDIO during play-
back.
1
2/8 Fra Dolby Digital
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
The current soundtrack
language will appear.
1
4
2
5
8
3
6
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
Press AUDIO repeatedly
until the desired language
is selected.
2
0
1/8 Eng Dolby Digital
TOP MENU
SUBTITLE
AUDIO
ANGLE
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
The on-screen display will
disappear after a few sec-
onds.
CH +
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
VOL –
VOL +
ENTER
RETURN
CH –
LR
L
R
➡
➡
NOTES:
• If the desired language is not heard af-
ter pressing the SUBTITLE button sev-
eral times, the language is not recorded
on the disc.
• Changing soundtrack language is can-
celled when you open the disc tray. The
initial default language or available lan-
guage will be heard if the disc is played
back again.
Subtitles
Turning the Subtitles On and Off
When playing back a disc recorded with subtitles, you
can turn the subtitles on or off.
Press SUBTITLE during play-
back until “Off” appears.
Off
• Changing subtitle language is canceled
when you open the disc tray.
• Some functions may not work on some
DVDs. You may not be able to turn sub-
titles on or off or change subtitles. While
playing the DVD, the subtitle may
change when:
Changing the subtitle language
You can select the language when playing back a disc
recorded with multilingual subtitles.
- you open or close the disc tray.
- you change the title.
• In some cases, the subtitle language is
not changed to the selected one imme-
diately.
Press SUBTITLE repeat-
edly during playback until
your desired language ap-
pears.
1
1/32 Eng
The on-screen display will disappear after a few seconds.
2
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing angles/Title selection/DVD menu
Changing angles
When playing back a disc recorded with multi-angle facil-
ity, you can change the view angle.
Press ANGLE during play-
back.
1
1/9
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
The current angle will ap-
pear.
1
4
2
5
8
3
6
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
Press ANGLE repeatedly until the desired angle is selected.
2
0
TOP MENU
SUBTITLE
AUDIO
ANGLE
Title selection
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
Two or more titles are recorded on some discs. If the title
menu is recorded on the disc, you can select the desired
title.
CH +
Press TOP MENU during playback.
Title menu appears on the screen.
1
VOL –
VOL +
ENTER
RETURN
CH –
Press
/
or
/
to select the desired title.
2
3
Press ENTER or PLAY.
The playback of the selected title will start.
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
DVD menu
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the sub-
titlelanguageandsoundtracklanguage,etc. usingtheDVD
menu.
Press DVD MENU during playback.
The DVD menu appears on the screen.
1
• Press DVD MENU again to resume playback at the scene
when you pressed DVD MENU.
NOTES:
• Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the DVD.
• Depending on the DVD, you may not
be able to select the title. Depending
on the DVD, a “title menu” may simply
be called a “menu” or “title” in the in-
structions supplied with the disc.
Press
/
or
/
to select the desired item.
2
3
Press ENTER.
The menu continues to another screen. Repeat steps 2
and 3 to set additional items if any.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting language
You can change the default settings
to customise performance to your
preference.
Press TV/DVD to select
DVD mode.
Press SETUP in the stop
mode.
1
2
3
Main Menu
Language
Picture
Sound
Press
or
to select
Parental
“Language”, then press
or ENTER.
/Enter/Setup/Return
Press
or
to select
Language
“OSD Language”, then
OSD Language
Menu
Audio
English
English
English
English
press
or ENTER.
Subtitle
/Enter/Setup/Return
Press
or
to select de-
OSD Language
sired language (e.g. Eng-
lish), then press ENTER.
The menu returns to “Lan-
guage” menu automatically.
English
Francais
Espanol
/Enter/Setup/Return
• If you want to return to the
previous menu, press
or RETURN.
Repeat steps 2-3 for other “Language” setting.
4
5
Other: (Menu/Audio/Subtitle)
If you want to select another language, enter the language
code with number buttons (0–9) (see the “Language code
list” on page 42).
Off: (Subtitle)
Subtitles do not appear.
Press SETUP to remove the Menu screen.
NOTES:
• If the selected soundtrack language is
not recorded on the disc, the original
language will be heard.
• If the selected subtitle language is not
recorded on the disc, the first-priority
language is selected.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the aspect ratio of TV screen/Setting on screen display
Setting the aspect ratio of TV screen
You can select the aspect ratio for your TV.
Press TV/DVD to select
DVD mode.
Press SETUP in the stop
mode or No Disc.
Main Menu
1
Language
Picture
Sound
Press
or
to select
Parental
RECALL
TV/DVD
POWER
INPUT SELECT
GAME
“Picture”, then press
or
/Enter/Setup/Return
ENTER.
1
4
2
5
8
3
6
Press
“TV Screen”, then press
or ENTER.
or
to select
Picture
2
3
TV Screen
Display
4:3
On
OPEN/CLOSE
MUTE
7
SLEEP
9
CLOSED
CAPTION
Press
or
to select
TV Screen
0
your desired screen type,
then press ENTER.
16:9
4:3
TOP MENU
SUBTITLE
AUDIO
ANGLE
4:3
SETUP/MENU DVD MENU
CANCEL ZOOM/CH RTN
You have the following screen sizes to choose from:
16:9 Wide screen
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
CH +
4:3
Letterbox
VOL –
VOL +
ENTER
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
RETURN
CH –
REV
PLAY
STOP
FWD
SKIP
PLAY MODE
JUMP
4:3
Panscan
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
SKIP
SLOW
PAUSE
SLOW
REPEAT A–B
• If you want to return to the previous menu, press
or
RETURN.
Press SETUP to remove the Menu screen.
4
Status on screen display
On screen display can be switched on or off when you
press the buttons.
Press SETUP in the stop mode or No Disc.
1
Press
or
to select “Picture”, then press
or ENTER.
Picture
Press
or
to select
2
“Display”.
Press
TV Screen
Display
4:3
On
NOTE:
If the DVD disc is not formatted in the pan
& scan style, it displays 4:3 style.
or ENTER to se-
Picture
3
lect “On” or “Off”.
TV Screen
Display
4:3
Off
On: On screen displays appear when you press the
buttons (factory setting).
Off: On screen displays do not appear when you press
any buttons.
• If you want to return to the previous menu, press
or
RETURN.
33
Press SETUP to remove the Menu screen.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic Range Control
DRC (Dynamic Range Control) ena-
bles you to control the dynamic range
so as to achieve a suitable sound for
your equipment.
Press TV/DVD to select
DVD mode.
Press SETUP in the stop
mode.
Main Menu
Language
1
Picture
Sound
Press
or
to select
Parental
“Sound”.
/Enter/Setup/Return
Press
lect “DRC”.
or ENTER to se-
Sound
DRC
2
3
On
/Enter/Setup/Return
Sound
DRC
Press
lect “On” or “Off”.
or ENTER to se-
Off
/Enter/Setup/Return
• If you want to return to the previous menu, press
or
RETURN.
Press SETUP to remove the Menu screen.
4
NOTES:
• This function works only during play-
back of Dolby Digital recorded discs.
• The level of Dynamic Range Reduction
may differ depending on DVD video
disc.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control setting
Some discs are specified not suitable
for children. Such discs can be limited
not to play back with the unit.
Press TV/DVD to select
DVD mode.
Press SETUP in the stop
mode.
1
Main Menu
Language
Picture
Sound
Press
or
to select
Parental
“Parental”, then press
or
ENTER.
/Enter/Setup/Return
Press
or
to select
Parental
2
3
“Parental Level”, then press
Password
Parental Level
Off
Off
or ENTER.
Press
or
to select a
level from Off or 1–8. Press
or ENTER to set the
selected level.
• Level Off: The parental control setting does not func-
tion.
• Level 8: Almost all DVD software can be played back.
• Level 1: DVD software for adults cannot be played
back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
Press
or
to select
Parental
4
5
“Password”, then press
or ENTER.
Password
Parental Level
Off
1
Press number buttons (0–
9) for the password.
Don’t forget the password.
• If you input a wrong
number, press CANCEL.
Password
Password
1234
NOTES:
Press ENTER to store the
password.
Note: Now the rating is
locked and the setting can-
not be changed unless you
enter the correct password.
6
Parental
• If each setup (pages 32~36) has been
completed, the unit can always be
worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the
memory when you turn the power off.
• Depending on the discs, the unit can-
not limit playback.
Password
Parental Level
On
1
• If you want to return to the previous menu, press
RETURN.
or
• Some discs may not be encoded with
specific rating level information though
its disc jacket says “adult.” For those
discs, the age restriction will not work.
Press SETUP to remove the parental control screen.
7
35
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the parental level
Press TV/DVD to select DVD mode.
Press SETUP in the stop mode or No Disc.
1
2
3
Press
or
to select “Parental”, then press
or EN-
TER.
Press
“Password”, then press
or ENTER.
or
to select
Parental
Password
Parental Level
On
1
Press number buttons (0–
9) to enter the password
you have stored.
Password
Password
1234
• If you input a wrong number, press CANCEL.
Press ENTER.
The password is now Off.
Parental
4
5
Password
Parental Level
Off
1
Press
“Parental Level”. Then
press or ENTER. The
or
to select
Parental
Password
Parental Level
Off
1
Parental Level screen is
displayed.
Press
or
to select a
Parental Level
6
level from Off or 1–8 and
then press
3
4
5
6
7
8
or ENTER.
/Enter/Setup/Return
Press
or
to select
Parental
7
8
“Password” and then press
Password
Parental Level
Off
8
or ENTER.
Press number buttons (0–
9) to enter a 4-digit pass-
word.
Password
Password
9876
Note: You can enter a new password.
NOTE:
Press ENTER.
The parental level is now
changed and locked.
Parental
9
Do not forget the password. If you forget
the password, contact the dealer that you
purchased the unit from.
Password
Parental Level
On
8
• If you want to return to the previous menu, press
or
RETURN.
Press SETUP to remove the parental control screen.
10
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc
Load a DVD disc and press
1
may try to temporarily cancel the
PLAY (see page 26).
rating level that you have set.
It is up to you to decide whether to
cancel the rating level or not.
If the DVD disc has been designed to temporarily cancel
2
the Rating level, the screen which appears after inserting
a DVD will change, depending on which disc is played. If
you select “YES” with the ENTER key, “Your disc exceeds
the parental control level.” screen will then appear.
Your disc exceeds the parental control level.
Password
Enter/0
—
9/Cancel/Return
If you wish to cancel the set rating level temporarily, enter
the 4-digit password.
Then press ENTER.
Alternatively, if the password has not been set, playback
will commence. If you don’t know (or have forgotten) the
password, select “STOP”.
The setting screen will disappear. Press OPEN/CLOSE to
remove the disc.
3
4
To quit entering, press RETURN.
Playback will commence if the entered password was cor-
rect.
NOTE:
This temporary cancellation of rating level
will be kept until the disc is ejected.
When the disc is ejected, the original rating
level will be set again automatically.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to other equipments
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-
ent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as
shown below.
Front
Speaker
(Right)
Subwoofer
Rear of TV/DVD
TV/DVD
Front
Speaker
(Left)
UHF/
VHF
Coaxial Digital
Audio Output
Center Speaker
Coaxial digital cable (not supplied)
To Coaxial Digital Audio Input
Surround
Speaker (Left)
Surround
Speaker
(Right)
AV Amplifier with built-in digital surround
decoder as listed above
*
*
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
NOTES:
•
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be
damaged.
•
•
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the audio/video inputs
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.
Press INPUT SELECT repeatedly to select the desired mode.
“LINE” or TV channel will display on the screen for 4 seconds.
NOTE:
In the DVD mode this key will not operate.
1. To connect the TV/DVD to a VCR
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
VCR
Front of TV/DVD
VIDEO IN
AUDIO IN (R)
AUDIO IN (L)
To Audio/Video
OUT
2. To connect the TV/DVD to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder
Front of TV/DVD
VIDEO IN
To Audio/Video OUT
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
3. To connect the TV/DVD to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game
Front of TV/DVD
VIDEO IN
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cord (not supplied)
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.
Game timer function: After one hour the Game timer display will appear every 30 minutes for about 5 seconds
showing how long the time has passed up to 4 hours.
NOTES:
• You can also change the TV screen to LINE by pressing INPUT SELECT. But this screen is normal.
•
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different
types of signal generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for
additional information.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer
or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
POWER
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
10
TV/DVD does not operate.
TV BROADCAST RECEPTION
• Station or CATV experiencing problems, tune to another station. 14
Poor sound or No sound
• Check Volume adjustments.
• Check for sources of possible interference.
14
43
14
11,12
43
• Station or CATV experiencing problems, tune to another station.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
Poor picture or No picture
22
• Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive weaker station. 11,12
• Check for sources of possible interference.
43
14
Poor reception on some channels
• Station or CATV experiencing problems, tune to another station. 14
• Make sure channels are set into memory.
• Check picture control adjustments.
18
22
Poor color or no color
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
11,12
43
14
18
–
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Check antenna orientation.
• Check all CATV connections.
Picture wobbles or drifts
No CATV reception
11
12
17
14
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
Horizontal or diagonal bars on
screen
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
11,12
43
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
17
11
No reception above channel 13
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
18
15
–
TV shuts off
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or ro-
tate antenna.
• Press CLOSED CAPTION button to turn on the closed caption
decoder.
14
11,12
16
Closed - Caption is not activated.
Display is not shown in your
language.
• Select proper language in the menu options.
13
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
26
6
–
Playback doesn’t start.
No picture
• TV/DVD selector is not set correctly.
25
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Select the correct Audio Output position on AV amplifier.
–
27
38
No sound
Picture is distorted during CUE or • The picture will be distorted occasionally.
REVIEW.
–
Stopping playback, search, slow-
motion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
No 4:3 (16:9) picture
No on-screen display
No surround sound
• The setup does not match your TV.
• Select Display On.
33
33
38
• The setup does not match your stereo system.
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several min-
utes, then replug it.
–
Playback does not start when the
title is selected.
• Check the RATING LEVEL setup.
35~37
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
32
30
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
No subtitle
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
31
–
“
” appears on the screen.
REMOTE CONTROL
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
The remote control does not
function.
10
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Audio” and/or “Subtitle” (see page 32).
Language name Code Language name Code Language name Code Language name Code
Abkhazian
Afar
1112 Fiji
1620 Lingala
1619 Lithuanian
1628 Macedonian
1635 Malagasy
1722 Malay
2224 Singhalese
2230 Slovak
2321 Slovenian
2317 Somali
2329 Spanish
2322 Sundanese
2330 Swahili
2319 Swedish
2328 Tagalog
2325 Tajik
2919
2921
2922
2925
1529
2931
2933
2932
3022
3017
3011
3030
3015
3018
1225
3019
3025
3028
3021
3033
3121
3128
3136
3219
3225
1335
3325
3418
2019
3525
3631
1111 Finnish
1116 French
2927 Frisian
1123 Galician
1128 Georgian
1835 German
1129 Greek
1135 Greenlandic
1136 Guarani
1211 Gujarati
1531 Hausa
Afrikaans
Albanian
Amharic
Arabic
2111 Malayalam
1415 Maltese
1522 Maori
Armenian
Assamese
Aymara
2122 Marathi
1724 Moldavian
1731 Mongolian
1811 Nauru
Azerbaijani
Bashkir
2324 Tamil
Basque
2411 Tatar
Bengali; Bangla 1224 Hebrew
1933 Nepali
2415 Telugu
2425 Thai
Bhutani
Bihari
1436 Hindi
1819 Norwegian
1831 Oriya
1218 Hungarian
1228 Icelandic
1217 Indonesian
2335 Interlingua
1215 Irish
2528 Tibetan
2611 Tigrinya
Breton
1929 Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
1924 Pashto, Pushto 2629 Tonga
1911 Persian
1711 Polish
1611 Turkish
2622 Turkmen
2630 Twi
2123 Italian
1930 Portuguese
2011 Quechua
1311 Japanese
3618 Javanese
1325 Kannada
1828 Kashmiri
1329 Kazakh
1411 Kirghiz
2422 Korean
1524 Kurdish
1525 Laothian
1530 Latin
2731 Ukrainian
2033 Rhaeto-Romance2823 Urdu
2124 Romanian
2129 Russian
2121 Samoan
2135 Sanskrit
2125 Scots Gaelic
2131 Serbian
2825 Uzbek
2831 Vietnamese
2923 Volapük
2911 Welsh
1714 Wolof
Danish
Dutch
English
2928 Xhosa
Esperanto
Estonian
Faroese
2225 Serbo-Croatian 2918 Yiddish
2211 Shona
2924 Yoruba
2914 Zulu
1625 Latvian, Lettish 2232 Sindhi
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable
TV system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is
the direct path and the other is reflected by tall buildings, hills or other
large objects. Changing the direction or position of the antenna may
improve the reception.
SNOW
If the TV/DVD is located far from the TV station, in a fringe reception
area where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a
loss of contrast in the picture. Changing the direction and position of
the antenna or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST
or BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
Power supply:
Power consumption:
MD13N3R
AC 120 V 60 Hz
Operation: 75 W
MD19N3
Operation: 90 W
Standby: 5 W
Standby: 5 W
Weight:
24.3 lbs (11.0 kg)
47.4 lbs (21.5 kg)
Dimensions:
Width : 14-1/4 inches (362 mm)
Height : 15-1/16 inches (382 mm)
Depth : 14-3/8 inches (365 mm)
Width : 19-1/4 inches (489 mm)
Height : 19-1/8 inches (486 mm)
Depth : 18-5/16 inches (465 mm)
Operating temperature: 5°C - 40°C
Operating humidity:
Less than 80%
TELEVISION
Picture tube:
Type 13 (335 mm diagonal)
Type 19 (480 mm diagonal)
Tuner type:
Quartz PLL Frequency Synthesized
Receiving channels:
VHF
2-13
UHF
CATV
14-69
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
Antenna input:
Speaker:
VHF/UHF In 75 ohm coaxial
1-1/2” x 2-11/16” (38 mm x 68 mm), 8 ohm x 2 3” (76 mm), 8 ohm x 2
Audio output power:
DVD/CD player
Signal system:
Applicable disc:
1.5 W + 1.5 W
2.5 W + 2.5 W
NTSC
1. DVD (12 cm, 8 cm)
2. CD (12 cm, 8 cm)
Frequency response:
Input:
DVD: 4 Hz - 22 KHz
CD: 4 Hz - 20 KHz
Video : (RCA) 1 V (p-p)/75 ohm
Audio : (RCA) –8 dBm/50 kohm
0.5 Vp-p 75 ohms terminated
Remote control x 1
Digital audio out:
ACCESSORIES:
Batteries (2 x AAA)
300 - 75 ohm Matching Transformer
44
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION
AND DVD/CD PLAYER
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following limited
warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set
as a gift from the original consumer purchaser and to no other purchaser or transferee .
Limited Ninety (90) Day Warranty
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of
ninety (90) days after the date of original retail purchase. During this period, TACP and THI will repair a defec-
tive product or part, without charge to you. You must deliver the entire set to an Authorized TACP/THI Service
Station. You pay for all transportation and insurance charges for the set to and from the Service Station.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of
one year after the date of original retail purchase. During this period TACP/THI will replace a defective part
without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original
retail purchase you pay labor charges involved in the replacement. You must also deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible for all transportation for the set to and from the
Service Station.
Limited Two (2) Year Warranty of Picture Tube
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a
period of two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a
defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90)
days from the date of the original retail purchase, you pay labor charges involved in the replacement. You are
responsible for all charges involved in the replacement. you are responsible for all transportation and insurance
charges for the set to and from the Service Station.
Rental Units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental
firm, whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture
tube.
Owner's Manual and Demographic Card
You should read this owner's manual thoroughly before operating this product. You should complete and mail
the enclosed Demographic card within ten days after you, or the person who has given you this product as a
gift, purchased this product. This is one way to enable TACP/THI to provide you with better customer service
and improved products. Failure to return the Demographic card will not affect your rights under this warranty.
Your Responsibility
The above warranties are subject to the following conditions:
( 1 ) You must retain your bill of sale or provide other proof of purchase.
( 2 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.
( 3 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.
( 4 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair
of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna
systems are your responsibility.
( 5 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power,
improper installation, improper maintenance or use in violation of instructions furnished by us; or to units
which have been altered or modified without authorization of TACP/THI.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION
AND DVD/CD PLAYER
How to Obtain Warranty Service
If after following all of the operating instructions in this manual and checking the section “Problems and
troubleshooting” and you still find that service is needed;
( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find
the nearest Toshiba Authorized Service Station.
( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.
“TACP/THI Authorized Service Station personnel will come to your home when warranty service is
required. Depending on the type of repair required, the service will either be performed in your
home or the set will be taken to the TACP/THI Authorized Service Station for repair and returned to
your home at no cost to you”.
In the Continental United States contact:
In Hawaii Contact:
Toshiba Hawaii, Inc
327 Kamakee Street,
Honolulu, Hawaii 96814
(808) 591-8377
Toll Free
1-800-631-3811
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warran-
ties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replace-
ment of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-
tion of TACP or THI arising under this warranty or under any statute, or law of the United States or any state
thereof, is here by limited to 90 days from the date you discover or should have discovered, the defect. This
limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to
state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not
apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration
Form” enclosed, and forward this completed form with a copy of bill of sale to TOSHIBA OF
CANADA to “Register and Validate” their warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
Rev. 09-01-98
46
Download from Www.Somanuals.com. All Manuals Search And Download.
03/07
U
Printed in Thailand
Download from Www.Somanuals.com. All Manuals Search And Download.
|