Toshiba TV DVD Combo MD13N3 User Manual

COMBINATION COLOR TELEVISION AND

DVD/CD PLAYER

Owner’s Manual

MD13N3

DIGITAL VIDEO

ATTENTION

For your protection in the event of theft or loss of this product, please fill in the

information listed below which is for your own personal records.

Date of Purchase

Serial No.

Place of Purchase

TV/CATV MODE SELECTION

When shipped from the factory, the TV/CATV menu option is set to the

“CATV”(Cable Television) mode.

If not using CATV, set this menu option to the “TV” position.

Before operating the unit, please read this manual thoroughly.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause

hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

PORTABLE CART WARNING

(symbol provided by RETAC)

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,

and to ensure reliable operation of the unit, and to protect it from overheating.

S3126A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit

on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat

source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not

sure of the type of power supply to your home, consult your appliance dealer or local power company. For

units intended to operate from battery power, or other sources, refer to the respective pages on this Own-

er's Manual for their operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be

equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into

a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the

outlet, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

(Continued)

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the

unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,

as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short

out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is

grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the

National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-

ments for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged.

f. When the unit exhibits a distinct change in performance, this indicates a need for service.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by

the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

22. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from

the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's

manual of the other equipment carefully and follow the instructions when making any connections.

24. SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume

sound may cause hearing or speaker damage.

Download from Www.Somanuals.com. All Manuals Search And Download.

25. SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

26. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-

ously with high volume sound, it may cause hearing damage.

27. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the

laser beam. It may cause sight damage.

28. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

personal injury and product malfunction.

29. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

nected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD

IN WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRIC SERVICE

EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on discs

On handling discs

Structure of disc contents

Normally, DVD video discs are divided into titles, and

the titles are sub-divided into chapters. VIDEO CDs and

AUDIO CDs are divided into tracks.

Do not touch the playback side of the disc.

DVD video disc

Title 1

Title 2

Chapter 1 Chapter 2

Chapter 1 Chapter 2 Chapter 3

Playback side

Do not attach paper or tape to discs.

VIDEO CD/AUDIO CD

Track 1

Track 2

Track 3

Track 4

Track 5

On cleaning discs

Each title, chapter or track is assigned a number, which

is called “title number”, “chapter number” or “track

number” respectively.

Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the center

outwards with a soft cloth. Always keep the disc

clean.

There may be discs that do not have these numbers.

Notes on copyright

It is forbidden by law to copy, broadcast, show,

broadcast on cable, play in public, and rent copyrighted

material without permission.

This device does not tape-record copy protected DVD

Video Discs.

The device is not to be used for copying copyrighted

content without the express written permission of the

If you cannot wipe off the dust with a soft cloth, wipe

the disc lightly with a slightly moistened soft cloth and

finish with a dry cloth.

Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or antistatic

spray for vinyl LPs. It may damage the disc.

Obtaining such permission is the sole responsibility of

the user.

This product incorporates copyright protection

technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned

by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be

authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

On storing discs

Do not store discs in a place subject to direct sunlight

or near heat sources.

Do not store discs in places subject to moisture and

dust such as a bathroom or near a humidifier.

Store discs vertically in a case. Stacking or placing

objects on discs outside of their case may cause

warping.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Before using your unit

IMPORTANT SAFEGUARDS .............................................. 3

Notes on discs...................................................................... 6

Contents ............................................................................... 7

Parts and functions .............................................................. 8

Remote control ..................................................................... 9

Power source ..................................................................... 10

Antenna connections.......................................................... 11

Cable TV connections ........................................................ 12

TV operation

Setting the language .......................................................... 13

TV operation....................................................................... 14

Closed caption ................................................................... 16

To memorize channels ....................................................... 17

Setting the V-Chip .............................................................. 19

Picture control adjustment.................................................. 22

Stereo and separate audio program (SAP) ........................ 23

Playback operation

Disc .................................................................................... 24

Preparation/Status display of disc ...................................... 25

Playback procedure ........................................................... 26

Special playback ................................................................ 27

Advanced Function

Zooming/Locating desired scene ....................................... 28

Repeat/Random/Program playback and Repeat A-B......... 29

Changing soundtrack language/Subtitles .......................... 30

Changing angles/Title selection/DVD menu....................... 31

Additional Information

Setting language ................................................................ 32

Setting the aspect ratio of TV screen/Setting on screen

display ................................................................................ 33

Dynamic Range Control ..................................................... 34

Parental control setting ..................................................... 35

To change the parental level .............................................. 36

Temporary disabling of rating level by DVD disc ................ 37

Language code list ............................................................. 38

Reception disturbances...................................................... 39

Connections to other equipments ...................................... 40

Problems and troubleshooting ............................................. 42

Specifications ..................................................................... 44

Warranty............................................................................. 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts and functions

Front

AUDIO (L/R)/VIDEO IN jacks (LINE)

SKIP buttons

VOLUME UP/DOWN buttons

OPEN/CLOSE button

Disc tray

Power indicator

POWER button

Headphone jack

STOP button

PLAY button

Remote sensor

CHANNEL UP/DOWN buttons

Rear

COAXIAL DIGITAL AUDIO OUT jack

RF IN jack

AC power cord

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Page

RECALL

Call TV information

Call DVD information

Switch between TV/AV and DVD

Power On/Off

TV/DVD

POWER

0-9

13,14,25

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Direct channel selection of TV

Input setting

Enter a password

14,18

28,29

19,21,35~37

INPUT SELECT

GAME

Switch between TV/AV

Switch between TV/AV and GAME

Open or Close the tray

Sleep timer

26,37

OPEN/CLOSE

MUTE

OPEN/CLOSE

SLEEP

CLOSED

CAPTION

CLOSED CAPTION

Switch between TV/Caption/Text in

Closed Caption mode

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

MUTE

Switch off the sound

Select title

TOP MENU

SUBTITLE

AUDIO

Set Subtitle

CH +

Switch the sound of TV

Change sound track language

VOL –

VOL +

ANGLE

Change playback angle

SETUP/MENU

TV mode - Display menu of TV

13,17~22

RETURN

ENTER

CH –

DVD mode - Call up initial setup mode 32~36

DVD MENU

CANCEL

Display DVD menu

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

Reset information in the menu 19,22,28,35

ZOOM/CH RTN

Switch between present/last channel

Zoom

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

CH+/–

Select channel of TV

Cursor buttons

13,17~22

26,28,31~36

VOL +/–

Adjust volume of TV

Cursor buttons

13,17~22

26,28,31

RETURN

ENTER

Remove DVD set up menu

32~37

Enter information in the menu 13,19,21,26

28,29,31~37

FWD/REV

PLAY

Fast Forward/Review playback

26,27,29,31,37

Playback

PLAY MODE

SKIP

Select playback mode

Skip chapter to forward or reverse

direction

STOP

JUMP

SLOW

PAUSE

Stop

Locating desired scene

Forward/Reverse- slow motion

Pause CD sound

Still picture of DVD

REPEAT A-B

Repeat playback between A and B

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Inserting Batteries

Slide the battery compartment

cover in the direction of the

arrow.

Install two "AAA" batteries

(supplied), paying attention to

the polarity diagram in the

battery compartment.

Replace the compartment

cover.

Operation

• Aim the remote control at the remote sensor and

press control buttons to operate.

• Operate the remote control within 30° angle on

either side of the remote sensor, up to a dis-

tance of Approx. 5 meters.

Approx. 5 meters

The precautions below should be followed when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh

ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery

manufacturer’s directions).

Power source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert

AC Outlet

the AC cord plug into a standard 120V 60Hz polarized AC outlet.

Wider Hole

and Blade

NOTES:

Never connect the AC line cord plug to other than the specified

voltage (120V 60Hz). Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC

outlet, do not attempt to file or cut the blade. It is the user’s

responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the

unit fails to function, simply unplug the unit from the AC outlet

and plug it back in. The unit should return to normal operation.

If the AC cord plug is plugged in for the first time, wait for about

5 seconds before pressing the POWER button.

•

Polarized AC Cord Plug

(One blade is wider than the other.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Antenna connections

Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna

system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

Connect the 75 ohm Cable from the Combination

VHF/UHF Antenna to the Antenna Jack.

Antenna

Jack

Antenna

Jack

If your Combination VHF/UHF Antenna has a 300

ohm Twin-lead Wire, the use of the 300-75 ohm

Matching Transformer may be necessary.

75 ohm

Coaxial

Cable

300-75 ohm

Matching

Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)

Connect the UHF 300 ohm Twin-lead Wire to the

Combiner (not supplied). Connect the VHF 300

300-75 ohm

Matching

Transformer

Antenna

Jack

ohm Twin-lead Wire to the 300-75 ohm Matching

Transformer. Attach the Transformer to the Com-

biner, then attach the Combiner to the Antenna

Jack.

Combiner

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)

Connect the VHF 75 ohm cable and UHF 300 ohm

Twin-lead Wire to the Combiner. Attach the Com-

biner to the Antenna Jack.

Antenna

Jack

VHF 75 ohm

Combiner

UHF 300 ohm

Download from Www.Somanuals.com. All Manuals Search And Download.

Cable TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable

TV Converter box. Some cable companies offer “premium pay channels” in which the signal is

scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device

which is generally provided by the cable company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a Converter/Descrambler

Antenna

box, connect the CATV 75 ohm Coaxial Cable directly to the

Jack

Antenna Jack on the back of the TV/DVD.

75 ohm

Coaxial Cable

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the

incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,

connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the

connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually

channel 3 or 4) and use the Converter/Descrambler box to select channels.

Incoming

75 ohm

CATV Cable

Antenna

Jack

75 ohm Cable to

TV/DVD

Converter/

Descrambler

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH

SCRAMBLED PREMIUM CHANNELS

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the

use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from

the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”

position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune

your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/

Descrambler box to tune scrambled channels.

Converter/

Descrambler

Incoming

75 ohm

Antenna

Jack

75 ohm Cable

to TV/DVD

CATV Cable

A/B Switch

Splitter

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.

Adjustment menus and messages will appear in the language of your choice.

On-screen language selection (step 5) will automatically appear on the screen when you press the MENU

button initially. Select the language you prefer first, then proceed with the other menu options.

To turn on the TV/DVD, press POWER. The Power indicator

will light.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press MENU in the TV mode.

The TV menu screen will appear.

Press

until the OPTION

OPEN/CLOSE

MUTE

menu appears.

SLEEP

CLOSED

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

/MENU

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Press

to select the

“LANGUAGE” option, then press

CH +

button.

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

VOL –

VOL +

ENTER

RETURN

CH –

/MENU

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

Press

to select the

desired language: English

(ENGLISH), Spanish

(ESPAÑOL) or French

(FRANCAIS), then press

ENTER.

SKIP

LANGUAGE/IDIOMA/LANGUE

SLOW

PAUSE

SLOW

REPEAT A–B

ENGLISH

ESPAÑOL

FRANCAIS

/ ENTER / MENU

Press MENU until the MENU

screen is cleared.

NOTE:

• If the unit does not operate properly,

or No key operation (by the unit and/

or the remote control): Static electricity,

etc., may affect the player's operation.

Disconnect the AC power cord once, then

connect it again.

• TheTV section has its own menu and also

DVD section has its own menu (see page

32).

Download from Www.Somanuals.com. All Manuals Search And Download.

TV operation

To turn on the TV/DVD, press

POWER.

Adjust the volume level by

pressing VOL + or –. The volume

level will be indicated on the

screen by green bars. As the

volume level increases, so do

the number of bars. If the volume

decreases, the number of green

bars also decreases.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

VOLUME

Set the TV/CATV menu

option to the appropriate

position. (See page 17.)

- VHF/UHF channels

CATV - CABLE TV channels

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

Press the Direct Channel selection

buttons to select the channel.

TOP MENU

SUBTITLE

AUDIO

ANGLE

CH 012

TV Mode Direct Channel Selection

When the TV/CATV menu option is

in the TV position, all channels can

be instantly selected by using two

buttons. (for example, to select

channel 2, press “0”, then “2”. If

you press only “2”, channel

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

CH +

selection will be delayed for a few

seconds.) For channels 10 and

above, press the 2 digits in order.

VOL –

VOL +

ENTER

RETURN

CH –

CATV Mode Direct Channel Selection

When the TV/CATV menu option is in the CATV position, channels

can be selected as follows:

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

TO SELECT CATV CHANNELS:

SKIP

1-9:

Press “0” twice, then 1-9 as needed. Example, to select

channel 2, press "002".

SLOW

PAUSE

SLOW

REPEAT A–B

10-12:

13-99:

Press “0”, then the remaining 2 digits. Example, to

select channel 12, press "012".

Press the 2 digits in order. Example, to select channel

36, press "36".

100-125: Press the 3 digits in order. Example, to select channel

120, press "120".

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel

will be selected in 2 seconds.

CATV

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

NOTES:

• If a channel with no broadcast is

selected, the sound will automati-

cally be muted.

• If a station being viewed stops

broadcasting, the TV will automati-

cally shut itself off after 15 minutes.

(5A)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANNEL UP/DOWN

Press and release CH + or –. The

channel automatically stops at the

next channel set into memory.

For proper operation, before select-

ing channels, they should be set into

the memory. See pages 17 and 18

“To memorize channels”

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

RECALL

STEREO SAP

CH 012

Press RECALL to display the

current informations on the screen.

Press RECALL again to clear the

call display.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

SEL. MONO+SAP

• Channel number or VIDEO mode

• Stereo or SAP (second audio

program) audio status

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

• Audio output status

CH RETURN

CH +

This button allows you to go back to

the last channel selected by pressing

CH RTN. Press CH RTN again to

return to the last channel you were

watching.

VOL –

VOL +

ENTER

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

MUTE

SLOW

PAUSE

SLOW

REPEAT A–B

MUTE

Press MUTE to switch off the sound.

The TV/DVD’s sound will be silenced

and “MUTE” will briefly appear on the

screen. The sound can be switched

back on by pressing this button

again or one of the VOLUME + or –

buttons.

SLEEP

120

To set the TV/DVD to turn off after a

preset amount of time, press SLEEP

on the remote control. The clock will

count down 10 minutes for each press

of SLEEP (120, 110, ...10, 0). After the

sleep time is programmed, the display

will appear briefly every ten minutes

to remind you that the sleep timer is

operating. To confirm the sleep timer

setting, press SLEEP and the remain-

ing time will be displayed for a few sec-

onds.To cancel the sleep timer, press

SLEEP repeatedly until the display

turns to 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

Closed caption

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed Captioning

will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

Captions: This Closed Caption Mode will display text on the

screen in English or another language (depending on the set-

ting of the Closed Captions CH 1/2).

Generally, Closed Captions in English are transmitted on Cap-

tions Channel 1 and Closed Captions in other languages are

transmitted on Captions Channel 2.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Text: The Text Closed Caption Mode will usually fill the screen

with a programming schedule or other information.

After selecting a Closed Caption Mode, it will stay in effect until it

is changed, even if the channel is changed.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

If the Captions signal is lost due to a commercial or a break in

the signal, the Captions will reappear when the signal is received

again. If the channels are changed, the Captions will be delayed

approximately 10 seconds. The Captions will appear in places

on the screen where they will least interfere with the picture,

usually on the bottom of the screen. News programs will usually

show three-line Closed Captions which scroll onto the screen.

Most other shows provide two or three lined Captions placed

near the character who is speaking so the viewer can follow the

dialogue. Words in italics or underlined describe titles, words in

foreign languages or words requiring emphasis. Words that are

sung usually appear enclosed by musical notes.

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

CH +

VOL –

VOL +

ENTER

RETURN

For television programs broadcasting with Closed Captions, look

in your TV guide for the Closed Captions symbol (CC).

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

TO VIEW CLOSED CAPTIONS

Press CLOSED CAPTION to

switch between normal TV and the

two closed caption modes (cap-

tions and full screen text). Closed

captioning will display text on the

screen for hearing impaired

viewers.

NOTES:

• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with

Closed Captioning, especially with live programs. This is because during live programs, captions are also

entered live. These transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may

interfere with Closed Captions.

• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or

may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception

or use an outdoor antenna.

Download from Www.Somanuals.com. All Manuals Search And Download.

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next

channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-

grammed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up

to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.

When shipped from the factory, this menu option is in the CATV mode.

TV/CATV SELECTION

Press MENU in the TV mode.

The TV menu screen will appear.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press

menu appears.

until the SET UP

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

ADD

OPEN/CLOSE

MUTE

SLEEP

/MENU

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Press

CATV”.

to select the “TV/

TV/CATV

ADD/DELETE

CATV

ADD

AUTO CH MEMORY

CH +

/MENU

VOL –

VOL +

ENTER

RETURN

CH –

Press

or CATV mode.

to select the TV

TV/CATV

ADD/DELETE

AUTO CH MEMORY

ADD

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

TV - VHF/UHF channels

CATV - CABLE TV channels

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

/MENU

Press MENU until the MENU

screen is cleared.

CATV CHART

The chart below is typical of many cable system channel allocations.

Download from Www.Somanuals.com. All Manuals Search And Download.

To memorize channels

(Continued)

AUTOMATIC MEMORY TUNING

Press MENU in the TV mode. The TV menu

screen will appear.

Press

appears.

until SET UP menu

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

ADD

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

/MENU

Press

to select the “AUTO

CH MEMORY”, then press

The TV will begin memorizing all the

channels available in your area.

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

ADD

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

/MENU

Press MENU until the MENU screen

is cleared.

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

TO ADD/DELETE CHANNELS

Select the desired channel to be

memorized or deleted using Direct

Channel Selection (0-9), or CH + or –.

CH +

VOL –

VOL +

ENTER

Press MENU. The TV menu

screen will appear.

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

Press

appears.

until SET UP menu

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

ADD

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

/MENU

Press

DELETE”.

to select the “ADD/

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

ADD

/MENU

Press

to select “ADD” or

“DELETE”, whichever function you

want to perform.

TV/CATV

ADD/DELETE

AUTO CH MEMORY

CATV

DELETE

/MENU

Press MENU until the MENU screen

is cleared.

Repeat steps 1-6 for other channels

you want to add or delete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the V-Chip

An age limitation can be set to forbid children to watch programs according to "TV RATING" and

"MOVIE RATING".To use the V-Chip function, you must register a password.

TO REGISTER PASSWORD

Press MENU in the TV mode. The TV menu

screen will appear.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press

menu appears.

until the OPTION

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

/MENU

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

Press

to select the “V-

TOP MENU

SUBTITLE

AUDIO

ANGLE

CHIP SET”, then press

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

/MENU

CH +

VOL –

VOL +

ENTER

Enter the password (4 digits)

using Direct Channel Selection

(0-9), then press ENTER.

• If you put a wrong number,

press CANCEL.

RETURN

CH –

V-CHIP SET

NEW

PASSWORD

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

9/ENTER/CANCEL/MENU

SKIP

" " appears instead of the number.

SLOW

PAUSE

SLOW

REPEAT A–B

Enter the same password again

for the safety, then press ENTER.

Now the password was registered

and V-Chip setting menu will

appear on the display.

V-CHIP SET

CONFIRM

PASSWORD

9/ENTER/CANCEL/MENU

NOTES:

If you forget the password, you can-

not set the V-Chip.

•

To avoid forgetting the password, write

it down and keep in the safe place.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the V-Chip

(Continued)

TO SET THE V-CHIP

In the V-CHIP SET menu, press

to select the “TV

RATING”.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press

desired setting.

OFF

TV-Y :

TV-Y7 :

TV-G :

TV-PG:

TV-14 :

TV-MA:

to display the

TV RATING is not set

All children

7 years old and above

General Audience

Parental guidance

14 years old and above

17 years old and above

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

When you select TV- Y7, TV-PG, TV-14 or TV-MA, press

RECALL to show the contained rating. Press

to select the desired item you want.

CH +

Press

“MOVIE RATING”.

to select the

VOL –

VOL +

ENTER

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

Press

rating.

to select desired

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

OFF

MOVIE RATING is not set

All ages

Parental guidance

PG-13 : Parental guidance

less than 13 years old

Under 17 years old

Parental guidance suggested

NC-17 : 17 years old and above

Adult only

Press

CHIP”.

to select “V-

To use after the TV is protected

When the program applied to the V-

Chip setting is received, enter the

password. Protection can be can-

celled.

Press

to Display “ON”.

Now your settings were set into

the memory.

NOTE:

The V-Chip function is activated only

on programs and tapes that have the

rating signal.

Press MENU until the MENU

screen is cleared.

Download from Www.Somanuals.com. All Manuals Search And Download.

TO CHANGE PASSWORD

Press MENU in the TV mode. The TV menu

screen will appear.

Press

until OPTION

menu appears.

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

/MENU

Press

CHIP SET”, then press

to select the “V-

OPEN/CLOSE

MUTE

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

SLEEP

CLOSED

CAPTION

/MENU

TOP MENU

SUBTITLE

AUDIO

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Enter the Password using Direct

Channel Selection (0-9), then

press ENTER.

• If you put a wrong number,

press CANCEL.

V-CHIP SET

PASSWORD

CH +

VOL –

VOL +

9/ENTER/CANCEL/MENU

RETURN

ENTER

CH –

Press

“CHANGE PASSWORD”, then

press or

to select

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

Enter the new password using

Direct Channel Selection (0-9),

then press ENTER.

Enter the same password again

for safety, then press ENTER.

Press MENU repeatedly to

return to normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture control adjustment

Picture controls are factory preset but you can adjust them individually as follows:

Press MENU in the TV mode. The TV menu

screen will appear.

Press

until PICTURE

2 _{menu appears.}

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

BRIGHTNESS

CONTRAST

COLOR

TINT

SHARPNESS

+32

/MENU

OPEN/CLOSE

MUTE

Press

you want to adjust.

to select the item

SLEEP

CLOSED

CAPTION

BRIGHTNESS

CONTRAST

COLOR

TINT

SHARPNESS

+32

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

/CANCEL/MENU

CH +

Press

setting.

to adjust the

VOL –

VOL +

ENTER

RETURN

CH –

increase brightness

increase contrast

be brilliant color

decrease brightness

decrease contrast

be pale color

BRIGHTNESS

CONTRAST

COLOR

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

be reddish color

be greenish color

makes picture softer

TINT

SHARPNESS

SKIP

makes picture clearer

SLOW

PAUSE

SLOW

REPEAT A–B

After your desired setting press

MENU until the MENU screen is

cleared.

CANCEL

Pressing CANCEL while making picture adjustments will return all

adjustments to the factory preset levels.

NOTE:

The CONTRAST default setting is set

to maximum at the factory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stereo and separate audio program (SAP)

The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly

enhance TV viewing by bringing you programs with high fidelity stereo sound.

MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to

transmit a second language for bilingual transmission or for other purposes.

LISTENING TO STEREO SOUND

When the TV is turned on or a

channel selection is made, make

STEREO

CH 013

certain the STEREO appears on

the screen. This means that

"Stereo" broadcasting is avail-

able. You can enjoy stereo

sound from the left and right

speakers.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

• When "Mono" broadcasting is

received, no indication is

displayed.

• If the broadcast signal is not

strong enough or clear stereo

sound is not available, press

AUDIO to change to mono

sound. The noise should be

eliminated. Press it again to

return to the stereo sound.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

CH +

LISTENING TO SAP (SEPARATE AUDIO PROGRAM)

VOL –

VOL +

ENTER

When the TV is turned on or a

channel selection is made, make

RETURN

STEREO SAP

CH 013

CH –

certain the SAP appears on the

screen. This means that the

"Separate Audio Program"

broadcasting is available.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

TO SELECT DESIRED SOUND

Press AUDIO to select the

desired sound.

SEL. STEREO

MONO+SAP BROADCASTING

MONO SOUND

(MAIN)

MONO + SAP SOUND

(MONO)

SAP SOUND

STEREO+SAP BROADCASTING

STEREO SOUND

(MAIN)

SAP SOUND

MONO SOUND

(MAIN)

MONO + SAP SOUND

(MAIN)

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

About this owner’s manual

Playable discs

This owner’s manual explains the basic instructions of

this TV/DVD. Some DVD video discs are produced in a

manner that allows specific or limited operation during

playback. As such, the TV/DVD may not respond to all

operating commands. This is not a defect in the TV/DVD.

Refer to instruction notes of discs.

This TV/DVD can play the following discs.

Maximum

Disc

Disc Mark Contents

Size

playback time

Approx. 4 hours

(single sided disc)

12 cm

Audio

video

(moving

“

” may appear on the TV screen during operation.

Approx. 8 hours

(double sided disc)

A “ ” means that the operation is not permitted by the

TV/DVD or the disc at the moment.

For example, it is unable to skip the playback of

button is pressed. Alternatively, the “ ” may also

DVD

video

discs

Approx. 80 minutes

(single sided disc)

pictures)

)

8 cm

Approx. 160 minutes

(double sided disc)

indicate that the feature is not available for the disc.

Notes on region numbers

Approx. 74 minutes

Approx. 20 minutes

12 cm

Audio

video

(moving

The region number of this TV/DVD is 1. If region

numbers, which stand for their playable area, are printed

on your DVD video disc and you do not find

disc playback will not be allowed by the player. (In this

case, the TV/DVD will display a message on-screen.)

VIDEO

CDs

ALL

DIGITAL VIDEO

pictures)

8 cm

Approx. 74 minutes

Approx. 20 minutes

On VIDEO CDs

12 cm

Audio

CDs

Audio

This TV/DVD supports VIDEO CDs equipped with the

PBC (Version 2.0) function. (PBC is the abbreviation of

Playback Control.) You can enjoy two playback

variations depending on types of discs.

8 cm

(CD

single)

The following discs are also available.

CD-R

CD-RW

• VIDEO CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this TV/DVD in the

same way as an audio CD.

CD-R/RW discs recorded by CD-DA method can be

played. Some CD-R/RW discs may be incompatible.

• VIDEO CD equipped with PBC function

(Version 2.0)

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-RW, etc., or non

standardized discs even if they may be labeled as above.

• ThisTV/DVD uses the NTSC color system, and cannot play

DVD video discs recorded in any other color system (PAL,

SECAM, etc.).

In addition to operation of a VIDEO CD not equipped

with the PBC function, you can enjoy playback of

interactive software with search function by using the

menu displayed on the TV screen (Menu Playback).

Some of the functions described in this owner’s

manual may not work with some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation/Status display of disc

The following pages describe the

setup/operation in DVD mode.

Preparation

Before DVD/CD operation, please make preparations as follows.

Insert the AC cord plug into a standard 120V 60Hz polarized

AC outlet.

• If the AC cord plug is plugged in for the first time, wait for

about 5 seconds before pressing POWER.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

NOTE: When connecting to other equipment, unplug the unit

from the AC outlet.

Press POWER on the unit or on the remote control to turn on

OPEN/CLOSE

MUTE

the unit. The POWER indicator will light.

• Every time you press POWER, the TV/DVD starts from TV

mode.

SLEEP

CLOSED

CAPTION

• When using an amplifier, switch on the amplifier.

TOP MENU

SUBTITLE

AUDIO

ANGLE

Press TV/DVD to select DVD

mode.

The DVD startup screen will ap-

pear on the screen.

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

welcome

CH +

VOL –

VOL +

ENTER

RETURN

CH –

Status display of disc

Press RECALL.The status display of the disc will appear on the

screen.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

DVD

SKIP

Title number

Title elapsed playing time

Chapter number Title total time

SLOW

PAUSE

SLOW

REPEAT A–B

Disc operation

1/8

1/19

0:07:18 2:02:31

1/8 Eng 1/1

Camera angle

1/8 Eng DolbyDigital

Subtitle language

Audio language

A kind of audio

To make status display disappear, press RECALL again.

Audio CD/Video CD

PBC (PlayBack Control) on Video CD

Track elapsed playing time

NOTE:

Disc operation

PBC

1 / 8

If the unit does not operate properly:

Static electricity, etc., may affect the play-

er's operation. Disconnect the AC power

cord once, then connect it again.

Track total time

0:02:31 0:53:09

Track number

Play list

Playlist

• When you play the CD disc, the status display will appear

on the screen and continue displaying.

• When you play the Video CD, Play list will not appear on the

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback procedure

Press OPEN/CLOSE on

the unit or the remote con-

trol.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

The disc tray will open.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

Place a disc onto the tray.

Position it with the printed

label side up, align it with

the guides, and place it in

its proper position.

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

CH +

VOL –

VOL +

ENTER

Press OPEN/CLOSE or

PLAY.

The disc tray closes auto-

RETURN

CH –

matically.

TheTV-screen,

to “ ” and then playback

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

changes

SKIP

commences.

SLOW

PAUSE

SLOW

REPEAT A–B

• A menu screen will

appear on the TV screen,

if the disc has a menu

feature.

NOTES:

• If a non-compatible disc is loaded, “Incor-

rect Disc”, “Region Code Error” or “Paren-

tal Error” will appear on theTV screen ac-

cording to the type of loaded disc. If these

appear, check your disc again (see pages

24 and 35).

• Some discs may take a minute or so to

start playback.

• When you set a single-faced disc label

downwards (ie. the wrong way up) and

press PLAY or OPEN/CLOSE on the unit,

Press

to make a selection.

Press ENTER.

• Title is selected and play commences.

“

”will appear on the display for 3 about

seconds and then “No Disc” will be dis-

played.

Press STOP to end playback.

• The unit memorizes the stopped point, depending on the

disc. “ ” appears on the screen. Press PLAY to resume

playback (from the scene point).

• If you press STOP again or unload the disc (“ ” appears

on the screen.), the unit will clear the stopped point.

• Some playback operations of DVDs may

be intentionally fixed by software produc-

ers. Since this unit plays DVDs according

to the disc contents the software produc-

ers designed, some playback features may

not be available. Also refer to the instruc-

tions supplied with the DVDs.

• When playing DTS-encoded Audio CDs,

excessive noise will be heard from the

analogue stereo outputs. To avoid possi-

ble damage to the audio system, the con-

sumer should take proper precautions

when the analogue stereo outputs of the

DVD player are connected to an amplifi-

cation system.

To stop the playback, press STOP.

Then press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press OPEN/CLOSE then press

POWER.

The disc tray closes automatically and unit turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special playback

Note: There may be a slight delay be-

tween when you press the button and

the function activating.

Fast Forward Playback

Press FWD during normal playback.

Each press of the FWD button will increase the speed of the

(CD:

(x 2),

(x 4),

(x 8),

(x 15).

(x 20))

• To resume normal playback, press PLAY.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Review Playback

Press REV during normal playback.

Each press of the REV button will increase the speed of the

OPEN/CLOSE

MUTE

SLEEP

(CD:

(x 2),

(x 4),

(x 8),

(x 15).

(x 20))

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

• To resume normal playback, press PLAY.

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Still Playback

Press PAUSE during normal

CH +

playback to pause playback.

VOL –

VOL +

ENTER

RETURN

CH –

To resume normal playback,

press PLAY.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

Frame Advance

SLOW

PAUSE

SLOW

REPEAT A–B

Press PAUSE during still playback.

One frame is advanced each time you press PAUSE.

To resume normal playback, press PLAY.

Slow-motion Playback

Press SLOW

(

)

Reverse or SLOW

(

)

Forward during

normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2,

x1/4, x1/6, x1/8.

• To resume normal playback, press PLAY.

• To resume the still playback, press PAUSE.

NOTE:

The unit is capable of holding a still video

image or On screen display image on your

television screen indefinitely. If you leave

the still video image or On screen display

image displayed on your TV for an ex-

tended period of time, you risk permanent

damage to your television screen. Pro-

jection televisions are very susceptible.

Locating a chapter or track

Press SKIP(

) Forward or SKIP(

) Reverse during

playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is

skipped.

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming/Locating desired scene

Zooming

This unit will allow you to zoom in on the frame image. You

can then make selections by switching the position of the

frame.

Press TV/DVD to select

DVD mode.

Press ZOOM during play-

back.

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

The center part of the

image will be zoomed in.

Each press of ZOOM will

change the ZOOM

OPEN/CLOSE

MUTE

(x 2),

(x 4).

2 (x 3) and

SLEEP

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

Press

to view a different part of the frame.

You may move the frame from the centre position to UP,

DOWN, LEFT or RIGHT direction.

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

In the zoom mode press ZOOM repeatedly to return to a

1:1 view (

Off).

CH +

VOL –

VOL +

ENTER

RETURN

CH –

Locating Desired Scene

Use the title, chapter and time recorded on the disc to

locate the desired point to play back.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

Press JUMP during play-

back.

Jump

SLOW

PAUSE

/Enter/0 9/Cancel/Jump

Press

Track)” or “

to select the “

(Time)”.

(Chapter)”, “

(Title/

Press Number buttons (0–9) to input the number.

NOTES:

• You can select the Pause, Slow or

Search playback in the zoom mode.

• Some discs may not respond to zoom

feature.

• If you input a wrong number, press CANCEL.

• Refer to the package supplied with the disc to check the

numbers.

Press ENTER.

• Playback starts.

• When you change the title, playback starts from

Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat/Random/Program playback and Repeat A-B

Press PLAY MODE during playback or stop mode.

Each time you press PLAY MODE, playback mode changes as follows.

DVD

Audio CD/Video CD

On screen

display

Title:

On screen

display

Operation

Repeats entire disc.

→

Repeats the current title.

→

All:

↓

Track:

↓

Chapter: Repeats the current chapter.

Repeats the current track.

↓

Off:

Resumes normal playback.

Random Play: Plays the tracks in random order.

↓

*Program:

Plays the tracks in program order.

• During stop mode, PLAY MODE key is not effective.

↓

(Status display): Resumes normal playback.

• During stop mode, you can not select “

Track”.

• Random playback and Program playback do not

function on the Video CD.

*Program menu

Program

Use number buttons (0–9) to

8:29

8:54

7:31

enter the track’s number you

want to program, then press

ENTER. The track number and

total time are displayed.Repeat

this step to enter additional

tracks.When you have finished

entering tacks, press PLAY to

start Program playback.

Total 3 0:25:14

/Enter/0 9/Cancel/Play/PlayMode

A playlist of your programmed

tracks is displayed.

NOTES:

• If you put a wrong number, press CANCEL.

• To cancel program play, press STOP 3 times.

• To clear the programs on the program menu, press CANCEL until all programs

will be cleared.

• The program is cancelled when you open the disc tray or turn off the power.

Repeat A-B

Repeat A-B playback allows you to repeat material between two selected points.

Press REPEAT A-B during playback.

The start point is selected.

Press REPEAT A-B again.

A B

The end point is selected. Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A automatically, then starts

again.

To resume normal playback press REPEAT A-B again.

“

Off” appears on the screen.

NOTES:

• Some discs may not work with the repeat operation.

• In Repeat A-B mode, subtitles near point A or B may not appear.

• You may not be able to set Repeat A-B, depending on the scenes of the DVD.

• Repeat A-B does not work with interactive DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing soundtrack language/Subtitles

Changing soundtrack language

You can select the language when you play a multilingual

disc.

Press AUDIO during play-

back.

2/8 Fra Dolby Digital

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

The current soundtrack

language will appear.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

Press AUDIO repeatedly

until the desired language

is selected.

CAPTION

1/8 Eng Dolby Digital

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

The on-screen display will

disappear after a few sec-

onds.

CH +

In case of video CD playback

Audio type changes as follows each time you press ADUIO.

VOL –

VOL +

ENTER

RETURN

CH –

➡

NOTES:

• If the desired language is not heard af-

ter pressing the SUBTITLE button sev-

eral times, the language is not recorded

on the disc.

• Changing soundtrack language is can-

celled when you open the disc tray.The

initial default language or available lan-

guage will be heard if the disc is played

back again.

Subtitles

Turning the Subtitles On and Off

When playing back a disc recorded with subtitles, you

can turn the subtitles on or off.

Press SUBTITLE during play-

back until “Off” appears.

Off

• Changing subtitle language is cancelled

when you open the disc tray or turn the

power off.

• Some functions may not work on some

DVDs.You may not be able to turn sub-

titles on or off or change subtitles.While

playing the DVD, the subtitle may

change when:

- you open or close the disc tray

- you change the title.

• In some cases, the subtitle language is

not changed to the selected one imme-

diately.

Changing the subtitle language

You can select the language when playing back a disc

recorded with multi-lingual subtitles.

Press SUBTITLE repeat-

edly during playback until

your desired language ap-

pears.

1/32 Eng

The on-screen display will disappear after a few seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing angles/Title selection/DVD menu

Changing Angles

When playing back a disc recorded with multi-angle facil-

ity, you can change the view angle.

Press ANGLE during play-

back.

1/9

RECALL

TV/DVD

POWER

The current angle will ap-

pear.

INPUT SELECT

GAME

OPEN/CLOSE

SLEEP

CLOSED

MUTE

CAPTION

Press ANGLE repeatedly until the desired angle is selected.

TOP MENU

SUBTITLE

AUDIO

ANGLE

Title Selection

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Two or more titles are recorded on some discs. If the title

menu is recorded on the disc, you can select the desired

title.

CH +

Press TOP MENU during playback.

Title menu appears on the screen.

VOL –

VOL +

RETURN

SELECT/ENTER

CH –

Press

to select the desired title.

Press ENTER or PLAY.

The playback of the selected title will start.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

SLOW

PAUSE

SLOW

REPEAT A–B

DVD Menu

Some DVDs allow you to select the disc contents using the

menu.

When you play back these DVDs, you can select the sub-

title language and sound-track language,etc. using the

DVD menu.

Press DVD MENU during playback.

The DVD menu appears on the screen.

• Press DVD MENU again to resume playback at the scene

when you pressed DVD MENU.

NOTES:

Press

to select the desired item.

• Depending on the DVD, you may not be

able to change the angles even if multi-

angles are recorded on the DVD.

• Depending on the DVD, you may not be

able to select the title.Depending on the

DVD, a “title menu”may simply be called

a “menu”or“title”in the instructions sup-

plied with the disc.

Press ENTER.

The menu continues to another screen. Repeat steps 2

and 3 to set additional items if any.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting language

You can change the default settings

to customise performance to your

preference.

Press TV/DVD to select

DVD mode.

Press SETUP in the stop

mode.

Main Menu

Language

Picture

Sound

Press

to select

Parental

“Language”, then press

or ENTER.

/Enter/Setup/Return

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press

to select

“OSD Language”, then

press

or ENTER.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Press

to select de-

OSD Language

sired language (e.g. Eng-

lish), then press ENTER.

The menu returns to “Lan-

guage”menu automatically.

English

Francais

Espanol

CH +

VOL –

VOL +

ENTER

/Enter/Setup/Return

• If you want to return to the

previous menu, press

or RETURN.

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

Repeat steps 2-3 for other “Language” setting.

SKIP

Other Selection: (Menu/Audio/Subtitle)

If you want to select another language, enter the language

code (see the Language code list on page 38).

SLOW

PAUSE

SLOW

REPEAT A–B

Off: (subtitle)

Subtitles do not appear.

Press SETUP to remove the Menu screen.

NOTES:

• If the selected soundtrack language is

not recorded on the disc, the original

language will be heard.

• If the selected subtitle language is not

recorded on the disc, the first-priority

language is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the aspect ratio of TV screen/Setting on screen display

Setting the aspect ratio of TV screen

You can select the aspect ratio for your TV.

Press TV/DVD to select

DVD mode.

Press SETUP in the stop

mode or No Disc.

Main Menu

Language

Picture

Sound

Press

to select

Parental

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

“Picture”, then press

/Enter/Setup/Return

ENTER.

Press

“TV Screen”, then press

or ENTER.

to select

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

Press

to select

TV Screen

your desired screen type,

then press ENTER.

16:9

4:3

TOP MENU

SUBTITLE

AUDIO

ANGLE

4:3

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

You have the following screen sizes to choose from:

16:9 Wide screen

Select this mode when connecting to a wide-screen TV.

A wide screen picture is displayed full size.

CH +

4:3

Letterbox

VOL –

VOL +

ENTER

Select this mode when connecting to a conventional TV.

When playing back a wide screen-DVD disc, it displays the

wide picture with black bands at the top and bottom of

screen.

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

4:3

Panscan

It displays the wide picture on the whole screen with left

SKIP

and right edges automatically cut off.

SLOW

PAUSE

SLOW

REPEAT A–B

• If you want to return to the previous menu, press

RETURN.

Press SETUP to remove the Menu screen.

Status on screen display

On screen display can be switched on or off when you

press the buttons.

Press SETUP in the stop mode or No Disc.

Press

to select “Picture”, then press

or ENTER.

Picture

Press

“Display”.

to select

TV Screen

Display

16:9

NOTE:

If the DVD disc is not formatted in the pan

& scan style, it displays 4:3 style.

Press

select “On” or “Off”.

or ENTER to

Picture

TV Screen

Display

16:9

Off

On: On screen displays appear when you press the

buttons (factory setting).

Off: On screen displays do not appear when you press

or any buttons.

• If you want to return to the previous menu, press

RETURN.

Press SETUP to remove the Menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dynamic Range Control

DRC (Dynamic Range Control) ena-

Press TV/DVD to select

DVD mode.

Press SETUP in the stop

mode.

Main Menu

Language

bles you to control the dynamic range

so as to achieve a suitable sound for

your equipment.

Picture

Sound

Press

to select

Parental

“Sound”.

/Enter/Setup/Return

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

Press

lect “DRC”.

or ENTER to se-

Sound

DRC

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

/Enter/Setup/Return

TOP MENU

SUBTITLE

AUDIO

ANGLE

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

Press

lect “On” or “Off”.

or ENTER to se-

Sound

DRC

Off

CH +

VOL –

VOL +

ENTER

/Enter/Setup/Return

RETURN

CH –

• If you want to return to the previous menu, press

RETURN.

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

Press SETUP to remove the Menu screen.

SLOW

PAUSE

SLOW

REPEAT A–B

NOTES:

• This function works only during play-

back of Dolby Digital recorded discs.

• The level of Dynamic Range Reduction

may differ depending on DVD video

disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental control setting

Some discs are specified not suitable

for children. Such discs can be limited

not to play back with the unit.

Press TV/DVD to select

DVD mode.

Press SETUP in the stop

mode.

Main Menu

Language

Picture

Sound

Press

to select

Parental

“Parental”, then press

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

ENTER.

/Enter/Setup/Return

Press

to select

Parental

“Parental Level”, then press

Password

Parental Level

Off

or ENTER.

OPEN/CLOSE

MUTE

SLEEP

CLOSED

CAPTION

Press

to select a

Parental Level

TOP MENU

SUBTITLE

AUDIO

ANGLE

level from Off or 1–8. Press

or ENTER to set the se-

lected level.

Off

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

/Enter/Setup/Return

CH +

VOL –

VOL +

ENTER

• Level Off: The parental control setting does not func-

tion.

• Level 8: Almost all DVD software can be played back.

• Level 1: DVD software for adults cannot be played

back.

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

• Select from the level 1 to level 8. The limitation will be

more severe as the level number is lower.

SKIP

Press

“Password”, then press

or ENTER.

to select

SLOW

PAUSE

SLOW

REPEAT A–B

Parental

Password

Parental Level

Off

Press number buttons (0–

9) for the password.

Don’t forget the password.

• If you input a wrong

number, press CANCEL.

Password

1234

NOTES:

Press ENTER to store the

password.

Note: Now the rating is

locked and the setting can-

not be changed unless you

enter the correct password.

Parental

• If each setup (P.32–36) has been

completed, the unit can always be

worked under the same conditions

(especially with DVD discs).

Each setup will be retained in the

memory when you turn the power off.

• Depending on the discs, the unit can-

not limit playback.

• Some discs may not be encoded with

specific rating level information though

its disc jacket says “adult.” For those

discs, the age restriction will not work.

Password

Parental Level

• If you want to return to the previous menu, press

or RETURN.

Press SETUP to remove the parental control screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

To change the parental level

Press TV/DVD to select DVD mode.

Press SETUP in the stop mode or No Disc.

Press

to select “Parental”, then press

ENTER.

Press

“Password”, then press

or ENTER.

to select

Parental

Password

Parental Level

Press number buttons (0–

9) to enter the password

you have stored.

Password

____

• If you input a wrong number, press CANCEL.

Press ENTER.

The password is now Off.

Parental

Password

Parental Level

Off

Press

“Parental Level”. Then

press or ENTER. The

to select

Parental

Password

Parental Level

Off

Parental Level screen is dis-

played.

Press

to select a

level from Off or 1–8 and

then press

or ENTER.

Press

to select

Parental

“Password” and then press

Password

Parental Level

Off

or ENTER.

Press number buttons (0–

9) to enter a 4-digit pass-

word.

Password

1234

NOTE:

Do not forget the password. If you forget

the password, contact the dealer that you

purchased the unit from.

Note: You can enter a new password.

Press ENTER.

The parental level is now

changed and locked.

Parental

Password

Parental Level

• If you want to return to the previous menu, press

RETURN.

Press SETUP to remove the parental control screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc

Load a DVD disc and press

may try to temporarily cancel the

PLAY (see page 26).

rating level that you have set.

It is up to you to decide whether to

cancel the rating level or not.

If the DVD disc has been designed to temporarily cancel

RECALL

TV/DVD

POWER

INPUT SELECT

GAME

the Rating level, the screen which appears after inserting

a DVD will change, depending on which disc is played. If

you select “YES” with the ENTER key, “Your disc exceeds

the parental control level.” screen will then appear.

OPEN/CLOSE

MUTE

SLEEP

Your disc exceeds the parental control level.

Password

CLOSED

CAPTION

____

TOP MENU

SUBTITLE

AUDIO

ANGLE

Enter/0–9/Cancel/Return

SETUP/MENU DVD MENU

CANCEL ZOOM/CH RTN

If you wish to cancel the set rating level temporarily, enter

the 4-digit password.

Then press ENTER.

Alternatively, if the password has not been set, playback

will commence. If you don’t know (or have forgotten) the

password, select “STOP”.

The setting screen will disappear. Press OPEN/CLOSE to

remove the disc.

CH +

VOL –

VOL +

ENTER

RETURN

CH –

REV

PLAY

STOP

FWD

SKIP

PLAY MODE

JUMP

SKIP

To quit entering, press RETURN.

SLOW

PAUSE

SLOW

REPEAT A–B

Playback will commence if the entered password was cor-

rect.

NOTE:

This temporary cancellation of rating level

will be kept until the disc is ejected.

When the disc is ejected, the original rating

level will be set again automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language code list

Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"

(see page 32).

Language Name Code Language Name Code Language Name Code Language Name Code

Abkhazian

Afar

1112 Fiji

1620 Lingala

1619 Lithuanian

1628 Macedonian

1635 Malagasy

1722 Malay

2224 Singhalese 2919

1111 Finnish

1116 French

2927 Frisian

1123 Galician

1128 Georgian

1835 German

1129 Greek

1135 Greenlandic

1136 Guarani

1211 Gujarati

1531 Hausa

2230 Slovak

2321 Slovenian

2317 Somali

2329 Spanish

2921

2922

2925

1529

Afrikaans

Albanian

Amharic

Arabic

2111 Malayalam

1415 Maltese

1522 Maori

2322 Sundanese 2931

Armenian

Assamese

Aymara

2330 Swahili

2319 Swedish

2328 Tagalog

2325 Tajik

2933

2932

3022

3017

3011

3030

3015

3018

1225

3019

3025

3028

3021

3033

3121

3128

3136

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

Azerbaijani

Bashkir

2324 Tamil

Basque

2411 Tatar

Bengali; Bangla 1224 Hebrew

1933 Nepali

2415 Telugu

2425 Thai

Bhutani

Bihari

1436 Hindi

1819 Norwegian

1831 Oriya

1218 Hungarian

1228 Icelandic

1217 Indonesian

2335 Interlingua

1215 Irish

2528 Tibetan

2611 Tigrinya

2629 Tonga

1611 Turkish

2622 Turkmen

2630 Twi

Breton

1929 Panjabi

1924 Pashto, Pushto

1911 Persian

1711 Polish

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

2123 Italian

1930 Portuguese

2011 Quechua

1311 Japanese

3618 Javanese

1325 Kannada

1828 Kashmiri

1329 Kazakh

1411 Kirghiz

2422 Korean

1524 Kurdish

1525 Laothian

1530 Latin

2731 Ukrainian

2033 Rhaeto-Romance 2823 Urdu

2124 Romanian

2129 Russian

2121 Samoan

2135 Sanskrit

2125 Scots Gaelic

2131 Serbian

2825 Uzbek

2831 Vietnamese 3219

2923 Volapük

2911 Welsh

1714 Wolof

2928 Xhosa

2918 Yiddish

2924 Yoruba

2914 Zulu

3225

1335

3325

3418

2019

3525

3631

Danish

Dutch

English

Esperanto

Estonian

Faroese

2225 Serbo-Croatian

2211 Shona

1625 Latvian, Lettish 2232 Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF

antenna. Outdoor antennas are recommended for best results. The most common types of television

interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable

TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or

drift. Usually caused by interference from automobile ignition systems,

neon lamps or AC powered tools and appliances such as drills or hair

dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is

the direct path and the other is reflected by tall buildings, hills or other

large objects. Changing the direction or position of the antenna may

improve the reception.

SNOW

If the TV/DVD is located far from the TV station, in a fringe reception

area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external

antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving

ripples or diagonal streaks in the picture. Some cases may cause a

loss of contrast in the picture. Changing the direction and position of

the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST

or BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.

Use caution when cleaning or wiping the plastic parts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections to other equipments

The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-

ent on the model and features of each component. Check the Owner's Manual provided with each component

for the location of video and audio inputs and outputs.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems

including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as

shown below.

Front

Speaker

(Right)

Subwoofer

Rear of TV/DVD

TV/DVD

Front

Speaker

(Left)

Coaxial Digital

Audio Output

Center Speaker

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

Surround

Speaker (Left)

Surround

Speaker

(Right)

AV Amplifier with built-in digital surround

decoder as listed above

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

NOTES:

•

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be

damaged.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the audio/video inputs

If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.

NOTE:

Press INPUT SELECT repeatedly to select the desired mode.

“LINE” or TV channel will display on the screen for 4 seconds.

In the DVD mode this key will not

operate.

LINE

1. To connect the TV/DVD to a VCR

Press the INPUT SELECT to select the desired mode to use the TV as a monitor.

Operate your VCR as usual.

VCR

Front of TV/DVD

VIDEO IN

AUDIO IN (R)

AUDIO IN (L)

To Audio/Video

OUT

2. To connect the TV to a camcorder

To playback from the camcorder, connect the camcorder to the TV/DVD as shown.

Camcorder

Front of TV/DVD

VIDEO IN

To Audio/Video OUT

AUDIO IN (R)

AUDIO IN (L)

Audio/Video cord (not supplied)

3. To connect the TV to a TV Game

You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.

1. Connect a TV Game

Front of TV/DVD

VIDEO IN

AUDIO IN (R)

To Audio/Video OUT

AUDIO IN (L)

Audio/Video cord (not supplied)

2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.

Game timer function: After one hour the Game timer display will appear every 30

minutes for about 5 seconds showing how long the time has passed up to 4 hours.

NOTES:

• You can also change the TV screen to LINE by pressing INPUT SELECT. But this screen is normal.

• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different

types of signal generated by these devices and subsequent hook-up variations required, they have not all been included

in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer

or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

POWER

• Make sure the power cord is plugged in.

• Try another AC outlet.

• Power is off, check fuse or circuit breaker.

• Unplug unit, then plug it back in.

TV/DVD does not operate.

TV BROADCAST RECEPTION

• Station or CATV experiencing problems, tune to another station. 14

Poor sound or No sound

• Check Volume adjustments.

• Check for sources of possible interference.

11,12

• Station or CATV experiencing problems, tune to another station.

• Check antenna or CATV connections, reorient antenna.

• Check for sources of possible interference.

Poor picture or No picture

• Check picture control adjustments.

• Station or CATV experiencing problems, tune to another station. 14

• Station signal is weak, reorient antenna to receive weaker station. 11,12

Poor reception on some channels

• Check for sources of possible interference.

• Station or CATV experiencing problems, tune to another station. 14

• Make sure channels are set into memory.

• Check picture control adjustments.

Poor color or no color

• Check antenna or CATV connections, reorient antenna.

• Check for sources of possible interference.

11,12

–

• Station or CATV experiencing problems, tune to another station.

• Make sure channels are set into memory.

• CATV company is scrambling signal.

• Check antenna orientation.

• Check all CATV connections.

Picture wobbles or drifts

No CATV reception

• Set TV/CATV menu option to the CATV mode.

• Station or CATV system problems, try another station.

Horizontal or diagonal bars on

screen

• Check antenna connections, reorient antenna.

• Check for sources of possible interference.

11,12

• Make sure TV/CATV menu option is in the appropriate mode.

• If using antenna, check UHF antenna connections.

No reception above channel 13

• No broadcast on station tuned.

• Sleep Timer is set.

• Power interrupted.

–

TV shuts off

• TV station experiencing problems or program tuned is not closed

captioned. Try another channel.

• Check CATV connection or VHF/UHF antenna, reposition or ro- 11,12

tate antenna.

Closed - Caption is not activated.

• Press CLOSED CAPTION button to turn on the closed caption

decoder.

Display is not shown in your

language.

• Select proper language in the menu options.

Download from Www.Somanuals.com. All Manuals Search And Download.

SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

DVD

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play CD-ROMs, etc.

–

Playback doesn’t start.

No picture

• TV/DVD selector is not set correctly.

• Check the input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

• Select the correct Audio Output position on AV amplifier.

–

No sound

Picture is distorted during CUE or • The picture will be distorted occasionally.

–

REVIEW.

Stopping playback, search, slow-

motion play, repeat play, or

program play, etc. cannot be

performed.

• Some discs may not do some of the functions.

–

No 4:3 (16:9) picture

No on-screen display

No surround sound

• The setup does not match your TV.

• Select Display On.

• The setup does not match your stereo system.

The unit or remote operation key

is not functioning.

• Turn off the unit and unplug the AC power cord for several min-

utes, then replug it.

–

Playback does not start when the

title is selected.

• Check the RATING LEVEL setup.

35~37

Audio soundtrack and/or subtitle

language is not changed when

you play back a DVD.

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.

• Subtitles are cleared. Press SUBTITLE.

No subtitle

Angle cannot be changed.

• Multi-angles are not recorded on the DVD disc.

–

“

” appears on the screen.

• The function is prohibited with the unit or the disc.

–

REMOTE CONTROL

• Aim at the remote control at the remote sensor.

• Operate within Approx. 5 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

The remote control does not

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

GENERAL

Power supply:

Power consumption:

AC 120V 60Hz

Operation: 75W

Standby: 5W

Weight:

24.3lbs (11.0 kg)

Dimensions:

Width: 14-1/4 inches (362 mm)

Height: 15-1/16 inches (382 mm)

Depth: 14-3/8 inches (365 mm)

5° - 40°C

Operating temperature:

Operating humidity:

Less than 80%

TELEVISION

Picture tube:

Type 13 (335 mm diagonal)

Tuner type:

Quartz PLL Frequency Synthesized

Receiving channels:

VHF

2-13

UHF 14-69

CATV14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99 (A-5)-(A-1)

100-125 (100)-(125)

01 (5A)

Antenna input:

Speaker:

Audio output power:

VHF/UHF In 75 ohm coaxial

1-1/2" x 2-11/16" (38 mm x 68 mm), 8 ohm x 2

1.5W + 1.5W

DVD/CD player

Signal system:

Applicable disc:

NTSC

1. DVD (12cm, 8cm)

2. CD (12cm, 8cm)

Audio characteristics:

Frequency response:

Input:

DVD: 4Hz - 22KHz

CD: 4Hz - 20KHz

Video :(RCA) 1 Vp-p/75ohm

Audio :(RCA) –8 dB/50Kohm

0.5Vp-p 75ohms terminated

CD :Wavelength: 775 - 815 nm

Maximum output power: 0.5 mW

DVD :Wavelength: 650 - 666 nm

Maximum output power: 2.0 mW

Digital audio out:

Pickup:

ACCESSORIES:

Remote control x 1

Batteries (2 x AAA)

300 - 75 ohm Matching Transformer

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION

AND DVD/CD PLAYER

Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited

warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set

as a gift from the original consumer purchaser and to no other purchaser or transferee .

Limited Ninety (90) Day Warranty

TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of

ninety (90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective

product or part, without charge to you.You must deliver the entire set to an Authorized TACP/THI Service

Station.You pay for all transportation and insurance charges for the set to and from the Service Station.

Limited One (1)Year Warranty

TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of

one year after the date of original retail purchase. During this period TACP/THI will replace a defective part

without

charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail

purchase

you pay labor charges involved in the replacement.You must also deliver the entire product to a TACP/THI

Authorized Service Station.You are responsible for all transportation for the set to and from the Service Station.

Limited Two (2)Year Warranty of Picture Tube

TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a

period of two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a

defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90)

days from the date of the original retail purchase, you pay labor charges involved in the replacement.You are

responsible for all charges involved in the replacement. you are responsible for all transportation and insurance

charges for the set to and from the Service Station.

Rental Units

The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental

firm, whichever comes first.

Commercial Units

Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture

tube.

Owner's Manual and Demographic Card

You should read this owner's manual thoroughly before operating this product.You should complete and mail the

enclosed Demographic card within ten days after you, or the person who has given you this product as a gift,

purchased this product. This is one way to enable TACP/THI to provide you with better customer service and

improved products. Failure to return the Demographic card will not affect your rights under this warranty.

Your Responsibility

The above warranties are subject to the following conditions:

( 1 ) You must retain your bill of sale or provide other proof of purchase.

( 2 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.

( 3 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.

( 4 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair

antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna sys-

tems are your responsibility.

( 5 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any

product or parts which have been lost or discarded by you or to damage to products or parts caused by

misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power,

improper installation, improper maintenance or use in violation of instructions furnished by us; or to units

which have been altered or modified without authorization of TACP/THI .

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION

AND DVD/CD PLAYER

How to Obtain Warranty Service

If after following all of the operating instructions in this manual and checking the section "Problems and

troubleshooting" and you still find that service is needed;

( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find

the nearest Toshiba Authorized Service Station.

( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.

"TACP/THI Authorized Service Station personnel will come to your home when warranty service is

required. Depending on the type of repair required, the service will either be performed in your

home or the set will be taken to the TACP/THI Authorized Service Station for repair and returned to

your home at no cost to you"

In the Continental United States contact:

In Hawaii Contact:

Toshiba Hawaii, Inc

327 Kamakee Street,

Honolulu, Hawaii 96814

(808) 591-8377

Toll Free

1-800-631-3811

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular

purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any

warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warran-

ties,

guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replace-

ment of

any parts. In no event shall TACP or THI be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these

warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-

tion of TACP or THI arising under this warranty or under any statute, or law of the United States or any state

thereof, is here by limited to 90 days from the date you discover or should have discovered, the defect. This

limitation does not apply to implied warranties arising under state law.

This warranty gives you specific legal rights and you may also have other rights which may vary from state to

state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be

brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not

apply to you.

ATTENTION CANADIAN CONSUMERS:

Canadian consumers are requested to complete the special Canadian "Warranty Registration

Form" enclosed, and forward this completed form with a copy of bill of sale to TOSHIBA OF

CANADA to "Register and Validate" their warranty.

Products purchased in the U.S.A. and used in Canada are not covered by these warranties.

Products purchased in Canada and used in the U.S.A. are not covered by these warranties.

Rev. 09-01-98

Download from Www.Somanuals.com. All Manuals Search And Download.

J5E60301A U

03/01

Printed in Thailand

Download from Www.Somanuals.com. All Manuals Search And Download.

Toastmaster Double Oven CO36 User Manual
Tokina Camera Accessories TC0412DC User Manual
Toshiba Computer Drive MK4008GAH User Manual
Traulsen Freezer Traulsen Quality Refrigeration User Manual
Troy Bilt Blower 769 06521 P00 User Manual
Uniden Cordless Telephone ANA9620 User Manual
Universal Remote Control Universal Remote UR P95TVE User Manual
Univex CRT Television 21PT6441 User Manual
ViewSonic Digital Photo Frame VFD1028W11 User Manual
Vizio Projection Television M420NV User Manual